Having upgraded my desktop PC to Office 2010, I need to import three seperate letter template files for use in Word. These were lost during the upgrade but are on my laptop, which still runs Office 2003, as .dot type files and I also have them copied to a memory stick. However, I am at a loss as to how and where to save them into the new programme on my desktop PC. If it makes a difference, I should add that I do not use Libraries and have disabled them.
Can anyone advise please?
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)
Problem solved - with a bit of advice from a friend! Unsurprisingly, it's very simple.
- Open the document in Word
- Click "Save As"
- Scroll to top of folder list and, under "Microsoft Word", click "Templates"
- Name the template and select "Word Template" in the "Save As Type" list
- Save it
I still don't know where they are saved to but I can now call them up and use them.
We are wanting to up-grade our current Office suite Office 2003 to either Office 2010 or Office 2013. Our PC's are running Windows 7
I would just like to know what peoples opinions and advice is on this?
I can't speak to Office 2013, but I've done numerous upgrades to Office through 2010. When you install the new version, you have the option to keep the old version or just replace it. Starting with Office 2007 the familiar menu bar has been replaced with the ribbons which take a lot of getting used to for folks used to older versions. There's a little program called UbitMenu that will add most of the menu bar functions back in the 2007 and 2010 versions that a lot of folks find helpful. If you do opt to have two different versions installed at the same time, what happens is that when you switch from one to the other, it goes through a juggling act that takes a minute or so. It's a bit of a pain, but if you need it, it could be a convenience.
I'm running Windows 7 on my new computer, which came with a trial version of Office 2010. Rather than buy the full version when the trial expired, I installed the Office 2003 I had on my old -- now dead -- computer. I now find that I can't open the Word and Excel files I created with the 2010 version. Is there a 'cloud' site where I could send the 2010 files and have them returned to me as standard .xls and .doc files? Or is there a free converter available for download?
Read other 7 answers
I did an upgrade installation from Office 2003 PRO to Office 2010 PRO. I had several issues with Access denied on C:\Config.msi. I usually select retry and all is well. I think I may have missed one of the retries before I did the system restart.
Now I get an error 2203 whenever I reboot, and the Office 2003 installer keeps popping up anytime I try to do anything.
I tried uninstalling Office 2003 and was told that I had a corrupted install. I tried re-installing it and it seems to just hang.
I also tried to uninstall and repair Office 2010.
I'm at a loss at this point.
Do a restore point to before you installed office 2010. then uninstall the office 2003 and do not upgrade.Read other 3 answers
My PC OS is Windows 7 Pro and I am using Office 2003
I want to install Office 2010 on it.
I don't want two Office programs but I do want to keep My Doc's etc in the new Office 2010.
What is the procedure?
Hi fred93 The documents you created with Office programs aren't related to it. You can simply uninstall Microsoft Office 2003, and install Office 2010 and you'll be able to use them again. Simple as that.Read other 7 answers
Hey guys, my wife is taking a course that requires her to install Office 2010. The issue is that she wants to preserve her current setup which includes Office 2003 and 2007 existing side-by-side on her Windows 7 (64-bit Home Edition) notebook.
The 2003/2007 setup is not one that she really wants to mess with (i.e., she has no interest whatsoever in uninstalling the two Office suites that she currently has), so ideally she would like to have Office 2010 installed temporarily (for the duration of her course) on the machine without interfering with the current setup.
What is the most painless way of doing this that does not involve shelling out for a second computer?
Hi, welcome to the forum,
I had a similar situation here but in the end I opted out.
I removed both Office 2003 and 2007 and installed 2010, I then used virtual XP and installed 2003 there, 2007 and 2010 are too similar and the dll's will 'bite' along the way.
Even my 2003 and 2007 gave me issues after some time.
Have you checekd what the Microsoft Support site says?
Hi, all. I hope you can help me.
1. I was previously working on a 32-bit Compaq computer that ran Windows XP, and I used Microsoft Office Student and Teacher Edition 2003 for my work.
