Over 1 million tech questions and answers.

BSOD Driver Power State Failure whilst playing GMOD

Q: BSOD Driver Power State Failure whilst playing GMOD

Hello,

Ever since getting my New gaming PC (back a year ago) I have been getting BSOD for driver power state failure. These have been very uncommon but have recently sprung back up again.


I have attached the zip file from the debugging program I found on your forums.

I appreciate any help you can offer,

Thanks.

RELEVANCY SCORE 200
Preferred Solution: BSOD Driver Power State Failure whilst playing GMOD

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD Driver Power State Failure whilst playing GMOD

IT looks like your Problems are being cause by yourIphone/pod driver, and by your USB driver:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800a04cc80, fffff80000b9c518, fffffa8007397bd0}

*** WARNING: Unable to verify timestamp for usbaapl64.sys
*** ERROR: Module load completed but symbols could not be loaded for usbaapl64.sys
Probably caused by : usbaapl64.sys

Followup: MachineOwner
---------
Driver Reference Table - usbaapl64.sys

For the Iphone/pod driver try going to the device manager and uninstalling the driver from there, then plug the Iphone/pad back into the computer and it should re-install the driver for you

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800d6c5d00, fffff80000ba2748, fffffa80085a26b0}

*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : EtronHub3.sys

Followup: MachineOwner
---------
Driver Reference Table - EtronHub3.sys

Looking at the time stamp on this driver we can see that it is probably out of date:

Code:
kd> lmvm EtronHub3
start end module name
fffff880`04e9c000 fffff880`04ea5b80 EtronHub3 T (no symbols)
Loaded symbol image file: EtronHub3.sys
Image path: \SystemRoot\System32\Drivers\EtronHub3.sys
Image name: EtronHub3.sys
Timestamp: Wed Jan 26 05:54:00 2011 (4D3FFD48)
CheckSum: 00009F05
ImageSize: 00009B80
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update the driver from here: Etron Technology, Inc.

Read other 3 answers
RELEVANCY SCORE 118

Hi there,
Was just shocked to see my computer get its first blue screen. This is a new build with entirely new parts including HDD and everything.

This blue screen was as the title suggests and I am running Windows 64 bit and I have only recently done the latest windows updates, and had no problems until now, so there may be some correlation there.

I have attached the zip folder.

Any help would be greatly appreciated!

Kind regards,
Daniel

Read other answers
RELEVANCY SCORE 100.8

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 100.4

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 98.4

New Computer Setup. Seemingly Random BSODs several times a day.

At first it was just happening when playing games, or running AUTOCAD. But now it just crashed while watching Hulu. I tried reinstalling all drivers I could think of and even did a whole system wipe with no luck.. still BSing.



I've attached my Seven Forums .zip as instructed.

From Mini-Dump:
Loading Dump File [C:\Users\iJoeTime\Desktop\073112-12901-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`00210842?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`0175a212?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c3c0?
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03007000 PsLoadedModuleList = 0xfffff800`0324b670
Debug session time: Tue Jul 31 19:55:46.086 2012 (UTC - 7:00)
System Uptime: 0 days 22:31:20.914
Loading Kernel Symbols
...............................................................
................................................................
..................................
Loading User Symbols
Loading unloaded module list
..........
**************... Read more

A:BSOD - Driver Power State Failure

Please fill out your system specs. Click the link in my signature to do it.

Read other 9 answers
RELEVANCY SCORE 98.4

I've been dealing with random BSOD for months now when I sleep/hibernate my computer. Lately it has gotten quite bad and happens nearly everytime. I'm thinking it is a hardware issue, but I'm trying to rule out a software issue. I've tried to update every outdated driver on my laptop to the latest version. Nothing seems to help.

I've also run full hardware diagnostics/memory scans, and that doesn't reveal any problems.

Any help before I throw the computer out the window would be appreciated!

Thanks,
Michael

A:BSOD Driver Power State Failure

raterus, welcome to SF .

You mentioned several bugchecks occurring over a period of a few moths yet the file
contains not more than one dump file, if you have the rest please upload them as well.

As for the bugcheck in question.

The predominant driver of the stack is nvkflt.sys:


Code:
fffff800`00b9c4e0 fffff880`0470b854 nvkflt+0x38854
fffff800`00b9c4e8 fffff880`0470c938 nvkflt+0x39938
fffff800`00b9c4f8 fffff880`046f32d4 nvkflt+0x202d4
fffff800`00b9c518 fffff880`0470daa8 nvkflt+0x3aaa8
fffff800`00b9c520 fffff880`046f327c nvkflt+0x2027c
fffff800`00b9c580 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c598 fffff880`046e569c nvkflt+0x1269c
fffff800`00b9c618 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c630 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c638 fffff880`0470daa8 nvkflt+0x3aaa8
fffff800`00b9c648 fffff880`046e569c nvkflt+0x1269c
Driver Reference Table - nvkflt.sys

If we check it's time-stamp we can see that it is not inline with your description of the problem
being it is very recent.

Code:
Timestamp: Fri Aug 09 21:59:07 2013
Driver Version 9.18.13.2078
Download the latest version offered by your OEM.
Dell Support
Attachment 285494
Looking at the bugcheck we can see it's due to the PNP-subsystem:

Code:
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
... Read more

Read other 7 answers
RELEVANCY SCORE 98.4

Hi All

Being the non-technical, geekless person I am, I would certainly very much appreciate your assistance in ascertaining why I have just experienced a BSOD during Shutdown which took over half-an-hour.

My Windows 7 Ultimate x64 was working perfectly up until now and I am at a total loss as to why this has occurred.

I have attached a Crash Report courtesy of NirSoft's BlueScreenView software program.

Thank you in advance for your assistance with this matter.

Warmest Regards

Neil (Mr Smiley)

A:BSOD-Driver Power State Failure-Please Help

According to what you attached in the screenshot, it appears that one of your services failed to stop or shut down, causing the system to go in to a infinite loop that tried to kill that process.

