Over 1 million tech questions and answers.

my computer wont turn on it sounds like its jus coming out of sleep mode

Q: my computer wont turn on it sounds like its jus coming out of sleep mode

i left my pc on and it was in sleep mode which is set for 1 hr after inactivity my 2 year old little monkey pressed repeatedly the on off button my partner sed he heard alot of bleeps i asume the error beep and so he jus switched it off at the wall not shut down properly as he dosent have any pc knowledge i turned the pc and the fan starts up instantly but its like there no info going from my tower to the screen nothing comes up and the fan is at full speed and it jus stays like that . iv managed before to fix quite a few virus problems even wen my updates went silly and lost my network adapter i fixed but this had completly stumped me please help as i am lost without my pc my family live far away and this is my only contact thankyou everyone who replys n megaa megaa thanks before hand to the one who fixes it lolol

RELEVANCY SCORE 200
Preferred Solution: my computer wont turn on it sounds like its jus coming out of sleep mode

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: my computer wont turn on it sounds like its jus coming out of sleep mode

Maybe try last known configuration.

Remove all floppy disks, CDs, and DVDs from your computer, and then restart your computer.

Click the Start button , click the arrow next to the Lock button , and then click Restart.

Do one of the following:

If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you will need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.

If your computer has more than one operating system, use the arrow keys to highlight the operating system you want to start, and then press F8.

On the Advanced Boot Options screen, use the arrow keys to highlight Last Known Good Configuration, and then press ENTER.

Read other 1 answers
RELEVANCY SCORE 83.6

My computer will not shut completely off when I shut it down. The light for the wireless internet connect does not go black, it turns orange, saying that it is off but now the orange light does not come off unless I hold the power button down.  Also when my computer goes to sleep, when I press a key to turn it back on, it does not turn on. The screen stays black and the wireless internet connection light is orange. It does not boot back up anymore. 

A:HP wont shut off all the way and sleep mode wont let me turn...

Hi, Try the following. Open Settings and select System.  Select Power and sleep, then click on Additional power settings - in the following window, click on 'Choose what the power button does' in the left hand pane. In the subsequent window, first click on 'Change settings that are currently unavailable' ( near the top of the Window ) and then remove the checkmark from the box against 'Turn on fast start-up (recommended)'.  Click the Save Settings button, then close any open windows and restart the notebook. When windows has reloaded, download the IMEI driver directly from Intel on the following link, unzip the package and run the installer. https://downloadcenter.intel.com/download/26127/Intel-Management-Engine-Consumer-Driver-for-Intel-NU... When the installation has completed, restart the notebook. When the machine has reloaded, re-enable Fast Start-up and reboot the notebook once again - let Windows fully load for a few minutes before checking. Regards, DP-K

Read other 1 answers
RELEVANCY SCORE 79.2

my lonove idea pad 100-15IBY JUST WONT TURN ON, there are 2 lights flashing on the laptop indicating that it is in sleep mode, when i plug the charger the charge light indcates that it is charging. if i press the power button the light goes into a solid state for a few seconds and then it just goes back to flasing again. i have have removed the internal battery hoping it will reboot nothing, i have tried to use the one key recovery button located on the side, but nothing. i have removed rams, CMOS BATTERY BUT NOTHING.  the laptop is out of warranty and i rally need it to work, i am a student and dont have much money to fix it, i use this laptop on a daily basis and my work is now stuck on it pls help...

Read other answers
RELEVANCY SCORE 78.4

Hi, I'm having issues with my computer not reconnecting to the Internet after coming out of sleep mode.

The original issue was with randomly getting disconnected from the network. I have slightly fixed that issue, but instead made it so when I use the computer it will work fine, but when I go into sleep mode and later open back up my computer, it will not reconnect to the network.

Things I have tried:

Disabled IPv6 connectivity
Disabled the IP helper Service
Disabled Power Management on my Network Adapter
Flushed my DNS
Went to Dell Livechat
Deleted my Network profile and connected again.
Installed updated Drivers for my Network Card

None of these methods have worked. I don't know what else I can do, I've been having this problem since September, and it's really annoying me.

If you need any more information about my problem please tell me, so I can hopefully fix this issue. Thanks in advance!

A:Computer won't reconnect to network after coming out of Sleep mode

take a look at the attached screenshots--and TRY making your settings the same

Read other 3 answers
RELEVANCY SCORE 77.6

Hey everyone. I have a computer that is crashing after I use sleep mode. I ran an sfc /scannow which came back with corrupt files it was unable to fix and I have also uploaded logs from the most recent blue screen.

I have a Dell laptop and I have already ran Dell diagnostics(found no issues), performed driver update via Dell's utility, and updated the BIOS.

I'm not sure how to look at and interpret the BSOD logs so I am hoping someone can help?

