Over 1 million tech questions and answers.

HP Deskjet 3050A J611a series not downloading for Windows 10

Q: HP Deskjet 3050A J611a series not downloading for Windows 10

I have Deskjet 3050A J611a series and my operating system is Windows 10 64 bits. I have found the link to download driver for windows 10 but it does not download. The link is as follows:- http://support.hp.com/us-en/drivers/selfservice/HP-Deskjet-3050A-e-All-in-One-Printer-series---J611/... It rightly detects the operating system and then gives two options viz 1. Cancel 2. Change but does not give any option to download driver for windows 10. And underneath it another message shows up:- We were unable to retrieve the list of drivers for your product. Please select the desired operating system and select ?Update? to try again. Let me mention here that I log on to my laptop with Administrator rights. Please help. Thanks

Read other answers
Preferred Solution: HP Deskjet 3050A J611a series not downloading for Windows 10

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)


My husband and I just bought a HP 3050A Deskjet printer. We do a lot of scanning and the scan-preview window is so small it's impossible to see to modify the settings (such as brightness or contrast). Often we scan documents with small writing or hand-drawings where without tinkering with the settings nothing is legible.

Is there a work-around for this or some way to zoom in on the tiny scan-preview window? Thanks.

A:Solved: Scanning in HP 3050A Deskjet

Here is the support site for the HP Deskjet 3050A e-All-In-One printer.

The "Solve a problem" and "How to" sections may be helpful to you.


Read other 2 answers

Brand new Dell with Win 7 Home pre, Brand new HP 3050a. Printing from a call reporting application. Some print jobs make it through but more often it will print three or four pages and crash. I've attached the .dmp files from my troubleshooting session. Any help reading these would be greatly appreciated. Thanks!

A:BSOD when printing with HP deskjet 3050a

Welcome to Sevenforums

Your USB 3.0 eXtensible Host Controller driver is the cause, you should update it:

BugCheck 1E, {0, 0, 0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\iusb3xhc.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iusb3xhc.sys
*** ERROR: Module load completed but symbols could not be loaded for iusb3xhc.sys
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+100 )

Followup: Pool_corruption

fffff880`0490b000 fffff880`049cf000 iusb3xhc T (no symbols)
Loaded symbol image file: iusb3xhc.sys
Image path: \SystemRoot\system32\DRIVERS\iusb3xhc.sys
Image name: iusb3xhc.sys
Timestamp: Mon Feb 27 14:56:53 2012 (4F4B6175)
CheckSum: 000C5E11
ImageSize: 000C4000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Read other 2 answers


just got the new HP Deskjet 3050A wireless printer installed this weekend. everything works great, love the printer so far.

just for the life of me can't figure out where to turn of printing of the url, document name, and page numbers? i used to be able to find this stuff easy but this new wireless printer is a little different, i've already tried looking through the advanced printer settings in the control panel.

thanks in advance!

A:how to turn off printing url and page numbers on HP Deskjet 3050A

so i figured out how to turn it off in the programs and browswers themselves but i sure thought there was a way on the printer to change the default so you don't have to change it in every program?

Read other 1 answers

When I print any document the printer feeds a page through the printing head but does not try to print anything. When trying to print a test page I get the message that the test page failed to print but a page is again fed through the printer. The printer status shows 'deleting' but does freezes in this status. I am running Windows XP Professional and have also been through the help actions but have been unable to solve the problem. Any ideas?

Thanks Dave

A:HP Deskjet 5550 series

Read other 7 answers

has anyone had trouble with hp deskjet 1050 all-in-one 1410 series printer not lighting up when you press start button. 

Read other answers

My printer's power button always blinks and everytime i start printing, it always says that the printer is offline and the active printing documents are all paused whereas when i check it in Devices and printers, it can read the printer and when i troubleshoot it, it states that the printer is off. i don't know what's the problem because it only started when i upgrade my o.s to windows 7 but when i bought that printer i was using windows xp.... it turned out that i encounter this kind of problem when i'm using windows 7 but i also encounter this when i used windows xp but not that serious to the extent that it's not printing at all.
By the way, i've been using this printer for more than 3 years. Thanks and hope you can help to solve this problem. ^^

A:HP Deskjet D2400 Series Printer Compatibility

Checking out HP's support/driver download site for that printer there seems to a few models of that printer. Have you uninstalled the printer driver and software and reinstalled it using, if available, windows 7 software and drivers.

