Over 1 million tech questions and answers.

cannot format usb drive

Q: cannot format usb drive

My computer knows the usb drive but I canno open the files on the drive.The data on the stick are not so important.So I tried to format the drive.But I cannot format the usb drive.
How can I repair it?

Help me !
Yin Minn Pa Pa

RELEVANCY SCORE 200
Preferred Solution: cannot format usb drive

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: cannot format usb drive

Did you try formatting it in Disk Management?

Read other 1 answers
RELEVANCY SCORE 50.8

Hi everyone,

I recently accidentally formatted a hard drive. So, I quickly install a file recovery software (EaseUS Data Recovery). Then the result shows that most of SWF files are big in size. I think that lots of my files have been converted or combine with other files. So, how do I recover my files?

A:File format changed into other format after format a hard drive

This may not be the best answer, but I would recover the files first. That is you biggest concern right now. Then try to see what you need to do to fix them.

Read other 4 answers
RELEVANCY SCORE 46.8

I'm backing up everything from my C: drive to drive F: using ntbackup, but first, I'm formatting the F: drive. For the formatting part, I want my script (simple batch file) to make it just happen--I don't want to respond to two prompts before formatting each time I run it. Any ideas?When I do this:format f: /fs:ntfs /v:"Backup_160"It prompts me to enter the volume label for this drive. Then it asks if I really want to erase the thing. I am thinking a "/Y" tacked onto the end will suppress the prompting about whether I want to erase it. What about the volume label prompt? I thought the "/v:"Backup_160"" was supposed to answer this question, but it doesn't seem to. Whether I remove the "/v:" parameter or leave it there, it always prompts. (Note that in this case, "Backup_160" was both the old and new name of volume F:; that's what I want it to always be called when I backup.)Also, what's the best way for me to overwrite the old backup file (Backup.bkf) each time with the new one, via batch file? Is this what the /T and /G switches are for--to overwrite an old backup file?Here's what I used last night:format f: /fs:ntfs /v:"Backup_160"ntbackup backup c:\ /n "Backup.bkf created 10/16/2006 at 1:08 AM" /v:yes /r:no /rs:no /hc:off /SNAP:on /m normal /j "Weekly System Backup" /l:s /f "F:\Backup.bkf"Thanks,Hotshot309

Read other answers
RELEVANCY SCORE 46.4

Harddrive Lacie 250GB connected trough firewire 800:

XP says it's a RAW partition (used to be NTFS)

I have restored all the files from this drive (to another), and now I would like to reformat the drive to NTFS.

When XP tries to format it, it says ehh, " Error ..can't complete the format".

Anyone have any ida how to get past this problem:
I have Easy Reovery 6.03, Fix it utilities and more.

Any suggestions would be most welcome

System XP sp2 with all updates installed
 

A:PROBLEM: Xp reports RAW format, but I can't format the drive to NTFS,,,

I have run into the same problem except it is formatting 4.7 gig discs. If I find something that will help you, I will let you know. Let me know if you get a solution. It may assist me with my problem..........

AMC
 

Read other 3 answers
RELEVANCY SCORE 45.6

hi,

i've purchased a seagate 1TB external hard drive and need to format it in FAT32 format.

how can i go about doing this using windows 7?

A:how can i format my external HD drive into FAT32 format

  
Quote: Originally Posted by Waqas83


hi,

i've purchased a seagate 1TB external hard drive and need to format it in FAT32 format.

how can i go about doing this using windows 7?



Hi and welcome

um, why do you need to? there are several 3rd party apps that can but since win 7 knows NTFS, it will not format fat32. Just checked to be sure.

KEn J+

Read other 9 answers
RELEVANCY SCORE 44

Hello All,

I'm new to this forum seeking help for the issue below. I've searched for similar threads but all are either very old or not specific to my problem . . .

