Over 1 million tech questions and answers.

Safe Mode "Black Screen" and "Spyware detected" screen

Q: Safe Mode "Black Screen" and "Spyware detected" screen

I'm trying to fix my brother's computer after he opened a trojan attached to an email. The email was the one saying your credit card had been charged for airline tickets.

The computer is a Dell Dimension 3100 running Windows XP SP2.

The first problem is that after normal login there is a blue screen with a yellow window in the window with the message

"Warning! Spyware detected on your computer! Install an antivirus or spyware remover to clean your computer."

There are no icons visible. The only action I can perform is CTL-ALT-DEL to bring up the Windows Task Manager. I told my brother to start in Safe Mode from which he scanned the computer using AVG Free Edition which was installed before the infection. This did not fix the problem.

Starting Safe Mode I now get a black screen with Safe Mode in the corners and the operating system name at top. The blue login screen then comes up with Administrator and my brothers account. I click on Administrator and I get the same black screen as before with Safe Mode in the corners and the writing at top. My brothers account does the same. There are no icons or Start button visible.

Again, the only program I can bring up is the Windows Task Manager. Using that, I managed to install and run SmitfraudFix which was given as a solution to "Spyware detected" screen. After rebooting this did not fix the problem. I also installed SpyHunter 3.5.11 which found Zlob.Trojan, Rogue.AntivirusXP 2008 plus some other spyware cookies and files. These were removed from the computer.

Unfortunately, this did not remove the Start Mode black screen and "Spyware detected" screens. The only thing I can find to do next is a Windows XP repair using the Windows XP install CDROM. However, before I try that, is there anything else you could recommend to get rid of these screens?

RELEVANCY SCORE 200
Preferred Solution: Safe Mode "Black Screen" and "Spyware detected" screen

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Safe Mode "Black Screen" and "Spyware detected" screen

Anyone want to answer this?

Read other 1 answers
RELEVANCY SCORE 186.4

I'm trying to fix my brother's computer after he opened a trojan attached to an email. The email was the one saying your credit card had been charged for airline tickets.

The computer is a Dell Dimension 3100 running Windows XP SP2.

The first problem is that after normal login there is a blue screen with a yellow window in the window with the message

"Warning! Spyware detected on your computer! Install an antivirus or spyware remover to clean your computer."

There are no icons visible. The only action I can perform is CTL-ALT-DEL to bring up the Windows Task Manager. I told my brother to start in Safe Mode from which he scanned the computer using AVG Free Edition which was installed before the infection. This did not fix the problem.

Starting Safe Mode I now get a black screen with Safe Mode in the corners and the operating system name at top. The blue login screen then comes up with Administrator and my brothers account. I click on Administrator and I get the same black screen as before with Safe Mode in the corners and the writing at top. My brothers account does the same. There are no icons or Start button visible.

Again, the only program I can bring up is the Windows Task Manager. Using that, I managed to install and run SmitfraudFix which was given as a solution to "Spyware detected" screen. After rebooting this did not fix the problem. I also installed SpyHunter 3.5.11 which found Zlob.Trojan, Rogue.AntivirusXP 2008 plus some other ... Read more

A:Safe Mode Black & Login "Spyware detected" Screens

Hello etssp and welcome to TSF...
Since you have attacked by trojan better make a new thread to Security Center...
Also before you do anything, read this:

http://www.techsupportforum.com/secu...oval-help.html

Hope you will clean your PC...
Good luck...

Read other 3 answers
RELEVANCY SCORE 180

Hi.

I accidentally pulled the plug out of my computer when it was in the middle of shutting down. Now that I've tried to reboot it, I get a screen saying:

Safe Mode
Safe Mode With Networking
Safe Mode With Command Prompt
Last Known Good Configuration
Start Windows Normally

Whenever I click on any of the options above, I always ends up back at the same screen, suggest the above options again. I've tried rebooting I again a few times but nothing works?

Any ideas?
Thanks.
 

A:Stuck on "Safe Mode"/"Last Known Good Configuration" Screen

Read other 6 answers
RELEVANCY SCORE 165.2

Hey everyone,
        I am trying to get the REST queries to work with the sharepoint end points instead of graph end points. I first created an app with relevant permissions and have given it the admin consent. Then I am hitting the https://login.microsoftonline.com/<tenant>.onmicrosoft.com/oauth2/token?Content-Type=application/x-www-form-urlencoded end
point with https://<tenant>.sharepoint.com as resource. I am then using the access token retrieved to give the rest call to https://<tenant>.sharepoint.com/_api/v2.0/drives/b!3indYSbqZ0-hVSPnCgIZy-2xDMh7jH9AuQnEzJMc6TEfQoSJvJT-R6tT0lFBQiPr/root/delta
but it is failing with "error":{"code":"generalException","message":"General exception while processing"}}. The REST response code is 401 Unauthorized. I have filed a Microsoft support ticket but they
have asked me to post on these forms. Can someone please help me with this? I am not able to move forward because the error is pretty generic and doesn't give any additional details.
Thanks,
Sai Kiran Katuri.