Looking further, it seems all the listed printer models all have windows 7 versions. Do you have the right bit version installed?


Read other 7 answers

I'm trying to check the ink levels for my printer. For HP Deskjet 1000 J100 series. I've installed and set up the printer but don't know where the control panel or HP toolbox is. I opened the HP Deskjet icon, but the only thing that opens is a window asking if I want to install a new printer. I opened the HP Smart app, and the printer says that it's Ready, but when I click on printer settings, then print quality tools, it says "This feature is not available for your selected printer through HP smart app. To check control panel."

I've been going around in circles trying to find the control panel or toolbox. Also, I've been using the printer for a couple of years now, with no problems. So it's hooked up correctly. It's only now I decided to use the Check Printer ink function.

Maybe I need to install another driver or something. All I want to do is check printer ink levels. Please help.

Thanks, Josie

Read other answers


I have been using the printer and all of the sudden it stopped printing, I checked what was in the printer queue and there was a file holding it up, I have tried to delete this print but it wont come out of the queue. What do I have to do?


A:Solved: HP Deskjet 1050 series printer problem

slambrosia, try hitting delete and then reboot the computer and see if that takes it out.I had to do this to an Epson printer I use to have.Good Luck, Bob

Read other 2 answers

Here is the solution if you want to install your HP Deskjet 3600 series
(mine is a HP deskjet 3647) on Windows 7100 RC 64-bit

1) Click on the windows-button ("start"-button) en click on "Devices and printers".

2) Click "add printer" on top of the window

3) Click on "add local printer"

4) Choose "use an existing port" and choose "USB001 (virtual printer port for usb)" and click "Next"

5) Click on the "Windows update" button

6) Wait, this will take a while!!!

7) Choose "HP" as Manufacturer, "hp deskjet 3600 (LIDIL)" as printer

8) Attach the printer and click ""Print test page" to test printer.

9) Your done!

10) This works also for network printers!

A:HP Deskjet 3600 (3647) series driver (Solution!)

Welcome aboard wolf7.

I concur. Installing the driver that matches your hardware is a long standing solution that few users are aware of.

Read other 5 answers

Yeah, so I have an HP Deskjet 1050 J410 Series printer. It is not printing complete pages, it is cutting out complete lines on the pages. I just opened the box and installed everything yesterday evening, so its not like it's clogged or anything. I cleaned the cartridges just to be sure, but it still cut out lines on the test page. I am using the ink that came with it and regular printer paper. I have an HP computer as well, running windows 7. I do not know what is wrong, so I was hoping you could help me. I am in college and really need to be able to use this printer.

Thank You.

A:HP Deskjet 1050 J410 Series printer not printing every sentence

Sounds like faulty hardware. Perhaps electrical contact between the printer and cartridge gets dropped.
I have a Deskjet 1055 since July 2011 and have never experienced what you see.

I'd return it.

Read other 2 answers

Hello I am new to Tech Support Guy and hope someone can help. Sometimes when downloading using uTorrent my download speed disappears completely. Why is this and what can I do about it? Thanks.

A:downloading TV series

as you are new and recently signed up - you should have read the rules and agreed to them
you would have seen we are unable to help with utorrents

closing post

P2P and File Sharing - We do not support P2P file sharing applications or web sites where the aim or much of the content is illegally shared copyrighted music, videos, or other files. This includes torrents, Kazaa, LimeWire, RapidShare, Pirate Bay, and the like. Any threads requesting help for such will be closed. Obviously, this does not include legitimate sites like YouTube, Flickr, Vimeo, Metacafe, etc, that have a strong content policing policy. If you're interested in the topic of P2P, you are free to discuss it on our site, but information on how to use these services will not be provided.Click to expand...

Read other 1 answers

Kindly supply information to properly download photographs to the Laptop Computer

Read other answers

Asus CM5675-09 Computer Essentio Series with Windows 7.

I get an error message when trying to download DirectX 9 on my new computer. I get this error message:

A cabinet file necessary for installation cannot be trusted. Please verify the Cryptographic Services are enabled and the cabinet file certificate is valid.

How do I do this?

Thanks, in advance, for any help you can give me.

