Over 1 million tech questions and answers.

Cannot access a secured share on a NAS

Q: Cannot access a secured share on a NAS

I have a NAS drive with both several unprotected folders and one protected folder. I have no trouble accessing the unprotected folders from Win10, but I cannot get access to the protected one. If I click on the secure folder from File Explorer I get the popup

I enter a userid and password as defined on the NAS . The popup disappears for a few seconds; then a very similar one pops up:

It says "connecting" and doesn't say "Access is denied", but never goes beyond that. I'm a bit puzzled because it looks like Windows is asking for credentials for the whole NAS rather than for the secured "share" within the NAS. I have no NAS-level security set up.

BTW, I've been able to access the unprotected shares with no trouble for years - both from Win7 and Win10. I've been trying using the protected share for only a couple months and have had mixed results. Sometimes I succeed, but usually I fail. I can find no errors logged on either Windows or the NAS.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Cannot access a secured share on a NAS

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 57.2

Hi Tech Support!

About 3 days ago, I stopped having access to sites such as Hotmail, Facebook, eBay on my laptop at home. The pages will not load for me but other sites (such as this one, thank goodness!! can be accessed)

Please help me as I won't be able to check my hotmail at work either as that is blocked too.

Let me know what I have to show you guys as I am very computer illiterate.

Thank you so much!

A:Unable to access secured sites like Hotmail/Facebook/eBay (but able to access others)

Hello and welcome to TSF.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Read other 1 answers
RELEVANCY SCORE 54

Hi,
I really need some assistance here!! All of a sudden with my computer working just fine, i can't access certain sites. My yahoo works fine, craigslist fine. Netflix no, facebook no, I am so confused. I don't want to start playing around pretending to be a specialist but can someone please give me some suggestions??
Thanks!

A:Can't access secured websites

Do you get any message when you try to open? Can you get into any HTTPS: (Secure) sites. Can you get in using a different browser?

Read other 2 answers
RELEVANCY SCORE 54

I've had my laptop running securely on a network utilizing a Linsys router with no problems. I've had to move and also had to leave the Linksys router behind. I'm now using a Dlink DI-524 router. When I connect to the network unsecured, everything is just fine. When I secure the network using either WEP, WAP, or WPA2 suddenly I can only connect locally. I'm not sure why this is. I am running Windows Vista. Any help would be appreciated. Thanks.

Oh and I am using DHCP.
 

A:Local Access Only...When Secured

Read other 12 answers
RELEVANCY SCORE 54

One of our field offices previously created an Access 97 db with security features, and the person who created is long gone.

Now our company is in the process of upgrading to XP. Microsoft's knowledgebase claims that all we need to do is: 1) add back permissions to all users/groups for all objects, 2) add Admin to the Admins group, and 3) recreate the .mdw file on the XP machine using the new built-in Workgroup Administrator. (Copying the Access97 .mdw file to the XP machine doesn't work.) The field office was able to do steps one and two, but step three requires them to know the EXACT Name, Organization, and Workgroup ID that were used in the original 97 db.

QUESTION: Is there any way to look inside that original system.mdw file to see that information?

I've already told them to try copying the objects from the orginal db into a blank 97 db, then converting that one, but they still get an error message about "incorrect password". The users swear that there was no password protection set (and they are able to open the db without entering a password in 97.) help?...
 

A:Converting secured Access 97 db to XP

Hi, Girl.

Look at the shortcuts they used to get into the DB before.
They likely had their usernames "built in" to them to connect to the system MDW. But if they tried to log onto the DB from someone else's PC while logged in under THEIR username, it wouldn't have worked.

That's what I suspect...and it's a fairly common practice to auto-get the user who's on. You can even put the password in there, but I forget what the syntax is.
 

Read other 2 answers
RELEVANCY SCORE 54

Hi,
I have a problem with accessing secured wireless network using my laptop. when I try to connect the laptop to the wireless network, the router refuses the credential even if it's correct. I think that this is a something related to the encryption method but I don't know how to change it because the network is not exist in the "Manage wireless network" screen, so would you please help me

thank you

A:Can't access secured wireless

Find a way to get into your router (Ethernet cable?). You're probably right, sounds like an encryption setting, maybe a mac address filter?