It is just a one time event or does it happen often?

Read other 5 answers
RELEVANCY SCORE 98.4

OS: Windows 7 Ultimate
? 32-bit
? Age of system: 2~ years
? Age of OS installation: Two Weeks
? CPU: AMD Athlon X2 Dual-Core QL-60 1.90GHz
? Video Card: ATI Radeon HD 3200 Graphics
? MotherBoard: Not sure..
? Power Supply - brand & wattage: HP Part No.: 384019-002 Wattage: input - 100-240V~1.7A 50-60hz. output: 18.5V - 3.5A 65W (I wasn't sure which to put, so I just put everything I saw.)

After installing Windows 7 Ultimate (I had windows 7 RC before, and it ran fine), I've been getting a BSOD at random times that says:
DRIVER_POWER_STATE_FAILURE
0x00000009f

Then it would automatically restart. When it starts up again, usually it says that my system shut down unexpectedly and it asks if I want to search for solutions, but it keeps happening. The only programs that I can think of which are running at most times that these BSOD's come up are google chrome, windows live messenger, explorer.exe and microsoft word. I would appreciate any kind of solution.

A:BSOD - Driver Power State Failure

Hi -

The bugchecks on the 2 dumps -

0x9f (0x3,,,) - driver in an incosistant power state and blocking an IRP for too long a time

The Microsoft MSDL SYM site used to obtain symbol files to identify Microsoft OS componants is unable to ID the NT Kernel in your Windows system. I don't know the reason for this.

Run the System File Checker/ Repair utility -
START | type cmd.exe into the start search box | right-click on cmd.exe | select run as Administrator | type the following:

Code:
sfc /scannow
Upon completion re-boot to allow files in use to be repaired.

SFC general info - http://support.microsoft.com/kb/936212
SFC & the CBS log - http://support.microsoft.com/kb/928228

Validate your Windows OS installation at the Microsoft Genuine Advantage site.

WGA --> www.microsoft.com/genuine

I don't know how you got a 2007 driver for Avira in your system -


Code:

avgio.sys Thu Feb 22 09:57:32 2007 (45DDAF5C) - Avira anti-virus
AGRSM.sys Mon Nov 10 09:56:37 2008 (49184BA5) - Agere SoftModem Driver

There is not much that I can do with the symbol errors present.

I would suggest that you re-install Windows 7.

Regards. . .

jcgriff2

.

BUGCHECK SUMMARY

Code:

*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Debug session time: Mon Mar 15 16:40:53.697 2010 (GMT-4) ... Read more

Read other 2 answers
RELEVANCY SCORE 98.4

Hi

I recently changed the case and added some internal peripherials to my computer. I have a 950W power supply so what I have should not be Bluescreening my computer. I cannot open the ,dmp files to find out what is going on. Can anyone help?

My system:
Win 7 Ultimate 32bit
950W power supply
4 hard drives
2 Super Mulit Optical drives
1 flash card bay
Asus motherboard (that was running fine before I changed cases)
in win IRONCLAD case (4 120 fans, and 1 huge fan)

I am attaching the BSOD for today as a zip file.

A:BSOD with Driver power state Failure

Make and model of your Asus mobo?

Please post the info from this topic: http://www.sevenforums.com/crashes-d...tructions.html

Initial triage suggests a problem with vclone.sys - a component of your VirtualCloneCD driver.
This theory is also supported by the presence of drivers related to it that date from 2002 (ElbyCDFL.sys and
ElbyVCD.sys)
I'd suggest uninstalling it to see if that stops the BSOD's

Also, your Norton shows up in the memory dumps, so I'd keep an eye on that.

PLease remove or update these older drivers. DO NOT use Windows Update or the update function of Device Manager:

Code:

ElbyCDFL.sys Thu Nov 28 09:18:04 2002 (3DE6259C)
- ElbyCDIO Filter Driver
- Driver Reference

dvd43llh.sys Mon Feb 07 13:16:49 2005 (4207B091)
- DVD For Free by RIF
- Driver Reference

ElbyVCD.sys Thu Nov 28 05:43:49 2002 (3DE5F365)
- VirtualCloneCD Driver
- Driver Reference

SI3114r.sys Wed Oct 03 17:45:37 2007 (47040D81)
- Silicon Image driver
- Driver Reference

DRVMCDB.SYS Fri Jul 21 14:20:31 2006 (44C11AEF)
- Drive Letter Access Component of Roxio Drag-to-Disc
- Driver Reference

SiWinAcc.sys Thu Jun 14 20:02:27 2007 (4671D713)
- Silicon Image driver
- Driver Reference

PxHelp20.sys Mon Jul 24 20:18:21 2006 (44C5634D)
- Sonic CD/DVD driver (used by many different CD/DVD programs)
- Driver Reference

DLARTL_M.SYS Thu Feb 08 23:04:41 2007 (45CBF2D9)
- Shared Driver Component of Roxio Drag-to-Disc
- Driver Reference

DLACDBHM.SYS Thu Feb 08 23:05:12 2007 (... Read more

Read other 1 answers
RELEVANCY SCORE 98.4

Hi Everyone,

Got a BSOD yesterday and want to see if you guys could help me isolate the issues. This is my first BSOD in about a week.

Actually, things used to be alot worse like a week ago, I was getting random BSODs due to the installation of a Belking Wireless Adapter. I thought I had everything resolved by uninstalling the drivers and then reinstalling under windows XP because I haven't had a BSOD since then.

Anyways, I am running Windows 7 and would appreciate any help.

Thank you,
Abad

A:BSOD Driver Power State Failure

Hi,

Got the correct files for you to look at.

Thanks again.

Read other 2 answers
RELEVANCY SCORE 98.4

Please assist with a frequent and annoying BSOD, which gives the error stating: "Driver Power State Failure".

Files attached and information below.


