Over 1 million tech questions and answers.

Driver power state faillure

Q: Driver power state faillure

My laptop is only about 4 month old (HP Notebook, serial #5CD4340HSP), but yesterday it quit twice with the message about a driver power state failure and had to restart. It is my second computer that I use only about once a week, so it's not like I have overused it already and don't even have many programs on it.

I'm not sure what to do about this problem. I did follow the instructions and have run the SF debug tool. File is attached.

RELEVANCY SCORE 200
Preferred Solution: Driver power state faillure

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Driver power state faillure

Hi Kaityf & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
0: kd> !irp ffffe001574ebc60
Irp is active with 9 stacks 7 is current (= 0xffffe001574ebee0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe001574a0c60 00000000 fffff8004817a1f4-ffffe00156c78b60 Success Error Cancel pending
\Driver\cdrom cdrom!RequestProcessPowerIrpCompletion
Args: 00000000 00000001 00000004 00000000
[ 16, 2] 0 e1 ffffe001574a0c60 00000000 fffff800f6725c30-ffffe001589a5f08 Success Error Cancel pending
\Driver\cdrom nt!PopRequestCompletion
Args: 00000000 00000001 00000004 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe001589a5f08
Args: 00000000 00000000 00000000 00000000


So, the driver causing the IRP blockage is the CDROM.sys which is the SCSI CD ROM Driver. But, since this is a part of Windows Operating System, chance of it being at fault is extremely less. Let's take a look at the 3rd party drivers present on your system -

Code:
**************************Tue Jan 6 05:53:17.011 2015 (UTC + 5:30)**************************
ElbyCDFL.sys Fri Dec 15 02:52:27 2006 (4581C093)
ElbyCDIO.sys Tue Feb 17 22:41:23 2009 (499AEFBB)
WirelessButtonDriver64.sys Thu Aug 30 08:41:29 2012 (503ED9E1)
SynTP.sys Sat Jul 27 00:16:37 2013 (51F2C40D)
Rt630x64.sys Thu Aug 15 11:53:59 2013 (520C73FF)
intelppm.sys Thu Aug 22 14:16:35 2013 (5215CFEB)
dump_storahci.sys Thu Aug 22 17:10:39 2013 (5215F8B7)
rtwlane.sys Thu Sep 12 00:28:03 2013 (5230BD3B)
MBI.sys Tue Oct 8 12:51:23 2013 (5253B273)
RTKVHD64.sys Tue Nov 5 17:09:41 2013 (5278D8FD)
CLVirtualDrive.sys Tue Nov 12 09:01:36 2013 (5281A118)
IntcDAud.sys Wed Nov 27 19:55:44 2013 (529600E8)
iwdbus.sys Wed Dec 18 04:17:38 2013 (52B0D48A)
TXEIx64.sys Sun Jan 12 18:38:31 2014 (52D293CF)
igdkmd64.sys Fri Jan 17 00:30:35 2014 (52D82C53)
clwvd.sys Tue Jan 28 09:28:36 2014 (52E72AEC)
mfehidk.sys Fri Jun 13 21:58:09 2014 (539B2699)
mfewfpk.sys Fri Jun 13 21:58:21 2014 (539B26A5)
mfeapfk.sys Fri Jun 13 21:58:47 2014 (539B26BF)
mfeavfk.sys Fri Jun 13 21:59:02 2014 (539B26CE)
mfefirek.sys Fri Jun 13 22:00:21 2014 (539B271D)
cfwids.sys Fri Jun 13 22:00:46 2014 (539B2736)
RtsP2Stor.sys Fri Jul 4 14:24:24 2014 (53B66BC0)
mfencbdc.sys Wed Aug 20 20:31:10 2014 (53F4B836)
aswMonFlt.sys Thu Nov 6 18:23:07 2014 (545B6F33)
aswRvrt.sys Thu Nov 6 18:23:22 2014 (545B6F42)
aswVmm.sys Thu Nov 6 18:23:31 2014 (545B6F4B)
aswRdr2.sys Thu Nov 6 18:24:02 2014 (545B6F6A)
aswHwid.sys Thu Nov 6 18:25:01 2014 (545B6FA5)
aswSP.sys Thu Nov 6 18:39:55 2014 (545B7323)
aswStm.sys Thu Nov 6 18:41:00 2014 (545B7364)
aswSnx.sys Fri Nov 21 16:47:12 2014 (546F1F38)
??????????????????????????????????????????????????????????????????????????????????????``
**************************Thu Dec 25 14:36:22.490 2014 (UTC + 5:30)**************************
aswMonFlt.sys Thu Jun 26 17:02:51 2014 (53AC04E3)
aswRdr2.sys Thu Jun 26 17:03:28 2014 (53AC0508)
aswRvrt.sys Thu Jun 26 17:05:39 2014 (53AC058B)
aswVmm.sys Thu Jun 26 17:05:49 2014 (53AC0595)
aswStm.sys Thu Jun 26 17:17:09 2014 (53AC083D)
aswSP.sys Wed Jul 2 23:08:12 2014 (53B44384)
aswSnx.sys Fri Nov 21 19:45:50 2014 (546F4916)