A:Computer BSOD after coming out of sleep mode, error 0x000000F4

Hello Auric,
I take it this a company computer that was Sysypreped on 3-15 Aug.,and that it it is linked to the co's domain.
Its certainly has ongoing problems
The MicroStrategy Intelligence Server service terminated with service-specific error %%-1.
Device action request for device 'USB\VID_0930&PID_6545\C86000BDB9EAEEB19A2FEAAF' was vetoed by 'STORAGE\Volume\_??_USBSTOR#Disk&Ven_Kingston&Prod_DataTraveler_2.0&Rev_PMAP#C86000BDB9EAEEB19A2FEAA F&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}' with veto type 6.
It is also showing multiple problem for the above and a Sandisk.
i can also see in the sfc log one of your hard drives has gone RAW, read-only

This is not my area but someone will chip in.
Background info would be handy

Roy

Read other 3 answers
RELEVANCY SCORE 76.8

Asis laptop.
I usually turn it off altogether if going out for a long period. I did have hibernate, but that seems to have disappeared from the shutdown option. It could have been me to removed it. I can;t remember.
I know I preferred sleep to hibernate, as it was easier to get the computer to come back on in sleep mode.
I just googled about this.  I have an external keyboard and mouse. So I don't really use the keys or
touchpad, whatever on the actual laptop. So i hit the external keyboard, and mouse. I'm not sure which one works best for getting the power running again. The power runs, and I can see in the taskbar, the names of the programs running. It would probably be Pale moon browser, xmbc, total commander, and kmplayer. The problem is that I can only see black screens in the window for the programs. So I start hitting the start button on the laptop, the external mouse, the external keyboard. Eventually the black screen will go will go away, and things will return to normal.
 
update.I just put the computer in sleep for a few minutes. This time instead of using the external keboardm i hit enter on the laptop keyboard.keypad, whatever it's called. Things came on a lot quicker. But as it was a short period of time, I'll try it tomorrow again, and see what happens.

Read other answers
RELEVANCY SCORE 76.8

Hello!
When my computer comes back from sleep mode, it intermitently makes a whooshing sound. Is this the drive spinning up? It only happens after coming back from sleep mode. If the computer never goes into sleep mode, the problem doesn't occur. Is this something serious or should I just live with it?
Thanks
Michael Doherty

A:Computer makes whoosing sound after coming back from sleep mode

It will probably be both the drives and the cooling fans combined, in which case that's normal unless it's only recently started making that noise even though you've been using sleep mode previously and the noise did not occur on wake-up.

Provided everything is working okay and you are getting no BSODs or other crashes, all will be normal.

Read other 7 answers
RELEVANCY SCORE 75.2

I have a problem with my desktop computer. I turn the desktop on and my monitor button turns orange instead of green and says in sleep mode press any key. I hit any key and nothing happens. I've made sure the cords for the monitor are pulled into the desktop but still have same problem. Now I unplugged the monitor cord from the desktop and it has another message that pops on the screen I forget what it said it was green and red. But when I plug the monitor back into the computer it goes back to blank screen. Does anyone know whats wrong? If so can I fix it? Thanks in advance for any help.

A:Turn on computer but monitor says sleep mode

Is this in the wrong area?

Read other 2 answers
RELEVANCY SCORE 74.4

Hi i have been experiencing this problem since i first built my PC. It seems to wake up from sleep at random times in the nite(very disturbing). I have already turned off all the devices that wake it up that are not USb interface and I have no idea how to proceed to trouble shoot this issue, please help if you can.
Thank you,
J
EDIT: It goes back to sleep on its own(sometimes)

A:Computer will offten turn back on when in sleep mode

have you turned off the waking from lan of your network card? also, there are some power management settings in bios which deal with auto waking up from sleep. see if this is the case, as windows settings might be over-ridden by bios.

Read other 4 answers
RELEVANCY SCORE 73.2

every so often I'll leave my computer on for several hours and come back to it and notice that the screen has turned off but it hasnt gone into sleep mode. this doesnt always happen there are time when my computer will sleep when its suppose to but I just cant figure out why it doesnt always do it. I have my screen saver to come on after 10 minutes the screen to shut off after 30 and its set to go into sleep mode in an hour but like last night when I went to sleep with my computer on and woke up hours later only the screen was off. does anyone know the cause of this?

A:Computer wont always go into sleep mode

Originally Posted by penfan


every so often I'll leave my computer on for several hours and come back to it and notice that the screen has turned off but it hasnt gone into sleep mode. this doesnt always happen there are time when my computer will sleep when its suppose to but I just cant figure out why it doesnt always do it. I have my screen saver to come on after 10 minutes the screen to shut off after 30 and its set to go into sleep mode in an hour but like last night when I went to sleep with my computer on and woke up hours later only the screen was off. does anyone know the cause of this?



