Over 1 million tech questions and answers.

Struggling with some technical error with your F- secure ant

Q: Struggling with some technical error with your F- secure ant

F ? secure provides you with best cyber security products and is known for being an ace at virus, malware, spyware scanning present in the system already and is also known for fast removal of all such unwanted elements thus helping in smooth and efficient running of the systems, it also is found efficient at keeping the system safe from all kinds of viral attacks, but still the user at times finds it difficult to get through some technical error that pops up at F ? secure it often makes the windows slow or at times installation or reinstallation becomes a problem in any such situation for an efficient and smooth professional running one needs to contact F-secure support system number immediately where they will get the best and most accurate technical advice by well trained and well experienced F-secure technicians. For more info visit:
http://antivirusphonenumber.co.uk/f-secure.html

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Struggling with some technical error with your F- secure ant

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 51.2

Hi all, first post here!

I have recently bought a new quad PC and installed Vista Ultimate x64 on it. It installed fine, I activated it and started to get the updates through, after a few hours they were all installed successfully.

However, last night the Vista SP1 update appeared and I am a bit stuck! It says it is downloading but just stays on 0% for HOURS! Then, all of a sudden last night it climbled to 94%, stopped and I got an error from Windows saying the update has stopped working. I ran it again over night and got up this morning and it looked like it had finally downloaded as it was in the install process, asking me to press Next etc. I left it running but when I returned it said it had failed.

Now when I try to run it again, it seems to be stuck on 0% again. I have tried turning the firewall off but nothing happens.

Any ideas? Can it be downloaded manually and installed from somewhere else? Has anyone else had this problem?

Cheers
Tim

A:No Error but struggling to install SP1

Hello Geordie,

Welcome to the forum

Have a look here;
Download details: Windows Vista Service Pack 1 Five Language Standalone for x64-based Systems (KB936330)

Make sure that you have all the latest drivers and Bios before installing.

I hope this helps.

Pooch

Read other 2 answers
RELEVANCY SCORE 50.4

System:

Microsoft Windows XP
Home Edition
Version 2002
Service Pack 2

Hewlett-Packard
Pavilion
AMD Athlon(tm) XP 2200+
1.80 GHz, 1.00 GB of RAM

Along with the BSOD, I Get the IRQL_NOT_LESS_OR_EQUAL.

It usually goes off to blue screen in the middle of playing a fps game or when a lot of activity is going on my computer, but most of the time it seems it is random.

I'm going to add minidump files that you would be so kind enough to analyze and give me a
diagnostic of what my problem is and how i could fix the problem.
 

A:BSOD Error struggling ALOT

Read other 7 answers
RELEVANCY SCORE 50.4

System:

Microsoft Windows XP
Home Edition
Version 2002
Service Pack 2

Hewlett-Packard
Pavilion
AMD Athlon(tm) XP 2200+
1.80 GHz, 1.00 GB of RAM

Along with the BSOD, I Get the IRQL_NOT_LESS_OR_EQUAL.

It usually goes off to blue screen in the middle of playing a fps game or when a lot of activity is going on my computer, but most of the time it seems it is random.

I'm going to add minidump files that you would be so kind enough to analyze and give me a
diagnostic of what my problem is and how i could fix the problem.

A:BSOD Error struggling ALOT

All the crashes are the same, and look to be sound related. See if updating the sound drivers has any effect. File info.

Read other 4 answers
RELEVANCY SCORE 49.6

Hello everyone,

I have a Toshiba Satellie P750 (less than a year old) running Windows 7 Home Premium.

I've been struggling to fix my computer for 3 days and have no idea what caused the problem.

Here is the most recent issue:

My computer (finally) gave me the Repair Computer option after pressing F8 (presumably from my DVD-RW).

1. Startup Repair found no problems.
2. Computer still says it contains no restore points.
3. Ran the memory check--no issues found. However, after it was done and I logged in, it came up with a blue screen and a new error code:

STOP: c0000135 The program can't start because %hs is missing from your computer. Try reinstalling the program to fix this problem.

I was just trying to restore my computer from my WD Passport, but it doesn't show up as an option when I plug it into the USB port to find a system image from an external drive.

(My Passport did back up a ton of data--I don't have enough know-how to understand if I can use it to restore in this way.)

Please advise me how to proceed! I really appreciate the help.

Lauren

---------------------------------------------------------------------

Day 2:

Previous Issues, Attempted Solutions, and Important Info:

Windows 7 would not start/run normally. I'm not sure how to repair / restore it or which one I should do.

1. Windows 7 will permit me to login normally. However, after login, I can only see a blank, black screen with a normal-size cursor. No task bar, no de... Read more

A:Windows 7 Error--STOP: c0000135--Struggling for 3 days, help please!

run the dos diagnostic tool on the hard drive

http://storage.toshiba.com/storage-services-support/warranty-support/software-utilities
 

Read other 1 answers
RELEVANCY SCORE 47.2

Well, I downloaded HJT on another computer, burned it, and uploaded it to a NEW folder on my desktop on my problem computer and, quite frankly, it goofed. HJT encounters an error when it is scanning NT services and has to exit. Man, I'm really beginning to hate this computer....

A:Technical Error In HJT

Some computers have this problem, try using an older version:

Please download HijackThis - this program will help us determine if there are any spyware/malware on your computer. Create a folder at C:\HJT and move HijackThis1982.exe there. Run a scan and save the log file. Get HijackThis Analyzer and save it to the same folder as the hijackthis.log file. Run HijackThis Analyzer and type in y if you agree. Open up the result.txt file created. Copy the whole result.txt log and post it in the forum. Do not fix anything in HijackThis since they may be harmless.

Read other 2 answers
RELEVANCY SCORE 46.8

Whenever I log in to my windows XP, a minute after logging in a blue screen appears, saying, "A problem has been detected and windows has been shut down to prevent damage to your computer". After this, it suggests several things to try and then it displays this technical error:

*** STOP: 0x0000008e (0xc0000005, 0x805787f8, 0xba11b99c, 0x00000000)

Below this it states it's "dumping physical memory to disk".
After a period of time it just shuts down and restarts. I've tried uninstalling my inernet security as I believe it involves the RAM in the computer (we have 1.5 GB) but that only worked for the day. What is going on with my computer?
 