? OS - Windows 7 SP1 (32-bit)
? What was the original installed OS on sthe ystem? Win7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Pre-loaded on laptop
? Approximate age of system (hardware) - 2 years
? Approximate age of OS installation (if you know) - 6 months
? Have you re-installed the OS? Yes after hard drive crashed and then replaced with SSD

? CPU - I5 3320M
? Video Card - Intel 4000

? System Manufacturer - Lenovo T530
Laptop

I have also run a Driver Verifier, but don't know where to find what. I did this before the Sysnative APP and the Perfmon reports.

The help is much much appreciated.
Tnx
Doug

A:BSOD - Driver Power State Failure

Hi. . .

You need to update your H5321 gw Mobile Broadband Driver.

The only known source is Lenovo Support - http://support.lenovo.com/us/en

If you can't find a driver update, go into Device Manager and disable the device since you are using your Intel 82579LM Gigabit Network Connection Ethernet for Internet.

Regards. . .

jcgriff2

`


Code:

Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\PalmDesert\AppData\Local\Temp\Temp1_SysnativeFileCollectionApp.zip\SysnativeFileCollectionApp\060115-10795-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?ffffffff`831769d4?

************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18798.x86fre.win7sp1_gdr.150316-1654
Machine Name:
Kernel base = 0x8304e000 PsLoadedModuleList = 0x831985b0
Debug session time: Mon Jun 1 04:14:29.677 2015 (UTC - 4:00)
System Uptime: 1 days 1:34:53.050
Loading Kernel Symbo... Read more

Read other 3 answers
RELEVANCY SCORE 98.4

Hi everyone

I was getting alot of bluescreens and didnt need anything on my computer so have just reformatted this machine - However I am still getting some problems.

(Which makes it a hardware problem I assume)

However I do no know exactly what is wrong ?

Hope someone could please point me in the correct direction

Thanks alot!!

P.S this is another machine from my profile stats

Intel Core 2 Dual E6750 @ 2.66Ghz
500GB / 6GB DDR2 Ram
Radeon HD 6850
Asus P5KR motherboard

A:BSOD - Driver Power State Failure

Code:
BIOS Version/Date American Megatrends Inc. 0703, 26/06/2008
Please see if an updated BIOS is available for your PC.

Code:
0: kd> lmvm atikmpag
start end module name
fffff880`03a00000 fffff880`03aa0000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Sat Dec 07 06:51:45 2013 (52A231D9)
CheckSum: 0009FEFF
ImageSize: 000A0000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please check the AMD site to see if an updated driver is available for your Radeon card.

Uninstall Avast - its a known cause of BSOD's - replace it with MSE.

Read other 3 answers
RELEVANCY SCORE 98.4

This is a HP pavilon dm4 Laptop, windows 7 64 bit.

The BSOD seems to always happen when the computer is plugged in, although it has happened a couple times when it wasn't. Its never when I am in the middle of doing something, only when I leave the computer alone for a while will it crash like this. For example, even if I am just listening to music or watch a movie, it doesn't crash. It's like it does this when it gets bored or something... As long as it is doing something it is fine.

I updated the drivers using HP's tool, but the problem hasn't gone away.

A:BSOD Driver Power State Failure

Sorry, I posted the incomplete file the first time... Here are the other files because the complete .zip file exceeded the maximum size.

Read other 2 answers
RELEVANCY SCORE 98.4

Howdy

So I'm getting the driver state power failure BSOD as well. This computer used to be Vista, about a month ago I put Windows 7 on here. It worked great for like 3 weeks but now its giving me this BSOD every 1-2 days, starting May 7th. It happens randomly - the only constant is that I've had firefox open but I don't know if that really has anything to do with it.

I did look into this before posting here, but it seems like basically everybody's is for different reasons so I'm not sure what to do.

I've attached the latest memory dump file from today.

Any help would be greatly appreciated!

A:BSOD - Driver State Power Failure

dmp points to atapi.sys. Please run a system files check:


Quote:




Open an elevated command prompt and enter sfc /scannow.




Update or remove these old drivers or their respective programs:

Code:
fffff880`0443b000 fffff880`0459f400 RTKVHD64 RTKVHD64.sys Mon Jun 02 06:11:37 2008 (4843C759)
fffff880`02d5d000 fffff880`02d76000 SCDEmu SCDEmu.SYS Fri Oct 31 02:56:21 2008 (490AAC15)
fffff880`04fa2000 fffff880`04ff8000 SynTP SynTP.sys Thu Mar 27 21:15:32 2008 (47EC46B4)
You may also try a repair install.

Please upload any new dmps that might come.


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Jonathan\AppData\Local\Temp\Temp1_051510-21528-01.zip\051510-21528-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00ba2730?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02a12000 PsLoadedModuleList = 0xfffff800`02c4fe50
Debug session time: Sat May 15 21:55:53.880 2010 (GMT-4)
System Uptime: 2 days 11:35:38.626
Loading Kernel Symbols
.................... Read more

Read other 1 answers
RELEVANCY SCORE 98.4

I run windows 7
I heard you can attach minidump files so i picked out 3 of the latest ones out of the 15.
Thanks

A:BSOD driver state power failure

Has the Samsung printer been installed long?
Did it happen before installing the printer?

All 3 name pci.sys which is the standard Windows NT Plug and Play PCI Enumerator since that is common on all Windows installs we can assume it's not the actual problem but rather a plug and play device running on it.

Follow the instructions here> http://www.techsupportforum.com/foru...ta-452654.html
Lets see if the rest of BSOD dump file(s) and the other data in the report can tell us whats going on.


Code:
0: kd> kd: Reading initial command '!analyze -v; !sysinfo cpuspeed; !sysinfo SMBIOS; lmtsmn; q'
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800f8e2a10, Physical Device Object of the stack
Arg3: fffff80000b9c3d8, Functional Device Object of the stack
Arg4: fffffa8012f3b010, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IMAGE_NAME: pci.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4ce7928f

MODULE_NAME: pci

FAU... Read more

Read other 9 answers
RELEVANCY SCORE 98.4

I have been getting this random BSOD from time to time. I'm using a laptop and I'm not sure how and when this started. Occurs when the charger is either plugged or unplugged. Any help will be appreciated. Thanks

A:BSOD Driver power state failure

Make sure your dump logging is enabled.
Click Start, point to Settings, and then click Control Panel.
Double-click System.
Click the Advanced tab, and then click Settings under Startup and Recovery.
Check Write an even to the system log, and Automatically restart.
In the Write debugging information list, click Small memory dump (256k).

