Over 1 million tech questions and answers.

ThinkPad Ultra Dock Firmware Update

Q: ThinkPad Ultra Dock Firmware Update

Hello, is it possible to update the Lenovo Ultra Dock Pro to the latest version without a Windows Operating System? https://support.lenovo.com/de/en/documents/ht081248 A bootable ISO for this would be perfect. I use Linux as Operating System installed on a T440p, so a Windows based update is not possible for me. Thanks in advance! Best regrads, Michael

Read other answers
RELEVANCY SCORE 200
Preferred Solution: ThinkPad Ultra Dock Firmware Update

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 109.2

I have a W541 and it always worked well with the dock and dual external monitors, that is until the firmware was updated by Lenovo System Update to the Latest Version: 2.33.000 about a week ago. Now when you boot the laptop in the dock, the post shows on the two external monitors then they go black and seem to disconnect as the power saving icon shows on both monitors. If you undock the laptop at this point and immediately re-dock, the two monitors light up and no more issues. While this isnt a huge issue, it is very annoying since it always worked properly before the update. Any suggestions on a possible fix are much appreciated. Thanks in advance.

Read other answers
RELEVANCY SCORE 98.4

Hi, I installed the most recent firmware update (fwdphb07) and run into problems with my T450s: My displays (two attached via DP, the main display with DP 1.2) stay blank until the windows login screen shows up (no windows is starting screen). The problem is that I have a SSD password so the password dialog is not shown on the external screen. I downgraded the firmware to fwdphb06 (installed fwdphb03 before, because fwdphb06 does not allow for a direct downgrade) and everything works fine again. @Lenovo: can you please fix this issue - if you need more information please contact [email protected] users with the same issue: try to downgrade the FW Have a nice dayMichael  

Read other answers
RELEVANCY SCORE 98

Hi, Everyone. Got me a nice little x270 to replace my old x201.  Happy enough with the machine, but getting it connected to my accessories (monitor, keyb, mouse, ethernet) is a bit of a chore. This machine appears to have a "proper" dock port on the bottom.  Is there a compatible ultradock available for the model 20HN x270?  By proper - I mean, Not USB.  A nice dock I can simply drop the machine into when I'm at the home office.. Thanks!

Read other answers
RELEVANCY SCORE 98

 Has a solution ever been provided for this.  Several models are doing this.  https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/Bitlocker-PIN-USB-C-Thunderbolt-dock/m-p...

Read other answers
RELEVANCY SCORE 98

I have read a lot and tried updating the firmware - nothing works.When I put the laptop in the docking station - it does not recognize the monitar and also says AC power is not connected when it is. Help appreciated!

Read other answers
RELEVANCY SCORE 85.2

Hello, We have a problem with 2 laptops (ThinkPad X270) that "freeze" on the LENOVO logo when using Lenovo Ultra Dock with monitor Dell UZ2715H.Display Dell is plugged by Display port ports and one USB 3.0 (9 pin - used for display integrated webcam) connected to ThinkPad dock.When notebook turned ON with connected USB 3.0, computer freeze on LENOVO logo (To interrupt normal startup, press Enter) and work only when USB 3.0 disconected, or turned OFF and again Turned ON. Firmware on Dock is 2.33.000 Any suggestion? 

A:Lenovo ThinkPad Ultra (Pro) Dock + ThinkPad X270 (20K6) + Dell UZ2715H

I am just going to guess that computer is trying to boot via USB, so you might try changing the boot order in the BIOS so that Windows Boot Manager or the HD is first.  

Read other 1 answers
RELEVANCY SCORE 85.2

Wifi disabled and can't open to search on ThinkPad T470s after pulgging in ThinkPad Ultra Dock ThinkPad T470s 20HG

ThinkPad Ultra Dock - 90W USAfter unplugging from ultra dock, wifi will be connected... Does this dock support wifi?

Read other answers
RELEVANCY SCORE 81.2

Hi, I am looking for some help, I have a T450 that has been working away on a Thinkpad Ultra Dock with no issues, then all of a sudden it will not charge while docked!! Take it out of the dock and charge directly and it works fine, I tried replacing with a new docking station the exact model but again it does not charge the laptop while in the dock, I have switched out the battery and it is still the same. I have fully updated the BIOS etc and still have the same issue, I tried updating the Ultra Dock firmware but run into issues as the firmware update will only run while docked and also has power, but as the laptop is not detecting power I cannot proceed , I tried updating out of the dock but it does not proceed either as it cannot detect the docking station. Everything else works via the docking station HDMI, USB, DVI, Ethernet  all working perfect, has anyone came accross this issue?

