Over 1 million tech questions and answers.

mysql virtual IP server and client same machine

Q: mysql virtual IP server and client same machine

I am using a virtual IP to provide access to a mysql cluster. However since I don't have unlimited hardware I am unable to put the mysql servers as the sole application on each system. I end up with both an instance of apache and mysql on each system. I've configured the network with LVS and ldirector for load balancing. I've assigned a virtual IP to the system, say 192.168.1.107, I make that the primary IP to eth0 on the load balancer and as a loopback interface on the two machines (sql1 and sql2) running the mysql servers.

If I make a request from any server that is not sql1 or sql2, everything works fine, but when I am making a request from either of those machines it will not send to the load balancer, instead it picks up the loopback and just uses the local server.

Does anyone have any ideas for how to over come this? I'm kind of new to VIP's and anything more advanced than a static/dynamic ip address. I believe my setup is using direct routing.

Thanks!

RELEVANCY SCORE 200
Preferred Solution: mysql virtual IP server and client same machine

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: mysql virtual IP server and client same machine

Guessing (but nobody else tried)..How about puttin and entry entry in the local host file to redirect?

Read other 2 answers
RELEVANCY SCORE 74

I'm using an AlienWare M14 machine. I tried to create a virtual machine locally using Client Hyper-V on Windows 8 Pro, but it still doesn't work (took me a lot of time). I added the Hyper-V features in "Turn windows feature on or off", and all of the requirements to run Hyper-V are fulfilled (SLAT, BIOS, 64 bits, ...) (I attach the msinfo32 output in this post). At the last step in creating a virtual machine, it says "... General access denied error... (0x80070005)" (for details, check my attached image). I googled, tried some solutions but still no luck so far.

Thanks for any help.

A:Error creating virtual machine (Client Hyper-V, Win 8 Pro)

Actually, the error is general access denied. I have already uploaded a new image. Any help would be appreciated. Thank you.

Read other 19 answers
RELEVANCY SCORE 72.4

Well,
 
'm having so many issues I don't know where to begin... Maybe someone can help me identify this file/code?
 
Here is a the text from a file called bootmgr.exe.mui 
Located in c:\Windows\boot\PCAT
 
By the way, this is about the 5th time I've written this..,it keeps getting shorter and shorter.  My text keeps mysteriously getting highlighted and deleted. Or my browser shuts off,,,anyway...
 
 
 
MZ       ÿÿ  ¸       @                                   À   º ´    Í!¸LÍ!This program cannot be run in DOS mode.
$       ÝôÙ™|šŠ™|šŠ™|šŠ‡.Š˜|šŠ‡.Š˜|šŠRich™|šŠ                        PE  L RšîH        à "!          ü                                ... Read more

Read other answers
RELEVANCY SCORE 72

I'm not sure if it's the right forum, but I'm having trouble connecting my client/server in my virtual PC. they just aren't seeing each other when it comes to connecting them to continue my server class.

not sure what info you need to from me, so sorry if I sound like am idiot.

server 2003
windows xp

running on virtual PC

I'm running windows 7 on my computer
 

A:Can't connect client/server in virtual PC

Read other 6 answers
RELEVANCY SCORE 68.8

Last night when shutting down the virtual machine within Win7, the virtual machine hanged. Win7 gave me the option of doing a forced shutdown, which I accepted. But now this morning when I try to re-open the virtual machine (which is powered down) I keep
getting the error message "The virtual machine could not be started. An unknown error occurred."  PLEASE HELP: I have months of research stored in the virtual machine which I need to retrieve. Any suggestions gratefully received.

A:URGENT: My XP-Mode Virtual Machine has crashed: it is powered down and refuses to power up. PLEASE HELP: I have months of research stored in the virtual machine which I need to retrieve.

Hi,

 

The issue could be incorrect configuration of XP mode.

 

Trying to rename the . vmc and .vsv from C:\Users\Username\AppData\Local\Microsoft\Windows Virtual PC\Virtual Machines
and run Virtual Machine again.

 

Best Regards,

Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Read other 5 answers
RELEVANCY SCORE 68.4

Host OS: Windows 2003 Server running on domain under Active Directory
Guest Virtual Machine OS: Same

The Host Machine and Host OS operate as expected, and can interact with everything in the entire network, including

Other w2k3 servers
Domain Controllers
XP PCs
Linux servers
Linux PCs
However, the Virtual Machine was created using - and runs within - MS Virtual Machine 2005. The VM thinks it's a stand-alone server. It doesn't "see"

the HP 373i gigabit Network Interface Cards (NICs)
anything else in the network
the proxy server/internet gateway
anything on the host's hard drive
The VM DOES see

a non-existent NIC (a generic Intel adapter)
the host machine' s CD-ROM
As an aside, I have the same problem with a PC
Host OS: XP SP2
Guest Virtual Machine OS: Ubuntu Linux 7.10
That VM doesn't "see" the NIC, and lives in its own dark cave.

In each case, the VMs see all the other hardware - except the NICs and hard drives not internal to the VM.