Read other answers
RELEVANCY SCORE 160.4

Hi, I am having a problem with my newer computer, I just got this rig a few months ago and never had a problem until last Thursday. It Blue Screened on me while I was installing ARC GIS 10.1. From then on it randomly crashes. (I have previously installed ARC GIS 10 and never had a problem.)

I keep things updated (windows and drivers) and I do think windows forced through an update earlier that day. I un installed ARC GIS 10.1 and the windows update, didn't make any difference. I have also ran the Windows Mem test and Auslogic BoostSpeed/ Registry repair. I keep getting "Bad Pool Header" and "Page In Nonpage Area" and I can't seem to find something that triggers it. So far it hasn't crashed in Safe Mode without network access. I tried it once with access and it crashed. Currently have windows checking the drives for errors ( I have 4).

I think I attached the proper dump files. This is my work computer so this is kind of causing a big problem. Thanks in advanced for the help!!

A:BSOD "Bad Pool Header" and "Page In Nonpage Area" Runs in Safe Mode

Welcome aboard.

The crash dump you supplied, suggests the display driver failed there.

Code:
fffff880`0c995858 fffff880`10018000Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x980000
Go to Drivers - Download NVIDIA Drivers, follow option two to search for the appropriate driver for your system automatically, and install it.
Let us know how it worked.

Read other 3 answers
RELEVANCY SCORE 158.8

Yesterday my PC crashed and now I can only use it in Safe Mode. I have been through the Windows self repair program which has done nothing. The first time it happened, it allowed me to start from a system restore point, but then it crashed again and now doing a system restore doesn't even let me start up windows normally.

I looked in the "device manager" driver section and it has an exclamation mark next to the "Consumer IR Devices" in the "System Devices" section and It says: "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"
Further details:
"Driver Provider: Microsoft"
"Driver Version: 6.0.6001.18000"

I click on "check for solutions" it doesn't do anything, and I have tried uninstalling and restarting the computer, and also the "update driver" option but it says windows has determined it is up to date.

Does anyone have any solutions for this? I have been googling for a solution for hours and haven't came across any solutions, apart from that it could potentially be to do with video card/drivers or RAM.

Any help will be greatly appreciated.
 

A:Can only start PC in safe mode: "Consumer IR Devices" not working "code31"

BTW here is my basic system details:

Philips Freevents, (desktop PC)

Windows Vista, Home Premium, Service pack 2
Intel Core 2 Quad CPU Q6600 2.40 GHz
2 GB RAM
32 Bit

NVIDIA GeForce 8500 GT

Thanks.
 

Read other 2 answers
RELEVANCY SCORE 158.8

Yesterday my PC crashed and now I can only use it in Safe Mode. I have tried the self repair thing which has done nothing. The first time it happened, it allowed me to start from a system restore point, but then it crashed again and now doing a system restore doesn't even let me start up windows normally.

I looked in the "device manager" driver section and it has an exclamation mark next to the "Consumer IR Devices" in the "System Devices" section and It says: "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

I click on "check for solutions" it doesn't do anything, and I have tried uninstalling and restarting the computer, and also the "update driver" option but it says windows has determined it is up to date.

Does anyone have any solutions, this is soooooo frustrating!!!

Any help will be greatly appreciated.

A:Please help! can only start in safe mode: "Consumer IR Devices" not working "code31"

Welcome
Lets try to diagnose, go in with safe mode and set up clean boot. Does that worK
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
If yes follow instructions to find the problem
If no
Go in via safe mode find out the necessary information about the driver then go to the website to download to desktop. Then install.
Follow this tut to up date the driver
Device Manager - Install Driver
If it cannot be updated in this way, follow to step 7 and go to website and explained above.

If you unistall the driver, you can use automatic update.

I am not sure if that is your problem, however.
You may want to go in via, safe mode and set up a new account.
Download Security Essentials
and Malwarebytes and check for virus and malware. Do the full scan and update first.
If the new account does indeed work for you.

Read other 11 answers
RELEVANCY SCORE 158.8

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

Read other 14 answers
RELEVANCY SCORE 158.4

I have run webroot antivirus with antispyware, several times. Every time I do, it finds the same virus (sometimes others with similar names). This is from the latest scan:

Mal/EncPk-CZ
Troj/FakeAle-FK

and some cookies. However often I quarantine them, they reappear on the next scan and I also can't get the desktop to go back to its normal appearance, it's gone white with a big warning (as above) and refers to:

win32/adware.virtumonde
win32/privacyremover.M64

having been detected on my computer.

I have gone through the 5 steps.

This is the active scan log:

;***********************************************************************************************************************************************************************************
ANALYSIS: 2008-08-21 18:37:14
PROTECTIONS: 1
MALWARE: 13
SUSPECTS: 1
;***********************************************************************************************************************************************************************************
PROTECTIONS
Description Version Active Updated
;===================================================================================================================================================================================
Webroot AntiVirus with AntiSpyware 5.8.1.55 Yes Yes
;==============================================================================================... Read more

A:Can't get rid of "Troj/FakeAle-FK" and "Warning! Spyware detected on your Computer!"