Read other 4 answers
RELEVANCY SCORE 54

I have been having this problem since I got rid of many viruses on my computer and updated the Microsoft Security patch. I contacted Microsoft and they said they believe that there is some spyware blocking me. To be clearer it is blocking me from all secured pages and my newly updated MSN Messenger and Yahoo Instant Messenger while my AOL IM has no problems connecting whatsoever. I have attached my HJT file another thing I recently found when downloading Spybot that DSO Exploit is on my computer..could this be causing the problem....
Thanks for any help,
Jacques

Logfile of HijackThis v1.98.0
Scan saved at 22:18:30, on 21-Jul-04
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\carpserv.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Synaptics\SynTP\SynTPLpr.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\windows\system\hpsysdrv.exe
C:\Program Files\HPQ\One-Touch\OneTouch.EXE
C:\Program Files\Common Files\Symantec Shared\ccProxy.exe
C:\Program Files\NETGEAR\WG511\Utility\WG511WLU.exe
C:\WINDOWS\system32\HPConfig.exe
C:\Program Files\MUSICMATCH\MUSICMATCH Juke... Read more

Read other answers
RELEVANCY SCORE 54

I upgraded to win 2000 and i lost the ability to access my banking sites logon pages, what do i do?

A:help, i can't access secured sites

Check what sucurity settings you have. Click on tools, internet options, privacy. It is best to have it on medium.
Though, this will not apply if you arn't using IE. You would have to do something else. Are you using Internet Explorer? If not, what do you use? Have you tried a alternative browser?

Read other 3 answers
RELEVANCY SCORE 54

.....specifically....http://www.thelotter.com....i can't sign up or play or anything....and i'm not some loto freak, this is just anoying! !
why me and why just this site???
this is my hijackthis log

Logfile of HijackThis v1.99.1
Scan saved at 21:39:53, on 24.4.2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\ZONELABS\vsmon.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\ehome\ehtray.exe
C:\WINDOWS\RTHDCPL.EXE
C:\Acer\Empowering Technology\ePower\ePower_DMC.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\PROGRA~1\LAUNCH~1\LManager.exe
C:\Acer\Empowering Technology\eRecovery\eRAgent.exe
C:\WINDOWS\eHome\ehmsas.exe
C:\PROGRA~1\Grisoft\AVG7\avgcc.exe
C:\Program Files\Winamp\winampa.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\WINDOWS\system32\rundll32.exe
C:\Program Files\Common Files\Ahead\Lib\NMBgMonitor.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Google\GoogleToolbarNotifier\1.2.1128.5462\GoogleToolbarNotifier.exe
C:\Program Files\DNA\btdna.exe
C:\Acer\Empowering Technology\Acer.Empowering.Framework.Launcher.exe
C:\Program Files\ATI Technologies\ATI.ACE... Read more

A:cannot access secured sites....

i see people have looked at this post....please help...i cant sign up for paypal either.....
and i've tryd all the usual advices...

Read other 9 answers
RELEVANCY SCORE 53.2

I upgraded from Windows 2000 pro to Windows XP pro.
On one of the physical hard drives, I had secured a folder so only my login could access it. The main hard drive containing Win2K was formatted and XP installed on it. I forgot to unlock the security attributes on those folders and now I can't seem to access them in XP!
Any help would greatly be appriciated.

Jake
 

A:Access secured folder from 2k after installing XP

Sometimes this works. As the new administrator in XP, use MS Backup to backup the files to another location on the hdd. Then use the restore function to put them back in the administrator's my documents folder. Now see if you can remove the encryption.
 

Read other 1 answers
RELEVANCY SCORE 53.2

Ive been trying for a long time to access a secured network on my laptop. I entered the correct network key, but when I hit 'connect' it just tries to connect for a while and then times out. I have tried using Network Connections Troubleshooting and 'network setup' to no avail! My laptop is the only one in the house that isn't able to access this network. I really don't understand why! Can someone help please?
 

A:I cant access a secured wireless network! HELP!

Read other 12 answers
RELEVANCY SCORE 53.2

Whenever I go to a site that has secured access such as public records, looking up my personal accounts with companies or even to shop on line with secured info, I get denied access, unable to access site. ??????? Thanks for your help and/or any information you can provide on this matter.
 

A:Solved: SECURED ACCESS DENIED

Read other 10 answers
RELEVANCY SCORE 53.2

Using Access from Office XP.

Hello,

After a colleague accidentally deleted about 100 records from our database we have recently used the "User and Group" permissions to restrict the user account from making any deletions.

The problem I have is with updating the DB. Until we used permission any changes would be made by copying the DB onto my desktop, making the changes then exporting any changed forms, tables etc into the "Live" DB at the end of the day when nobody else is using it.

Now with the permissions set a copy of the database will not allow me in, it comes up with the "You do not have permission..." error message without allowing me to log in.

Any ideas?

