Over 1 million tech questions and answers.

Solved: new maxtor 200 GB hard drive ..?

Q: Solved: new maxtor 200 GB hard drive ..?

i have just installed a new maxtor HD . and it isnt viewable in my computer .. but i do see it in the device manager , i have tried all three settings . master cable select and slave . none of the setting would allow me to see the HD in my computer .. but asi say . i can see it in the device manager ..
would like to get this space available . any thoughts or sugestion ??
cheers

RELEVANCY SCORE 200
Preferred Solution: Solved: new maxtor 200 GB hard drive ..?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Solved: new maxtor 200 GB hard drive ..?

Read other 13 answers
RELEVANCY SCORE 73.2
A:Solved: Maxtor Hard Drive

Read other 8 answers
RELEVANCY SCORE 73.2

I am having an issue with a Maxtor Model Number 92739U6 hard drive. I have just finished formatting and installing windows xp home edition. Everything was going ok until I restarted the computer.

First right after I restarted the computer I got an error message A Disk Read Error Occurred. Press CTRL+ALT+Del.

I was unsure what caused this error message so I started to research this issue on Maxtor’s website and they advised me to use fdisk /mbr to repair the error. I did that and restarted the computer.

Same Error….

The thing I can’t figure out is why I am able to boot right to windows using a boot disk.

Can anyone tell me what I should do next?

What would I have to get windows to load without a boot disk?
 

A:Solved: Maxtor Hard Drive

Read other 10 answers
RELEVANCY SCORE 72.4

Thats the message Powermax is giving me. Can this drive be fixed? Can I do it? Any programs available. It's a relatively new hard drive.
 

A:Solved: Maxtor hard drive failing

Read other 16 answers
RELEVANCY SCORE 72.4

Hello,
How do I format my hard drive, and create a boot disk so that I can clean out my old hard drive and then reinstall Win98 plus my device drivers? I have a new MSI 845 Ultra -AR motherboard with Pentium 4 and I am in the process of completing my building of a new PC. I still am using my old 10.2 Gbyte Maxtor hard drive from my previous Gateway PC but I want to clean it out and then re-install Win98 plus my device drivers. Thanks for all of your help in advance.
 

A:Solved: Formating my Maxtor Hard Drive...

For boot disk, go to Add/Remove Programs > Startup Disk. To format HD, boot using boot disk and use the command

Code:
format c:
.

Make sure you save all of your drivers and files you need on a CD or different partition before continuing.
 

Read other 2 answers
RELEVANCY SCORE 72.4

I have a Maxtor one touch ext. hard drive that I let my DVR format so I could save some movies I recorded. Now that I don't need the movies any longer, I wanted to use it for backing up computer files but the DVR format must have removed the original software that was put on it to make it function so now my computer won't recognize it as a hard drive. It tells me that the drivers are loaded but I cant access it. I have been to the Seagate sites and can only find drivers to download but I can't find copies of the setup software that originally came with it. It was given to me by a friend that also no longer has the software. Does anyone have any idea where I could find this software?
 

A:Solved: Maxtor one touch ext. hard drive

Read other 16 answers
RELEVANCY SCORE 71.6

I have a Maxtor D740X-6L 40gb drive but there are no details marked on the drive casing for me to enter into the BIOS. The BIOS shows most items as AUTO and everything works OK but I need to enter the drive details into the BIOS because when I use Acronis TI7 I cannot make a drive restore when using the TI startup disk as it says it cannot find any hard drives. (When I exit TI the PC starts normally).

I figured that if I fed the drive details into the BIOS instead of AUTO it might enable TI to 'see' the hard drive at TI startup.

I have Googled the drive but I cannot find the relevant details as required by the BIOS; namely -

cylinders
head
sector
CHS capacity
Maximum LBA capacity
(although I think the last two might be automatic, currently shown as 0mb)

Usually this kind of information is marked on the drive itself but not in this case.

Can anybody advise, please?

johnni
 

A:Solved: Maxtor hard drive details required

Read other 10 answers
RELEVANCY SCORE 71.6

I have an old 40 gig Maxtor hard drive, and it doesn't show any jumper settings on it. The hard drive died and I have some data on it I would like to attempt to recover. I need to figure out how to set it to a slave before I can do that, does anyone know how to set this thing as a slave?

If you need any additional info, I'll try my best.
 

A:Solved: Jumper settings on my old Maxtor hard drive.

