Over 1 million tech questions and answers.

driver power state failure

Q: driver power state failure

dear sir,

after i installed win7 64 bit, i kept facing the bluescreen, it shows "driver power state failure", my configuration is as below,

MB: Rampage III Extreme
DRAM: 12GB OCZ
OS: win7 64 bit

can you help me preventing bluescreen again?
attached is the .dmp

appreciated!!

RELEVANCY SCORE 200
Preferred Solution: driver power state failure

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: driver power state failure

Hi -

Run Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or until it BSODs your system, whichever is less. Then . . .

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions - Windows 7 & Vista

Regards. . .

jcgriff2

`

Read other 5 answers
RELEVANCY SCORE 88

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 88

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 88

Hey, I got some BSOD problems. Do you got time & experience to help me?

I got Windows 8 at the moment, I will install 8.1 shortly. Had 8.1 before i re-installed OS when the first BSOD showed up, so I doubt that 8.1 will fix things completely.

My problems ATM!

- Driver Power State Failure
- Video TDR Failiure (nvlddmkm.sys)
- Screen freezes at start up or when I get to the desktop
- Have to Disable my NVIDIA GeForce GTX 675M to use the CPU (Windows has stopped this device because it has reported problems. (Code 43).

Got two other kinds of BSOD before I re-installed windows but don't remember what they said, I just felt like "Hey I need to re-install my OS anyways so w/e". But apparently that didn't solve the problems.

I also gained "NVIDIA Windows Kernel Mode Driver, Version 340.52 stopped working While playing CS:GO" but that was before I re-installed windows. And now to use my CPU I need to go into Device Manager and shutdown my NVIDIA card to be able to use the CPU and use the Intel card instead. If I don't shut it down my CPU will freeze the screen for days, til I restart or I get a BSOD.

I will buy a can of air and open up my laptop and blow some dust away, perhaps that could help? Perhaps the NVIDIA card is burned/broken and I have to buy a new PC?

I've tried a few different driver for my NVIDIA card also, nothing works.

I'm no computer expert and thats why I'm here begging for help, so if someone could help me out here I would appreci... Read more

A:Driver Power State Failure,Video TDR Failure(nvlddmkm.sys)

Hi Markmsigt60 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Fri Sep 26 06:15:51.972 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\092614-55906-01.dmp]

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Windows 8 Kernel Version 9200 MP (8 procs) Free x64

Built by: 9200.16912.amd64fre.win8_gdr.140502-1507

System Uptime: 0 days 0:07:07.738

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Probably caused by : ntoskrnl.exe ( nt+5a540 )

BugCheck 9F, {3, fffffa800892b880, fffff8800326a7f0, fffffa80089c3e10}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800892b880, Physical Device Object of the stack
Arg3: fffff8800326a7f0, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: fffffa80089c3e10, The blocked IRP
BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

FAILURE_BUCKET_ID: WRONG_SYMBOLS

CPUID: "Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz"

MaxSpeed: 2400

CurrentSpeed: 2395

BIOS Version E16F3IMS.50R

BI... Read more

Read other 3 answers
RELEVANCY SCORE 85.6

Hello,

I would appreciate any help with the following problem: the pc sometimes seemingly randomly shows BSOD with errors named in the title, I also attach corresponding screenshots. The problem wont happen if the PC power is supplied from the adapter AND there is some content running on the screen (video in VLC f.ex.). Other important symptoms are: Can not turn off the laptop. There will be endless blue screen saying shutting down,while PC already stopped working. I also can not get the PC to sleep. If i I go to sleep mode, display turns black, PC is still working on and on and I can not go back to desktop anymore.

Thank you very much for your help.

Ales

Read other answers
RELEVANCY SCORE 85.2

Computer was recently updated to Windows 8. When laptop lid is closed and opened, BSOD instead of sleep. I need to know which driver is causing it. "grab all" results attached. Thanks.

A:Driver power state failure

Welcome to Eight Forums,

Looks like a mixture of drivers from Acronis and Total Mounter seems to be the cause of the BSOD.
I would uninstall both these programs and their drivers and see if the sleep mode BSOD is eliminated.
Do you have a SSD and is the firmware for it up to date? Check for one, it may bring stability.

Code:
******************************************************************************** *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa8005c49050, fffff8033d53c7e0, fffffa8009021010}
*** WARNING: Unable to verify timestamp for KSPrt64.sys
*** ERROR: Module load completed but symbols could not be loaded for KSPrt64.sys
Probably caused by : KSPrt64.sys
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRI... Read more

Read other 3 answers
RELEVANCY SCORE 85.2

Hi
Bough a new laptop and about 1 week afterwards I am getting the blue screen of death.
Have a Dell xps, i7 with 6 gig ram and 1 gig video card
Tried to make sense of the minidump file but that seems messed up too.
Attached the latest dump file, hope someone can help me out.

