Over 1 million tech questions and answers.

Driver power state Failure BSoD

Q: Driver power state Failure BSoD

hey
sometimes when i shut down my computer it takes forever to shut down and then i get a BSoD. i attached a zip file with the dumpfiles.
hope you guys can help me
regards kayabrico

RELEVANCY SCORE 200
Preferred Solution: Driver power state Failure BSoD

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Driver power state Failure BSoD

Hi,

The attached DMP files are all of the DRIVER_POWER_STATE_FAILURE (9f) bugcheck.

This error occurs if drivers do not handle power state transition requests properly, usually during one of the following procedures: shut down, suspending or resuming from standby, suspending or resuming from hibernation.

IMAGE_NAME: asmthub3.sys

MODULE_NAME: asmthub3

FAULTING_MODULE: fffff88006d73000 asmthub3

Running an !irp on the blocked IRP address (4th parameter of the bugcheck) we get:


Code:

0: kd> !irp fffffa80148ba3c0
Irp is active with 7 stacks 6 is current (= 0xfffffa80148ba5f8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8013d45430 00000000 fffff80002e776f0-fffffa80155be4c0 Success Error Cancel pending
\Driver\asmthub3 nt!IopUnloadSafeCompletion
Ultimately, it appears asmthub3.sys is the culprit here, which is the ASMedia USB 3.0 Hub driver.

0: kd> lmvm asmthub3
start end module name
fffff880`06d73000 fffff880`06d97000 asmthub3 T (no symbols)
Loaded symbol image file: asmthub3.sys
Image path: \SystemRoot\system32\DRIVERS\asmthub3.sys
Image name: asmthub3.sys
Timestamp: Wed Nov 02 23:00:32 2011 (4EB203D0)

Yours is dated from 2011 and the latest is from 2013 via your motherboard product page. Update ASAP - RAMPAGE IV EXTREME - Motherboards - ASUS

Regards,

Patrick

Read other 19 answers
RELEVANCY SCORE 100.4

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 100

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 98

Hey, I have been experiencing the BSOD for around 1-2 months now, its not that frequent but when it happens it consistently happens throughout the day, also after it relaunches the sound it all messed up and crackly. Im currently using the Alienware M17x which i heard it is quite common on, Any help would be greatly appreciated.

dump files in attachment


(Great my dump files are 9.37mb what can i do?)

A:BSOD - Driver state power failure

Not a clue what to do now, just found out my dump files are 9.37 MB which is over the limit you can put on here, any suggestions?

Read other 2 answers
RELEVANCY SCORE 98

Hello,
I have been experiencing BSODs since I bought this cpu almost a year ago. The time between blue screens can range from a couple of hours to over a month. I use my computer mostly as a gaming laptop and most of the blue screens occur while I game. However, they have occasionally occured while I was just surfing the internet. It is always a driver power state failure blue screen. On to the cpu specs:

Alienware M17x R3
? OS - Windows 7
? 64 bit
? The OS came pre-installed
? The system is almost 1 year old, bought in august of 2011
? Dual graphics card: Intel(R) HD Graphics 3000/NVIDIA GeForce GTX 460M
? Processor: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz, 2201 Mhz, 4 Core(s), 8 Logical Processor(s)

I heard Mcafee could cause blue screens and so I recently deleted it, however I just got a BSOD earlier today with it deleted.

A:Driver power state failure BSOD

48 hour bump

Read other 14 answers
RELEVANCY SCORE 98

hello,
is the second time (after resintalling windows 7 64-bit original copy) that my PC doesn't turn off and the BSOD - Driver power state failure appears. After that, I can't log in into windows (the computer doesn't charge windows). I have attached the dmp file. i don't know how to do to solve the problem.

thank you very much

Andrea

A:BSOD - Driver power state failure

Hi and Welcome back to SF!

This is probably driver issue. Please update the following driver

Code:
iaStorV iaStorV.sys Wed Apr 08 23:57:17 2009 (49DCD76D)
It was blamed in the dmp, the date of driver is old as well, please update it right now.
Intel Matrix Storage Manager driver


Code:
ASACPI ASACPI.sys Mon Mar 28 09:30:36 2005 (42476C4C)
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 10th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads

BUGCHECK SUMMARY:

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\TUANTR~1\AppData\Local\Temp\Rar$DI00.205\090410-1445895-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*e:... Read more

Read other 2 answers
RELEVANCY SCORE 98

My computer crashes randomly. Giving me the blue screen error, Driver Power State Failure. Not sure how to resolve this issue.
Assistance required ASAP.
I'm working on a senior project and my computer crashing is eating up valuable time.

A:BSOD Driver Power State Failure

Hello win7ndhlp.

You are facing some extensive network related crashes. And this is behind them all.

Code:
fffff880`031d72f8 fffff880`02ecf96eUnable to load image \SystemRoot\system32\DRIVERS\SymIMv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SymIMv.sys
*** ERROR: Module load completed but symbols could not be loaded for SymIMv.sys
SymIMv+0x196e
Description here: Driver Reference Table - SymIMv.sys

I dont believe that the best policy of network security is network blocking.

Uninstall Norton and all Symentec products using Norton Removal tool.
AND OMG

Code:
Start Menu\Programs\AVG 2011
Start Menu\Programs\AVG PC Tuneup 2011
Start Menu\Programs\AVG PC Tuneup 2011\Utilities
Start Menu\Programs\McAfee Security Scan Plus
What have you done! 3 AV programs at a stage, specially two crapware!!! Get rid of them at once. Uninstall AVG using AVG Remover. Uninstall McAfee Using McAfee Removal Tool. NEVER use more than one real time protection program. Use Microsoft Security Essentials as your only antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one.

For your USB network adapters (EVDO) you need to do some general USB related troubleshooting. For the port, first, uninstall and reinstall the USB ports drivers.
Right click on Computer icon > manage. It will open the computer management window.
Click on "Devi... Read more

Read other 9 answers
RELEVANCY SCORE 98

Hello, having a driver power state failure. Can't figure out the driver thats causing the problem. Any advice on fixing? Thanks

A:bsod driver power state failure

Hello soupbox.

As a test, can you disable the webcam via device manager, and see if it continues to crash, or stops?

Whatever may the result be, let us know.

Read other 4 answers
RELEVANCY SCORE 98

Hello, I am having random BSOD crashes mostly when browsing on internet.

My Build is
- x64
- Original OEM
- > 1 month old
- > 1 month old, never reinstalled.

Any help is more than welcome.

A:Driver State Power Failure BSOD

Hello and Welcome !

Seems like lot of issues are going on. First thing i noticed is sptd.sys duplex driver which i well known for BSOD. I would recommend to uninstall it follow this article DuplexSecure - FAQ

Also it looks to me like it's an issue with AiCharger.sys - an Asus program named AiCharger (may also be a part of the Asus AISuite or ASUS Ai Charger). Then uninstall the current copy of the program and install the freshly downloaded copy.

Run a Hardware Diagnostic (Memory and Hard Drive) follow this link for instructions Hardware Diagnostic !! ? Captain Debugger

Bugcheck:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80083a1060, fffff8000460e518, fffffa80060214c0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+292b0 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *... Read more

Read other 8 answers
RELEVANCY SCORE 98

Hi,

I'm new to this forum but i hope you can help with BSOD issues on my windows 7 Laptop.

I have a HP HDX18 Laptop that is about 8months old. I bought it with Vista home premium and upgraded to windows 7 home premium when it was released. As soon as i upgraded i started having blue screen of death problems (BSOD) problems. The laptop became unusable as it would crash intermittantly. It turned out to be my anti-virus software, Zone Alarm and so i swapped to Kaspersky.