A:Error downloading Directx 9 on new Asus Essentio series computer

Hello Catherinechapman! There shouldn't be any need to download DX 9 to your computer. Windows 7 has native support for Direct X 11, and it includes backward compatibility for earlier versions of Direct X. If you have some software that keeps giving you an error saying that it needs DX 9, it probably isn't compatible with Win7.

Read other 2 answers

So i want to remotely print from my Windows 7 laptop to my shared HP 5740 on my Windows XP desktop. It prints backwards no matter what.
Even if i enter print settings (in adobe reader) and select reverse pages or mirror image,

Option 1: Uncheck Reverse Order, Uncheck Mirror Image = prints backwards
Option 2: Uncheck Reverse Order, check Mirror Image = prints backwards
Option 3: check Reverse Order, Uncheck Mirror Image = prints backwards
Option 4: check Reverse Order, check Mirror Image = prints backwards

I would post screenshots here but this stupid site only allows images from url and it doesnt work when you do

please let me know thanks

A:Printer HP deskjet 5740 on Windows XP prints backwards from remote Windows 7 laptop

Hello, and Welcome. Can you post this at the sister site of Windows 7 Forums : Windows 7 Forums
I think they are better able to assist you. Thanks.

Read other 7 answers

oh hello, Windows Seven Forum.

Well, i just bought both a new laptop and a new printer. the laptop being a HP Windows 7 64 bit, blah blah. and the printer/scanner being the Deskjet 1050.

Nooooow... i popped in the installation disk and... well, i won't install. it says "Installation Error: The Windows Installer Service cannot be accessed".

now I've Googled like crazy and nothing seems to solve the problem. I've gone to the HP website and downloaded the appropriate drivers and tried using that instead of the disk and just the same exact thing happens, "Installation Error".

so... does anyone know anything that can help?
Also, suddenly, I can't seem to download the new iTunes update either so... yeah. My laptop isn't being very helpful.

A:Deskjet 1050 and Windows 7

Hi scruffy17yo, Welcome to the forums, have you tried this Driver Install - Add Printer Wizard also remember not to attach the usb cable until instructed to do so

Read other 3 answers

Help..  I had Windows 7Pro and in August I upgraded to Windows 10.  The download went ok. I didn't use my printer untilthe other day and it is not working.  I did download the newest drive for the F4100 Series and my print still didn't work. All lights go on and the ink cartridges flys back  and forth several times and makes all kinds of noise. I have tryed every thing I can  to find out what the problem is with the printer. But before I go and replace it and I think I have to I would like to know if it is compatiable with Windows 10.  If it is then the printer is broken and I will need to replace it.  Is there another Deskjet printer that uses ink number 21 and 22 in it because I have 4 new ink cartidges? Could you please give  the model numbers so I can purchase a new printer. I thank you in advance for your help. SweetPea71


View Solution.

A:hp deskjet F4140 and windows 10

SweetPea71, welcome to the forum. Here is the latest Full Featured Software and Printer for the printer for Win 10.  Once you install this software and driver, you should reinstall the printer. Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.

Read other 5 answers

I have gone to the HP website and they stated that Windows 7 would load these drivers for the printer. No results. I have reloaded the disk that came with the printer and Windows 7 will not acknowledge the drivers. I am running Windows 7 Home Premium, 64-bit operating system. Thanks for any help with this issue. pasar

A:Need Windows 7 drivers for HP deskjet 3915

According to the HP web site, the HP Deskjet 3915 Color Inkjet Printer drivers are included with Windows 7. However, some features of the printer may not be available.

Read other 3 answers

I can't get my HP Deskjet 3050 to print.  It acts like it is printing but only blank pages come out.  Yes I have tried two full toner cartridges.  Help

Read other answers

Hello everyone,
Ok, basically I have an HP Deskjet 656c (also known as the apollo 2500/2600). The problem I have is that it will not print anything when running on the Windows XP O/S. I used to have it hooked up to my ME O/S machine and it worked fine. When I attempt to print off of any word processing program (even notepad) the printer just sits there, and it doesn't even get pooled. When I run it inside of the print assstant it feeds the paper through, and nothing is printed.

- I assumed that the driver CD that came with my printer, was for windows 95/98/ME/Millenium...SO I went to the HP site and downlaoded the driver that stated it was for the Windows XP O/S. I did a complete clean installation of it, following the onscreen and websites instructions. The same problem above had occured when I tried to re-print..