http://www.carrona.org/drivers/driver.php?id=ElbyCDFL.sys
http://www.carrona.org/drivers/driver.php?id=ElbyCDIO.sys
http://www.carrona.org/drivers/driver.php?id=WirelessButtonDriver64.sys
http://www.carrona.org/drivers/driver.php?id=SynTP.sys
http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys
http://www.carrona.org/drivers/driver.php?id=intelppm.sys
http://www.carrona.org/drivers/driver.php?id=dump_storahci.sys
http://www.carrona.org/drivers/driver.php?id=rtwlane.sys
MBI.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
http://www.carrona.org/drivers/driver.php?id=CLVirtualDrive.sys
http://www.carrona.org/drivers/driver.php?id=IntcDAud.sys
http://www.carrona.org/drivers/driver.php?id=iwdbus.sys
http://www.carrona.org/drivers/driver.php?id=TXEIx64.sys
http://www.carrona.org/drivers/driver.php?id=igdkmd64.sys
http://www.carrona.org/drivers/driver.php?id=clwvd.sys
http://www.carrona.org/drivers/driver.php?id=mfehidk.sys
http://www.carrona.org/drivers/driver.php?id=mfewfpk.sys
http://www.carrona.org/drivers/driver.php?id=mfeapfk.sys
http://www.carrona.org/drivers/driver.php?id=mfeavfk.sys
http://www.carrona.org/drivers/driver.php?id=mfefirek.sys
http://www.carrona.org/drivers/driver.php?id=cfwids.sys
http://www.carrona.org/drivers/driver.php?id=RtsP2Stor.sys
http://www.carrona.org/drivers/driver.php?id=mfencbdc.sys
http://www.carrona.org/drivers/driver.php?id=aswMonFlt.sys
http://www.carrona.org/drivers/driver.php?id=aswRvrt.sys
http://www.carrona.org/drivers/driver.php?id=aswVmm.sys
http://www.carrona.org/drivers/driver.php?id=aswRdr2.sys
http://www.carrona.org/drivers/driver.php?id=aswHwid.sys
http://www.carrona.org/drivers/driver.php?id=aswSP.sys
http://www.carrona.org/drivers/driver.php?id=aswStm.sys
http://www.carrona.org/drivers/driver.php?id=aswSnx.sys
http://www.carrona.org/drivers/driver.php?id=aswMonFlt.sys
http://www.carrona.org/drivers/driver.php?id=aswRdr2.sys
http://www.carrona.org/drivers/driver.php?id=aswRvrt.sys
http://www.carrona.org/drivers/driver.php?id=aswVmm.sys
http://www.carrona.org/drivers/driver.php?id=aswStm.sys
http://www.carrona.org/drivers/driver.php?id=aswSP.sys
http://www.carrona.org/drivers/driver.php?id=aswSnx.sys

Kindly perform the below steps -

Please remove "CDRTools/ElbyCDIO/DVD Region Killer/VirtualCloneDrive (elby CloneDVD? 2)/AnyDVD" since the drivers highlighted in RED are extremely out-dated and are probably the reason we are seeing CDROM.sys in the IRP Blockage.It appears that you are using two Antivirus Solutions. It is strongly recommended to use only one because having multiple security suites is bound to cause conflicts. I would suggest you to uninstall both Avast & McaFee using this **TOOL** & **TOOL** respectively. Once they are cleaned, feel free to install any security suite (Only one).
Let me know how it goes ^_^

Read other 2 answers
RELEVANCY SCORE 105.6

Hello everyone and thank you in advance for reading this thread,

I have BSOD situation for a while. When I hibernate or put my computer asleep and leave this mode my computer freeze for a while before showing of a BSOD with driver power state faillure. I have windows 8 sometime it start freezing rightaway or sometime It happens like 10 sec later (after logging with my password). It bug also when I restart my computer the clean way. I first decided to solved this issue by doing a refresh of the system (I don't if it's the proper word as I and my window8 are French). It implies that all the softwares I have installed were erased but my files were saved. It might not have been my smartest move as it didn't change anything ....

I have run a whocrashed and it tells me that the issue come from a kernel &system :

On Sat 31/05/2014 15:18:22 GMT your computer crashed
crash dump file: C:\WINDOWS\Minidump\053114-281984-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7B440)
Bugcheck code: 0x9F (0x3, 0xFFFFFA8004629060, 0xFFFFF8012DDF47E0, 0xFFFFFA80045E8010)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System

and

On Sat 31/05/2014 15:18:22 GMT your computer crashed
crash dump file: C:\WINDOWS\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bug... Read more

A:driver power state faillure -sleeping mode-ntoskrnl.exe-window8

Hi there,

Try updating your Intel rapid storage technology driver,


Code:
start end module name
fffff880`016e5000 fffff880`019af000 iaStorA (deferred)
Image path: \SystemRoot\System32\drivers\iaStorA.sys
Image name: iaStorA.sys
Timestamp: Mon Jul 09 13:42:33 2012 (4FFB4239)
CheckSum: 000AB20A
ImageSize: 002CA000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
There is a newer version here,

ASUSTeK Computer Inc. -Support- Drivers and Download K56CM

Under the others tab.

Have you tried updating your OS?


Code:
Microsoft Windows 8
Version du syst?me: 6.2.9200 N/A version 9200
Fabricant du syst?me d'exploitation: Microsoft Corporation
Configuration du syst?me d'exploitation: Station de travail autonome
Type de version du syst?me d'exploitation: Multiprocessor Free
Propri?taire enregistr?: Windows User
I only see a few updates installed. Have you tried updating to 8.1?

Read other 7 answers
RELEVANCY SCORE 66.4

Hello,

After many many hours of searching forums for solutions I have been unable to find a solution to my problem - so I decided to open a topic of my own and hope someone can help me with my problem specifically.

My problem is similar to this topic, although the solutions posted there aren't working for me. In short: I have been experiencing random but frequent BSODs (16 and counting) with the message 'driver power state overload' being displayed.

In my quest for a solution I wanted to upgrade my drivers, when I noticed my Nvidia Geforce 650M graphics card seems to have disappeared. When I try to install the latest driver from Nvidia's website I get the error 'graphics driver could not find compatible graphics hardware'. Attempting to open the Nvidia control panel gives me the message 'An Nvidia graphics card was not detected on your system' and I cannot find the card listed in the device manager (only the intel HD graphics family is listed under display adapters)... To be clear: I'm quite sure my laptop SHOULD have this card, it's just not detecting it for some reason.

Since the symptoms of my problem are exactly the same as described in the topic linked above, I have tried to follow the solution described by Arc. Installed Driver Fusion, started in in safe mode and tried to delete Nvidia drivers - but nothing seemed to be listed here. I still clicked delete but not sure if this actually did something or not.

A:BSOD driver power state / Nvidia graphics driver problems

Hello Zephos.

As per the supplied data, this is the specification of your graphics.

Code:
Name Intel(R) HD Graphics 4000
PNP Device ID PCI\VEN_8086&DEV_0166&SUBSYS_21031043&REV_09\3&11583659&2&10
Adapter Type Intel(R) HD Graphics Family, Intel Corporation compatible
Adapter Description Intel(R) HD Graphics 4000
Adapter RAM (2.080.374.784) bytes
Installed Drivers igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd32
Driver Version 9.17.10.2932
So, it says it is not nVidia. But as you are saying that it was Nvidia Geforce 650M, and it disappeared, the best option is to contract the vendor. I wish you are within warranty?