Location of Dumps:
C:\Windows\minidump

Allot of important info is missing from your zip, please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a new report here.

Read other 4 answers
RELEVANCY SCORE 98.4

For the last few days my system is hanging on shutdowns (and restarts) and eventually ending with a BSod. Please help :-(

TIA

Don

System Info:
? OS - Windows 7 Home Premium
? x64
? HP Pavilion DV6 less than 1 yr old
? Age of OS installation
? Core 2 Duo P8800
? ATI Mobility Radeon HD 4530

A:BSod Driver Power State Failure

Additional files

Read other 3 answers
RELEVANCY SCORE 98.4

I have an ASUS S56CM laptop with Windows 8.1.

For the past few days I have been getting a BSOD (Driver Power State Failure) upon start up. Leading up to this, my computer would freeze completely at random times not that often and I had to do a hard shut down to fix it.

The past three days have been identical. When turning my computer on from a completlely off state, it takes forever to start then eventually gives me the BSOD. The 0% thing never loads so I do a hard shut down and turn the computer back on. It still takes forever to start (8 minutes +) but I don't get a BSOD and am able to use the computer fine. Then when shutting down, it takes over 6-8 minutes as well. Before all this, my computer would get to the log in screen in under one minute.

I had a program called "WhoCrashed" but it hasn't logged any of the BSOD's from startup, only ones that I had when the computer was already on. For one of them, it told me the error may have been caused by iastora.sys which was the Intel Rapid Storage Technology driver. I tried to delete this as well as installing a newer version but it didn't fix anything.

A:BSOD Driver Power State Failure

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!
Add to that the release of the Win10 preview and my system messing up - and I'm way behind on replying to topics. Sorry!

Do your still need help with this problem?
I will be notified if you reply to this topic and will respond within 48 hours.

Read other 8 answers
RELEVANCY SCORE 98.4

? Windows 7
? x64
? 1month
? i7 930
? gtx 580
? asus rampage III gene x58
? enermax galaxy 850w DXX

when i shut down my pc takes 80% of shutdowns 14+ min to close down after showing a driver power state failure bsod, please help me find a solution,

thank you
damien short

A:driver power state failure bsod

Hello,

It appears your Creative Audio drivers are the cause, from the looks of the dump. I see they are rather old:
Code:
CT20XUT.DLL Thu Aug 21 12:40:17 2008 (48AD9A71)
ctaud2k.sys Thu Aug 21 12:38:56 2008 (48AD9A20)
CTEXFIFX.DLL Thu Aug 21 12:40:11 2008 (48AD9A6B)
CTHWIUT.DLL Thu Aug 21 12:40:21 2008 (48AD9A75)
ctoss2k.sys Thu Aug 21 12:36:31 2008 (48AD998F)
ctprxy2k.sys Thu Aug 21 12:38:58 2008 (48AD9A22)
ctsfm2k.sys Thu Aug 21 12:36:16 2008 (48AD9980)
Install updated drivers from here: Auzentech, Inc. Sound Cards. Audio You Can Believe In. World First soundcards for Music, HTPC, and Gaming.

If that doesn't work, upload a new report, and we'll go from there.

...Summary of the dumps:

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Jan 5 19:17:22.447 2011 (UTC - 5:00)
System Uptime: 0 days 6:05:05.649
Probably caused by : pci.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_3_ctaud2k_IMAGE_pci.sys
??????????????????????????????????????????????????????????????????????????????????????``

Read other 2 answers
RELEVANCY SCORE 98.4

Hello, I am having random BSOD crashes mostly when browsing on internet.

My Build is
- x64
- Original OEM
- > 1 month old
- > 1 month old, never reinstalled.

Any help is more than welcome.

A:Driver State Power Failure BSOD

Hello and Welcome !

Seems like lot of issues are going on. First thing i noticed is sptd.sys duplex driver which i well known for BSOD. I would recommend to uninstall it follow this article DuplexSecure - FAQ

Also it looks to me like it's an issue with AiCharger.sys - an Asus program named AiCharger (may also be a part of the Asus AISuite or ASUS Ai Charger). Then uninstall the current copy of the program and install the freshly downloaded copy.

Run a Hardware Diagnostic (Memory and Hard Drive) follow this link for instructions Hardware Diagnostic !! ? Captain Debugger

Bugcheck:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80083a1060, fffff8000460e518, fffffa80060214c0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+292b0 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *... Read more

Read other 8 answers
RELEVANCY SCORE 98.4

Hi,
recently my laptop (Acer 5655G-9471) started showing me BSODs while Shutting down. After about 10-15 minutes of showing me "Shutting down...", it fails and shows me DRIVER_POWER_STATE_FAILURE. Not sure what the error code was but I'll write that down when it happens the next time. Attached is a SF Diagnostic dump.

A:BSOD driver power state failure

Code:
BugCheck 1000009F, {4, 258, fffffa8004de5b60, fffff80000b9c3d0}

*** WARNING: Unable to verify timestamp for GEARAspiWDM.sys
*** ERROR: Module load completed but symbols could not be loaded for GEARAspiWDM.sys
Implicit thread is now fffffa80`04de5b60
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : GEARAspiWDM.sys ( GEARAspiWDM+721b )

Code:
Usual causes: Device driver
GEAR ASPI Filter Drive Kernel:


Code:
5/18/2009 1:17:04 PM
gearaspiwdm.sys - Information

This driver seems to be causing some issues with your system, from what I have found, it is usually linked with iTunes or a CD/DVD burning program.