About two months ago the machine started running slowly, locking up and crashing. I wasn't able to complete any tasks, there didn't seem to be any system restore points and it was completely unusable and so i decided i would recover to factory condition (Vista) and start again. I have done this and reloaded Windows 7 update and normal windows software. I also upgraded again to windows 7 ultimate so i would have networking capability as my other computers are XP pro and a Mac and the networking function in Win 7 home premium is worse than useless.

This all completed successfully last week and within a few days i am again having problems. I cannot shutdown my laptop, it will hang (saying 'shutting down') for about five minutes and then BSOD. I have attached the minidumps files using the SF Diagnostic Tool from this forum.

I also cannot use any usb ports, backup and have trouble with some proprietory HP software.

First things first, i need to find out why i cannot shut down so hopefully someone can ... Read more

A:BSOD - driver power state failure

  
Quote: Originally Posted by onyxquark


Hi,

I'm new to this forum but i hope you can help with BSOD issues on my windows 7 Laptop.

I have a HP HDX18 Laptop that is about 8months old. I bought it with Vista home premium and upgraded to windows 7 home premium when it was released. As soon as i upgraded i started having blue screen of death problems (BSOD) problems. The laptop became unusable as it would crash intermittantly. It turned out to be my anti-virus software, Zone Alarm and so i swapped to Kaspersky.

About two months ago the machine started running slowly, locking up and crashing. I wasn't able to complete any tasks, there didn't seem to be any system restore points and it was completely unusable and so i decided i would recover to factory condition (Vista) and start again. I have done this and reloaded Windows 7 update and normal windows software. I also upgraded again to windows 7 ultimate so i would have networking capability as my other computers are XP pro and a Mac and the networking function in Win 7 home premium is worse than useless.

This all completed successfully last week and within a few days i am again having problems. I cannot shutdown my laptop, it will hang (saying 'shutting down') for about five minutes and then BSOD. I have attached the minidumps files using the SF Diagnostic Tool from this forum.

I also cannot use any usb ports, backup and have trouble with some proprietory HP software.

First things... Read more

Read other 9 answers
RELEVANCY SCORE 98

For the last few days my system is hanging on shutdowns (and restarts) and eventually ending with a BSod. Please help :-(

TIA

Don

System Info:
? OS - Windows 7 Home Premium
? x64
? HP Pavilion DV6 less than 1 yr old
? Age of OS installation
? Core 2 Duo P8800
? ATI Mobility Radeon HD 4530

A:BSod Driver Power State Failure

Additional files

Read other 3 answers
RELEVANCY SCORE 98

Hi, my computer is being shutdown a few times with the Blue Screen and I have no idea what's going on. I have the Windows 7 and suposedly I have no hardware problem and/or compatibility but I have been reading the posts and I don't know what to do. So I have uploaded the DUMP files so you guys can give me a help. What should I do???

A:Driver power state Failure BSoD

Hi,

The timestamp on the driver that is causing the crash (nvm62x64.sys) is Sat Oct 18 10:01:06 2008 which is far to old for a Windows 7 system. Try updating the drivers, you should find them here (look for your motherboard chipset): http://www.nvidia.co.uk/Download/index.aspx?lang=en-uk

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80039b5a20, fffff80000b9c518, fffffa800785f700}

*** WARNING: Unable to verify timestamp for nvm62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for nvm62x64.sys
Probably caused by : nvm62x64.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_... Read more

Read other 4 answers
RELEVANCY SCORE 98

This is a HP pavilon dm4 Laptop, windows 7 64 bit.

The BSOD seems to always happen when the computer is plugged in, although it has happened a couple times when it wasn't. Its never when I am in the middle of doing something, only when I leave the computer alone for a while will it crash like this. For example, even if I am just listening to music or watch a movie, it doesn't crash. It's like it does this when it gets bored or something... As long as it is doing something it is fine.

I updated the drivers using HP's tool, but the problem hasn't gone away.

A:BSOD Driver Power State Failure

Sorry, I posted the incomplete file the first time... Here are the other files because the complete .zip file exceeded the maximum size.

Read other 2 answers
RELEVANCY SCORE 98

Current OS
? Windows 7 Home Premium
? 64-bit

? What was original installed OS on system?
Windows Vista Home Premium 64-bit.

? OEM version (came pre-installed on system) or full retail version?
OEM Version.

? Age of system
7-8 Months.

? Age of OS installation
Windows 7 just installed, but i had this problem previously with Vista.

? CPU
Intel i7 920

? Video Card
Nvidia GTX 285

? MotherBoard
Not sure.

? Power Supply - brand & wattage
Not sure.

Thank you for your time. :)

A:BSOD driver power state failure

Hi -

The bugcheck on the lone mini kernel dump -

0x9f (0x6,,,) = driver in an inconsistant state of power; the power transition timed out waiting to synchronize with the Pnp

The first driver was named the probable cause of the BSOD. They all need to be updated -
[/font] [/code]

Code:

RTSTOR64.SYS Tue Dec 02 01:01:40 2008 (4934CF44) - Realtek USB 2.0 Card Reader

e1y60x64.sys Mon Aug 18 17:45:05 2008 (48A9ED61) - Intel(R) 82567LF-2 Gigabit Network Connection
gwfilt64.sys Thu Apr 10 04:20:29 2008 (47FDCDCD) - Realtek HD audio
SCDEmu.SYS Tue Aug 07 11:19:48 2007 (46B88D94) - PowerISO Computing, Inc.

Realtek HD Audio --> http://www.realtek.com.tw/DOWNLOADS/...&GetDown=false

Realtek USB card reader drivers --> http://www.realtek.com.tw/downloads/...&GetDown=false

Intel Intel(R) 82567LF-2 Gigabit Network Connection --> http://www.intel.com/support/etherne.../cs-029669.htm

Power ISO - see system manufacturer's web site.

Un-install Daemon Tools/ Alcohol 120. The driver common to each has caused many BSODs in Windows 7 systems.

Regards. . .

jcgriff2

.




Windows 7 x64 - Bugcheck 0x9f (0x6,,,)

Code:

Opened log file 'C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\_99-dbug.txt'

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading ... Read more

Read other 6 answers
RELEVANCY SCORE 98

Hello, I seem to be having a bit of a problem with Windows 7. The computer seems to crash whenever Im using it. It's not limited to specific tasks... it crashes whenever it wants. When it does happen, i'll get a 0x9f error.
Not really sure what info to include but here's what I know the computer has:

Model: Sony Vaio AR250G
HDD: 180GB SATA drive (I think)
RAM: 2GB
Processor: Intel Centrino Duo
OS: Windows 7 Ultimate 32 bit

Ive attached some dump files too, I hear that they are useful.

Any help is really appreaciated.
Thanks a bunch.

A:Driver State Power Failure BSoD

It appears as if your webcam drivers are causing the issue. Please uninstall them and install the latest version.

