Over 1 million tech questions and answers.

the request could not be performed becoz of an i/o error

Q: the request could not be performed becoz of an i/o error

i tried to format my pendrive to make a bootable disk in order to install windows xp. suddenly this error ocurred and since then these error are show as in the pic whenever i try to reformat.

i tried to clean using diskpart but it shows the request could not be performed becoz of an io device error and whenever i try to enter the pendrive it shows, the device is write protected.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: the request could not be performed becoz of an i/o error

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 78.4

Did u get any solution for that ..becos i am also faincg the same problem..Please let me know once you get the remedy

#1 02-Jan-2007 05:03 PM - D:// The request could not be performed because of an I/O device error.
taina

Member Posts: 56
Join Date: Jan 2005
Experience: Computer Illiterate

I am looking for help. I have a Toshiba Satellite A105-s4164 Window XP SP 2 Media Center Edition purchased in August. Just last night I noticed that my (D) Drive which is my DVD-RAM Drive as it reads now is not working correctly. I can play DVD's but it does not recognize CD-R/RW CD's nor actual Audio CD (retail). I seem to think that at an earlier time the Drive use to read CD-R/RW drive. ??? Could it just be the setting? The DVD-RAM is a Matshita DVD-RAM UJ-841S.

I have gone through the forum and tried out all the suggestions I could find. Still the problem exist.

When attempting to copy files to a CD I recieve this message: The request could not be performed because of an I/O device error.

After going through all of the suggestions I could find I decided to do a full recovery (factory) and the problem is still there.

I have gone through Record Now! and Window Media Player using an Audio CD (retail) and I recieve the following message disk empty or drive busy. When I open the file nothing is there.

Please help. This is driving me bonkers.

Thanks in advance.
 

A:Request could not be performed because of an I/O device error

Even though it appears you're having the same problem, please start a new thread when you have a new issue. It's very difficult to keep two problems straight and who's working on what in a single thread.

I've created a new thread for your issue here.

Thanks for your cooperation.
 

Read other 1 answers
RELEVANCY SCORE 78.4

Hi There,
Am deleting a folder on my hard drive but the error "Request Cannot be performed because of an i/o device error".

This is how I can up with this error.

This file[folder] was copied from another machine to me machine. After sometime me machine started slowing down. Then it became so frequent.
I did a scan using AVG but as soon as the scan reached this folder, it hang. I did a check disk with /f and /r attributes and it hang at this files/folder.

I removed the hard disk, slaved it on another [perfectly working] machine and seem to hand as well.

Please am sure someone out there has a get around. Please if you do, kindly appreciate your assist.

ODAU
 

Read other answers
RELEVANCY SCORE 78.4

I have a Flash Memory 8GB. I can't Format it, i try format it with of DISK Managment and Command Prompt but i can't.


please help me, tnx

A:The request could not be performed because of an I/O device error

Sounds like a bad flash drive to me. Is this the only flash drive giving you problems?

Have you tried a different USB port?

What information is provided in the Event log (the cmd prompt window you posted indicates ther is more information)

Read other 4 answers
RELEVANCY SCORE 78.4

I have a kingston 8GB microSD, i thought it was dead, but that was just my adapter, so now i have a new one. I am using a MicroSD -> SD -> SD USB reader.

When i stick it in, the device appears empty, i have to pull the MicroSD and SD adapter and reinsert them back into the USB reader for it to be recognized.
After my computer recognizes it, If i go to my computer in windows explore, it lags for a while if i right click or double click on the drive. After that, i can't access it at all, a little while later (regardless of weather the SD lock is on or off) i get:
M:\ is not accessible.

The request could not be performed because of an I/O device error.
I have tried various formating utilities, some tend to crash, and i think the microSD has actually caused a couple BSOD's.

Im wondering if anybody has a solution, or some good format utilities to try. I am not to determined because it is an Asian (no offence!) brand, and they tend to not last long. I am also planning on replacing it with a 4gb version for better compatibility.

Running WinXP SP3, same thing seems to happen if I am on Win7, just without the error, explorer just kinda freezes if i try to access it, i haven't spent much time waiting.

EDIT:
If it helps, DS lite's with M3's do recognize and allow me to load a few pictures i managed to get on before this started happening (a few days after i got it and before my SD adapter died), but if i try a game it just doesn't loa... Read more

Read other answers
RELEVANCY SCORE 78.4

I had a 1TB WD Mypassport but having problem with corrupt Master Boot Record
Tried to repair my external hard drive using

bootrec /fixmbr
bootrec /fixboot

but i got this error message

"The request could not be performed because of an I/O device error"

any other alternatives?

OS: windows 8

A:The request could not be performed because of an I/O device error

Hi tzakuzi,

Welcome to Seven Forums.

A fundamental question: What made you to decide that you have a problem with corrupt master boot record? What was the effect of such " corrupt master boot record" that made you sit up and take any corrective measure?

Is your external HDD not accessible?

Was it accessible before?

Have you tried it on other USB ports?

Have you changed the cable and tried?

Have you tried that HDD on any other PC and with what result?

If your ext HDD shows up Windows Disk Management, please post a screenshot.

I know, too many questions . But let us get a complete picture.

( If your PC has Windows 8 64bit, why did you not raise the query in Windows 8 Forum?)
A missed question added now. Do other external drives work on the machine?