TIA
SBF
 

A:Solved: MS Access - Secured Database

Read other 8 answers
RELEVANCY SCORE 53.2

I had an old(er) computer running XP and had files-mainly pictures (jpeg)-that were secured using the basic windows security and were password locked. I am not able to retrieve those pictures now as I have had to reformat the drive(s) multiple times and reinstalled the OS. It says I do not have permission to do so even though I had the same user name and password. I need a way to disable the security from an "unauthorized" computer from which I am using now. Any ideas or suggestions?
 

A:Can't Access Secured Files from Old Computer

Read other 9 answers
RELEVANCY SCORE 53.2

I am able to access any site on the Internet except the secured sites (banking sites, credit cards, etc). In this example, I have tried to access the Bank of America website. I am using Google Chrome and IE 8 and the message that I get is:

This webpage is not available.

The webpage at https://www.bankofamerica.com/index.jsp might be temporarily down or it may have moved permanently to a new web address.

This message is what I get from all of the secured sites. It seems that its any site that begins with "https://".

I've tried running the Malware Bytes, Spybot S&D, etc and they found some, which I removed or fixed. Still no luck. I also did the "regsvr dll" changes that I found from the previous "Unable to Access Secured Sites" and still no luck. I've checked my Internet Options and also followed the steps to "fix" the problem (from another message board). Again, no luck. I've even tried restoring the point to a time when I last used a secured site. Again, no luck.

I'm desparate and was wondering if there is anyone that may be able to help me so that I can regain access to the secured sites. Please help!

A:Unable to Access Secured Sites - 2

Have you ever been able to access secure sites ? If so, did something happen just before it stopped working ? New router ? New hardware ? New software ?

Do you have a router ?

Have you tried resetting Internet Explorer back to factory default ?

Umm, check your Services. Maybe the malware disabled something necessary to run encrypted stuff. Are you currently using Selective Startup (msconfig) ?

Read other 9 answers
RELEVANCY SCORE 53.2

Greetings,
I have an odd issue.. a user reports that they are unable to access a network shared folder from their PC. Here is what I have gathered so far:
-The network share is from their PC located at C:\SQL2014. The share name is SQL2014. Their hostname for this example is "ABC".
-If I attempt to connect to the share from the user's PC ABC to \\ABC\SQL2014 I get the generic error:
  "Windows cannot access \\ABC\SQL2014
   You do not have permission to access \\ABC\SQL2014. Contact your network administrator to request access."
-If I attempt to connect to the share by ABC's IP \\192.168.1.140\SQL2014 I can access it.
-If I attempt to connect to the share by ABC's FQDN at  \\ABC.domain.com\SQL2014 I can access it.
-If I map ABC\SQL2014 as a drive letter, I can access it.
-Connecting to this share works fine from any other PC other than ABC.
-I've confirmed the error is affecting any profile old or new on ABC, which means it is a PC-wide issue on ABC.
-If I share C:\SQL2014 as ANY OTHER NAME OTHER THAN SQL2014, I can access it. As in if I share C:\SQL2014 with the share name SQL2014a, I can access \\ABC\SQL2014a.
-Deleted the share and recreated - same issue.
-Created C:\Test and shared it as SQL2014, cannot access \\ABC\SQL2014. It is NOT an issue with the actual SQL2014 folder.

From internet searches I've found the following solutions do not affect my case:
-Clearing CSC/Offline cache (most common working solution)
-C... Read more

Read other answers
RELEVANCY SCORE 52.8

Hi everybody!

I am having a problem and the answer eludes me. When ever I try to login to my MSN account or my personal Ebay account the webpage times out after a few minutes. I ran spybot, ad-aware 6.0 and deleted any infected items. But unfortauntely the problem still exists. I've been trying to figure out this problem for some time but as of now I'm kinda frustrated and not sure what else to do.

Any advice you guys/ladies could give would be appreciated!

-Jim

Here's my hijackthis log:
Logfile of HijackThis v1.99.1
Scan saved at 8:58:35 AM, on 4/11/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Logitech\iTouch\iTouch.exe
C:\WINDOWS\soundman.exe
C:\Program Files\Hewlett-Packard\HP Share-to-Web\hpgs2wnd.exe
C:\Program Files\Common Files\Presentia\LSvr.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb05.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\Bpt\BPT.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\Program Files\MSN Messenger\msnmsgr.exe
C:\Program Files\Hewlett-Packard\HP Share-to-Web\hpgs2wnf.exe
C:\PROGRA~1\Live365\Radio365\Radio365TrayAgent.exe
C:\Program Files\Snack... Read more

A:Unable to access some secured websites/hijacklog

Hi and welcome to TSF.

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem a.s.a.p

Please be patient with me during this time.