I/O Magic External USB Hard Drive (2007)
Seagate 250mb IDE
Initial problems appeared as the unit began to operate slowly, taking a long time to boot up and for folder to appear in Windows Explorer. Eventually the unit stopped working completely and would freeze up the host computer. Once the external was powered down the host computer would “unfreeze” and resume normal operation.
I attempted to determine if the external chassis might be the problem and removed the HD, mounting it as a slave in an older Dell running Windows XP (this unit had the correct IDE cabling). After correcting a “Don’t Have Permission to View Folder” error, I was able to see the drive. However, when attempting to open the drive in Windows Explorer, the drive at did not seem to respond at first. Eventually I got a pop up that said the “Drive is not formatted, do you want to Format Now?” I didn’t want to do this, so I ran Diagnostic Tools to try to Fix Disc Errors, and got the final message that the disc is in “Raw Format”, and that’s where I stopped.
This drive was a backup to the primary HD in my HP, whose motherboard died just prior to the problems detailed above. It contains ordinary personal data, but also my entire digital collection of music which I’d like to recover. I would rate my level of tech expertise abo... Read more

A:Do You Want to Format / Raw Format on External Drive

Read other 11 answers
RELEVANCY SCORE 43.6

I have a z575 with a SSD divided into a c drive and d drive. I just formatted the c drive assuming I could leave the d drive intact with the data. when I try a fresh install on the c drive with a Windows 10 disc, I get     Recovery     Your PC Device needs to be repaired     A required device isn't connected or can't be accessed.     Error Code: 0xc000000f      Press Enter to try again     Press F8 for startup settings Enter does nothing.F8 does nothing.Each time I reboot hoping to snag the dvd drive, I get immeditatly sent to the Blue screen above. Should I be able to install windows 10 to the c drive regardless of the d drive?I have been running Windows 10 with no problems other than a long lag on boot up, I think because of an old Windows 7 installation. Any insight would be appreciated!Thanks!

Read other answers
RELEVANCY SCORE 42.8

I want to prepare a factory fresh drive so that I can use it to save backup images. Soon I will have a second drive that will only be used to store data files. Neither drive will ever be used for the installation of an operating system. From what I've read, I see no advantage to having more than a single partition on either drive. I know I want to use NTFS.

This should be straightforward. I'm finding it is not. I cannot formulate a search that points me to the right tutorial or thread. Either I get hundreds of options to consider or, if I try to narrow the options, no answer is found.

Please point me to the right discussion. Perhaps the answer will help others who come after me, too.

thanks

baumgrenze

A:Format & Partition New Drive to Use as a Backup Drive or Storage Drive

Do you know how to make a partition and format a drive?

You can do it all in Windows Disk Management.

You don't need to do anything special to the drive just because it is going to store images.
Treat it like any other drive.

Format it with a single partition.

Store your image files on it. Use a folder structure if you want to---perhaps naming a folder something like "Macrium image of C partition, 060714" so you know the date of the image.

Nor do you need to use a separate drive just for image storage.

Make your images and store them like ordinary data. Back up the images just like you'd back up any other important data file. That's what they are: important data.

Read other 9 answers
RELEVANCY SCORE 41.6

I have a very straightforward question: I am running WinXP Pro on my computer and I just got an external USB hard-drive to back up my data before I upgrade to VISTA.

My internal hard drive is NTFS file system, and the external drive is FAT32. My data backed-up perfectly.

However, I understand that VISTA is NTFS only (for the drive that it's installed on, which in my case will be the internal drive). I will be installing the VISTA OS on the internal drive, and using the external drive solely for backing up data.

I don't want to back up my data externally, upgrade my PC to VISTA, and then discover that I can't access the data on the external drive.

Here's my only question: will VISTA work with a FAT32 external drive, or do I have to convert that external drive to NTFS *before* I attempt to connect it to VISTA?

awaiting your replies - I'll appreciate all the help I can get!
 

A:will VISTA read a FAT32 external hard drive,or do I have to format the drive to NTFS?

Read other 6 answers
RELEVANCY SCORE 41.6

Hey Guys,

I have a netbook which I want to recycle however it has been used for business purposes and I want to properly format the drive. The issue I have is that it does not have a CD drive nor does it have a working screen. I have connected the hard drive to external display and manually deleted all files from the computer but I know this is not really 'deleting' anything.