These old drivers need to be updated:
Code:
826c0000 826fd000 ti21sony ti21sony.sys Mon Feb 20 19:32:31 2006 (43FA5F9F)
826fd000 827a7880 slim slim.sys Fri Jun 30 04:13:28 2006 (44A4DD28)
88e09000 88ec9000 iaStor iaStor.sys Tue Feb 21 19:44:28 2006 (43FBB3EC)
88efe000 88f0e780 SI3132 SI3132.sys Wed Sep 21 12:04:55 2005 (433184A7)
88f7a000 88f85080 PxHelp20 PxHelp20.sys Fri Oct 28 14:29:12 2005 (43626DF8)
88f86000 88f88880 SiWinAcc SiWinAcc.sys Mon Nov 01 15:21:31 2004 (41868CBB)
895e2000 895e3480 SiRemFil SiRemFil.sys Tue Sep 20 18:18:19 2005 (43308AAB)
8a810000 8a8d0000 dump_iaStor dump_iaStor.sys Tue Feb 21 19:44:28 2006 (43FBB3EC)
8a921000 8a925b20 AegisP AegisP.sys Mon Oct 24 10:38:50 2005 (435CF1FA)
8f421000 8f8615c0 nvlddmkm nvlddmkm.sys Tue Feb 20 20:05:48 2007 (45DB9AEC)
8f971000 8f997e00 e100b325 e100b325.sys Fri Nov 16 13:53:32 2007 (473DE72C)
8f998000 8f9c1000 Apfiltr Apfiltr.sys Tue Dec 05 06:26:00 2006 (45755748)
8fc33000 8fcd6000 stwrt stwrt.sys Tue Feb 06 13:14:55 2007 (45C8C59F)
8fd1e000 8fd4f580 HSFHWAZL HSFHWAZL.sys Tue Oct 18 19:52:32 2005 (43558AC0)
8fd57000 8fd5e580 SonyImgF SonyImgF.sys Mon Mar 06 04:38:59 2006 (440C0333)
8fe19000 8fe30000 5U870CAP 5U870CAP.sys Fri Jun 30 04:27:08 2006 (44A4E05C)
8fe34000 8ff27d00 HSF_DPV HSF_DPV.sys Tue Oct 18 19:53:21 2005 (43558AF1)
8ff2... Read more

Read other 2 answers
RELEVANCY SCORE 98

I don't even know why this started but it did a few weeks ago. Funny, I've never had a BSOD before even though I've owned 3 or 4 computers. Anyway, this one has occurred several times and it always seems so random. It kinda seems connected to Standby or Hibernate because it usually happens after one of those two things occurs. In fact with hibernate I can usually guess that right after it comes out of hibernate, a few minutes later I will be greeted with the wonderful BSOD.

Here is the minidump. Help would be very appreciated.

A:Driver Power State Failure BSOD

Only ran the last 5 memory dumps (the 6th one was from December, so I left it out).

A couple of KB articles that relate to the errors that you're getting and the sleep/hibernate functions:

KB 975599 Stop error when you put a computer that is running Windows 7 or Windows Server 2008 R2 to sleep or into hibernation, or when you restart the computer: "0x9F"
KB 977186 Error message when you try to resume a Windows 7-based or a Windows Server 2008 R2-based computer from hibernation: "Stop 0x0000009F"

4 of the dump files blame atapi.sys (a Windows driver), while the 5th blames Apfiltr.sys (a component of your Alps touchpad drivers)

I'm not sure about the exact cause - but I would:
- check to see if the KB articles above apply to your system
- update your Alps touchpad drivers
- update your chipset/storage drivers
- update your graphics drivers

You can get the drivers from here: Select software and drivers HP Pavilion dv4-1225dx Entertainment Notebook PC - HP Customer Care (United States - English)
Please uninstall the old drivers first, then install the freshly downloaded one's.

Please post back if that doesn't stop the BSOD's.

Summary of the BSOD's:

Code:
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Fri Apr 23 21:30:31.203 2010 (GMT-4)
System Uptime: 0 days 3:05:41.747
BugCheck 9F, {3, fffffa8004c1c680, fffff80000ba2748, fffffa800834fc60}
Probably caused by : atapi.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: firefox... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hello,

I have been receiving BSODs after a new build. I have been holding off on re-installing the OS to see if there is a fix for this error. I suspect it may have something to do with my samsung 950 pro nvme drive.

? Windows 10 Home
? x64
? Original installation
? full retail version
? 2 weeks
? 2 weks
? I have not re-installed the OS

? Intel Core i5 6600k
? EVGA 780 Ti
? Asus Maximus VIII Heor
? Seasonic Snow Silent 750 watt platinum

Read other answers
RELEVANCY SCORE 98

Hello- First-timer! Sorry, I hope this isn't a redundant post. I'm not too savy and don't understand all the lingo so go easy on me.

Backstory: This is my first post and I'm very new to the computer world (beyond the basics). I decided to try and take on my first build (everything new except PSU and case). Everything seemed fine until recently.

Problem: I keep getting the BSOD shortly after coming out of sleep mode. It mentions "Driver Power State Failure". I have read several posts claiming similar happenings but all of the replies seem very specific to people's hardware and associated drivers so I wasn't sure how to apply it to my situation. Any help is greatly appreciated.

I have attached my dump files.

Thanks!

A:BSOD - Driver Power State Failure

Hello Doonga. This crash is caused my M Audio drivers.

Code:
Irp is active with 9 stacks 7 is current (= 0xfffffa80101bc8c0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa800ee08060 00000000 fffff88004384fd4-fffffa800ee337a0
\Driver\usbhub ks!CKsDevice::CompleteDevicePowerIrp
Args: 00000000 00000000 00000000 00000002
>[ 16, 2] 0 1 fffffa800ee33c20 00000000 00000000-00000000 pending
\Driver\MAUSBFASTTRACKULTRA
Args: 00041100 00000001 00000001 00000002
[ 16, 2] 0 e1 fffffa800ee3be30 00000000 00000000-00000000 pending
\Driver\ksthunk
Args: 00041100 00000001 00000001 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800fe96220
And that is very old.

Code:
start end module nam... Read more

Read other 4 answers
RELEVANCY SCORE 98

Hello,

I made a thread about this already but no one would reply can someone help me please? I really want to get rid of this BSOD
I want to know what the problem is, thanks

http://sdrv.ms/14ltYEj

edit: windows 8

A:Driver power state failure (BSOD)

I'm late for work, please post back in order to remind me to follow up on this topic (I get email notification when you reply)>

Make sure that you have ALL available Windows Updates
While waiting, start with these free diagnostics: Initial Hardware Diagnostics

Analysis:
The following is for informational purposes only.

Code:
**************************Thu Aug 1 14:52:25.525 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\080113-27580-01.dmp]
Windows 8 Kernel Version 9200 MP (8 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 4:29:58.649
*** ERROR: Module load completed but symbols could not be loaded for partmgr.sys
*** WARNING: Unable to verify timestamp for amd_sata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_sata.sys
Probably caused by :amd_sata.sys
BugCheck 9F, {3, fffffa800e4515a0, fffff80017199770, fffffa800e4407b0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800e4515a0, Physical Device Object of the stack
Arg3: fffff80017199770, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa800e4407b0, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_disk_IMAGE_amd_sata.sys
BIOS Version 1503
BIOS Release Date ... Read more

Read other 1 answers
RELEVANCY SCORE 98

i have a vista x32 system and i keep getting the error

DRIVER_POWER_STATE_FAILURE

STOP 0x0000009f ( 0x00000003, 0x85b6e6f0, 0x85719030, 0x85a8eaf8 )

i really have no idea what to do about fixing this someone please help! thanks

A:BSoD Driver power state failure

Start by providing us with this info: http://www.techsupportforum.com/1871981-post2.html

Also, have a look at this stuff while waiting for a reply: http://www.techsupportforum.com/1871981-post2.html

Read other 1 answers
RELEVANCY SCORE 98

? OS -Windows 7
? x64
? Vista x64 original
? Age of system ~ 4yrs
? Age of OS installation - just reinstalled about a month and a half ago
? Q6700 quad core 2.66
? 2x 8800gt
? Asus p5n-e sli
? Power Supply - xion 800watt


the blue screen usually happens after the computer hibernates or something similar. i know it happens alot more than i actually see because i come back to my computer and it will have a recovery message. if theres anything else i need to post just let me know.

A:BSOD Driver power state failure

Are you overclocking - either the system or the video card? If so, please stop until we're finished troubleshooting.