Could please upload the .NFO separately since for some reason it is being reported as corrupted:

Start > Type: msinfo32 > File, SaveScreenshots and Files - Upload and Post in Seven Forums

Read other 5 answers
RELEVANCY SCORE 98.4

My New Years Resolution is to get my laptop back to normal.

I've been having this issue for awhile where if I leave it sitting idle for a couple of minutes and come back, it may or may not cooperate. It frequently gets 'stuck' and becomes unresponsive. Every so often the BSoD pops up and gives the Driver Power State Failure.

I've zipped the documents as per the instructions in jcgriff2's signature.

Any help would be greatly appreciated, Thanks!

A:BSoD - Driver Power State Failure

Sorry, Left out step 5...

-Windows 7 Pro
-32 bit
-Original OS Vista Home Premium 32
-Current OS upgrade via educational system
-Age of hardware 3 1/2 years
-Installed 7 maybe 9-12 months ago... hoping to get rid of this same problem
-CPU: AMD Turion 64x2 TL-64 2.2GHz
-Nvidia GeForce Go7200
-MoBo: ?
-PS: ? (Laptop HP AC adaptor 90W)

Read other 6 answers
RELEVANCY SCORE 98.4

I've been experiencing issues with my computer. It tends to blue screen and reads "Driver_POWER_STATE_FAILURE". I've tried to run some scans and diagnostics and even backed up my PC and then rebooted it with factory new settings, but it is still BSOD. I have a dump file, but I cannot post it because it says I do not have permission to open or attach it. Any help would be greatly appreciated!


Thanks!

A:Driver Power State Failure - BSOD

You need to follow these directions
We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
Please attach the DMP files to your next post not to post one.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 3 answers
RELEVANCY SCORE 98.4

i am having an issue with bsod's it says driver power state failure and crashes
i tried to upload the minidump files but it says i dont have permission to access these files but i am logged in as the administrator please help
 

A:BSOD driver power state failure

What OS are you running?
 

Read other 1 answers
RELEVANCY SCORE 98.4

Hi, my computer is being shutdown a few times with the Blue Screen and I have no idea what's going on. I have the Windows 7 and suposedly I have no hardware problem and/or compatibility but I have been reading the posts and I don't know what to do. So I have uploaded the DUMP files so you guys can give me a help. What should I do???

A:Driver power state Failure BSoD

  
Quote: Originally Posted by wolfinhu


Hi, my computer is being shutdown a few times with the Blue Screen and I have no idea what's going on. I have the Windows 7 and suposedly I have no hardware problem and/or compatibility but I have been reading the posts and I don't know what to do. So I have uploaded the DUMP files so you guys can give me a help. What should I do???



Hi and welcome

these crashes were caused by nvm62x64.sys part of your nvidia fforce hardware firewall.

I would remove it to test and put something else back later

Let us know if you need help

Ken

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\New folder (3)\030910-24507-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: SRV*F:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02817000 PsLoadedModuleList = 0xfffff800`02a54e50
Debug session time: Tue Mar 9 00:23:34.636 2010 (GMT-4)
System Uptime: 0 days 23:09:45.039
Loading Kernel Symbols
...............................................................
.... Read more

Read other 2 answers
RELEVANCY SCORE 98.4

Hi, all I just clean installed Windows 7 Ultimate 32bit on my Dell Vostro 1310 with 3gb ram, 1.8gHz Core2Duo, and 250gb hd. However I am getting BSOD stating driver power state failures, the computer will power up and work fine for about 20-mins then it will crash like clock work.
I do not have any exclamation marks in the device manager, I have update all my drivers with the latest and greatest Vista 32bit drivers from Dell as that is all they have right not, and I even updated the bios.
I tried to analyze the dump files myself but every time I attempt to install the debugging software it hangs at the progress bar until it becomes unresponsive then eventually crash the system. I have attached a dump file for review, if someone is willing to help me out.
Thanks

A:BSOD Driver power state failure

The OS becomes exasperated because the combination of the disk hardware and the drivers responsible for controlling it are taking too long to deal with a power state transition.

Try to update this driver...

iaStor Fri Jul 13 08:59:22 2007

... and get rid of this one:

SiWinAcc Tue Nov 02 06:21:31 2004

Ultimately, if the problem is not caused by a driver, the disk hardware itself may be suspect. Hopefully it's a driver!

In the short term, you may be able to work around the issue by disabling all power management - set everything to run at 100% constantly.

-----------------------------------
EDIT: BTW, the "do you have question marks in devmgmt.msc?" line of BSOD troubleshooting is a waste of time. The one thing you can pretty much rule out as the cause of a BSOD is the lack-of-driver for a device which hasn't been detected and enabled.

Read other 5 answers
RELEVANCY SCORE 98.4

My computer slow down and ... BSoD with a Driver Power State Failure message. Can someone help me.

Vista Ultimate 64bits,
minidump

Read other answers
RELEVANCY SCORE 98.4

Hi everyone, have had a huge amount of help from this website in the past and am wondering if anyone can help.

I have a year old Windows 7 Acer Laptop. Has been performing fine, but have had a couple of Blue Screens in the past week, one of which was a "Driver Power State Failure".

Have attached the minidump files to this message. If anyone can help it would be greatly appreciated.

Thanks,
Jon
 

A:BSOD Driver Power State Failure

don't like to bump my own threads but if anyone can help, would be great help.
 

Read other 1 answers
RELEVANCY SCORE 98.4

Hi, I've been getting this BSOD error quite frequently now and I'm not sure what the problem is.
I've attached the zip from the SF Debug Tool.

Note: I have a modded BIOS for lower GPU voltages from
L502X modded bioses download (GPU voltages and more!)
and also have my GPU underclocked if that information is relevant.