Read other answers
RELEVANCY SCORE 80.4

Hi,  I'm using a Lenovo P51 with M2200 graphic card and have a docking station 40A2. I wish to connect the two monitors to my docking station, one is VGA cable and another one is HDMI. When I dock my P51 to the docking station, the monitors could not be detected. I tried to configured my bios setting to discrete graphic setting but nothing changed. Try to put shared on dock display also but nothing works.  When I connected one of the monitor HDMI cable to the laptop directly without going through the docking station, it works perfectly but I could not connect the VGA cable monitor to the laptop without a converter and it defeat the purpose of having a docking station.  Anyone encounter this problem and has a solution for this problem? 

Read other answers
RELEVANCY SCORE 80.4

When connected to the Thinkpad DisplayLink, the driver shuts off useability of the Jack sound ports (on both the computer and the display link). Earlier I could not initiate the driver installation of my USB-ports, and thus could not use the rest of my computers' USB ports -- The Display Links' Ports work. This issue was solved when connencting to the port while the DisplayLink was disconnected.I was connecting a Samsung phone System & Device Firmware/ USB Composite Devices: 10.0.16299.15 peripheral Jack Driver vers. 10.0.16299.15DisplayLink driver vers. 8.3.1905.0USB Root Hub, USB Hub Drivers SuperSpeed and not: 10.0.16299.334USCI USB Connector Manager: 10.0.16299.251eXtensible Host Controller 3.0 10.0.16299.431SAMSUNG Mobile USB Composite: 2.12.5.0Phone Driver: Samsung Galaxy S7: 2.9.317.215Realtek Driver: 6.0.1.8224DisplayLink//Lenovo Audio: 8.3.1888.0 most of rest of drivers are firmware vers.: 10.0.16299.15my processor driver vers is 10.0.16299.371

Read other answers
RELEVANCY SCORE 80.4

Hi,  I have Lenovo ThinkPad L540 and Basic Dock and I want to upgrade dock to Ultra Dock 90W 40A2. I have question about external displays. My setup is 3 monitors Benq GL2250. Right now there are two monitors connected mini-DP on Laptop and VGA in Basic Dock, third one is inactive right now. Could I connect all three monitors to Ultra Dock and have working laptop display simultaneously. I just want to be sure about this solution working and which ports could be used to connect monitors Thanks in advance

Read other answers
RELEVANCY SCORE 80.4

I am running 2 monitors (Dell U2414H @ 1920 x 1080 60Hz) on my ThinkPad USB 3.0 Ultra Dock.  I also have my Yoga 900 monitor on and the desktop is extended to all monitors.  I have a regular issue where the Displayport monitor turns off for 1-3 seconds then comes back on for no apparent reason.  I have searched the internet and the only similar issue I have found suggestes the dock is under powered to run 2 monitors however that does not seem consistent with what other people are doing.  There is no particular application that causes the issue. Can anyone help?  It's very frustrating waiting for the monitors to come back on. 

Read other answers
RELEVANCY SCORE 80.4

Trying to figure out how to charge my Yoga 3, while using my new Thinkpad Ultra docking station. The power USB for the Yoga 3 and docking station USB only work in the Yoga 3 power port. None of the other USB ports on the Yoga 3 will work. Do I need an adapter? 

Read other answers
RELEVANCY SCORE 80.4

I'm trying to find a replacement cord for an Ultra Dock that works with a T450s Thinkpad.  Can someone look at theirs and let me know what I need to order?  Suggestions as to where to order also appreciated. 