Please check the KB articles about hibernation/sleep at this link: http://www.carrona.org/bsodindx.html#0x0000009F

There are 11 memory dumps
3 different BSOD errors
and 4 different causes blamed (all are hardware or Windows drivers)
This makes a hardware failure a possibility. In particular, you have 4 STOP 0x124 errors - which are usually either hardware or compatibility based. Please follow the instructions for troubleshooting STOP 0x124 errors here: http://www.sevenforums.com/crash-loc...-what-try.html

The P5 series of motherboards tends to have issues with RAM in Win7. Please don't use the Auto setting in the BIOS - rather, visit the website of the RAM manufacturer, get their recommended settings and use them in your BIOS.

Asus doesn't completely certify your motherboard for Win7 - so you may have issues that involve compatibility. Also, in this case, there is a driver present that is a known cause of BSOD's (ASACPI.sys dated from 2005). As there are no Win7 compatible drivers listed, you'll have to download the Vista 64 bit version and install it in Comaptibility mode. Again, this will be at your own risk as there's no guarantee of compatibility.

Here's the link to the page for the driver: http://support.asus.com/download/dow...ge=en-us&os=30
Expand the Utilities section and download the "ACPI driver for ATK 0110 virtual device&quo... Read more

Read other 3 answers
RELEVANCY SCORE 98

Hi,

I had a bsod the other day and it said "Driver power state failure" stop 0x0000009f. Can anybody help me?

A:BSOD Driver power state failure

Hi,

BSOD mentions win32k.sys - a Microsoft driver which is probably not the real cause.

So, run the driver verifier to try and get the real cause to show itself.

Driver Verifier - Enable and Disable

Also remove SPTD.sys which is known to cause BSODs; remove Daemon Tools, then use this SPTD installer to remove it (pick the uninstall option when you run the installer): DuplexSecure - Downloads

When you get a few more BSODs then please follow these Blue Screen of Death (BSOD) Posting Instructions exactly.

Regards,
Reventon

BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sat Nov 20 12:56:49.103 2010 (GMT+13)
System Uptime: 1 days 12:26:37.883
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
DEFAULT_BUCKET_ID: CODE_CORRUPTION
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
Bugcheck code 1000009F
Arguments 00000000`00000004 00000000`00000258 fffffa80`03d03040 fffff800`046614d0
??????????????????????????????????????????????????????????????????????????????????????``

Read other 2 answers
RELEVANCY SCORE 98

I am getting these "driver power state failure" crashes with increasing frequency. I suspect it's a driver conflict involving my M-Audio Fast Track Ultra (music recording interface), which is connected via USB.

My computer is an HP 671-340US notebook, bought in June or July 2010, with Windows 7 Home Premium (and a whole bunch of HP bloatware!) already installed. I have eliminated some of the HP crap because it constantly interrupted my work, and shut down my computer right in the middle of what I was doing, if I missed the message balloon. Don't know if that contriubuted to the problem. I updated all the drivers and Win7 yesterday and today. Crashed again this morning. No hardware upgrades; using it the way it came.

I have attached all the system specs and diagnostics reports you requested.

If I missed anything, please let me know.

Thanks!

Charlie

A:BSOD Driver Power State Failure

  
Quote: Originally Posted by jgm34787


I am getting these "driver power state failure" crashes with increasing frequency. I suspect it's a driver conflict involving my M-Audio Fast Track Ultra (music recording interface), which is connected via USB.

My computer is an HP 671-340US notebook, bought in June or July 2010, with Windows 7 Home Premium (and a whole bunch of HP bloatware!) already installed. I have eliminated some of the HP crap because it constantly interrupted my work, and shut down my computer right in the middle of what I was doing, if I missed the message balloon. Don't know if that contriubuted to the problem. I updated all the drivers and Win7 yesterday and today. Crashed again this morning. No hardware upgrades; using it the way it came.

I have attached all the system specs and diagnostics reports you requested.

If I missed anything, please let me know.

Thanks!

Charlie


Hi charlie and welcome.

You are of course correct about M-audio. It is blamed. It may be conflicting with one of the older drivers installed. I would update both M-audio and these old drivers. Some of these drivers including y our raid driver is from as far back as 2005.


Code:
iirsp.sys 12/13/2005 5:47:54 PM fffff880`015a0000 fffff880`015b1000 0x00011000 0x439f418a
nfrd960.sys 6/6/2006 5:11:48 PM fffff880`016b3000 fffff880`016c3000 0x00010000 0x4485ef94 ... Read more

Read other 2 answers
RELEVANCY SCORE 98

Hi there, since last week (as far as I remember) I've been having this problem when I try to shutdown my PC.
It takes ages on the shutdown screen and then it crashes, prompting the BSOD.
I'm attaching the files requested made by the SF tool.

A:BSOD: Driver power state failure

Hello Lugdunon.

I guess the Cam3820 PC camera device that you are using in not very much compatible with your system, and the driver is of 2008.

Code:
0: kd> !irp fffffa8006cdbc10
Irp is active with 11 stacks 9 is current (= 0xfffffa8006cdbf20)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa8008a97050 00000000 00000000-00000000
Unable to load image \SystemRoot\System32\Drivers\cam3820.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for cam3820.sys
*** ERROR: Module... Read more

Read other 3 answers
RELEVANCY SCORE 98

Hello,

please can you help me with this BSOD?

Thank you

Petr

A:BSOD Driver power state failure

Welcome to SevenForums.

Looks like 5U877 UVC driver for Ricoh camera is the cause of the BSOD.

Description: Driver Reference Table - 5U877.sys

Code:
kd> !irp fffffa800a7f90c0
Irp is active with 18 stacks 15 is current (= 0xfffffa800a7f9580)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
..........
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e0 fffffa8009771a00 00000000 fffff880028c3350-00000000 Success Error Cancel
\Driver\usbccgp STREAM!SCDevWakeCompletionRoutine
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 1 fffffa80036ed050 00000000 00000000-00000000 pending
Unable to load image \SystemRoot\system32\DRIVERS\5U877.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for 5U877.sys
*** ERROR: Module load completed but symbols could not be loaded for 5U877.sys
\Driver\5U877
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 fffffa800971e660 00000000 00000000-00000000 pending
\Driver\ksthunk
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa80085d2870

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm 5U877
start end module name
fffff880`0288c... Read more

Read other 1 answers
RELEVANCY SCORE 98

I get a BSOD after working for a while and there seems to be nothing in common with the activities I am working on when it occurs. Computer is a HP Pavilion tx100 laptop with Vista Home Premium. I have attached the dump files from several occurrences. There were some additional files that for some reason I could not zip but are listed in a tex file included in the zip file. If you need them let me know and I'll try and send them

Thanks for any insight you can provide.

A:BSOD Driver Power State Failure

Thanks for the additonal info in the text file. These are the BSOD messages that are saved in your Event Viewer and will likely correspond to the dump files that I'm analyzing right now. The zip file contains 14 memory dump files from late May until very recently.

They are primarily STOP 0x9f errors with a single STOP 0xfe error.
The STOP 0x9f errors are a DRIVER_POWER_STATE_FAILURE error,
While the STOP 0xfe is a BUGCODE_USB_DRIVER error

So, the most likely cause here is a USB device that's having trouble with "suspend" operations. Do you have any USB devices attached to your laptop? Does this problem go away when they're unplugged?

Now we wait for the analysis to finish......

Phew! It's finally done!

So, the analysis shows the primary suspect as being ATSwpDrv.sys (dated from August of 2007) - which is a component of the AuthenTec Fingerprint Reader. It's usually hooked up internally to the USB bus, so this tends to confirm the initial suspicions.

