Over 1 million tech questions and answers.

ATI Catalyst Control Center (CCC) not displaying "Theater Mode" option

Q: ATI Catalyst Control Center (CCC) not displaying "Theater Mode" option

I have read quite a few threads talking about this both here and elsewhere and none of them seem to give me any advice that both applies to my specific situation and resolves the issue.

I am using an XFX 5770 card with a dual monitor setup and would like to be able to run theater mode l did in the past on my old system with a 4650 card (XP installed on the old system).

The two monitors are the same that I used on the old system when the theater mode worked as are the cables (HDMI to a 52" Samsung and DVI adaptor to VGA cable for a small regular monitor). Since the cabling and the monitors are the same as they had been when it was working on the other system I ruled them out the cause of the trouble.

I have tried the 10.6 and 10.5 CCC versions and nothing seems to work.

Here is a screen grab of what the CCC looks like for me without the theater mode option:

Yfrog Image : yfrog.com/j8snip6j

Any ideas or suggestions would be appreciated.

RELEVANCY SCORE 200
Preferred Solution: ATI Catalyst Control Center (CCC) not displaying "Theater Mode" option

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: ATI Catalyst Control Center (CCC) not displaying "Theater Mode" option

Welcome to Seven Forums fru. I don't have CCC so can't really help. All I found mentions having 2 monitors and theater mode only working with Overlay, and also certain media players. Bumping this hoping someone can help.

A Guy

Read other 2 answers
RELEVANCY SCORE 114.8

hello all,

I Just got my new laptop and tried to install the graphics driver and this error showed up when I try to go to CCC :"AMD catalyst control center cannot be started there are currently no settings that can be configured"

I googled this issue and I tried everything. I reinstalled it over 10 times and repaired/downloaded .net frameword. Results were nothing. It has been 2 days and I can't do anything on my laptop. Any help is greatly appreciated.

Thank you
 

A:"AMD catalyst control center cannot be started"

Read other 13 answers
RELEVANCY SCORE 101.6

I just got rid of Win8 and installed Win7 Ult on my HP H1818 pc. I can open up the vision Engine Control Center, but have no options to scale my display.
The video card is an AMD 6450. I have tried the 13.8 and the non beta driver.
It was there in Win 8. I use this PC as a media center and it is hooked up to my Samsung led TV. The overscan is killing me, I cant see the egdes of the screen to max/min windows. ETC.

I have completely uninstalled all AMD graphic driver and Catalyst Control Center and reinstalled with the same results.
The computer is hooked up with HDMI to receiver to TV input. THis worked fine with Win8.

Help

A:No option for scaling with ATI catalyst control center

85 views and no one has any suggestions.??

Read other 3 answers
RELEVANCY SCORE 101.6

I had installed AMD ATI driver version 14.4., which worked just fine, but when I saw a new version of 14.9. I decided to install it, and the problems started.
When I wanted to install 14.9. there was no other option to install but just AMD Catalyst Install Manager.
I decided to install 14.4. version back, but this time in 14.4. version were no other options than AMD Catalyst Install Manager aswell.
I tried everything! I unistalled completly AMD drivers, completly unistalled Intel drivers, did several times everything, and because nothing worked, I reinstalled windows thinking this has to solve all problems.
But nothing was solved. I still have problems AMD ATI driver (no matter which version) shows me just AMD Catalyst Install Manager option to install.
Any advice?

Thanks.

A:No option to install Catalyst Control Center

Hi Welcome to Seven Forums ... What is the Model Number of your Laptop ? ....

Does your Laptop have Duel Graphics ? .... A lot of Hp Laptops come with Graphics and Chipset Driver rolled into one ...

It might be best to get your Driver from the Manufactures Website ....

Read other 2 answers
RELEVANCY SCORE 100.4

I am on a Windows 7 Professional SP1 system, running IE 11 (11.0.9600.19230C0, update version 11.0.101 (4483187).


When I have Internet explorer opened in "kiosk mode" on one monitor and I open a hyperlink from the other monitor it will open the link in a new IE window (non-full screen) .    If I do the same test with IE not in "kiosk mode"
the hyper link will open in the open window/tab. 

I have Internet Options -- Tab settings "Open links from other programs in"  set to "the current tab or window".  

Any ideas would be appreciated.
Thanks - Tim Reisner

Read other answers
RELEVANCY SCORE 97.2

Hi all
Previously the  "Save Picture"  box would put a web generated title in the box and automatically selected JPEG.  Now the title box reads "untitled" and the only file options offered are "png" & "bmp" 

Please note that a similar post has appeared, but the solution did not match the fault.  I'm seeking to restore the automatic response to save picture, that might have been upset by antivirus clean-up programme.

Thank youin advance for considering my problem

Read other answers
RELEVANCY SCORE 92.4

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Read other 6 answers
RELEVANCY SCORE 90

Second time I've tried to post this. First try disappeared.
I have a big, fast 1 1/2 year old HP with a SB Live 5.1 upgrade. I use the "WHAT YOU HEAR " recording option all the time, but recently the check mark frequently disappears and nothing is recorded. I use two different programs to record; ABSOLUTE MP3 RECORDER and ROSOFT AUDIO RECORDER (registered version.) I have reinstalled the software to no avail. Any answers to my problem would be appreciated.
 

Read other answers
RELEVANCY SCORE 90

I need to block/hide/disable in the control panel the option "Change Adapter Settings". I have a DHCP server and I dont want my users configure a network adapter with a fixed ip.

I am looking for registry section or a directive that makes the trick.

Thanks in advance.

A:How can I block in Control Panel the option "Change Adapter Settings"

I found this software, but I wonder how it is made the trick.

I need to apply "it" throw an in-house application.

Edit Windows 7 Registry Software, Customize Windows XP Registry Settings, Tweak Registry Editor

Read other 2 answers
RELEVANCY SCORE 88.8

It seems that no matter how I set this, after the next start-up it reverts to "15 minutes".  What registry key controls this?