Read other answers
RELEVANCY SCORE 79.6

Hi.  I'm hoping I can get this resolved on this forum.I just got my system and am trying to connect my 3 external monitors.    My setup is as follows:Monitor 1 - laptop screen - works.Monitor 2 - HDMI out to HDMI in - worksMonitor 3 - DP out to HDMI in via a DP-HDMI cable.  - worksMonitor 4 - DP ou to DVI in via a DP-DVI adapter - doesn't work. I can't figure out how to make this work.I also tried this setup:Monitor 1 - laptop screen - works.Monitor 2 - VGA out to VGA in - worksMonitor 3 - HDMI out to HDMI in - worksMonitor 4 - DP out to HDMI in via a DP-HDMI cable.  - doesn't work. Incidentally in this configuration, when I closed the laptop screen this monitor worked.  Also on a related note, the Nvidia Quadro P500  is sitting idle as the Intel UHD 620 is doing all the work.  How can I control this? Thanks for any suggestions. Sal

A:Thinkpad P52S Ultra Dock and 3 External Monitors

As stayed in PSREF, P52s supports up to three independent displays. Laptop's screen includes in this limit, meaning you can use two external displays at that time. When you close the lid, you can use three external displays. To use more, you'll need some sort of USB adapter to increase such a limit. Regarding other question, you can't disable Intel GPU - it's always active and it's always controls screen output. NVIDIA's dGPU can be configured to be used in selected applications, making them to work with higher performance. P52 and P72 for sure have an ability to disable Intel iGPU, giving the control of screen output to dGPU. Probably P1 and/or X1 Extreme have the same feature too.





------...

Read other 1 answers
RELEVANCY SCORE 79.6

Yesterday, I updated my T450s and, among other updates,I updated the Ultra Dock 90W firmare to version 2.29.00.  Afterward, when the laptop is docked, with the cover shut, and I try to power up the unit, it won't do so.  When I open the laptop in the dock, the power indicator is green and there is a green light on the function key.  No matter what I try, the machine won't power up after this.  If I force it to shut down and then try to power it up open instead, it powers up normally and both the laptop screen and the attached monitor work and, if I close the cover after, the attached monitor still works.  Obviously, I can use the machine docked with this work around, but I can't figure out why it won't work when I try to poweer it up closed.  I subsequently updated to version 2.30.00 and the behavior continues. What am I missing here? 

Read other answers
RELEVANCY SCORE 79.6

Hi,  I am trying to connect three external monitors to my Ultra Dock (2 displayport, 1 hdmi). When I connect the 2nd displayport cable to the dock, the hdmi monitor shuts off. Is there any workaround? Apologies if this is a basic question. Thank you!

Read other answers
RELEVANCY SCORE 79.6

Hi there, when I undock my X280 from the Ultra dock (notebook closed but running) and open the lid the device will not respond to keyboard or trackpoint input.I need to close the lid again which triggers entering 'energy saving' mode.Then opening the lid again will resume everything to normal. I can reproduce this every time on two identical Docks. Funny thing is, my wifes identical X280 does not show this behaviour but works fine. Any idea what I could try to solve this small (but a bit annoying issue)?Thanks.Q.    

Read other answers
RELEVANCY SCORE 79.6

Hey guys,I've got new P50s (running W10 x64) with Quadro M5000M, and Ultra docking station for it. I want to use 4 external monitors in any configuration, just that they all work. I tried updating BIOS and Docking station, installed latest Intel and Nvidia graphics driver, power management driver.. everything.I get 4 monitors displayed in Windows display settings, but as soon as I turn on the fourth, one of the others goes dark. Somewhere I read about BIOS setting for Hybrid graphic, but I don't have such setting in BIOS. Any help would be great Thanks!

Read other answers
RELEVANCY SCORE 79.6

Hello everyone,that's my question:I put the notebook on the docking stationg (lid shut). I push the docking's power button and the notebook turns on (obviously everything's working fine).The only thing is that the led of the docking is totally off, while I guess it should be green as the notebook power button is.Is the power button supposed to be green or this is the normal behaviour?The notebook firmware is the latest one (BIOS LENOVO N1KET19W (1.06 ), 10/03/2016).ThanksGiovanni

Read other answers
RELEVANCY SCORE 79.6

 Hello everyone,that's my question:I put the notebook on the docking stationg (lid shut). I push the docking's power button and the notebook turns on (obviously everything's working fine).The only thing is that the led of the docking is totally off, while I guess it should be green as the notebook power button is.Is the power button supposed to be green or this is the normal behaviour?The notebook firmware is the latest one (BIOS LENOVO N1KET19W (1.06 ), 10/03/2016).ThanksGiovanni

Read other answers
RELEVANCY SCORE 78.8

I have ThinkVision monitors connected via VGA and the display port. I have a 4k TV connected to the DVI on the back of the docking station. I am able to extend my desktop on the two ThinkVision monitors but I am not able to detect the TV to use for my third. 