Read other 9 answers
RELEVANCY SCORE 66.4

Hello,

I would appreciate any help with the following problem: the pc sometimes seemingly randomly shows BSOD with errors named in the title, I also attach corresponding screenshots. The problem wont happen if the PC power is supplied from the adapter AND there is some content running on the screen (video in VLC f.ex.). Other important symptoms are: Can not turn off the laptop. There will be endless blue screen saying shutting down,while PC already stopped working. I also can not get the PC to sleep. If i I go to sleep mode, display turns black, PC is still working on and on and I can not go back to desktop anymore.

Thank you very much for your help.

Ales

Read other answers
RELEVANCY SCORE 66.4

First problem:
For a couple of day my computer has been running a little hotter than usual, with the cpu being used at 25% when I am doing barely nothing. Lately now it also has been bluescreening me with the driver power state failure label
0.00...9f
0x00...4
0x00...258
and some more but my picture cut the rest off.

I don't know what driver is the issue and what to do

Second problem:
I was looking through my drivers and trying to update them with device manger, but oddly whenever I try to update a driver my computer tries to update my bluetooth driver. When that happens the driver isn't found on my computer and gives me an error msg.

Thank you.

A:Driver power state failure & Bluetooth driver is missing

New update: I figured out how to update drivers separately, and I updated Realtek PCIE CardReader, synaptics ps/2 port touchpad, Mirosoft virtual WiFi miniport adapter #1 & 2, virtualbox host-only ethernet adapter,

Read other 1 answers
RELEVANCY SCORE 66.4

I keep getting these two error

i) Driver IRQL NOT_LESS_OR_EQUAL error
ii) Driver_Power_State_Error

It was fine last night then suddenly today, this error keep appearing. Is there a way to fix it? I've been searching for solution but I still don't know what to do. Please help

A:Getting Driver IRQL Not less or equal and driver power state error

BSOD - Posting Instructions - Windows 10 Forums

Read other 3 answers
RELEVANCY SCORE 66.4

Hello.I am new here so please excuse me for any mistake i might make.

Just when i sing in my account i get an error and my laptop restarts.
My operating system is windows 8.
I have collected all the information you might need with SF diagnostic tool.

Attachment 48873

Hope you help me.

A:Driver Power State Failure ntoskrnl.Unkown driver.

Hi Simiskos123 & Welcome to the forums ^_^,

I have analyzed your dump files and below has been provided an analysis of the latest dump file for informative purposes :-

Code:
******************************************************************************** *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa80046a3060, fffff880009bfb40, fffffa80088498f0}
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys
Followup: MachineOwner
---------
1: kd> !irp fffffa80088498f0
Irp is active with 4 stacks 3 is current (= 0xfffffa8008849a50)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 2 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 ffffffffc000000e
[ 16, 0] 0 2 fffffa80046a3060 00000000 fffff88006e17018-fffffa80085907c0
\Driver\pci nvlddmkm
Args: 000000... Read more

Read other 3 answers
RELEVANCY SCORE 66.4

I am receiving random BSODs with the subject line description.  My first stop was to the HP Support site to possibly update any drivers (like bios??).  I found many driver updates available, including 2 for the bios.  I really have no clue as to which driver updates to install, even after reading the details.  I looked for where it says recommended or required or something but didn't see it.  I then installed the HP Support Solutions and did a scan to determine what drivers it thought I needed and it came up with none.  Now I'm real confused.  Does that mean all the driver updates on the HP site are just optional?  Can someone provide a good site link to read about how to determine which drivers are needed?  Thank you for your help!

Read other answers
RELEVANCY SCORE 65.6

Hi all!

I have a HP Pavilion tx2000 P/N: KN966UA#ABA with Windows Vista Home Premium Build 6002: Service Pack 2.

I recently just bought a HP xb4 Docking Station for it, which uses Connector 3 for expansion.

When I first boot up, everything works fine, I'm checking email, or surfing the net, until suddely all the USB's would stop functioning and in a few minutes or so, I would get a blue screen with either a "Driver Power State Failure, or a Bug Code USB Driver" error.

I have been dealing with this issue for a number of weeks, searching online, or working with the issue myself, maybe finding some type of common application or hardware piece that might be causing it, but no luck!

I have attached the last Dump File.

Any suggestions?

Thanks and I can't wait for Win7!

-Noe
 

A:Driver Power State Failure & Bug Code USB Driver

Read other 14 answers
RELEVANCY SCORE 63.6

In the last few weeks I've been getting stuck and when rebooting I get a blue screen and minidump w/Driver Power State failure. Please help? I've done PERFORM/REPORT and attached.

A:Driver Power State Failure

Hi -

There are no attachments to your post.

Run Driver Verifier - http://www.techsupportforum.com/f217...ed-473665.html

Provide full system info - http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

Read other 2 answers
RELEVANCY SCORE 63.6

hi,
i am getting a driver power state failure any idea's where it's coming from also i know the DVD Rom is reporting a error and i have ordered a replacement so that maybe the source of the issue to.
Thanks,
Nathan Saunders

the system is a windows 7 pro 64 bit.

A:Driver Power State Failure

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800dab3680, Physical Device Object of the stack
Arg3: fffff800049d1518, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: fffffa8013b5bb00, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IRP_ADDRESS: fffffa8013b5bb00

DEVICE_OBJECT: fffffa800e1f4c70

DRIVER_OBJECT: fffffa800cd10220

IMAGE_NAME: cdrom.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4ce79298

MODULE_NAME: cdrom

FAULTING_MODULE: fffff88001b4e000 cdrom

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre

DPC_STACK_BASE: FFFFF800049D7FB0

STACK_TEXT:
fffff800`049d14c8 fffff800`035028d2 : 00000000`0000009f 00000000`00000003 fffffa80`0dab3680 fffff800`049d1518 : nt!KeBugCheckEx
fffff800`049d14d... Read more

Read other 2 answers
RELEVANCY SCORE 63.6

I think the general set of symptoms apply to my situation. I haven't experienced a shut down while using my laptop, but I've come home on occasion and it was shutdown, though I'm fairly certain I left it on. Additionally, if I close the lid and allow the computer to go into 'sleep' mode, it won't start back up...instead it says that it ran into a problem and will gather some info and restart for me. It also states that I can look up "POWER_STATE_DRIVER_FAILURE" to learn more about the problem...which lead me here.

I think I've followed the instructions properly but if there is information you need from me that isn't provided, please let me know.