The HP website doesn't show a TX100 laptop, but does show 36 different versions of the TX1000. Use this link to determine the exact model of your laptop: http://h10025.www1.hp.com/ewfrf/wc/d...t_page=product (it's the numbers that number 1 points to) Let us know what the model number is.

Next, go to Start and type in "control system" (without the quotes) and press Enter.
Let us know what it says under System...System Type

Armed with that information, we can visit this site an... Read more

Read other 19 answers
RELEVANCY SCORE 98

Hello,

i have started to get BSOD on the last couple of days. I can't think of anything newly installed or changed that might cause this. I hope that maybe you can find whats wrong from the information that I have attached.

Thanks in advance
Best regards
John

? OS - Windows 7 Ultimate SP1
? x64
? Original os Windows XP.
? retail
? Age of system less than two years
? Age of OS installation less than two years
? CPU - Intel Core2 Duo T9600
? Video Card - Nvidia Quadro NVS 160M
? MotherBoard - unknown
? Power Supply - unknown
? System Manufacturer - Dell
? Exact model number Latitude E6500

A:Driver power state failure BSOD

Hello,

It seems your Dell HSPA drivers are causing the issue. Try uninstalling the drivers for now, and if you really need the device, install these ones: Drivers and Downloads

...Summary of the dumps:

Code:

Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Tue Aug 9 16:32:04.422 2011 (UTC - 4:00)
System Uptime: 0 days 23:44:45.475
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
FAILURE_BUCKET_ID: X64_0x9F_3_ANALYSIS_INCONCLUSIVE
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Mon Aug 8 15:05:25.831 2011 (UTC - 4:00)
System Uptime: 0 days 8:29:32.160
*** ERROR: Module load completed but symbols could not be loaded for WUDFRd.sys
*** WARNING: Unable to verify timestamp for d554gps64.sys
*** ERROR: Module load completed but symbols could not be loaded for d554gps64.sys
*** WARNING: Unable to verify timestamp for d557bus.sys
*** ERROR: Module load completed but symbols could not be loaded for d557bus.sys
Probably caused by : d557bus.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: vlc.exe
FAILURE_BUCKET_ID: X64_0x9F_3_IMAGE_d557bus.sys
BiosReleaseDate = 07/30/2010
SystemProductName = Latitude E6500
??????????????????????????????????????... Read more

Read other 2 answers
RELEVANCY SCORE 98

Hello,

I am new to this forum, which I found online while searching for a fix to a BSOD I'm repeatedly having. I am hoping someone could help me out because it is getting extremely frustrating. The PC is used as a dedicated media center. So having the system go down multiple times during a movie is not fun at all.

I first noticed a problem with Win 7 about 10 or so days ago. The OS seemed to be slower than normal when logging on, but no issues other than that. Shortly thereafter when I would switch my TV input to my PC I was continually getting the login screen. I did a little research and it was suggested to change the Windows option to not restart on failure, which I did.

After making that change I noticed a repeated BSOD, with a Driver_Power_State_Failure message. The time varies on how long it will take before I get the crash, but it happens with certainty right now. Windows is also extremely slow logging in, and completely crashes after initial login frequently as well.

The only change that I can pinpoint is that I used a SATA to USB HDD converter to backup a hard drive. Well, attempted to backup. I cannot complete this due to system crashes. Also, I was having repeated system crashes with a portable HDD plugged in, and after unplugging it the system started on the next boot. This could be a coincidence, but I have not troubleshooted that further.

System Specs

? OS - Windows 7 ? x86 64bit ? What was original installed OS on system? - Win 7 Pro ? Is th... Read more

A:BSOD - Driver Power State Failure

I currently have Driver Verifier running, and installed Speccy. Link to output - http://speccy.piriform.com/results/e...uBcUrMpiUSPB2G

Read other 4 answers
RELEVANCY SCORE 98

Hi

I recently changed the case and added some internal peripherials to my computer. I have a 950W power supply so what I have should not be Bluescreening my computer. I cannot open the ,dmp files to find out what is going on. Can anyone help?

My system:
Win 7 Ultimate 32bit
950W power supply
4 hard drives
2 Super Mulit Optical drives
1 flash card bay
Asus motherboard (that was running fine before I changed cases)
in win IRONCLAD case (4 120 fans, and 1 huge fan)

I am attaching the BSOD for today as a zip file.

A:BSOD with Driver power state Failure

Make and model of your Asus mobo?

Please post the info from this topic: http://www.sevenforums.com/crashes-d...tructions.html

Initial triage suggests a problem with vclone.sys - a component of your VirtualCloneCD driver.
This theory is also supported by the presence of drivers related to it that date from 2002 (ElbyCDFL.sys and
ElbyVCD.sys)
I'd suggest uninstalling it to see if that stops the BSOD's

Also, your Norton shows up in the memory dumps, so I'd keep an eye on that.

PLease remove or update these older drivers. DO NOT use Windows Update or the update function of Device Manager:

Code:

ElbyCDFL.sys Thu Nov 28 09:18:04 2002 (3DE6259C)
- ElbyCDIO Filter Driver
- Driver Reference

dvd43llh.sys Mon Feb 07 13:16:49 2005 (4207B091)
- DVD For Free by RIF
- Driver Reference

ElbyVCD.sys Thu Nov 28 05:43:49 2002 (3DE5F365)
- VirtualCloneCD Driver
- Driver Reference

SI3114r.sys Wed Oct 03 17:45:37 2007 (47040D81)
- Silicon Image driver
- Driver Reference

DRVMCDB.SYS Fri Jul 21 14:20:31 2006 (44C11AEF)
- Drive Letter Access Component of Roxio Drag-to-Disc
- Driver Reference

SiWinAcc.sys Thu Jun 14 20:02:27 2007 (4671D713)
- Silicon Image driver
- Driver Reference

PxHelp20.sys Mon Jul 24 20:18:21 2006 (44C5634D)
- Sonic CD/DVD driver (used by many different CD/DVD programs)
- Driver Reference

DLARTL_M.SYS Thu Feb 08 23:04:41 2007 (45CBF2D9)
- Shared Driver Component of Roxio Drag-to-Disc
- Driver Reference

DLACDBHM.SYS Thu Feb 08 23:05:12 2007 (... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hello.

I am looking to resolve my BSOD error. It all of the sudden started doing it yesterday. The only thing I had installed was Blackberry Desktop Manager.

I have included the dumps to see if any of you can help me solve the problem.

My system:

Gateway P7811-FX
CPU - 2.26
Mem - 4GB DDR3
VC - 9800m GTS
HD1 - 200GB
HD2 - 320GB
Screen - WUXGA 1900x1200

Doubt any of that helps, but thanks.

Jerry - IA

A:BSOD - Power Driver State Failure

Hi -

Please follow these instructions - http://www.techsupportforum.com/1871981-post2.html


Attach the zip files to your next post.

Then run the Driver Verifier - http://www.techsupportforum.com/2110308-post3.html

Regards. . .

jcgriff2

.

Read other 4 answers
RELEVANCY SCORE 98

Hello all,

I recently 'inherited' a computer from a friend, and for the most part, it seems to run fine. It just has this one teeeeeeny issue - it's crash dumping and BSODing every time I shut it down. Up until today, the problem was limited to when I try shut it down; it did not occur any other time. For the first time today, it happened while I was using the computer.

It gives the Driver Power State Failure message but does not specify a driver. I've gone through, checked, and updated every driver possible in the device manager. I've run the memory diagnostic (3 times, twice with 2 passes and one time the more comprehensive scan). No problems found there. For some reason I can't get the hard drive self test to run (wondering if it's related to this issue or if it's because I reformatted the drive when I installed Windows 7?).