Read other answers
RELEVANCY SCORE 78.8

Hiis there a benefit of the ultra dock 170w for L570?https://s3.amazonaws.com/isby/lenovopartnernetwork.com/upload/4/docs/presentation-thinkpad-docking-s... I?m interested in 3 things -  1) I want external display digital UHD @ 60Hz & analog FullHD @ 60Hzthe dock offers that, and no more at 60Hz, and to my understanding disables the built in laptop graphics ports, which also offer that - so what?s the benefit? 2) I want good amperage on usb 3.0 ports - does the 170w dock offer more power via USB than built-in laptop ones? 3) Does it disable the built-in USB? Thanks! 

Read other answers
RELEVANCY SCORE 78.8

I'm using a Lenovo Thinkpad Ultra usb 3.0 dock (40A8) with two 1080p monitors (HDMI + DisplayPort). Using the display on the laptop as my third monitor. I have my USB mouse and keyboard plugged into the dock as well as headphones and gigabit ethernet. I also have a second gigabit ethernet dongle plugged into one of the usb ports on the dock. The dock is paired to my Thinkpad P52 workstation. My issue is that while I'm working my display will freeze (mouse, keyboard still responsive on laptop monitor). Then I'll hear the USB disconnect sound, my screens will go black, then they'll come back a few seconds later as if everything is normal. My network connection drops momentarily as well. At first this was just annoying but I've recently moved over to a soft phone and now this causes big problems. When the dock 'restarts' I lose my audio connection to the phone and the brief network connection drop causes my call to drop. I've tried all the basic stuff such as updating the DisplayLink drivers to the latest, turning off USB selective suspend in power settings, using a different usb port. Is this problem specific to my dock or is anybody else experiencing this issue?

Read other answers
RELEVANCY SCORE 78

Hi I have searched on Lenovo's pages and cannot find any documentation that confirms that "Thinkpad Ultra Dock" docking station (in my case 40AJ0135EU) is compatible with the latests T490(s)/T590(s) series. Does anyone know? ThanksKind regards

Read other answers
RELEVANCY SCORE 78

When the P50 is docked with the lid closed, my two Dell 23" monitors (P2317H) connected via  2 Display Ports both recieve a signal from the dock. When the lid is opened, one monitor will lose signal. I have updated the Nvidia driver on the P50, as well as the firmware on the dock, which did not resolve the issue.  I have also tested this with a differnt P50, dock, monitors, and cables with the same result. OS: Windows 10 64-bitHardware: Lenovo ThinkPad P50, Lenovo ThinkPad Ultra Dock 40A2, Dell 23" Monitors P2317H 

Read other answers
RELEVANCY SCORE 78

I have a brand new Lenovo ThinkPad L470 (win 10 pro) and a Lenovo Pro Dock. This configuration does not support two digital external monitors (don't get me started...) I want 2 digital external monitors.  Does anybody know if I will be able to support 2 external DisplayPort monitors if I purchase the Lenovo Ultra Dock?  thanks. 

Read other answers
RELEVANCY SCORE 77.2

Hi guys, I'm requesting Lenovo to please add on lvfs (https://fwupd.org/lvfs/) firmwares for the docking station 40A2 The issue I'm having is https://support.lenovo.com/us/en/solutions/ht101460 this "User is experiencing intermittent video loss on external monitor" yes, with 2 different 40A2 currently running Fedora 29 on kernel 4.20 thanks

Read other answers
RELEVANCY SCORE 76.4

Hello every oneI've problem with my lenovo l560 and try describe my problem. 1. When i connected laptop with close cover to the dock station i will get screen on the external monitor.2. When i connected latptop with open cover i've screen on external monitor and on the laptop Problem starts when i connected my laptop with close cover to the dock station then open them. I've only screen on the laptop but none on external monitor. I must use  keys combination like "windows + p" and choose  extent screens to display screen on laptop and external monitor but when i disconnected laptop from dock station and connect again that the same problem. What can i do to solve this problem?My configuration:intel core i5-6300U 2.4 GhzIntel HD 520Windows 10 pro   