Windows 8 (64-bit) came installed
Purchased early December 2012

Intel i7-3517U (Ivy Bridge)
Intel HD Graphics 4000
NVIDIA GeForce 610M
Factory power supply & battery

Lenovo Ideapad U410
Model # 20170

Of note about this particular laptop, I believe they were initially being sold with Windows 7, so although this one arrived, brand new (not refurbished), with Windows 8 already installed from the factory, I don't know that it wasn't sitting on a self in the warehouse with the previous version of Windows and then was upgraded before being shipped out. I have no clue if that actually matters at all. Lastly, these laptops were infamous for wireless issues resulting in slow connections, power signals and intermittent signal lose. From what I found online, it was a hardware issue that Lenovo addressed pr... Read more

A:Power State Driver Failure

Some more specifics...

Power supply is Lenovo, model ADP-65KH B, 20V output.

I also spent a bunch of time updating all the drivers, etc. that I could find...which didn't help. I didn't find any anti-virus software to remove, which I've seen in other threads can be problems.

Also, I forgot to attach the second report in my initial post so I've attached it here.

Read other 2 answers
RELEVANCY SCORE 63.6

Good day,
please help with a Blue Screen upon shut-down with a Driver Power State Failure. I found many entries relating to Windows Vista and 7. The ones on XP related to softwares I do not run on my computer. Thank you in advance!

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2600 @ 2.16GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 3071 Mb
Graphics Card: ATI Mobility Radeon X1600 , 256 Mb
Hard Drives: C: Total - 95393 MB, Free - 36492 MB; G: Total - 476937 MB, Free - 454396 MB;
Motherboard: Hewlett-Packard, 309F, KBC Version 54.50,
Antivirus: Kaspersky Anti-Virus, Updated: Yes, On-Demand Scanner: Enabled
 

A:Driver Power State Failure

http://support.microsoft.com/default.aspx?scid=kb;en-us;315249
 

Read other 1 answers
RELEVANCY SCORE 63.6

I have been getting a blue screen of death lately and I was hoping somebody could help me out with it. I included the attached minidump folder.

A:Driver State Power Failure

Hello,

Please take a look at the following thread and perform the steps.

Once you have the requested reports attach them to the next post.

This will provide more information to help diagnose your problem.

http://www.techsupportforum.com/foru...ta-452654.html

Read other 1 answers
RELEVANCY SCORE 63.6

not too long ago, after being put on sleep mode, my hp touchsmart has been showing a message on a blue screen and it says something about the power state driver has failed or something, i have no idea how to resolve this, does anyone know how i can? i would really appreciate it. thanks

Read other answers
RELEVANCY SCORE 63.6

Hi there,
please could someone help me. My laptop started crashing a little while back after itunes updated so i uninstalled and re-installed it but things got worse an crashes were happening a couple times a day, so i decided to do a fresh windows install to try repair damaged program files. well i am still having issues not as dramatic and as often but i really want to be done with this issue asap. help would be greatly appreciated.

A:driver power state failure

Code:
avgtdia.sys Thu Aug 1 20:06:31 2013 (51FA6B67)
avgrkx64.sys Tue Sep 10 04:42:59 2013 (522E4EF3)
avgfwd6a.sys Thu Sep 26 13:44:43 2013 (5243E5EB)
avgmfx64.sys Tue Oct 1 04:49:53 2013 (524A0011)
AVG contributes to BSOD's. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Code:
TuneUpUtilitiesDriver64.sys Fri May 25 16:28:19 2012 (4FBF5EC3)





Quote:
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence. If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything. 10 Tips on How to Properly Maintain Your Computer


Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Reduce... Read more

Read other 9 answers
RELEVANCY SCORE 63.6

Hi! I am Monjur Alahi from bangladesh. I have a HP Pavilion Notebook, recently i sufferd a problem during start up . Its take too much time display a message which is " Driver Power State Failure". How can i fix the problem with my Notebook ? Help me Please

Read other answers
RELEVANCY SCORE 63.6

Hello!

So there's this problem that I'm having with my computer. (laptop)
It seems to take absurdly long to shutdown, and I occaisionally get the BSOD 'Driver_Power_State_Failure'

Also, the CPU usage ranges from 70-99%. This is definitely not normal behavior.

I used to be playing Starcraft II with everything on medium-high, and have no issues whatsoever, now I'm even having trouble with low settings.

My laptop is an Asus k42jv, 4gb of RAM. What information do you guys need?

EDIT: Did I mention that previous BSODs had the computer collect data for crash dump, and recent BSODs have my computer crashing on the BSOD? (i.e. it's not able to collect data during the BSOD)

EDIT2: The latest BSODs : A device driver attempting to corrupt the system has been caught. The faulty driver currently on the kernel stack must be replaced
with a working version. This happened during shutdown, and when I rebooted, I was sending Microsoft information about 'this unexpected crash' and all of a sudden I was greeted with another Driver Power State Failure BSOD. My computer is extremely laggy and is constantly running at full speed (I can tell from the fans). Urgent help needed!

A:Driver Power State Failure help

When you get the bluescreen, do you get this information on the blue screen :
"Stop 0x0000009F"
and this: "(00000003, parameter2, parameter3, parameter4)" ?

Without dump files your job will be made much harder, because if you can't identify the exact driver that is causing the problem then it probably makes sense to replace/update all of you drivers, one at a time.

See here for instructions:
DRIVER_POWER_STATE_FAILURE 0x0000009f - Microsoft Answers

Sometimes when you look at the Properties for your devices in Device Manager you might see a problem device clearly. You also may have clues as to which device from your use of your laptop. And of course, if you've made any system changes or installations around the time the behavior cropped up now would be the time to mention that.

Read other 5 answers
RELEVANCY SCORE 63.6

Hi all, this is my first time here, and I need some help.

I'm using an Asus G71GX gaming laptop running Win7 Pro x64, and randomly my computer will just BSOD on me, and reboot. The minidump is too fast for me to read much past the first few lines, so I don't know entirely what's to blame. When it restarts, a dialogue box comes up saying "Windows has recovered from an unexpected shutdown". When I click on the more info tab, this is the information it gives me:


Quote:




Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA80063A8620
BCP3: FFFFF80000B9C4D8
BCP4: FFFFFA800BA8E190
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\091910-19484-01.dmp
C:\Users\Mike\AppData\Local\Temp\WER-42135-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?link...8&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt





Also, when I wake up my computer from sleep, sometimes it doesn't recognize my speakers, and no audio comes out either from my speakers or headphones. If I put my computer to sleep and wake it up again, they're recognized a... Read more

A:Driver Power State Failure

Hi -

Please follow these instructions --> http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

Read other 17 answers
RELEVANCY SCORE 63.6

Hey all,

I just put Windows 8 Professional 32-Bit on my Gateway M100-E laptop. It seems to crash when it is restarted and it's power state has changed. As in from battery to power cord and vice-versa. The BSOD tells me the error is called a driver power state failure. This laptop is 100% stock with the latest Windows 8 updates. The antivirus I'm using is the included Windows Defender and Windows Firewall. Attached are my log files.