How do I get the VM to acknowledge the NICs so that I can install the NIC drivers and open the VM's eyes to the rest of the Domain?
 

A:Solved: server 2003 - virtual machine - NIC

That 'non-existent' NIC is a 'virtual' one running as a Device on the Virtual Machine.
I'm using Virtual PC 2003 but I think yours is similar.
Try setting the 1st virtual NIC to use each option in the drop-down list in the Settings window.
I think NAT will work but I'm not sure, I only have a small home network so am not familiar with your situation.
 

Read other 3 answers
RELEVANCY SCORE 68.4

Hi,

My company bought out a company recently and now I have to manage a new server. The server is windows 2000 server that is getting fairly old now (not sure exact age of server). There are no more than 10 users accessing the server. It is running out of hard drive space and sometimes the tape backup drive acts up. This server does a bunch of different jobs. The server is running exchange server 2000, a blackberry server for a couple users, ms sql server (I think 2003?) for some accounting software and it is also a file server.

I was thinking of replacing it with a windows 2008 server but that would mean buying all new server software and office 2007 to connect to exchange 2007. Than I would need to migrate data to the new server. I have a some experience with migrating right now as I have setup a test lab to try things out using virtualbox.

So I have also been thinking about converting the windows 2000 server to a virtual machine and running vmware or other virtual machine software on a new server and using the image from the old server.

So my question is, would converting the server to a virtual machine and running it that way be a good idea? It would save a lot of money in software. Does any one have any pro's and con's to this type of idea or would getting a new server be the best option?

Thanks for all the help.
 

A:need advice if I should convert a server to a virtual machine

In my limited experience, virtualization is best for larger corporations that want to reduce the amount of hardware, energy consumption, and space requirements. A lot of the time, if you're a smaller company it would actually cost more in licensing costs to virtualize than to buy another server.
 

Read other 2 answers
RELEVANCY SCORE 68

I have Hyper-v running on Dell Precision T3600 with Windows 8 OS.  I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start.  (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off.  The BIOS has virtualization enable.  Help!!! driving me nuts for a week now.
Nick :(

A:Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

Finally got it to work.  Our admin lock down the devices that could be installed on the computer.  It turned out that one of the vm devices was not allowed to be installed.  Thank community.
nick

Read other 11 answers
RELEVANCY SCORE 66.4

Hi,
On my local host machine there is An E Drive with a capacity of 500GB and it contain VHD file for my virtual machine. Now according to the current situation My E drive is about to fill which is now 490 Gb.
One my Virtual Machine my disk size is 900 Gb . Out of 900 Gb 490Gb is full. If i am deleting some files from my virtual machine is not making any difference the size of VHD file on my host computer.
What is the best way to reduce the size of the my VHD file . 

Help will be Appreciated.
Thanks.

Read other answers
RELEVANCY SCORE 66.4

I'm trying to run Client Hyper-V on my Windows 8 Pro machine. I was able to successfully install the service, and can create virtual machines and hard disks on my local system. I can even start them, and see boot activity via the preview window in the MMC.
I cannot, however, connect to any machines from the local system: when I do, it hangs on "Connecting to <machinename>" for 30 seconds before it pops up with the dialog:
"Cannot connect to virtual machine. Try to connect again. If the problem persists, contact your system administrator."
Obviously, because this is Client Hyper-V, I am the system administrator, so I scour the Internet to solve my problem. I see solutions related to firewalls, administrative permissions, a few other things, and nothing has worked. I also tried creating
a virtual machine on a Windows 8 Enterprise system (which can connect to it just fine) and export it for the Pro machine to import, and I still cannot connect to it, whether the VM is registered in place or copied to the host.
Some other notes:
- None of these systems has an OS installed - two locally created ones either had no boot or booted off a Linux LiveCD, and the exported one attempted to do a PXE boot. Thus, I cannot attempt to link via Remote Desktop since the computers have no names
- Hyper-V has some other quirks on my system as well: in order to stop a virtual machine, I have to end the vmwp process - which restarts the machine - and then stop it fr... Read more

Read other answers
RELEVANCY SCORE 65.6

Hi all,
I am getting this error, whenever I try to connect to server from Hyper-V, I choose local server then I get this message

Check that the Virtual Machine Management service is running and that you are authorized to connect to the server.
In the services, I don't have this service... What should I do...?

Mai Omar Desouki | Software Consultant | Infusion | MCP, MCTS, MCPD, MCITP, MCT Microsoft Certified Trainer & MCC Microsoft Community Contributor | Email: [email protected] | Blog: http://moresharepoint.wordpress.com

A:Check that the Virtual Machine Management service is running and that you are authorized to connect to the server

Here is the solution
1-make sure turn on virtual platform on bios
2- from turn windows features on or off expand hyper-v and enable hyper-v platform (Must)
3- restart your machine it should be working without problem.