So basically I am not sure if it is my computer, O/S or the driver file?

Sorry for the long read, hope it was clear enough to understand...if not just post and Ill clarify anything

Thanks for reading!

P.S - I am running Windows XP Professional, and when I say clean install I mean removing it from add/remove, deleting it from the printers/faxes and also deleting files in the Program Files folder

Read other answers

I have a user who has a the printer stated in the title. I know that i am suppose to use the deskjet 990c driver in place of the 6122. Windows does not have this driver by default even though it is suppose to. So what i have done in the past is hit Windows
Update when Adding the printer and the 990c driver will then appear. For the past week everytime i click Windows Update i receive the following message: "Windows was unable to get a list of devices from Windows update. Please try again later". This is not
the first time i have had to install a 6122 on a windows 7 machine. I need the updated driver list.

A:Installing an HP Deskjet 6122 on Windows 7 64 bit

If you can deal with a cabinet (.cab) file, it's available for download from the Windows Update Catalog:

Read other 4 answers

Moved from windows 7 to 8.1
Now not able to install driver for the HP deskjet 6980.
followed the wizard (add printer) and used windows update, showing the printer, but refuses to install.
The msg: windows can not find suitable driver, despite the driver was on the windows update list, and the cmd screen flashes for two seconds, hence not able to see what is says.
Any idea as how to install this driver?

A:Windows 8.1 & HP deskjet 6980 driver

You have to use the 8 drivers from what I can see. This may also help: Windows 8 Update Failed to Install the Driver HP Deskjet 6980 Printer | HP? Support

Read other 3 answers

Hi, I keep getting the following message when I try to print to my HP Deskject 842c from my Windows ME computer.

"There was an error writing to LPT1: for the printer (HP Deskjet 840C series): The printer is not ready. Make sure it is turned on and online. To continue printing click retry. Windows will automatically retry after 5 seconds."
Now the background. I've always had this problem, but to fix it, I would just unplug and replug the USB to my computer, then print again. I got sick of that and in my infinite wisdom decided to download the latest driver from HP's website and install it, thinking maybe that will take care of this minor workaround. Well now I can't get it to work at all. I've followed every HP suggestion step by step from their website about uninstalling/reinstalling. Nothing works. It's listed with no problem on device manager, the printer cable is fine, the printer is on, etc. I've gone through this at least 10 times over the past few days thinking maybe this time it will work. Tonight I even did a system restore back before I downloaded the new driver. Still nothing. I'm out of ideas. Any suggestions?

Thanks in advance for your help,

Read other answers

I know this printer is not supported by Windows 7, but is there not a basic print driver that will work with Windows 7 Home 64-bit?

A:HP Deskjet 682c driver for Windows 7

I found something,click this http://ftp.hp.com/pub/softlib/softwa...-1/dj502en.exe.
Download it,run\extract,click disk1\nt4,click on the hpfsplsh,Install HP Deskjet.
You can try also to run the setup in compatibility mode (view attachment).
Give it a try and post back with results.

Read other 9 answers

can any1 help provide a link or website? thanks in advance...

A:i need driver for hp deskjet 1280 windows 7 os

Here you go. You'll have to select your OS from the list below before you can download.
HP Deskjet 1280 Printer series*-* Download drivers and software - HP Business Support Center

Read other 1 answers

I have a Fujitsu Lifebook AH531 (Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 4008 Mb
Graphics Card: Intel(R) HD Graphics Family, 1812 Mb
Hard Drives: C: Total - 455815 MB, Free - 405703 MB; D: Total - 476937 MB, Free - 359600 MB;
Motherboard: FUJITSU, FJNBB0F
Antivirus: Norton 360, Disabled)

I also have a HP Deskjet 3070A. I have been using this for around a month and it has worked fine. The other day, Microsoft Word 2010 said that I had no printers installed. However, the software was in my program list (it wouldn't let me reinstall OR uninstall the software). After researching for hours, I found my print spooler wasn't started and my flatmate managed to sort this. However, the next day, upon turning my laptop off, it decided it needed to system restore. The printer was then apparently not installed again (even though the software was still in the list and kept failing to do anything). Got my flatmate to fix it again, and the same thing happened. It is now the 3rd time it has happened.
I'm quite useless with computers, but I NEED the printer for my university course as our library costs a fortune to print and I have coursework that needs to be finished and printed by the middle of next week (and I can't afford to pay anyone to fix it).