A:Driver Power State Failure

First of all

update this driver

Intel Raid StorPort Driver

Intel Download Center

Read other 4 answers
RELEVANCY SCORE 63.6

Computer was recently updated to Windows 8. When laptop lid is closed and opened, BSOD instead of sleep. I need to know which driver is causing it. "grab all" results attached. Thanks.

A:Driver power state failure

Welcome to Eight Forums,

Looks like a mixture of drivers from Acronis and Total Mounter seems to be the cause of the BSOD.
I would uninstall both these programs and their drivers and see if the sleep mode BSOD is eliminated.
Do you have a SSD and is the firmware for it up to date? Check for one, it may bring stability.

Code:
******************************************************************************** *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa8005c49050, fffff8033d53c7e0, fffffa8009021010}
*** WARNING: Unable to verify timestamp for KSPrt64.sys
*** ERROR: Module load completed but symbols could not be loaded for KSPrt64.sys
Probably caused by : KSPrt64.sys
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRI... Read more

Read other 3 answers
RELEVANCY SCORE 63.6

Whenever my computer goes to sleep overnight and i try to wake it up the following morning it does not wake up at all and pressing the power button doesn't wake it up either. I had to open up my computer take out my ram and put it back and pressed the power again to power the computer back up again and when i do i get a bsod error driver power state failure ntoskrnl.exe. Attached is the dmp files and everything appreciate the help

A:Driver Power State Failure

You have a NETGEAR WNDA4100 N900 Wireless Dual Band USB Adapter:





I do not recommend using wireless USB network devices. Especially in Win7/Win8 systems.
These wireless USB devices have many issues with Win7(and I suspect with Win8) - using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7/Win8 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.



We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:





There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website). Be sure to update ALL controllers on the motherboard! I STRONGLY suggest not using controller drivers older than mid-2012 with SSD's.
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. ... Read more

Read other 6 answers
RELEVANCY SCORE 63.6

Sir I got the issue when I installed Windows 8.1 64bit in my laptop after installing I restarted my laptop after restarting it took atleast 10 minutes to load the operating system and after loading I got a blue screen showing DRIVER POWER STATE FAILURE and got the message your PC ran into an problem and need to restart it works good after restarting but every time I power on my computer I get the same message and it takes very much time to load the operating system after words it runs good please can you fix this

Read other answers
RELEVANCY SCORE 63.6

Hi Allfor the past days I've bumped into BSOD Driver Power State Failure quite a few times. All my drivers are up to date, but I suspect my BIOS not to be. My BIOS version is: CDCN26WW, 12-10-15. Could the problem be around the BIOS?

Read other answers
RELEVANCY SCORE 63.6

Lately when I shutdowm my computer it can take as long as 30 mintues or I get a BSoD with a Driver power state Failure. Can anyone help? Im not sure how to go about taking minidump as others have done. Im quite knowledgeable on computers but I have previously tried to install whats needed to read the dumps but have failed.

A:Driver power state failure

Ok, where am I going wrong when installing/running WinDBG???

Read other 2 answers
RELEVANCY SCORE 63.6

Windows 7 pro..I have been getting driver power state failure at shutdown. what do i need to copy and post to address this issue? tks

A:driver power state failure

http://www.sevenforums.com/crashes-d...tructions.html

Read other 1 answers
RELEVANCY SCORE 63.6

Hello,
I've been getting the BSOD for Windows 8 since I've downloaded it. I purchased the digital copy online from Microsoft, but don't have a CD to do a reinstall, and really would hope to avoid wiping all my files. Sometimes I go weeks without getting the error, but I want to fix it once and for all. It always happens upon my PC "reawakening". Attached is the most recent Minidump https://skydrive.live.com/redir?resid=12EC8E4E1EFCF023!575&authkey=!ACvFmfUZxRKkwgM
 

A:Driver Power State Failure

If you have your upgrade key you can enter it HERE and download the upgrade again. If I remeber correctly they Give the option[or did before] to put the software on a USB drive.

Read other 11 answers
RELEVANCY SCORE 63.6

We have been getting the blue screen of death very intermittently over the past several weeks and aren't aware of any new hardware or software that has been installed to cause any issue. Below is the full technical information. Does anyone know what is causing
the BSOD?
Stop: 0x0000009F (0x0000000000000003, 0xFFFFFA800423CA10, 0xFFFFF8000413D748, 0xFFFFFA80078A8CA0)
Thanks!

Read other answers
RELEVANCY SCORE 63.6

dear sir,

after i installed win7 64 bit, i kept facing the bluescreen, it shows "driver power state failure", my configuration is as below,

MB: Rampage III Extreme
DRAM: 12GB OCZ
OS: win7 64 bit

can you help me preventing bluescreen again?
attached is the .dmp

appreciated!!

A:driver power state failure

Hi -

Run Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or until it BSODs your system, whichever is less. Then . . .

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions - Windows 7 & Vista

Regards. . .

jcgriff2

`

Read other 5 answers
RELEVANCY SCORE 63.6

Hey i have a problem with my toshiba satellite it does not boot up correctly when i start the computer it takes long time than usual and also after it starts the windows 7 wallpaper comes and normally there is a log in button to log into my pc but now theres no login button its only the normal windows 7 wallpaper.
Well One night i was using the computer and i was using speed up my pc and playing games and it got very slow and it got a lot stuck so i had to force it down and after i start it up again it says the computer was unable to boot properly and stuff but after that i have tried few stuff and now no error comes up but it does not start correctly i have no way on going into my computer.
The stuff i did was i tried sfc and it was not able to fix the problems it said check the cbs file or something for the logs of the errors and also before the errors come up but after i did all four of these no errors come it starts but no login button only windows 7 wallpaper this is what i tried doing
type > bootrec /fixmbr
type > bootrec /fixboot
type > bootrec /scanos
type > bootrec /rebuildbcd
Those four i tried.

Like i just told i tried all those four options of bootrec and it made the computer boot up but only the windows 7 wallpaper is there when it should be the windows 7 wallpaper and a log in button but the login button is not there i can post pictures if needed.