Read other 16 answers
RELEVANCY SCORE 70.8

I have a maxtor hard drive SATA 200GB as my main drive and a second drive D.
Very recently when I have noticed that my computer took longer to boot into windows. Applications seem to take a bit longer than usual to load.
I have XP SP2 installed. I defragment my drive every few weeks so its not a defragment problem however when I try to defrag it now, it takes many times longer to do so.
Also for a scan disk of C: (chkdsk on boot) it took 6 hours to get to about 25%. So there must be a problem. I can hear the hard drive loading sound for a few seconds and then there is a very long pause maybe about 10-20 minutes. It should only take a few hours the last time i did it maybe about 5 hours. Something is wrong.

When I transfer a large file like 1gb into my drive D it takes 15 minutes. Which is a bit long for a SATA enabled hard drive. I have had this drive for about 2 years now and it has never gone this slow before.

I have downloaded the seatools from the maxtor website which diagnoses the drive. The tool ran slow but my hard drive passed the tests.

Also when I ran that scan disk, it did say there was a mirror copy of something and also some other things. I think it had the word security in it so it deleted somethings. It mentioned indexes and some files.
I forgot most of it.

I have checked my D drive and it is running fine and unaffected.
Also I noticed during bootup that on the windows logo screen, the one with the bar moving from left to right that it freezes for about 5 ... Read more

A:Solved: Maxtor SATA hard drive slow all of a sudden

Read other 7 answers
RELEVANCY SCORE 70.8

Help please i have a maxtor 500gb external hard drive that i store all my music on. i was quite happy listening to some when all of a sudden it stopped checked in my computer and the hard drive wasn't listed as being connected. so i presumed it had become unplugged somehow, checked all connections from drive to laptop and they were solid, but it came apparent that the green power light was not on checked the plug and it was still plugged in and when i pull cable out of drive and try plugging it back in the light comes on for a short period of time (1-2 seconds) then goes back out again.
Now i have over 40,000 tracks stored on there 90% are backed up but is this a fault with the drive itself or the power supply unit??
 

A:Solved: Maxtor 500gb external hard drive issue

Read other 10 answers
RELEVANCY SCORE 70.8

Does anyone know how to tone down the acoustics of this hard drive, while it is seeking it makes an annoying clicking noise.

I dont think it is a prob with this particular drive, Just a common problem with this model of drive.

I have tried amset, this only finds the ide drive and not the sata.

Any ideas?
 

A:Solved: Noisy Maxtor 6l250so Sata Hard Drive

Read other 8 answers
RELEVANCY SCORE 64

xp cannot find it.......disk manager can.....do format and no drive letter help please.....thank you


#1 (permalink)
robtonet
Registered User


Join Date: Apr 2008
Posts: 1
OS: xp


help trying to initialize an external hard drive on xp home ed

--------------------------------------------------------------------------------

i may not know enough about the problem to completly describe it...but i will begin......an 80 gig external hard drive was given to me..it was rebuilt on a win 2000 system....my home edition of win xp--reconginzes it....as disk 1- in disk manager....however it is not formatted or able to be found, and does not have a drive letter assigend to it... i logged on as "administrator" ...in safe mode, to see if i could get the drive path settings option to come up in disk manager ...i could not-------does any of this make any sense to anyone?.......that option still does not come up..under user or administrator...in disk managment--so it is unformatted and has no drive letter......thus xp cannot find it......

OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 2 Build 2600
OS Manufacturer Microsoft Corporation
System Name System Manufacturer Dell Inc.
System Model ME051
System Type X86-based PC
Processor x86 Family 6 Model 13 Stepping 8 GenuineIntel ~1396 Mhz
BIOS Version/Date Dell Inc. A04, 12/22/2005
SMBIOS Version 2.3
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot ... Read more

A:maxtor external hard drive unformatted and undesignated by drive letter

What size is the hard drive?

Do you know what motherboard you have?

STEP 1: CHECK POWER (click for expanded instructions further down the page)


Verify that the drive light and the light on the AC adapter (power supply) is illuminated normally.
It is sometimes necessary to contact Technical Support for troubleshooting and/or possibly to replace the power supply if it behaves unusually.





STEP 2: CHECK CABLING (click for expanded instructions further down the page)



Confirm that your USB/Firewire cable is firmly connected in a port that is on the rear of your desktop computer (if you have a desktop).
Try another USB or Firewire port.
If your drive is powered only by USB, such as the FreeAgent Go, the Maxtor OneTouch mini, and the Seagate Portable drive, then the drive's cable has two USB connectors. Try connecting both of the free USB connectors into a USB port for maximum power availability.
Avoid connecting the drive via a USB hub for now.



STEP 3: WINDOWS SERVICE PACKS


Follow these instructions to ensure that your installation of Windows XP/2000 has been updated to the latest Windows Service Pack.