A:Confusing technical error

You could check the Minidump file in your Windows folder to see if that points to the cause of the problem. If you are unsure about what to look for, you could upload it here.
 

Read other 1 answers
RELEVANCY SCORE 46.8

Dear Guyz,
this is my story, I have an Acer Aspire Z1620 AIO Desktop. It was working well on win8. However, yesterday while my desktop was on, electricity went out. I'm in India so it was all usual and generator started. So my DESKTOP ALSO STARTED at the same time. But what happened that after windows logo the screen got blurred and it restarted over again and again. I thought it would be simple so I thought to upgrade it to win8.1 . So I made a bootable pen drive and when I tried to install it. It says win8.1 can't be installed on MBR disk. It can be done only on GPT Disk. So, I tried to gather info. About MBR AND GPT but then in vain I found out that first I need to clean hard disk. So I formatted C: drive During installation. But the problem remains. It was asking to convert it into GPT ( Somehow with searching I found how to convert MBR into GPT using Diskpart). While I was using Diskpart it shows my C: Harddisk and D: Harddisk as one whole partition(900GB IN ONE WHOLE UNIT). Now I can't erase my D: Harddisk. I have got very very very important files. It is the source. Moreover, I found that throught GPTGEN it's possible. However, My command prompt is saying that the path cannot be specified (how could it when I already formatted my C: drive). By imparting more on net I found that by disabling UEFI mode into Legacy mode the computer will automatically take MBR drive. But when I opened BIOS Setup I can't find my UEFI Secure boot option. Also when I tried installing Ubu... Read more

Read other answers
RELEVANCY SCORE 46.4

Hi, I'm wondering what is wrong with my computer.

When I play a game ( World of Warcraft ) or few others, I get a message or something thats on my monitor that says
"Out of Range" Set monitor resolution lower or read the manual guide.

When I'm in the game it works fine, but then it all freezes and I got that message and it kept happening a few other times
maybe after 30 mins of playing or so.

I'm wondering why I get this message and the specs are below if needed.

Specs:

Computer - Compaq Presario 5108 US or 5000 series

Motherboard - Via

Processor - AMD Athlon 1.2 GHz

Memory - 384 RAM

Graphics Card - Radeon X1300/X1550 series
If you need anything else listed please tell me.

Thanks.
 

A:Technical Error with Graphics Card

You max out the video display of both your video card or the monitor. You would have to use a lower setting. Don't max the settings otherwise you'll get this error..
 

Read other 4 answers
RELEVANCY SCORE 40

This is a strange one. I have two users accounts. #1 is an administrator
account, password protected, that I use when necessary and I also want to
keep others out of it. #2 is a standard account for all our general
purposes. I was trying to remove the standard user from having permission to
access the "Documents" folder under #1 and was trying to uncheck the
"Include inheritable permissions. . ." box when error warnings came up. I'm
sorry I can't repeat them verbatim, I'm afraid to try it again. There were
three and each said "there was an error because of. . . one said "My
Pictures," the next "My Videos" and the last one said "My Music." Yes, all
folders from an XP system. I do not have nor have I ever had these folders
under this folder. I do not know where this information is coming from. So
after I cancel these errors, then I find that the folder is now "Shared"
with the other user account.???
--

Windows Vista Home Premium 64-BIT SP1
Intel Core 2 Duo CPU T5550 @ 1.83GHz
4.00 GB RAM
300 GB HDD

A:Error trying to secure a folder

Originally Posted by Whatrymes


one said "My
Pictures," the next "My Videos" and the last one said "My Music." Yes, all
folders from an XP system. I do not have nor have I ever had these folders
under this folder.



They are not folders, just junction links unless you change the location of the Documents folder.

Read other 9 answers
RELEVANCY SCORE 40

I have started getting the C:\$Secure message, and can't access my add or remove programs, I have also lost all of my restore points, and am also getting a message that is
ENT.exe-Bad Image. Any Help is appreciated. I am including my hijack this log.
DSAGLogfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:52:31 PM, on 8/25/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exe
C:\WINDOWS\System32\drivers\CDAC11BA.EXE
C:\WINDOWS\system32\nvsvc32.exe
C:\Program Files\Retrospect\Retrospect 7.5\retrorun.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Logitech\iTouch\iTouch.exe
C:\WINDOWS\System32\DSentry.exe
C:\Program Files\Java\jre1.6.0_01\bin\jusched.exe
C:\Program Files\MouseWare\system\em_exec.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\Program Files\Microsoft ActiveSync\WCESCOMM.EXE
C:\Program Files\DellSupport\DSAgnt.exe
C:\Program Files\Digital Line Detect\DLG.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Documents and Se... Read more

A:C:\$secure error message

Read other 16 answers
RELEVANCY SCORE 39.6

I am trying to make an secure POP3 (port 995) and secure IMAP (port 993) connection thru Verizon FIOS via the ActionTec MI424WR modem/router/802.11G box that Verizon supplied. I am running Vista, and I am using Outlook 2007, which is set to these ports.

I wanted to do this with the firewall set to the "Maximum Security (High)" setting.

These ports were not available in the ActionTec's pick list so I added these ports (using the "Advanced" tab and then under "Protocols") so they read "TCP any -> 993" and "TCP any -> 995"

I tried adding these ports to the "Access Control" table, and the "Port Forwarding" table and the "Advanced Filtering" table but none worked.

The Verizon Tech Support line worker told me the only solution was to enable the DMZ host and set it to be the IP address of the computer I happened to be on.

To my astonisment, with DMZ enabled, the "Access Control" rules seemed to kick in for the DMZ host and my secure POP3 would only work if I had this port allowed in the "Access Control" table.

Questions:
1. Is it safe to run with DMZ pointing to my computer.