How can I format the drive from within Windows? Unfortunately I cannot get bios to display on the external display so I can not do anything from DOS or Bios simply because I can't see anything!

My latest attempt has been to use Active KillDisk to create a bootable USB however this is when I ran into the issue of the Bios and DOS not displaying, it will only display once windows has been loaded.

Any ideas?
 

A:Solved: Help needed to securely format hard drive - no screen or CD drive

Read other 7 answers
RELEVANCY SCORE 41.6

i go into device manager and i see tsstcorp cd/dvdw ts-h652m .however device is unable to play any cd ,dvd or burn.problem also with usb2.0 drive says unable to format and cannot display any files however it does work on any other pc.I would appreciate if someone can help me resolve this.this forum is great by the way I didnt know barely how to turn on pc and thanks to this forum I AM MORE KNOWLEGIBLE ABOUT PC.THANKS IN advance.

A:my disk drive tsstcorp cd/dvdw ts-h652m also usb drive says unable to format

Uninstall the cd/dvd drive from Device Manager and restart Windows.

After Windows restarts the drive will be reinstalled.

If still having issue try the solution here

Read other 3 answers
RELEVANCY SCORE 41.6

Hey any help would this would be GREATLY apprciated.

One of the hard drives on my pc [250gb drive , drive E:\] has about 180gb of that data inside one folder. Today I went to open the folder and the pc locked up for a second and then said that DRIVE E:\ is not formated and asked if I wanted to format it. If I select no and try to access the folder again it does the same thing. I cannot risk loosing any of the data that is inside this folder on this drive. IF anyone could try and help me access the files inside this folder I would be so appriciative!!!

Someone please help....


btw...

All other folders on the drive open just fine...

A:Folder inside drive will not open - telling me to format entire drive..

It also says that there is 0 bytes in the folder when there should be over 110gb ...

Is there any sort of program that will repair something like this...

When I right click the drive in my computer and check properties it says used space 184gb...but then when I go into the E:\ drive and select all the folders and select properties it says there is only 74.2gb used ?

The other 110gb is in that folder that I am not able to access....

Read other 1 answers
RELEVANCY SCORE 41.6

format my hard drive for clean install of new windows 10 on flash drive

Read other answers
RELEVANCY SCORE 41.2

Hi,I am using a windows xp sp2 and a HL-DT-ST DVDRAM GSA-H42N cd/dvd driveThe problem is my cd drive is sometimes detecting the contents of a cd and sometimes not. I am not even able to find the pattern because the same cd when i insert it into the drive at times it shows the content and at times not.I want to format only my C drive using the windows xp cd. But the problem is when i am trying to boot from the cd, the os is not able read from cd.I checked the bios boot priority configuration and it is set to cd/dvd first.what is the other way of format my c drive other than by booting from cd ?i copied all the contents of the "windows xp installation disk" onto my usb flash drive and wanted to setup windows xp.when i double clicked on "setup.exe", i was able to go to the blue screen which had options of "collecting information, dynamic update, preparing installation, installing windows, finalizing installation". the problem is ..it has not asked me whether to just format c or format c,d,e drives.what will happen if i go ahead and format. will i lose all my data in d, e, f drives also..or by default it just formats c drive even if it does not ask us ?I am actually facing all these problems bcos...my pc is not booting from my cd.Please help me with answers.thank you

A:cd drive not reading contents of disk and does xp installation just format c drive ?

Hi,

When this happens can you eject the cd? When it doesn't read it does it still sound like it is being read in the cd drive?

Read other 6 answers
RELEVANCY SCORE 41.2

Hi. My external hard-drive stopped working yesterday. This is what's happening:

I plug it in as usual, then it says "You need to format the disk in drive F: before you can use it. Do you want to format it?".
I'm thinking it's more than likely an issue of having pulled out the usb cable without clicking 'safely remove'.

Yesterday I actually got it working again briefly by typing "chkdsk F: /R" into command prompt. Now when I do that it doesn't work, it says "The type of the file system is NTFS. Unable to determine volume version and state. CHKDSK aborted." And when I double click on F: drive in my computer it says "F:\ is not accessible. The file or directory is corrupted or unreadable".