A:BSOD Driver State Power Failure

Hi Aurum & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Sat Dec 20 08:06:04.657 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\122014-5562-01.dmp]

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Windows 8 Kernel Version 9600 MP (8 procs) Free x64

System Uptime: 0 days 0:08:10.789

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Probably caused by : ntoskrnl.exe ( nt+1509a0 )

BugCheck 9F, {3, ffffe000cf5eb4f0, ffffd00020775960, ffffe000d5bf2bd0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe000cf5eb4f0, Physical Device Object of the stack
Arg3: ffffd00020775960, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe000d5bf2bd0, The blocked IRP
BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

FAILURE_BUCKET_ID: WRONG_SYMBOLS

CPUID: "Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz"

MaxSpeed: 2000

CurrentSpeed: 1995

BIOS Version A12

BIOS Release Date 09/07/2012

Manufacturer ... Read more

Read other 8 answers
RELEVANCY SCORE 98.4

Hello guys,

I have seen lot of topics with the same subject as I have, but as I understand each of them is "special", so I am posting new one.

Sometimes when I restart / shut down my computer, it is turning off for few minutes (10 - 20m) and then I can see BSOD.
Last one was with Driver Power State Failure message - 011510-17128-01.zip minidump.
I have also few more minidumps - Minidump.zip (but I think almost all are with the same message)
I don?t know how to read it, so please, can someone check it and help me?

I have Acer Aspire 3694, Win7

Thank you very much for help

A:Driver Power State Failure BSOD

Most probably this is due to your Deterministic Network Enhancer Miniport or Cisco Systems VPN Client (dne2000.sys). Also, please note that the dne2000.sys file is listed below as being older. Also, this could be due to the other, network related drivers in the list below.

Please:
- download a new copy of the Win7 drivers for the Cisco VPN Client device
- uninstall the current copy from your system.
- install the freshly downloaded copy
- wait for further BSOD's.

Also, Please update or remove these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager. Please use the following instructions to locate the most current drivers:





Quote:
How To Find Updated Drivers:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- some driver links are on this page: http://www.carrona.org/drvrdown.html

Here's the older drivers:

Code:
bcm4sbxp.sys Tue Nov 21 07:25:43 2006 - Broadcom 440x 10/100 Integrated Controller XP Driver by Broadcom Corporation (Broadcom.com - Home).
CVP... Read more

Read other 3 answers
RELEVANCY SCORE 98.4

Thanks for reading my post. I've been using my Gateway laptop for 3 years with relatively few problems. Since June or so, I've been seeing random blue screens, with no consistent series of events, or none that I can see. I'm attaching the sevensforum folder. Any help would be appreciated.

A:BSOD- driver power state failure

Welcome
You reports were consistent. The cause seems to be this driver
O2sdx64.sys file descriptionProductname: O2Micro SD Reader Driver Description: O2Micro SD Reader Driver (AMD64) O2Micro
Go to the company website and update the driver or replace the software

Read other 3 answers
RELEVANCY SCORE 98.4

hey
sometimes when i shut down my computer it takes forever to shut down and then i get a BSoD. i attached a zip file with the dumpfiles.
hope you guys can help me
regards kayabrico

A:Driver power state Failure BSoD

Hi,

The attached DMP files are all of the DRIVER_POWER_STATE_FAILURE (9f) bugcheck.

This error occurs if drivers do not handle power state transition requests properly, usually during one of the following procedures: shut down, suspending or resuming from standby, suspending or resuming from hibernation.

IMAGE_NAME: asmthub3.sys

MODULE_NAME: asmthub3

FAULTING_MODULE: fffff88006d73000 asmthub3

Running an !irp on the blocked IRP address (4th parameter of the bugcheck) we get:


Code:

0: kd> !irp fffffa80148ba3c0
Irp is active with 7 stacks 6 is current (= 0xfffffa80148ba5f8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8013d45430 00000000 fffff80002e776f0-fffffa80155be4c0 Success Error Cancel pending
\Driver\asmthub3 nt!IopUnloadSafeCompletion
Ultimately, it appears asmthub3.sys is the culprit here, wh... Read more

Read other 19 answers
RELEVANCY SCORE 98.4

Hello forum. My wife has a Dell Inspiron 15r 5010. Win 7 Home Premium x64. Yesterday she had a BSOD. I have followed your posting guidelines and hope that I have everything attached that you will need. She will go nuts if she isnt able to play her games lol Thank you in advance for your time and suggestions.

A:Driver Power State Failure BSOD

One of the most clear cut crash dumps I have ever seen.

Code:
FAULTING_MODULE: fffff8800aacc000 tap0901
It is used by two things. Comodo, and some VPN clients.

If you have (a glance at your system says that you have) such programs installed, uninstall them and see how it goes.

Let us know the result.

Read other 5 answers
RELEVANCY SCORE 98.4

I am getting the bsod error driver power state failure. It appears to be random unless i go to play star wars the old republic and it does it with in about 10 minutes of playing every time. This is fairly recent. I was playing it before for several hours with out trouble, and now it does it outside of the game. I hope you can help. Attachment 312126

Attachment 312127

A:BSOD Driver Power State Failure

Hi punkiemi.

How many days ago you installed Service Pack 1? Very recently it seems?

The zip contains two crash dumps. One, the older one is related to games. And, this time the PC was not SP1 installed.

Code:
BugCheck 116, {fffffa80066fb010, fffff8800517e664, ffffffffc000000d, 3}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+97e664 )

Followup: MachineOwner
---------
Taking the age of your PC into consideration, stop 0x116 BSODs may occur under certain conditions.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

The PC seems to be overclocked.

Code:
Max Speed 2300MHz
Current Speed 2310MHz
As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the the wattage of the PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Install the NVIDIA DRI... Read more

Read other 1 answers
RELEVANCY SCORE 98.4

Hello- First-timer! Sorry, I hope this isn't a redundant post. I'm not too savy and don't understand all the lingo so go easy on me.

Backstory: This is my first post and I'm very new to the computer world (beyond the basics). I decided to try and take on my first build (everything new except PSU and case). Everything seemed fine until recently.