Read other answers
RELEVANCY SCORE 88.8

Have recently switched to Win 10, and noted that when you right click on the win bottom left, the control pannl option shows up, or if I press the win key, and type control panel, the option comes up.
No problem and a nice feature.
BUT, I now seem to have lost both the right click function ( nothing comes up) and when I type in Control Panel I have the choice of searching the web OR the settings pannel. A nuisance
BUT
seems that a range of functions are linked to the old Control Pannl, which I now dont have
OR, will not activate when in Settings. ( Like create a system image etc)
I dont know how this happened ... my mistake no doubt by error

any idea if I can download the missing bit, or reactivate it ?
Thanks

A:Lost the "control pannel" option

Welcome to the forum. If you open explorer is the control panel on the left at the bottom if so right click on it and you can then pin to start or quick access Control Panel - Open in Windows 10 - Windows 10 Forums

Read other 5 answers
RELEVANCY SCORE 88.8

Hey everyone, I'm having problems with a System Security Center control panel that ended up on my computer. Ive run CCleaner, AdAware, Spybot, norton antivirus and windows defender and all show no problems. Any help would be appreciated, here's my HJT log:

Logfile of HijackThis v1.99.1
Scan saved at 12:53:11 PM, on 2/6/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.5730.0011)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\Intel\IDU\awServ.exe
C:\WINDOWS\System32\GEARSec.exe
C:\Program Files\Norton SystemWorks\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton SystemWorks\Norton Ghost\Agent\PQV2iSvc.exe
C:\Program Files\Norton SystemWorks\Norton AntiVirus\IWP\NPFMntor.exe
C:\PROGRA~1\NORTON~1\NORTON~1\NPROTECT.EXE
C:\WINDOWS\system32\nvsvc32.exe
C:\PROGRA~1\NORTON~1\NORTON~1\SPEEDD~1\NOPDB.EXE
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Common Files\Symant... Read more

A:Can not remove "System Security Center" Control Panel

Hi coupon,

Welcome to Tech Support Forum!

I apologize for the delay getting to your log. The helpers here are all volunteers and we have been very busy here lately. If you are still having malware problems, I will be glad to help.

OK, let?s do this first.

Go to the Start menu, and click on Control Panel. Choose Add/Remove Programs and remove any of the following that are listed:

NetMeter


NEXT:

Please run HijackThis and click "Scan". Place a check (tick) next to the following entries (if present):

O4 - HKLM\..\Run: [Personal Security Center Monitor] C:\WINDOWS\system32\psc_mon.exe
O4 - HKCU\..\Run: [NetMeter] C:\Program Files\NetMeter\HooNetMeter.exe


Close ALL programs and browsers (including this one), leaving ONLY HijackThis open, then click "Fix checked".

Then please exit HijackThis.


NEXT:

Please go to: VirusTotalAt the top of the page you'll find a "Browse" button. Click the "Browse" button and browse to next file:

C:\WINDOWS\system32\psc_mon.exe

Click "Open".
Then click the "Send" button at the top of the VirusTotal page.
This will scan the file. Please be patient.
Once scanned, copy and paste the results in your next reply together with a new HijackThis log.


NEXT:

Using Windows Explorer, please navigate to and delete the following FILES (if they exist):

C:\WINDOWS\system32\psc_mon.exe



Using Windows Explorer, please navigate to and delete the fol... Read more

Read other 10 answers
RELEVANCY SCORE 88.4

Hi, i really have a big and annoying problem:

I had just gotten this new computer and I installed the latest correct drivers from AMD.
I have an APU processor with the integrated Radeon 6550D.

But when I opened the Vision Engine Control Center, there was no gaming tab where I can change the 3d settings for games...
Even on Advanced view, there was no gaming tab.

Even after completely uninstalling the drivers and reinstalling again, there was still no gaming tab!

Can someone please help me? I am at the "end of my rope" on this problem.
I've seen people that talk about changing their 3d settings in the control center that also have the 6550D card.
I've searched online and all the other users who don't have a gaming tab also have these errors that I DON"T have..
So I have absolutely no idea why this is happening to me..

This is what my Vision Engine Control Center looks like (notice there is no gaming tab):

 

A:AMD Vision Engine Control Center No "Gaming" Tab

does anyone know why this is happening and how to fix it?
i really want to change some of the 3d options and at least check how my monitor is scaling the full screen games...
 

Read other 2 answers
RELEVANCY SCORE 88

Okay, I have an ATI Radeon 8500 on my Windows XP system, and one day, after my dad had used the computer, the 3D video driver stoppeed working. He can't recall doing anything. So it goes. I think "whatever", downloaded the latest Catalyst drivers, and try to install it, only to get the message "INF Error, Video Driver Not Found" and then "Try to set up your adapter with a standard VGA driver before running setup". I tried googling for info (apparently it's a common-ish issue), but I never found anything that worked. I tried uninstalling anything ATI and then installing, to no avail. I tried uninstalling the error-listed VGA adapter from the Device Manager and then running install which didn't work. Rebooting after that also didn't work (it popped up with "New hardware found" after the reboot, but it couldn't find the proper drivers).

After an unedifying series of adventures I got to http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=45&kind=1 which has several drivers for my mobo. I first downloaded (obviously) the VGA driver, and tried to run setup. Unfortunately, after preparing the install, an Error message pops up saying "The system cannot detect the device, please confirm that the device is configured properly and restart the setup program." I then tried downloading the AGP upgrade, installed it, but nothing changed. I also downloaded the BIOS update, since it mention... Read more

A:"INF Error", VGA Driver "Missing" Installing ATI Catalyst Drivers

the radeon is not integrated with your motherboard, and the onboard video has probably been disabled in the BIOS. to install the appropriate drivers for an ATI radeon 8500 card you need to download and install the drivers from ati's website. from there you can download the latest version of catalyst and install that.
 

Read other 13 answers
RELEVANCY SCORE 87.6

This problem is simly driving me crazy.

here is the problem as direct as possible...