Are there any other options besides using some sort of data recovery tool (I'd rather not do this just because it takes a long time)?
 

A:Solved: External hard-drive:...format the disk in drive F: before you can use it.

Read other 11 answers
RELEVANCY SCORE 41.2

Other than TestDisk, what are some other free software downloads that
a person might try to recover data from a formatted drive? The drive was
formatted by accident.

This addresses an issue form one of my previous post but I have not
had any luck with TestDisk.

Thank you,
 

A:Free Drive Recovery programs for accidental drive format.

Please don't post duplicate threads. If your thread is in an inappropriate forum, please report it and a moderator will move it.

Continue the problem resolution here: http://forums.techguy.org/business-applications/871411-possable-recover-formatted-drive.html
 

Read other 1 answers
RELEVANCY SCORE 41.2

The other day i went to format a partition(called drive D) of a hard drive in dos mode. Just after i pressed enter for the format to begin i relised that in dos my partitioned drive D was actually called drive G and my other hard drive which was drive E was called D, so I was actually formatting drive E. I quickly pressed restart and once in windows tried accessing drive E but it wouldnt let me because it sais it needs to be formatted because it hasnt got a File System. Ive used getdataback to access it but I want to know if there is a way to give the drive a file system name without actually formatting it?
 

A:Hard drive problem.. Cancelled format now cant access drive

Read other 6 answers
RELEVANCY SCORE 41.2

Hi,

I have an anternal media drive whith a number of hidden partitions which do not show up in windows. One of these partitions had become corrupted and unuseable and I would like to try re formatting it to fix the error.

In Partition Magic there are a number of drives listed. Some of the drives on the partition have assigned drive letters but the one I want to format has is greyed out and listed with a * infront of it. Partition Magic will let me enter the drive to view details and even gives me the option to format it BUT then wants to assign the drive the letter A:

If I do this then the media drive will be unable to work as it will have lost the file path it needs to record on to. I just wnat to re format this drive (with whatever freeware) and have the drive letter (wich is currently unassigned) untouched so that the media player never knows its been formatted.

File system is FAT32, partition size is 10gb, using Partition Magic, there are 2 partitions with assigned drive letters and 3 without on the 1gb HDD.

Any help or suggestions appreciated thanks.

Read other answers
RELEVANCY SCORE 40.8

I have a HP Pavillion laptop computer. I needed to replace my hard drive, the salesman at the store said I could buy an external hard drive and remove it from the case and use it as an internal. I did that. Now I get NTLDR is missing. I ordered recovery discs from HP but nothing happens when I try to use them. HP said I need to format the new hard drive but I don't know how. Can someone help a beginner?
 

A:Solved: how to format an external drive to be an internal drive

Read other 10 answers
RELEVANCY SCORE 40.8

I need to format my hard drive [D & C drive]

so i wanna know Will format the hard drive [D & C drive], delete the all file
in it? Like the software that i install [ C:\Program Files], will they remain there or
will be deleted?







i already make a back up to all my Document project [ on D drive as i shown above] but to be honest, i dont want the process to delete my " Program Files" folder [ C:\Program Files]& my Document project [ on D:drive]........


** I just reinstall my pc 4/5 days ago [ maybe on 20 or 21/3/2012 ]

A:Will format the hard drive [D & C drive], delete the all file in it?

Formatting a drive or partition will completly wipe it, delete everything.

Take note you will be unable to format a drive with Windows on it if you are using that installation, you need to use a boot disk. If using dual boot you can format one Windows drive from the other.

Read other 2 answers
RELEVANCY SCORE 40.4

I have a HD for the OS and a 160 GB HD for files. I replaced the OS HD by cloning while the data drive was disconnected and now my data drive is no longer seen as NTFS, disk management sees it as RAW format and wants me to format; it also indicates 0 bytes used and 0 bytes available; the size is also incorrectly displayed as being 30.03 GB instead of 160.

Have run the Samsung diagnostics which indicate no problems.

Put the original HD back but it also showed same results.