Read other 6 answers
RELEVANCY SCORE 78.4

I am looking for help. I have a Toshiba Satellite A105-s4164 Window XP SP 2 Media Center Edition purchased in August. Just last night I noticed that my (D) Drive which is my DVD-RAM Drive as it reads now is not working correctly. I can play DVD's but it does not recognize CD-R/RW CD's nor actual Audio CD (retail). I seem to think that at an earlier time the Drive use to read CD-R/RW drive. ??? Could it just be the setting? The DVD-RAM is a Matshita DVD-RAM UJ-841S.

I have gone through the forum and tried out all the suggestions I could find. Still the problem exist.

When attempting to copy files to a CD I recieve this message: The request could not be performed because of an I/O device error.

After going through all of the suggestions I could find I decided to do a full recovery (factory) and the problem is still there.

I have gone through Record Now! and Window Media Player using an Audio CD (retail) and I recieve the following message disk empty or drive busy. When I open the file nothing is there.

Please help. This is driving me bonkers.

Thanks in advance.
 

A:D:// The request could not be performed because of an I/O device error.

If you've done a Factory Restore and the problem persists then the drive has physically failed. I think its time to use that warranty that came with the laptop.
 

Read other 2 answers
RELEVANCY SCORE 78.4

The message from my effort to read and write to my floppy drive also said "A:/ not accessible." I assumed (correctly?) the drive was the input/output device.

I checked power and data cables: both tightly seated. I know the drive is getting power; the green light on front lights, though I don't suppose that is proof it's getting all the power it should or where it should.

I checked my BIOS in case that had somehow inactivated it. But my BIOS only listed the A drive-no options offered.

I went to Device Manager, deleted driver, rebooted. Problem continued.

I tried a different floppy drive, with the same results. And I tried read/write operations with 2 different floppies, with both drives.

Exactly the same results as with the new physical drive..

What can I do now? (O/S is XPSP2). Replace the motherboard?
 

A:Request could not be performed because of an I/O device error

Read other 16 answers
RELEVANCY SCORE 78.4

Hi Guys and Gals of the forum

I need some help.

My son has all his college stuff on the pen and when we plug it in we get this error message.

H:\ is not accessible.
The request could not be performed because of an I/O device error.

Have tried on other systems ranging XP Professional, VISTA Home, Windows 10 not working on any.

--------------------------------------------
I have tried the following Diskpart, drive does not show up

Microsoft Windows [Version 10.0.10586]
(c) 2015 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>diskpart
Microsoft DiskPart version 10.o.10586
Copyright (C) 1999-2013 Microsoft Corporation,
On computer: ROBERTS-PC
DISKPART> list disk
Disk ### Status
Disk 0 Online
Disk 1 Online
Size Free Dyn Qpt
931 GB OB
931 GB OB
DISKPART>

-------------------------------------------
I have tried CHKDSK but get the following error message

Microsoft Windows [Version 10.0.10586]
(c) 2015 Microsoft Corporation. All rights reserved.
C:\wiNDOWS\system32>chkdsk h:
Cannot open volume for direct access.
C:\WINDOWS\syste?i32>

-----------------------------------

Would appreciate any help in getting access to his data

A:The request could not be performed because of an I/O device error.

Whatever you do, do not do anything that will cause a write action upon that pen drive until after the folders and files have been successfully copied off of that pen drive and onto an SSD or platter-driven hard-drive.

Read other 8 answers
RELEVANCY SCORE 78.4

Hi

I recently did a clean install of W7 Professional. I installed W7 first on the SSD. Once the operating system was running I then proceeded to add the internal HDD (500G Seagate). Unfortunately the system just does not seem to recognise the HDD.

Device Manager:
In Device Manager->Disk Drives:
Drive 1: W7 sits on my 64G SSD and has the location 1 (1).
Drive 2: The 2nd drive is an internal 500G HD that has the location 0 (0). The drop down box of Device Usage shows: "Use this device (enable)"

Disk Management
I went to the Disk Management but:
a) only the Disk 1 is showing
b) it is does not appear to be seeing the 2nd disk

Computer Management
I went into Computer Management and tried to enable the Disk. Unfortunately it has come up with "The request could ot be performed because of an I/O device error"

The HD is an intertnal HD with Sata connectors.

1) I changed the Sata ports but still no difference
2) Windows says the drivers have loaded correctly and the device can be used
3) I ran the Trouble Shooter but no issues were found.
4)The same issues as above are occurring. Please see images below:

http://img.whirltools.com/i/10123250637995193183.png
http://img.whirltools.com/i/04344170743993264509.png

Low Level Format
Additionally I have tried to run a low level format. The software picked up both drive but when I went to format the drive i get the error below (see attachment)

http://img.whirltools.com/i/45491907152525965670.png

Power
Finally ... Read more

A:HDD Error: The request could not be performed because of an I/O device

Download and run Seatools in DOS mode from CD and see what this brings up! Sounds like a DOA HDD!! The issue isnt with it being recognised as it clearly is in device manager but it being written to hence the I/O error!

Read other 4 answers
RELEVANCY SCORE 78.4

I have searched here and googled this error, and while I have found similar, nothing that same as this.

I have been unable to update my Itunes, so after some research I realized it was the failure to update quicktime durring the Itunes update that was really happening. I have tried multiple things to fix this, all of which have been unsuccessful. Nothing would tell me why, just that quicktime failed to update.