Hi Henry


Disable SpySweeper's realtime protection. Open Spysweeper and click on Options
Choose Program Options and uncheck
load at windows
startup
.
On the left click
shields
and then uncheck everything.
Uncheck
home page shield
.
Uncheck
automatically restore default without notification
.
Exit the program.


Please visit this webpage for download links, and instructions for running ComboFix tool:

http://www.bleepingcomputer.com/comb...o-use-combofix

Please ensure you read this guide carefully and install the Recovery Console first.

The Windows Recovery Console will allow you to boot up into a special recovery (repair) mode. This allows us to more easily help you should your computer have a problem after an attempted removal of malware. It is a simple procedure that will only take a few moments of your time.

Once installed, you should see a blue screen prompt that says:

The Recovery Console was successfully installed.

Please continue as follows:
Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix, link
Remember to re-enable them afterwards.

Click Yes to allow ComboFix to continue scanning for malware.

When the tool is finished, it will produce a report for you.

Please include the following reports for further review, and so we may continue cleansing the system:

C:\ComboFix.txt
New HijackThis log.

A word of warning: Neither I nor sUBs are responsible for any... Read more

Read other 19 answers
RELEVANCY SCORE 158.4

Need , help to fix, My CA spyware won't get rid of it,

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 6:32:14 PM, on 7/22/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16674)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\Program Files\CA\SharedComponents\HIPSEngine\UmxCfg.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\Program Files\CA\SharedComponents\HIPSEngine\UmxFwHlp.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\CA\SharedComponents\HIPSEngine\UmxPol.exe
C:\Program Files\CA\SharedComponents\HIPSEngine\UmxAgent.exe
C:\Program Files\CA\CA Internet Security Suite\CA Anti-Virus\ISafe.exe
C:\WINDOWS\system32\CTSvcCDA.EXE
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\CA\SharedComponents\PPRT\bin\ITMRTSVC.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\CA\CA Internet Security Suite\CA Anti-Virus\VetMsg.exe
C:\WINDOWS\system32\MsPMSPSv.exe
C:\WINDOWS\system32\dllhost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\CA\CA Internet Security Suite\CA Personal Firewall\capfsem.exe
C:\Program Files\Dell\QuickSet\quickset.exe
C:\Program Files\CA\CA Internet Security Suite\cctray\cctray.exe
C:\Program Files\CA\CA Internet Securit... Read more

Read other answers
RELEVANCY SCORE 158.4

all of a sudden my screen went blue with a yellow box saying "warning spyware detected"
it has apparently happened to lots of people but there is no quick fix. can someone please talk me thru how to fix this

thanks in advance for any help

josh

A:Blue Screen with yellow box "Warning Spyware Detected" Please help

Get yourself a spyware removal tool - I think they have a forum here for that.

Read other 3 answers
RELEVANCY SCORE 158.4

I saw a few other posts for this problem and tried to cut and paste your solution but it did not work. Maybe there are minor differences I don't see... I am an amateur and need help. (please)

I thought I was downloading an update to Adobe Media Player and this started to happen.... my wallpaper is gone and replaced by a blue screen with a message telling me I have Spyware and it tries to send me to a site to buy software. McAfee did not get rid of it. I also tried Super Antispyware with no help.

Here is my Hijack This scan

Please help.

Thanks
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 11:46:19 PM, on 8/21/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\McAfee\MBK\MBackMonitor.exe
C:\PROGRA~1\McAfee\MSC\mcmscsvc.exe
c:\PROGRA~1\COMMON~1\mcafee\mna\mcnasvc.exe
c:\PROGRA~1\COMMON~1\mcafee\mcproxy\mcproxy.exe
C:\Program Files\McAfee\MPF\MPFSrv.exe
C:\Program Files\McAfee\MSK\MskSrver.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\Program Files\Common Files\New Boundary\PrismXL\PRISMXL.SYS
C:\Program Files\SiteAdvisor\6261\SAService.exe
C:\Program Files\Common Files\TiVo Shared\Beacon\TiVoBeacon.exe
C:\PROGRA~1\McAfee.com\Ag... Read more

A:Blue screen with "Spyware detected on your computer" message

I tried to follow some of your advice to other members and got rid of the lphcvkwj0eccr.exe

This seemed to work and I can control my wallpaper again. But here is another Hijackthis file... Did I miss anything? Thanks.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:35:24 AM, on 8/22/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\CyberLink\PowerDVD\PDVDServ.exe
C:\Program Files\Digital Media Reader\shwiconem.exe
C:\Program Files\HP\hpcoretech\hpcmpmgr.exe
C:\WINDOWS\system32\spool\drivers\w32x86\3\hpztsb10.exe
C:\Program Files\Hewlett-Packard\HP Software Update\HPWuSchd2.exe
C:\Program Files\Google\Google Talk\googletalk.exe
C:\Program Files\McAfee.com\Agent\mcagent.exe
C:\Program Files\SiteAdvisor\6261\SiteAdv.exe
C:\Program Files\McAfee\MBK\McAfeeDataBackup.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\Program Files\Adobe\Acrobat 7.0\Distillr\Acrotray.exe
C:\Program Files\Microsoft ActiveSync\WCESCOMM.EXE
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Common Files\TiVo Shared\Transfer\TiVoTransfer.exe
C:\Program Files\TiVo\Desktop\TiVoNotify.exe
C:\Progra... Read more

Read other 1 answers
RELEVANCY SCORE 157.2

Hello,

I've been having this nasty problem since yesterday. I have no knowledge of viruses whatsoever so I am at a complete loss as to what to do.