This 100 % works

Read other 17 answers
RELEVANCY SCORE 64.4

This started happening few days ago probably after a windows update. I tried uninstalling HyperV component restart, readd restart etc no luck. My existing hyperv virtual machines fail with the same error, to create a new one also fails.
Please advise, Thank you.
The server encountered an error while creating New Virtual Machine.
Failed to create a new virtual machine
New Virtual Machine failed to realize
Failed to access configuration store 0x80070003




Gokhan Varol

Read other answers
RELEVANCY SCORE 63.6

i have the server with windows 2003 SP1 and i executed replication active directory, domain controller on the new server, as i have two servers. all expect one client computer work ok.onthe problematically computer is with the windows me.
problem is:
when i shut down old server,the computer with win me drop out from domain and he don't see new server.when i power on old server the client computer work ok.i deinstalled the win me on this computer and i installed to him win xp pro but problem is same. this computer don't see new server and he don't see others client computers in network.
what i do?
i tryed to make new user account but nothing i can't because of this computer don't see new server.
on client computer light green indicator on network adapter (Realtek 8139d) all the time.
i use commands: ping with the ip address of server, with the name of server nothing, ipconfig /release, ipconfig /renew, ipconfig /flushdns, ipconfig /registerdns.

ip address of old server is 192.168.0.100 and new server 192.168.0.101.
maybe problem is when i type ipconfig in dosprompt on new server
i receive: DNS server 192.168.0.100 and DHCP 192.168.0.100

plz help me thanks
 

Read other answers
RELEVANCY SCORE 61.2

I've tried hosting a server for an indie computer game called Minecraft using the following .jar file
http://minecraft.net/download/minecr...=1284392596463
and while it works, I've been unable to allocate more than 1 gig of memory to the program.

Running the .jar file by itself leaves a very small amount of memory, which is tracked on the server window as "Memory use: # mb (% free)

The support forum for the game suggests using a .bat file with the following line:
"C:\Program Files (x86)\Java\jre6\bin\javaw.exe" -Xmx1024M -Xms1024M -jar minecraft_server.jar

This does increase the amount of memory, and while I should be able to increase the "1024" values to use even more, this is where I run into problems. Using "2048" or any other value in this .bat line produces an error stating:
"Unable to run virtual Java machine"

I've asked about this on the game's forum, and the only response I've gotten was from other Vista 64 bit users that have the same problem and are unable to solve it. Any thoughts?

Read other answers
RELEVANCY SCORE 60.8

Hi there,

I've worked for a long time with xampp on Windows and never had this problem.

I try to access PHPmyAdmin and this error message appears:
HTML:
#2002 - The server is not responding (or the local MySQL server's socket is not correctly configured)
Why?

Thanks
 

A:XAMPP - #2002 - The server is not responding (or the local MySQL server's socket is n

Read other 8 answers
RELEVANCY SCORE 60

OK,

we are running Windows SBS 2000. If i try to ftp to a website we have being hosted using a "client machine" (one on the internal network) I can't. I can get to see the contents of the ftp site but have no luck uploading my files to it. Although, if I use the server (running SBS 2000) itself I have no problems and can upload, delete, files, etc. Is there something I should be doing to make sure clients can ftp?

I have already created the packet filters on the ISA server computer, enabled the ftp access filter and created a protocol rule to allow the ftp protocol and still to no avail.

I have seen on the MS site that if the computer (client) is configured as a Web proxy client only, only FTP downloads are possible. How do I know if it is configured as web proxy client and then change this?

I have used the same ftp account details when doing the ftp on the server machine and on the client machine. need help quickly as very frustrating
 

Read other answers
RELEVANCY SCORE 58.8

I just installed windows 8.1 pro on an MSI z97 pc mate motherboard with I5 3.3 ghz processor, 16 gb ddr3 1600 MHz ram, with embedded realtek pcie gbe NIC. I checked and found that hardware virtualization is enabled by default in the BIOS.

I tried to set up a virtual switch using the latest bios and drivers from MSI. I created a virtual switch choosing the external option and the share with host OS option. I then connected to the VM. No network connectivity on VM but host still worked.

I then used autopatcher to update windows 8.1 on the vm. I removed and reinstalled the virtual switch choosing external option and share with host OS option. Same conditions occurred.
And then I installed the latest NIC driver. Same problem - media disconnected.

I tried this process with the latest driver from the realtek website which was a couple years more up to date. I had such high hopes! Same problem.

I then used msconfig to prevent all non-Microsoft services from starting and rebooted. I removed and recreated the switch and I was still hoping for success. Same exact conditions occurred.

These are the conditions that occur whenever an external switch with host os sharing enabled is installed in between all of these troubleshooting steps. It looks exactly the same every time...
The host machine can still access the network but it does so through the virtual switch. Ipconfig /all on the host reveals the following...
Microsoft Windows [Version 6.3.9600]
(c) 2013 M... Read more

Read other answers
RELEVANCY SCORE 58.8

I am still having ONE small issue. I got the additions installed, but it is still not allowing me to set up a shared folder between the virtual machine and the host system. It's saying "Not installed." Here, I'll give you a screenshot of the issue I'm getting.

A:Virtual PC 2007 - set up a shared folder between virtual machine and host?