We also suggest that you Subscribe to this thread to be notified of fixes as soon as they are posted by our Team. You can do this simply by clicking the "Thread Tools" button located in the original thread line and selecting "Subscribe to this Thread".

Read other 4 answers
RELEVANCY SCORE 52.8

Is it possible to rename a secured Access 2000 database without messing-up the security permissions?

A number of employees (including myself) are using a secured database that I created. I want to change the name of the database but I'm worried that the .mdw file isn't going to recognize the name of the new database. Therefore the security permissions may get messed-up. That is my concern anyway... I used Access 2000.
 

Read other answers
RELEVANCY SCORE 52.8

hi, I had this problem last week, it persisted for several days, but I was able to use system restore to fix it. Today, it has re-occured, and system restore hasn't worked. I went to Microsoft.com, downloaded Adaware, it detected a trojan virus. I followed directions to get rid of it (safe mode, disable system restore, update virus definitions, run a full scan) Trojan has been eliminated, but I still can't access my bank site, AOL IM, or Casino on Net. System Restore now won't go back since I enabled it again. I can, however, get email. Last week, I couldn't get email, so perhaps this is a different problem? I have followed directions on the Cannot Find Server page, checking Internet Options, Settings, LAN connections, etc. None of this has helped. Do you have any suggestions on what the problem could be? I would appreciate any ideas.
 

A:Can't access secured sites-Cannot Find Server

Read other 15 answers
RELEVANCY SCORE 52.8

Hi,
My Computer was working fine till a couple of days ago but now I am not able to connect to any of the secured site. (sites with https:\\)..Can anybody help me out. I am also not able to log into yahoo messenger.
I am completely unaware about internet threats and how to resolve them. Please help. This is kind of urgent.
 

A:Unable to access secured internet sites

Read other 9 answers
RELEVANCY SCORE 52.8

Hi,
I recently replaced my hard drive and now I'm having problems restoring my database. I'm using Office 2000 on an XP Pro machine. I saved 3 files:- secured.mdw, db1.mdb and db2.mdb when i open db1 i see my form but when i click on any of the buttons i get an error message saying the path to db2.mdb is invalid (shows the old path.) The person who originally setup the database for me i no longer have contact with. My username and password work fine and i have admin rights. db1.mdb is a form with a number of buttons but has no editing features ie. unable to re-link tables. In fact the only thing i can seem to do with the form is change to design mode. I have used wrkgadm.exe to join the workgroup successfully but it hasnt changed a thing!
 

A:How do I restore a secured,split Access database?

I think you will ned to go into the design click on the button and look at the properties and change the path in the OnClick properties in Event
 

Read other 3 answers
RELEVANCY SCORE 52.4

Help.. I have 3 desk tops and 1 Laptop. the desk tops are wireless connected via my Xfinity ( cable Modem) and a Trendnet 652- 300 mgb router setup. Recently installed the
Trendnet router ( initially w/o security). I was able to readily connect to and access all pcs to Internet.

However, recently went to Trendnet on line site and installed Router password security. Was able to connect and access the Internet on 2 of the 3 desktop pcs as well as the Laptop. However, 1 desktop ( running on Windows XP Professional, 5.1.2600 SVCPK 3, Optiplex G x 60 ) does not permit access to Internet. Once I get to the screen asking for the password ( network key) , I insert same I receive an error message stating "Network key s/b WEP pr a WPA key". "The network PW needs to be 104 bits- to be entered as a 5-13 ascii character or a 10 -26 hexadecimal characters".

FYI.. I went to the accessible desktops PCs an reviewed each of their " wireless properties" Advanc ed Settings which read -Netwk Auth. - WPA2-PSK & Data Encryp- TKIP.

However, the EX Prof. pc 's Wireless Advanced Settings options only have as options WPA-PSK & WEP settings.
I imagine that this anomily is the reason I can't access the Internet on this PC?
 

A:Unable to access Internet via secured Wireless setup

Read other 6 answers
RELEVANCY SCORE 52.4

HELP! I installed a msn email account so no one would have access to my emails. Now i downloaded msn messenger and the little symbol in my toolbar, now lets anybody on my computer look into these emails!! All of a sudden, the page does not request my password anymore!!And it shows, that i have an email address there. Is there something to be able to block this "access for everyone"! I do not even want my msn email to be seen on this computer!
Thanks for your help! M
 

Read other answers
RELEVANCY SCORE 51.6

I need to disconnect from my wifi and reconnect again everytime it happens. Any solution for this?
 