Penfan

We could help you a lot more if you would fill in your system spec (lower left corner) so that we know what kind of hardware you have. also 32 or 64bit?

thanks
\
Ken

Read other 4 answers
RELEVANCY SCORE 73.2

When I hit the sleep button on my computer it will power down like it is going to sleep mode but then immediately powers back up.

Whats up?
 

A:computer wont go to sleep mode

Read other 14 answers
RELEVANCY SCORE 73.2

Hello, I hope someone can help me or point me in the correct direction.

Two days ago I turned on my desktop computer, walked away from it while it should have been booting up and when I returned the blue light on the computer was blinking as if it was in sleep mode.

The strange thing is, is that the message on my monitor reads that the monitor is not receiving a signal.

The desktop is about 1.5 years old. I did install a video card about a year ago. When I installed the video card the computer would shut down when I played a game that was graphically intensive so I installed another fan and upgraded the power supply and the problem was fixed.

It has been running fine for approximately 11 months.

If you have any ideas please let me know.

Thank you in advance.
 

Read other answers
RELEVANCY SCORE 72.4

A day or so ago, my computer started to wig out, it was typing all ```````` non stop, I ran a virus check with Malwarebytes and the ````` changed to 11111111. It would stop after I rebooted, but after about a half hour, it would do it again. I've ran a Norton check, malwarebytes and spybot search and destroy and so far it hasn't wigged out anymore, but now when I put the computer is sleep mode, it just pops right back on within a few seconds.I've included my hijackthis log.Thanks for any and all help.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 9:05:32 PM, on 10/11/2010Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v8.00 (8.00.6001.18702)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\system32\Ati2evxx.exeC:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exeC:\Program Files\Bonjour\mDNSResponder.exeC:\Program Files\Norton Security Suite\Engine\4.2.0.12\ccSvcHst.exeC: ... Read more

A:Computer wont stay in sleep mode

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the ... Read more

Read other 2 answers
RELEVANCY SCORE 72.4

Hello, i have recently made a computer and installed vista, everything's great except my computer wont go into sleep mode: i click on it, monitor goes to standby for a few seconds, the lights dim in my computer for a second, then desktop comes up and all the things that are in my usb are temporarily disconnected then connects. any solutions or help would be appreciated.

A:Custom computer wont go to sleep mode?

Hello BillyMarShere, and welcome to Vista Forums.

You might check through each item in this tutorial below to see if it may help you find what is waking up your computer. Usually, the culprit is the "Allow this device to wake up computer" option checked in the Network adapter Power Management settings in Device Manager.

Power Options and Sleep Mode Problems

Hope this helps,
Shawn

Read other 3 answers
RELEVANCY SCORE 72.4

Hi Guy's wonder if anyone can help me, i don't know if i have a virus all scans that i have run say not, as best as i can remember the last thing i downloaded before i noticed this problem was from tversity so i could stream movies to my xbox but didn't like it so uninstalled it, and it seems ever since my Laptop won't enter sleep mode, when i click on sleep the screens turn off and the drive light just keeps on flickering. and now i have tried to restore it back to a later date but now that don't work and says its incomplete unexpected error any help will be appreciated.

A:computer wont go into sleep mode nor restore

I have resolved this issue now it appears my advanced settings changed when i streamed movie to xbox.

Read other 1 answers
RELEVANCY SCORE 72

When i leave my computer on and it switches to standby mode after i left it for a while it wont turn back on the fans are off and wont switch on and the power led just blinks and the only way i can get it to resume is to switch off the power supply and turn it back on

help would be appreciated, thanks

A:after standby mode my computer wont turn on

Have you pressed the power switch in the Front of the Case? Then go into Control Panel/Power Options/Choose what the Power Buttons do on the left side.

Read other 5 answers
RELEVANCY SCORE 71.2

While playing games... my pc will always enter sleep mode after about 10 min. of play time. Once in sleep mode, it will not wake up.. so I have to turn off the computer by the button. This is really frustrating. I tried the live chat with microsoft and the tech found corrupted files?! But they wanted to charge me 69.99 to resolve the issue. Help?
 

A:Computer Enters Sleep Mode While Gaming and Wont Wake Up

guessing 7 or vista

http://www.avinashtech.com/microsoft/disable-auto-sleep-mode-windows/

and start type cmd right click it run as admin in the box enter sfc/ scannow enter run it twice

70 to fix it? really???

http://majorgeeks.com/download4181.html

http://www.almico.com/speedfan.php
use above to keep eye on your temperatures , i cleaned out a computer yesterday and the fluff was enough to make a jumper
 

Read other 1 answers
RELEVANCY SCORE 68.8

i formatted my hard drive and reinstalled a clean vista program. installed the drivers from acer and my power button doesnt take computer out of sleep mode neither does the keyboard or mouse.. any ideas... driver missing? cant think of what it is.
 

A:coming out of sleep mode

Did you take a look at your Power Options and see what they are set up as?
 