My next step was to uninstall quicktime, this also failed with no reason why. So I attempted to Manually delete all quicktime files, and then run tuneup utilities to remove all registry entries. However when doing this I found I could delete all files, except the folder c:\Program Files\QuickTime\QTSystem\QuickTimeStreaming.Resources\de.lproj . When I try I get the below error message
Code:
Cannot delete de.lproj: The request could not be performed because of an I/O device error
When I try to go into the directory de.lproj I receive the this error message.
Code:

c:\Program Files\QuickTime\QTSystem\QuickTimeStreaming.Resources\de.lproj is not accessible.
The request could not be performed because of an I/O device error.

I have tried doing it from a different user, I have tried from safe mode but just keep getting the same I/O device error. I have looked in the device manager and no errors there either. changing the permissions and ownership but am unable to do that as well. I have run a virus scan and rootkit scan with avg and a scan with Super Anti Spyware. All... Read more

A:The request could not be performed because of an I/O device error

hiya,maybe this could be of use
It sounds as though the file referred to in the error message is corrupt and Windows cannot read it.

Try running a disk check. If it finds and fixes errors, try reininstalling. If not it it doesn't work, go on to the next step.

Try renaming c:\programfiles\commonfiles\apple\mobile device support\syncservices\schemas\calendars.syncschema\contents\windows\calendars.exe as ...calendars.old.

If Windows will not allow that, then rename the containing folder.

This should allow the install to proceed as it will not see the corrupt file.
 

Read other 2 answers
RELEVANCY SCORE 78.4

I've been currently using a 600gb SATA HDD for my OS etc and everything else. I decided to put in my other SATA 320gb HDD as I am going to need more space (Recording with my hd capture card takes up alot of space!). I put it into the HDD bay, plugged both the SATA cable and power cable into it. I turned on my PC and it read it and said it was set to go. I went into Computer Management to set it up and a window popped up saying I needed to initialize Disk 1 being the drive, so I clicked ok. It freezes for a second and then a small box pops up saying "The request could not be performed because of an I/O device error." Please help, I am very smart with computers for the main concept however HDDs are actually one of the only things I'm not very experienced with. Thanks guys! I appreciate any support. I am using Windows 7 64 bit OS in case that matters.
 

A:NEW HDD - The request could not be performed because of an I/O device error.

OK, first of all, we have no idea what you are working on. Post your exact system specs ie make and model of mb, cpu, amount of ram, etc. If this is a big box system, then post the make and model.

Have you rechecked/reseated both pw and data connections for the drive?

Have you tried a different sata cable and or a different sata port on the mb?
 

Read other 1 answers
RELEVANCY SCORE 77.6

I was trying to back-up a file to CD using the CD Writer on my computer when I kept getting the message: The request could not be performed because of an I/O device error. Does anyone know what this means and how I can correct this situation? Thanks in advance.
 

A:Solved: The request could not be performed because of an I/O device error.

Read other 16 answers
RELEVANCY SCORE 77.6

Well, I bought a new DVD drive yesterday and when I insert a disk it reads and I can browse through the discs contents but whenever I try to copy something it freezes for a few seconds and I can see the little light flashing violently on the device and when I get past that and try to put it on my desktop I get "Cannot copy XXXX. The request could not be performed because of an I/O error." I have tried using both cds and dvds, the oddest thing of this all is the drive allowed me to burn a CD, and this CD is working perfectly. My drive is called TSSTCorp CDDVDW SH-S222A in the device manager and the box for it says it is a RetailPlus+ DVD+/-RW.
 

A:Cannot copy XXXX. The request could not be performed because of an I/O error.

Read other 9 answers
RELEVANCY SCORE 77.6

I am trying to backup server files to another computer on the network. However, I have run into a folder that has a a few thousand small images and every 20 or so image copy pops the error "Cannot Copy ****: The request could not be performed because of an I/O device error." Instead of doing a mass transfer of these image files I now have to try to copy the single file that pops up this error over and over again by drag n drop until the error goes away. I don't know what is causing it and I don't know why after about 5-10 min of repeated copying attempts it suddenly has no problem with the exact same file and another file suddenly can't be copied across the network in that folder.

Any ideas what is going on here?

I have already tried running repairs on the hard disks in question.

A:Cannot Copy ****: The request could not be performed because of an I/O device error

Look in the event viewer under computer management in the control panel. Click on sytem to see if you have any hard disk errors. You may also ahev a memory problem.

Read other 5 answers
RELEVANCY SCORE 77.6

After I startoff my computer from fresh and I go to Run via Start>Run and I insert a disk into the floppy drive A://, and I try opening the drive folder, I get an error message saying " A:// is not accessible. The request could not be performed because of an I/O device error." Then when I click OK and I try opening the folder again I get no error message. I only get the error message when I open the folder for the first time after the computer has been restarted. The second time I try without restarting the computer, works.

Why do I get the error message in the first place????????
 

A:Solved: A:// The request could not be performed because of an I/O device error.

This might apply:

http://support.microsoft.com/kb/811839

Are you running SP1? If not, you should check to see if there is a BIOS update which corrects this, or some setting you can change through the CMOS Setup utility to modify the PromoteLimit Value your system uses as the CPU moves into a deeper idle state. You might have to disable that setting completely before you can resolve this, but we won't know that until you research it.

Or, you might simply choose to live with it...
 

Read other 2 answers
RELEVANCY SCORE 76

Hey guys, I posted a thread a while back. Once I rip my music into windows media player, what I would normally do is drag the mp3s into my mp3 player and they would copy over fine. Its not the case with Vista 64. It sometimes copys the first track of an album then comes up with Error 0x8007045D This request could not be performed
because of an I/O device error.