A:HELP: Wifi showing No internet access, Secured every 10min (Moved W10)

Read other 6 answers
RELEVANCY SCORE 51.6

Okay, here's the shpeel...My client has a hp tablet notebook using xp tablet edition OS. (Her laptop from her work.) The wireless router that she is using at home is a belkin wireless N. She is able to access internet from the router fine when it's unsecured however, when I do secure it, no matter what I set it to whether it would be wpa or wep, it doesn't connect to any sites. I'm able to ping to the router, but not externally. I've tried resetting the router a few times but that didn't work. It does say, that I am connected to the SSID even though I'm unable to connect to the internet. I also tried using the intel pro wireless utility instead of using the windows wireless utility, but still no go. There's no issue with the router because there are about 4 macs on the network that access the router wirelessly just fine with or without encryption. I'm just using plain 'ol dhcp. Everything's pretty much default standard settings with the router. Does anyone know what's causing this issue?
 

A:Solved: Unable to access internet wirelessly using any secured encryption

Read other 7 answers
RELEVANCY SCORE 47.6

I've got an app that requires data sharing between about five users so I decided to put a MS access back end on the server and to give each user a MS access front end with linked tables (linked to the MS access back end on the server).

BUT how come only one user at a time can access the back end tables?
ITS STRANGER THAN YOU THINK... read on.

IF I run two copies of the back end from one physical PC where I am logged in, both copies of the back end CAN run simultaneously with no problem.

IF I try running two copies of the front end from two physically separate machines (where I am logged on to both machines at the same time) I cannot run both front ends at the same time. One will work and the other will sit there with the hourglass until the first front end is terminated. (FYI, the back end .MDB file belongs to me with all permissions and is sitting in a folder that belongs to me with all permissions on the server.)
I originally posted this thread on an entierly separate help forum but received few helpful ideas so I'm posting it here also.

With one front end running, it is possible to start another front end (bu tnot open the forms) and to open the linked tables and queries based on them directly in the other front end instance, It's just that the forms based on queries and tables won't run in the second front end.

NONE of the tabledef attributes of the linked tables are set to dbAttachExclusive.

ALL of the form.RecordLocks are = 0 (no Locks)

Da... Read more

A:Access DB front ends won't share Access DB back end

Read other 6 answers
RELEVANCY SCORE 47.6

I've got a strange problem dealing with a 2012 R2 share.  We have a lab with 30 Windows 7 Enterprise workstations.  They all have the same desktop via a GPO applied folder redirection to a share on the above mentioned 2012 R2 server.  All
but 4 of them can connect and pull the desktop with the appropriate shortcuts, network folders, etc.

So the share permissions have no explicit denies.  In an effort to resolve this issue I've added both Everyone and Authenticated Users with Read permissions on top of the appropriate AD Group object that already had Read permissions and of
course SYSTEM and Domain Admins with Full Control.  The NTFS permissions have of course CREATOR OWNER, SYSTEM, and Domain Admins with Full Control.  The appropriate AD Group also has Read permissions.  No explicit NTFS denies either.

Using either the same account that belongs to the appropriate AD Group or my Domain Admin account (which doesn't have the redirected desktop) I can login to all workstations and all but the above mentioned four get the folder redirected desktop.
 When I authenticate with my DA account and try to connect to the share on those four computers I get the same error the user gets:

Network Error
Windows cannot access \\SERVER\Share$
You do not have permission to access \\SERVER\Share$.  Contact your network administrator to request access.

I think we've all seen this error before.  But I've only seen it associated w... Read more

Read other answers
RELEVANCY SCORE 44

Server 2008 share with Active Directory. All other shares on server can be accessed with no problems at all.

When I try to access \\servername\faculty I get the error message:
"Windows cannot access \\servername\faculty. You do not have permissions to access \\servername\faculty. Contact your network administrator to request access.

If I access by IP address \\192.168.1.250\faculty it loads fine.

I have:
Removed and re-added computer from domain.
Release and renewed IP and flushed DNS.
Deleted the share, re-created it, and re-assigned the user's rights.

Any other thoughts/suggestions? Thanks!

A:Can access share by IP, not by name

Code:
Ping servername
Does it resolve to ip address 192.168.1.250?

Read other 2 answers
RELEVANCY SCORE 44

I am obviously missing something: I have a number of shares on my Windows 7 machine. 3 of 4 shares are accessible from my XP machines, one of them is not accessible. I remember in the XP world this happened occasionally and the solution in that case was, to disable and then re-enable sharing. I tried this in this case but it did not resolve the problem. I compared the settings between the folders and can't see any difference. I shut off ZoneAlarm on both machines but the error remained. Any idea what I am missing? (Screen shot attached)

A:Cannot access ONE W7 share from XP

I haven't had any answers to this question yet. Does anyone have any ideas? Even far fetched ones .....
Thanks!