Startup repair could not fix the problems.
Sfc could not fix the problems.
Bootrec c... Read more

A:Driver Power State Failure

I get a Driver_power_state_failure with a stop : 0x0000009F(0x00000004,0x00000258,0x8658F020,0x8397CB24)

Yesterday i was working with my computer and i was running a game and fix my pc and it was very slow it got stuck and i forced it down and when i start the pc i get that error.

I have tried sfc and bootrec and startup repair none of them can fix the problem it says unable to fix the problem.
I also have the recovery disk and can view the hard disk files and also use cmd but i tried the startup repair and it could not fix the problem.

Please help here is few pictures:

Read other 8 answers
RELEVANCY SCORE 63.6

I periodically get a driver power state failure BSOD. It's happens about once a week or so.

Relevant files attached.

A:Driver Power State Failure

Check your post again, as there are no files attached.

Also, fill out your system specs. Click on the link in my signature to do it.

Read other 5 answers
RELEVANCY SCORE 63.6

Hi i juz had a problem recently with my new dell laptop xps1530. for a few times it had shut down automatically when i'm not using it. it stated tat it had driver power state failure which i cant figure out after looking at all the posts here. this is my dump files below....

pls help!!
 

A:Driver Power State Failure

I have seen a lot of similar "Power State" failures on computers using wireless when returning from sleep or idle.

Your minidumps, which are all the same as below, seems to confirm this >>

Debug session time: Wed Jun 17 14:49:34.117 2009 (GMT-7)

BugCheck 9F, {3, 8511bd50, 852aa030, 868c5c40}

Unable to load image \SystemRoot\system32\DRIVERS\CnxTrLan.sys, Win32 error 2
*** WARNING: Unable to verify timestamp for CnxTrLan.sys
*** ERROR: Module load completed but symbols could not be loaded for CnxTrLan.sys
Probably caused by : CnxTrLan.sys (>> USB Wireless >> Conexant?)Click to expand...

http://www.google.com/search?client=opera&rls=en&q=CnxTrLan.sys&sourceid=opera&ie=utf-8&oe=utf-8

I would try updating the wireless drivers, if one is available, or get something from a different vendor.

A removal and reinstall alone may also just work.
 

Read other 3 answers
RELEVANCY SCORE 63.6

I've recently inherited a laptop from a friend of mine. I did a reformat/reinstall of Windows, and have been getting fairly a persisitent yet seemingly random BSOD. Always accompanied by the same message: driver power state failure. I am assuming that I have installed the wrong driver for one or more components, despite grabbing them all from the manufacturer's website. I am hoping you guys can help me narrow down which one.

My system:

Windows vista x64 SP2 Full retail (I think)
Original OS was the same, although likely OEM
Machine is 4 years old
Reinstalled Windows about 2 weeks ago

CPU: Intel Core 2 Duo T5750 2.0 Ghz
Video Card: ATI Mobility Radeon HD 2400 XT
MotherBoard: Acer Columbia, Chipset: PM965, Southbridge: 82801HBM (ICH8-ME)
Power Supply: ???

System Manufacturer: Acer
Exact model number: Extensa 5620 6396

Thanks for taking a look. I hope I gave you all the necessary info.

A:Driver Power State Failure

Crashes caused by 46088 15/03/2010 8:23:32 PM "C:\Program Files\M-Audio\Xponent\Streaming\MAudioXponent.sys"Contact M-Audio Support for help with the problem: M-AUDIO - Contact Tech Support


Analysis: The following is for information purposes only. The following information contains the relevant information from the blue screen analysis:

Code:
**************************Fri Dec 14 08:07:19.500 2012 (UTC - 7:00)**************************
Loading Dump File [G:\BSODDmpFiles\Gnosys\Windows7_Vista_jcgriff2\Mini121412-01.dmp]
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (2 procs) Free x64
Built by: 6002.18686.amd64fre.vistasp2_gdr.120824-0336
System Uptime:0 days 20:05:54.966
*** WARNING: Unable to verify timestamp for MAudioXponent.sys
*** ERROR: Module load completed but symbols could not be loaded for MAudioXponent.sys
Probably caused by :MAudioXponent.sys
BugCheck 9F, {3, fffffa8004ee9240, fffffa80043da320, fffffa8005072010}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8004ee9240, Physical Device Object of the stack
Arg3: fffffa80043da320, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa8005072010, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_3_POWER_DOWN_IMAGE_MAudioXpone... Read more

Read other 1 answers
RELEVANCY SCORE 63.6

Mod Edit:  Split from http://www.bleepingcomputer.com/forums/t/514326/bsod-post-windows-81-update-and-driver-issues/ - Hamluis.
 
Hey
I am having a similar problem regarding the windows 8.1
Whenever i try to shut down or make my laptop to sleep it simply does not turns off. and after sometime the BSOD appears stating different reasons like DRIVER_POWER_STATE_FAILURE and some more.
i saw a previous post and tried to follow the steps u asked.
here's my speccy link
 
http://speccy.piriform.com/results/Qu8S1paqRIp6WSfbQkoWtGn
 
My computer model is DELL Inspiron 15R 5520
 
And here's my mini toolbox results:
 
MiniToolBox by Farbar  Version: 23-01-2014
Ran by VISHAL (administrator) on 30-03-2014 at 00:15:18
Running from "C:\Users\VISHAL\Downloads\Programs"
Microsoft Windows 8.1 Pro  (X64)
Boot Mode: Normal
***************************************************************************
 
========================= Event log errors: ===============================
 
Application errors:
==================
Error: (03/29/2014 11:43:08 PM) (Source: Steam Client Service) (User: )
Description: Error: Failed to poke open firewall
 
Error: (03/29/2014 09:47:56 PM) (Source: Microsoft-Windows-Defrag) (User: )
Description: The volume Local disc (C:) was not optimised because an error was encountered: The parameter is incorrect. (0x80070057)
 
Error: (03/29/2014 09:23:20 PM) (Source: ATIeRecord) (User: )
Description: ATI EEU Clie... Read more

A:Driver Power State Issues

And here's my minidump files list
 
http://www.mediafire.com/download/opn5ffzdav4q2dg/Minidump.zip

Read other 10 answers
RELEVANCY SCORE 63.6

I am running Vista on a Sony Vaio. Yesterday I plugged my phone into the computer (but did not download any new software) and since then I've had 2 driver power state failures. This last one is frozen and making a loud noise. Technical information: STOP: 0x00000009F (0x00000003, 0x86CFA8D8, 0x83FAA260, 0x86F4ED10). What can I do?