Any advice?
Cheers

Read other answers
RELEVANCY SCORE 52

I want ask that "Can I ask activate my windows XP product via online can more than once?"

When I buy my NEW PC, I need to install the OS and activate it (This is the first time activated)

Because my PC now was damaged heavily, need to format again and install OS again. I have an experience on using the the llegal OS CD and llegal product key on other computers.... But the activation can't be succeed...

Now I haven't try the OS CD on my PC. If I install OS and llegal key use on the my PC that same package with CD and product key multiple times, will the activation successful?

Anyway, need ur help please Can activate more than once?

A:can activate OS via online multiple times becoz of reformatting.??

Yes you can activate more than once.

Read other 2 answers
RELEVANCY SCORE 50.8

I'm not sure if this should be posted here, since I guess that it is a systems failure issue.
I am having some major issues with attempting to do a backup of all my system drives - all attempts have failed.
What I have done so far;
Tried to do a Windows backup from my laptop to a Passport external hard drive - first failure.
Failed again when I tried another Windows backup, this time to an Imation external hard drive - second failure.
Did an Administrator CHKDSK/R on the Laptop hard drives, and both external hard drives. All came up clean.
Tried to do two more alternative backups using Macrium Reflect - both similarly failed.

After each failed backup, all attempts got messages similar to the following;

I'm not sure,but the following files may also be helpful in fixing this problem; sysdata.zipWERInternalMetadata.zip082715-24538-01.zip
I managed to copy the Macrium Reflect VSS log file to here; Macrium Reflect VSS Log.zip
A couple of the CHKDSK/R Command Results are here; 3. CHKDSK Acer HD 27 Aug 2015.txt 4. CHKDSK My Passport [12 hours scan] 28 Aug 2015.txt
I am not sure if either of the following issues are relevant or have any bearing to the backup issue, but I include all in this post just in case they are. If they are not, please advise and redirect me to where I may get assistance with all.

A:BACKUP ABORTED - not performed because of I/O Device error

About half of my previous post did not make it - part 2 follows

I'm not sure,but the following files may also be helpful in fixing this problem; Attachment 370368Attachment 370369 Attachment 370370
I managed to copy the Macrium Reflect VSS log file to here; Attachment 370361
A couple of the CHKDSK/R Command Results are here; Attachment 370362 Attachment 370363
I am not sure if either of the following issues are relevant or have any bearing to the backup issue, but I include all in this post just in case they are. If they are not, please advise and redirect me to where I may get assistance with all.
Attachment 370364 Attachment 370365 Attachment 370366 Attachment 370367

Read other 1 answers
RELEVANCY SCORE 49.6

Upon Restarting Win98 i get a message that kernels 32 caused an alllegal operaion at some page & upon clicking cancle the system works fine though some programs like maxd1 an rnapp are running in background

Please help
GauravV
 

A:Win98 SE Startup Error-Kernels32 performed illegal operation

Hi, Check your spelling> was the error Kernels32\\ OR> was it kernel32, without any "s"?

Please post a Hijackthis log so we can see if anything needs removing...here is what and how:

dvk01 said:

Getting Hijackthis and installing it correctly

go to here and download 'Hijack This!' double click on the file and it will install to C:\program files\hijackthis and create an entry in the start menu and an optional shortcut on desktop.
Click on the entry in start menu or on the desktop to run HijackThisClick to expand...
First open a reply here in your thread to have it ready.
Run Hijackthis.exe, and
Select the "Scan and save a log" button...

When it is done scanning> the Save box will become available, save the log as hijackthis.txt which will open with Notepad. Hit the EDIT> Select All then the EDIT>Copy button at the top of your log, Go back to TSG, and click once in the blank reply space, then go to the top of your browser window and select EDIT>Paste.
Please do NOT use HJT yourself to remove anything, most of what it shows is good and needed by the system.

If things in the HJT log look OK you are welcome to work on the problem here in this forum, but, if we see some bad malware, your thread may be moved to the Security forum so you can get help easier> it's just the way we work together, nothing that you did!

Post the log and anything else you need to ask, right here in this thread as a Reply, and someone wi... Read more

Read other 3 answers
RELEVANCY SCORE 47.6

Can anyone help. I updated the May Critical updates on 15th May 2015 and then Outlook Stops, and in the Event Viewer for SChannel I get the following


A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 40. The Windows SChannel error state is 808.

I've no idea what 808 is, but the 40 is a handshake error.
Now if I go back to my restorepoint prior to the updates it all works again, until the system does the updates again (all 15 of them). It appears to be something in the updates, but cannot find other people complaining about this. It's also a bit disappointing
that the error state of 808 seems to be undocumented.
Can anyone help?
I have since diagnosed which Patch it is with the problem. It's KB3061518 (MS15-55). Doesn't help much since bing/google aren't telling me about reports of problems with it (apart from a CAD package) running Outlook email workload.

A:SChannel Errors with Outlook 2013 when May 2015 Critical Updates performed. Channel Error is 808 and seems undocumented.

Hi,
After you install this security update, the minimum allowed DHE key length on client computers is changed to 1,024 bits by default, instead of the previous minimum allowed key length of 512 bits.
Please check if the issue can be resolved after revert to using a 512-bit key length.