I thought this effectively brought the "DMZ host" (i.e. my computer) outsied the firewall and exposed all the ports on my computer directly to the internet. (But if that were the case, then

2. why does the Access Control table work only to the DMZ host???

3. How do I make the "Ac... Read more

A:ActionTec MI424WR Verizon FIOS & Secure IMAP & Secure POP3

DMZ does indeed expose the computer directly to the outside world, that's why it's called the DMZ!

Do you have residential or commercial FiOS? There are blocked ports for the residential service.
 

Read other 3 answers
RELEVANCY SCORE 39.6

F-Secure Client Security 11.61 Build 104

F-Secure Client Security is a centrally managed, complete security solution for businesses, provides an intelligent way to protect corporate workstations and laptops against traditional and new zero-hour threats.

In 60 seconds from the first confirmation of a new threat, all the computers in your corporate network are protected.

Whether your company is large or small, Client Security scales up with your business.

Download F-Secure Client Security Trial:
https://download.f-secure.com/corpro/cs/current/fscs-11.61.104-rtm.jar

Download F-Secure Client Security Premium Trial:
https://download.f-secure.com/corpro/cs/current/fscspr-11.61.104-rtm.jar

Download F-Secure Automatic Update Agent 8.36 Hotfix 1:
https://download.f-secure.com/corpro/avwks/current/fsaua836-hf01-signed.fsfix

What?s new in F-Secure Client Security 11.61:
New features and improvements: Sidegrade module ? It is now possible to remove a conflicting product, which has been installed via Windows Installer as an MSI package, during the installation of Client Security or Anti-virus for Workstations.
Fixed issues: A path traversal vulnerability was discovered internally in F-Secure?s Automatic Update Agent (AUA), which could potentially allow a remote attacker to replace system files.

F-Secure Antivirus for Workstations 11.61

F-Secure Anti-Virus for Workstations is a powerful antivirus, antispyware and antirootkit (BlackLight) solution for corporate environments ... Read more

Read other answers
RELEVANCY SCORE 39.6

Hi,

I'v install secure copy 3.8 on seven, when i run and validate a licence test, i'v a error message
"The following error was encountered while attempting to load the licence file :"
"le fichier sp?cifi? est introuvable. [2]"

I'v trying fo find error with dbg, depends, procmon but id'ont find , so i trying with ACT (application compatibility toolkit) i'v crashing on NTDLL.DLL.

i'v not a specialist on dev.

anyone can help me

This application work perfectly with VISTA SP2

A:Secure copy 3.8 error and crashing

I don't think I'd run a "registry fixer" but this article seems to explain that it's a problem with how the program was installed.

Exe Crash Ntdll Dll Error - How to Repair these Errors !

Maybe try uninstalling and reinstalling in Vista SP2 compatibility mode?

If that doesn't work, a repair install should do the trick, but I'd still uninstall the program and reinstall in compatibility mode.

Repair Install

Read other 2 answers
RELEVANCY SCORE 39.2

Let me start by saying that lately my bank website, Norton Safesearch and even your website appear to have replaced their secure certificates with outdated or insufficient security. Usually in these cases the https in the address bar is crossed out or has a yellow          ! triangle. If you click on that triangle or crossed out space you will see a grey box that says "your connection to this site is not private". My connection is a private home network as opposed to public. It used to say "you have not visited this site before today" but that phrase is no longer there. Of course I've gone to these sites before. In the grey box there is a tab titled 'connections'. Click on that and it says '! The identity of this website has not been verified' and '! Your connection to www.xxxxxxx.com is not encrypted'. These sites normally have the green bar in the address bar indicating a secure connection. Clicking on the green bar will give you the same grey box, only this time it says "Your connection to this site is private" and it will tell you 'the identity of this site has been verified by [name of certificate]. Valid Certificate Transparency supplied by the server'. It will say 'your connection is encrypted using an obsolete cipher suite, or [...encrypted using a modern cipher suite]. Both are followed by specific connection and encryption information, i.e. TLS 1.2.
 
Now let me get to the brass tacks. I have been to bleepingcomputer.com at least 3 time... Read more

A:previously secure (https) websites no longer secure

how are you mrb5162 i have readed you history and symptoms i am not such a good one but if you want it then maybe i can help you
do you really having those symptoms about 2years? i guess it is very painful for everyone 
first i want to know about few points
 
1. which windows version/bits/patch number do you use at this time
 
2. which browser name/version do you using at that you having problems
 
3. do you have ever formatted system and reinstalled windows at once?
 
4. if you have formatted system and then same problem persisting after reinstall windows?

Read other 13 answers
RELEVANCY SCORE 39.2

Hi! I don't know if this is specifically a Vista problem or not, so I am posting here.

Here is where I am at:

I am trying to get my XBox to share my laptop's internet connection. I know that this is possible because I have done it before, from this very laptop, with this very Vista os on it. Now, I am unable to checkmark "Allow other users..." for sharing etc. I get the error that Internet Connection Sharing failed because "the dependency service or group failed to start."

Well I found out that it was dependent on the service "Remote Access Auto Connection Manager", so I tried to start that. (It is also dependent on Telephony, but that is running). Same error. I find out that THAT is dependent on "Remote Access Connection Manager". When I try to start THAT, I get the same error. It is dependent on "Secure Socket Tunneling Protocol Service", which is not dependent on anything. When I try to get THAT service to start, I always get the error 1717: Interface is unknown.

I have been trying for 3 days to fix this. I am ready to throw Vista out of the Window & reinstall XP, seriously. The only suggested solution I have found so far is to do a clean start-up. I have done this, & am still not able to get these certain services running. These are my last-ditch efforts, & then Vista is gone for good for me. I have done wayyyy too much troubleshooting on this os. I have been searching & searching & there... Read more

A:Secure Socket Tunneling Error 1717

Read other 8 answers
RELEVANCY SCORE 39.2

Ok, I am about to throw my computer out the window. At first I coud not connect to any secure sites so I figured it was the NIS 2004 firewall. I was receiving internal error messages from the program. I deleted this and the problem was still not fixed. Now I have downloaded mozilla and attempted to reinstall NIS 2004. The NIS now says "error communicating with server, please ensure you have an active internet connection." What does this mean? Mozilla will not open either, citing connection problems as well. I still cannot access any secure sites. Does anyone have any insight into this problem? I would greatly appreciate it.
 