Hi,

Start your virtual machine & install the additions pack under "Action"

Read other 3 answers
RELEVANCY SCORE 57.6

Hi there:

I have followed the instructions of installing mysql in tar.gz form

I am at the part of running it with

Starting the MySQL Database
# su -
# cd /usr/local/mysql
# bin/mysqld_safe --user=mysql &
Starting mysqld daemon with databases from /usr/local/mysql/data

It looks like the MySQL starts and then automatically end by itself.

The error message is :
"STOPPING server from pid file /var/run/mysqld/mysqld.pid
050119 16:00:47 mysqld ended"

I then go to check the contents of this mysql.pid and it does not exist when I cat. Actually the folder /var/run/mysqld/ does not even exist in /var/run/ .

Can you guys lend me some insight as to what went run in my install of mysql, in terms of newbie language for linux.

thanks a lot

PS I did run script as req for the grant files.
# su -
# cp mysql-standard-4.0.20-pc-linux-i686.tar.gz /usr/local
# cd /usr/local
# gunzip mysql-standard-4.0.20-pc-linux-i686.tar.gz
# tar xvf mysql-standard-4.0.20-pc-linux-i686.tar
# ln -s mysql-standard-4.0.20-pc-linux-i686 mysql
# cd mysql

# scripts/mysql_install_db --user=mysql
 

A:Trying to start up MySQL on Linux Machine in Fedora Core 3

Any responses to your post?

Hi...I've been encountering the same problem with MySQL...when I look at the logfile it says that it can't create/write mysqld.pid and then says can't find a host.frm file. (Sorry...I meant to write down the exact message, but I was in a hurry this morning and can't remember the path).
 

Read other 5 answers
RELEVANCY SCORE 57.6

I am trying to map a network drive to a remote server. The server is not on the same network as the computer I am trying to map the drive on.

I have the external IP address, the port number, and the drive letter on the server.  I have entered http:// IP Address:Port Number/drive letter.  I get an error message stating that the drive path is incorrect.

I am using the network drive mapping wizard in the Computer screen.

The remote server is part of a local network with 3 other computers running in the VMware workstation connected by NAT connection .I run this server port number 9000 of host machine  by Port forwarding method. 

I need help with the proper syntax for mapping the drive to the remote server.  I can't get my Windows 10 machine to connect to the server.  I need to get shared folder of virtual machine in another computer.

How do I map a drive to my remote server?  Please be specific as I am not that familiar with networking.

Thank you in advance for your help.

Read other answers
RELEVANCY SCORE 57.6

I am running a server in vmware workstation which is connected with NAT connection. I made port forwarding for access this virtual machine from outside the host computer. That is when type host computer ip:9000 in chrome it redirects to server web interface
which is running in vmware workstation because I redirect port 8080 in virtual machine to port 9000 in host machine.

 Now I want to get all shared folders in the virtual machine . when I typed host ip in run dialog box it gives only the host machine shared folders . when i typed host ip along with port number it shows error. 

What should I do for getting all shared folders of virtual machine in other computer in same network.

Note:Should not use bridge network connection.

Whether it is possible?.

Thank you for your help in Advance.

Read other answers
RELEVANCY SCORE 56.8

Can someone explain the difference between these 3 programs?

A:Remote desktop, Virtual Machine and Virtual Box

Hi Jason6161 Two of these words are closely related, while the other one isn't.Remote Desktop is often a reference to the "RDP" acronym, which means "Remote Desktop Protocol", a protocol used by Microsoft Windows systems to remotely connect to another Windows system (or even other OS now). There's a nice little article on Microsoft website about, I suggest you to give it a read. If there's something you don't understand in it, let me know and I'll explain it to you.Connect to another computer using Remote Desktop ConnectionA Virtual Machine is like the state name, a machine that doesn't exist physically, it only exists virtually inside a system. It's the emulation of a system inside another system. So you could for example have Windows 8.1 installed on your computer, but using a program, create a virtual machine running Windows XP in it. To put it simply, it's running an independant system (guest) inside a system (host). For more information, you can consult the Wikipedia article below.Virtual machineVirtualBox is a program developped and maintenant by Oracle that allows you to create virtual machines. It's what we call an "hypervisor". A program that allows you to create and manage virtual machines. For more information, you can consult their website and their Wikipedia article.VirtualBoxVirtualBox WikiSo to sum it up, you can use VirtualBox to create a virtual machine (or multiple VMs), and you use the "Remote Desktop" to connect remotely to another computer and access it. ... Read more

Read other 2 answers
RELEVANCY SCORE 56.8

I've got a few machines on Virtual PC, copies of one base installed template, all running XP Pro.

I moved one of these virtual machines to another box, and now that virtual machine cannot talk to any other virtual machine on the original box, or the original host itself.

Any ideas why this is?
 

Read other answers
RELEVANCY SCORE 56.4

I'm just reinstalling my test server here, and I've hit a minor snag. I've installed the latest apache with PHP5 and MySQL5. I'm trying to install phpMyAdmin 2.8.0.2 now, but it's having none of it.