Read other 3 answers
RELEVANCY SCORE 68.8

Compaq Presario F730US (Laptop)
AMD Athlon 64 X2
Dual Core Processor
1.93 GB of RAM
Windows XP Pro SP3

Recently, whenever I open my laptop out of sleep mode (as in I closed it to put it in sleep mode), the screen stays black and nothing happens. When I hold down the power button the turn the computer off, it shuts down but, after a couple seconds it tries to start up again, stays at a black screen for about 10 seconds, the computer restarts itself, and it repeats. The only way I can get my computer to function at this point is to use the power button the shut it off, wait for about 20 seconds, then start it up myself.

It should be noted that about a week ago I upgraded my RAM to 1 gb to 2 gb, but this problem only started yesterday.

Thanks for the help!

A:Not coming out of sleep mode

i doubt the ram would cause that problem, but to eliminate it for sure, try putting the old ram back in and running it like that for another week or 2. If it goes away it would appear to be ram. if not, a review of your power management applet would be in order.

Read other 15 answers
RELEVANCY SCORE 68
A:BSOD 2nd Day in a row. 1st coming from sleep mode, 2nd while alt tab.

Hi ShayTheRogue.

Update the wireless driver from Driver Downloads | Qualcomm Atheros, Inc.

Also Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
__________________________________

Code:
ffffd000`247d78b8 fffff801`8b3a28ecUnable to load image \SystemRoot\system32\DRIVERS\athwnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for athwnx.sys
*** ERROR: Module load completed but symbols could not be loaded for athwnx.sys
athwnx+0x1258ec

Code:
BugCheck 24, {b500190637, ffffd000247d8318, ffffd000247d7b20, fffff8006a35bb9a}

Probably caused by : ntkrnlmp.exe ( nt!RtlSubtreePredecessor+12 )

Followup: MachineOwner
---------

Code:
BugCheck 4E, {2, e46a, 22fdff, 200}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+21f60 )

Followup: MachineOwner
---------

Read other 3 answers
RELEVANCY SCORE 68

My OS is Windows XP and I am using USB MS wireless comfort key board and Wireless mouse. I have assigned a key for sleep mode. By using it I can put the computer to sleep / standby mode. BUT I am having problem in waking it up, it is possible only by touching softly the power button. When I do that the computer reboots instead of coming out of sleep mode. When rebooting I only see the black screen for long time.

Is there anyway to come out of sleep mode without rebooting? Mouse doesn't respond to wake up ONLY power button can be used and then it reboots not wakeup immediately.
 

Read other answers
RELEVANCY SCORE 68

Installed Win8 in early October. No problems until now. Now, when I come out of sleep mode, I see the lock screen, and split seconds later it crashes and reboots. So I installed the SDK and symbols and ran "dumpchk.exe -y c:\Symbols !analyze -v c:\temp\Memory.dmp" . I hope one of the geniuses on this board will be able to tell me which driver is not making nice with tcpip.sys

Thanks in advance for any help you can provide.

Atomax
Symbol search path is: c:\Symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9200.16384.amd64fre.win8_rtm.120725-1247
Machine Name:
Kernel base = 0xfffff801`ad88b000 PsLoadedModuleList = 0xfffff801`adb55a60
Debug session time: Tue Nov 20 08:08:18.129 2012 (UTC + 2:00)
System Uptime: 0 days 1:15:52.962
Loading Kernel Symbols
...............................................................
................................................................
...........................................................
Loading User Symbols
Loading unloaded module list
..............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
********************************************************... Read more

A:BSoD coming out of sleep mode

Uninstall third party firewalls, vpn solutions, other virtual networking drivers, VMware, hypervisors, antivirus solutions, apple bonjour. Upgrade or use stock networking drivers.

I think I see VMware in there.

Read other 18 answers
RELEVANCY SCORE 68

I purchased a new Vista computer back in April from Dell and it's worked fine up until a couple days ago.

The last few times I've tried to use my computer after bringing it out of Sleep mode it freezes up and nothing responds. After trying to use ctrl+alt+delete and few other things I get this error:

"Logon process has failed to create the security options dialog"

The only way I can get things working again is to do a hard reboot. It then runs fine until I put it back into sleep mode and try using it once it's brought out of sleep mode again.

I googled the error and found lots of info on people having this error, but no concrete solutions.

The only thing I can recall that changed or was installed lately was a Microsoft update. No hardware, power or software changes were made.

Does anyone have any ideas on how to fix this or has anyone else encounted this problem?

Thank you.
 

A:Freeze up after coming out of sleep mode

Read other 8 answers
RELEVANCY SCORE 68

Hi again,

I had various issues getting blue screened a couple of weeks ago and after receiving some help on here everything was fine. I've just come back from lunch to find that my computer blue screened when waking up from hibernation (not sure if that's even right, basically screen went black because I hadn't interacted for a while.)