? OS - Windows 7
? x86 64-bit
? What was original installed OS on system? Vista
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)?
? Age of system (hardware) I'm not certain exactly, as it was a gift, but I would guess mfg date around 2008
? Age of OS installation - have you re-installed the OS? I have reinstalled the OS, about 3 weeks ago.

? CPU - AMD Athlon 64 X2 Dual Core Processor 4200+ 2.20 GHz
? Video Card - NVIDIA GeForce 6150 LE
? MotherBoard - Hematite XL GL8E
? Power Supply - It's the original power cord - tag is gone, but there's some printing on the cor... Read more

A:BSOD - Driver Power State Failure

Hello Redcatt and welcome to TSF!

It appears that all of the attached dumps are 9F DRIVER_POWER_STATE_FAILURE bugchecks that do not point to a conclusive driver. No issue, let's get this sorted!

In the latest dump for example, as you can see here... there are four arguments:


Quote:




DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa80020d1a20, Physical Device Object of the stack
Arg3: fffff80000b9c518, Functional Device Object of the stack
Arg4: fffffa80043d20d0, The blocked IRP




Using WinDbg, let's run an !irp on the 4th arguments address.

After running that, we NOW get a culprit driver as you can see here:


Quote:




0: kd> !irp fffffa80043d20d0
Irp is active with 8 stacks 6 is current (= 0xfffffa80043d2308)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] ... Read more

Read other 7 answers
RELEVANCY SCORE 98

Hi,

i got my notebook (MSI GE60) a month ago and since then i'm experiencing BSOD. It doesn't happen regularly. Sometimes it happens twice a day, sometimes nothing happens for 2 days .

Below i attached the dump files.

If any other info needed let me know.

A:BSOD: driver power state failure

two things, first Uninstall Daemon tools and then run this program:

Duplex secure

when you run the tool if the uninstall box is greyed out then your done If it is not then click it and let it uninstall. DO NOT click the install button It will install a Driver known to cause BSODs.

Second I notice that your video card driver (which is what the crash dumps are blaming as the problem) Is one of the drivers from the Dec 29 batch there are two things you can try, seeing if there is another update, I have heard tell that there is a beta driver that might solve the problem, or you can install an older driver and see if it fixes things. the drivers can be found here.

Read other 9 answers
RELEVANCY SCORE 98

OS: Windows 7 Ultimate
? 32-bit
? Age of system: 2~ years
? Age of OS installation: Two Weeks
? CPU: AMD Athlon X2 Dual-Core QL-60 1.90GHz
? Video Card: ATI Radeon HD 3200 Graphics
? MotherBoard: Not sure..
? Power Supply - brand & wattage: HP Part No.: 384019-002 Wattage: input - 100-240V~1.7A 50-60hz. output: 18.5V - 3.5A 65W (I wasn't sure which to put, so I just put everything I saw.)

After installing Windows 7 Ultimate (I had windows 7 RC before, and it ran fine), I've been getting a BSOD at random times that says:
DRIVER_POWER_STATE_FAILURE
0x00000009f

Then it would automatically restart. When it starts up again, usually it says that my system shut down unexpectedly and it asks if I want to search for solutions, but it keeps happening. The only programs that I can think of which are running at most times that these BSOD's come up are google chrome, windows live messenger, explorer.exe and microsoft word. I would appreciate any kind of solution.

A:BSOD - Driver Power State Failure

Hi -

The bugchecks on the 2 dumps -

0x9f (0x3,,,) - driver in an incosistant power state and blocking an IRP for too long a time

The Microsoft MSDL SYM site used to obtain symbol files to identify Microsoft OS componants is unable to ID the NT Kernel in your Windows system. I don't know the reason for this.

Run the System File Checker/ Repair utility -
START | type cmd.exe into the start search box | right-click on cmd.exe | select run as Administrator | type the following:

Code:
sfc /scannow
Upon completion re-boot to allow files in use to be repaired.

SFC general info - http://support.microsoft.com/kb/936212
SFC & the CBS log - http://support.microsoft.com/kb/928228

Validate your Windows OS installation at the Microsoft Genuine Advantage site.

WGA --> www.microsoft.com/genuine

I don't know how you got a 2007 driver for Avira in your system -


Code:

avgio.sys Thu Feb 22 09:57:32 2007 (45DDAF5C) - Avira anti-virus
AGRSM.sys Mon Nov 10 09:56:37 2008 (49184BA5) - Agere SoftModem Driver

There is not much that I can do with the symbol errors present.

I would suggest that you re-install Windows 7.

Regards. . .

jcgriff2

.

BUGCHECK SUMMARY

Code:

*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Debug session time: Mon Mar 15 16:40:53.697 2010 (GMT-4) ... Read more

Read other 2 answers
RELEVANCY SCORE 98

OS - Windows 7 pro x64 - In place upgrade (since November 2009)

original installed OS - Vista Business x64 - OEM

System is 1 year and 3 months old

CPU - Intel Core 2 Quad Q6600 @ 2.40GHz

Video Card - Nvidia Geforce 9500 GT (1GB)

Motherboard - Asus - IBIBL - LB (benicia)

power supply - Coolmax M-500B - 500watts

The past week I noticed that every time I put my computer to sleep, I would notice that my monitor would either stay on or I'm assuming after a short while come back on while the rest of the computer was sleeping. My monitor by the way is a Samsung Syncmaster 2232BW plus. I noticed this monitor staying on problem at least 3 times this week. So today, I left my computer on, and when it tried to automatically enter sleep mode, a stop error occurred. This is the first time that I got this blue screen as the computer tried to enter sleep mode. Other system information that might be useful: I have a wireless mouse and keyboard, both logitech and both are operating with setpoint. I also have a Creative SB X-Fi sound card installed. Furthermore, shortly before this post I went to device manager and updated the driver for my videocard.

A:Driver Power State failure BSOD

Hi -

The bugcheck on the single dump file -

0x9f (0x4,,,) = driver is causing an inconstant power state - it is not able to sync with the PnP subsystem. The default NT Kernel named as probable cause.

I believe it to be a combination of NIC + Norton Internet Security.

Your D-Link DWA-556 Xtreme N PCIe Desktop Adapter driver must be updated - too old for Windows 7 -

Code:

jswpslwfx.sys Mon Apr 28 19:59:25 2008 (481664DD)

However, there are NO Windows 7 drivers listed for it and the April 2008 Vista driver appears to be the most recent available.

D-link Support DWA-556 --> http://www.dlink.com/products/?pid=DWA-556&tab=3

If you cannot locate an updated driver, the device will need to be replaced.

Remove NIS/ N360 from your system -

Download the Norton Removal Tool (NRT); save to desktop. Boot into SAFEMODE - NO Networking. Tap F8 key during boot-up. Go to desktop, RIGHT-click on the NRT icon and select Run as Administrator. When complete - re-boot.

NRT - ftp://ftp.symantec.com/public/englis...moval_Tool.exe

Reset the Windows Firewall to its default settings -
START | type firewall.cpl | select firewall.cpl above under programs | top-left, select "Restore Defaults"

Install MS Security Essentials --> http://www.microsoft.com/Security_Essentials/

Regards. . .

jcgriff2

.

Windows 7 RTM x64 -- BSOD Bugcheck 0x9f (0x4,,,)

Code:
Opened log file 'C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\_... Read more

Read other 2 answers
RELEVANCY SCORE 98

I updated my HP Pavilion from Vista to Win 7 and since then have experienced a Driver Power State failure crash on a regular basis.

System Specs are: 3 GB Ram, 32 OS, Intel Quad Core 2.3 ghz

I have hopefully attached the dump files that will help in diagnosing the problem.

Any help would be truly appreciated! Thanks!!!