To edit this registry entry, follow these steps:
1. Click Start, click Run, type regedit in the Open box, and then click OK.
2. Locate and then click the following subkey in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms\Diffie-Hellman

3. On the Edit menu, point to New, and then click DWORD Value.
4. Type ClientMinKeyBitLength for the name of the DWORD, and then press Enter.
5. Right-click ClientMinKeyBitLength, and then click Modify.
6. In the Value data box, type 00000200, and then click OK.
Exit Registry Editor, and then restart the computer.
Can we fix this issue?
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Read other 4 answers
RELEVANCY SCORE 45.2

I'm not sure where my original post went so I'll try again.

Please help, my computer is a mess! See attached HJT log.

I've been getting many error messages saying "This program has performed an illegal operation and will be shut down..."
It does not matter what program I'm running, I get this message all the time. I can no longer access MSN.com, but can access other websites.

I have Windows 98 SE and have run SuperAnti spyware V4.0.1154 and CCleaner V.2.06.567.
Please check this Hijack report and see if there is anything I'm missing that is harming this computer. I used the HP Pavilion recovery disk yesterday after windows became corrupt.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 5:30:17 PM, on 5/9/08
Platform: Windows 98 SE (Win9x 4.10.2222A)
MSIE: Internet Explorer v5.00 (5.00.2614.3500)
Boot mode: Normal

Running processes:
C:\WINDOWS\SYSTEM\KERNEL32.DLL
C:\WINDOWS\SYSTEM\MSGSRV32.EXE
C:\WINDOWS\SYSTEM\MPREXE.EXE
C:\WINDOWS\SYSTEM\MSTASK.EXE
C:\WINDOWS\SYSTEM\MSGLOOP.EXE
C:\WINDOWS\SYSTEM\MSG32.EXE
C:\WINDOWS\SYSTEM\mmtask.tsk
C:\WINDOWS\EXPLORER.EXE
C:\WINDOWS\TASKMON.EXE
C:\WINDOWS\SYSTEM\SYSTRAY.EXE
C:\WINDOWS\SYSTEM\HPSYSDRV.EXE
C:\WINDOWS\SYSTEM\USBMMKBD.EXE
C:\PROGRAM FILES\DIRECTCD\DIRECTCD.EXE
C:\WINDOWS\RunDLL.exe
C:\PROGRAM FILES\SUPERANTISPYWARE\SUPERANTISPYWARE.EXE
C:\PROGRAM FILES\MICROSOFT OFFICE\OFFICE\OSA.EXE
C:\PROGRAM FILES\COMMON FILES\MICROSOFT SHARED\WORKS SHARED\WKCALREM.EXE
C:\PROGRAM FILES\MICRO... Read more

Read other answers
RELEVANCY SCORE 45.2

I just performed a System Restore without disks (as I have done in the past by pressing F10) halfway through the process the computer froze. I hit enter about 40 minutes later and it jumped to a screen that said "Restore successfully completed" i hit enter on the Finish tab for the computer to restart, but it froze again. after about 15 minutes I turned the computer off manually. The computer now says /Windows/system32/winload.exe is missing or corrupt. I can no longer access the restore screen and I was never given recovery discs when I bought the computer from the store. Can I use recovery CD's from another Hewlett Packard computer that runs off of Vista as well? I have the a1730n model and my sister has the a1700n model. Please help!!

A:System Restore performed...result "ERROR"

Okay, so I tried using her recovery discks to see if it would work and it did not It said that the disks could not be used with my computer.

What and where should I look for the software that will allow me to at least get to the recovery options again? Please help me!!!

Read other 2 answers
RELEVANCY SCORE 40.8

When trying to buy online at Macy's.com using IE8, I get the following error message when checking out

Bad Request Bad Request
Your browser sent a request that this server could not understand.
Size of a request header field exceeds server limit.Cookie: CoreM_State=14~1.0~~0~E~6~6~6~10~10~0~0~|~A4E07FF6~293334ED~125C59C1~83CFDC69~55E85D7C~9B1BE5A4~5E15D662~01B32A74~0DAC5BE8~|~92518410~2C2CEE79~467A0768~776B4935~317D37FE~21FCE13C~8B88F720~C1FC4B62~6FD6DC6B~4267869B~|~~|~0~1~2~3~4~5|3~4~5~6~7~8||0~1~2~3~4~5~6~7~8~9|16~89~3~19~5~60~1~17~10~39||; macys_online=5533876198; macys_online_uid=
--------------------------------------------------------------------------------

IBM_HTTP_Server at www.macys.com Port 80

I have cleared out history and cookies multiple times, but still get this error message. It only happens on Macys website. I tried calling Macy's tech support but never got a person. I am running Windows 7. Can anyone help? Thanks!
 

Read other answers
RELEVANCY SCORE 40.8

I'm using Firefox 3.5 with Windows XP Home. For the past several days when I try logging in to my Google Adsense account, I receive a Bad Request 400 Error message. I have used Advance System Care Pro to fix registry errors, but still have the same problem.
Any ideas?
Thanks
 

Read other answers
RELEVANCY SCORE 40.8

Some of you may remember this thread - IE HTTP 400 Bad Request


Well, one month ago I replaced the router. Error stopped on all computers. Only, now I'm getting the error again. *sigh* And once again, its only on deviantart.

Nothing has changed. Absolutely nothing.

No, wait, I take that back. I went to Arizona to visit my family for 3 weeks. Came back just over a week ago on the 12th. This started on the 20th or so.


Think it has any connection? Same brand of router, its just my parent's router is older and the connection is much slower.

A:IE 400 Bad Request Error Again

  
Quote: Originally Posted by ACWN


Some of you may remember this thread - IE HTTP 400 Bad Request
Well, one month ago I replaced the router. Error stopped on all computers. Only, now I'm getting the error again. *sigh* And once again, its only on deviantart.