I'm using a 7-year-old laptop and Windows XP. At a guess, the problem comes from my friend's USB. This is what happened: I inserted the USB and noticed a RECYCLER and some Shorcut to (1) etc. viruses. I thought this wasn't serious so I ignored it. An hour or two after that my Internet connection crashed (I don't know if it has anything to do with the virus). By checking randomly, I found out that gpedit.msc and my Antivir setup file also refused to run.

I then shut down my computer and have been unable to boot ever since. Every time I try to start up, I am faced with a dozen of "out of memory" pop-ups, all of them with "xxx" in their title bar. I tried closing them all, but new ones kept springing up. I opened Task Manager and found at least 20 processes named FONTS.EXE. I guess this was what caused the "out of memory" error, so I tried to end those processes, but they kept re-appearing over and over again.

The taskbar and the desktop icons won't show up. The screen is blank - there's just my wallpaper background, my cursor and the nasty error pop-ups. I can't run any virus check or do anything else.

I've also tried rebooting in Safe Mode, but it took me to the blue screen of death.

Another problem, my laptop's CD driver is out of order (as I said... Read more

Read other answers
RELEVANCY SCORE 156.4

Hello All,

I just received a brand new computer a few days ago from CyberPower PC. I've attached the specs below.

That being said, I noticed a problem when I was "in a game" and within an hr, the fan revved up, and the computer shut down to black screen (monitor read "no input"). Thinking this was a one-off, I tried again, and the same symptoms persist - after playing for some time, the screen goes blank (no error messages), the fan rev's up, and requires a hard reboot. As an FYI, I paid Cyberpower to OC this computer for me. No error message whatsoever.

Next, during one of the "hard reboots", a message popped up before windows that said the setting were unstable, and that I had to reduce my clock speed down - so I clicked accept (there were no other options to potentially ignore this message).

Here are the steps I've taken to date:
1. Upgrade the MOBO / GPU drivers.
2. Plugged the system directly into the outlet to ensure adequate power (as opposed to power bar).
3. Ensured RAM and GPU was seated properly.
4. Ran MEMTEST - no issues.
5. Ran Prime 95 -> Torture Test -> Blend - Causes a "FATAL ERROR" every time as per below:

"FATAL ERROR: Rounding was 0.5, expected less than 0.4"
"Hardware failure detected - consult stress.txt file"
Torture Test Completed 181 Tests in 2 hrs 57 minutes - 1 error, 0 warnings" .

Each "worker" in this test (I'm assuming for each core) had a di... Read more

A:New Computer - "Black Screen" - Fan "Ramps Up"

Seems like a thermal shutdown to me. When CPU/GPU overheats, the system either reduces their clock in order to cool them down or does a hard shutdown to protect the hardware. You said you OCed your hardware. Make sure that your are running the CPU/GPU at stock clocks and not overcloking them and also make sure the cooling system is working properly (ie, the fans) and air is flowing good. Thanks for reading.

Read other 3 answers
RELEVANCY SCORE 156.4

Vista freezes with "pink screen," unless in safe mode. Problem persists after factory image recovery.

Windows Vista freezes with a "pink screen" and horizontal dashed lines. Sometimes after freezing, I'll get the BSOD and my PC will restart. The freezes used to happen about 3-5 minutes right after I logged in to my user account, but nothing happened up to about 5 hours yesterday.

Today, I wasn't even able to get past the login screen without freezing, so I went into safe mode, where I spent 2+ hours transferring the files I wanted onto a hard drive. My PC didn't freeze once. After I moved my files, I went and reformatted my windows partition of my hard disk drive with the HP factory image recovery.

But as soon as I finished that, before I could even set up my first account, my computer freezes (with the pink again). I tried going into safe mode, but it won't let me do that unless I have an account set up.

Help please! Thank you in advance.
 

A:Vista freezes with "pink screen," unless in safe mode. Problem persists after factory

Read other 9 answers
RELEVANCY SCORE 156.4

Hello, I have a bit of a problem here. Last night my roomate was using my computer and kicked my surge protector off. The result was my computer wouldnt boot up. I played with it for a couple of minutes turning it on and off. Finally I opened the case and blew any dust out and tightened a few connectors. Turned it back on again and it seemed to boot up normally. I logged into my account and the desktop started to load up. The icons began coming up and then it froze. Control + Alt +Del would not work. So I manually turned the computer off. I attempted to boot up again and this time when I typed in my password I got stuck on a "Loading Preferences" screen. I attempted turning the computer on and off a few times hoping XP was just having an XP moment. Not the case. Next I tried booting in various safe modes. Right now I'm in Safe Mode with Network and it works perfectly. I tried to restore to a last known setting, didn't help. I did it both via the list after hitting F8 and within safemode. I played around with some account settings and now have it so I don't have to type in a password when logging in.