Read other answers
RELEVANCY SCORE 75.6

I have a Thinkpad W540 with a Lenovo Ultra Dock Docking Station (40A20170US). Here is the set up I am trying to get to work:Display 1) VGA Planar PL2010M monitorDisplay 2) DVI Planar PL1910M monitorDisplay 3) DisplayPort Lenovo L2251x Wide monitorDisplay 4) LCD monitor (off) When I have selected Standard Mode under the BIOS display settings, I am able to connect two monitors plus the internal LCD at the same time: one on VGA and the other on DVI, or I can connect one on VGA and the other on DisplayPort.  This allows me to have three displays, including the LCD.  My problem is that I am unable to get a third monitor to work as well.  When I connect a monitor via DisplayPort, the monitor on DVI stops working.  After reading forum posts and whatever else I found online, I learned (maybe I'm incorrect?) that I need to switch to Advanced Mode in the BIOS to be able to use three external monitors.   I then uninstalled drivers (the BIOS instructions state that you are supposed to uninstall graphics drivers before switching to Advanced Mode), switched to Advanced Mode in the BIOS, started up the computer, reinstalled the latest drivers, but now the only screen working is my laptop's LCD screen.  None of monitors are detected by Windows no matter what I try. When I switch back to Standard Mode in the BIOS, two of my external monitors begin working again. My docking station firmware is updated FYI.   Any suggestions ... Read more

A:Unable to connect to 3 monitors to Ultra Dock (Thinkpad W540) in Advanced Mode BIOS Setting

So I fixed the issue for myself and just wanted to post in case somebody else had the same issue.  I took the following steps to fix the issue:[Background: BIOS is in "Standard" display mode to begin with; I had already updated the docking station's firmware first with a program called fwdphb03.exe and then with Lenovo's update utility.]1) In Windows, I uninstall drivers for the Intel Graphics and K1100 dedicated card.2) Restart, go into BIOS, switch to "Advanced" mode under the Display tab.  I also have the option selected to start up on the docks in the BIOS Display tab.3) Booted into Windows (8.1) and it looked like the Intel Graphics drivers were automatically downloaded. I then ran Lenovo's System Update utility to get the latest video drivers.  Under the optional tab in the Lenovo update utility, I selected the "Optimus" drivers and hit download/install.  It installed, and I had to restart.4) Booted into Windows again, ran Lenovo update utility again, and again it had a video driver to install when I checked for updates.  I installed that, had to restart again.5) Booted into windows, checked screen resolution and saw that no external monitors were showing.6) I then decided to get a driver straight from the source.  Downloaded: the following file from  Nvidia: 334.95-quadro-notebook-win8-win7-64bit-international-whql.exe.  I ran the installation, it did a "Clean" installation with everything checked off. It automatically unins... Read more

Read other 5 answers
RELEVANCY SCORE 73.6

Hi there, my Helix laptop (purchased a few years ago) is giving me the "Keyboard Dock Fan Error" at startup. I am then unable to use the keyboard and mouse pad. I previously had this same error a couple of years ago and had solved it using the Firmware update.Now I tried:- BIOS update. Done updated to the latest BIOS version.- Tried doing again the firmware update (although I had done it a couple of years ago) but now I have Windows 10 and the firmware update executable on the Lenovo site says it is for Windows 8 or below. I tried it anyway but it gave an error saying: "This tool and EC firmware mismatch, or communication error is happened.".  Your help is much appreciated.- Najib

Read other answers
RELEVANCY SCORE 72.8

Hi, i have a T470 that connects to a UCB C Lenvo thunderbolt dock, occasinly it requires the firmware to be updated (i done this last month) however it is erroring again saying i need to conncact my pc manufacturer for new firmware, i have just checked and there is no new firmware on the lneovo website, i installed all the latested packages that were there, does nayone know where i can get the new firmware and if there is any workaround? The dock is not showing as connected in the dock software window, however the dock light goes from yellow to white when i polug it into the laptop, so it does see the connection they just cant talk to each other. Thanks 