Problem: I keep getting the BSOD shortly after coming out of sleep mode. It mentions "Driver Power State Failure". I have read several posts claiming similar happenings but all of the replies seem very specific to people's hardware and associated drivers so I wasn't sure how to apply it to my situation. Any help is greatly appreciated.

I have attached my dump files.

Thanks!

A:BSOD - Driver Power State Failure

Hello Doonga. This crash is caused my M Audio drivers.

Code:
Irp is active with 9 stacks 7 is current (= 0xfffffa80101bc8c0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa800ee08060 00000000 fffff88004384fd4-fffffa800ee337a0
\Driver\usbhub ks!CKsDevice::CompleteDevicePowerIrp
Args: 00000000 00000000 00000000 00000002
>[ 16, 2] 0 1 fffffa800ee33c20 00000000 00000000-00000000 pending
\Driver\MAUSBFASTTRACKULTRA
Args: 00041100 00000001 00000001 00000002
[ 16, 2] 0 e1 fffffa800ee3be30 00000000 00000000-00000000 pending
\Driver\ksthunk
Args: 00041100 00000001 00000001 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800fe96220
And that is very old.

Code:
start end module nam... Read more

Read other 4 answers
RELEVANCY SCORE 98.4

I'm getting daily BSOD failures, and was finally able to get some of the information. I've attached the zip file and hopefully someone can tell me what i need to do to remedy this. I've included as much information as i can find in my profile.

A:BSOD Driver Power State Failure

In your files, I only found 2 dump files, about a month apart. If you are having daily BSODs, please be sure your computer is configured to create small memory dumps. this will help you Dump Files - Configure Windows to Create on BSOD Pleas use the steps listed to create small memory dumps.

The first dump was on 5-9


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff800034c45da, fffff88003968fa8, fffff88003968800}
Probably caused by : memory_corruption ( nt!MiGetNextNode+2e )
Followup: MachineOwner
The second dump was in July of 2012 So really is of little importance at this point. However, I would suggest you update your Nvidia driver to the latest WHQL version I would also use this method to insure you get a clean install. NVIDIA Drivers - Avoid Problems

I would also, after doing the above like you to Open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, noti... Read more

Read other 9 answers
RELEVANCY SCORE 98.4

I've been getting a driver state power failure BSOD, I have no idea where the problem is coming from. minidump is attached. It's started recently, and I've been having problems now with the game Skyrim now too.

A:Driver Power State Failure BSOD

Update: Just encountered another BSOD, this time while browsing youtube. Both minidump files attached.

Read other 1 answers
RELEVANCY SCORE 98.4

Hey Everyone,

If anyone could take a look at this and see why I got the BSOD for Driver Power State Failure, I would greatly appreciate it.

There are a few .dmp files in the attachment, but the only one I am concerned about would be the most recent one and may be the one before, since they are both related to Driver Power State Failure.

Thanks in advance.

A:BSOD - Driver Power State Failure

Welcome to the forum.


Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\USER\Downloads\schniederzero\SF_13-01-2014\011314-25708-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02c0b000 PsLoadedModuleList = 0xfffff800`02e48e50
Debug session time: Mon Jan 13 07:54:00.000 2014 (UTC + 6:00)
System Uptime: 0 days 6:48:39.771
Loading Kernel Symbols
...............................................................
................................................................
................................................................
.
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to... Read more

Read other 2 answers
RELEVANCY SCORE 98.4

Hello,

Did a clean install of Windows 8.1 - I previously had Windows 7. I have already had 4 'Driver Power State Failure' BSODs. I have attached the files from the SF Diagnostic tool.

Any solutions?

NB: This is a custom built PC with an Asus P8H61-M LX3 Plus R2.0 mobo.

Thanks in advance.

A:BSOD - Driver Power State Failure

Hi lfc123 and welcome to the forums!

Driver_Power_State_Failure with code 9F means that an Input / Ouput Request was not received back by the operating system even after a long time.

I have analyzed your DUMP files and the problem is caused by "netr28ux.sys" . I was only able to analyze the first DUMP file as the second one is corrupt, dunno why?

Visit this link Driver Reference Table

and update your driver from the given link.

Let me know incase the problem is not resolved and I will be happy to assist more
Also, if this solves your problem, please don't forget to mark this thread as solved.

Read other 1 answers
RELEVANCY SCORE 98.4

Just recently I changed my computer over to a new case and a new motherboard, and it has just started BSoDing ><

I run a Core i7 960
Radeon HD 5870
Dual DVD burners
A kingston SSD
A 1tb redundant HD
A 1k W PSU
Dual 4GB DDR3 DSIMM
And a Rampage III Extreme Motherboard.

Any help would be appreciated.

A:BSoD Driver Power State Failure

Hi,

usbccgp.sys blamed for most of the BSODs.

However looking closer the problem appears to be related to AiCharger.sys - an Asus program named AiCharger (may also be a part of the Asus AISuite).

Uninstall that software suite and see if problems persist.

Regards,
Reventon

BUGCHECK SUMMARY
Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sat Aug 28 03:25:38.240 2010 (GMT+12)
System Uptime: 0 days 0:15:37.380
BugCheck 9F, {3, fffffa800b31aa00, fffff80000b9c518, fffffa800b21e480}
Probably caused by : usbccgp.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sat Aug 28 00:07:38.147 2010 (GMT+12)
System Uptime: 0 days 0:15:37.287
BugCheck 9F, {3, fffffa8009d09060, fffff80000b9c518, fffffa800c2bab80}
Probably caused by : usbccgp.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Aug 27 22:00:45.116 2010 (GMT+12)
System Uptime: 0 days 0:15:52.240
BugCheck 9F, {3, fffffa800adca240, fffff80000b9c518, fffffa800b6518d0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+29330 )
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
???????????????????????????????????????????????????????????????????????????... Read more

Read other 1 answers
RELEVANCY SCORE 98.4

I'm getting this error when the system goes to a power down state I think. If I leave it on over night next morning I have the BSOD with this error. Not sure what to do about it. I uploaded the info files.