A:Error communicating with server and secure sites

Read other 7 answers
RELEVANCY SCORE 39.2

Good Morning,

I receive the following error message on every boot up of my Toshiba Laptop, running Windows 7, 64 bit OS.

F - Secure Host Process is trying to recover your information.

The message disappears after a few seconds and does not recur until the next boot up.

I assume that F refers to a USB device, but I never boot up with a USB device installed and I have always used the 'safe removal' process.

The error message seems to be of little significance but its persistent occurrence is very frustrating.

Any suggestion to solve this annoyance would be gratefully received.

jcbhydro

A:Secure Host Process Error Message

Just for grins after shutting down try holding down the power button so that the machine shuts down completely. Wait about 30 seconds. Then boot up. It may not work. But it shouldn't hurt to try.

Read other 4 answers
RELEVANCY SCORE 39.2

I uninstalled and reinstalled Firefox as it was running slowly. I got the "connection not secure error" for Google and Yahoo search and some other websites. Others worked fine. Other browsers worked fine.

I tried the various things recommended on Google but nothing worked. I restored Firefox from a Shadowprotect backup and it works fine.

I suppose this question is academic since Firefox is working, but any ideas why there was that error after installation?

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Pro, 64 bit
Processor: AMD A10-6700 APU with Radeon(tm) HD Graphics, AMD64 Family 21 Model 19 Stepping 1
Processor Count: 4
RAM: 16328 Mb
Graphics Card: NVIDIA GeForce GTX 1060 6GB, -1 Mb
Hard Drives: C: 1279 GB (1081 GB Free); D: 199 GB (193 GB Free); E: 199 GB (187 GB Free); F: 199 GB (187 GB Free); G: 1023 GB (953 GB Free); H: 499 GB (462 GB Free); I: 1638 GB (1522 GB Free); J: 546 GB (475 GB Free);
Motherboard: ASUSTeK COMPUTER INC., M11BB
Antivirus: Webroot SecureAnywhere, Enabled and Updated
 

Read other answers
RELEVANCY SCORE 39.2

Hi-

I have a Sony Vaio running Windows 7 and whenever I try to open a video I get this popup that OpenMG Secure Module is trying to install itself, if you click OK an error comes up that the network destination cannot be found error 1706, same thing if you click cancel.

The OpenMG program doesn't exist in my program list, and I googled some stuff that says Sonic Stage has something to do with it and I don't have that on my computer either.

Does anyone know what to do about this? Quite annoying.

Read other answers
RELEVANCY SCORE 39.2

I get the following error message every time i tried to access a secure site:

The page cannot be displayed
The page you are looking for is currently unavailable. The Web site might be experiencing technical difficulties, or you may need to adjust your browser settings.
To attempt fixing network connectivity problems, click Tools, and then click "Diagnose Connection Problems..."


Other options to try:

Click the Refresh button, or try again later.

If you typed the page address in the Address bar, make sure that it is spelled correctly.

To check your connection settings, click the Tools menu, and then click Internet Options. On the Connections tab, click Settings. The settings should match those provided by your local area network (LAN) administrator or Internet service provider (ISP).
See if your Internet connection settings are being detected. You can set Microsoft Windows to examine your network and automatically discover network connection settings (if your network administrator has enabled this setting).
Click the Tools menu, and then click Internet Options.
On the Connections tab, click LAN Settings.
Select Automatically detect settings, and then click OK.
Some sites require 128-bit connection security. Click the Help menu and then click About Internet Explorer to determine what strength security you have installed.
If you are trying to reach a secure site, make sure your Security settings can support it. Click the Tools menu, a... Read more

Read other answers
RELEVANCY SCORE 39.2

Hi Guys,
I got this 3F0 Error and i am 100% Sure that my HDD is in good shape.
I formated yesterday,
i try to enable UEFi [Disables Legacy Boot] and the 3F0 Error Pops out.
If i switch back to Legacy Boot [Disables UEFI and Secure Boot] then the PC starts notmally
Can you guys help me?
Pavillion HP 14 e019tx
8670M 2Gb Gddr3
3230m , ore i5

A:3F0 Error while enabling UEFi and Secure boot

Your UEFI/BIOS firmware needs to be set to UEFI before installing Windows 8/8.1.

To clean install:
1) Clean the HD Drive, using Step one in this tutorial:
SSD / HDD : Optimize for Windows Reinstallation - Windows 7 Help Forums
than
2a) Clean install with the OEM manufacturer's Recovery Disk.

2b) Clean Install - Windows 8

2c) UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with

Read other 3 answers
RELEVANCY SCORE 39.2

I simply don't know where to ask about this. Mozilla message logins and even their answers don't work well.

Two things.

A message appears that says Computer Not Secure even for google
and asks thent o send a message with a button. It still hangs on the next attempt

I ran Mozbackup to save my settings in preparation to reinstall a newer Firefox.

In do this the process of saving things took longer than usual.
I was able to pick out something called telemetry pings being saved as part of the backup
process. What are telemetry pings and are these some form of malware?

Malwarebyes could not be run either since it goes to look for updates.

I have not tried Hijack this yet, but I think I'll run into the same thing.

The whole text of the error message is:

----------------------------------------------------------------------------------------
"Your connection is not secure

The owner of Google has configured their website improperly. To protect your information from being stolen, Firefox has not connected to this website.

This site uses HTTP Strict Transport Security (HSTS) to specify that Firefox only connect to it securely. As a result, it is not possible to add an exception for this certificate.

Learn more?