Did a fresh install of XP with data HD connected with same results.

Also tried moving HD to different PC with no luck.

Tried using Knoppix but it does not recognize the file format and does not see the data.

Anyone have any ideas how to fix?
 

A:RAW format...my drive is now RAW format...

Read other 13 answers
RELEVANCY SCORE 40

Hey sevenforums,
very sorry if this thread is a double, I have seen others with a similar problem but unfortunately none of their fixes have been able to help me.

I have upgraded my computer to use solid state drive for the operating system. as other walkthroughs have suggested I have removed my separate hard drive in order to do a clean install. windows installed fine but when I went to attach and format my secondary drive I ran into some problems. formatting from within Windows told me that the hard drive was already in use and I had to shut down other applications. then I tried formatting it from within the Windows 7 Installer and it told me that I could not because I had my system files and what not on there. then I tried to use diskpart but it told me the same thing when I ran the clean up it said I had my page files and system files and other things on there.

is it possible that my computer is confusing the new system files with the old? they both have installed the identical copy of Windows.

I have backed up my old drive so recovering the files off of it is not an issue at this point I would just like to do a big dirty format

sorry for the formatting and punctuation errors I am using my phone

A:Can't format secondary drive (old system drive)

You can use Partition Wizard free to wipe that old disk. If it doesn't do it inside windows, create the bootable media and boot into PW, format there.

Windows most probably just sees that system files etc/could be marked as active also and stops format.

Read other 8 answers
RELEVANCY SCORE 40

I have a laptop with a partition HD. I want to re-format the entire drive and delete the partition. The problem I have is that I do NOT have a floppy drive and only have a CD Rom drive.

I can find figure out how to reformat with out a floppy drive to boot from.

Please help me!!!!

Running XP now and want to re-install it after.
 

A:How to format a hard drive w/o a floppy drive

Simply boot from the XP CD. It should do the lot.
XP does not usually use a boot floppy.
 

Read other 2 answers
RELEVANCY SCORE 38.8

This computer had two hard drives and both have windows xp installed. The D drive is corrupted and I want to format it and leave XP off and just use it for storage. I cannot get into windows on this drive.

I don't want to touch the C drive as it has all the important files, etc.

How do I go about this? I don't remember XP asking whichhard drive to format.

Thanks in advance.
 

A:Format corrupted Xp D drive not XP C drive

Read other 16 answers
RELEVANCY SCORE 38.8

I have a second hard drive, which I recovered a deleted file into. I went into the find the recovered file, but it wasn't there, even though it used up a few gigabytes of space. I'm now frustrated, and I want to format the drive. It kept saying "being used by another process" or something like that, anyways, I went into the hard drive and deleted everything myself. The hard drive is now empty, but it still has about 16gigs of space being used, even though the drive is completely empty.

The software I used to recover my file was "Recuva". I uninstalled it, so it shouldn't be interfering with the formatting. Is there anyway to force format the hard drive???

Please help!

Thank you.

A:Cannot Format D-Drive (2nd hard drive)

Use your Windows install disc. When it gets to the point where it ask you where you want to install Win 7 indicate that drive. Then format the disc. Now exit the installation. If you cannot get that one to work then attempt it with a XP installation disc.

Another way is to go to your Control Panel and choice Administration Tools then go to Computer Management. From there go to Disk management. Once there right click on the Drive then click on Delete Volume. Once that is done, reformat. Hope this helps.

Read other 9 answers
RELEVANCY SCORE 38

I want to format drive C of my desktop and re-install all software.
Windows message is: "Windows was unable to complete the format"
The desktop runs XP with Service Pack 3.

Any ideas, please?

A:Format drive C

Hi NJAPAUL,

First thing, please post your computer hardware specs. Posting computer specs definitely helps troubleshoot computer issues more efficiently. May I ask, do you have a desktop or a laptop? Hope everything works out well for you.