Read other 5 answers
RELEVANCY SCORE 44

I'm working in a new office environment and am set up as an AD admin on server 01 (win 2003), which is the Domain Controller. Server 02 is the fileserver and hosts the share. I can not map my workstation to the share to save my life! I can RDP to the file server fine, authenticate with my admin logon and perform anything I want while in but I simply cannot get to the share from my XP Pro workstation. I believe I have the profile settings correct and have joined my worksation to the domain, unjoined it, joined a local workgroup, unjoined....nothing. I also have tried using the built in admin username/pass, to no avail.

Any thoughts?
Thanks in advance.
 

A:No share access

Do you have any internet security suites / 3rd party firewalls installed?
 

Read other 3 answers
RELEVANCY SCORE 44

Hi:
I have a question, I have 2 W2K3 servers, one is on DMZ side, and the other is behind firewall. I created a share folder on DMZ server, now I want to access it from computer behind Firewall. is it possible? How? Thanks!
 

A:DMZ access share

so you physically have server 1 - firewall - server 2 or do you have firewall - server 1 - server 2 with server 2's IP just placed into the firewalls DMZ? ? and you want a share between the 2? are they on the same workgroup or domain? If its the first physical setup then have you added a route from server 1 through the firewall to server 2? If its the second it should just be a standard share like any others.
 

Read other 2 answers
RELEVANCY SCORE 44

Hello,
I got a very very strange problem : I can access shares by names (I do not know if it uses DNS or Netbios names), but I'm not able to connect to them by their IP addresses. DNS resolutions is ok, reverse resolution is ok...
Thanks for your help.

hatem

Read other answers
RELEVANCY SCORE 43.6

I have one computer at the office (OffComp), running XP Pro, connected to internet via DSL through Qwest.
I have a remote computer (RemComp) at a home location, running XP (Home/Pro?), connected to the internet via broadband cable through ComCast.
I want the person at RemComp to be able to run MS-Access on RemComp and access a database file on OffComp. But, since there will also be a person at the office using OffComp for all kinds of things, including concurrently accessing this same db file, Remote Access is not appropriate. (Also, we don't want the lady using RemComp to have access to anything except the db file).

I know just enough about networking, VPN, file sharing and firewalls to be fairly sure that a VPN connection is what I need. I'm kind of thinking that this is not so much a "problem" (yet, anyway) as a simple, "How do I..."

So, how do I configure RemComp and OffComp so that a user on RemComp can access a specific file (or folder of files) on OffComp over the internet? (Maybe, is there a good book that covers this? I am fairly tech savy, I just don't know what the details of this process are. But I do love details.)
 

Read other answers
RELEVANCY SCORE 43.6

I have a windows 7 laptop on network.
Windows 7 laptop can see its shares but cannot access - getting "unspecified error" - yes on the permissions tab I included everyone and checked full access.. I also added my user account which does have a password and still cannot see the shares set up on my own computer.
Other Windows XP machines on the network CAN see the windows 7 share AND access it...(imaging that? other xp pcs can see it and access the share, just not the pc with the share on it)

Also - windows 7 cannot browse the other computers when I type \\192.168.58.51 in the ddress bar.
Note - I can PING 192.168.58.51 so its not a routing issue.
I also shut down my firewall software and still no good.

I have tried everything. Oh by the way, the share used to work. one day it just stopped working.
Has anyone experienced this and have a solution?

A:Windows 7 Cant access its own share

Which ever A/V software you are using is most likely causing this problem to occur. You sometimes need to uninstall your A/V to fix this type of problem. This type of thing happens all the time and it can happen with pretty much any type of A/V software, all to often the only way to fix this problem is to uninstall the A/V or configure it to work with Windows 7.

Read other 4 answers
RELEVANCY SCORE 43.6

Our network runs on a 2008 active directory domain, and our domain controller also is an internal DNS server; we have an additional server that is our internal web server and hosts a RAID 1 mirrored file share for everyone to put their data (which we have folder redirection configured on for the My Documents folder, and people also access it as a mapped network drive). It all works flawlessly, except on two client computers.

1. The two clients can ping the file server both by name and IP.
2. Clients can can log into the file server by remote desktop, by name.
3. Nslookup shows that the clients can communicate with the DNS server and resolve the domain name to the correct IP address.
4. Clients can access the internal sites at http://<file server>

5. Clients cannot access the file share at \\<file server>, but can access it at \\192.168.1.104.
6. I have already flushed the DNS cache on the client machines.