Report errors like this to help Mozilla identify misconfigured sites"

-----------------------------------------------------------------------------------------

It has to be bogus. I am dealing with another problem and using a backup disk
so whateve... Read more

Read other answers
RELEVANCY SCORE 39.2

Ok, I am about to throw my computer out the window. At first I coud not connect to any secure sites so I figured it was the NIS 2004 firewall. I was receiving internal error messages from the program. I deleted this and the problem was still not fixed. Now I have downloaded mozilla and attempted to reinstall NIS 2004. The NIS now says "error communicating with server, please ensure you have an active internet connection." What does this mean? Mozilla will not open either, citing connection problems as well. I still cannot access any secure sites. Does anyone have any insight into this problem? I would greatly appreciate it.

A:Error Communicating with Server and Secure Sites

I suggest fooling around with your firewall's port settings. It sounds like the firewall has these ports closed, the very ones required to communicate with remote servers.

I am not fresh on the exact ports that secure webservers or clients use, however I am sure that a little googling will provide an answer. Better yet, perhaps another more learned member will happily provide that information shortly.


Good Luck!

Read other 1 answers
RELEVANCY SCORE 39.2

I have a SandiskSecureAccess flash drive, have been using it for about a year, plugged into my ASUS N550J with Windows 8.1. Last time I tried to open the vault I got this error message: "Invalid class name in archive".
It seems to partially open to show the different folders and drives but the vaulted part, shown with a vault icon, does not open. When I double click on that icon I get another error message: This vault could not be loaded, it may be located on another computer or the original file has been manually removed." Everything looks exactly as it always has and the folder sizes seem to indicate that nothing has been removed. It worked fine yesterday and I did not intentionally remove or delete anything.
 

Read other answers
RELEVANCY SCORE 38.8

The fan on the Power Supply keeps going on and off. It spins for about 1 second then turns off then turns on. Sometimes the fan spins for more than 1 second and it makes a weird squeaky noise. I haven't cleaned my PC properly in months... I used a hair dryer to blow away the dust but problem is still occurring. Should I open up the PSU and clean it further... or is it time for a new PSU?
 

A:PSU fan struggling

A ahir dryer probably would not provide the appropriate air pressure to do a good job, I suggest trying to clean it with a can of compressed air. These can be picked up for about $3 at walmart, kMart, just about any store that sells electronics. Alswo a cleaning about every two weeks would be a better scheme. I take 5 computers out to my work shop at least every two weeks for a good dust removal. But then I have a small compressor with an air nozzle and turn the pressure down to about 20 PSI.
 

Read other 3 answers
RELEVANCY SCORE 38.8

Hi Guys,

I seem to have been hit witth something, can anyone please assist, it would be much appreciated.

Regards,

Wilsy.
******************

Logfile of HijackThis v1.99.0
Scan saved at 19:39:51, on 25/01/2005
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\SYSTEM32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\atievxx.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Belkin\Belkin Wireless Network Utility\WLService.exe
C:\Program Files\Belkin\Belkin Wireless Network Utility\WLanCfgG.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\Program Files\MSN Messenger\msnmsgr.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Documents and Settings\Cotton Eyed Joe\My Documents\My Files\ADAware\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = res://C:\WINDOWS\cqdls.dll/sp.html#28129
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = res://C:\WINDOWS\cqdls.dll/sp.html#28129
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = about:blank
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = res://C:\WINDOWS\cqdls... Read more

A:Really struggling here, please help?

Remove all these, delete associated files

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = res://C:\WINDOWS\cqdls.dll/sp.html#28129
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = res://C:\WINDOWS\cqdls.dll/sp.html#28129
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = about:blank
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = res://C:\WINDOWS\cqdls.dll/sp.html#28129
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Bar = res://C:\WINDOWS\cqdls.dll/sp.html#28129
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = res://C:\WINDOWS\cqdls.dll/sp.html#28129
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = res://C:\WINDOWS\cqdls.dll/sp.html#28129
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Local Page =
R3 - Default URLSearchHook is missing
O2 - BHO: (no name) - {61A1BD6A-1454-4FC8-F175-3EDD86B070CF} - C:\WINDOWS\atllp32.dll
O4 - HKLM\..\Run: [1C1.tmp] C:\DOCUME~1\COTTON~1\LOCALS~1\Temp\1C1.tmp.exe 1 28129
O15 - Trusted Zone: *.frame.crazywinnings.com
 

Read other 2 answers
RELEVANCY SCORE 38.8

I am not sure whether I chose the right forum for this topic, as it's not only one game but morelike all processes are affected. When I am playing any game with like, say, 90 fps, it certainly does not feel like 90 fps like it used to feel before the problem. It feels lots of less, choppy, slow and especially when I use mouse to turn and to look around. This same problem comes with not only this game, but other programs and games aswell. Just a simple task like watching a movie from my computer, usually when the camera moves, it feels like the pc is giving some kind of lag. I must say, I did re-install my windows when I noticed the problem but there was no significant change.... So I deduce it must be a hardware problem. I hope you understand something from my explanation

Oh. And I check the temperature on graphics card. It seems to be ok, around 60 degrees? So it could not be due to overheating I guess.

Could it be that the card is broken? May the monitor be faulty? If, how can I get this confirmed?

For the reference my specs are

Intel Core 2 DUO CPU E8500 @ 3.16 Ghz P5Q Deluxe
RAM 4 GB
ATI RADEON HD 4800-series
Windows 7 32-bit

I am very frustrated by the situation, and any help would be highly appreciated
I've once taken my pc for repair but they couldn't fix it.
 

Read other answers
RELEVANCY SCORE 38.8

Hi, names Zero, new to the forums. but figured it would be a good place for me. anyways onto my problem.

I've been having this issue for about a week now. My audio cuts in and out while streaming on youtube. or other streaming sites, yet on my computer i can listen to music/vids for hours and it wont skip. within a 3 minute vid on youtube or such the audio will cut out for 1-4 seconds. every minute or so. And I know it doesnt have anything to do with my net speed. im on a 10 meg cable connection. and even with the video fully loaded it will do it. I'm no.. novice around computers. but this is one issue that I cant seem to solve on my own.