2. I bought a new computer, a 64-bit Dell running Windows 7 Professional, which came equipped with Microsoft Office Home and Business 2010.
3. Because I prefer the MS Word program on Office 2003 to 2010, I installed that on my new computer with the proper keycode. (During setup, I chose only to install the old Word 2003 -- not the old Outlook, Excel or Powerpoint programs.)
4. Installation was successful. The Office 2010 files reside in the Programs directory; the Office 2003 files reside in the Programs (x86) directory.
5. I then instructed Windows 7 to open .doc and .docx files with the 2003 Office Word program.
6. The problem is: Whenever I choose Word 2003 from the Program menu (or click on an actual doc file), I receive the msinstall message, "Please wait while Windows configures Microsoft Office Standard Edition" for about ten seconds. Then Word 2003 opens. I checked the Windows Event Viewer, which indicates that during this hang, either Word 2003 or Word 2010 is apparently looking for components it can't find.
7. Curiously, if I navigate directly to the Office 2003 folder (called OFFICE 11) and double-click directly on the Winword.exe file, Word comes up immediately. It's only when I double-click on an actual file (or invoke Word 2003 from ... Read more
When you switch between an Office 2010 program and an older Office program, it goes through that configuring process. I read somewhere that this is because each version of Office has entries in the registry with the same names but are set differently so it has to go through this little gooney bird dance. If it's the ribbons (and lack of the menu bar) you don't like in Office 2010, there's a neat little program called Ubitmenu you can download and install that gives you an old style menu bar with most of the Office 2003 features on it.
I use now MSOffice 2003 but want to upgrade to the Student version 2010 which comes without Access.
Does the Access from MS Office 2003 work in tandem with MSOffice 2010?
Some information on this in the following links:
Information about how to use Office 2010 suites and programs on a computer that is running another version of Office
Keep earlier versions of Office programs when installing Office 2010 - Excel - Office.com
I need to have Office 2003 and Office 2010 installed on the same computer. They won't be running at the same time, but both will be used occassionally so both of them must be installed.
I read somewhere that this is not officially supported but possible.
What's the proper way of doing so? Do I install the Office 2003 first and then 2010?
Is there a way to prevent the setup from running each time I'm switching between the versions? It takes up a lot of time and I think it's unneccessarry.
I want to set Office 2003 as default and I want Office 2010 to start ONLY if I start it manually or I choose to open a file only supported by the new version (like docx etc)
See if this Microsoft article helps:
Keep earlier versions of Office programs when installing Office 2010 - Excel - Office.com
I have a Windows 7 Ultimate 64 bit on a Dell Studio 17. It came with Office 2007 trial which was a bad experience.
I have a MS Basic Office 2003 license and want the best legal way to upgrade at minimum cost.
In the end I need a license for 2010.
1) via Dell
2) via MS
3) box store
4) on line store amazon ?
I would say, BOX Store, and get only what you need. If Word, Excel, PowerPoint and Onenotes is fine, then get the Home and student. This comes with a license for three (3) machines, for less than $150.00 US.
But if you need Outlook, then you will have to get the Pro version or better.
I have been running Office 2003 since it first came out and continue to run it on virtually all my computers. I have one recently purchased computer with Win7 and thought I would try Office 2010. Aside from the amazingly awkward interface and organization of things, I have noticed:
far more problems with corrupted files in Office2010 than in Office2003
Further, when I send documents via email between computers I find that some .docx files arrive as .dat files. Does not ever happen when files are simply move across the network
xls files created in xl2003 run much faster in their native environment than when translated into xl2010 and run in that environment (benchmarks on the two computers suggest that they are about = re performance)
Has anyone had similar problems
Read other 6 answers
I bought the 3x family pack for office 2010 but not sure how to install is it just an upgrade or a new install and do I need to uninstall office 2003 first Thank you for any help.