The error I'm getting from phpmyadmin is




Cannot load mysqli extension. Please check your PHP configuration. - DocumentationClick to expand...

Obviously I've neglected something or screwed up somehow, but I'm at a loss as to where. Could anybody give me some manner of checklist for this issue, or simply the answer if it's obvious to you, because clearly, it's not so obvious to me

Edit: Oh god!. now it won't even load phpinfo. There's no error message, and I know php is working because phpmyadmin reports the error.

This is just nuts.
 

A:PHP/MySQL server help.

What OS are we talking about here? You are probably missing some PHP components. Like the mysql part of it. In Linux or such, you should look for a "php-mysql" or simlarly named package.
 

Read other 7 answers
RELEVANCY SCORE 56.4

Hi,
My first thread and I must explain that I would be considered a novice at computing.My problem is the message - MySQL Server cannot connect to .....(127.0.0.1) at server name(.....).
I have Googled for a solution but I am afraid the high tech answers do not really make any sense to me.One simple solution was to open task manager and see if the program was running.There was no MySQL program listed in the task manager.Is this the name of the program in the task manager?or does it go under another?
I would be very grateful for any help that a novice may be able to follow.
Regards,
Sassa

A:MySQL Server

SQL server is a Microsoft database program. Are you currently using SQL (Sequel)?

Read other 11 answers
RELEVANCY SCORE 56

Any known bugs or anything I should watch for if I run LAMP on a WIN2000 server or should I go with my heart and insist on using Linux server to host the companies corporate web portal. Even when the company uses only MS , my choice my butt on the line................
 

A:Mysql 5 on WIN 2000 server

Since it's a Windows box, you could get WAMP
 

Read other 3 answers
RELEVANCY SCORE 55.2

well i had it installed.
everything was perfect.
but recently i had to jump to a new administrator user.
and
my mysql service wont start.

i stopped all XAMPP service.
i unistalled all XAMPP service.
uninstalled mysql query browser using revo uninstaller.
restarted the pc.

but wont work.

i also tried different ports [3307/3308 etc .]. that also failed.

any idea how can i start the service?

A:mySQL server... wont start

Check event viewer, it should list something about MySQL.

zzz2496

Read other 3 answers
RELEVANCY SCORE 55.2

Ive installed MySQL DB, but trying to connect with odbc api.... via an excel presentation layer.

I have a mysql command prompt and was wondering how to figure out my database name, or what the default name should be.

i tried (but didnt work):

Server Name: localhost

username: root
password: ******

Thanks for any ideas.
 

A:Solved: How do I find MySQL server name?

Hi tjamnz,

You still have to create a database under MySql command prompt :

Syntax :
CREATE DATABASE yourDatabase

Then, to browse your database :

Syntax :
USE yourDatabase
 

Read other 3 answers
RELEVANCY SCORE 55.2

I've installed MySQL Server v. 5.5.28 64-bit won't install, saying A DLL required this install could not be run. A screenshot below:

Tried installing other versions, still came up with the same issue.

Read other answers
RELEVANCY SCORE 55.2

Logfile of Trend Micro HijackThis v2.0.2Scan saved at 2:33:21 PM, on 5/5/2009Platform: Windows Vista SP1 (WinNT 6.00.1905)MSIE: Internet Explorer v7.00 (7.00.6001.18226)Boot mode: NormalRunning processes:C:\Windows\system32\taskeng.exeC:\Windows\system32\Dwm.exeC:\Windows\Explorer.EXEC:\Program Files\ATI Technologies\ATI.ACE\Core-Static\MOM.exeC:\Windows\RtHDVCpl.exeC:\Program Files\HP\HP Software Update\hpwuSchd2.exeF:\Program Files\Adobe\Acrobat 8.0\Acrobat\Acrotray.exeC:\Program Files\iTunes\iTunesHelper.exeC:\Program Files\Java\jre6\bin\jusched.exeC:\Program Files\Common Files\Symantec Shared\ccApp.exeC:\Program Files\Winamp\winampa.exeC:\Program Files\Windows Sidebar\sidebar.exeC:\Program Files\Yahoo!\Messenger\YahooMessenger.exeC:\Program Files\AnVir Task Manager\AnVir.exeC:\Program Files\HP\Digital Imaging\bin\hpqtra08.exeC:\Program Files\ATI Technologies\ATI.ACE\Core-Static\CCC.exeC:\Program Files\HP\Digital Imaging\bin\hpqste08.exeC:\Program Files\HP\Digital Imaging\bin\hpqbam08.exeC:\Program Files\HP\Digital Imaging\bin\hpqgpc01.exeF:\Program Files\Adobe\Adobe Photoshop CS3\Photoshop.exeF:\Program Files\Adobe\Adobe Bridge CS3\Bridge.exeC:\Program Files\Internet Explorer\ieuser.exeC:\Program Files\Internet Explorer\iexplore.exeC:\Program Files\HP\Digital Imaging\Smart Web Printing\hpswp_clipbook.exeC:\Windows\system32\Macromed\Flash\FlashUtil10b.exeC:\Users\Mom\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\HJNF1ZO5\HiJackThis[1].exeR1 - HKCU\So... Read more