Please help.

Read other answers


I'm trying to get my printer to work on my laptop with windows 8.1 pro 64 bit.

Here are the deafult port settings after it self installs.

When I run the HP print and scan doctor it says:
I've done this and it hasn't solved it!

What is the correct port to solve this port mismatch?

Any help is appreciated.

Many Thanks.


A:HP Deskjet 450 Printer Can't Connect To Windows 8.1

The installer will figure it out when the printer is connected during installation.

Read other 2 answers

Is the HP deskjet2549 printer compatible with windows 10


View Solution.

A:Is deskjet 2549 compatible with windows 10

@kingpin300800 W10 software and drivers here. http://support.hp.com/us-en/drivers/selfservice/HP-Deskjet-2540-All-in-One-Printer-series/5295960/model/6453728 REO

Read other 2 answers

Hp doesn't make a driver for windows 8.1 so is there any other ways to make it work with it? It would suck if i can't have it pla nice with 8.1 because I would have to downgrade back to Windows 7 .

A:I need to get a HP Deskjet 3820 working on Windows 8.1 64.

Use the Windows 7 64 bit driver, it should work okay.

Read other 2 answers


I have a HP Deskjet D1660 Series Printer, which on an XP operating system I had no problems with at all.

I came to install this printer on my 64-bit operating system Windows 7 netbook and cannot do so.

I entered the CD and soon realised that I needed a different driver for windows 7, proceeded to download this driver, but when I open the .exe file, it tells me it's extracting, which it does to 100% and then nothing happens.

I have tried using the HP installation wizard, and a similar thing happens - the program recognises my printer, downloads the relevant driver for me, tells me it's extracting it, but then takes me back to the start; identifying my printer.

If anybody knows of anything that could help I'd be very grateful!


A:HP Deskjet D1660 printer will not install on Windows 7

That's the correct full feature driver software package for Windows 7(64-bit).

Are you downloading and SAVING it, then closing all open windows first, then double-clicking it to install it?


Read here for installation instructions.


Read other 3 answers

Okay I have a user that used to have an HP 5600 series USB printer. This was giving her problems (on both a parallel port and on a USB port). So she went out and bought a HP 6127. Now I have installed printer drivers 100's of times over without a problem (especially when its from a CD supplied with the printer). This time I followed the instructions and I get to pick the drivers and it starts to copy the files and it goes ot the following error.

Cannot Install this Hardware
There was a problem installing this hardware
HPDeskjet 6127
An Error Occured During the Installation of this device.
The I/O operation has been aborted because of either a thread exit or an application request.

I have done google searches and checked the HP website an found nothing. I know the USB portion is working fine because i have a USB mouse in one port and have even swapped it to make sure its not the port. As well I uninstalled and reinstalled the USB printing service from the Device manager with no change in the error. There are no other local printers but a bunch of network printers none of them on local ports. This 6127 does not have any parrallel connection so I can't even change it to see if its a bad port on the printer side.

Any other ideas?

Read other answers

My laptop has Windows Vista Home Premium installed and I can't get it to print to my HP Deskjet 995C. When I try to print, I get a 0.0000007a error message. HP website says this printer is not supported in Windows Vista. Is there any way I can work around this or do I need to go out and buy a new printer?

A:Can't print to HP Deskjet 995c from windows vista

Have you installed drivers for the printer? I think one of theses is your printer and vista drivers are available http://h20180.www2.hp.com/apps/Look...1&h_query=Deskjet+995C&submit.x=10&submit.y=7

Post back if it still doesn't work.

Read other 1 answers

I am looking for HP Deskjet printer driver for windows 7. I have a lot of cartriges #21 and 22 left. Please help

Read other answers


Can anybody please help!!!

I am having Windows 7 OS in my laptop. Tried to connect HP Deskjet 610c printer with the laptop using cable wire. In Windows 7, I searched for Windows update and it recognized the said printer. Now, the printer is added and I am also able to print the test page.

Now, the problem is- if I am trying to print any other document (File--->Print) then the printer prints some special character #$% etc instead of printing the document properly.