Tech Support Guy System Info Utility version 220.127.116.11
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3999 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1807 Mb
Hard Drives: C: Total - 292841 MB, Free - 199633 MB; D: Total - 12398 MB, Free - 1960 MB;
Motherboard: Hewlett-Packard, 3612, 09.67, 2CE9367L31
Antivirus: Shaw Secure 9.01, Updated and Enabled
There's no upgrade license for Office 2010. It should install just fine over whatever version you have, and it will install just fine on a computer without any previous version installed.
Just bought a new laptop with Windows7 64bit installed-my first exposure to Windows7. I had Office 2007 installed on my old Dell 32 bit machine. I had also recently pruchased Office 2010 and installed that on my new machine.
Now, when I try to open those 32bit 2007 files with 64bt 2011, Iget an error message that "no picture file is available", or words to that effect. When I try to "open with", the only option displayed is "Microsoft Office" with an icon that looks like a picture file. When I try to browse to the proper office program(Excel, for example), there are none of teh Office suite programs displayed, only "Microsoft Office".
I can navigate seperately to the proper progran, Excel, etc., and drag the file into the application, and it opens, and all seems to work OK. I "save as" the proper application file, but it still will not open with double-click on the file name.
I have not seen this particular item in the forums and would appreciate very much some help in fixing this issue.
Hello Grubby76, welcome to the forum.
We have an excellent Window 7 File Association Tutorial here:
Open With - Change Default Program
According to the site below and a few others, the template folder is at
BET: Microsoft Word Templates - Normal.dot
C:\Documents and Settings\"user name"\Application Data\Microsoft\Templates\
I'm using Windows 7 64 bit and there is no Document and Settings Folder in Windows 7.
I can't find a Templates Folder in App Data either.
Please help, thanks.
"C:\Users\username\AppData\Roaming\Microsoft\Templates\Normal.dotm"Read other 2 answers
I just picked up an Acer Iconia Tab W500 series tablet pc
It has Microsoft Office Starter 2010 and I'd like to create a Word template without upsetting the default template or any others
Can you help me figure out how to do that?
I found a link to work on what I'd like to work with
Learn about templates in Office 2010
Recently installed Office 2010 (32 bit becuz it was recommended to do so my MS) and now when I send an Office 2007 file to that PC (both PCs are Win 7 64 it) it tries to open the file in Windows Media!!
What the heck am I doing wrong? I'm beginning to think I should not have purchased Office 2010 Pro and stayed with the Office 2007 on all my machines.
Any help would be greatly appreciated.
That is weird.
Could you please describe step by step how you are sending the file to another PC.
Also, please provide more details on what type of the file that is. And if you create a similar file on recipient PC, will it be opened in Windows Media as well?
I now have a new problem, before I managed to open 2007 files by opening Office 2010 and then from inside the application choosing to open a file. The problem I have though is if I just try to open an Office 2007 file then I can't open it, and I can't change the default program to open it.
How do you get Office 2010 to open all the Office 2007 files such as word, excel etc?
please don't cross postRead other 8 answers
I have many files (Word, Excel, and others) that were created in Office XP Professional 2002. Will I experience any trouble in continuing to use these files in Office Home & Business 2010? That is, reading them and/or modifying them?
No you won't have any problems, all previous versions of documents are compatible in newer versions of office.
I've often used the Files and Transfer Wizard to move files in the Windows XP environment, including those for people moving from Office 2003 to 2007, however, I've just been asked to move a person from a computer that would result in them moving backwards from Office 2007 to Office 2003; is this possible? What concerns should be considered? Obviously if they have a number of documents saved in the 2007 it could be problematic, though could the compatibility pack offered by Microsoft offset that concern? Thoughts? Thanks.
HI guys I need to create a template of our letterhead in office
why do we need to do this?
This is so we can create a PDF invoice or general letter and email it. We are using Flash paper to convert files to PDF
We have 2 letterheaded papers, 1 is the mane letter head and the other is a continuation sheet.