A:Driver power state failure

Quote:





Originally Posted by phillip07


Hi
Bough a new laptop and about 1 week afterwards I am getting the blue screen of death.
Have a Dell xps, i7 with 6 gig ram and 1 gig video card
Tried to make sense of the minidump file but that seems messed up too.
Attached the latest dump file, hope someone can help me out.




Additional info:
Dell XPS L502X
Windows 7 Home Premium
Intel i7 2.2ghz
Ram 6 gb
64 bit operating system
pre-installed Windows
Software and Hardware in use for about 2 weeks
Nvida Geforce GT 525M

Read other 2 answers
RELEVANCY SCORE 85.2

I have a 5 month old Lenovo Thinkpad, Win 32, Vista Basic, SP2 with all updates done. It and a desktop operate on my wireless private home network via a Linksys WRT160N router. On Oct. 2 I added a 1TB My Book World Edition as an auto backup drive and installed Western Digital software on the laptop only. My Book is connected via USB cable to the router. So far, the laptop isn't correctly loading or recognizing or connecting with the Western Digital drives, so no backups. While I'd like to solve that problem, the BSoD is first priority and may be related to the WD install.

I'm unclear about the connection between the events because the first mini dump was Sept. 29, before the WD install. Since Oct. 22, there have been frequent unexpected shutdowns, usually while the laptop is asleep. At various times my apps software has frozen (Word, Outlook) and the shutdown cycle then takes about 10 minutes. The script when recovering from an unexpected shutdown on Oct. 28 was:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 00000004
BCP2: 00000258
BCP3: 84152D78
BCP4: 00000000
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini102809-02.dmp
C:\Users\Jim\AppData\Local\Temp\WER-114769-0.sysdata.xml
C:\Users\Jim\AppData\Local\Temp\WER2847.tmp.version.txt

Read our... Read more

A:Driver State Power Failure

Hello JimPA and welcome to TSF!

You may try these:

1.) Restart your computer Tap F8 and select Last Known Good Command Config and see if everything goes back to normal.
2.) If No. 1 is unsuccesful try uninstalling the WD software
3.) Do you have the 1 TB backup hooked up to your laptop? Unplug it
4.) Maybe you'll need your RAM upgraded
5.) If none of these works, since it's only 5mos old, it's under warranty, I would contact Lenovo.

Read other 7 answers
RELEVANCY SCORE 85.2

Hi, i have same problem with my laptop s55t-c5325...Here i upload the zip file from the log collector, maybe this will help me.

Thank you

A:Driver Power State Failure

Please update your installation to version 10586
Windows 10 Forums

Code:
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 10 Kernel Version 10240 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 10240.16841.amd64fre.th1_st1.160408-1853
Machine Name:
Kernel base = 0xfffff802`4d614000 PsLoadedModuleList = 0xfffff802`4d939070
Debug session time: Wed Jun 1 17:15:51.596 2016 (UTC + 2:00)
System Uptime: 0 days 0:27:18.458
Loading Kernel Symbols
Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

Read other 0 answers
RELEVANCY SCORE 85.2

Windows 7 pro..I have been getting driver power state failure at shutdown. what do i need to copy and post to address this issue? tks

A:driver power state failure

http://www.sevenforums.com/crashes-d...tructions.html

Read other 1 answers
RELEVANCY SCORE 85.2

Good day,
please help with a Blue Screen upon shut-down with a Driver Power State Failure. I found many entries relating to Windows Vista and 7. The ones on XP related to softwares I do not run on my computer. Thank you in advance!

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2600 @ 2.16GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 3071 Mb
Graphics Card: ATI Mobility Radeon X1600 , 256 Mb
Hard Drives: C: Total - 95393 MB, Free - 36492 MB; G: Total - 476937 MB, Free - 454396 MB;
Motherboard: Hewlett-Packard, 309F, KBC Version 54.50,
Antivirus: Kaspersky Anti-Virus, Updated: Yes, On-Demand Scanner: Enabled
 

A:Driver Power State Failure

http://support.microsoft.com/default.aspx?scid=kb;en-us;315249
 

Read other 1 answers
RELEVANCY SCORE 85.2

my OS - XP pro SP2

Every time I try to shutdown my computer a blue screen appears:

Driver_Power_State_Failure
. . .
. . .
Stop (0x00000500 0x00000002 0x(changes every time) 0x81AF3E30).