I have an Asus K8V mobo(standard)

On this board there is 2 controller that can use the SATA interface.

One is branded VIA and work flawesly and the other one is from Promise. (376 here)

I do have many hard disks and they all have the 1,5 GB/s jumper on, they all work perfectly on the Via controller...

But i have more then 2 sata device wich mean i need to run the promise controller in IDE mode.. or whatever its called (none-raid)

1 DVD burner sata, 1 HDD sata are on the Via controller. (what ever is plugged there work)

I now need to use the Promise controller in IDE MODE but there is no way i can do this since i dont have the option "operating mode : ide mode" in my advenced option from the bios...

It looks like i'm lock in raid mode. Sometime i just wish RAID never existed in the PC world.

I'm really about to give up on that since i must have wasted a considerable amount of time on that..

I do have the bios 1007 , v.2.54 from asus My Promise chip is identified as PDC203376.

Pls dont tell me i need driver in windows cause i know i need, and since im under winxp64 it might not work at all in the end but i'm not there yet since i dont even see the HDD in my BOOT DEVICE PREORITY list form the bios..

Thks, hope you guys have some clues for me, i'm starting to wonder if downgrading the bios, or if the K8v none deluxe is the problem.

See ya,

Best wis... Read more

Read other answers
RELEVANCY SCORE 87.2

I use "Sumo Updates Notifier" to notify me of various updates. It recently notified me of an update for "Intel Control Center". I presently have version 1.2.1.1007. There is a new update, 1.2.1.1011. Do i need this update?

A:Do I need To Update "Intel Control Center"?

Nope, not if the one you have is working for you.

Why are you using Sumo Updates Notifier ? You don`t need it.

What are you using Intel Control Center for ?

Read other 2 answers
RELEVANCY SCORE 87.2

Hi
Im trying to install Solid Works on Win 7 64 bits.
I need to Change compatibility mode to Windows 7 , but seems there is no such option in the list of compatibility modes.
I went to My Computer > Properties , The Windows is 7 Ultimate 64 Bits . but Why there s no Windows 7 option in the Compatibility mode?
Thanks for further helps
MJ

A:Option "windows 7" is not available in Compatibility mode list

Hello mjapple and welcome to Seven Forums.

Compatibility Mode allows an older program written for an earlier version of Windows to possibly run in Windows 7.

Compatibility Mode

What is program compatibility? - Windows Help

In other words, if you had Solid Works previously installed on a Windows XP computer, you could use the Windows 7 Compatibility Mode to change 7 to XP. But another issue may not be solved with Compatibility Mode. If your version of Solid Works was written for a 32-bit system, it may not work on a 64-bit platform.

You could also contact Solid Works (either their Support link or the Community forum) for additional help.

3D CAD Design Software SOLIDWORKS

Read other 2 answers
RELEVANCY SCORE 87.2

i recently contracted a virus that does the above mentioned things. i have hijack this, prevx, and wintasks. i also have just downloaded norton 2007. can anyone help me fix my ailing computer?

josh
 

A:Task manager disabled, no "run" option, no "turn off" option

oh, i am running win xp sp 2, have a dell dimension 2350, and have already deleted viewpoint manager, but i'm still stuck.

josh
 

Read other 2 answers
RELEVANCY SCORE 86.8

I have been plagued for years by this bug (see attached Mad_Explorer_col.JPG screen dump), and this morning after visiting Tech Support Guy > Windows XP then searching for "Windows Explorer", on page 2 in "Solved: Explorer tree display curiosity, AKA Odd Windows Explorer Bug", page 2, I found the cause and solution brought by Mosaic1 Wed 07 Mar 2007 05:48 GMT:
Do you have the desktop toolbar on the taskbar?​and mrwes Tue 07 Aug 2007 18:34 GMT:
You can get around this by making the toolbar point to the Desktop but using c:\Documents and Settings > (Profile name) > Desktop. You don't see the My Computer and IE icons in the list, but everything else shows up...​Thanks a lot to Mosaic1 and mrwes!

Versailles, Sat 13 Feb 2010 10:34:25 +0100
 

Read other answers
RELEVANCY SCORE 86.8

First things first, thanks to all who can help.....





I need to programmatically make some adjustments to the Internet Explorer security settings. Most of these settings I have found but there are a few I have not been able to get a clear exact location for in the registry. I will be using a .BAT file to make
the adjustments on 100+ PCs.





Here is what I am looking for.....





Under the "Internet  Properties" found in control panel, under the "Privacy" tab there is an "Advanced" option button. When I click on it I get an "Advance Privacy Settings" options box. On it are several settings.
The first setting, "Override automatic cookie handling" needs to be checked in order to access the other options. I can do that by adjusting the DWord value of "PrivacyAdvanced" under the "Internet Settings" key in the registry,
"HKCU\Software\Microsoft\Windows\CurrentVersion\Internet settings", to be specific.





What I have not been able to find are the registry entries for the "First-party Cookies" "Accept, Block, or Prompt" options, the "Third-party Cookies" "Accept, Block, or Prompt" options, and the "Always allow
session cookies" check box. Please see picture below....















I have seen references to the following settings as being where those options exist, but nothing that explains ... Read more

Read other answers
RELEVANCY SCORE 85.2

MS thinks that one of my PCs is running W7 that's not genuine. It is genuine - at least I bought it from Amazon and paid ?141 for it so that - to me - means it's genuine. It may not be but neither Amazon nor MS will take any responsibility for it not being genuine so I've given up with them both. I think that the issue arises because of hardware changes I've made. Oh - yes, I've lost the box with the key on it too.

Long story short. I use this PC very little and when I first first got the black screen and messages after I installed a larger hard drive and reinstated the drive image from an Acronis backup. I stupidly forgot to reinstate the drive signature. Then it happened again when I changed the ITX motherboard.

Now here's the real question. Every now and then it gives me the "black screen" treatment. I fix it by restoring a drive image and turning off W7 updates.
If the damned thing is told not to call home then it shouldn't should it? What's going on? It seems to give me a month or two and then goes psycho on me like HAL9000!