Read other 3 answers
RELEVANCY SCORE 38

i received this computer from someone and it is only a 4 GB hard drive and the only free space i had left on it was about 565 mb .i freed up around 2 gb worth of space on it and then up graded to windows xp home edition.after doing this i literally had no space left.i found files on it still for windows 98 se and i deleted them and it freed up 1.17 gb .i have decided i want to format my hard drive and i tried by right clicking on my c drive and pressing format and i get a message saying that i cant format the drive.i went on all kinds of help sites and eventually found out i can try to format from a windows xp start disk so i tried that and it wont let me delete the partition .i am at wits end with this and if i dont get it the way i want it soon my foot may go through it . thanks for all your help!! : )
 

A:cant format my c drive

4GB is too small for Windows XP. Just the OS requires 1.5GB. If you install a few programs you're going to be out of space fast. I would also suspect that if that's the hard drive that came with the system, it's generally underpowered (processor, memory, etc.).

If you really want to try, boot from the XP CD, delete all partitions, and create a new one. If this doesn't work, provide specifics on what error message you receive.

You can't format the hard drive from within Windows. That's like digging a hole under the ground you're standing on. Can't be done.
 

Read other 1 answers
RELEVANCY SCORE 38

My system got infected with some kind of virus, which severely slowed down the PC and caused me a lot of frustration. So I simply installed Win 7 on my H: drive. Now I want to completely format the C: drive, the location of the previous Win 7 install. During the install itself, for some reason there was no option to format the C: drive and re-install the windows there. And now that I'm trying to format C: drive, I get an error message: 'Windows was unable to complete the format'.

How can I wipe clean the C: drive and keep it for general use, with the Win7 now on my H: drive? I'd appreciate any help.

A:Want to format C: drive

DId you boot to the W7 dvd or did you start the install from within Winidows?

Read other 4 answers
RELEVANCY SCORE 38

Hello,

I'm stuck trying to format my usb drive. It will not format under hard drive management, and I also tried to clean it using disk part. I attached photos of what I have done so far, and now I'm stuck. Any help will be appreciated.

Thanks
 

A:USB Drive won't format

Read other 7 answers
RELEVANCY SCORE 38

Have an external WD USB/Fire Wire Combo drive. The 120GB IDE drive failed with constant clicking sounds when powered and a failure to load the USB driver. I opened the case and replaced the WD1200 with a new WD200JB IDE drive. The drive now loads USB correctly and appears in disk management as unformatted. When I proceed with formatting it either fails as incomplete or forever reports formatting but no hard drive activity is taking place. I have tried connecting it directly to the IDE connector on the motherboard and have the same result.
 

A:USB drive will not format

Sounds like the new hard disk might be faulty. I'd recommend you get a replacement from the place you purchased it from.

Especially if it will not format when connected via the motherboard using a PATA connector.
 

Read other 5 answers
RELEVANCY SCORE 38

Hi

what i have here is a 1.5tb drive containing 3 unallocated spaces that i cannot get rid of

i have tryed all normal fresh install delete partition theory/s but as the not partitions they do not delete

any clues ??

cheers
 

A:cannot format drive

Read other 9 answers
RELEVANCY SCORE 38

I have a 10 year old notebook that I'm running XP on. I want to re-format the hard drive to load win98 on to it to run some older programs. How do I exit windows and get to a DOS prompt? Microsoft said to run the set-up disk but I upgraded and did not get one. I can't find the "recovery" program.
 

A:Format XP drive

Read other 7 answers
RELEVANCY SCORE 38

I dual boot and I feel that my partitions are in a bit of a mess.

Also - my partitions are not aligned correctly according to this tutorial that I followed. The reason why I know this is b/c I hit the Start menu and typed in msinfo32. Then Components > Storage > Disks. My SSD was on the list and on the "Partition Starting Offset" item the number was NOT divisible by 4096 (that is, if dividing it by 4096 equals a whole number and not a decimal).

The article - (from lifehacker ) suggested that my partition is correctly aligned.

Does anyone know what I would need to "start all over again"

Can I just simply wipe the drive or re-fomat it and enable trim and all the other suggested tips then re-install the OS's? (W7 and Linux)

THANKS - always get great help here thanks

A:Re-Format a SSD Drive - anything I need to do?