Can someone Please advise ?

Read other answers
RELEVANCY SCORE 85.2

Hi there,
please could someone help me. My laptop started crashing a little while back after itunes updated so i uninstalled and re-installed it but things got worse an crashes were happening a couple times a day, so i decided to do a fresh windows install to try repair damaged program files. well i am still having issues not as dramatic and as often but i really want to be done with this issue asap. help would be greatly appreciated.

A:driver power state failure

Code:
avgtdia.sys Thu Aug 1 20:06:31 2013 (51FA6B67)
avgrkx64.sys Tue Sep 10 04:42:59 2013 (522E4EF3)
avgfwd6a.sys Thu Sep 26 13:44:43 2013 (5243E5EB)
avgmfx64.sys Tue Oct 1 04:49:53 2013 (524A0011)
AVG contributes to BSOD's. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Code:
TuneUpUtilitiesDriver64.sys Fri May 25 16:28:19 2012 (4FBF5EC3)





Quote:
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence. If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything. 10 Tips on How to Properly Maintain Your Computer


Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Reduce... Read more

Read other 9 answers
RELEVANCY SCORE 85.2

Hi All

New to forum and relatively useless with computers beyond using simple programs.

Recently began experiencing extended shutdown and startup times, started with 5-10 minutes and kept getting longer. Was told that after a few years and two kids downloading everything they clicked on it was probably due to alot of extra junk running. So I saved everything I needed and endevoured to reload the OS (Vista Home Premium 32bit), just pop in the disk and follow the instruction they said, "It's easy" they said.

Everything seemed to progress nicely, followed the prompts, windows will restart several times etc etc.

Runs for approx 48 hours on the scrolling bar then get:

Driver Power State Failure
Stop: 0x0000009F (0x00000003, 0x828EE908, 0x828EE908, 0xC4915340)

Attempted restarts to safe mode or to command prompt are unsuccessful as it is disabled during windows reload

I've read through several of the previous DPSF threads and everyone is asked for a "minidump", please don't ask unless you know a psychic that can commune with my laptop as it will not advanced to any state other than BSOD at this point.

A:Driver Power State Failure

Lets see if its hardware or software, try to boot in safe mode.

Read other 14 answers
RELEVANCY SCORE 85.2

Hello,

I just got a Driver Power State Failure Bsod. Please find attached the dump files. Any help would be greatly appreciated.

Edit: Event Viewer called up 'CtHdaSvc.exe' which is the SB Recon3D Service.

Checking Gigabyte for an update to the audio drivers.

Edit: No new driver on the Gigabyte site. Will reinstall.

A:Driver Power State Failure

Hi brouhahaha,

The Asmedia 106x SATA controller driver has caused the crash.
As a bluescreen crash happened only once, I wouldn't be worried too much about it.
Windows resolves bluescreens that only onces happened.

Code:
0: kd> !irp ffffe001eed11b40
Irp is active with 6 stacks 4 is current (= 0xffffe001eed11ce8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe001ee8336e0 00000000 fffff8011a7d8bd0-00000000 Success Error Cancel pending
\Driver\pci storport!RaidAdapterPowerUpDeviceCompletion
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 ffffe001eeec7050 00000000 fffff8001b92ed78-ffffe001eed12c70 Success Error Cancel pending
Unable to load image asstahci64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for asstahci64.sys
*** ERROR: Module load completed but symbols could not be loaded for asstahci64.sys
\Driver\asstahci64 nt!PopRequestCompletion
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe001eed12c70
Arg... Read more

Read other 0 answers
RELEVANCY SCORE 85.2

A couple of days ago I did a Windows 10 64-bit "clean install" on my Dell Inspiron 1564 Laptop, and it has been running well, basically. However, I did experience a Driver Power State Failure on startup today. It immediately reached 100% complete in collecting error info, but did not restart after (as it said it would). I waited for approximately 10 minutes more and then manually rebooted. It came up fine.

Going forward, I am not sure what I should be doing to correct the situation. If someone has recommendations, I would be appreciative.

By "clean install", I mean I upgraded from 7 to 10 - then I did a computer recovery - reset this pc, at which time I told it to remove all my personal files and applications. I think I have 4 GB of ram, but quite frankly, the system information screen has changed; and even digging into the Device Manager information leaves me no less confused about what is installed. So I hope this is enough of the basics for someone to give me a basic next step.

Thank you,
Minderbinder

A:Driver Power State Failure

If it doesn't pop back up, I wouldn't worry too much about it. Sometimes drivers can fail every once in a while.