It?s really odd, because it would seem like this is a DNS issue but everything else works: http dns works, nslookup works, and I already flushed the DNS cache. These are the only computers having any issues at all. All the computers on the network have their dns server manually assigned, and all the servers have a DHCP reservation so their IP won?t change.

You guys have any idea?

A:can access file share by ip but not by name

Still haven't been able to get any responses, so here is a bump. I hope somebody has an answer here.

Read other 7 answers
RELEVANCY SCORE 43.6

Ok so what I have is a windows 7 pro pc with several user accounts set up, I have a folder shared as g, I am booting a separate pc to dos and trying to map the share as a drive.  Syntax: net use z: \\[Share PC]\g
It prompts for a username which I have tried several users including admin users.  It then prompts for a password and I type in the correct password for the account.  It tells me the password is incorrect.  When I check the windows security
logs it shows an authentication request with the correct user name.  See the below error log.  I have attempted too many fixes to begin to list here but I have removed all group policies and verified it is shared specifically with the appropriate
users and they have full access.
Also it may be worth noting there are several other devices on the network and all windows xp devices can be mapped with their respective accounts.  Below is the event in the security log.  I have replaced instances of the server(Windows 7 Pro
Machine) name with "[Server Name]," however the server name is listed properly.  Any help/ideas would be appreciated.
An account failed to log on.

Subject:
Security ID:
SYSTEM
Account Name:
[Server Name]$
Account Domain:
7454
Logon ID:
0x3e7

Logon Type: 2

Account For Which Logon Failed:
Security ID:
NULL SID
Account Name:
pos
Account Domain:
[Server Name]

Failure Information:
Failure Reason:
Unknown user name or bad passw... Read more

Read other answers
RELEVANCY SCORE 43.6

I have a similar Problem which I would like to resolve. I am trying to connect vista to a NAS folder with a username and password. It won't let me log in to it at all. Windows xp will let me go in as usual. Can anyone help?
 

A:Network Share Access

Read other 10 answers
RELEVANCY SCORE 43.6

I have a few computers on the network and they have shared files.I can see their shares fine...they can't see mine.
\\192.168.0.1 ->this doesn't work for them...they keep getting the error that they don't have permission to acess it.
\\192.168.0.1\SharedFolder
this works for them.They are mixed machines...vista , windows7 but they all get the error when trying to connect directly to my ip.
I tried enabling and then disabling homegroup(not using it btw) turning password protected sharing on and off...NOTHING works
What does one have to reset/fix in order to connect to the ip and see the shares on that machine.
HELP!

A:Can't access network share

Hi,

try using this registry patch on the affected computer (the one that has the shared folders, 192.168.0.1)

extract the attached zip file, merge the registry file (double-click on it) and then reboot. Then try to access the shares once again.

Leave password protected sharing OFF for now.

Good luck. If you need some more help, just let us know.

Read other 6 answers
RELEVANCY SCORE 43.6

Hello

I am having trouble networking 2 Windows 10 computers together on my network.

This is kind of odd, I have a Windows 7 PC that can hit the file share with no issues. And on the troubled computer I can access the shares on the Windows 7 PC. But the Windows 10 desktop to the Windows 10 file server mapping will not work

On the problem computer can ping all the computers both by name and ip address. I can even connect to the server mapping to it using an IP address. Also I see all the computers in my network folder, but whenever I click on the file server I get the "error 0x80070035 The network path was not found". I to just map out a drive to the server using the IP address, but when I try this as a work around I also get the same error message. I can also connect to the DLNA share through the media section on the file server automatically.

I have the windows firewall open for what I think are the right ports, but no extra firewalls.

I was hoping someone had seen a simlar issue and had a fix, I have tried numerous things online but nothing seems to work.

Cheers

A:Cannot access Windows 10 Share

So I managed to get this to work for a minute.... I turned Netbios on, on the interface adapter itself....
1- Click the Start Menu or Cortana search and type "network." (Or Click on Settings -> Network&Internet)
2- Select Network and Sharing Center when it appears.
3- Click on Change Adapter Settings in the left pane.
4- Right-click on your Ethernet/Wireless adapter and select Properties.
5- Select the TCP/IP v4 protocol and click Properties.
6- Click the Advanced button.
7- Click the WINS tab and check the box Enable NetBIOS over TCP/IP.
8- Click OK.
9- Click OK.
10- Click Close.

I was able to get in. So I got bold and rebooted, now its broke again. I checked to see that it was still turned on and it is... Any suggestions here?

Read other 0 answers
RELEVANCY SCORE 43.6

My Vista home premium computer cannot access the shared folders on my XP home computer via my LAN.