I tried booting up again, and now I'm stuck on the "Windows Welcome" screen. Its terrible. I've done virus and adware scans. Nothing has helped. Right now I don't know what else to do. I'm not sure if I have the actual WinXP MCE CD. I have to search for it, but I'm fairly sure it did not ship out with the computer. Obvio... Read more

A:WinXP MCE '05: Stuck on "Windows Loading" Screen. Safe Mode works fine

Read other 12 answers
RELEVANCY SCORE 155.6

turned computer on and started up to black screen. On this page was computer error options restart from safe mode an so on. whatever mode i try to start it in nothin happens. Then after few seconds double white line appears on bottom of monitor. This fills white but takes time then reboots.
 

Read other answers
RELEVANCY SCORE 154.8

first of all, the problem we are having is not with the monitor, as we have just checked it and it works fine on another computer, so, that being said, here is our problem.

when we turn the computer on it begins to boot up, goes into the Windows welcome screen, then the screen flicks off (even shows the orange light like the monitor is not working) and it displays the message "burn in mode". This message is in a blue box and the rest of the screen is black.

If we turn the computer off and try again, the exact same thing happens.

sorry, I am not technical, so this was the best way I could describe what was happening.

hope someone can help
 

A:"burn in mode" on black monitor screen

Some motherboards have a "burn in" option. What is really happening is that the fsb [front side bus] is being overclocked by 5-10%

Have you tried to enter the bios and set defaults?

Has this always happened or was some hardware / software added or removed?

Is this a custom build or is it a mfg computer?
 

Read other 3 answers
RELEVANCY SCORE 154.8

I have read several threads with similar problems and it seems that the "blue screen" of old Windows crashes has been replaced with the "black screen of death". Anyway, I'm trying to get an older HP running. I get the Windows splash screen then the above described "black screen". I get this in "safe mode", also. I'm starting to lean towards the hard drive and will start trying to find out what brand it is and go to their web site and see if they have a utility program to check it. If anyone has any suggestions, they will be appreciated...

It's running Windows XP Home with 128mg of ram; just a basic box, nothing special...Thanks in advance, dm

A:Has the "black screen" replaced the "blue screen"?

greetings
do you have the xp disk available?
[128 meg ram for xp is a little light]
post back

Read other 12 answers
RELEVANCY SCORE 154.8

Hi, when entering the safe mode menu, I can't use my keyboard. I just have to wait the 30 seconds until it boots normally. As a matter of fact, pressing F8 doesn't seem to be able ot get me into the menu. I have to turn off the computer while booting so it goes there on next startup.

At first I thought it was because I used a wireless keyboard, but I tried it with a wired USB keyboard and it still doesn't work.

A:Can't use keyboard in "Safe Mode Screen"

It would be my feeling that if you are using a USB keyboard try a PS/2 keyoard.
Safe Mode loads fewer device drivers,
and USB wouldn't be supported.

Read other 3 answers
RELEVANCY SCORE 154.8

Hi there.

I've got a problem.

I thought that I had a virus on my computer, and therefore I installed a vcleaner, which told me to start my computer in "Safe Mode". I tried to do it with the F8 button during the start up, but every single time a blue screen was showing, and the computer restarted.
I searched on the internet to find another way to let the computer start in "Safe Mode". I found a way: to write "MSCONFIG" in "RUN". Then I could let the computer start up in "Safe Mode". Now I thought it would work, but it just got worse. Everytime I start my computer either in Safe Mode, Normally Mode or any of the other options you have in the "F8" menu it just do as when I chose "Safe Mode" before. A blue screen is showing, and the computer restart.
One of the buttons in the F8 menu make the screen stay so I can read what is on it. "A problem has been detected and windows has been shut down to prevent damage to your computer" is written and many other things. Also something with the letters CHKDSK/F, what does that mean??

Please tell me what to do, so that I can start my computer again.

- xJohan

Read other answers
RELEVANCY SCORE 153.2

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

Read other 16 answers
RELEVANCY SCORE 151.6

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

Read other 8 answers
RELEVANCY SCORE 150.8

I read all the responses to the exact question as mine as well as similar questions, none are applicable, as not even Safe Mode will load past black screen with "Safe Mode" in each corner, and at the top "Microsoft (R) Windows (R) (Build 7601:Service
Pack 1)". Thankfully, i had just recently backed up most of my files!  I want to get it working so I can wipe it clean and get rid of it. Please help, thanks!

Read other answers
RELEVANCY SCORE 150

Howdy everybody!
When I hit the Windows & Print Screen keys, it is supposed to generate a picture of my Desktop into a Folder, within Pictures, labelled “Screenshots.”
But there is no such "ScreenShots" folder there!
What should I do? If I simply create a new folder, and label it “Screenshots,” will do that do the trick?  Or is there a more complicated fix?
Your help would be appreciated. Thanks!