What I want is to create a template in office 2003, when using this temaplet if I write an invoice and go past the first page. Office automatically adds the second page "continuation letter head" and continue to do so for as many pages I add.
So basically the first page should be the Letterhead and every page after should be the continuation sheet.
The letter head and the continuation sheet look very similar except the continuation sheet does not repeat our address phone numbers and so on.
Can you please help.
Please email me at [email protected]
Read other 11 answers
Here is my issue. The Company we consult for has not transitioned all of the way to Office 2007. We have a number of machines that still have Office 2003. Compatibility Pack works on almost all issues.
Current issue is one of our users received a PowerPoint 2003 that has embedded PowerPoint 2007 files. When the user opens the PowerPoint 2007 file Office 2003 shuts down. He has to download the 2007 file to his desktop.
From what I can see this is because the file conversion process shuts down Office 2003 before attempting to open the PowerPoint 2007 file.
Another issue that may be complicating the error is we had to run a Fixit patch from Microsoft that was causing Excel, Word and PowerPoint to be scanned which caused long opening times. I don't remember the KB article for that one at the moment but will find it if I need to.
Thanks for any help in advance.
I am running Office 2003 on Windows 7. My PC is only 6 months old and everything has been running like butter. All of a sudden Office files open slowly when double-clicked from their respective locations (they would normally blink up). If I open Word or Excel and then open the files from there, they open quick. Outlook on the other hand, is just slow to load up...which it wasn't before.
I did a ton of research online and couldn't get a clear fix. My thoughts are:
Anti Virus? (I'm using AVG Free)
Ad-Aware Free? (Ad-Watch live is on...however it was on before)
Windows update or office update?
But obviously I'm here to get your thoughts. It's a pain in the ass when I bought a new PC so it could perform quick, and now spreadsheets and email take 20 seconds or more to open.
I just wanted to add that when I disconnect the PC from the internet, the problem seems to go away?Read other 12 answers
It is possible to open a Word 2003/Excel 2003 document in Word 2007/Excel 2007. But some time we have to work with Word 2007/Excel 2007 files at a PC where Office 2003 is installed. Can it be possible?
Microsoft Office Compatibility Pack
i am newbie on working on outlook and webmail..
i just wondering on how can i imports contacts from my ms office outlook 2003 into ms office outlook 2010.
any helps is greatly appreciated..
Here is an article that fully explains the process involved with step by step instruction: http://office.microsoft.com/en-us/o...t-has-outlook-2010-installed-HA102544948.aspx
I need to import contacts from Excel into Outlook Contacts 2003. When I name the range in the Excel worksheet then close the workbook I open Outlook Contacts then click import from Excel. I then locate the workbook and find the named range of contacts. I then proceed to import them after mapping. However when I then search the Outlook Contacts folder I cannot find any of the new contacts.
Any suggestions please?
Please post a sample XLS file without personalised data
About 6 months ago I backup office outlook 2003, now I want to import those file to my current office outlook 2003 without over writing the mail files I have now. How do I do that? So other words the new and the old files together as one.
This is how I back my files up
I export the registry settings from my current Outlook profiles subkey in HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem\Profiles
And copy the following folders from your current user profile directories. (this assumes your PST files are in the default Microsoft locations).
%userprofile%\Application Data\Microsoft\Outlook and %userprofile%\Local Settings\Application Data\Microsoft\Outlook to the equivalent directories for your user on the new machine. Import the registry file on the new machine. Install (if necessary) and I launch Outlook on the new machine and I was good to go.
When you Import a PST file, it gives you the choice of how you want to treat duplicate documents.
Alternatively you could just open the OLD pst file as another additional personal folder.
Hello. I have some .xls files on a cd which I could open fine until yesterday. The files were created on my Acer Aspire 5732Z (Microsoft Windows 7 Home Premium system x64 - based pc) using Microsoft Office Excel 97-2003.