Excellent tutorial here: SSD / HDD : Optimize for Windows Reinstallation

Read other 3 answers
RELEVANCY SCORE 38

I have had problems with my Windows 7, which is shown in this part of the forum, so I want to fully format my hard drive to start over.

I have been told by a seasoned software professional with over 40 years experience, who states that this has something to do with a Windows 7 update due to the fact this problem is only recently happening to me, to format via command prompt but the system will not let me format the partition.

"System partition is not allowed to be formated."
Contacting Microsoft directly has proven useless and it seems I am not the only person complaining about this very same problem.

Since end of November 2015 my Administrator privileges are no longer sufficient to play games and an account called Administrator now shows on the log in screen, which I did not activate nor can it be deleted or protected by password.

The games I want to play installed fine and played fine until the end of November 2015, this Administrator account was never before seen on my log in screen before November 2015.

Event logs show no reference to Administraor log in except on 2 occasions when I logged into the account myself to see if I could delete it or create a password..

Can anyone help?
 

A:Cannot format C Drive.

Read other 7 answers
RELEVANCY SCORE 38

My D Drive apparently has a System partition. I cannot format the drive. There are three folders on drive backups, Wiindows, Program Files. These files are leftovers from a former PC. I have logged into D as an Administrator. When I try to format, I get message that System Partition cannot be formatted and the process stops.

Can someone tell me how to format this drive. Thanks.

A:HELP-Cannot Format Drive D

Hi denneny

Can you upload an image of the disk management

Disk Management - Post a Screen Capture Image

Read other 9 answers
RELEVANCY SCORE 38

i have a 80g hard drive, with alot of importaint info on it, for some strange reason when booted my computer up today and tried goin in the drive. it said disk not formated do u want to format. i have not installed anything new so i dont know what the problem is. the os is on the 40g.
need help please..........................
need help please..........................

xp pro ver. 2002
pentiun 4, 1.6Ghz
asus board, p422
512 rams
ata wiring
onboard sound
2 hard drive 1 at 40gand the other 80g maxtor
ati vid card all in wonder..
 

A:drive asking me to format,help...........

reboot in safe mode. go to the command prompt and type
chkdsk X: /f
where X is the drive letter for that disk
 

Read other 2 answers
RELEVANCY SCORE 38

I want to format my "c" drive i have done it in the past but have forgotten how can somebody help?

A:Format c drive

If you already have XP installed...
Go to My Computer, right click, format.

If you're installing XP, it should re-format when installing it.

Read other 1 answers
RELEVANCY SCORE 38

SOS....I was wondering if anyone could help me? Im a newbie so bear with me, My Dell dimesion 2400 desk top has caught loads of virus's , i managed to install Adaware and Spybot in safemode/normal mode but it won't let me open the programmes or if it does it scans so slowy up to 2 hrs to finish, says its found and deleted the virus's but when i boot it up their still their and its becoming more and more slow.

I then tryed to remove the hard drive and connect it via a IDE interface with a usb on the other end to remotly scan it from my laptop, but when I went to open up the case Dell have glued the screws so iam unable to remove it.

I bought the computer a few years ago second hand and it came with no other disks, so i cant do a recovery/repair with a windows disk. My question is(sorry to be long winded) if i buy a copy of windows xp OEM can i just put it on? or would i have to format the drive first(which im gussing i should do) how do i format the hard drive if i cant remove it???...if any one can help with some ideas or what software to use in order to do this would be great

A:xp oem? how do i format my drive ?

The XP cd will format the drie before it install a new copy on your hardrive

Read other 9 answers
RELEVANCY SCORE 38

hi ..i wanted to get help. i am not able to format my C drive which initially had VISTA and now i have installed windows 7 in d drive ... i want to format my c drive .. i am not able to do that coz my lenovo x 61 doesnt have a cd drive so that i can boot up from the Xp or vista cd and format the c drive .. also . i am not able to boot from my USB flash drive and my external harddisk ,,i dont knw i found several sotwares online and some forums that told me how to make ur flash drive work i ve certainly not got help from any of them
can anyone help me FORMAT my C drive ... windows cant format it as m running windows 7 ..it shows that c drive is primary and i have another drive thats hidden thats 6 giga .. that has some inbuilt data recovery thingy ... i want my c drive all clean ...so that i can save my files in it ... i dont knw nothings getting booted up from flash drive .. is their any commands in Dos or Cmd that cn format the drive
pls help
djinxs
 

A:Cant format c drive

Read other 10 answers
RELEVANCY SCORE 38

I have an external hard drive which I want to format in the FAT-32 mode, which I believe is necessary in order to use it as a source of audio files for my car stereo, which has a USB input (I'd be using an AC inverter to power it).