List of things tried.
Updating audio drivers.
Uninstalling audio drivers. reinstalling, trying without updating first, then reupdating
Updating adobe flash player.
Uninstalling/trying without adobe flash player (Shocked it let me play videos without adobe flash >.>)
Installing older version of adobe flash player.

Tried on both Firefox and Internet explorer. same results with the cutting of audio. so dont think its as simple as bad version of explorers. running latest version of FF. old version of IE. tried on a fresh install of google chrome.

My computer specs.
Windows Xp media edition Service pack 3
Nvidia geforce 9600 gt graphs card.
dual core 2 proc.
3 gigs of ram (Initially four but windows xp wont recognize more then 3)

Soo can anyone help me out here?


Edit: P.s It wont cut out sounds/video over skype ... Read more

A:Help please. struggling!

after further testing. it seems to be mainly two sites..

Youtube.
PutLocker

Read other 3 answers
RELEVANCY SCORE 38.8

When I boot up I am getting a window with the message ' There is a problem starting C:\Program Files (x86)\Conduit\CT3309350\plugins\TBVerifier.dll How can I stop this happening?
 

A:Struggling

Run the following and use Clean up button, does issue stop?

Download AdwCleaner by Xplode from here: http://www.bleepingcomputer.com/download/adwcleaner/ and save to your Desktop.
Double click on AdwCleaner.exe to run the tool.
Vista/Windows 7/8 users right-click and select Run As Administrator
Click on the Scan button.
AdwCleaner will begin...be patient as the scan may take some time to complete.
When it's done you'll see: Pending: Uncheck any elements you don't want removed.
Now click on the Report button...a logfile (AdwCleaner[R0].txt) will open in Notepad for review.
Look over the log especially under Files/Folders for any program you want to save.
If there's a program you want to save, just uncheck it from AdwCleaner.
If you're not sure, post the log for review.
If you're ready to clean it all up.....click the Clean button.
After rebooting, a logfile report (AdwCleaner[S0].txt) will open automatically.
Copy and paste the contents of that logfile in your next reply.
A copy of that logfile will also be saved in the C:\AdwCleaner folder.
Items that are deleted are moved to the Quarantine Folder: C:\AdwCleaner\Quarantine
To restore an item that has been deleted (if necessary):
Go to Tools > Quarantine Manager > check what you want restored > now click on Restore.

Kevin
 

Read other 3 answers
RELEVANCY SCORE 38.8

The issue seems to be primary with Google. I have tried Chrome, Mozilla & Internet Explorer - all new and updated. Chrome & IE are 100% factory, no addons at all. Google is either not loading or only partially loading. Meaning only some of the graphics load. Gplus just goes wacky :P

These errors are primarily associated with Google. It seems to be "security" related? I have some things in my event viewer I do not understand under security. Though nothing looks horrible. For the last 2-4 days google & its services (Youtube, G+ and others) have been acting funky. I did general maleware scans - Several (nothing bad all removed). Is it a virus/hack? Did I do something wrong? Thoughts? On occasion other websites give me issues.
Secure Connection Failed
Timed out (Not as frequent)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
The webpage at https://plus.google.com/u/0/me?tab=wX might be temporarily down or it may have moved permanently to a new web address. GOOGLE absolutely was not down
I have received some type of TLS errors?

When trying to log into yahoo messenger I receive:
yahoo messenger gives this error: Any use of this Certificate constitutes acceptance of the DigiCert CP/CPS and the Relying Party Agreement which limit liability and are incorporated herein by reference. It wants me to add a new cert

TY IN ADVANCE!
-Darpa

This is a common error below pic attached... Read more

Read other answers
RELEVANCY SCORE 38.8

Issue with ESET possibly with just Firefox
 
Issues:
"Secure Connection Failed"
An error occurred during a connection to www.zearn.org. Peer’s certificate has an invalid signature. Error code: SEC_ERROR_BAD_SIGNATURE
    The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Please contact the website owners to inform them of this problem.
Page won't load
if page loads, it might or might not fully work
If page loads, all white with some titles & misc displaced writing
Page might load completely blank
Tried to fix by:
Uninstalling & reinstalling Firefox per directions of troubleshooting Help guide
Uninstalling & re-installing ad-block plus & super script or turning off
Per help guide I changed selection for ESET SSL
I contacted ESET & they say I must have another AV on my system interfering. I have no other AV present.
 
Suggestions?

A:"Secure Connection Failed" Error since download of ESET

Did you try another browser?I use ESET and Emsisoft Anti-Malware with Firefox...never had an issue.

Read other 1 answers
RELEVANCY SCORE 38.8

Spoiler (Highlight to read)  recently update the window8 to window10, but very soon the computer colaps, not able to boot, don't  even POST.after search on the internet, i reflash the bios with SPIPGM. the computer come back to live, but the system would shut off in a hour each time i power on the computer.  then i try to reflash the bios according to the acer bios update , the computer always give me an alarm, 18-error: unable to start a secure flash session. any hlep would be  appreciated.

Read other answers
RELEVANCY SCORE 38.8

Trying to launch "SAS SECURE TOMORROW" but game will not launch and shows this error, " Game has to close, game.exe etc,etc..
My systems are functioning normally and all drivers are up to date and I can launch all other games

OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz, x86 Family 6 Model 15 Stepping 6
Processor Count: 2
RAM: 2045 Mb
Graphics Card: NVIDIA Quadro FX 3500 , 256 Mb
Hard Drives: C: Total - 238409 MB, Free - 102935 MB; G: Total - 76316 MB, Free - 41266 MB;
Motherboard: Dell Inc. , 0DN075, , ..CN708216CP70P2.
Antivirus: avast! Internet Security, Updated: Yes, On-Demand Scanner: Enabled
 

Read other answers
RELEVANCY SCORE 38.8

I can uninstall certain programs but I cant uninstall F-Secure. I am getting a message saying that "you don't have permission to uninstall due to group policy". I am pretty sure Im virused somewhere?