Yesterday, I opened the cd on a different laptop (Acer Aspire 5733 64 bit operating system - windows 7 home premium, service pack 1). This laptop opened the files using Microsoft Excel starter 2010. I saved the files back to my cd when I'd finished, then safely ejected the CD using the correct method.
Now when I insert the CD into either pc, it show the CD drive but there are no visible files, so I can't open anything. I tried the error checking tool, but it can't check for errors as it says "windows cannot access the disk".
Can anyone help me open the files please? I have all the files backed up elsewhere, except for the two I worked on yesterday, but I really don't want to have to type them up again unless I absolutely have to as it will take me many hours. Any help would really be appreciated. Thanks in advance!
Read other 6 answers
I have a windows xp computer. which of the above is better to use. I dont use either in a professional manner bt unsure of which one to install on my comuter I have discs for both.
Either is fine, but a lot changed between 2003 and 2007 so if you're not familiar with 2010 there's a learning curve to it. I generally think that going with the more recent version is better because it keeps you up to date with the current technology. You don't use it professionally now, but someday you might, and it would be good to already know it. Just my two cents.
Hi, currently installed on my machine is Office 2010. I want install Access 2003 because I'm going to be doing a course which requires 2003. 2010 is not backward compatible to 2003!
Now I've done a duel install on my Toshiba Satellite (32bit) and they seem to have cozied up together very well. However on my main machine (64bit system) as soon as I put the 2010 Office on it seemed to have kick 2003 three out of bed
I'm assuming it’s a dust up between the 32bt system and the 64bit??????
I could do the course on the lappy but I prefer 32inch screen to 17 any day!
Access 2003 is not installed at the moment but I'm thinking should I install it to another directory "Programme Files" for win 7U or X86?
But on checking out dir's it seems that "office12/14 are in Prog files and there is "office 12" in X86 not sure if that is left over bits from when 2003 was previously Installed.
How do I get both to work on my 64bit system like they do on my 32bit system?????
Thank you for reading
This is what you need, I guess.
As to our other question, uninstalling Office rarely removes the corresponding Office12 (or whatever version number) folder from ProgramFiles, so I guess that's where it's coming from.
Which version is your Office 2010? If 32 bit, then the fact that your OS is 54 bit would make no difference.
Is it possible to have both Office 2003 and 2010 installed on the same computer? (I have licenses for both of them. Some family members prefer the old one, some prefer the new one. That's why.)
If so what are the exact steps to do it? I tried it but 2003 didn't open anymore (it showed error messages)
Also I read updates are not going to work anymore if I do this. Are there any more updates being released for the 2003 edition?
The computer is running Windows 7 Ultimate x86 so it's an x86-only Office (I know it's not possible to mix x86-x64 Office versions but it lets me install 2010 without upgrading the older one)
Also I want to set and keep the older Office as the default handler for all filetypes it supports. How do I do that? 2010 is keep overriding it.
I had both editions of Office 2003 and 2010 installed on my laptop but they did not work so well together
as 2010 was a trial version I just deleted it. So I am not sure if it possible or not maybe other members might be able to shed some light .
I would like to upgrade from Office 2003 to Office 2010 on my (now ancient) desktop that has Windows XP. I did find this regarding system requirements:
I know that my hard disk has the required space and pretty sure my RAM is capable. what I'm not sure of is the display thing and "computer and processor". Can someone tell me where I look to see if my machine is compatible with this upgrade for these two things? Or if anyone knows of any issues doing this, please chime in.
thanks so much!!
If you Publish a Snapshot using Speccy, we can take an in-depth look at your computer's hardware and provide more info. I would bet your computer can run Office 2010, it's just a matter of how slow it will be (depending on the age and speed of your hardware).Read other 5 answers
I installed a trial for Microsoft office 2010 when I was working on some college work to see if it would be worth upgrading. I have microsoft office 2003 already on my laptop. When the trial finished I unistalled the 2010 version but now when i try to open documents from e-mails it wont open up in the 2003 version. I have to then open up e.g word and find the file from there. Any ideas how i can change the settings to make Microsoft office 2003 the default for my documents.