A:How do I stop W7 "calling home" and displaying "not genuine" messages?

If this is an OEM version then I can understand why it's doing this after you changed motherboards, since it is forever tied to the first one it is installed on.

If you can follow these instructions for activation issues,

Windows Genuine and Activation Issue Posting Instructions

The results of that can help resolve your issue.

Filling in your system specs will help as well,

System Info - See Your System Specs

If your installation is valid then there's no reason to turn off updates or try to keep it from calling home.

Read other 6 answers
RELEVANCY SCORE 85.2

Hi everyone. I'm new to the forum. I am running Windows XP SP2 Home Edition.

Background. I was running Windows IE 7.2 beta no problems.
I decided to upgrade to Windows IE 7.3 beta the system would not. I removed 7.2 before trying to install 7.3 beta. I dropped back to IE 6 thinking it would run correctly, but I was wrong.

When I try to move a file using the "Copy to" or "Move to" window, the window frame displays, but there is nothing in it except at the top "Select the place you want to move "x" file, and then at the bottom of the window, "to view any sub folders click plus sign," Move, New Folder. The entire file system is missing where I could select a file to move to, example:
C:\ and all the sub folders are not displayed so I cannot select one. The system still works, but all the files are sent to C:\SW3\F2 which is most likely the last folder I accessed before this whole failure to install mess started.

Is there any way to restore the file system so I can select where I want to send my files when I copy and move without dragging them with two open windows?

Thanks. I have more questions, but this is enough to start with.

I appreciate the help. I really screwed this thing up. I am currently running IE6 with expanded stuff left over from the botched install attempt from IE 7.3 beta.

5Turbo5
 

Read other answers
RELEVANCY SCORE 84.8

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did an SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps\Toolbox\StatusClient\StatusCl... Read more

A:I cannot open "my computer" "control panel" "recycle bin", etc...

You may want to reinstall the operating system.

Backupthe files that are importantto you before you reinstall.

The "New" installation will overwrite the current one

If you do not format your hard drive before the reinstall the installation should not harm your files (That's why I suggest backingup your files) and will speed up the installation process.
 

Read other 1 answers
RELEVANCY SCORE 84.8

When I got this laptop I had Catalyst Control Center when I right clicked the desktop, but when I installed a new driver it changed to AMD VISION Control Center. I didn't really notice anything different other than that.

Is it suppose to change like that, did I download the wrong one or have the wrong one in the start? I did the automatic scan and manually put the information in but they gave the same results.

A:AMD VISION Control Center / Catalyst Control Center = Same Thing?

That's their new name for CCC. They probably had to change it because CCC was associated with ATI.

Read other 1 answers
RELEVANCY SCORE 83.6

I am trying to rebuild by search index because my computer won't let me arrange items using the "Arrange By" option... However, when I try and load my indexing options to rebuild the index it will sit there and say "Waiting to receive indexing status". If I click the "Advanced" button it will freeze... I also receive an icon and loading display problem SEE PIC#1. Also when I click on "My Computer" it sometimes will sit there searching and it won't load. SEE PIC#2

I have tried the following:
1. Restarting the "Windows Search" service multiple times at different boots.
2. Deleting the files contained in the folder "C:\Windows\System32\config\TxR\". http://support.microsoft.com/kb/2484025
3. Stopping the "Windows Search" service then I opened up "regedit". I went to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSearch, SetupCompletedSuccessfully" I changed the value from a 0 to a 1. Then I rebooted my PC. I then went back to the same key and changed it back to a 0 and rebooted my PC again.
4. Turning the "indexing service" on and off from the "Turn Windows Features on or off" menu.
5. Microsoft Fixit Indexing Troubleshooter
6. Sfc /scannow
7. Tried this hotfix http://support.microsoft.com/kb/977380
8. Tried another user account and creating a new user account
9. Tried resetting folder view to "defaults" http://www.sevenforums.com/tutorials/15692-... Read more

A:"My Computer" won't load, Disappearing Icons, & "Arrange By" option won't work. Help?

Read other 13 answers
RELEVANCY SCORE 83.6

The "Idle-time Full System Scan" in Norton 360 v4 is bogging down my computer constantly, and there is no option to turn it off in "Automatic Tasks".

I contacted Norton and (after several attempts to find someone at Norton who could understand what I just said above and getting "hung-up" on over Norton chat. Inexcusable!!!) I was able to get a hold of a technician who told me that Norton intentionally removed this option "for security reasons, because they didn't want people turning it off".

The problem is, people will then be forced to turn it off by turning off ALL scheduled tasks (under "Settings/Scheduling/Schedule:Manual Schedule") and that is an even worse security problem than the relatively small one that would be created by turning off idle-time full system scanning.

Once the system has completed a full system scan, all files are on-access scanned anyway, so running a full system scan every 3-4 days is rather silly and extremely annoying--especially, because it will continue to try to run every time the system is idle if you cancel it.

A warning urging the user to not turn off idle-time full system scans without fully understanding the risks, and after explaining the risks, would be VERY preferable. Or at least the option to run the full system scans when the system is idle on a certain day of the month/week! The schedule for idle-time full system scans really needs to be separate from other tasks. In fact, t... Read more

Read other answers
RELEVANCY SCORE 82.8

Ok where do I begin?! I have been dealing with viruses, spyware/malware for the past week. It all started with Norton advising me that I had been infected with Trojan. Vundo and Trojan.Zonebac. After that I started receiving many different pop ups warning me about critical system alerts. I also had an annoying yellow triangle at the bottom of my screen warning me about different trojans and worms. More evil friends included 2 new icons that had made their home on my desktop one named "Live Safety Center" and the other "Online Security Guide", also installed was a new toolbar named "Security Toolbar 7.1". I have scanned my computer with many different programs and have somehow finally managed to get rid of the pop ups and toolbar, although I know I'm probably still infected somewhere. I'm sorry this is so long but, I wanted to explain EVERYTHING! I'm running Windows XP SP2, and have followed all steps to post. I downloaded DSS, but after many attempts to run, it just wouldn't let me. I do have a fresh hijackthis log and my Panda report, I hope this is good enough.
Many thanks in advance to whomever helps me, I am desperate!
Monica

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:58:35 PM, on 11/15/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe... Read more

A:2 evil friends on desktop "Live Safety Center" and "Online Security Guide" Help?