Right-click on My Computer and choose Properties.

The System Properties window will appear. On the General tab (which will be at the front), see the "System:" information.

For Windows 2000: Update to Service Pack 4.

For Windows XP: Update to Service Pack 2.

Allow your computer to complete the installation ... Read more

Read other 13 answers
RELEVANCY SCORE 63.6

My maxtor 200g hd is acting funny. when i open my computer to look at the contents it only lists the items on the drive through the letter "c". I ran the error check and get an error after phase 2 "windows cannot complete". The drive is NTFS and two partions E 39g and G 150g. G is the only part that is having the difficulty. E works fine. This is not my primary drive so my computer still operates. I also moved some files off of G without trouble and for some got a cyclical redundancy check error and the file would not move?
Running XP Pro.

Any ideas or help will be great.
 

A:Maxtor hard drive

Read other 10 answers
RELEVANCY SCORE 63.6

I have a Maxtor hard drive (S/N L632X08G) that I am using as an external on my PC. It worked fine for about 8 months and then recently I purchased a MacBook and wanted to switch over my files. The first time I plugged it in via USB, it showed up and I imported my music collection of 80gb into iTunes but the files remained on the hard drive. I moved my setup into a different room and ever since then the hard drive will not show up. A few times I have gotten an error along the the lines of "Mac OSX cannot read disk blah blah" with the choices to Initialize and something else. But 9/10 times it won't show up in disk utility. I have tried to reconnect it to my PC but it doesn't show up there either. Help me please
 

A:Maxtor Hard Drive Help

Read other 7 answers
RELEVANCY SCORE 63.6

Good morning 1st time user.. my ? Is I have a Maxtor Hard Drive when I install it it makes my computer not turn on at all this is a second time I tried to install a Maxtor drive... w two different drives 1st drive Maxtor SATA & 2nd Drive a IDE DRIVE DiamondMax 10... please advise on what to do...
 

A:Maxtor Hard Drive

Hello jessdawg67, and welcome to TSG.

Please tell us the names of the manufacturers and the full model numbers of your computer's motherboard and power supply unit. Also please tell us the full model numbers of the two Maxtor drives.

Are you trying to install the new hard drive as a secondary drive or as a replacement for the current system drive?

When you say "not turn on at all", does that mean that the case and CPU fans never even start to spin when you try to power up the computer?
 

Read other 1 answers
RELEVANCY SCORE 63.6

I just bought a Maxtor 300 gig hard drive, but when I insert my bootable Windows XP (no SP2) CD, it only recongized 140 gigs when I tried to create a partition.

My motherboard is ASUS P5LD2, and my BIOS is up to date.
How can I use all the hard dive space when I create partition during Windows installtion?

Thank you in advance.
 

A:Maxtor 300 GB Hard Drive

Read other 8 answers
RELEVANCY SCORE 62.8

Hi,My Maxtor 160GB sata hardrive three months old has become noticeably noisy i checked to see if it was the CPU fan by disconnecting the hardrive and it disappeared.When the red light flickers the noise coincides with the light,the noise is like a squeaky sound,is this normal.Regards Martin.
 

A:Maxtor hard drive noisy

No, I would say it's not normal. But you knew that already or you wouldn't be here. I would backup any important data and replace the drive. If it's only three months old, it should still be under warranty.
 

Read other 2 answers
RELEVANCY SCORE 62.8

It seems I'm not 100% out of the woods just yet. I had a plethora of issues earlier that led to me having to do a recovery/windows reinstall on my computer recently. You can read all about that at this thread: http://www.techspot.com/vb/showthread.php?p=336176#post336176.

I am now having a strange issue since recovering the computer where it seems that everytime I try to open my G drive, the 160 GB Maxtor hard drive, it freezes up on me. In total I have 4 hard drives on this machine. 2 40 GB drives, 1 160 GB drive and 1 200 GB drive. They are set with a Promise/Raid configuration as per my motherboard...an Asus P4C 800 Deluxe.