A:F-Secure wont uninstall and having "group policy error".

Hello RB, lets see if there is malware.I take it you have tried from the Control Panel to remove it.Please download MiniToolBox, save it to your desktop and run it.Checkmark the following checkboxes:Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory size.Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run.Note: When using "Reset FF Proxy Settings" option Firefox should be closed.Download TDSSKiller and save it to your desktop.Extract (unzip) its contents to your desktop.Open the TDSSKiller folder and doubleclick on TDSSKiller.exe to run the application, then on Start Scan.If an infected file is detected, the default action will be Cure, click on Continue.If a suspicious file is detected, the default action will be Skip, click on Continue.It may ask you to reboot the computer to complete the process. Click on Reboot Now.If no reboot is require, click on Report. A log file should appear. Please copy and paste the contents of that file here.If a reboot is required, the report can also be found in your root directory (usually C:\ folder) in the form of TDSSKiller_xxxx_log.txt. Please copy and paste the contents of that file here....ADW CleanerPlease download AdwCleaner by Xplode and save to your Desktop.Double-click on ... Read more

Read other 1 answers
RELEVANCY SCORE 38.8

This has happened on two Venue 10 tablets after the most recent group of "optional" updates. Rebooting after installation causes a Secure Boot error. The fix is to access the bios setup using a keyboard, turn off Secure Boot, reboot and go through the BitLocker recovery routine. The updates are KB3087137, KB3087041, KB3087390, KB3073874, KB2999226, KB3084905. KB3080042, KB3080800, KB3082353. I have no idea which cause the problem. Dell Support says that Secure Boot Off is supposed to be the default condition. Either one of these updates turned it On or it was always On and the update triggered the error.

A:Dell Venue 10 Win 8.1 updates cause Secure Boot Error

I have the same problem with a Dell Venue 8 Pro running Win 8.1. This had been working just fine and the only thing installed recently were the updates you mentioned. I tried doing a system restore to before the updates, but it didn't make any difference. Just get a red box saying Secure Boot Violation - Invalid Signature Detected. Turning Secure Boot off in the BIOS is a workaround, but because device encryption was enabled (it's enabled by default when you sign in with a Microsoft account) it then prompted for the BitLocker recovery key on every cold bootup. Entering a 48 digit key every time is a pain, so for now I have disabled encryption.

I think Dell are mistaken if they say Secure Boot Off is the default condition. It was definitely On already on mine.

I do notice the device boots up quite a bit quicker with the encryption disabled. I will probably just run it the way it is (secure boot and encryption disabled) but does anyone know how to fix this properly? Would a full reset from the recovery partition put things back?

Read other 4 answers
RELEVANCY SCORE 38.8

So today I went to use my computer when all of a sudden I got a message giving me the 3f0 error. I ran a diagnostics test and it said it could not detect the hard drive. I decided to open the pc ( p7-1234) and make all the wires were plugged in (which they were) then tried again. It didn't work so I did some research.I found a bunch of post on forums about people saying open up you secure boot configuration menu and enable legacy bios. The only problem is I don't have that option under the security tab or anywhere to be honest. Can any one tell me what to do now?

Read other answers
RELEVANCY SCORE 38.8

Issue with ESET possibly with just Firefox
 
Issues:
"Secure Connection Failed"
An error occurred during a connection to www.zearn.org. Peer’s certificate has an invalid signature. Error code: SEC_ERROR_BAD_SIGNATURE
    The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Please contact the website owners to inform them of this problem.
Page won't load
if page loads, it might or might not fully work
If page loads, all white with some titles & misc displaced writing
Page might load completely blank
Tried to fix by:
Uninstalling & reinstalling Firefox per directions of troubleshooting Help guide
Uninstalling & re-installing ad-block plus & super script or turning off
Per help guide I changed selection for ESET SSL
I contacted ESET & they say I must have another AV on my system interfering. I have no other AV present.
 
Suggestions?

Read other answers
RELEVANCY SCORE 38.8

Spoiler (Highlight to read)  recently update the window8 to window10, but very soon the computer colaps, not able to boot, don't  even POST.after search on the internet, i reflash the bios with SPIPGM. the computer come back to live, but the system would shut off in a hour each time i power on the computer.  then i try to reflash the bios according to the acer bios update , the computer always give me an alarm, 18-error: unable to start a secure flash session. any hlep would be  appreciated.











Solved!
Go to Solution.

A:18-error: unable to start a secure flash session

after use fpt to flash the bios with a older version, then i am able to run the bios update. 













View solution in original post

Read other 3 answers
RELEVANCY SCORE 38.8

Hi,
I can log into my secure site then when trying to go beyond that, it seems to take along time ("timeout"?) to get to the next secure page. When it finally does I click to access my personal files and instantly I get the error message. I have tried to figure out when this started but it has been a while since trying to access this site. I have read that update 831167 for ie6 corrects this. I have ie7 and cannot put that update in as I get warnings that I don't have ie6 sp1 installed. Also, I have reset the settings in security and enabled all cookies.
Also, I have tried the microsoft "fix it" for the registry and needed to use my XP CD. Still not working. This is bugging me as I was able to use this site 6 months ago.
Any other ideas would be greatly appreciated.
 

A:HTTP 500 internal server error in secure site?

Read other 7 answers
RELEVANCY SCORE 38.4

I don't seem to be getting as good fps as I used to as I think my pc is getting old I was wondering what the best spec to upgrade for my pc would be as I don't want to have to upgrade everything at once
Current Specs:
Monitor: S27C450B Series 4 LED
Graphics Card: NVIDIA GeForce GTX 970
Ram: 8GB
SSD: Samsung SSD 840 EVO 120GB
Processor: Intel(R) Core i7-4790 CPU @ 3.60GHz (8 core)
If I forgot to add anything let me know and preferably please tell me how to find out what it is because I'm not very good when it comes to computer specs
 

A:Struggling to run games

What exact ram? What speed ddr3? Why only 8GB?

If you are gaming , 16GB minimum would be best.