Hi, thanks for trying to perform all the steps.


Quote:




I downloaded DSS, but after many attempts to run, it just wouldn't let me.




At what stage does DSS stop working?

Read other 7 answers
RELEVANCY SCORE 82.8

Fix for "Tuner Not Found" error and "Receiver service has stopped working" error listed in next post! -- Errors I'm receiving: "Tuner Not Found""Windows Media Center Receiver Service has stopped working.""Welcome - An upgrade is currently in progress."SpecsIntel P4 3GHz2GB RAMVisionTek Radeon X1300Hauppauge WinTV PVR-150 PCI IIWindows 7 32bit1. Tuner Not FoundOkay, the entire install went without a hitch. On opening Media Center I was told that I needed to setup Live TV. When I click the link I was given the dreaded "The TV signal cannot be configured because no tuner hardware was detected." If I run WinTV from Hauppauge I can view TV just fine.MCE ran fine this morning on Vista SP1 before the install.For the tuner issue I have done the following:-Reseated the card-Updated the drivers-Uninstalled the hardware and rescanned/installed the hardware and drivers-All Windows Updates-Uninstalled all references to Hauppauge on the machine and installed JUST the drivers, no Hauppauge software-Adjusted Log On preferences for Windows Media Center services to Local and manually started ehrecvr and ehsched along with cmd line manual starts-Downloaded new codecs from WinDVD and MSFT-Run the WMC Decoder Checkup Utility from MSFT and changed to Miscrosoft DTV-DVD Video Decoder (the utility recommended I change to this -- only one that is MCE compatible -- but once I did it told me that it is incompatible with sync on WMP10 and that... Read more

A:*RESOLVED* Media Center "Tuner Not Found" error, "Receiver service has stopped"

Okay, I resolved the first two issues, Tuner error and ehrecvr error.It had to do with multiple Admin user accounts on my computer. My computer was originally set up with a user Robert Baker with full privileges as administrator. I then also set up a MediaCenter account with full privilidges. For whatever reason the MediaCenter account has access to EVERY action on the computer except starting the ehrecvr service.1.  First set Media Center Service Launcher to log on at NT Authority    Services > Right-Click Windows Media Center Service Launcher > Properties > Log On tab > Log On As 'This account: ' > Type " NT AUTHORITY/LocalService " > Click Apply > General tab > Start service.2. I then set the Media Center Scheduler Service AND Media Center Receiver Service to log on as my other admin account. Same as above but with other account credentials and started the services.3. Reboot and no ehrecvr errors. Since this was a good sign I tried WMC and was able to set up my TV fine.I STILL, however, get the "Upgrade in progress" message when I open Media Center. Anyone know how to fix that? I've run setup again and can't get rid of it.

Read other 19 answers
RELEVANCY SCORE 82.8

I am running Windows 10 Professional 64 bit. Whenever I set the option "Turn off the display" to "Never", it reverts back to the default "15 minutes". This is under the "High Performance" profile. I have never, since Windows 3.11, ever had a setting change itself back. I have tried to change it and restart. It will either revert upon restart or shortly after. It will revert back even if I do not restart.

A:Power Option for "Turning off display" remains at "15 minutes"

That sounds like my problem - I leave the computer for an hour and it is shut down (I think sleep mode). I just need to hit the power button and it comes on to where it was when I left - but 2 of my USB devices are lost so I have to restart the computer anyway.

I changed all the power settings to NEVER. But his doesn't seem to make any difference......

Read other 0 answers
RELEVANCY SCORE 82.8

This began after dumbly going to some non-commercial website. NAV auto-protect did initially detect an infection, but indicated it could not quarantine or delete.

Now when launching IE6, it attempts to redirect to a fake virus software website. When I choose the "not recommended" link, IE crashes shortly afterward. Also, I get a fake "Security Center Alert" popup every few minutes. I stupidly clicked on the link to update the security center.

With System Restore deactivated, I have run (all updated, full scans in safe mode) NAV, Ad-aware, Spybot, SpySweeper, Avira and CCleaner. (Then I found this website and learned I should have waited to do this.) Spybot found a couple of registry entries, but that was the only detection made by any of the programs, other than NAV's initial auto-protect message. File gmer.txt is attached.

dds.txt:

DDS (Version 1.0) - NTFSx86
Run by Mike at 13:22:43.09 on Sat 12/06/2008
Microsoft Windows XP Professional 5.1.2600.2.1252.1.1033.18.2038.1399 [GMT -6:00]

============== Running Processes ===============

C:\Program Files\Webroot\WebrootSecurity\WRConsumerService.exe
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
svchost.exe
svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Common Files\Symantec Shared\... Read more

A:IE crash after "Insecure Internet activity", "Security Center Alert" popup

Before any work can be done on this machine, there is something that requires your immediate intervention.

This machine is messed up pretty badly because you have several anti-virus programs on your machine. That's not a good idea!!

Alike firewalls, anti-virus programs have conflicts co-existing with each other & produces undesirable results. Please uninstall ALL leaving only one of them.

ALL the antivirus programs must be removed via add/remove program.
For any program that doesn't have an add/remove entry, you will have to do this:re-install the program -> reboot -> uninstallPost a fresh logs when you have completed the above task.

Read other 11 answers
RELEVANCY SCORE 82

I'm having the same problem that a lot of people are having. These icons have showed up on my desktop and i keep getting pop ups telling me to download them because i have a virus. i would really applicate the help.
thanks!
John

-- System Restore --------------------------------------------------------------

Successfully created a Deckard's System Scanner Restore Point.