A:Driver Power State Failure

Welcome to TSF.

Follow the instructions here: http://www.techsupportforum.com/1871981-post2.html

It will provide us wit more information about your computer and the problem.

Clever user name, by the way.

Read other 1 answers
RELEVANCY SCORE 63.6

For some reason whenever i do something that uses my graphics card i get a BSOD. I disabled it to confirm that it was indeed causing me issues.

Ive reflashed the bios, updated the driver, rolled it back and even did a complete reinstall to factory settings.

I upgraded to Windows 10 as well to see if it would fix the issue but it has not done anything.

The graphics card is a GTX 670m.

Edit: Sometimes i will get the BSOD doing normal things such as browsing or even being on the desktop.

Thanks

A:Driver power state failure.

The latest dump indicates a problem with nvlddmkm.sys:

Code:
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
The driver is old: Tue Aug 28 03:52:38 2012

According to the output of dxdiag, you have a Intel(R) HD Graphics 4000.
You also have a NVIDIA GeForce GTX 670M but it doesn't appear to be the active video card. Update that driver to the latest WHQL version which is 368.39.

Looks like the Intel is onboard and the Nvidia is a PCI-E card.

Read other 1 answers
RELEVANCY SCORE 63.6

i have HP-Pavallion slimline s3430f desktop , i have windows 7 x64 bit and the blue screen comes anytimes it goes sleep and its moving very slow....i think i have a bad driver, but i cant figure out where.


can some one help me..thanks in advance

A:Driver power state failure

I had the same problem. Try uninstalling the "HP ProtectSmart Hard Drive Protection" drivers. I did that and my HP is running more smoothly now, but it was easy getting rid of the old drivers. I had to manually copy the new "HP 3d Driveguard" drivers to replace the old Protectsmart drivers. Good luck.

Read other 3 answers
RELEVANCY SCORE 63.6

i have a toshiba satellite u405d-s2874 and i was transferring files from one portable hard-drive to another and i got a blue screen with the driver power state failure on it. the laptop restarted and all and i thought that maybe it fixed itself or something like that so i contiinued doing what i was doing and now after a while the laptop goes to the blue screen with the power state failure. i searched for it on google and it lead me to a post on your site. i read it and its about the same problem cept for the power button on the harddrive thing. its happened about 3 times or so while i was trying to read the post and sign up for your site. please need some help...oh can you tell me if i made a good buy by buying a toshiba??
 

A:Driver Power State Failure

Have the same laptop and same problem. As far as I can tell it is due to a bad SD card reader driver. I downloaded the "Debugging Tools for Windows x64" from here and used it to load the memory dump file located in "C:\WINDOWS\Minidump". You can follow the description here on how to do this. The debugger identified the file "o2sdx64.sys" as the culprit so I went over to toshiba here and downloaded the latest SD reader driver. The old version of this file was identified by the device manager as 2.0.2.909 and after updating was 2.0.2.915.

I have not tested this for long but so far no BSOD. I did notice this error seemed to occur often when I was swapping files off the SD card I am hopful.

Hope this helps.

By the way I am running Vista x64
 

Read other 1 answers
RELEVANCY SCORE 63.6

Hey guys,

So I did try googling it however I can't seem to open the dump file.

I've installed the WinDbg etc from Microsoft Website however, says access is denied when trying to open within the program.

So what do I need to do?

Thanks!

A:Driver Power State Failure

DESKTOP-HSQP67U-28_02_2016_145638_40.zip

Read other 0 answers
RELEVANCY SCORE 63.6

I just got a BSoD with the error as DRIVER_POWER_STATE_FAILURE. I have attached the logs.

Also, I was googling for this and one site told to run sigverif.

The output for that is also attached. The second and third one are okay because I allowed them to install. They are a custom trackpad driver for Windows on Mac (Trackpad++ Project [Home Page]). However, the first one, I don't recognize. Is that the problem?

And I think the problem is with USB. I know you said last time it is Kaspersky but I have observed that whenever my USB ports act funny after waking up from sleep, the system won't go to sleep again. What I started doing was whenever I observe my USB port going bonkers, I restart the system. Today, I did the same thing and voila BSoD.

I would like to add one last thing. During our last conversation (if usasma is reading this), you mentioned 2 apple drivers which were older than the one in Bootcamp 5. Those are because Trackpad++ updates these drivers and replaces this. I don't think this is a problem as many of my friends are using it without issues. But, wdfcoinstaller01011.dll is what I am suspecting.

I also did Step 1 of the advanced troubleshooting here and am attaching that file (via SkyDrive as it is too big to attach here). http://sdrv.ms/17CINyA

A:Driver Power State Failure

The wdfcoinstaller is OK, here's a link to a description of it: Redistributable Framework Components (Windows Drivers)

The dump files blame 2 things - so let's start this out slowly.
First, uninstall Kaspersky and see if the system still BSOD's. Give it a day or two.
Then, if it does still BSOD, uninstall the VMWare program and see if it still BSOD's

Leave the system as it is, and upload the memory dumps.
We'll see what they blame and we'll move on from there.
IRFilter.sys Wed Jul 2 15:53:12 2008 (486BDCA8)
IR Receiver Driver from Apple Inc.
http://www.carrona.org/drivers/driver.php?id=IRFilter.sys

vmusb.sys Tue Sep 1 07:52:14 2009 (4A9D0AEE)
VMWare usb client driver
http://www.carrona.org/drivers/driver.php?id=vmusb.sys

applemtp.sys Tue Sep 22 18:18:06 2009 (4AB94D1E)

applemtp.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

CS420x64.sys Thu Nov 11 19:04:13 2010 (4CDC847D)

CS420x64.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

applemtm.sys Wed Dec 22 22:01:31 2010 (4D12BB8B)

applemtm.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

Ext2Fsd.SYS Fri Jul 8 13:08:38 2011 (4E173996)
... Read more

Read other 1 answers
RELEVANCY SCORE 63.6

I shut down my laptop as I usually do, but I was short in time, so I didn't watch it turn off. When I came back home a few hours later, I found it turned on, showing the lock screen. Apparently it had a BSOD while it was shutting down and then restared.
I ran bluescreen view and it said it was a driver power state failure cause by ntoskrnl.exe, but I have no idea what to do to prevent it from happening again... It was the only time so far, but I had that same BSOD on another laptop and it was recurrent, a real pain in the ass... I don't want that to happen to this laptop too.