I referred the following link-


What will be the solution for this?
can anybody please tell the detailed steps to connect HP Deskjet 610c printer with WIndows 7 OS?Thanks.

A:How HP Deskjet 610c printer works with Windows 7 OS

Welcome Sarita to the windows 7 forums.

When you say you connected the printer via a cable wire. Did you mean via a USB cable?

Also, did you download from HP the proper drivers for you version of windows 7? ie 64 bit windows 7

Also, many times, before you connect any usb printer, you should install the proper software
and then when It asks you, then plug in the printer and turn it on.

This usually installs the printer correctly.


Read other 4 answers

Hi, all.

Thanks to those who helped me decide what I was ultimately going to do about my old Toshiba laptop and upgrading to W10. I've replaced it, and am now using a newer Toshiba with W10. Things have been going well, and I'm impressed.

I upgraded to 10586 yesterday, and Windows Update informed me that I need to update the drivers for my printer. My printer software hasn't said anything, though. When I try to install the update, WU throws Error 0x80240017. I've restarted the update process multiple times, although I haven't stopped the services and deleted the contents of the Software Distribution folder. I ran the Microsoft WU troubleshooter, without it throwing anything up.

Is this a major issue, or will it clear when there are other updates available?



Read other answers

Since upgrading to Windows 10 , my HP Deskjet 2050 all-in-one J510 the outputs starts printing as usual but stops on the first page with only about 1/3 of the document printed.

A:Deskjet 2050 not working with Windows 10 upgrade

Hi,Please use the following instructions to fix:     http://support.hp.com/nz-en/document/c04714314You may have to re-install software and drivers.Regards.

Read other 1 answers

Hp shows a Windows 7 driver for the HP Deskjet 710C printer.
Will this driver also work for the HP Deskjet 712c? Thanks for
your reply.

A:Windows 7 driver for HP Deskjet 712c printer...

Welcome to Sevenforums, Gary
It has been said that some printer drivers will work on different versions of printers. Give it a try to see. You may have to just use one for your own model that is not for 7. To do this run it in compatibility mode. Good luck to you and Enjoy 7 and SF.

Read other 5 answers

Hi I recently updated my Windows 8 to Windows 10. I also downloaded the new driver ( Just really not sure if this driver is for Windows 10). And now my printer cannot be detected by my Laptop. Pls Help Thanks


View Solution.

A:HP deskjet 1015 wont work on windows 10

The full solution software includes everything you need to install and use your HP printer. This collection of software includes the complete set of drivers, installer and optional software.File name: DJ1010_188.exe Alternately, The HP Printer Install Wizard for Windows was created to help Windows 7, Windows 8/8.1, and Windows 10 users download and install the latest and most appropriate HP software solution for their HP Printer.Simply run the tool and follow the on-screen instructions.File name: HPPIW.exe

Read other 3 answers

I have tried a lot to install hp deskjet 845C printer on windows 7, but not succeeded. Any one can help me plz. Is there my hp deskjet 845C printer is useless after installation of windows 7?

A:Help needed to install hp deskjet 845C printer on windows 7

Hi there ... Read the Link below .. If you follow the Instructions you should be able to get your Printer Installed ...

Installing the Printer Software in Windows 7 for a USB Cable Connection HP Deskjet 845c Printer | HP? Support

Read other 2 answers

Hello all

I''ve tried to install this printer to an Acer 2.8G machine running WinXP with MS Office 2003. The wizard said if USB that Windows would automatically install it., and duly reported it as being installed. Unfortunately nothing prints, the printer goes through the motions, but a blank page results. It shows as being installed.

Any ideas - thanks

A:Solved: Problem adding HP Deskjet F2100 - Windows XP

Uninstall using the uninstall utility on the CD HP provided with the printer.

Please see:


Read other 2 answers

Is there any way or any work around to get the HP Deskjet 1000 j110 printer to work in Windows XP 64? HP says the j110 is not supported for xp 64 but I was wondering if anyone had messed with this and figured a way with some other drivers or some way to make it work in the os xp-64?

A:get the HP Deskjet 1000 j110 printer to work in Windows XP 64

If HP doesn't have the drivers, then you aren't likely to find a "work around". I've seen drivers hacked to correct problems or enable features, but I've not seen drivers created for non supported hardware.