Here's the minidump file: Zippyshare.com - 041015-3437-01.dmp

Not sure what could be causing this, nothing's changed on the computer driver-wise and it's had no problems doing the same thing in the past.

A:BSOD when coming out of sleep mode just now

Hi glacierd & Welcome to the forums ^_^,

I am extremely sorry for the delayed response . There are very few BSOD analysts. Do you still need help with your problem? If yes, then kindly reply back to this topic and I would reply within 48 hours. Also, I would be notified via email once you post.
-Pranav

Read other 3 answers
RELEVANCY SCORE 68

Hi there,
I have a Dell Inspiron 1525 laptop and basically it sometimes has a problem coming out of Sleep Mode. I really can't figure out what causes the problem as it only happens on average, 10% of the time. Basically it always goes into Sleep Mode ok, but about 10% of the time when I lift the lid, it will appear to be coming out of Sleep Mode, but just doesn't get there, hard drive don't appear to spin up, screen remains off etc. The only way to sort it is a hard restart.

I've had the laptop for about 9 months and as far as I can be sure, its always had this problem, but can't be sure as I said.

Any ideas please?

Thanks


Ninko

A:Problem coming out of Sleep Mode sometimes

Power Options and Sleep Mode Problems

Read other 2 answers
RELEVANCY SCORE 68

When coming out of sleep mode the log in screen starts to come on and I get a loud buzzing from the hard drive then I get the blue screen this has happened 3 times this week. I do not have anything new.
win 7 64bit updated intel 2.66ghz

Read other answers
RELEVANCY SCORE 68

I had thought I might have a virus, but I posted to that forum with all the logs and reports, and got no replies, so I'm HOPING that means I don't have a virus!!

Occasionally when I close my laptop, it won't come all the way out of sleep mode when I open it back up! The power light is on, the blue light is on, indicating that it SHOULD be awake, but the screen is dark and the keyboard does nothing for me! I've tried manually pushing the sleep button, which will go back and forth from blue to yellow, but the screen does not come back on. I was prompted to send a report to Windows the first time, and the report called the shut down a blue screen shut down....don't know if it really was, or if that's what they call it when you shut down by just holding down the power key until it turns off Which, BTW, is the ONLY way I've been able to "unstick" it...cut the power and then reboot. There have also been a few times in the past month or so that I have closed the notebook, and when I went back to it there was a message that it had shut down unexpectedly and rebooted, but it doesn't say why.

I searched this forum, and found a reply that suggested that the poster update their drivers and/or firmware...so I went to the HP Update feature and tried that, but it says there are no updates

If there is no way to FIX this problem, does anyone at least know another way to shut down so that the programs have a chance to close properly????

TH... Read more

A:Notebook not coming out of sleep mode

You might need to update your BIOS.

Also check Power Management Settings in the BIOS.
 

Read other 2 answers
RELEVANCY SCORE 68

Hi All

Please find attached the dump report and perfmon report.

I have experienced BSoD the past 4 days (3 times) all times it happened while coming out of sleep mode, but it does not happen all times the PC goes to sleep.

It's a new laptop, Windows 7 pro 32-bit, I had it since Jan 17 and crashes only started a few days ago. For now suspecting it has something to do with the sleep mode I have changed my power settings to avoid this state while plugged into AC.

I just want to discard any H/W issue since is a new computer and also discard S/W issues since I've been playing around installing basic S/W (Reflection X, winzip, mozilla, plugins, connectivity, media players, etc), nothing dramatic.

Hope this helps and I'll wait for your feedback, thanks!!

Dan

A:BSoD - while coming out of sleep mode?

The dmp(s) point to ntkrnlmp.exe as the probable cause. We know this is not the case, as these are core OS files, and will definitely not cause a BSOD. They are just the default files the debuggers blame when they can't see a better cause. You need to enable driver verifier to help pinpoint the faulty driver...

- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part). Upload the new .dmp files as they occur.

Try removing any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller w... Read more

Read other 4 answers
RELEVANCY SCORE 68

Dell Inspiron laptop. i5 series, 2.53 GHz, 6GB memory, windows 7 64-bit.

I am constantly having an issue that is getting progressively worse. As my computer is coming out of sleep mode, instead of taking me to my log in screen (security), the screen just starts scrolling through various solid colors... black... red... blue... green... etc. I have to hit the power button, to put it back in sleep mode, watch while it struggles with this, then when the power button is flashing, I hit it again, to bring it back. Then, and only then, will it go to my log in where I enter my password.

I actually called Dell, but that was such a big headache and a waste of time. I have a 16 month old and I can't sit on the phone while they read through their books like I'm an idiot.

I'm wondering if it is my video card but I'm not sure how to test it.

HELP?