The window that would be showing the contents of the drive will freeze up when I try to explore the contents of the drive through "my computer" and my mouse pointer will intermittetly freeze on the screen several times. I have to try using ctrl+alt+delete to shut it down but most of the time have to hit the reset button on the computer. I sure hope this 160 GB drive isn't trying to fail on me. I've also noticed that when I double click on shortcuts on my desktop that point to programs on that drive also cause this weird freezing issue. This all seemed to start after me recovering the system. The only 2 things I did differently when recovering than what I normally do is that I installed the Promise/Raid configuration AFTER recovery and I changed the defualt file system on the 40 GB drive that is home to windows and n... Read more

A:Problems with 160 GB Maxtor Hard drive

Your systems power supply is probably working beyond it's max output, and is dieing. The 160GB + hard drives get very hot. Heat = lots of current draw. I aso have 4 hard drives, a CD/DVD burner and a DVD ROM. I have a 80GB, 60GB and 2 40GB drives in a Antec server case full tower, with an Antec 350 Watt power supply... The system is over 1 year old
 

Read other 34 answers
RELEVANCY SCORE 62.8

Hello,

I have a Maxtor 500 gig Hard drive. I got it a while back as a gift and never had a chance to use it until I got an external case for it. However, when I first started the HDD up, my computer only registered a 150 gig hard drive. I thought that was odd, so I tried to reformat it, but I kept on getting only 150. I tried atleast 3 different external cases and they all gave me the same result.

Does anyone know how to fix this or have anything that I can try to see what's wrong with my Hard drive?

Thanks.
 

A:500 Gig Maxtor Hard Drive shows up as 150 gig

Read other 16 answers
RELEVANCY SCORE 62.8

Hey,

My friend gave me his Maxtor Basics 250gb Hard Drive (Part # 9NX2DG-500) to put some of the songs i have made on. I connected it to my pc and it doesn't recognise it at all, so i restarted and still the same thing happens. I'm not sure if it requires any drivers or if i have to edit anything in the BIOS.

Someone please advise me on what to do.

Thanks
 

A:Maxtor Hard Drive not recognising

Read other 7 answers
RELEVANCY SCORE 62.8

I removed the harddrive from my other XP Pro tower, its a Maxtor 100 gb PATA 133 HDD & would like to know how to hook it up to the tower I'm on now to possible remove some tunes & pictures.
Picture attached
 

A:Checking out a Maxtor hard drive

Well, you do the opposite of what you did on the XP tower.

1. Secure the the HDD in the HDD bay.
2. Connect the power and IDE cables to the HDD
3. Power up your PC and check the BIOS to see if your HDD is being detected.

BUT FIRST, you might want to check the jumper setting on the Maxtor, to make it a Slave drive.

If the HDD was the only (or primary) drive in the XP tower, chances are it is configured as the Master drive, which will of course cause a conflict in your current tower.

this guide shows the jumper settings for your HDD:

http://www.seagate.com/staticfiles/maxtor/en_us/documentation/manuals/diamondmax_10_product_manual_pata.pdf
@mods: Had to double post because of the link-post count restriction.
 

Read other 9 answers
RELEVANCY SCORE 62.8

I recently bought a (180gb) external MAXTOR hardrive. It was connected via FIREWIRE.
Well it was working fine formatted as NTFS. But all of a sudden I go to access it and it cannot be recognized...and it looks like the file format is RAW.

I have know clue what happened.
I have some criticle data on it that I need. my last resort is one of those recovery services.

But isn't there a tool or something I can repair so I can atlease get the data off?

Any Ideas?
Thanks
Ken
 

A:Help recovering MAXTOR hard drive

I've used this before, and it seems to work fine..

http://www.ontrack.com/

Easy Recovery Pro

Has a trial that allows you to see files that have been deleted - so you know if it can get your files back. Good luck!
 

Read other 1 answers
RELEVANCY SCORE 62.8

I am having an issue with a Maxtor Model Number 92739U6 hard drive. I have just finished formatting and installing windows xp home edition. Everything was going ok until I restarted the computer.

First right after I restarted the computer I got an error message A Disk Read Error Occurred. Press CTRL+ALT+Del.

I was unsure what caused this error message so I started to research this issue on Maxtor?s website and they advised me to use fdisk /mbr to repair the error. I did that and restarted the computer.

Same Error?.

The thing I can?t figure out is I am able to boot right to windows using a boot disk.

Can anyone tell me what I should do next?

A:Maxtor Hard Drive Issue

Check to make sure the drive is being detected correctly in the BIOS.
You should check the IDE/SATA and power connectors to the drive, to make sure they are not loose.


Find the manufacturer of your hard drive and run their Hard Drive Diagnostics Utility.

Read other 1 answers
RELEVANCY SCORE 62.8

Hey guys

I have a Maxtor Hard Drive hooked up to my Mac Book Pro and the other day (midway through using it!) it lost power supply, By this I mean the disk has ceased to spin and the light on the hard drive has gone out. I think it is a fault with the power input and I need a second opinion. It is not a fuse in plug as I have changed power leads but there is a power inverter before the power lead gets to the hard drive - what is the chances its a fault with this - there is a light on the power pack but it flickers when I plug it into the drive yet the hd doesn't move, light up or even fart!