Can anyone give me any pointers on this?

Thank you,

Bob

A:How to format a drive in FAT-32?

just format the drive through disk management. You can format it as fat 32 there.

Read other 3 answers
RELEVANCY SCORE 38

my laptop has 1 hard drive that is partitioned in 2 c drive works fine e drive was stopping me from deleting anything from it tried everything so last resort format it so windows started formatting just about to finish and it failed now it wont let me format it and when i went in to computer management it says it is a healthy primary partition drive but the file system is raw how can i get this back to ntfs

A:help cant format e drive

its not your recovery partition your trying to format is it?

Read other 5 answers
RELEVANCY SCORE 38

I just got an A31 (2652 J3U) from an IT guy who thought he was helping me by installing Tiny XP, a smaller, quicker version of XP, this OS is useless, so I want to install my legal XP Pro Corporate SP1, but I get a mesage that I cannot install it because my version is older than the Tiny XP currently on my A31. I assume that I will have to format my "C" drive then begin from scratch. I am not much of a techie, a newbie on the A31, so can you explain to me in simple point form how to format the "C" drive on my A31? I assume after the formatting that I will start my machine using F12, then select the CD as the first boot hardware, then the XP Pro install window ought to open up automatically from which I can begin the install process. I also got all the drivers  for this A31 model from the Lenovo site, assume that I will install those after installing XP Pro, then install all my security software, then install all the updates from Microsoft. Am I on the right track? Will this work? Thanks, Ken.

A:Format A31 "C" Drive

Any XP installation disk should have the ability to format the drive as a part of the installation process.

Read other 1 answers
RELEVANCY SCORE 38

Can anyone tell me how to format raw drive. one of my hard disk has accidentally turned into a raw drive. Now when i m trying to format it, its not happening. tried with bootable cd, doing a right click and going to adminstrative tools in control panel. Any software that can help me to format that? Help will be greatly appreciated
 

A:how to format raw drive

It can't be formatted until it is partitioned first. There is nothing there to be formatted.

Use Disk Management.

Right-click Computer > Manage > Disk Management.
 

Read other 1 answers
RELEVANCY SCORE 38

hello
i'm planning to do a clean install
when i format my C:\ drive in the install process, do my bios settings stay the same?
thx!
martin

A:format c drive

Hello Martin,

Yes, the BIOS settings will stay the same since they are stored on a chip on your motherboard instead of the HDD.

Clean Install - Windows 8

Hope this helps,
Shawn

Read other 6 answers
RELEVANCY SCORE 38

I'm attempting to format my hard drive by booting up using a windows xp disc, and entering the recovery console. After the drivers and such have loaded up and I enter the recovery console, I type "format c:", it asks me for confirmattion and I type yes. When I press enter, the screen looks as though it is loading for a second but then just returns to the recovery console without having done anything. I try typing the command in again and again nothing happens. When I reboot the computer, my hard drive has not been formatted.

How can I get the recovery console to actually format my hard drive?
 

A:format c drive

Read other 16 answers
RELEVANCY SCORE 38

Hello,
Here is my problem. When i want to format my USB pendrive, the message shows "The disk is write protected".
I tried the registry method and problem not solved. Any other method to figure out? Thank you for your response.

A:Can't format my USB pen drive

Hi maafia

Did you go to this registry


Code:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

Double click the key WriteProtect in the right pane and set the value to 0
In the Data Value Box, press OK
Exit Registry, restart your computer and then re-connect your USB pen drive to your computer.

Read other 1 answers