Read other 7 answers
I have windows 7 ultimate and I install both office 2003 and 2010 but they cannot work togther. For example if word 2003 is the defalted, when I open word 2010, it is installed agian and become the defalted. Now when I open word 2003, it is installed again.
I want office 2003 to be the deflated and I can open the document with office 2010.
I installed the two programs in different folders
This is normal when two or more versions of Office is installed.
You are going to have to live with this constant installing each time you change versions, or get yourself another machine or install some virtual OS.
Since support is about to end for 2003 version, I think that it may be time to change. If I go to either 2007 or 2010 version, I think that I understand that "opening and reading" an "XLS" file will not be any problem since you can use the
Compatibility Pack". I am not so sure about the templates ( XLT ) files. Will I be able to continue those files, because I use them on a daily basis. Will an XLT file open and be able to be used in either 2007 or 2010 ?
XLS files can still be opened. Supposedly it is possible that some things might appear a little different when opening them with newer versions, but I've never found this to be true. And while I can't tell you for sure, I'm 98% sure XLT files will open just fine too. Basically you can open old format files in newer versions of Office, but you can't open newer format files with older Office versions.Read other 3 answers
Is it possible to install the 3 different version of Microsoft Office within the same PC? If so, in which sequence? ascending or decending order?
In short, NO, not without a bit of hassle at least.
But why would you like to do so in the first place if I may ask?
I installed the Office 2010 software on my windows 7 64-bit laptop however now it doesn't open any of my Office files that are from 97-2003? It opens 2007, but nothing before do you know why? Your help would be appreciated. Thanks in advance.
Try this: Overview - Batch DOC and DOCX Converter - Doc to Docx and Docx to Doc Batch Converter. - Batchwork? SoftwareRead other 6 answers
Installed MSO 2010 Beta, separately from my MSO 2003 (alongside 2003) found 2010 a little too difficult to configure/use(that ribbon thing), so I uninstalled it. It appeared to go ok, but upon my using 2003, everything is bolded now (appears unread) and clicking on an email, doesnt mark an email "read" when I click on it. Doesnt change if I "Mark All Read" either.
Anyone have anything similar? Cant mark emails read?
Just uninstall office 2003 and reinstall it. You could try a repair, but it might not work.Read other 1 answers
My company recently installed Windows 7 and Office 2010. Every time I try to open a excel file, via a link on our Intranet it asks for credentials.
I ruled out IE, firewall, and the document. I narrowed it down to something in Excel except i can't find it. Its like a security setting.
I was able to open the file when I had Office XP installed but as soon as i installed Office 2010 it won't work.
I've gone into the Trust Center and change settings but nothing seems to help. A pervious answer was given (http://www.sevenforums.com/microsoft...cs-2010-a.html) but it didn't work.
Does this happen with just one specific Workbook?Read other 5 answers
What's the difference between the 3? Or is there any difference? I was thinking about upgrading down the road sometime but not sure I will.
Currently I'm very happy with my Office 2003. It works well for me.
There is a bit of information here:
I don't know if maybe I'm the only one who runs into this problem or if it happens to a lot of people, but it seems to come up a lot for me.
I have had this issue on many computers but right now I am setting up an old Dell Latitude E5510 for an employee and I have reformatted, installed all drivers, and programs needed. I installed Office 2007, because this employee won't really be using the computer much.
I start up Windows Updates today and it has me downloading 3 updates for Windows 2010. This computer had Office 2010 on it before it was reformatted. Is it still sensing Office 2010 buried somewhere in the files and that's why it's asking me to install updates for it? Does Office 2007 use updates that are also made for 2010(and are only labled 2010)? Anyone have any ideas? I don't believe it's hurting anything, but I am curious!