A:Driveby MySQL and FTP server installed

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.comDDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the resul... Read more

Read other 2 answers
RELEVANCY SCORE 55.2

hi,
i've installed mysql 4.0 into my win server 2k3 and it is automatically started whenever the computer boot up. it has the traffic icon on the task bar besides the clock but it is always in red colour. mysql won't work no matter how i tried to start it in mysql console center. does mysql actually works on win server 2k3? or do i need to enable any services to run mysql properly?
thanks in advanced

Tiffany
 

Read other answers
RELEVANCY SCORE 54.8

Exemple oracle vm virtuelbox dont let me install driver for graphic card like x1650 agp for windows xp and i cannot play to my game silverfall .

Seriousely witch virtuality program can let me play a game with xp or vista without driver problem ? Cause i have a game silverfall for xp or vista. My game are not compatible for windows 7 home .

Maybe somebody have solution with or without virtual box ,maybe better program for virtuel utility exist ?

Maybe you know how play silverfall on windows 7 home ?

How (or without virtual box) and if another virtual box exist for that ?

Thank for help .

A:Virtual graphic on machine virtual .

In Virtualbox's main screen, select your XP machine (do not start it). Click settings.On the left side, click System. On the Motherboard tab, set Base Memory to 1024. On the Acceleration tab, be sure that both boxes are checked. You may need to enter your computer's BIOS and enable its virtualization features.On the left side, click Display. On the Video tab, be sure that Enable 3D acceleration and Enable 2d video acceleration are checked. Click OK to save the changes.Start the XP virtual machine and let it finish booting. Above XP you'll see a menu bar. Click Devices > Install Guest Additions and follow the prompts.You will not be able to install your ATI drivers. Virtualbox is emulating its own set of hardware for Windows XP to use. My instructions will tell Virtualbox to give XP enough resources to run your game.As for the game itself, if it is on a CD, click Devices > CD/DVD Devices and make sure that your CD drive is selected.

Read other 4 answers
RELEVANCY SCORE 54.8

I'm currently building a intranet for a small company (under 15 users). I'm shopping for a server for it to live on-- probably running win2000. I would like to stay on the low end (under $1500) and buy something with some room for expansion. I generally buy white boxes w/o an OS. Could anyone give me a few tips on what I should look for as far as configuration? Do I need dual processors? A special NIC? How much RAM? Anything else I need to consider? Thanks in advance.
 

A:What's important in a web server running apache/php/mysql?

Apache and MySQL are really simple and you wont need much CPU. My opinion is you wont need more than a simple workstation.
Of course I prefer a real server. They are more reliable.
Compaq Proliant DL.. 320? 360? They are pretty cheap and you wont need more for a webserver with a MySQL database for 15 users.

Good Luck.
 

Read other 3 answers
RELEVANCY SCORE 54.8

Hi,

I have a server running linux with Apache and MySQL. now I am trying to create an ODBC link through my XP machine. I have installed the ODBC driver and everything.

i am trying to create a system DSN connector. At the stage where it asks me about servername password, user, etc... I just cant figure out what to type in server. Should it be the IP address or anything else behind it. Because when I used the IP it says

[MySQL][ODBC 3.51 Driver]#HY000Host '88-106-153-88.dynamic.dsl.as9105.com' is not allowed to connect to this MySQL server

any ideas? Thanks
 

A:Connecting through ODBC from Win XP to Linux MySQL Server

Well all I know about is MS SQL server and its on the domain but I usually use this type of method -

www.fontstuff.com/ebooks/free/fsLinkingToSQLServer.pdf

With linux I would think you should just need to type in the machine name.

Also with this setup is this all local or is this across the internet?
 

Read other 1 answers
RELEVANCY SCORE 54.8

Hi there. My first post.

I installed MySQL 5 on Vista 32-bit just now - it installed fine. The problem is that when I go to open the Server Instance Config Wizard the box is tiny and shows nothing that I can use to discern what is inside.

I tried positioning the cursor onto the side in a vain attempt to resize it - no success. Is there a way I can modify the settings so that I can actually see it?

Thanks in advance.

EDIT: I'm not sure if I posted in the wrong forum.
 

A:MySQL 5.0 Server Instance Config Wizard - cannot see anything

Hey there, welcome to TSG

I don't know if this is exactly the right forum or not; we don't get a slew of MySQL questions in Business Apps. If you feel like it isn't getting the attention it deserves, you can click on the yield icon in the first post's title bar and request it be moved somewhere more appropriate. The mods don't like it so much when we double-post, so they'll be happy to move it for you (and even pick the best forum).

Anyway. This seems similar to another MySQL/Vista thread I saw within the last month. Or maybe it only seems similar because there was another MySQL/Vista thread within the last month.

How have you verified the installation was successful? Can you get a version through command line? Can you start and stop the service? I don't know if Vista supports the same windowing hotkeys as XP, but have you tried typing Alt + Space to bring up the window's system menu in case it can be maximized, or typing F11 to enter Full Screen mode (not sure if that even exists on Vista)?