Read other answers
RELEVANCY SCORE 72

Dear all, having just updated my the firmware of my Ultra Dock (40AJ0135EU) via Lenovo Vantage to V5.0.6.1, there is now something truly wrong with the power supply; on startup, I am greeted by the famous "low wattage" screen and when using windows, the battery is slowly drained (Lenovo Vantage claims that a 25 W USB-C adapter would be connected instead of the 135 W one). The issue never occurred prior to the firmware update and consistently shows up for any other power cable (trying several ones, including 90 W). So while the "low wattage" screen is annoying, the more severe issue is the constantly drained battery which makes using the dock basically impossible over time. Any ideas? I did not find a way to undo the firmware update - or is the recommendation to wait and hope for yet-another firmware update that (may) solve the issue? Maybe someone has a similar issue and a better / working solution Thx!

A:Low wattage issue T480 after dock firmware update

 By chance did airplane power mode get turned on? The only way I know to check this is in the Lenovo "Vantage" tool 

Read other 1 answers
RELEVANCY SCORE 72

Hey all! I can't seem to get my firmware to update....I just get this: Has anyone seen this and have any advice? I've consulted Google and the forums here and can't seem to get any leads. I'm running a T480 with the latest updates per the support site and the System Update 5 tool. Thanks in advance! 

Read other answers
RELEVANCY SCORE 72

I have a T460 Thinkpad on a Lenovo Pro Dock 90w with LG 29UM68-P ultrawide monitor running at 2560x1080.  My docking station was manufactured in December 2016 & I am using the included 90w power adapter.  My monitor has built in speakers (using Intel Display Audio drivers), so my DisplayPort cable is carrying both audio & video. I have two symptoms of signal loss:  audio cuts out intermittently when playing music (or watching videos w/ sound) & the screen will periodically go dark with a "no signal" message.  The video signal restores itself after about 3-4 seconds. I have already tried updating the ThinkPad's BIOS to the latest version, updating Intel graphics drivers to latest version, as well as the Pro Dock 90w firmware (to version 2.33.000).  I also swapped out my DisplayPort 1.1 cable for a DisplayPort 1.2 cable. The monitor+speakers work beautifully when connected to a Dell laptop+docking station, so I know the problem is not with the monitor. Are there any other tricks I could try? 

Read other answers
RELEVANCY SCORE 72

I currently own a Thinkpad Helix, bought about two months ago. Up until now it has been well worth the price, and worked almost flawlessly. Just this morning, out of nowhere the keyboard and touchpad stopped working. I tried my usual solution, detaching and reattaching the dock, but it did nothing. I tried restarting my computer, and found that while it was plugged into the dock, I got a "Keyboard Dock Fan Error" and it would fail to start. I started looking around on these forums for answers, and it seems many people had the same problem I did. On one thread there seemed to be a link to this firmware update designed specifically to get rid of the problem I had. Upon installing it and running the application, it would freeze for about 5 seconds and then display this strange error message, "This tool and EC firmware mismatch, or communication error is happened." I can assure you I was connected to the internet at the time. So i looked at the readme, and it suggested updating the bios. When I tried that, it told me I already had the latest bios installed, and running the firmware update again afterwards gave the samw results. I don't know what to do, and i'd love some help on the matter.

A:Enhanced Keyboard Dock Firmware Update Problem

Can you verify what bios and keyboard firmware you have installed now? 
The latest bios is version 1.14. 
 
You can check this by rebooting and hitting F1. The versions should be listed. The keyboard firmware is listed as MPU I belive. Then just hit F10 to close it once you're done.

Read other 9 answers
RELEVANCY SCORE 67.6

I'm unable o update the TPM firmware in an X1 Tablet (model type 20GG003UUK). The firmware update utility reports:TPM manufacturer: InfinionFirmware Version: 6.40Spec Version: 1.2 When I perform the update it says it is updating to 6.43. It appears to work, in that it says it is doing the flash, the tablet reboots, but afterwards, when I run the utility again, it remains on 6.40. Here's the log from the update... [2018/7/12 16:26:51] TpmUpdt.exe version 1.0.0.0OS = Windows 10 64bitChecking TPM status.TpmFwChk TpmStatus: 1TPM Manufacturer: InfineonCurrent TPM Firmware Version: 6.40New Firmware Version: 6.43AC adapter/Battery check....OK.TPM FW Flashing....TPM FW Flash completed. I'm running this from an admin account using 'run as administrator' on Windows 10 Pro 1803. I'm doing this because of the advisory here:https://support.lenovo.com/gb/en/product_security/len-15552 Can someone assist with getting this updated? 