I was hoping maybe you could help me figure out how fix that... thanks in advance!

A:Driver Power State Failure

Not much info here.

I wonder about USB devices first - as there's traces of Windows USB drivers in the stack.
In particular I'm suspicious of the Rainbow Tech/SafeNet USB Security Device - as it's driver (Sentinel64.sys) dates from 2008 and I've seen problems with these devices in the past.

If I'm correct, uninstalling the software for this device and physically removing it from your system should stop the BSOD's.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

hamachi.sys Thu Feb 19 05:36:41 2009 (499D3639)
LogMeIn Hamachi Virtual network interface driver
http://www.carrona.org/drivers/driver.php?id=hamachi.sys

KMWDFILTER.sys Wed Apr 29 02:20:48 2009 (49F7F1C0)
UASSOFT.com HID (mouse) Driver
http://www.carrona.org/drivers/driver.php?id=KMWDFILTER.sys

PxHlpa64.sys Tue Oct 20 14:08:42 2009 (4ADDFCAA)
Sonic CD/DVD driver (used by many different CD/DVD programs)
http://www.carrona.org/drivers/driver.php?id=PxHlpa64.sys

Rt630x64.sys Wed Oct 19 08:12:55 2011 (4E9EBEC7)
Realtek PCI/PCIe Adapters
http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys

If all of this doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings

An... Read more

Read other 1 answers
RELEVANCY SCORE 63.6

I've had this issue with windows 7, 8 and now 8.1 and i'm slowly getting tired of it.

Whenever i wake my pc up, it crashes about 10 minutes into use with the error "Driver power state failure" & it writes a minidump (see attachment for sample)

Currently this is a clean install with only custom ATI drivers installed for my graphics card. I did install software already (lightroom/office/..) but generally i'm only running firefox when it happens.

The minidump mentions iscsi, i do use this occasionally (my nas isn't always on so it can't always find the iscsi target on the server)

all help towards a solution is very much appreciated!

Kind regards
Rik

Some error details





DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe000040961e0, Physical Device Object of the stack
Arg3: fffff8002a7a8aa0, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: ffffe00003989180, The blocked IRP
DRVPOWERSTATE_SUBCODE: 3

IMAGE_NAME: msiscsi.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 5215f78c

MODULE_NAME: msiscsi

FAULTING_MODULE: fffff80006960000 msiscsi

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

STACK_TEXT:
fffff800`2a7a8a68 fffff800`28fff8d2 : 00000000`0000009f 00000000`00000003 ffffe000`040961e0... Read more

A:Driver power state failure

now with the minidump, i'm now using the SD diag tool to add more details.

Read other 2 answers
RELEVANCY SCORE 63.6

Hey all.

Gotten the power state driver failure bsod a couple times now.. I like to think I take good care of my computer for the most part, and so with this happening a few more times then I would like, for what seems like no reason - I figure I should ask for some help in fixing it.

I got me a toshiba laptop AMD Turion X2 Dual Core RM-70
4GB SDRam
Vista Home Premium (64-bit)



Help is much appreciated

Thanks folks.

A:BSOD Power state driver

3 of the 5 BSOD's blame o2sdx64.sys - a component of your O2Micro Integrated MMC/SD controller.

Please download a fresh copy of the driver for the SD card reader from the Toshiba support website ( http://www.csd.toshiba.com/cgi-bin/t.../jsp/home.jsp# )
Then uninstall the one currently installed on your system.
Then install the freshly downloaded driver and check for further BSOD's.

Also, please remove these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall/remove:

Quote:




How To Find Drivers:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.




- some driver links are on this page: http://www.carrona.org/drvrdown.html

Here's the older drivers:

Code:
AtiPcie.sys Mon Nov 06 11:59:54 2006 - ATI PCIE Driver for ATI PCIE chipset
mdmxsdk.sys Mon Jun 19 17:27:26 2006 - Conexant Diagnostic Interface DRIVER
QIOMe... Read more

Read other 1 answers
RELEVANCY SCORE 63.6

A couple of days ago I did a Windows 10 64-bit "clean install" on my Dell Inspiron 1564 Laptop, and it has been running well, basically. However, I did experience a Driver Power State Failure on startup today. It immediately reached 100% complete in collecting error info, but did not restart after (as it said it would). I waited for approximately 10 minutes more and then manually rebooted. It came up fine.

Going forward, I am not sure what I should be doing to correct the situation. If someone has recommendations, I would be appreciative.

By "clean install", I mean I upgraded from 7 to 10 - then I did a computer recovery - reset this pc, at which time I told it to remove all my personal files and applications. I think I have 4 GB of ram, but quite frankly, the system information screen has changed; and even digging into the Device Manager information leaves me no less confused about what is installed. So I hope this is enough of the basics for someone to give me a basic next step.

Thank you,
Minderbinder

A:Driver Power State Failure

If it doesn't pop back up, I wouldn't worry too much about it. Sometimes drivers can fail every once in a while.

Read other 1 answers
RELEVANCY SCORE 63.6

Hi, i have same problem with my laptop s55t-c5325...Here i upload the zip file from the log collector, maybe this will help me.

Thank you

A:Driver Power State Failure

Please update your installation to version 10586
Windows 10 Forums

Code:
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 10 Kernel Version 10240 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 10240.16841.amd64fre.th1_st1.160408-1853
Machine Name:
Kernel base = 0xfffff802`4d614000 PsLoadedModuleList = 0xfffff802`4d939070
Debug session time: Wed Jun 1 17:15:51.596 2016 (UTC + 2:00)
System Uptime: 0 days 0:27:18.458
Loading Kernel Symbols
Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

Read other 0 answers
RELEVANCY SCORE 63.6

hey
Lately when ever i shutdowm my computer i eather get shutdowns taking as long as 30 mintues or a BSoD with a Driver power state Failure. Can anyone help? I have noticed that members here attached the Minidump as a .zip file, for you to figure out the problem , I dont know how to do that ..There are no other problems with system proformace. Also, when it restarts again it gives me messag that hardware ID missing, I dont know what does that mean.. shall I reformat the computer??

my PC information is
HP pavilion tx 2500
Windows Vista, SP1

looking forward to your reply and support..

A:Driver power state Failure

Please follow the directions here to upload the information that we need: http://www.techsupportforum.com/1871981-post2.html

Read other 3 answers