I can access the Vista computer from the XP, but when I try to open the XP folder from Vista, I'm prompted for user name and password. Both computers are in the same workgroup, I have the same logon user name and password on both as well.

If I try to connect with net use, I get:
system error 86
the specified network password is not correct

Firewalls are off
Anti-virus is off
The RestrictAnonymous registry setting is 0
 

A:Vista cannot access XP share

Read other 9 answers
RELEVANCY SCORE 43.6

The setup:
Two Windows 8.1 pro boxes. Each one has a different MS account associated with it. Box A has a shared folder. Premissions set with "everyone" rw. Box B is trying to access the share. When Box B opens Box A in the network it prompts for credentials. (box that pops up is shown below) Box A will accept any username entered, but it will always pop up the box asking for credentials. Why is this happening? I noticed that it is using the computer name for the domain, is that normal? Why would it even need to show the box if the everyone group is added to the share? I've tried everything I could think of, nothing works. It's not just Windows 8.1 that cannot access the share, even a Windows 7 box gets the same popup. My network setting have password protected sharing disabled, and use user account, not homegroup is selected. Network setting are identical on box A and B.

A:Anonymous Access to a Share on 8.1

Try this link: trying to share folders on 2 windows 8 PCs-network passwor

Read other 10 answers
RELEVANCY SCORE 43.6

Hi All,

I've been trying to set up my home network and share files. I have set everything up according to Windows 8.1 settings, but still can't see anything other than my own computer in Network. All home computers say they are "Shared" I have shared my drive, and particular folders, but can't see anything, on any computer.

I assume this is because of a security issue. So I went to the security tab in Properties of the drive I want to share and clicked the read function. But it told me it could not do this because the access was not granted to a restriction in Bootmgr.

I tried to get into Bootmgr, but it would not allow me. So I clicked out of that, thinking it did nothing. But when I went back into the security tab, the read box was ticked. This happened on all the computers I'm networking, all Windows 8. But I still can't access any files between my networked computers.

Any thoughts?

Cheers

Rob

Read other answers
RELEVANCY SCORE 43.6

Sometimes can't access share folder, is there some way to troubleshoot?

Read other answers
RELEVANCY SCORE 43.6

well everytime i need to enter a password it say incorrect loging

am using windows 7 and trying out the hidden share feature, i try to use \\nameofpc\c$ and then the login things pops out and i enter username and password and then it tells me incorrect login, access denied.

i think this something else besides having default share on. I do have same username and password in both computers and in the same workgroup both windows 7

same thing when accessing my virtual drive it ask me for creditials and tells me incorrect when i have the same password and username on my virtualpc windows 7 computer.

A:Trying to access hidden share

i found that administrative shares only work in a domain

Read other 2 answers
RELEVANCY SCORE 43.6

Dear all,

I have a pretty weird case, Recently try to access a shared folder, I set up full control everyone permission.
On my laptop I have no problem accessing the file. however on my PC, It shows that I don't have permission to access although I'm using the same AD account. I try on others PC there is no problem.
Then on My pc I login with a Adminitrators account, it work perfectly fine. but if we use any Normal Domain account user on the PC, We cannot accesss it, some account said, we are not connected on this network, some account said we don't have access right.
Can anyone please help?
thank you

Read other answers
RELEVANCY SCORE 43.2

Howdy guys. I'm really stuck on this one, and I haven't been able to find an answer as of yet anywhere I've looked. I'll try to be as detailed as possible:

I'm doing some work for a company who has 13 computers networked together. I just upgraded 3 of their computers to Windows 7 machines. One of them is being used as a database server, but is not running any sort of server software. It's a Win7 Pro 32 bit machine, with network access to the folders required for the database shared to "Everyone", and password protected sharing turned off. The problem computers are running Win XP SP3. Windows Firewall is turned off (which is required by one of the databases..I still don't understand exactly why), and I'm running Microsoft Security Essentials on them currently for antivirus.

Here's what's happening: Randomly, and for no reason that I can get to the bottom of, 3 of the machines lost connection to the shared network folder that the database uses. At one point, I narrowed down the issue to being something caused by Symantec Endpoint Protection (there was a bug in the version they had that could cause this problem) and the only way to fix it was by running Symantec's CleanWipe utility. This worked on 1 of the machines as a permanent fix. On the other two however, the issue continues to occur. If you try to launch the database program, it will lag and freeze windows explorer. If you try to access the shared folder from My Network Places, it will also lag up and freez... Read more

A:Losing access to network share

It would seem to me something was missed by the norton removal tool on those two machines. Especially considering the problem does no occur in safe mode.
Speaking of safe mode have you tried running the clean tool in safe mode?

Read other 9 answers