I know these are lame answers. I can't offer much help because I almost always configure MySQL through the command line.

chris.
 

Read other 1 answers
RELEVANCY SCORE 54.8

I have a question about Mysql server 2008 R2

What is my server name if I select to install with "Named Instance" not "Default Instance"

with Mixed mode password



I don't know this because I used to install with Named Instance : neneka and mixed mode password 12345

but I can't login because I don't know what my server name is

user id should be : neneka right ? and maybe password is 12345

A:Question about installing Mysql server 2008 R2

When using named instances, the server name is of the form [ComputerName]\[InstanceName]
When using the default instance, it's only [ComputerName]

You can alternatively replace the computer name with the IP or "localhost" if it's on the very same box. And on the login dialog, if you open the server name combobox, the option "browse for more" can be used to help you locate the servers in the network too.
Also verify if the server service is running. For named instances to connect over a network, you also need the SQL Browser service running (not needed for the default instance).

BTW, you should rename the post to SQL Server, as it has nothing to do with MySql.

Read other 4 answers
RELEVANCY SCORE 54.4

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 54

I've installed MySQL onto Windows Vista home with no problems. However, when I go to configure an instance using the wizard, I get this odd error I've never seen before: "This application has failed to start because its side-by-side configuration is incorrect. Please see the application even log for more detail."

The event viewer shows the following:

Activation context generation failed for "C:\Program Files\MySQL\MySQL Server 5.0\bin\MySQLInstanceConfig.exe".Error in manifest or policy file "C:\Program Files\MySQL\MySQL Server 5.0\bin\MySQLInstanceConfig.exe" on line 6. The value "asAdministrator" of attribute "level" in element "urn:schemas-microsoft-com:asm.v1^requestedPrivileges" is invalid.

I've tried running the file as administrator (right click for that option) and that was of no use either.

I have no darn clue what is going on at this point and searching across the internet has not produced any better luck either. Please help!
 

A:MySQL Server Instance Config Wizard...Error

Read other 8 answers
RELEVANCY SCORE 54

I have PHP installed running with apache, I did it manually which I prefer because I can then create virtual hosts.

I have http://lostseed, http://jream, and http://velocity

I am having a very hard time getting MySQL to work.
All I want to do is have a MySQL database for each of these Virtual Hosts.
It doesnt matter If I use PHPmyAdmin or anything, I still cant get that to work
either

Ive read manuals and things and I cant figure out what Im doing wrong.

My virtual hosts are setup in system32/drivers/etc/hosts

Code:

127.0.0.1 localhost
127.0.0.1 jream
127.0.0.1 lostseed
127.0.0.1 velocitytools
127.0.0.1 test
To set those up I have this in my httpd.conf file for each one:

Code:
#For jream:
NameVirtualHost jream

<VirtualHost jream>
DocumentRoot d:\jream
ServerName jream
</VirtualHost>

<Directory "d:\jream">
Options all
AllowOverride all
Order allow,deny
Allow from all
</Directory>
is there an easier way to do this? I tried using WAMP with aliases but
it does not show the css or image files when running because everything
is linked /css/ and /images/ -- if you click a link in the aliased directory
it would go http://css/, its stupid

please help Im going nuts
 

A:Apache HTTP Server Works w/PHP, how to work MySQL?

You should really use an IP address or Wildcard for the NameVirtualHost

You need to setup a VirtualHost Entry for each website and the Directory Directive needs to be inside the VirtualHost Directive.

Try not to start multiple threads with the same problem. Try and keep it all in one thread.
 

Read other 1 answers
RELEVANCY SCORE 53.6

Hi there,

On Linux, we can easily enable remote access to MySQL server, but on Windows, I got no success so far ( a client tried to connect to MySQL on the server)

Here's the steps to do that (on the server computer):

1. Open a DOS command prompt on the server.
2. Run the following command from the mysql\bin directory:
mysql -u root --password=
3. A mysql> prompt should be displayed.
4. To create a remote user account with root privileges, run the following commands:
GRANT ALL PRIVILEGES ON *.* TO 'USERNAME'@'IP' IDENTIFIED BY 'PASSWORD';

'USERNAME' is the username to be created.
'IP' is the public IP address of the remote connection.
'PASSWORD' is the password to be assigned for this username.
(IP can be replaced with % to allow this user to logon from any host or IP)

mysql> FLUSH PRIVILEGES;
mysql> exit;

So it is. But I couldn't connect to that MySQL from another computer, both are Windows XP.

If you have any experience, I'd like to receive your help.

Thanks in advance.
 

A:Solved: How to enable remote access to MySQL server on Windows XP

Oh, I got it. It's due to my Windows Firewall. Just turn off it (unsecured) or add MySQL port (e.g. 3306) to the WFirewal's exception.

Have fun!
 