Read other 1 answers
RELEVANCY SCORE 85.2

We have been getting the blue screen of death very intermittently over the past several weeks and aren't aware of any new hardware or software that has been installed to cause any issue. Below is the full technical information. Does anyone know what is causing
the BSOD?
Stop: 0x0000009F (0x0000000000000003, 0xFFFFFA800423CA10, 0xFFFFF8000413D748, 0xFFFFFA80078A8CA0)
Thanks!

Read other answers
RELEVANCY SCORE 85.2

I periodically get a driver power state failure BSOD. It's happens about once a week or so.

Relevant files attached.

A:Driver Power State Failure

Check your post again, as there are no files attached.

Also, fill out your system specs. Click on the link in my signature to do it.

Read other 5 answers
RELEVANCY SCORE 85.2

Whenever i try to use my gaming PC for gaming, if the game requires the PC to work a lot the entire PC blue screens and gives an error message saying it is going to restart.

The message at the bottom says: "Driver Power State Failure"

I have tried to fix this by updating drivers but i don't know how to fix this issue.
 

Read other answers
RELEVANCY SCORE 85.2

I'm using a Toshiba Satellite S55-C5363 and I have been semi-frequently getting BSOD due to "Driver Power State Failure." This usually happens when I try to run software that is somewhat graphically intensive, such as solidworks or photoshop. In either case, they run for a period of time (sometimes long, sometimes short), and then I encounter the bluescreen. I believe my computer has a good enough specs to run this software. Either way, I don't think my computer should be crashing.
I have malwarebytes installed and am currently running a scan. I just installed bluescreenview. Let me know if I should download any software and attach any logs. Attached is a log from speccy.
Thank you.
 

Read other answers
RELEVANCY SCORE 85.2

For the last week i've been getting this BSOD whenever i turn on my laptop

I've follwed the instructions and the files that i need to attach so here they are

In the meanwhile my laptop sound also decreased drastically , i found out that one side of it aint working and this also started in the same time period .. coincidence or just hardware fault ?

My laptop

HP G6-2005ax AMD A8 Windows 8 64 bit



Please help

Thanking you

A:DRIVER POWER STATE FAILURE

Hi,

The attached DMP is of the DRIVER_POWER_STATE_FAILURE (9f) bugcheck.

This error occurs if drivers do not handle power state transition requests properly, usually during one of the following procedures: shut down, suspending or resuming from standby, suspending or resuming from hibernation.

From the perfmon:

Symptom:
A service is reported as having an unexpected error code

Cause: One or more services has failed. The service did not stop gracefully, suggesting the service may have crashed or one of its components stopped in an unsupported way.

Details: Service exited with code not equal to 0 or 1077

Resolution: Restart the service


Quote:




Display Name: VMware Workstation Server
Exit Code: 1067
Service Name: VMwareHostd
Path: "C:\Program Files (x86)\VMware\VMware Workstation\vmware-hostd.exe" -u "C:\ProgramData\VMware\hostd\config.xml"
Service Code: 0
Started: False
State: Stopped




---------------


Quote:




Symptom:
Device is disabled.

Cause: A device is disabled preventing it from working properly.

Details: The device, VMware Virtual Ethernet Adapter for VMnet1, is disabled. If this device is no longer used it may be intentionally disabled. The Plug and Play ID for this device is 25.

Resolution:
1. Determine if you need the device.
2. If you need the device, enable it in Device Manager.
3. If you do not use the device it can be left disab... Read more

Read other 9 answers
RELEVANCY SCORE 85.2

Wondering if anyone can help. About 1x/week I'm getting a blue screen that says I have a Driver Power State Failure. I really don't know what to do even though I have read up a little on it.

Anyone have any suggestions on how I can get started fixing this?

A:Driver Power State Failure??

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

Read other 9 answers
RELEVANCY SCORE 85.2

Hi all, this is my first time here, and I need some help.

I'm using an Asus G71GX gaming laptop running Win7 Pro x64, and randomly my computer will just BSOD on me, and reboot. The minidump is too fast for me to read much past the first few lines, so I don't know entirely what's to blame. When it restarts, a dialogue box comes up saying "Windows has recovered from an unexpected shutdown". When I click on the more info tab, this is the information it gives me:


Quote:




Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA80063A8620
BCP3: FFFFF80000B9C4D8
BCP4: FFFFFA800BA8E190
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\091910-19484-01.dmp
C:\Users\Mike\AppData\Local\Temp\WER-42135-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?link...8&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt





Also, when I wake up my computer from sleep, sometimes it doesn't recognize my speakers, and no audio comes out either from my speakers or headphones. If I put my computer to sleep and wake it up again, they're recognized a... Read more

A:Driver Power State Failure

Hi -

Please follow these instructions --> http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

Read other 17 answers
RELEVANCY SCORE 85.2

I have a user whose laptop has been acting up, crashing, freezing, etc. randomly, she was only using word.