Help!

Thanks Tom
 

A:Maxtor Hard Drive - no power!

What Model Maxtor External is this? I had a Maxtor PS3000 die on me, it turned out to the electronics in the enclosure died but the drive itself was fine. Ended up installing it interrnal in one of my systems.
 

Read other 1 answers
RELEVANCY SCORE 62.8

I am currently running Windows Vista Business and when I connect my Maxtor OneTouch III USB 2.0 my computer does not recognize it. How can I get the information from my hard drive onto my computer?!
 

A:Maxtor External Hard Drive

Check with Maxtor and see if they have Vista drivers for your external.
 

Read other 1 answers
RELEVANCY SCORE 62.8

I beleive I may have a bad hard drive but thought I would try everything before coming to that conclusion. It is a 45gig hard drive. It started when I was unable to delete files, I would delete them and then after restarting the drive, they would show up again. I tried to reformat under two operating systems. I need FAT32 so on the XP OS I used CompuApps Swissknife to attempt to format. It showed that the format was successful after completion however none of the files were gone. Next, I took it into a Windows 98 and tried FDisk. Fdisk couldn't get past "checking drive's integrity" It would stay at 0% forever. I wasn't even able to get a letter assignment for the drive on 98. Trying Swissknife on 98, accomplished the same thing on XP. Said it was completed but never got assigned letter and when drive was restarted the volume it said it had created was gone. I can only imagine the drive is done for. Any Ideas?

All bios's on both OS recognized the drive properly.

Thanks
JOe
 

A:Maxtor Hard Drive Problem

Read other 11 answers
RELEVANCY SCORE 62.8

Alright so I have this old maxtor hard drive that im trying to plug into my laptop. It has shown up before once or twice but now when i plug it in it makes the noise that any other usb plug in makes but will not show up in My Computer.. i have seen other help sites but i dont understand what they are saying or telling me to do.. can anyone help me get it to show up. i have stuff on it also i would like to not have to delete it.

thanks so much
 

A:My Maxtor Hard drive will not Show up.

Read other 7 answers
RELEVANCY SCORE 62.8

I have a computer with a 1.99GB hard drive, which is not big enough for my family. I have a Maxtor 2GB one that I would like to put in as a slave. On the Maxtor it reads

Master/Single On
Slave Off
Jumper J20

where do I put the jumpers to make the Maxtor the slave drive? And do I have to put jumpers on the one that is in the computer already to make it the Master? Thanks.
 

A:Jumpers on Maxtor Hard Drive

Leave the jumper off totally. Depending on the first one, what brand it is, you may have to change that jumper. It should already be jumpered as master. Hook this one up, pop into the bios setup and see if it appears.
 

Read other 1 answers
RELEVANCY SCORE 62.8

I hope that someone can help with this... please!
I have a maxtor 80gb portable hard drive and when i try to access my files by clicking on the drive in windows explorer i get the following message -
"You need to format the disk in drive F: before you can use it. Do you want to format it?"
I have a lot of data stored on this drive and i don't know why it suddenly appears empty. I don't want to lose all of the data already saved on this disk. What should i do?

A:Fault with Maxtor Hard Drive

It sounds like the disk lost the information on it, or it got corrupted. Did you ever unplug the disk without clicking the icon at the bottom right to "Safely Remove Hardware"?

Read other 4 answers
RELEVANCY SCORE 62.8

I recently oredered a Plumax 2.0 USB external hard drive to help my dad back up his laptop. However I'm unsure exatly how to format the dirve or get it working. Being USB i tried just plugging it into the computer, and was were notified of it running at a reduced speed due to USB 1.0 on our computers. It aslo detected and installed new USB Mass storage device hardware. However it does not show up under My computer as a drive. Under device manager the maxtor HD shows up and says it is working properly, and also it shows up in the USB as mass storage device. I run Win XP and was wondering if i need to format this thing or if its broken? Thanks a bunch
 

A:Plumax/Maxtor 2.0 USB hard drive

The drive is working fine. The reduced speed message is normal when you plug a USB 2.0 device into a USB 1.1 port.

As far as the drive not appearing, it's not formatted! Right click on My Computer, select Manage. Select Disk Manager, and find the USB drive in the drive list. Right click on the drive and select Format. When you get done, it'll show up in My Computer.
 