[email protected]
 

A:Issue Coming out of Sleep Mode

Hello JLOinNC,
My name is Krishna and I work for the Social Media and Community Team at Dell. Allow me to sincerely apologize for any difficulties you may have encountered in attempting to resolve your concerns. Based on the above symptoms, It is more likely that you have a bad video card or corrupted video drivers.
Try downloading and installing the latest video drivers and see if it helps. Depending on your system model, you can find it on www.support.dell.com. Also, run the hardware diagnostics and check for errors. You can follow the instructions from http://dell.to/dU0fpw

Regards,
Dell-Kris K
 

Read other 3 answers
RELEVANCY SCORE 68

Hi there, have recently been suffering with BSOD errors when coming out of sleep mode, I think.






Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF8000335D41F
BCP3: FFFFF880203647A0
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


Have also attached my minidump file.


Any help would be much appreciated! Am usually alright with computers, although anything BSOD puts me into a state of shock!

EDIT - Apologies, after posting I noticed the banner about correct form for these threads. Have updated my attached file to be the one creating using the diagnostics tool.

A:BSOD When coming out of sleep mode.

All your bugchecks are the same (System service exceptions). These are generally caused by graphics drivers containing bugs or a faulty GPU.

I recommend running Driver Verifier to see if it picks anything up.
Follow these instructions.

Driver Verifier - Enable and Disable

I would recommend creating a restore point before enabling driver verifier, follow these instructions.

System Restore Point - Create


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff8000335d41f, fffff880203647a0, 0}

Probably caused by : ntkrnlmp.exe ( nt!RtlCompareUnicodeString+b )

Followup: MachineOwner

Read other 3 answers
RELEVANCY SCORE 68

Hi, My Windows 7 Pro home built computer with an ASUS B150 motherboard and Intel Core i3 processor has been experiencing an intermittent problem recently when coming out of SLEEP mode. About one time out of 15, I get the BSOD and a message that states: DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATION. Then there is a lot of text and then a message at the bottom that says that a log file is being created. The text doesn't stay on the screen long enough to read very much of it before it disappears. Sometimes it just does a Restart operation,and sometimes I get the Safe Mode screen. The BSOD screen does not say where this log file is being created or what its name is. I'm not all that savvy with the OS, so if someone can tell me where I might find the file, I will locate it and post it here for anyone who may be able to help. Thanks in advance.

A:BSOD when coming out of SLEEP mode

How to receive help diagnosing Blue Screens and Windows crashes - http://www.bleepingcomputer.com/forums/topic176011.html
 
Louis

Read other 0 answers
RELEVANCY SCORE 68

I am using an IBM Thinkpad T40 with WinXP. My HP D145 Officejet All in one printer broke down so I had it replaced with an HP Photosmart 3100.

Problem is I get BSODs after finishing a print job and going to or returning from sleep, standby or hibernate modes. I never got BSODs when going to the mode after a scan, copy or fax job. I never encountered the same problem also with my old D145.

The MS Online Crash Analysis report says that the problem was caused by an unknown device driver.

I already tried to uninstall and reinstall the HP software. I also uninstalled my old printer drivers. I also followed HP's recommendation to close the HP software before going to sleep mode. There seems to be no updated driver from the HP website yet.

I have attached the minidumps I collected from the machine
 

A:BSOD when going and coming from sleep mode

Hello and welcome to Techspot.

All your minidumps crash at ino_fltr.sys. They all have a bugcheck of 9F.

0x0000009F: DRIVER_POWER_STATE_FAILURE

A driver is in an inconsistent or invalid power state. Typically occurs during events that involve power state transitions, such as shutting down, or moving into or out of standby or hibernate mode.

See HERE for further info about your stop message.

See HERE for more info.

Also, see HERE for a ino_fltr.sys driver update.

I haven`t come across this problem before, so I don`t know if the above will help.

Regards Howard :wave: :wave:
 

Read other 4 answers
RELEVANCY SCORE 68

I seem to be getting BSOD every time I come out of sleep mode with my new laptop (Asus G74SX-TH71). I put in an SSD did a clean install of Windows 7 Professional x64. I have disabled the bluetooth in device manager deliberately as I don't plan on using it.

A:BSOD after coming out of sleep mode

Kaspersky was implicated in your crashe{s}& is a frequent cause of BSOD's.

I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST.

http://support.kaspersky.com/downloa...vremover10.zip

Microsoft Security Essentials - Free Antivirus for Windows

Read other 4 answers
RELEVANCY SCORE 67.2

...even though I've set it to "no password" in all of the power plans. I also changed it on the main power settings screen, where it has "require password.." on the left. I click on that and select "no password" there as well.

Screen saver is set to "none"

I'm about to remove the password from my login account altogether, just to get rid of this annoyance.

Is there something else that could be causing this behavior? Because I am at wit's end with this issue. The only band-aid I have is to run the Caffeine utility to prevent the system from sleeping.