Her BSOD happened after awaking from sleep. Error message was "driver power state failure" stop: 0x0000009f (or however many zeros!). She had to pull the battery to get the laptop to restart.

I've attached the SF zip file - any help appreciated!

Thanks
erin

A:driver power state failure

Probably caused by : nusb3xhc.sys NEC Electronics USB 3.0 Host Controller Driver: Support/Design | Renesas Electronics

Update Driver: RENESAS/NEC Drivers & Firmwares

Read other 3 answers
RELEVANCY SCORE 85.2

SOMEONE PLEASE TRANSLATE THIS AND SOLUTION FOR IT.
Primary Analysis

Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (http://www.osr.com)
Online Crash Dump Analysis Service
See http://www.osronline.com for more information
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 9600.17031.amd64fre.winblue_gdr.140221-1952
Machine Name:
Kernel base = 0xfffff802`68012000 PsLoadedModuleList = 0xfffff802`682dc2d0
Debug session time: Mon Feb 4 01:14:45.855 2019 (UTC - 5:00)
System Uptime: 0 days 0:12:28.784
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe00008c64aa0, Physical Device Object of the stack
Arg3: ffffd00183669930, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: ffffe00009c57c80, The blocked IRP

Debugging Details:
------------------

TRIAGER: Could no... Read more

Read other answers
RELEVANCY SCORE 85.2

Every now and then my laptop bluescreens and I get this error.  Does anybody know how to fix it?
 
 

A:driver power state failure

Hi
 
 
We need to collect some basic info to analyze and find the reason behind the crashes. So please follow the below steps.
 
Upload the crash dumps for analysis
 
Open C:\Windows\Minidump folder. Copy and  zip the entire contents of that folder and upload to any free file hosting site of your choice. You may have to disable User Account Control to copy them.
 
  Example file hosting sites :
 
  https://www.box.com/
 
  http://www.mediafire.com/
 
  http://www.sendspace.com
 
Post the download link to the dumps in next reply.
 
 
A Speccy report about your system
 
  Generate a report about your system using Speccy by reading the guide below. Make sure to run the Speccy after running the system about one or more hour. This will give us an indication of current CPU -GPU temperature status.
 
   http://www.bleepingcomputer.com/forums/t/323892/publish-a-snapshot-using-speccy/
 
 Post the web link displayed by Speccy in next reply.
 
A Minitoolbox log
 
  Download Minitoolbox from the below link.
 
http://www.bleepingcomputer.com/download/minitoolbox/
 
 
  Run the tool and only select the following tick boxes.
 
    -List last 10 Event viewer errors
    -List installed programs
    -List devices
    -List users, partition and memory size
 
Now click "Go" and post the output... Read more

Read other 12 answers
RELEVANCY SCORE 85.2

I have a Toshiba Satellite C55T-A. Running windows 10 since December. Was running Windows 8.1 previously.  The last few days my computer has been slow to shut down and start up. A blue screen comes up saying it ran into a problem and needs to shut down.then shows this message. Driver Power State Failure. i don't know if I added what I should have. if not, you will have to tell me how to do in very easy computer ease talk.  Thanks for help.
 

 SysnativeFileCollectionApp.zip   2.61MB
  3 downloads

Read other answers
RELEVANCY SCORE 85.2

Hi
I have just upgraded from windows XP 32 to window 7 64
My cursor is really jittery and typing is delayed
if I leave my computer in idle then i get the blue screen and one of the messages is 'driver power state failure'
I've got the dmp files zipped but not sure how to attach to this thread
I suspect that I need to remove or update a driver?
any help would be greatly appreciated
thanks
Tim

A:'driver power state failure'

Just click on the paperclip in the tool bar on the reply/edit post.

Here is a tutorial that will explain it.

How to Upload and Post a Screenshot and File in Seven Forums

Read other 4 answers
RELEVANCY SCORE 85.2

Running an HP Quad Core with Vista Home Premium SP2. The last two months I've been getting BSOD's on hibernation. Error message indicates it a DRIVER POWER STATE FAILURE.

I've updated all drivers and uninstalled software added just before the first BSOD, with the exception of Skype. Attached a .zip with the last four MiniDump files. I've tried analyzing them with Windbg, but I can't get the symbols to load properly.

Any assistance would be greatly appreciated.

A:Driver Power State Failure x9F

Hello and welcome to TSF.