Nothing has changed. Absolutely nothing.


In the other post you said:
"So, we returned it to Best Buy. We shouldve waited just a week longer though. Linksys came out with an updated version of the router we have and a week after we replaced it, they had a sale for the updated router at the (sale) price we bought the old one. *sigh*. "

Maybe they updated it for a reason. Perhaps you should switch to the updated one.

Read other 9 answers
RELEVANCY SCORE 40.4

hi guys, barneystinson here, whaddup? anyways everytime i try to open winamp or ccleaner i get this message "C:\Windows\system32\NLAapi.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support." i've ran command prompt as admin and did sfc/scannow on the c drive, i've done the check disk utility on the c drive, i've scanned my pc with avg and found no infections, i've cleaned my registry with free registry cleaners ran ad aware and spybot search and destroy and i still have this error, its pissing me off, if any of you guys could help me out that'd be awesome, here's my hijackthis.log file

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:15:39 PM, on 7/27/2009
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v7.00 (7.00.6002.18005)
Boot mode: Normal

Running processes:
C:\Program Files (x86)\ASUS\SmartLogon\sensorsrv.exe
C:\Program Files (x86)\ASUS\ASUS Live Update\ALU.exe
C:\Program Files (x86)\Common Files\LightScribe\LightScribeControlPanel.exe
C:\Program Files (x86)\DNA\btdna.exe
C:\Program Files (x86)\DAEMON Tools Lite\daemon.exe
C:\Program Files (x86)\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files (x86)\CyberLink\Power2Go\CLMLSvc.exe
C:\Program Files (x86)\ASUS\ATKOSD2\ATKOSD2.exe
C:\Program Files (x86)\ASUS\ATK Media\DMedia.exe
C:\Wi... Read more

A:bad image error, request help

so no one's gonna help me on this? *bump please*
 

Read other 1 answers
RELEVANCY SCORE 40.4

Hi guys, barneystinson here whaddup? I have a problem with my laptop, every time i open up winamp or load up dawn of war i get this error message "C:\Windows\system32\NLAapi.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."

if any of you guys could help me out solve this problem that'd be awesome, alright later.

A:bad image error, request help

This is normally a file that affects your Internet connection (a Winsock2 file).
It's either corrupted or you're infected.

Have you performed any independent scans to ensure that you're not infected? If not, here's some free, online scans to try: http://usasma.vox.com/library/post/f...d-09mar08.html

Once you're sure that you're not infected, then follow the steps at this link to fix any corruption in your Winsock2 entries: http://support.microsoft.com/kb/811259

Read other 5 answers
RELEVANCY SCORE 40.4

Just few hours back I could not see or open any mail on my yahoo account. the above message reads "Request Error (unsupported _protocol) how to fix this problem............urgent .............tks

Read other answers
RELEVANCY SCORE 40.4

whenever i open my system a message box is appearing in the desktop showing"Cannot find script host,cannot find c\windows\winsys64.vbs".I am very much frustrated by this.So please post a solution immediately.

A:request to solve error

whenever i open my system a message box is appearing in the desktop showing"Cannot find script host,cannot find c\windows\winsys64.vbs".I am very much frustrated by this.So please post a solution immediately.

Read other 3 answers
RELEVANCY SCORE 40.4

Hello

This morning the following message appeared on my desktop and I'm at a bit of a loss.
I proceeded to update drivers but I was informed that everything is up to date. I haven't experienced this problem before so I'm asking for help in resolving it.

Thank you.

Read other answers
RELEVANCY SCORE 40.4

I have purchased a peice of software(Squeeze Page Wizard),and my problem is,i cannot
install the software. In the setup wizard,i am getting a message with a white cross in a
red circle background: headed File Download with the following message -error sending
request.a connection with the the server could not be established,which is in an oblong
box.

If anyone can assist,i will appreciate it.Thanks

Sincerely

Keith Cooper
 

A:Error Sending Request

I checked via Google and in January 2009 they were giving away free versions.
Since you have bought it I think the logical way is to get their support or maybe there is a FAQ list somewhere to help you troubleshoot.
As far as I can make up from your post is that you do not have a connection to some ftp site or something so I am thinking it's a setting that is not correct or not allowed
 

Read other 2 answers
RELEVANCY SCORE 40.4

I have received this error with one site that I wanted to visit. How can I get rid of this so that the intended site can be viewed?

A:http/1.1 bad request error

what is web site let me try from here.

Read other 9 answers
RELEVANCY SCORE 40.4

I am running w/2000 professional, 667mhz pentium III, 256 megs ram. I keep getting blue screened with the message "Multiple IRP requests complete, beginning dump of memory" then there are what I assume are memory addresses, the 000000009f type stuff.

I have to use my reset button as nothing happens until I do.

Any help would be appreciated.
 

A:Multiple IRP request error

Read other 11 answers
RELEVANCY SCORE 40

running vista business 32 bit. i have internet accesss and can browse but malware can not do an update, and avg will not install. it wants proxy server settings. combofix found something but there problem is still here. malware found thisFiles Infected:c:\Qoobox\quarantine\C\Windows\System32\helper32.dll.vir (Trojan.BHO) -> Quarantined and deleted successfully.attached are the dds, attach and ark logs.Edit: Moved topic from Vista to the more appropriate forum. ~ Animal

A:winhttpsend request error 12029

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. You can subscribe by clicking the Options box to the right of your topic title and selecting Track This Topic.

Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.

Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

Read other 3 answers
RELEVANCY SCORE 40

Hello, I have been getting stop error code 44 with multiple irp request complete. It has gotten so bad that now the computer won't even finish loading windows before the bsod. Sometimes I can get to full startup and then the bsod will show up. This happens also in safe mode with or without networking. I have tried dell support and their answer is to reinstall the operating system which I am loath to do. I have disconnected all external usb devices and have done a system restore all to no avail. Is there any help before I completely reinstall? My system is a dell inspiron 9400 with xp mce 2005 service pack 3. All virus and spyware checks report clean.

Read other answers
RELEVANCY SCORE 40

My site uses ajax to replace some html upon user reset or page refresh. It still works fine with IE and has been with Firefox, but not anymore. Upon sending the http request, I get the below error. It means nothing to me. Can anyone interpret this into English?

Error: uncaught exception: [Exception... "Component returned failure code: 0xc1f30001 (NS_ERROR_NOT_INITIALIZED) [nsIXMLHttpRequest.send]" nsresult: "0xc1f30001 (NS_ERROR_NOT_INITIALIZED)" location: "JS frame :: javascript: eval(__firebugTemp__); :: anonymous :: line 1" data: no]

Read other answers
RELEVANCY SCORE 40

Iam not ale to open my Hotmail Account.It is Vista Home premium.Iam using Nod32 antivirus.In Firefox also the same thing.

Read other answers
RELEVANCY SCORE 40

I have to reboot my laptop after surfing the 'net and trying to log on again later in the day. I think I've seen a quick flash at the bottom of the screen that says something about SHDOC ???, so what would the problem be? What can I do to keep from having to reboot 2 -3 times a day?

Thanks in advance for any solutions!
Peach
 

Read other answers
RELEVANCY SCORE 40

xp pro sp2
ati catalyst 1.2.2405.30455

after install of ati radeon x1650, I started getting 49 script errors. 49 error windows stacked on top of each other. It happened various times, in different apps.
during boot, i get the runtime error,

microsoft visual c++ runtime library
program: c:\...
requested to terminate in an unusual way

I use Yahoo mail, it uses a helper app. that "has a problem" and must close.
(something to do with scripts?)

Internet Exp. has tons of problems with most websites.
flash doesn't work, no page redirects, etc.
Microsofts valdation tool doesn't seem to work either. (Handy)

Read other answers
RELEVANCY SCORE 40

Getting Error:

“Can’t move the items. The item could not be saved because it has been modified by another user or in another window”.

When trying to move a meeting request to an earlier time? (Exchange Server)
Outlook XP
 

Read other answers
RELEVANCY SCORE 40

An error occurred while creating the certificate request. Please verify that you selected the correct CSP, or contact an administrator for assistance. Suggested cause:
No suggestion.Error: 0x80070005 - (unknown)

A:certificate request Error: 0x80070005

Hi, florina, and welcome to the forums.

I understand that this is an error message, but how many times has it occurred? What are you hardware specs? What software do you have installed? What antivirus, antimalware and antispam do you have installed? have you scanned with those? Can you post a screen shot of the error? If you need help using the snipping tool to create a screen shot see How to Use the Snipping Tool in Vista

In general just post info about the error message is not going to be helpful enough, because we need to know what you were doing, what caused the error, and the frequency of the error, and if it is reproducible.

Read other 6 answers
RELEVANCY SCORE 40

Help!!!!!
Does anybody know why I get an HTTP/1.1 Bad Request Error Message and more importantly how do you fix the problem. Is it a Windows Vista problem or some type of Virus that I picked up. It seems to happen the most when I am on Ebay!

Any help would be GREATLY APPRECIATED.

BOBLO.

A:How Do I Fix HTTP/1.1 Bad Request Error Message...

Quote:





Originally Posted by Boblo


Help!!!!!
Does anybody know why I get an HTTP/1.1 Bad Request Error Message and more importantly how do you fix the problem. Is it a Windows Vista problem or some type of Virus that I picked up. It seems to happen the most when I am on Ebay!

Any help would be GREATLY APPRECIATED.

BOBLO.




Try,

1. Open IE
2. Select Tools then Internet Options
3. Select Advanced tab then disable both Use HTTP 1.1 and Use HTTP 1.1 through proxy connections
4. Click Apply and select General tab
5. Click Delete on Browsing history section click OK to exit
6. Close IE and restart your IE then go to eBay to test it.

Read other 1 answers
RELEVANCY SCORE 40

Hi guy, barneystinson here whaddup? anyways every time it try to load up winamp i get this error message "C:\Windows\system32\NLAapi.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support." This doesn't just happen with winamp but with other programs as well. Anyways, I ran AVG and i found no viruses, i ran command prompt as an admin and ran the check disk utility only to find that it reported there's nothing wrong with my hard drive, i then ran sfc/scannow as an admin in the command prompt, it went up to 48% and this showed up "windows resource protection found corrupt files but was unable to fix some of them" I then ran Hijack this, here's a copy of the log after the scan.


Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 11:02:44 PM, on 8/3/2009
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v7.00 (7.00.6002.18005)
Boot mode: Normal

Running processes:
C:\Program Files (x86)\ASUS\SmartLogon\sensorsrv.exe
C:\Program Files (x86)\ASUS\ASUS Live Update\ALU.exe
C:\Program Files (x86)\Common Files\LightScribe\LightScribeControlPanel.exe
C:\Program Files (x86)\DNA\btdna.exe
C:\Program Files (x86)\DAEMON Tools Lite\daemon.exe
C:\Program Files (x86)\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files (x86)\SafeConnect\scClient.exe
C:\Program Files (x86)... Read more

A:vista bad image error, request help

Hello and welcome to TSF.