-- Last 5 Restore Point(s) --
91: 2007-11-17 16:39:03 UTC - RP554 - Deckard's System Scanner Restore Point
90: 2007-11-17 15:47:18 UTC - RP553 - System Checkpoint
89: 2007-11-16 15:05:33 UTC - RP552 - System Checkpoint
88: 2007-11-15 01:17:54 UTC - RP551 - Software Distribution Service 3.0
87: 2007-11-13 22:39:57 UTC - RP550 - Removed Banctec Service Agreement


-- First Restore Point --
1: 2007-11-12 23:17:11 UTC - RP464 - System Checkpoint


Backed up registry hives.
Performed disk cleanup.

Percentage of Memory in Use: 81% (more than 75%).
Total Physical Memory: 510 MiB (512 MiB recommended).
System Drive C: has 2.78 GiB (less than 15%) free.


-- HijackThis Clone ------------------------------------------------------------


Emulating logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2007-11-17 11:42:27
Platform: Windows XP Service Pack 2 (5.01.2600)
MSIE: Internet Explorer (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\SYSTEM32\SMSS.EXE
C:\WINDOWS\SYSTEM32\WINLOGON.EXE
C:\WINDOWS\SYSTEM32\SERVICES.EXE
C:\WINDOWS\SYSTEM32\LSASS.EXE
C:\... Read more

A:"online security guide" and "live safety center" deckard log here

Hello and Welcome. Please subscribe to this thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant Notification, then click Subscribe.

Before beginning the fix, read this post completely. If there's anything that you do not understand, kindly ask your questions before proceeding. Ensure that there aren't any opened browsers when you are carrying out the procedures below. Save the following instructions in Notepad as this webpage would not be available when you're carrying out the fix.

It is IMPORTANT that you don't miss a step & perform everything in the correct order/sequence.

---------------------------------------------------------------------------------------------

Please download VundoFix.exe to your desktop. We'll use this later.

Download SDFix and save it to your Desktop.

Please download & install - ERUNT (This is a utility that'll replicate a copy of your Registry)
Start ERUNT, confirm the Welcome message.

Next, select the backup options:

System registry
Current User Registry
Other open user registry

Click "OK" and wait until the backup process is complete. (Note that depending on your system configuration this may take some time, and that the first bar is NOT a progress bar, just an indicator that the program is still running.)
# Note: To ensure proper operation of ERUNT, you should be logged in a... Read more

Read other 13 answers
RELEVANCY SCORE 82

Hello,

I'm running Windows XP SP 3. I have fake "Security Center Alert" popups and "Security Center" popups. A program called "Malware Defense" has also seemed to installed itself onto my computer. And I've just noticed porn icons appearing on my desktop. It's also disabled my Avira software.

GMER doesn't seem to run. I've clicked on it a couple of times but it doesn't seem to do anything. The DDS logs are attached/follows.

Thanks in advance!

DDS (Ver_09-12-01.01) - NTFSx86
Run by zili at 23:28:31.96 on Wed 01/06/2010
Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_15
Microsoft Windows XP Professional 5.1.2600.3.1252.61.1033.18.1022.493 [GMT 11:00]

AV: AntiVir Desktop *On-access scanning disabled* (Updated) {AD166499-45F9-482A-A743-FDD3350758C7}

============== Running Processes ===============

C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\WINDOWS\system32\svchost.exe -k WudfServiceGroup
svchost.exe
svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\stsystra.exe
C:\Program Files\CyberLink\PowerDVD DX\PDVDDXSrv.exe
C:\Program Files\Google\Gmail Notifier\gnotify.exe
C:\WINDOWS\system32\rundll32.exe
C:\Program Files\ATI Technologies\ATI.ACE\Core-Static\MOM.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\WI... Read more

A:"Security Center Alert" popups, "Malware Defense" self install

Let's try this version of gmer.


Download GMER Rootkit Scanner from here to your desktop. Double click the exe file.
If it gives you a warning about rootkit activity and asks if you want to run scan...click on NO, then use the following settings for a more complete scan.



Click the image to enlarge it


In the right panel, you will see several boxes that have been checked. Ensure the following are unchecked Sections
IAT/EAT
Drives/Partition other than Systemdrive (typically C:\)
Show All (don't miss this one)

Then click the Scan button & wait for it to finish.
Once done click on the [Save..] button, and in the File name area, type in "Gmer.txt" or it will save as a .log file which cannot be uploaded to your post.
Save it where you can easily find it, such as your desktop, and attach it in reply.

**Caution**
Rootkit scans often produce false positives. Do NOT take any action on any "<--- ROOKIT" entries

Read other 4 answers
RELEVANCY SCORE 82

I reformatted my computer recently, with all the same hardware and software I usually do, but this time I noticed something different.

On my E: partition (non-system), there is a folder called "9ca233a934811ecf86022b48e5" which contains two folders: "AMD64" and "i386".

I researched a little bit, and found out those folders pertain to a windows 64-bit edition, but I don't have anything to do with a 64-bit edition, mine's a 32-bit.

Here's my system specs:WinXP Media Center Edition Version 2002 SP3
Intel Core 2 Duo Processor E6300
3GB RAM
NVidia GeForce 7600 GS 512MB
ST3300831AS 300GB HD
I have my HD partitioned to 3 drives:14GB System Drive (C:)
40GB Document Drive (D:)
190GB Storage Drive (E:)
I also have 40GB partitioned as an Acronis True Image Home Secure Zone, for storing Disk Images.

I was wondering why those two folders are on my E: drive, when I'm running a 32-bit version of Windows. Also, (sorry if this should be in another thread) my computer has been restarting unexpectedly while I've just been doing random things on it. Nothing graphics-intensive, or anything like that, so I don't know why it's doing that either.

Thanks for your help and time,
Nic

A:"AMD64" and "i386" folders on WinXP Media Center 32-bit edition

It sounds like those are temporary files from a driver installation. A lot of companies seem to package every possible driver in the zip or executable, extract them all to the hard drive, find the one the system needs and copy it to the system32 directory, then leave the rest behind.