It's not just you that can't get the symbols to load, they aren't loading for me neither. Where is the OS from? There's no Built by: line, either...

Read other 14 answers
RELEVANCY SCORE 85.2

hi,
i am getting a driver power state failure any idea's where it's coming from also i know the DVD Rom is reporting a error and i have ordered a replacement so that maybe the source of the issue to.
Thanks,
Nathan Saunders

the system is a windows 7 pro 64 bit.

A:Driver Power State Failure

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800dab3680, Physical Device Object of the stack
Arg3: fffff800049d1518, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: fffffa8013b5bb00, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IRP_ADDRESS: fffffa8013b5bb00

DEVICE_OBJECT: fffffa800e1f4c70

DRIVER_OBJECT: fffffa800cd10220

IMAGE_NAME: cdrom.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4ce79298

MODULE_NAME: cdrom

FAULTING_MODULE: fffff88001b4e000 cdrom

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre

DPC_STACK_BASE: FFFFF800049D7FB0

STACK_TEXT:
fffff800`049d14c8 fffff800`035028d2 : 00000000`0000009f 00000000`00000003 fffffa80`0dab3680 fffff800`049d1518 : nt!KeBugCheckEx
fffff800`049d14d... Read more

Read other 2 answers
RELEVANCY SCORE 85.2

I just tried to restart my laptop and it took like really long to restart .. basically it was stuck at the "Restarting blue'ish screen" and after a while displayed some texts like "collecting info ....... Driver_Power_State_Failure"

After googleing a bit, it seems lots of people suggests its likely being caused by a damaged/outdated driver or something similar but I checked the device manager and I don't have any errors/yellow sigh anywhere and also tried checking updates for Ethernet/wifi adapters etc .. it just says I already have the latest version.

I've installed a few new softwares on pc recently but I'm don't think these can actually cause this issue, itunes latest version and a virtual wifi router: this one: https://virtualrouter.codeplex.com/ (don't know if I should link it here but incase it helps)

Also I don't think I've any virus issues, running comodo + maleware bytes ... so far no detection's.

Any advise how to fix it?
OS: Win 8.1 64bit

System config
--------------
Asus X555LF
Intel? Core? i3 5010U Processor
DDR3L 1600 MHz SDRAM 8GB
NVIDIA? GeForce? 930M with 2GB DDR3 VRAM
1TB HDD

Read other answers
RELEVANCY SCORE 85.2

In the last few weeks I've been getting stuck and when rebooting I get a blue screen and minidump w/Driver Power State failure. Please help? I've done PERFORM/REPORT and attached.

A:Driver Power State Failure

Hi -

There are no attachments to your post.

Run Driver Verifier - http://www.techsupportforum.com/f217...ed-473665.html

Provide full system info - http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

Read other 2 answers
RELEVANCY SCORE 85.2

Hey i have a problem with my toshiba satellite it does not boot up correctly when i start the computer it takes long time than usual and also after it starts the windows 7 wallpaper comes and normally there is a log in button to log into my pc but now theres no login button its only the normal windows 7 wallpaper.
Well One night i was using the computer and i was using speed up my pc and playing games and it got very slow and it got a lot stuck so i had to force it down and after i start it up again it says the computer was unable to boot properly and stuff but after that i have tried few stuff and now no error comes up but it does not start correctly i have no way on going into my computer.
The stuff i did was i tried sfc and it was not able to fix the problems it said check the cbs file or something for the logs of the errors and also before the errors come up but after i did all four of these no errors come it starts but no login button only windows 7 wallpaper this is what i tried doing
type > bootrec /fixmbr
type > bootrec /fixboot
type > bootrec /scanos
type > bootrec /rebuildbcd
Those four i tried.

Like i just told i tried all those four options of bootrec and it made the computer boot up but only the windows 7 wallpaper is there when it should be the windows 7 wallpaper and a log in button but the login button is not there i can post pictures if needed.

Startup repair could not fix the problems.
Sfc could not fix the problems.
Bootrec c... Read more

A:Driver Power State Failure

I get a Driver_power_state_failure with a stop : 0x0000009F(0x00000004,0x00000258,0x8658F020,0x8397CB24)

Yesterday i was working with my computer and i was running a game and fix my pc and it was very slow it got stuck and i forced it down and when i start the pc i get that error.

I have tried sfc and bootrec and startup repair none of them can fix the problem it says unable to fix the problem.
I also have the recovery disk and can view the hard disk files and also use cmd but i tried the startup repair and it could not fix the problem.