A:Asks for Password when coming out of sleep mode

Did you install SP1 for 7? This could be unrelated but I know that SP1 has caused issues with Win7 and sleep state behavior. Perhaps you've been hit by this bug?

Read other 5 answers
RELEVANCY SCORE 67.2

ok...something that i've found a little odd...when Win7 comes out of sleep mode after i've awakened it with my mouse, my monitor doesn't turn on unless i switch to another channel and back again on my KVM...

thoughts?

linksys proconnect 4 channel KVM switch
Windows 7 Pro full release with all the updates...windows experience=4.4
Dell Precision 380 - Pentium 4 - 3.40GHz / 3.39GHz, 2GB memory
Nvidia Quadro FX1400

A:Coming out of sleep mode-have to switch KVM chan

Does your display model number show up in the device manager, or is it a generic device? If it's generic, try to find and install drivers for your monitor. See if that makes a difference.

Read other 9 answers
RELEVANCY SCORE 67.2

I don't know what I did to changes things but I recently started to get BSD's when coming out of sleep mode.
I'm using W7 x64 Ultimate retail. Complete specs are:
Custom Built ASUS M4A79T Deluxe - AMD X4-955-Corsair XMS3 8GB DDR3 Memory-XFX HD-487A-ZHFC Radeon HD 4870 1GB Vid card - Sony & Pioneer DVD Drives-HAF922 Case-1 WD 1TB, 1 Seagate 1TB and 1 Rack Drive-HVR 2250 & HDHomerun Tuners- Creative Soundblaster X-Fi Titanium- Acer H233H monitor-1 ATI DCT-W7 X64 Ultimate

Please let me know if you need more info.
Thanks in advance

A:Blue screen coming out of sleep mode

Try disabling hybrid sleep from dvanced power options:
Attachment 110717

Read other 8 answers
RELEVANCY SCORE 67.2

If i allow or manually put the computer into sleep mode and try to wake up it crashes. I start windows normally and use who crashed to analyze. This is what I get. Its only when going into sleep mode, never anything else.

I built the PC myself and everything is install correctly and brand new. It isnt the first PC ive built either. Ive checked all the drivers, at least I think I have......any ideas?

On Sat 12/31/2011 6:07:52 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\123111-8829-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x50 (0xFFFFF6F450014770, 0x0, 0xFFFFF80002CF0F61, 0x5)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


On Sat 12/31/2011 6:07:52 PM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x50 (0xFFFFF6F450014770, 0x0, 0xFFFFF80002CF0F61, 0x5)
Error: PAGE_FAULT_IN_NONPAGED_AREA
Bug check description: Thi... Read more

A:Windows 7 Only Crashes Coming Out of Sleep Mode

These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in &q... Read more

Read other 1 answers
RELEVANCY SCORE 67.2

? OS - Windows 10
? x64 ?
? original installed OS: Win7
? original OS is full retail version (YOU purchased it from retailer)?
? Approximate age of system is 7 years (Some upgrades since)
? Approximate age of OS installation: 2 years for Win7, upgrade to Win10 about 6 months ago
? Have you re-installed the OS? Yes

? CPU: Intel Core 2 Quad Q6600 Kentsfield Quad-Core 2.4 GHz LGA 775 BX80562Q6600 Processor
? Video Card: Geforce 9800 GTX
? MotherBoard: ASUS P5Q Pro
? Power Supply - OCZ StealthXStream OCZ700SXS 700W

? System Manufacturer: Custom Build
? Exact model number: N/A

Desktop
=====================================

OK, my computer blue screens when it comes out of SLEEP mode. It is not every time, probably 1 out of every 7 or 8 times. But it is always coming out of sleep mode (not hibernate mode). The bluescreen references file: NVLDDMKM.SYS which is a driver file for my video card. I have updated the driver to Version: 341.95 WHQL, Release Date: 2016.3.16, Operating System: Windows 10 64-bit and I still have the problem. The upgrade to Win10 did nothing to solve the problem.
I have been dealing with this issue for well over a year and it is getting annoying. I have run the sysnativeBSODCollector app and attached the .zip file. When I run the perfmon /report it says it will take 60 seconds, but nothing happens. I let it run for an hour and nothing happened. The File/Save As is grayed out even after an hour.

Read other answers
RELEVANCY SCORE 67.2

When computer was placed i when computer was placed in sleep mode I returned to wake the computer it would not respond to keyboard and mouse the computer monitor only shows the time and date in the lef the time and date in the left-hand corner but it will not respond or move past that screen. I have tried restarting the computer I've tried changing the battery I have tried restarting the computer I've tried changing the batteries connecting to keyboard switching out the keyboard and the mouse but still the computer is not responding.

A:pc not coming out of sleep mode or responding to ketboard an...