Read other answers
RELEVANCY SCORE 149.2

Howdy everybody! I have a new XPS 8910 with Windows 10.  When I hit the Windows & Print Screen keys, it is supposed to generate a picture of my Desktop into a Folder, within Pictures, labelled “Screenshots.” But there is no such "ScreenShots" folder there! What should I do? If I simply create a new folder, and label it “Screenshots,” will do that do the trick? Or is there a more complicated fix? Your help would be appreciated. Thanks!

A:No "ScreenShots" Folder in Pictures To Hold " Print Screen" Images!

Is it just saving the screenshots somewhere else or is it just not taking screenshots at all? Don't know about your specific system, but on my Win 10 lappy, the screen blinks (dims) when the screenshot is taken.  
Did you look in all the subfolders in Pictures to see if Screenshots folder is buried in one of them?
Win 10 also has a Snipping Tool which will allow you to put a box around the part of the screen you want to capture and then you can save it wherever you want. Maybe that's easier, and you can pin the Snipping Tool to the Start menu so it's easy to find.

Read other 1 answers
RELEVANCY SCORE 147.6

So got windows 8 Dev installed so far so good, I thought I would like the left screen bump to go to last app or program used feature till I installed some games and tried to play them suddenly my left side of my screen is no good if needing to scroll to the side say in a game like Starcraft II, Civilization, ect. Anyone know how to disable it?

A:Disabling the left screen "Bump" or "quick switch"

I want to know how to activate it, sometimes my quick switch is unavailable

Read other 7 answers
RELEVANCY SCORE 145.2

Hey guys.
Can you pleas explain me what does Hardware Acceleration means and why is that when it is turned on, it causes a green screen on the video (with audio working).
It happened to me once in YouTube, where I had to go in to settings and unpick the "Enable Hardware Acceleration", then it worked!
And 2nd time similar thing happened in Cyberlink PowerDirector 10, when I imported .mp4 and flv video files and it showed me green screen with audio. After unpicking "Enable Hardware Decoding " it was fixed.
My Sony VAIO has:
CPU - Intel Core i5 M430 2.27GHz
RAM - 4GB
GPU - AMD Radeon HD 6500M/5600/5700
Does this mean that I have a problem with my hardware, or maybe I need to set up something??? to ba able to use Hardware Acceleration. As I understand I should be able to use it!!??

Thank you
Have a nice day

A:Enabled "Hardware Acceleration" causes "green screen"

I don't know what the problem is but the only time I had this issue is when I installed a VM and get black screen on youtube so I had to enable that.

Read other 6 answers
RELEVANCY SCORE 145.2

These are in Firefox. I'd like to turn off all of these dumbo messages. If you know how, please let me know how too.

Thanks,
Burt

A:How do I turn off "Share Location," "Allow Full screen,"

Follow this guide from Mozilla support: https://Permissions Manager - Give certain websites the ability to store passwords, set cookies and more | support.mozilla.org
You can set individual web sites or you can do like I did and follow the second part of the guide and set for "all sites". You'll see the settings to ask or block either request to the right.

For further exploration try typing about:about into the address bar, be careful using the resulting page, all the links are mozilla/firefox related; Some of the links are benign, and others can get you into trouble.

Read other 1 answers
RELEVANCY SCORE 144.8

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

Read other 1 answers
RELEVANCY SCORE 144.4

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Read other 6 answers
RELEVANCY SCORE 144.4

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

Read other answers
RELEVANCY SCORE 143.6

I am trying to use the fsutil file setshortname to set "Program Files" to PROGRA~1,

but the system is giving me an "Error: Access is denied" response.
what I have typed:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd /d D:\
D:\>fsutil.exe 8dot3name set 0
The registry state is now: 0 (Enable 8dot3 name creation on all volumes).
D:\>fsutil file setshortname "Program Files" PROGRA~1
Error:  Access is denied.
And I try it in Safe Mode.It is also "Access is denied.".
Can someone
help me?

A:"fsutil file setshortname "Program Files" PROGRA~1"=>"Error:Access is denied."

Hi TimFF,
This might be related with the UAC settings, check this thread:
give full permission for the users in program
files folder
The steps in the above thread is not recommended.
For the short name usage, we may consider to create a directory-junction from
PROGRA~1 to C:\Program Files:
With the following commands:
mklink /J "C:\PROGRA~1" "C:\Program Files"
Reference:
Mklink
Best regards


Michael Shao
TechNet Community Support

Read other 3 answers
RELEVANCY SCORE 143.2

I am on a Windows 7 Professional SP1 system, running IE 11 (11.0.9600.19230C0, update version 11.0.101 (4483187).


When I have Internet explorer opened in "kiosk mode" on one monitor and I open a hyperlink from the other monitor it will open the link in a new IE window (non-full screen) .    If I do the same test with IE not in "kiosk mode"
the hyper link will open in the open window/tab. 

I have Internet Options -- Tab settings "Open links from other programs in"  set to "the current tab or window".  

Any ideas would be appreciated.
Thanks - Tim Reisner

Read other answers
RELEVANCY SCORE 142.8

Hello everyone,

First of all, I will divide my statement by sections so it would be easier to read.

Section 1: The problem - description of it.
Section 2: How I manage the problem.
Section 3: Things and methods that I have tried - all unsuccessfully.
Section 4: My own findings to help with further analysis.