Please help here is few pictures:

Read other 8 answers
RELEVANCY SCORE 85.2

Hi! I am Monjur Alahi from bangladesh. I have a HP Pavilion Notebook, recently i sufferd a problem during start up . Its take too much time display a message which is " Driver Power State Failure". How can i fix the problem with my Notebook ? Help me Please

Read other answers
RELEVANCY SCORE 85.2

Hello I m using Intel base pc but after installation of windows 8 I m facing a problem......
when I start my pc after boot it's show blue screen " power driver State failure" what is men pleases help me any one my system configuration is below and I am put the link of my sky Drive there is Minidump File and System Information

Main Board Intel Dx58so
Prosser Core i7 930
Hard Disk 160 GB WD
320 GB W
VGA ATI 4650
WIFI TPlink TL-722n

SkyDrive Link

https://skydrive.live.com/?cid=a3c35...2101E1D%211904
Download the file and tall me what I do after show Blue Screen "power driver State failure" I update my WIFI Driver but doesn't work pleases help me thanks
Goher Altaf

Read other answers
RELEVANCY SCORE 85.2

Does anyone have any suggestions for the following issue:
 
http://www.bleepingcomputer.com/forums/t/588804/driver-power-state-failure/
 
Thank-you.
 
 

Read other answers
RELEVANCY SCORE 85.2

Someone help me with this computer failure. See attached computer dump.

A:Power Driver State Failure

Hi, welcome to the forums You may need to post at our BSOD forum :-

BSOD, App Crashes And Hangs - Tech Support Forum

However as your error sites Ntoskrnl.exe and this is generic (probably not the cause) it may be a simple ACL's problem (many are) so run a chkdsk, in safe mode, cmd prompt, chkdsk/f

Read other 1 answers
RELEVANCY SCORE 85.2

Hello!

So there's this problem that I'm having with my computer. (laptop)
It seems to take absurdly long to shutdown, and I occaisionally get the BSOD 'Driver_Power_State_Failure'

Also, the CPU usage ranges from 70-99%. This is definitely not normal behavior.

I used to be playing Starcraft II with everything on medium-high, and have no issues whatsoever, now I'm even having trouble with low settings.

My laptop is an Asus k42jv, 4gb of RAM. What information do you guys need?

EDIT: Did I mention that previous BSODs had the computer collect data for crash dump, and recent BSODs have my computer crashing on the BSOD? (i.e. it's not able to collect data during the BSOD)

EDIT2: The latest BSODs : A device driver attempting to corrupt the system has been caught. The faulty driver currently on the kernel stack must be replaced
with a working version. This happened during shutdown, and when I rebooted, I was sending Microsoft information about 'this unexpected crash' and all of a sudden I was greeted with another Driver Power State Failure BSOD. My computer is extremely laggy and is constantly running at full speed (I can tell from the fans). Urgent help needed!

A:Driver Power State Failure help

When you get the bluescreen, do you get this information on the blue screen :
"Stop 0x0000009F"
and this: "(00000003, parameter2, parameter3, parameter4)" ?

Without dump files your job will be made much harder, because if you can't identify the exact driver that is causing the problem then it probably makes sense to replace/update all of you drivers, one at a time.

See here for instructions:
DRIVER_POWER_STATE_FAILURE 0x0000009f - Microsoft Answers

Sometimes when you look at the Properties for your devices in Device Manager you might see a problem device clearly. You also may have clues as to which device from your use of your laptop. And of course, if you've made any system changes or installations around the time the behavior cropped up now would be the time to mention that.

Read other 5 answers
RELEVANCY SCORE 85.2

-Win 8.1, recently upgraded from 8
- x64
- Win 8 was the original OS on the laptop
- OEM, came pre-installed
- 1.5 years
- Upgraded to 8.1 about a month ago

- i7 4700MQ
- GT 750M

- Lenovo
- Y410p

-Laptop

I can't access my System Health Report, whenever I try to run perfmon/report in cmd (As administrator), I get an error message saying THE OPERATOR OR ADMINISTRATOR HAS REFUSED THE REQUEST. I can manually view the report in Performance Monitor but I have no idea how to save it from there, there is no option to save the report anyhow.

A:Driver Power State Failure

Hi. . .

BSODs appear to be related to USB, but the dumps are not giving up the 3rd party driver name.

See if Driver Verifier flags any 3rd party drivers - http://www.techsupportforum.com/foru...ed-473665.html

Regards. . .

jcgriff2

`

Read other 2 answers
RELEVANCY SCORE 85.2

Hi all,
Recently my Windows 7 Pro 32-bit computer I built with an ASUS board started blue-screening on entering sleep mode. It also usually won't shut down properly. I'm getting a Driver Power State Failure bluescreen, stop 0x0000009f. Any help in resolving this would be appreciated!