Read other 1 answers
RELEVANCY SCORE 62.8

I recently purchased a Maxtor 320GB Diamondmax 21 EIDE to be setup as a seconday storage device. I have set my current WD 120GB to Master and the Maxtor 320GB to Slave. It reads the Maxtor 320GB in the BIOS and in Win XP under Disk Management. I have triple checked the jumper settings and the cables(Black = Primary Master and Gray = Primary Slave). When I go to format the Maxtor 320GB it formats all the way and then give a popup window that says Format Unsuccesful. Please help.
 

A:Maxtor 320GB Hard Drive

Read other 15 answers
RELEVANCY SCORE 62.8

About a month ago I purchased a Maxtor Ultra ATA/133 Hard drive. Once I got the hard drive I realized that it was not compatible with my computer. I emailed the company I bought the drive from and they told me to buy Serial ATA Adapter. After installing the drive and adapter and from what I understand as all the software, the Hard drive is recognized as as being connected, but is not showing up under my computer or anywhere where the drive can be used.

I am just wondering if there is something here that I am missing or have overlooked. any help would be greatly appreciated
Thanks,
Clint
 

A:Problem with new MAxtor HArd Drive

Read other 16 answers
RELEVANCY SCORE 62.8

My old PC HArd Drive crashed ...
Now I want to recover my Data from it when I connect this Hard drive via USB adapter to my NEW PC
i got only 1 option to Format it .
as I said I want to recover my data from it so i treid few below softwares

Now Problem is the HD size is 80 GB & I see only 31 GB and it says RAW on it ...remaining 49 GB is Still missing .....Check the sceen shot of one of the program i used to recover my data.

Now please suggest me what should I do so i might be able to revocer and able to find the lost 49 GB on my Hard Drive.

Anxiously waiting for reply
Thanks
 

A:Maxtor ATA Hard Drive Crashed 80 GB

Read other 10 answers
RELEVANCY SCORE 62.8

I have been using a Maxtor 6 external hard drive for a bout a year now without any problems at all. Yesterday all of a sudden it isn't being recognized my my computer. It shows the original internal drive c but not the external drive d. Any ideas what could be causing this problem
Any help will be very gratefully appreciated
Beachwolf132
 

A:Maxtor 6 external Hard Drive

First, try it on another computer. If it works there or not will tell you whether you have a computer problem or a drive problem. You need to know that before you know which direction your further diagnostics should take.
 

Read other 3 answers
RELEVANCY SCORE 62

hey i have a Maxtor personal storage 3200 and im having a bit of a problem...

i got it at christmas and until now it has been great!

i plug it in and connect it up using the usb cord and then..computer says theres a power surge on the hub port....
i disconnect the HD and reset it and nothing happens.... not quick - play nothing!!!!
the HD is turned on and working (hear it working) (light is on)
im a bit unhappy becuase its basically brand new!

please help!!!!!!!!!
 

A:Maxtor Hard Drive wont Load!!!!!!

Read other 12 answers
RELEVANCY SCORE 62

hey, I have a External Maxtor 750GB OneTouch 4 Plus drive and I slightly bumped it over the other day while watching a video on it. Now when I plug in my drive it says in the task manager "new hardware found" (im using XP by the way) but when I go to device manager I can't seem to find the drive. My drive now makes beeping and grinding noises for the first three minuets when I give power to it but the drive still seems to spin. Is there much I can do to possibly get my data back besides taking the case apart and plugging it in internally?
 

A:External Maxtor hard drive problem

It sounds like the hard drive itself is damaged and not the enclosure. If so, installing it internally won't do any good. You could always try the freezer trick but I'm not so sure it will work here but you have nothing to lose. If your data if particularly valuable, there is always professional data recovery services. On the other hand if your data was that valuable, likely you would have your data backed up.
 

Read other 1 answers
RELEVANCY SCORE 62

Hi,

As with a few people on here, I have had an issue with my once thought 'always reliable' Maxtor 300 GB External Hard Drive. Then the inevitable occurred, and as I was writing to it, an error occurred, and computer kind of half froze, so I stupidly pulled out the USB Cable. Now when I plug the hard drive in, it doesn't even recognise it, nor when I try it out on other computers.

So it seemed like the next step was to pull it out of its case, and connect it to my home computer as a secondary drive. Got a friend over to do that for me, and now under disk managament, it says it is "unallocated", and seems like I can't access it. I tried to "Initialize" it, but doesn't seem to be doing anything.

So I guess my first question is what is this whole "initialize" command, as far as I have read, it is always the first step in formatting my drive (which is the LAST thing I want to do - did I say this data I have is unbacked up and priceless to me?). Is there any other suggestions people have for me?

Thanks in anticipation, cheers David.
 