So here we go

Section 1

Whenever I start windows it will boot normally up until Windows logo screen(where 4 balls meet to form windows 7 logo) at this logo screen I can already notice slow pace as it stays in it for a good minute. Afterwards it will be just black screen for a minute. Then mouse cursor will appear(with faster sensitivity than my usual) and it will transform into a loading wheel cursor after another minute. And now it reached state in which it can stay for hours. Only black screen and loading mouse wheel(note that it is always spinning and I can always move it, it is not frozen).

Section 2

So the only way for me to login is to leave it be for at least about 5 hours and it will start itself. Usually I do this overnight and in the morning it is already at the desktop and works like nothing ever happened. I can do whatever then, everything will work perfectly fine. Crysys 3 works fine, YouTube works fine - no trace of any problem. So while I can always just Hibernate and sleep my PC, I need to restart it sometimes.

EDIT: Now after those 5 hours or more, it will simply display ordinary mouse pointer on a black screen and act as if I am in login screen. F... Read more

A:Black screen with "loading cursor" and no login screen on Boot.

It sounds like something is trying to load and run in the background.
Download DDS from one of these links:
DDS.com
DDS.pifDisable any script blocking protection
Double click the dds icon to run the tool.
When done, DDS will open two (2) logs: DDS.txt
Attach.txt <--- will be minimized in the task tray

Save both reports to your desktop.
Include the contents of both logs in your next post.
The scan will instruct you to post Attach.txt as an attachment. You can post both logs as attachments.

Read other 9 answers
RELEVANCY SCORE 142.8

Hi all

Ill cut to the chase.

What I am asking is someway of turning the Entire Windows Desktop/Screen "Black and White" not simply High Contrast.

I am one of those unfortunate ones, like many, that suffer from quite severe migraines from time to time. Couple this with frequent headaches, sometimes daily. This obviously isnt helped by the fact that my hobby and career are both in IT. I have tried every possible solution to alleviate the headaches. Lay off certain foods, make sure to have a balanced diet. Turn off any strong lighting around my computer screen, remove any strong colours from the desktop etc......

Windows XP / Vista have tried to address this issue with the accessibility wizard, where you can select the High Contrast Options to take any strong colours off the screen. Unfortunately this still doesnt get rid of everything.

When you make any major changes or "logoff" in XP/Vista, the screen fades to "black and white" for a short period. If you know what I am on about, thats the effect I am after.

More than likely a black and white layer is laid over the desktop to create this effect, unfortunately you would not be able to access anything underneath.

I need a fully functional XP machine in complete black and white.

On old CRT monitors you were able to remove the colour, making the screen B&W, but with alot of LCD screens this function is not available.

If anyone has any ideas, you would be helping so many people.

Any assist... Read more

A:Turning the Windows Desktop completely "Black and White" not just "High Contrast"

Read other 9 answers
RELEVANCY SCORE 142.8

It seems that no matter how I set this, after the next start-up it reverts to "15 minutes".  What registry key controls this?

Read other answers
RELEVANCY SCORE 142.8

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

Read other 6 answers
RELEVANCY SCORE 142.8

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

Read other 12 answers
RELEVANCY SCORE 142.4

I've been having some problems with my computer and I've always somehow managed to work my way around the issues spyware/malware etc. have created but lately it's been getting out of hand.. Some time ago I got a virus or something that made the entire tab under "Processes" dissapear. So I could not see process-names in the task-manager. I have re-installed XP but this problem persists. I have been using a different application to monitor and handle processes.

The problem now is the constant pop-ups generated from this fake anti-virus program calling itself "Anti Virus Pro 2007" or something.. It pops up with fake commercials, and even attach itself into other explorer-windows while I view other pages.

As popups and messageboxes keep popping up, I close them, but after a while windows will open a messagebox telling me "Buffer overrun detected in e:\Windows\system32\explorer.exe" (or \\windows\explorer.exe I don't remember really but you get the idea) and explorer.exe will be terminated, sometimes taking some internet explorer windows along with it, other times explorer.exe just starts up again and all my windows remain.

I used to have Norton but was forced to remove it as it was sucking up all my CPU. It rendered my computer useless, as I mainly use it for gaming.

I've also experienced having the connection between me and my modem broken while beeing on the internet, and I don't know if my computer actually is offline or if -I'm- just... Read more

A:Infected - "Win Anti Spyware" "Buffer overrun error" and a fake dialer or something++

Hello and welcome to TSF

Please download ComboFix

Note: It is important that it is saved directly to your desktop.

Close all browsers. Double click combofix.exe & follow the prompts.
When finished, it will produce a log for you. Post that log in your next reply.
Note: Do not mouseclick combofix's window while it's running. That may cause it to stall.