Hi there @petersonlandm, Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that you are having issues with waking from sleep and hibernate and the keyboard and mouse not responding when you do. I am happy to help with this. Please check out this page: HP PCs - Sleep and Hibernate Issues (Windows 10, 8). You will want to check all of it, but be sure you have see your computer to wake from either the keyboard and mouse, and in the power settings the USB ports and wireless or Bluetooth are getting power when sleep/hibernate goes on.   Please let me know how that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

Read other 1 answers
RELEVANCY SCORE 67.2

So, sometimes when my Win 8.1 machine comes out of sleep mode, it seems to lose focus. What I mean by that is some items in the notification area disappear and that item no longer works.

Example: Windows just came out of sleep mode and now my Outlook icon has disappeared in the notification area and Outlook is no longer functioning. Same happens with other items in the notification area like Catalyst Control Panel, SoundBlaster soundcard control panel, and a few other items. They just disappear from the notification area and cease to function. The only way to get them back and functioning again is to restart the PC.

This only happens when the PC comes out of sleep mode, though it is random.

Any ideas?

BTW you can view my system specs for questions concerning it.

Thanks.

Read other answers
RELEVANCY SCORE 67.2

Please help me!

Here is what happened:
My PC is in sleep mode so I tap Esc a few times, then get to the locked screen and my mouse and keyboard are no longer working so i press and hold power to shut it down.

Next I start it up only to find "Missing Operating System" so I basically start freaking out shut down and restart, then reset, hit the kill switch, etc only to find the same message greeting me again.

I try to calm down, get some sleep and started working on it this morning.

I have Vista Ultimate x64 so i search around on google and find that there is a recovery disc downloadable iso... yadda yadda yadda, i eventually get to the repair screen but I don't have any operating system showing. So I read in the forums here for a bit and basically can't find anything so I just click Next without having an operating system showing.

Then I click Startup Repair simply because I thought it sounded like the best option for me at the momment, considering I can't startup my computer so I think it should be repaired.

So now for the last hour I have been staring at the Startup Repair say "Startup Repair is checking your system for problems..." and a status bar reads "Attempting repairs..." with an animated blue line scrolling across. I think I'm going to go insane if I have to keep looking at this. PLEASE help me, should i restart? How do I get my old operating system recognized in the first recovery screen? How do I get my PC back onlin... Read more

A:HELP! - My PC froze after coming out of sleep mode, now it's a big mess!

wait and see what happens leave it over night if you can (i know its a long time but you need to be sure ) , if yuo get no joy post up the make and model of your laptop , it most likely has a repair partition ( a seperate partition on yuor hard drive with your operating system and system files) with your specs we can tell you how to go about reformatting (you will loose all you data though depending on the types of reinstall offered you could save you documents etc it all depends)

Read other 2 answers
RELEVANCY SCORE 67.2

My H50-50 running Windows 10 64 bit will come out of sleep mode and reboot.  The screen goes to a login screen but I am not able to log in.  The screen flashes three times and then reboots.  When done everything runs fine.  Can't figure out what's wrong.

Read other answers
RELEVANCY SCORE 67.2

I am not sure what is causing this issue on my dads laptop. He only uses it for work with email and excel mostly. He surf's the internet but nothing malicious as far as I can see.

I'm trying to talk to him about running the Windows 7 forums diagnostic tool. He doesn't seem to be able to grasp what I am asking him to do. Is it possible if I was able to get him to send me the .dmp files from his harddrive to mine and have them uploaded that way for someone to help me out?

A:BSOD while coming out of sleep mode BCCode 9f

Hello Rosco, if you can post it following the Blue Screen of Death (BSOD) Posting Instructions, we will be able to help you

Read other 1 answers
RELEVANCY SCORE 67.2

When I come out of sleep mode on my computer, USB devices do not work, such as the mouse and keyboard. It just now started doing this so I have not installed SP1. I say why fix something that ain't broken? I have never had any problems before so I may have to install it.

Computer Specs:

Vista Premium (no SP1)
AMD Athlon X2 2.6GHz
2GB RAM
Geforce 8800GT
500GB HD

What can I do or try to get it to work?
Thanks
 

A:USB Devices do not work when coming out of sleep mode

If the mouse and keyboard don't work, how do you get it out of sleep mode?
 

Read other 3 answers
RELEVANCY SCORE 67.2

when i come out of sleep mode, my mouse hangs up so i have to reboot..help

i run xp
 

A:mouse hangs up when coming out of sleep mode

I had problems with my system freezing after coming out of sleep mode, so I just disabled it. You may have the same kind of problem, something with sleep mode and xp.

to disable this:

click start,control panel
click on the power options
set system stand by to never
set system hybernate to never
 

Read other 1 answers
RELEVANCY SCORE 66.4

I have a toshiba p305d s8900 laptop and here recently my networking programs are unresponsive when my computer comes out of sleep mode. any idea how to fix this?
as of now i have to restart the computer to regain internet usage.

Read other answers