A:Driver Power State Failure

Please provide this information: http://www.techsupportforum.com/f217...ns-452654.html

Read other 3 answers
RELEVANCY SCORE 85.2

not too long ago, after being put on sleep mode, my hp touchsmart has been showing a message on a blue screen and it says something about the power state driver has failed or something, i have no idea how to resolve this, does anyone know how i can? i would really appreciate it. thanks

Read other answers
RELEVANCY SCORE 85.2

Hi Allfor the past days I've bumped into BSOD Driver Power State Failure quite a few times. All my drivers are up to date, but I suspect my BIOS not to be. My BIOS version is: CDCN26WW, 12-10-15. Could the problem be around the BIOS?

Read other answers
RELEVANCY SCORE 85.2

i have a toshiba satellite u405d-s2874 and i was transferring files from one portable hard-drive to another and i got a blue screen with the driver power state failure on it. the laptop restarted and all and i thought that maybe it fixed itself or something like that so i contiinued doing what i was doing and now after a while the laptop goes to the blue screen with the power state failure. i searched for it on google and it lead me to a post on your site. i read it and its about the same problem cept for the power button on the harddrive thing. its happened about 3 times or so while i was trying to read the post and sign up for your site. please need some help...oh can you tell me if i made a good buy by buying a toshiba??
 

A:Driver Power State Failure

Have the same laptop and same problem. As far as I can tell it is due to a bad SD card reader driver. I downloaded the "Debugging Tools for Windows x64" from here and used it to load the memory dump file located in "C:\WINDOWS\Minidump". You can follow the description here on how to do this. The debugger identified the file "o2sdx64.sys" as the culprit so I went over to toshiba here and downloaded the latest SD reader driver. The old version of this file was identified by the device manager as 2.0.2.909 and after updating was 2.0.2.915.

I have not tested this for long but so far no BSOD. I did notice this error seemed to occur often when I was swapping files off the SD card I am hopful.

Hope this helps.

By the way I am running Vista x64
 

Read other 1 answers
RELEVANCY SCORE 85.2

Hi
I have just upgraded from windows XP 32 to window 7 64
My cursor is really jittery and typing is delayed
if I leave my computer and it goes idle then i get the blue screen and one of the messages is 'driver power state failure'
I've got the dmp files zipped and attached to this thread
I suspect that I need to remove or update a driver?

Not sure if this is helpful or not but I have pasted the results of a WhoCrashed test

any help would be greatly appreciated
thanks
Tim

On Mon 5/30/2011 9:49:09 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\053011-47315-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7FD00)
Bugcheck code: 0x9F (0x3, 0xFFFFFA80164EE050, 0xFFFFF80000B9C518, 0xFFFFFA800B946850)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.
 

Read other answers
RELEVANCY SCORE 85.2

So I have an Asus ROG laptop and I've recently started having some issues with it, one of them being this driver state power failure bsod. Its happened 3 times now in the past two weeks.

I haven't exactly nailed down what causes it, but I've done some research and most places suggest updating drivers and BIOS to fix it.

The first issue I'm having with this is that I'm unable to update my BIOS. I've got the file downloaded from the Asus website, I put it on a flash drive and tried to use the EZ Flash 3 utility to update the BIOS but it doesn't see the flash drive. In fact it doesn't see any drive at all except for one 256 MB partition on the main hard drive (laptop has an SSD and 2nd hard drive for storage). I've tried formatting the drive in FAT32 as old documentation suggested it might need that but still no luck. I've tried several flash drives and no luck. I read that USB 3.0 might be the problem, but the laptop only has 3.0 ports. So not sure what I can do about that if that is the actual problem.

Some other additional information, a few days ago I noticed my power brick for charging the laptop got extremely hot as it was under some blankets and such. How long that was going on I don't know. Could the charger be the problem? When it BSOD'd a couple hours ago it was shortly after I unplugged it (30 seconds-ish). But this did crash before I noticed the power brick issue so I don't know if its been a thing for that long or not.

Also I did update my video card... Read more

Read other answers
RELEVANCY SCORE 85.2

My lenovo ideapad 15ibd model no.80qq after upgrading win 8.1 shows driver power state failure.. It also does not accept the nvidia geforce driver it asks for intel driver first ..my laptop has dedicated nvidia gt920m graphics card... Please help me...I have been trying troubleshooting for one week no solutions is there. Also in the device manager it says no 3d video controller driver found .its so frustrating.. I bought my laptop just recently . Pls help.

Read other answers