Read other 3 answers

Vega3,8,10 natively support HDMI 2.0b with HDR. But Lenovo write in psref for Ryzen series support only for HDMI 1.4b? Why? And how is this possible? After all, in order to get HDMI 1.4b from 2.0b, you need to unsolder a special chip converter from 2.0b hardware protocol in 1.4b(downgrade!). Which is absurd in essence. Moreover, customer reviews already confirm that versions with Ryzen give out [email protected] by HDMI, which on series with Intel UHD620 is not physically possible without soldering the LSPCON chip (by Intel datasheet for UHD620/630), but only in HDMI 2.0a (not log gamma data for HDR, as supported in 2.0b), which Lenovo does not soldered for the saving. But for what Lenovo writes lies in psref about HDMI 1.4b in versions with Ryzen , it is not clear to me, thus confusing buyers that thinking, then they will not be able to output movies in 4k with HDR and will not be able to connect 4k monitors @60Hz. Although all this will 100% work on Ryzen on HDMI, but 100% will not work on versions with Intel! It turns out that versions with Intel are flawed compared to versions of Ryzen. All Lenovo laptop options that do not officially have HDMI 2.0b and do not have DP1.2 support through, if this don't have a separate port for DP1.2(1.4 for HDR) or DP Alt Mode output via usb-c (DP1.2 and DP1.4 for Titan Ridge with TB3.0 support)...

Read other answers

After seeing the A/E485 keyboard issues, the reddit Thinkpad community investigated the remaining Thinkpad keyboards. We discovered that these other, non-A/E485 Thinkpad keyboards also have significant coalescing problems which scramble keys. A test program to quantify the issue reveals that keys closer than 23ms are scrambled. Many people collaborated over many machines to provide data. To easily see the problem, press "asdf" simultaneously, and note that "fdsa" will appear. It's much easier to type fdsa really fast than to type asdf fast, on a Thinkpad keyboard. We hope that this can be fixed because the E-series does not experience this issue. The trackpoint also has poor sampling behavior, with a 7ms internal sampling rate and a 16ms external sampling rate. This causes timepoints to be staggered in an uneven 10-17-17 manner. All T-series, X-series keyboards are affected, both Windows and Linux. That includes the 7-row keyboards.E-series is not affected.Nobody has yet submitted data for E/A485 either pre-patch or post-patch. We are interested in testers.External USB keyboards and mice not affected.Laptops from other manufacturers (Dell) not affected. Technical summary of the issue:https://www.reddit.com/r/thinkpad/comments/9j70v6/thinkpad_keyboard_firmware_worse_than_anyone/ Affected:T460s on windows and T480s on ubuntuT470T530T530 (2)X1Carbon Gen6Retro T25X220X250, X61, X220 Not affected:Dell PrecisionDell OEM USB keyboardLogitech keyboardE470E450... Read more

Read other answers

I have a set of HP Z210 Workstations with E3-1245-V2 Xeon Cpu's, SSD boot drives and varying sizes of memory from 8-16GB 1600Mghz DDR3 ECC. We use Windows 8 Enterprise for these machines, with Hyper-V enabled.
We get regular driver failures from the 2 sets of USB controllers on the machines (Mainly and issue for the KB & Mouse) that can only be resolved with a full power down (not restart) and a power up. This happens at least once every 1-3 days per machine.
I had gone through the HP support, but they have advised this isn't an issue on their side, and I had agreed all along. I was just hoping to get some traction by notifying them. Anyway, after a lengthy trouble shooting session, we found that once Hyper-V
was enabled, the fault arose.
As it was an Intel chip, they I asked them. They advised that on Windows 8, the drivers are supplied via windows update and that it was not their issue.
So, how can I get this resolved? Not through HP or Intel, surely through MS? Maybe not. Disabling Hyper-V is not desired as I the teams with these PC's are developers and require local visualization. Also, we have templates ready for Hyper-V, I don't really
want to remove Hyper-V and use Virtual box or VMWare workstation. but I am at wits end with the fault and lack of help from the vendors.
Please help.

A:Hyper-V causes Intel(R) Series/C200 Series Chipset Family USB Enhanced Host Controller driver to fail

I have found a work around for this fault with the USB failure - ENSURE YOU POWER  THE MACHINE OFF - DO NOT RESTART.
Its almost like the restart doesn't initialise the device correct, thus causing a failure. 

Read other 3 answers