HijackThis is no longer the preferred initial analysis tool in this forum.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Read other 1 answers
RELEVANCY SCORE 40

Norton Internet Security has been reporting that it blocks an intrusion attempt from a variety of addresses and reports the risk name as either HTTP Tidserv Request or HTTPS Tiderv 2 Request. I get a few unrequested webpages, but the main symptom is the warning messages from Norton. In attempting to fix the problem myself, I learned that I can not boot to Safe Mode because my system hangs at amdagp.sys and returns to the "how would you like your computer to boot" screen. I think this is an unrelated problem, but thought I'd mention it.Thanks! I appreciate your time.DDS (Ver_10-03-17.01) - NTFSx86 Run by Ann Nymous at 23:19:25.80 on Sun 04/18/2010Internet Explorer: 8.0.6001.18702Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.2047.1534 [GMT -5:00]AV: Norton Internet Security *On-access scanning enabled* (Updated) {E10A9785-9598-4754-B552-92431C1C35F8}FW: Norton Internet Security *enabled* {7C21A4C9-F61F-4AC4-B722-A6E19C16F220}============== Running Processes ===============C:\WINDOWS\system32\svchost -k DcomLaunchsvchost.exeC:\WINDOWS\System32\svchost.exe -k netsvcssvchost.exesvchost.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\spoolsv.exeC:\Program Files\BroadJump\Client Foundation\CFD.exeC:\WINDOWS\system32\spool\drivers\w32x86\3\hpztsb04.exeC:\Program Files\Hewlett-Packard\PhotoSmart\Photo Imaging\Hpi... Read more

A:http tidserv request and https tidserv2 request

Hello and and Welcome to BleepingcomputerPlease note we are very busy, so if I don't hear from you within 5 days the topic will be closed, If you have sinceresolved your issues I would appreciate if you would let me no so I can close this topic.Please download ComboFix from one of these locations:Link 1Link 2* IMPORTANT !!! Save ComboFix.exe to your DesktopDisable your AntiVirus and AntiSpyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our toolsDouble click on ComboFix.exe & follow the prompts.As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's strongly recommended to have this pre-installed on your machine before doing any malware removal. It will allow you to boot up into a special recovery/repair mode that will allow us to more easily help you should your computer have a problem after an attempted removal of malware.Follow the prompts to allow ComboFix to download and install the Microsoft Windows Recovery Console, and when prompted, agree to the End-User License Agreement to install the Microsoft Windows Recovery Console.**Please note: If the Microsoft Windows Recovery Console is already installed, ComboFix will continue it's malware removal procedures.Once the Microsoft Windows Recovery Console is installed, click on Yes, to continue scanning for malware.When finished, it wi... Read more

Read other 16 answers
RELEVANCY SCORE 40

Please help. My computer is constantly being attacked (HTTP Tidserv Request & HTTPS Tidserv Request 2). I do not know how to keep this from happening. I've been letting others use my laptop (my first mistake), and about a week ago this all started happening. Needless to say, I'm concerned as I don't know how much damage these attacks can do. My Norton Anti-Virus/Internet Security has been blocking the attacks, but they come constantly from several attacking IP addresses and URLS. Below please find my dds.txt and attached my attach.txt and gmerlog.log as instructed. Thank you in advance for your assistance, and I look forward to hearing from someone.DDS (Ver_10-03-17.01) - NTFSx86 Run by MY NAME at 20:01:23.87 on Wed 08/25/2010Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_12Microsoft Windows XP Professional 5.1.2600.2.1252.1.1033.18.1014.132 [GMT -4:00]============== Running Processes ===============C:\WINDOWS\system32\svchost -k DcomLaunchsvchost.exeC:\WINDOWS\System32\svchost.exe -k netsvcssvchost.exesvchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\Explorer.EXEC:\Program Files\hpq\HP Wireless Assistant\HP Wireless Assistant.exeC:\WINDOWS\system32\igfxtray.exeC:\WINDOWS\system32\igfxpers.exeC:\Program Files\Synaptics\SynTP\SynTPEnh.exeC:\Program Files\HP\QuickPlay\QPService.exeC:\Progra... Read more

A:HTTP Tiderv Request & HTTPS Tidserv Request 2

Good evening. Take a trip to this webpage for download links and instructions for running Combofix by sUBs.* Please be aware that this tool may require the PC to be rebooted so close any programs you have open before you start. When CF has finished, it will produce a log - C:\ComboFix.txt - copy and paste it into your next reply. Let me know how the PC is behaving.* There are two points to note from the instructions page:1) The Recovery Console.It is recommended that you install this as, in certain circumstances, it may be the difference between a successful repair and a reformat. If you are uncertain as to whether or not you already have the Recovery Console installed, simply run CF and it will prompt you if it does not detect it.CF will complete some, but not all, of it's removal tasks without the installation of the Console so, should you choose not to allow the installation, you may not get the results you hoped for.2) Disabling your Anti-Virus.CF has been the victim of false-positive detections on occasion and a resident AV may incorrectly identify and delete part of the tool which won't do it much good. If you don't disable your AV, you may not get the results you hoped for either.

Read other 2 answers