Read other answers
RELEVANCY SCORE 67.6

Hello everybody, I know another thread with similar problems here, booting three times ect .... but not with the new specific problem, this one seems to be new to me and I hope for a solution without the technician having to change the Hardware Motherboard. I had the original ME firmware and now an update was made by Lenovo Vantage, but this unfortunately did not work properly and led to the following: 1. at boot the "Strg P" entry has disappeared 2. in the Bios the entry with ME Firmware Version is empty 3. ME is shown as deactivated or not present in Hardware Manager, The result is that you can no longer perform flash if ME is no longer present in the system. 4. When restarting or reactivating, it will take about 35 seconds for the Lenovo logo to be displayed and the system will start up  this is all very frustrating, i hope that there will be a software solution, or maybe someone knows a solution .... Thanks all for support.....

Read other answers
RELEVANCY SCORE 67.2

This is an excellent Lap Top. Cannot update Firmware. Levovo Service Bridge downloaded but does not seem to work. Can anyone help? Thank you. Best regards. Peter

Read other answers
RELEVANCY SCORE 67.2

Hello there,I am unable to update the SSD firmware of my X1 Carbon 2nd Gen. I am running Windows 10 1709 Enterprise.SSD is a Samsung MZNTE512HMJH-000L1, current firmware version EXT26L0Q.Installed Intel Rapid Storage Technology driver version: 14.8.16.1063 (newest available for this laptop model) The following error pops up: Logged in as local administrator, tried to disable BitLocker encryption etc... to no avail. Would be happy about any help or suggestions! 

Read other answers
RELEVANCY SCORE 67.2

I bought 2 batteries original Lenovo 4.4Ah for the tablet on ebay. The battery was sell as new.When I try to charge it just blink ornage and no charge. The seller refuse to take back the battery telling the price was low take as it is. He said all other batteries he sell where ok however this was the last one they sell and they where few years old. Then I did open the battery case and mesure the voltage all batteries was zero. I decide to charge evey single cell wit USB charger and a resistor. I was able to charge all the cell to 3.5-3.6V with a total voltage of 14V. However the pin of the battery show 0V. After reading on web I find out that the firmware is in Ram and consume some power. The for such long period of time drain the battery to 0V, very good design.... to sell battery. With no more power since it is ram the firmware is gone.In any case, I am afraid to buy new battery to get same problem since it is old computer. I have found that there is a lenovo utility for firmware utility but my computer is not in the list. Can I try or there is another solution. Only solution out of firmware update is buy a used working battery and replace with the one I have taking care to keep power during replacement (this is quite touchy). I thought may be to use a similar battery as Thinkpad X61 and just change the case. Maybe there is another third part solution. I hope this information and my experience could be also helpfull to remember others to charge your battery once in a while ... Read more

Read other answers
RELEVANCY SCORE 67.2

I bought 2 batteries original Lenovo 4.4Ah for the tablet on ebay. The battery was sell as new.When I try to charge it just blink ornage and no charge. The seller refuse to take back the battery telling the price was low take as it is. He said all other batteries he sell where ok however this was the last one they sell and they where few years old. Then I did open the battery case and mesure the voltage all batteries was zero. I decide to charge evey single cell wit USB charger and a resistor. I was able to charge all the cell to 3.5-3.6V with a total voltage of 14V. However the pin of the battery show 0V. After reading on web I find out that the firmware is in Ram and consume some power. The for such long period of time drain the battery to 0V, very good design.... to sell battery. With no more power since it is ram the firmware is gone.In any case, I am afraid to buy new battery to get same problem since it is old computer. I have found that there is a lenovo utility for firmware utility but my computer is not in the list. Can I try or there is another solution. Only solution out of firmware update is buy a used working battery and replace with the one I have taking care to keep power during replacement (this is quite touchy). I thought may be to use a similar battery as Thinkpad X61 and just change the case. Maybe there is another third part solution. I hope this information and my experience could be also helpfull to remember others to charge your battery once in a while ... Read more

Read other answers