What kind of games do you play? At what resolutions? What graphics settings do you play on now/want to play on?
 

Read other 1 answers
RELEVANCY SCORE 38.4

I've recently gone on broadband with O2 in the UK and after a few weeks my wireless adapter is having trouble finding my wifi box.
It can find others no probs. After about 3 attempts, turning off & on it can eventually find mine, could my internet use or my systems be hindering it's performance?
I'm running Windows XP.
Hijackthis log:
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 19:42:13, on 28/06/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16674)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\Program Files\Java\jre1.5.0\bin\jusched.exe
C:\WINDOWS\SM1BG.EXE
C:\WINDOWS\TBPanel.exe
C:\WINDOWS\system32\RunDll32.exe
C:\Program Files\Sony Ericsson\Mobile2\Application Launcher\Application Launcher.exe
C:\Program Files\O2\bin\sprtcmd.exe
C:\Program Files\SiteAdvisor\6261\SiteAdv.exe
C:\Program Files\Creative\Creative ZEN\ZEN Media Explorer\CTCheck.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\McAfee.com\Agent\mcagent.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Messenger\msmsgs.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Creativ... Read more

Read other answers
RELEVANCY SCORE 38.4

I am still struggling to use the Security portal to come up with a listing of every update I expect to see on my machines under by control.
I am currently using the following resources:
https://blogs.msdn.microsoft.com/dotnet/2017/05/09/net-framework-may-2017-monthly-rollup/
https://blogs.technet.microsoft.com/office_sustained_engineering/2017/05/09/may-2017-office-update-release/
https://support.microsoft.com/en-us/help/4009470/windows-8-1-windows-server-2012-r2-update-history

https://support.microsoft.com/en-us/help/4009469/windows-7-sp1-windows-server-2008-r2-sp1-update-history

https://support.microsoft.com/en-us/help/4018124/windows-10-update-history
https://support.microsoft.com/en-us/help/894199/description-of-software-update-services-and-windows-server-update-services-changes-in-content-for-2017
Even with the api I still can't bundle the report into a "what KB's will I see offered up".  Do you have any other suggestions?

Read other answers
RELEVANCY SCORE 38.4

Computer has latest virus definitions downloaded/installed, latest Windows updates installed, Ad-Aware updated, PC Powerwash updated and still the following problems occur regularly:

1. When going to the windows update site (as opposed to letting it download the files on its own and telling you when new updates are available) it closes the browser window upon clicking "Custom Install".

2. Popups kill the computer. There's this WinFixer that keeps coming up and literally 50 popups at a time occur and make themselves little groups on the windows taskbar.

Here is the HJT log:
Logfile of HijackThis v1.99.1
Scan saved at 11:22:41 AM, on 8/14/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\System32\svchost.exe
C:\WINNT\system32\rundll32.exe
C:\Program Files\Common Files\Symantec Shared\ccProxy.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINNT\system32\spoolsv.exe
C:\PROGRA~1\Grisoft\AVG6\avgserv.exe
C:\WINNT\T3duZXIA\command.exe
C:\Program Files\Norton SystemWorks\Norton AntiVirus\navapsvc.exe
C:\Program Files\Nort... Read more

A:AHH! Struggling to fix a computer

Hello, and welcome to TSF!

Please print out or copy this page to Notepad. Make sure to work through the fixes in the exact order it is mentioned below. If there's anything that you don't understand, ask your question(s) before proceeding with the fixes. You should 'not' have any open browsers when you are following the procedures below.

Go to My Computer->Tools/View->Folder Options->View tab and make sure that 'Show hidden files and folders' (or 'Show all files') is enabled. Also make sure that 'Display the contents of system folders' is checked. If you have Windows XP, the search feature is a little different. When you click on 'All files and folders' on the left pane, click on the 'More advanced options' at the bottom. Make sure that 'Search system folders', 'Search hidden files and folders', and 'Search subfolders' are checked.

For the options that you checked/enabled earlier, you may uncheck them after your log is clean. If we ask you to fix a program that you use or want to keep, please post back saying that (we don't know every program that exists, so we may tell you to delete a program that we think is bad to keep).

===============

Download, unzip to your desktop CWShredder and run it, then:

1. Click "Check For Update"

(If an update isn't available, skip to step #4.)

2. Click "Click here to Download the upate".
3. When the new version has been downloaded, click "Save".
4. Click "Fix ... Read more

Read other 11 answers
RELEVANCY SCORE 38.4

Hi! My english isnt the best, but ill try to explain.

The BSOD suddenly pops up whenever it wants it seems, and I get it alot. Im not a computer man, so I dont understand what to read, or what to do. But I hope you guys can figure out the problem, or atleast get me closer to a solution. Ill add the minidump file here, and hope for quick response on the problem. Just ask me if you have any questions regarding my computer please. Ill answer as fast as I possibly can.

I also noticed a file named MEMORY.DMP which was 211 568kb, should I upload this file too? Or is it something else?

Specs:
Graphics Card: Nvidia Geforce 8800 GT
Processor: AMD Phenom 9850 Quad-Core Processor
Motherboard: MSI K9A2 Platinum
RAM: 4GB (Cant find the name)
OS: Windows XP Sp3

A:Struggling with BSOD

Anyone at all know the issue?

Read other 2 answers
RELEVANCY SCORE 38.4

Hi I am running XP sp3......have problem with hijack also cant access system restore and many security sites (its as if it knows I am trying to kill the problem)....have managed to do a hijack log and another website has advised that you may be able to offer advice......

details are:

Logfile of HijackThis v1.99.1
Scan saved at 12:45:05, on 19/09/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Internet Explorer\Iexplore.exe
C:\DOCUME~1\paul\LOCALS~1\Temp\Temporary Directory 1 for hijackthis[1].zip\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.google.co.uk/ig?hl=en&source=iglk
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start... Read more

A:real struggling

thanks to all - can I leave this for now - I think I may be on the way to resolving the problem without making demands on your time

thnx

Read other 1 answers