A:Maxtor External Hard Drive taken apart and reconnected

Read other 10 answers
RELEVANCY SCORE 62

I installed windows xp on this and it was fine. However, I can't get windows to fully recognize this hard drive. It always puts it in the 2nd channel master in the bios start up no matter how I plug in the cables (or don't plug some in) and it calls it a removeable drive with the icon on the taskbar to safely remove this hardware. Also, it freezes after I go into windowsupdate.com and/or a couple minutes or so after loaded into windows. I've looked through the manual and it says it will take sata up to 3 gb/s (which this is) and I set the jumper to limit it to 1.5 since that's all the cable is good for.
 

A:Maxtor Diamond 10 80 GB Sata Hard Drive

Read other 6 answers
RELEVANCY SCORE 62

Hey all, im having some issues with an Maxtor One Touch 4 500GB external hard drive i purchased. I bought it about 6 months ago, and it worked perfectly during that period. However i recently went overseas for a month and when i came back my computer was unable to recognise it as an external device.
The hard drive runs of usb and a power adaptor, and when i first turnoed on my machine and attempted to plug in my external hard drive, the computer froze, when i reset it failed to load with the hard drive still plugged in.
I removed it and everything worked perfectly, i once again tried to plug in the hard drive, and it attempted to reinstall the software on my computer, yet i was still unable to see or view the device through my computer or safely remove hardware.
With further attempts disconnecting and reconnecting the hard drive my computer would freeze and windows explorer would reset or close.

I was able to get my music data off of a friend, and all that remains on the hard drive are movies, and general copies of files on my computer, so i wasn't to worried about losing data.

Today i decided id attempt to play around with it again, and i read on several posts that the issue could have been caused by the casing of the external hard drive. I removed the hard drive from the case, and purchased a new SATA cable to connect to my motherboard. Yet when i attempted to turn on my PC with the hard drive connected via only this cable it came up with the message, "... Read more

A:Maxtor/SATA hard drive issues

try downloading this drive fitness test software fom this link- http://www.tacktech.com/display.cfm?ttid=287#maxtor and check the fitness of the drive

Moderator Edit:
This test requires internal connection
 

Read other 2 answers
RELEVANCY SCORE 62

Hello, I've recently done a clean install of Windows 7 Ultimate and one of my harddrives is not showing up correctly. The harddrive itself is my Local Disk D, it hasn't got any system files on it however it is displaying at the wrong size:

The problem lies in the fact that on boot my Computer's BIOS detects the harddrive as a 233GB harddrive. This is not a problem as I understand that the harddrive itself isn't the exact size as what it says on the box, however the Windows 7 installation and Windows itself only detects the harddrive as being 148gb.

What I've Tried Doing:
I've tried different things to resolve this issue. I've looked at the Disk Management, but there are no extra partitions and I've also looked at the harddrive in Partition Manager which again only picked up 149gb and no unallocated space.
I've run a partition recovery tool in Partition Manager which did not detect any lost partitions containing the rest of the harddrive.
My System:


Code:

------------------
System Information
------------------
Time of this report: 10/18/2010, 18:30:10
Machine name: SAM-PC
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: To Be Filled By O.E.M.
System Model: To Be Filled By O.E.M.
BIOS: BIOS Date: 09/23/03 17:35:41 Ver: 08.00.09
Processor: AMD Opteron(tm) Processor 146, ~2.0GHz
Memory: 2046MB RAM
Available OS Memory: 2046MB RAM
Page File: 890MB used, 3202MB ... Read more

A:IDE Maxtor 250gb Hard drive Problem.

Hello samboyd93. Welcome to the forum.

The only thing I can think of is that the drive is set as a SATA2 drive on an older computer that only does SATA1 (please fill in your "My System Specs" to help avoid these kinds of guesses) although I doubt it.

If you look at the back of the HDD there are jumper pins. Setting a jumper sets the SATA speed on most drives. You may need to consult the HDD's documentation to see what the different jumper positions do. Every manufacturer has a different setup.

I would try setting the drive as SATA1 to test. But both drives should be at the same setting. Also try plugging the problem drive into a different port or using a different SATA cable. Can't hurt, might help.

You should also go into your BIOS and check the settings for that drive and compare them to the settings for the other drive. They should be the same.

Hope that helps.

Read other 9 answers
RELEVANCY SCORE 62

I had a Maxtor 250 hard drive, and someone plugged a laptop power lead in it and it zapped it. I have dismantled the external hard drive and put the maxtor directly into my pc, but this stops the pc booting.

I have spoken to maxtor and they have suggested that I buy a hard drive circuit board, but I cannot find anywhere that sells them. (Or I just don't know where to look).

maxtor have told me this....