Bob

A:Driver power state failure BSOD

  
Quote: Originally Posted by rbdig


I updated my HP Pavilion from Vista to Win 7 and since then have experienced a Driver Power State failure crash on a regular basis.

System Specs are: 3 GB Ram, 32 OS, Intel Quad Core 2.3 ghz

I have hopefully attached the dump files that will help in diagnosing the problem.

Any help would be truly appreciated! Thanks!!!


Bob


Hi Bob

We need the actual DMP file. yours is an unreadable html file.

Let us know if you need help

Ken

Read other 2 answers
RELEVANCY SCORE 98

this is happening every day now, can anyone help?

A:BSOD driver power state failure

Hi,
Please reconfigure windows to collect the correct info
You want small memory dumps - "MiniDumps"

http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

And here are the instructions for posting:

http://www.sevenforums.com/crashes-d...tructions.html



   Tip
Ensure you click the "GRAB ALL" button and then wait for each window to appear in turn and then click OK

Cheers

Dave

Read other 9 answers
RELEVANCY SCORE 98

? OS - Vista/ Windows 7 ? Windows 7 Home Premium
? x86 (32-bit) or x64 ? 32-bit
?What was original installed OS on system? Yes.
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Factory installed.
? Age of system (hardware) 15 months.
? Age of OS installation - have you re-installed the OS? Haven't reinstalled.
? CPU Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz (2 CPUs), ~2.0GHz
? Video Card NVIDIA GeForce GT 130M
? MotherBoard Mobile Intel(R) 4 Series? I'm unsure of how to find this information.
? Power Supply - brand & wattage Unsure about this as well.
? System Manufacturer MSI
? Exact model number (if laptop, check label on bottom) MS-1722

Hello, I've been having some problems with recent random BSODs. I had the same problem several months ago, but it went away on it's own. If you could give me any ideas on what's up and how we can fix it, I'd really appreciate it. Thank you!

A:BSOD: Driver Power State Failure?

Please uninstall Daemon Tools as it's sptd.sys driver is known to cause BSOD's on Win7 systems. Then use this free tool to ensure that the offending sptd.sys driver is removed from the system: DuplexSecure - FAQ

The BSOD's blame o2sd.sys - a component of your Memory Card Reader software by O2Micro. Please download and install this driver to see if that fixes the problem: MSI Global ? Download Center
Also, please take care of these:
OLDER DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please update these drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers:

Quote:





Code:

sptd.sys Sun Oct 11 16:54:02 2009 (4AD245EA)
iaStor.sys Thu Jun 04 21:42:33 2009 (4A287809)
amdxata.sys Fri Mar 19 12:19:01 2010 (4BA3A3F5) - Windows Update will take care of this if it's available
speedfan.sys Sun Sep 24 09:28:47 2006 (4516880F)
giveio.sys Wed Apr 03 22:33:25 1996 (316334F5)
dump_iaStor.sys Thu Jun 04 21:42:33 2009 (4A287809)
LMouFilt.Sys Tue Aug 24 1... Read more

Read other 3 answers
RELEVANCY SCORE 98

I've been dealing with random BSOD for months now when I sleep/hibernate my computer. Lately it has gotten quite bad and happens nearly everytime. I'm thinking it is a hardware issue, but I'm trying to rule out a software issue. I've tried to update every outdated driver on my laptop to the latest version. Nothing seems to help.

I've also run full hardware diagnostics/memory scans, and that doesn't reveal any problems.

Any help before I throw the computer out the window would be appreciated!

Thanks,
Michael

A:BSOD Driver Power State Failure

raterus, welcome to SF .

You mentioned several bugchecks occurring over a period of a few moths yet the file
contains not more than one dump file, if you have the rest please upload them as well.

As for the bugcheck in question.

The predominant driver of the stack is nvkflt.sys:


Code:
fffff800`00b9c4e0 fffff880`0470b854 nvkflt+0x38854
fffff800`00b9c4e8 fffff880`0470c938 nvkflt+0x39938
fffff800`00b9c4f8 fffff880`046f32d4 nvkflt+0x202d4
fffff800`00b9c518 fffff880`0470daa8 nvkflt+0x3aaa8
fffff800`00b9c520 fffff880`046f327c nvkflt+0x2027c
fffff800`00b9c580 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c598 fffff880`046e569c nvkflt+0x1269c
fffff800`00b9c618 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c630 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c638 fffff880`0470daa8 nvkflt+0x3aaa8
fffff800`00b9c648 fffff880`046e569c nvkflt+0x1269c
Driver Reference Table - nvkflt.sys

If we check it's time-stamp we can see that it is not inline with your description of the problem
being it is very recent.

Code:
Timestamp: Fri Aug 09 21:59:07 2013
Driver Version 9.18.13.2078
Download the latest version offered by your OEM.
Dell Support
Attachment 285494
Looking at the bugcheck we can see it's due to the PNP-subsystem:

Code:
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
... Read more

Read other 7 answers
RELEVANCY SCORE 98

Hi folks. I'm getting the Driver Power State Failure blue screen in Windows 7 x64. Here are my vitals:

It's an HP dv6-3052nr laptop with a fingerprint scanner.

? Windows 7 x64 Home Premium OEM - I have not reinstalled the OS since I got it from HP, and I am ok with doing that if need be.
? This is a brand new laptop, it's only like 2 months old at most
? Intel Core i7 720QM, 6GB ram
? ATI Mobility Radeon HD 5650
? No idea what the motherboard or power supply is

This is your run of the mill new laptop. I use it for web browsing and communication, but I use it as a music recording computer, so I have some music programs installed. Also, I have a USB audio interface for music recording as well.

The blue screen has happened twice in the last two days, and once a few days ago. I have been getting a popup dialog that says "Windows has recovered from an unexpected shutdown" on startup as well too; it happens after the blue screen error but it has also happened after I have closed the lid on the laptop. I think the cause is actually my fingerprint reader, because it has its own sleep/wake cycle and it doesn't always wake when I open my laptop up.

I have attached all requested files as per the BSOD posting instructions. I hope you guys can help me out! Thanks for everything.

Read other answers
RELEVANCY SCORE 98

First let me give a huge "THANKS" for this extremely helpful forum and service. I would not have any hope of correcting this issue on my own or without giving up my machine for a few days to an IT pro to fix it, which I do not have the luxury of time to do.

Here are my details:

? Windows 7 Professional (6.1.7601 Service Pack 1 Build 7601)
? x64
? Vista Premium (2009)
? Original Vista was installed already, Windows 7 upgrade came from a retailer and I installed it.
? Age of system (hardware) - 3 years
? Age of OS installation - have you re-installed the OS? I have not re-installed, but there are multiple copies of it because I added a new HDD and cloned the original before making the new one the primary HDD.

? CPU - Intel Core2 Duo T9550 @ 2.66GHz
? Video Card - NVidia GeForce GT 130M (1GM VRAM)
? MotherBoard - Don't know
? Power Supply - 90W, brand unknown

? ASUSTek Laptop
? N90SV


Thank you again for this service. I look forward to your diagnosis.

A:BSOD: Driver Power State Failure

From the last 9, 3 are corrupt, 3 are inconclusive, and 3 name the USB hub driver.
Do you have anything plugged into a usb port?
Is there any memory card in the card reader?(it runs off the USB hub)

athrx.sys Mon Oct 5 12:33:57 2009
Atheros AR928X Wireless Network Adapter Driver, if there is nothing from 2012 on the Asus page for your model this is the best place I know of to get it >
ATHEROS drivers for Microsoft Windows (Atheros?????)