I get those type of updates for my Office 2003. There are some later updates that can be applicable. For example, I installed a converter that lets me open later MSWord formats (2003 is doc) and now I get updates for later Office versions.Read other 2 answers
It seems that there may be a problem in Office 2010. I just installed it to the standard MS default/recommended settings .........all looked good...used Word great..until I use Excel and each time I try to use excel it sets off an 'Office Configuration' screen which I can not stop..it take a few minutes and then loads OK. I tried to launch it from the installed prgrams icon but there is no files on 'start in' etc..I tied to create a shortcut to the desktop from the excel.exe file and get the same reconfigure issue..it seem that somehow I don't have either permissions or I have a corrupt install..all Office suite works eventually Anyone know how to fix it..please?
Have you ever had a previous version of Office on this copy of win7?
Do you have any component of a previous office suite installed still
I have seen this in the past with Viso that was due to remnents of an earlier trial remaining on disk and in the registry.
I also found that if I cancelled the configuration screen the Viso would load without problems without the need to wait for completion.
There are some rather involved solution stems on Microsoft website - cannot find them at the present but will try to look for them.
The problem was that I could never get the removal steps to actually cure the issue and I put up with the error until my next re-install of Win7, which was not to long in the case of that system
Where I work we use multiple versions of Office (XP, 2003 & 2007) later next month our organisation is rolling Microsoft Office 2010 out system wide.
What I really wanted to ask is, has anybody come across a sort of conversion guide from say Office 2003 to Office 2010 so people who have been using 2003 etc. and have very little experience with other newer versions of Office can find out where all the functions (the basics even) are located in 2010?
2007 to 2010 isn't a big jump but 2003 to 2010 is and that's mainly what we have been using.
Let me know if you have as I've been looking on Google today but have yet to find anything good enough that I can use.
EDIT: As luck would have it, I may have stumbled upon something I can use, still open to others though
Maybe this will help:
Free MSOffice 2007 Training/Reference Manuals
Although its specific to Office 2007, Office 2010 isn't that different and I think its still pertinent.
Attached are some 2010 quick reference guides from the same site. I found them useful when making the transition.
i have installed office 2010 and in excel i need to save files in wk4 file formate .. and excel 2010 is lacking this feature. whereas excell 2003 has this feature.
can i install excell 2003 alongside office 2010 ?
i need word/outlook/access/onenote/ in 2010 format . whereas excel in 2003.
what are its implications?
Are you aware that Microsoft will no longer support Office 2003 after April 8, 2014. So you will lose support & updates on Excel 2003, which could make it very vulnerable to virus attacks etc..
Is the wk4 file format used in saving Lotus 123 spreadsheets?. With the above in mind is there any way, you can change over to the fully Excel system, as it would seem you are getting forced into a corner & have to eventually change over.
Whether Excel 2003 will work alongside Office 2010 is something I don't know.
since I installed SP1 for Office 2010 I have problems with opening some (not all!) older Word documents created with Word 2003 (*.doc). I get a message that Word can't read the document and it is probably corrupt.
On a other client (same OS, Office 2010 without SP1) I can open the same document without difficulty.
Has anyone an idea?
Thank a lot
Hello curuska, welcome to the forum.
Are the two computers accessing the exact same document from the same location, or is the same file saved to their own local disk?
A quick test to try:
Open Word, select File?> Open
Choose the corrupted file (but don?t open it yet)
You will notice that next to where it says ?Open?, there is a little drop-down arrow. Click on this and change the option to ?Open and Repair?, then click on it.
In 2003 I purchased a laptop and installed Microsoft Office 2003 using a disk and the numerical key. I should note that I no longer have that disk but I still had the numerical key. In 2013 Microsoft had a special offer to upgrade to Office 2010 using a download from their website and using a new numerical key. I have now purchased a new computer (and will be scrapping the old computer ) and would like to bring this Microsoft office 2010 from the old laptop to the new one. Since I no longer have the original disk can I just download the file from the Microsoft website? If I can which numerical key should I try to use?
The 2010 office key worked.Read other 1 answers