"For the following Maxtor hard drive models: Fireball 3, DiamondMax 16, DiamondMax Plus 8, DiamondMax Plus 9, Diamond Max 10 and all MaxLine products there is also a GTLA Number on the model (next to barcode on the bottom of the drive). Format 1Y222J2223322. 1, 2 and 3 stand for numbers, Y and J for letters. The numbers 1 and 3 as well as the letter Y need to be identical to be able to replace the PCB on these drives."

My Hard drive details as follows: DiamondMax 10.
Model: 6L25ORO
250GB PATA133 HDD
TLA #: 6L25ORO153401 AAB
SN: L59L82XH

Any help or advice on how I can get my hands on one of these and you will make a friend for life.

Thanx in anticipation
 

A:Where can I get a Maxtor Hard Drive Circuit Board?

Read other 12 answers
RELEVANCY SCORE 62

Hi

I have a Maxtor Basics External Desktop Hard Drive (500GB)which I have been using for a few days on my PC and it works fine. Will it work on my laptop? I plugged it in but it doesn't seem to work, no found new hardware message etc. I'm using Vista on both machines...
 

A:External Hard Drive Problem (Maxtor)

Read other 7 answers
RELEVANCY SCORE 62

Hey all, im having some issues with an Maxtor One Touch 4 500GB external hard drive i purchased. I bought it about 6 months ago, and it worked perfectly during that period. However i recently went overseas for a month and when i came back my computer was unable to recognise it as an external device.
The hard drive runs of usb and a power adaptor, and when i first turnoed on my machine and attempted to plug in my external hard drive, the computer froze, when i reset it failed to load with the hard drive still plugged in.
I removed it and everything worked perfectly, i once again tried to plug in the hard drive, and it attempted to reinstall the software on my computer, yet i was still unable to see or view the device through my computer or safely remove hardware.
With further attempts disconnecting and reconnecting the hard drive my computer would freeze and windows explorer would reset or close.

I was able to get my music data off of a friend, and all that remains on the hard drive are movies, and general copies of files on my computer, so i wasn't to worried about losing data.

Today i decided id attempt to play around with it again, and i read on several posts that the issue could have been caused by the casing of the external hard drive. I removed the hard drive from the case, and purchased a new SATA cable to connect to my motherboard. Yet when i attempted to turn on my PC with the hard drive connected via only this cable it came up with the message, "unable to rea... Read more

A:Maxtor/SATA hard drive issues

Some steps to consider:

Are you giving the hard drive power when connecting to your motherboard? You need to connect the Sata power cable to the drive. Simply plugging the sata data cable in isn't enough.
Are you disconnecting your other internal hard drive?
If the external HD is powered and the internal hard drive is connected, check BIOS for boot priority. It may be attempting to read from the external drive and when it fails to find boot data, you get that error.

Good luck

Read other 1 answers
RELEVANCY SCORE 62

My maxtor 250gb external hard drive isn't working.
http://www.maxtor.com/en/hard-drive-backup/external-drives/maxtor-onetouch-4-mini.html
When i plug it into my computer the light turns on and it makes the sound in the attached file (Had to be .zip because it wouldn't let me attach .amr). It is fairly quiet so you may need to turn your speakers up. I just need a quick fix to get some files.

Thanks for any help
 

Read other answers
RELEVANCY SCORE 62

I have a Maxtor external hard drive that I have been using for a few years now
Im trying to hook it up to my computer for the past few months but its not seeing it
I tried everything nothing will help I have a new usb cable did not work either
Downloaded update of win xp sp3 still no change
Can anyone help me get my files from my drive

thanks
 

A:Maxtor external hard drive will not load

Read other 7 answers
RELEVANCY SCORE 62

Hi,

My Maxtor External Drive became corrupted and I needed to re-format the drive.

Unfortunately, while Working in Windows XP I accidentally deleted the partition and the drive.

Now I can't get Windows XP to recognize the Maxtor Drive. I tried re-booting the PC and plugging in the Maxtor USB Cable, but this did not work. The Maxtor Drive was my H: Drive.

Can anyone help me get Windows to recognize my Maxtor Drive?

When I deleted the drive I was working in the "Computer Management" Screen.

I navigated to this screen through the following path: Control Panel/Administrative Tools/Computer Management.

Thanks in advance for the help.

roadman7
 

A:Installing Maxtor External Hard Drive

The drive should show in Control Panel/Administrative Tools/computer mangement/disk management,but without a drive letter.
Right click the drive and click add partition.
Then right click it and click format.
Formatting will take a while.
 

Read other 2 answers