Read other 1 answers
RELEVANCY SCORE 53.2

Hi,

I am having an issue with offline files created offline syncing back to the server. I have set up a network share to be available offline on a client computer. All files are available offline without issue. Here is the issue however. If I set the folder to work offline any file I create in the folder when it is offline just disappears when the folder comes back online, there are no conflicts or sync failures reported in sync center. If I create a new folder offline the folder does sync back to the server. Any changes made to an existing file are also replicated back to the server once the share is back online. So the issue is only with newly created files when the share is offline. I have not been able to replicate this error on any other file server in our environment, However I have recreated the issue with multiple shares with multiple Win 7 clients on this file server.

Steps taken so far.

Checked and reset permission levels on the share.
Recreated new shares from scratch for testing.
Disabled and enabled offline files on the client computer and cleared the offline cache.
Check various registry entry settings.
Disabled cashing on the File server.
Tested with XP the issue does not exist with XP.

I have spent hours researching this error online to no avail.

The clients are running Windows 7 Enterprise 64 bit
The File server is Server 2003 Standard 32 bit with SP2

Any help or ideas would be most welcome.

A:Offline Folder sync issue, Win 7 Client Server 2003 Flie Server.

I've seen the complaints about this problem but with no clear resolution. There are some hot fixes listed that may help, updating to Windows 7 SP1 is supposed to help in some cases but nothing seems for certain.

No way for me to recreate this problem but apparently others have the same problem.

Offline created files disappear after re-connect

Browse by Tags - The troubleshooters and problem solvers... - Site Home - TechNet Blogs

Administratively assigned offline files on Win7 client disappear from server (Network Steve Forum)

The Group Policy settings in the next link may have an effect on this problem.

http://mcpmag.com/articles/2003/11/0...ine-files.aspx

Read other 3 answers
RELEVANCY SCORE 53.2

There is a process running on my computer called csrss.exe
 
I went to http://www.processlibrary.com and looked it up and came up with 2 different things. One says it is a Trojan and needs to be removed. The same exact process name also says it is Microsoft client server runtime server and SHOULD NOT be removed.
 
How I am supposed to tell the difference so I do not make a mistake by either leaving it alone or removing it???

A:Process: csrss.exe (trojan or Microsoft Client Server Runtime Server?)

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/561994 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

Read other 2 answers
RELEVANCY SCORE 53.2

Hello everyone,

I am hoping someone may be able to help me with the following. I tried to use VMware's free "converter" software to convert my physical HP machine to a virtual machine. However, when trying to run the virtual machine, it says that the virtual machine has two processors & that it is limited to only using one processor, & therefore, will not start. The physical machine is a dual core processor, but I see no way to configure the virtual machine so that it only has one processor.

It seems to me the software should just configure itself to at least run, and from there a person can try to tweak the settings and be advised if there are limitations at that point, but that would make to much sense. Alternatively, they could provide an easy way to change the settings so you can at least get the thing to run, but again, that would make to much sense.

Anyway, if anyone can help me get the virtual machine clone running, please let me know.

Thanks
John
 

A:Using VMware "converter" to convert a physical machine to a virtual machine

Read other 7 answers
RELEVANCY SCORE 52.4

Hi I'm working on a client/server with the Java programming language and trying to figure out how to protect my server. With my current Virus/Firewall protection suite theres nothing I can do to keep out unwanted Java applications on the port I choose to allow the Java SE Binary through for clients accessing the server application. ESET Smart Security 4 is what I am using. Does anybody know of a security suite that would allow only a specific Java application to get through the firewall? I'm not to sure on this subject because my firewall is identifying any Java application as only the "Java SE Binary" and not I'm sure if you can even really name your Java application like you would something you would write in C++. Any information would be appreciated, thank you.
 

A:Java Server/Client + Server Firewall Safety

Read other 6 answers
RELEVANCY SCORE 52.4

A friend is moving his business, and the new business park that he's setting up shop in does not have anyway to get any wired internet to his building, excluding a T1 line, which he can't justify the cost of.

One windows 7 machine acts as the server, primarily for Quickbooks database, and there are two other windows 7 machines that are clients, reading off said database.

He's getting one of those usb dongles for wireless internet service, for the server only (the other two computers will be tethered to a smartphone for internet for QB and windows updates periodically).

They do NOT want to share the servers wireless connection to the other machines.

My only concern was if the server will continue to try to check the LAN for internet connectivity, or will it check both network connections when one fails, or is there a setting I can tell them to change to ensure it knows to go to the wireless dongle for internet all the time, without interfering with the workstations talking to the server over the LAN to get to the database?

The setup at the old office was business class DSL, they are using a relatively new Linksys router, which had the DSL authentication information.

Thank you!

A:LAN network for server/client only, USB hotspot for server internet.

I managed to find a solution this morning, for anyone that's interested, the whole article is here: Multiple Network Connections at the Same Time on Windows | Ivan Zlatev

But the short answer is, under the advanced properties of TCP/IP v4, uncheck automatic metric, set your internet to a value of 1, and the LAN to a value of 9999.

Read other 1 answers
RELEVANCY SCORE 52.4

was trying to network my computer to the server but keep getting the message 'server not responding from client computer' can anyone help please.
 

Read other answers