In that case they should be safe to delete. It would take a bit more research on your part to make sure. Maybe a readme or help file somewhere in the directory?

Read other 3 answers
RELEVANCY SCORE 82

I don't have a clue where to begin trying to fix this problem. Spybot doesn't seem to fix the problem. I keep getting random icons on my desktop and start menu called "online security guide" and "live saftey center". There are also many fake balloon warnings appearing and a window titled "Critical System Warning!" that wants me to download stuff. What process can I go through to clean my system. Any help would be great...thank you!

A:i need help - "online security guide" & "live safety center" icons!!

Please follow MicroBell's 5 Step process outlined here:

http://www.techsupportforum.com/secu...tml#post342651

After running through all the steps, please post the requested logs.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Read other 1 answers
RELEVANCY SCORE 81.6

I have searched to see if this was asked before without any success. Maybe someone has run into this problem before.
When I open "my computer" or "control panel" after I close it...it automatically goes into Internet Explorer as a blank page. Most of the time, when I close the IE blank page...it stops responding and I have the control-alt-delete to "end the program"
Thanks in advance for any help.
 

A:closing "my computer" or "Control Panel" open internet explorer window

Possibly malware - anything openning ie on its own raises an alarm in my books. Post a HJT log to the malware removal section of the forum and let the experts take a look at it
 

Read other 3 answers
RELEVANCY SCORE 81.6

Hi,

Yesterday I was uninstalling catalyst 12.6 for the 12.7 beta. As the Catalyst Install manager was uninstalling the drivers, the screen went black. This is obviously normal--but in this case it stayed black, even though I waited for 15 minutes. I then did a hard restart and, after finishing uninstalling the drivers in safe mode (the initial attempt didn't do the trick) and cleaning with Driver Sweeper/Driver Fusion, I installed 12.7. Everything works fine BUT Catalyst Control Panel is screwed up---there is the 'game ad' internet image in the middle but none of the tabs and settings are visible or accessible. Please see the attached screen shot. The settings can still be accessed through the taskbar icon (but this is quite limited i.e. I can't access overdrive). I repeated the uninstallation/cleaning process again (the same perma-black-screen issue arose) to downgrade to 12.6 (which previously had no issues) but the control panel problem persists. I installed all windows updates and reinstalled windows .net framework. Any other ideas please?

A:Catalyst Control Panel not displaying correctly

Should fill out your specs and i would have installed the beta over 12.6 for the reason you can roll it back

if you are using a 7000 series card that is one of the many issues that will happen but i am just assuming since you have nothing posted about your Machine

so please give us more information to help you better

Read other 2 answers
RELEVANCY SCORE 81.6

I saw a few posts about enabling Dolby Home Theater within my Realtek driver. Downloaded the latest driver. Went to the PCEE folder to run the Dolby Home Theater msi. Then got the error message, "PCEE needs to be installed".

Can someone help me out?

A:"PCEE needs to be installed" when trying to enable Dolby Home Theater

The only Dolby that I know of is a separate application, and not part of RealTek. e.g. I have a Lenovo Laptop with RealTek audio and Dolby, but the Dolby is a separate application. My desktop systems that I have all have RealTek audio but there is no Dolby. Both of my desktop systems come with SoundBlaster Advanced Motherboard audio enhancements for the RealTek but it is a separate program, supplied with the Motherboard software and did not come from RealTek.

Do you have Dolby software? The specs for the ASRock P55 Pro do not specifically state Dolby. It does say " Premium Blu-ray audio support" whatever that is.

Read other 8 answers
RELEVANCY SCORE 81.2

The control panel opens fine. I can access all items in the control panel
except "Network and sharing center" and the "User accounts" (I can't access this sections via the taskbar either).

What happens when I open one of the two items is I get a popup saying the
following; WINDOWS EXPLORER HAS STOPPED WORKING.

I used to be able to access these items. And one day, I just coulodn't anymore...

Anyone knows how to solve this? Thanks.

I'm using Vista Ultimate x64

A:Can't access "Network and Sharing Center" nor "User Accounts"

Hello Newbie,

See if running a sfc /scannow can find and fix bad system files that may be responsible for this.

Hope this helps,
Shawn

Read other 16 answers
RELEVANCY SCORE 81.2

Srry i know this post is a bit old but i recently just got this problem i can access the internet fine but i cant access my network settings, user settings, or see the the properties of my pc. i tried running your solution Brink but the scannow showed

"Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>sfc /scannow
Windows Resource Protection could not start the repair service.
C:\Windows\system32>"

i then ran sfc /verifyonly but got the same answer.

i then ran findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >%userprofile%\Desktop\sfcdetails.txt. and the txt file came up blank.

idk wat to do rite now i am at my witts end.

A:Can't access "Network and Sharing Center" nor "User Accounts"

Hello Jayrrus, and welcome to Vista Forums.

I would recommend that you use Microsoft Standalone System Sweeper to scan your system with at boot to help make sure that your system is malware free first.

Afterwards, you might see if you may be able to do a system restore at boot using a restore point dated before you had these issues to see if that may be able to fix them.

Hope this helps,
Shawn

Read other 7 answers
RELEVANCY SCORE 81.2

My son uses his computer on the net a lot and of course there is a virus out there waiting to serve its twisted master.

He got the wellknown "Live Safety Center" and "Online Security Guide" and it keeps comming back and hijacks his internet browser to redirect to the same page that promises peace and wellbeing for money ... of course.

Here is the DDS log:
"
Deckard's System Scanner v20071014.68
Run by Emil on 2007-11-10 20:43:53
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- HijackThis (run as Emil.exe) ------------------------------------------------

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 20:44:39, on 10-11-2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16544)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Programmer\Alwil Software\Avast4\aswUpdSv.exe
C:\Programmer\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Programmer\F?lles filer\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\WINDOWS\system32\agsdyely.exe
C:\Programmer\F?lles filer\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\Progra... Read more

A:Need to get rid of "Live Safety Center" and "Online Security Guide"

I did follow MicroBell's 5 Step process and the Panda scan said that no virus could be found. However, my Avast anti-virus warned me 5-6 times about files while I was running the Panda virus scanning. One of them was named "win.exe" and was in C:\temp\ but has now been deleted. Every time Avast issued a virus alert I chose the option to delete the file in question.