There appears to be a USB web cam set as disabled in device manager, was this done manually by you, or did Windows do it(because of a problem)?
USB 2.0 UVC 1.3M WebCam USB\VID_064E&PID_A116\CN1316-S30B-MI03-VS-R03.01.03 This device is disabled.

I'm also seeing older AVG drivers
avgldx64.sys Thu Jun 3 1748 2010 (4C081968)
avgmfx64.sys Wed Aug 17 07:31:52 2011 (4E4BA6A8)
avgrkx64.sys Wed Feb 10 22:52:44 2010 (4B737F0C)
And
a2ddax64.sys Thu May 19 08:09:43 2011 (4DD50887)
a2dix64.sys Wed Nov 2 05:10:36 2011 (4EB1090C)
a2util64.sys Fri Oct 16 06:26:21 2009 (4AD84A4D)
EMSISOFT/A-SQUARED MALWARE-IDS UTILITY DRIVER

Are you using both programs? Is either one up to date?

ghaio.sys Mon May 30 05:34:05 2005 Way too old for a Win7 driver> ASUS NB Probe program> Check the Asus site for an update.

These are Vista era Suyin USB 2.0 Webcam drivers
sncduvc.SYS Mon Jul 7 06:30:20 2008
snp2u... Read more

Read other 11 answers
RELEVANCY SCORE 98

Hi. Im having a problem with my computer. The last few days I have been having a new BSOD problem. I have been getting a driver power state failure for a while and I had it fixed but when I updated my graphics card drivers it started again and I cant figure out why. Any help would be much appreciated.

A:BSOD Driver Power State Failure

Welcome to the forum.

Based on the bugcheck, I would recommend you follow and complete the steps given below:





Quote:
1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to upload a screenshot o... Read more

Read other 1 answers
RELEVANCY SCORE 98

I've been getting a blue screen for the past week now every time my computer goes to sleep with the Driver Power State Failure message. I've done a lot of research and can see that this is likely due to a faulty driver that isn't updated, and since Windows Update has recently been doing a lot of updating I suspect this is the case. I just need to know which driver is causing the problem. More info:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8006B26060
BCP3: FFFFF80000B9C518
BCP4: FFFFFA80099CC970
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\101613-28048-01.dmp
C:\Users\Owner\AppData\Local\Temp\WER-207403-0.sysdata.xml

A:Driver Power State Failure BSOD

   Warning
Edit: Please follow Arc's instructions first
Welcome to the Forum.

Check for an update on the driver below:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800708fa10, fffff80000b9c518, fffffa8006ea7bd0}

Probably caused by : pci.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800708fa10, Physical Device Object of the stack
Arg3: fffff80000b9c518, nt!TRIAGE_9F_POWER on Win7, otherw... Read more

Read other 3 answers
RELEVANCY SCORE 98

Just recently I changed my computer over to a new case and a new motherboard, and it has just started BSoDing ><

I run a Core i7 960
Radeon HD 5870
Dual DVD burners
A kingston SSD
A 1tb redundant HD
A 1k W PSU
Dual 4GB DDR3 DSIMM
And a Rampage III Extreme Motherboard.

Any help would be appreciated.

A:BSoD Driver Power State Failure

Hi,

usbccgp.sys blamed for most of the BSODs.

However looking closer the problem appears to be related to AiCharger.sys - an Asus program named AiCharger (may also be a part of the Asus AISuite).

Uninstall that software suite and see if problems persist.

Regards,
Reventon

BUGCHECK SUMMARY
Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sat Aug 28 03:25:38.240 2010 (GMT+12)
System Uptime: 0 days 0:15:37.380
BugCheck 9F, {3, fffffa800b31aa00, fffff80000b9c518, fffffa800b21e480}
Probably caused by : usbccgp.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sat Aug 28 00:07:38.147 2010 (GMT+12)
System Uptime: 0 days 0:15:37.287
BugCheck 9F, {3, fffffa8009d09060, fffff80000b9c518, fffffa800c2bab80}
Probably caused by : usbccgp.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Aug 27 22:00:45.116 2010 (GMT+12)
System Uptime: 0 days 0:15:52.240
BugCheck 9F, {3, fffffa800adca240, fffff80000b9c518, fffffa800b6518d0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+29330 )
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
???????????????????????????????????????????????????????????????????????????... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hi I just recently got a BSOD on my laptop DRIVER_POWER_STATE_FAILURE. I'm also guessing this is the reason that my computer seems to not sleep consistently.

Thanks

A:Driver Power State Failure BSOD

Oh ya.

Update, uninstall or disable:

agrsm64 agrsm64.sys Mon Nov 10 10:01:35 2008 (49184CCF)

Update if an actual update exists:

ATSwpWDF ATSwpWDF.sys Thu Oct 11 05:14:13 2012 (50768DE5)

Install latest Intel Management Engine Interface driver from Intel.com to replace this driver:

HECIx64 HECIx64.sys Thu Sep 17 15:54:16 2009 (4AB293E8)

Update Intel Graphics driver:

igdkmd64 igdkmd64.sys Mon Nov 26 19:26:05 2012 (50B4089D)

Update, uninstall or disable for O2 Micro controller (card reader):

o2mdx64 o2mdx64.sys Wed May 13 01:38:57 2009 (4A0A5CF1)
o2sdx64 o2sdx64.sys Thu Jun 25 23:34:11 2009 (4A4441B3)

Update Synaptics Touchpad driver:

SynTP SynTP.sys Fri Oct 26 19:29:57 2012 (508B1CF5)

Read other 1 answers
RELEVANCY SCORE 98

Hi,

My laptop has been having the following issue:

Sometimes when I put my laptop into hibernate it experiences a blue screen of death and states that the problem is due to a driver power failure.

I have a:

Dell 1745
500GB HDD
4GB RAM
Intel Core2 Duo CPU P7450 @ 2.13GHz

Windows gives me the following information on the error:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8003C9D060
BCP3: FFFFF80004BA84D8
BCP4: FFFFFA80049AFB80
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Also find the attached dump file.

Thank you for any assistance.

A:BSOD Driver power state failure

Welcome Jack, please follow the Blue Screen of Death (BSOD) Posting Instructions .
The dump file uploaded is a 0x9F which is DRIVER POWER STATE FAILURE that happens in
transitions between power states most commonly S0 (ON state) > S3 (Sleep state)
or vice-verse. You can read more HERE.

The most common cause is a device driver but sometimes it's the hardware itself
that is at fault.


Code:
BugCheck 9F, {3, fffffa8003c9d060, fffff80004ba84d8, fffffa80049afb80}

Probably caused by : pci.sys ◄//Being falsely accused.

Code:
!irp fffffa80049afb80
Irp is active with 4 stacks 3 is current (= 0xfffffa80049afce0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa800766d050 00000000 fffff80002ecb200-fffffa80092ac010 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\netw5v64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for netw5v64.sys ◄//The actual culprit.
*** ERROR: Module load completed but symbols could not be loaded for netw5v64.sys
\Driver\netw5v64 nt!PopSystemIrpCompletion
Not surprisingly the driver is very very old!

Code:
lmvm netw5v64
start end module name
fffff880`0604a000 fffff880`06585000 netw5v64 T (no symbols)
Loaded symbol image ... Read more

Read other 8 answers
RELEVANCY SCORE 98

Hi all, I've been receiving a Driver Power State Failure BSOD after shutting down/restarting my machine since yesterday. I just installed the Windows 7 RC1 but noticed people have helped out with this BSOD error on these forums before. My shutdown is taking around 20 minutes before crashing with the BSOD. How do I find out what is causing the error and fix it? Should I post my minidump? Thanks.

A:Driver Power State Failure BSOD

Post the dump, it may point to a cause however the symbols for Seven aren't available yet, so it may also be inconclusive.

Read other 3 answers