A:BSOD Driver power state failure

Your crashes are being caused by McAfee. It has a 2008 driver attached to it. You should update to a newer version of McAfee, and if you already have, the old version may not have been completely removed. Uninstall, download a fresh copy of the most up to date installer for McAfee, and re-install McAfee to see if that resolves the crashes.

How to uninstall or reinstall supported McAfee products using the McAfee Consumer Products Removal tool (MCPR.exe)


If the above does not work, remove McAfee completely using MCPR and replace it with either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.


Also, update the following driver:
Code:
fffff880`04784000 fffff880`047b6000 Rt64win7 Rt64win7.sys Thu Feb 26 02:04:13 2009 (49A65B0D)
It is your LAN driver, and you can find the update through HP Support for your model:
HP Support & Drivers | United States

You can also find it here:
Rt64win7.sys
->
Realtek

Read other 1 answers
RELEVANCY SCORE 98.4

i got blue screen second time in one week, it said driver power state failure, i attached minidump file, running win 7 ultimate

Read other answers
RELEVANCY SCORE 98.4

Hi,

? OS: Windows Vista SP2
? 64-bit
? No previous installed OS
? Age of system (hardware) - 2 years, 3 months
? Age of OS installation - have you re-installed the OS? 2 years, 3 months, never re-installed
? CPU - Don't know
? Video Card - nVidia - Display - NVIDIA GeForce 7600 GS
? MotherBoard - Don't know
? Power Supply - Don't know

The problem is sometimes when I want to shut my computer down it takes AGES. After waiting about 20 minutes, it will just BSOD and be fine when I re-boot it. Sometimes, but not as often, after I turn on my computer back from sleep mode it will go very slow for about 20 minutes then just randomly BSOD.

Thanks in advance to anyone that can help!

A:BSOD Driver Power State Failure

Hi -

The BSOD dump shows OS corruption. The likely cause is unknown hardware failure.

Run memtest86+ --> http://www.memtest.org/#downiso
- one stick at a time, alternate the slots

Run chkdsk /r

Run HDD diagnostics

Regards. . .

jcgriff2

.



Vista x64 SP2 - - BSOD BUGCHECK 0x9f (0x3,,,)

Code:

Opened log file 'C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\_99-dbug.txt'

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\Mini041310-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6002.18160.amd64fre.vistasp2_gdr.091208-0542
Machine Name:
Kernel base = 0xfffff800`0204e000 PsLoadedModuleList = 0xfffff800`02212dd0
Debug session time: Tue Apr 13 21:25:44.807 2010 (GMT-4)
System Uptime: 7 days 0:29:19.048
Loading Kernel Symbols
..........................................
Loading User Symbols
*******************************************************************************
* *
* Bugcheck Analysis... Read more

Read other 9 answers
RELEVANCY SCORE 98.4

I've searched the forums and this seems to be a common bsod but varying in drivers that need to be updated.

? OS - Windows 7 ?
? x64
hp dm1z laptop


Originally, my problem was that I would put my computer into sleep or hibernate and I would be unable to recover back into windows. HP helped me turn the power settings off and on thus resetting it and it fixed it.

But now my computer hits BSOD once it's been asleep for about 10-15 mins, extended periods. It'd show BSOD out of no where!

A:BSOD - Driver Power State Failure

Hi,

The single BSOD blames your wireless networking driver.

Code:
athrx.sys Tue Sep 22 14:47:11 2009 (4AB83AAF)
See if an update fixes it - http://welcome.hp.com/country/us/en/support.html

Regards,
Reventon

BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Dec 17 18:21:38.883 2010 (GMT+13)
System Uptime: 0 days 0:55:21.662
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
Probably caused by : athrx.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`0316aa20 fffff800`00b9c518 fffffa80`02f7c7d0
??????????????????????????????????????????????????????????????????????????????????????``

Read other 1 answers
RELEVANCY SCORE 98.4

Hi,

My laptop goes to BSOD what seems like several times a week and drives drives me nuts. We've had the laptop exactly two years now and it seems to be getting worse and more frequent. I've tried a completely fresh/clean install of Windows 7 64-bit, but no luck.

The problem happens about 70-80% of the time when the computer has gone to sleep and we're trying to wake it up using any button on the keyboard or the power button (doesn't matter which one). Less often, it will completely freeze up while we're browsing the internet (Chrome...we can switch between windows/desktop and scroll the cursor for a minute or so before the BSOD comes up).

The BSOD error comes up as: "Driver Power State Failure". Attached is the ZIP file as instructed.

Any help would be greatly appreciated.

Thanks,
Jeremy

A:Driver Power State Failure BSOD

Hi Neons97.

You need to update Fresco Logic xHCI (USB3) Controller FL1000 Series driver. No feasible update is available in ASUSTeK Computer Inc. -Support- Drivers and Download N53SV. So try the
Fresco Logic FL-1000/1009 USB 3.0 Controllers from Station-Drivers - Fresco Logic (drivers).

Also turn off USB selective suspend.
USB Selective Suspend - Turn On or Off

BTW, your RAM seems to be of odd volume.

Code:
Installed Physical Memory (RAM) 14.0 GB
Publish a Speccy snapshot : Speccy - Publish Snapshot of your System Specs .

Let us know the results.
__________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800fced060, fffff80000b9c3d8, fffffa80153e7010}

Probably caused by : usbhub.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis ... Read more

Read other 7 answers
RELEVANCY SCORE 98.4

I performed a clean install of Win 8 x64 from Win 7 x86. I have had freezes or bsods at the Metro screen if the computer sits unattended for awhile or goes to sleep. I have updated the BIOS to the latest version, am running defaults and not overclocked. I think it is a driver issue but I cant seem to track it down. Any thoughts?

A:BSOD Driver Power State Failure (Win 8 x64)

bump? If more information is needed let me know. Thanks. If it's general incompatibility with a piece of hardware I may just go back to Win 7.

Read other 3 answers