Read other 19 answers
RELEVANCY SCORE 81.2

I don't have a clue where to begin trying to fix this problem. I keep getting random icons on my desktop called "online security guide" and "live safety center". There are also many fake balloon warnings appearing and a window titled "Critical System Warning!" that wants me to download stuff. What process can I go through to clean my system. I didn't have this problem until I upgraded to Norton 2008. I am currently running IP tool antivirus and spyware, I also have ran Smitfraudfix, still getting pop ups like crazy. Also my IP tools is finding Trojan.Virtumonde. I use Quicken and it seems to have attacked it because I am no longer able to use it. Any help would be great...thank you!

A:"online security guide" and "live safety center"

Hi and welcome to TSF.

Apologies for any delay in replying, but we have been rather busy lately, and, of course, all our helpers are volunteers.

Since it has been a few days since you first posted, please follow these instructions if you still need assistance.

Download Deckard's System Scanner (DSS) to your Desktop . Note: You must be logged onto an account with administrator privileges.Close all applications and windows.
Double-click on dss.exe to run it, and follow the prompts.
When the scan is complete, two text files will open - minimised > extra.txt and maximised > main.txt.
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of main.txt back in this thread (do not attach it).
Please attach extra.txt to your post.


To attach a file to a new post, simplyClick the[Manage Attachments] button under Additional Options > Attach Files on the post composition page, and
copy and paste the following into the "Upload File from your Computer" box:C:\Deckard\System Scanner\extra.txt

Click Upload.

I will monitor this thread for your reply.

Thank you for your patience.

Read other 1 answers
RELEVANCY SCORE 81.2

I recently had my computer crash due to a TROJAN virus and at that time I had Windows XP service pack 3 which my computer man installed for me. After being infected I had to completely reinstall EVERY thing on my computer taking my computer back down to Service Pack 1 the only operating disks I had. Now when I do a Disk Clean Up, it doesn't have the option to "Compress Old Files." Can some one please tell me why this option is not there and how I could go about fixing this. Thank you.
 

A:"COMPRESS OLD FILES" not and option in my "Disk Clean Up"

Read other 6 answers
RELEVANCY SCORE 81.2

Decided to update my GPU driver ATI mobility radeon 550v ( version 8.692 ) and the ATI CCC 10.1 to the latest 11.2 and the GPU driver. GPU driver can be installed and uninstalled with no prob... the prob was with the ATI CCC 10.1 . Did not uninstall this and went str8 to the new installation update. GPU driver updated succcessfully but the ATI CCC was without 3D options and others etc. Left with Display Center and Power Supply option. Nth else was there... did the uninstalling from the ATI CCC installer but was not successful. "No Files were detected for the removal"

Did the Control Panel thing and was not successful. Click on Uninstall/Change mouse showed loading icon after that nth happens, Run CCleaner in safe mode and still the same issue. Unable to remove it with CCleaner nor CTRL Panel nor CCC installer. Did try to manually delete files and folders for ATI Technologies on C:Programs Filex86/ATI Technologies. Prompted " ...program being used by another person or program..."

begin another test, install the same 10.1 CCC downloaded from ATI official site so that i can uninstall it again, nothing appears to be installed in that folder. it was like blank installation. No error message... installation log all were successful. Tried to uninstall after that .. no can do... had been trying for 2 days.. really appreciate some help here.

A:GPU Control Center issue (ATI Catalyst Control Center ) NEED HELP!!!!

see here on how to completely scrub out old drivers..
TweakGuides.com - ATI Catalyst Tweak Guide

don't forget to run a registry cleaner to remove all old "stubs" etc..

Read other 9 answers
RELEVANCY SCORE 81.2

Hi all, I have a home theater pc that is crashing when I am not actively using it (though who knows what is going on in the background...). Attached is my sf tool output. Any help is much appreciated! Thanks!

http://www.sevenforums.com/attachmen...1&d=1374681547


(Note: I posted this on the sister vista forum, but it wasn't receiving any responses for a while, so I asked the mods to close my thread there as I was planning on posting here).

A:BSOD on home theater pc, crashed when "idle"

I've requested our richc46 to take a look at your thread.
Do wait for a response from him.

Read other 3 answers
RELEVANCY SCORE 80

We used to have "stereo mix" option that enabled streaming audio recording without having to have the audio playing through the speakers. How do I do that now? What replaces that capability? Who makes my sound card? Why is that not readily available somewhere in Dell land? I can't believe forum searching found pretty much nothing on this.

Read other answers
RELEVANCY SCORE 79.6

Hey,
I have a HP Pavilion notebook. A bit older I think. It had built in windows Vista Home Premium. Somehow my hard disk crashed and I bought a new one. I installed windows 7 ultimate 32 bit and updated to service pack 1. I made a system image using windows default recovery console. Everything was fine. But today I needed to restore my computer to a previous restore point. Every time I press F8 to get to the advanced boot option I see everything is okay except the "repair your computer" option. Somehow the "repair your computer" option disappeared. I tried ctrl+F11 button and the F11 button too. F11 button worked for my previous vista home premium but for Win-7 it's the F8 key. Can anyone help me with this please? How may I get the "repair your computer" option back? Is there any way to edit advanced to boot option to get that option back? I would be needing it in case of system image recovery. Please I don't want to reinstall the O/S once again. Please somebody help me.

A:Advanced boot option doesn't show the option "repair your computer"!

On my clean OS install, the "repair your computer" option also does not appear in the F8 Advanced Boot Options list.
The option does appear on my ACER PC.

You can access this option by booting from a System Repair CD/DVD. A system repair CD is a must have.

Read other 9 answers