You are using an older version of HijackThis. Please do the following to download and install the latest version of HijackThis v2.0.2:

CLICK HERE to download the HijackThis Installer:Save HJTInstall.exe to your desktop.
Double-click on HJTInstall.exe to run the program.
By default it will install to C:\Program Files\Trend Micro\HijackThis.
Accept the license agreement by clicking the "I Accept" button.
Click on the "Do a system scan and save a log file" button. It will scan and then ask you to save the log.
Click "Save log" to save the log file and then the log will open in Notepad.
Click on "Edit -> Select All" then click on "Edit -> Copy" to copy the entire contents of the log.
Come back here to this thread and paste the log in your next reply.
Do NOT have HijackThis fix anything yet! Most of what it finds will be harmless or even required.

You may delete the older version once you have successfully downloaded and installed the latest version of HijackThis v2.0.2.

Expected logs:

Combofix.txt
HijackThis log

Read other 19 answers
RELEVANCY SCORE 141.6

Hi and THANKS for being there! This is primarily a term definition question. I don't find any clear answer in my user's guide.

I've got this terrific TV card installed, very fancy, very feature-rich.

I've got this terrific add-on AGP card installed, very fancy, very feature-rich. But I'm thinking that's beside the point. (It's a nVidia Geforce FX 5200)

This TV Tuner/Capture card dates back a ways; bought it for my old Windows Millennium machine and I remember that it worked just GREAT. It has the brand name "Brooktree" but that might just be the chipset or something. Anyway, I abandoned the TV add-on when I upgraded to a newer Windows XP machine in early 2007. I couldn't find the right driver though it worked pretty fairly with the old driver for most TV stations, it didn't work perfectly. I ditched it at the time.

I recently visited driverguide.com and searched diligently and finally did find a perfect driver for that TV card for XP. I am sure it is the latest and best driver available, so that is not even an issue.

Since I no longer subscribe to cable, I can use this old card to watch only channel 3, as output by my VCR. (The card also has FM radio, which works great!)

Here's the thing. A very itty-bitty teensy slight snag. When I initiate the TV Tuner, it always starts up in what they call "Preview mode". There is sound but no picture! No problem, I just tell it to go into the alternate mode, "... Read more

A:Solved: TV card: explain what is "Overlay" versus "Preview" mode

Read other 6 answers
RELEVANCY SCORE 141.6

I got a new computer and am trying to use Ghost 2003 to clone my hard drive. I have tried using a LPT cable, CDr's and DVDR'. It tells me that the clone has been successful, but when I reboot it I get a blue screen that says "A problem has been detected and Windows has been shut down to prevent damage to your computer".

At the bottom it says" Technical Information Stop:0x0000007b" along with a bunch of other similar numbers.

This is driving me nuts, can someone please help?

I did a search, but did not really find anything that matched my problem.

Thanks!
 

A:Ghost clone leads to a blue "problem has been detected..." screen in XP

Look at these links for help.
http://support.microsoft.com/default.aspx?scid=kb;en-us;324103
http://support.microsoft.com/default.aspx?scid=kb;en-us;316401
http://support.microsoft.com/default.aspx?scid=kb;en-us;122926
 

Read other 2 answers
RELEVANCY SCORE 141.2

Hi everyone.
All my experience is with XP, but my partners windows 7 laptop has this problem and I am stuck. it is a Dell laptop latitude E4300 about 4G ram, no external devices fitted.

Laptop starts to boot, I log in, "welcome" screen comes up but never finishes processing. Harddrive light keeps on pumping endlessly.
I tried to boot in "safe mode" and it stops at exactly the same spot.
I tried to run ?System restore?: I can pick a restore point OK, and it loads it but then gets stuck on ?finishing restore? (similar to the ?welcome screen? thing - it just keeps on processing )
?Start up repair? both from harddrive or dvd both say it cant find anything wrong.
Ran the command prompt. ?Sfc /scannow? it runs ?beginning verification phase of system scan? ? it gets to ?Verification 100%? then displays the line : ?windows resource protection could not perform the requested operation?
Any ideas of where I can go from here? all Ideas welcomed greatfully - she might expire without her laptop

A:stuck on "welcome" screen cant get "sfc /scannow" to work

Welcome to Windows Seven Forums.

Have a look at this Microsoft article: How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

When the system file checker runs it creates a log file, which should help you pinpoint which file couldn't be repaired.

However, if you can't get into Windows you might want to check this tutorial: Startup Repair Infinite Loop Recovery

Did your partner create a set of Dell recovery discs or does she have a Windows 7 DVD?

If all else fails, you may have to re-install Windows.

Read other 9 answers
RELEVANCY SCORE 141.2

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

Read other 2 answers
RELEVANCY SCORE 140.8

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

Read other 9 answers
RELEVANCY SCORE 140.8

Hello,
I have just had some heating problems with my graphics card and I found out it's fan was out, so I removed it and pugged my screen into the onboard VGA.
After fixing the graphics card I placed it back into the PCI slot and connected my screen cable to it and when I turned on my PC everything worked fine until somehow the screen blacked out after a minute and told me there's no signal, after shutting down my PC and turining it back on the screen doesn't turns on, and only if I unplug the power I get the same problem.

When the cable is in the onboard VGA it works fine but when I put the graphics card I get that problem, I think the card works fine because the fan on it is on.

How can I fix this?

Thanks
 

A:After a minute my screen blacks out and says "no signal detected"?

Read other 7 answers