Over 1 million tech questions and answers.

Blue Screen ntoskrnl.exe 0X0000000A

Q: Blue Screen ntoskrnl.exe 0X0000000A

http://www.filedropper.com/091317-23368-01
link to my dump file. please help.

windows 7. PC working properly in safe mode but in normal mode getting shutdown immediately at startup.

RELEVANCY SCORE 200
Preferred Solution: Blue Screen ntoskrnl.exe 0X0000000A

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Blue Screen ntoskrnl.exe 0X0000000A

? OS - Windows 7
? x64 ?
? What was the original installed OS on the system? not sure about question . service pack 1
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? don't know
? Approximate age of system (hardware) 3 years
? Approximate age of OS installation (if you know)
? Have you re-installed the OS? dont remember

? CPU - intel i7-4770k
? Video Card -zotac 1 gb nvidia
? MotherBoard (if NOT a laptop) - intel
? Power Supply - brand & wattage (if NOT a laptop) cooler master 500W spms thunder

? System Manufacturer
? Exact model number (if laptop, check label on bottom)

Desktop

Read other 1 answers
RELEVANCY SCORE 92.4

http://www.filedropper.com/091317-23368-01
link to my dump file. please help.

windows 7. PC working properly in safe mode but in normal mode getting shutdown immediately at startup.

A:Blue Screen ntoskrnl.exe 0X0000000A

? OS - Windows 7
? x64 ?
? What was the original installed OS on the system? not sure about question . service pack 1
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? don't know
? Approximate age of system (hardware) 3 years
? Approximate age of OS installation (if you know)
? Have you re-installed the OS? dont remember

? CPU - intel i7-4770k
? Video Card -zotac 1 gb nvidia
? MotherBoard (if NOT a laptop) - intel
? Power Supply - brand & wattage (if NOT a laptop) cooler master 500W spms thunder

? System Manufacturer
? Exact model number (if laptop, check label on bottom)

Desktop

Read other 1 answers
RELEVANCY SCORE 67.2

I desperately need help. My hard drive crashed hard and was not recoverable. I had to purchase a new drive to replace it. At the same time I decided to install Vista Business OS. I worked with the mfg who took control of my machine and updated the Intel chipset drivers to Vista, the video card drivers and all other necessary drivers to Vista.Now my problem, I continue to crash with error 0x0000000A (0xBABffffC, 0x00000002, 0x00000000, 0x81E814C) Can anybody help me. Microsoft evidently knows of this but I could not find anything on their help and support nor thru the reporting/solutions. It tells me to check back later. My husband is beginning to think I don't know how to run a computer and I'm beginning to wonder myself! I have only been running this new hard drive and Vista for a few days, and now this stuff is happening.My thanks in advance to anyone that can help me out.DonnaHere is what the event report says:Log Name: ApplicationSource: Microsoft-Windows-WMIDate: 3/22/2009 10:14:54 AMEvent ID: 10Task Category: NoneLevel: ErrorKeywords: ClassicUser: N/AComputer: DDBPC1Description:Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the... Read more

A:blue screen crash 0x0000000A

The error report should be in the System log file (the errors that you posted are from the Application log file).For more info on BSOD messages, see this link: http://www.bleepingcomputer.com/forums/top...tml#entry409491For assistance in diagnosing the crashes, see this link: http://www.bleepingcomputer.com/forums/t/176011/how-to-receive-help-diagnosing-blue-screens-and-windows-crashes/

Read other 34 answers
RELEVANCY SCORE 67.2

Brand new computer build. I ran memtest86 on my old ram cards. After about 10 hours it came back with 5 errors. I took the RAM back to the store got the same brand (Patriot 1600Mhz 16GB RAM). I ran memtest86 twice on the new ram and theres no errors.

Other specs:
i7 4771 3.5GHz
16GB patriot ram 1600mhz
2TB Seagate 7200
MSI Z87-G43 Motherboard
Intel HD 4600Graphics
750watt corsair gold certified psu

Here are my dump files. If you guys could help that would be extremely appreciated. The error is 0x0000000a .

A:0x0000000a blue screen error

Hi TheeFrenzy.

There may be multiple caused of the BSODs, and we should eliminate the causes one by one.

First, AVer Media.
Start Menu\Programs\AVerMedia
Start Menu\Programs\AVerMedia\AVer MediaCenter 3D
Start Menu\Programs\AVerMedia\AVerQuick
Update the program. If there is no feasible update (I dot have idea about it), uninstall the program.

Let us know the resulting situation. Will decide the next courses of action seeing the results.
____________________________________________________________________________________________

Code:
fffff880`03e16878 fffff880`04e4eff5Unable to load image \SystemRoot\system32\DRIVERS\AVerTM62_x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for AVerTM62_x64.sys
*** ERROR: Module load completed but symbols could not be loaded for AVerTM62_x64.sys
AVerTM62_x64+0x1fff5

--------------------------------------------------------------------------------------------
fffff880`04e2f000 fffff880`050f6200 AVerTM62_x64 T (no symbols)
Loaded symbol image file: AVerTM62_x64.sys
Image path: \SystemRoot\system32\DRIVERS\AVerTM62_x64.sys
Image name: AVerTM62_x64.sys
Timestamp: Wed Nov 23 11:43:19 2011 (4ECC8EFF)
CheckSum: 002C7CDE
ImageSize: 002C7200
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Read other 3 answers
RELEVANCY SCORE 67.2

Please someone help me !!!

A:Blue Screen Of Death Help 0x0000000A

oh and i cant do the diask defragement because it always freezes while its in process :(

Read other 16 answers
RELEVANCY SCORE 67.2

someone help me i am always having this Blue Screen of death problem and my computer also ticks when it starts and the error code is 0x0000000A

A:Blue Screen Of Death Help 0x0000000A

Please provide the information in this post so we can help you:
http://www.techsupportforum.com/1871981-post2.html

Read other 2 answers
RELEVANCY SCORE 65.6

Hi guys,
I hope you can help, I've been having some random crashing and BSOD's

I thought at first it was my webcam drivers 9as a crash happened whilst using Skype) so I installed the latest version from the manufacturers site.But I'm still having issues.

I'm not playing games or even pushing the processors with lots of programs etc. These happen sometimes when just using Facebook and not much else.
Sometimes everything freezes and other times I get a full on crash and reboot.
Thanks in advance
GD

A:Random Crashes/ Blue Screen IRQL_NOT_LESS_OR_EQUAL 0x0000000a

Hi again.

All the recent BSOD-s seem to be caused by Creative Technologies video capture driver.
Please uninstall its software and unplug the device from your system. See if you still get BSOD-s.

What antivirus software do you use? We recommend MSE and MBAM.





Quote:
Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-Microsoft Security Essentials - Free Antivirus for WindowsMalwarebytes : Malwarebytes Anti-Malware removes malware including viruses, spyware, worms and trojans, plus it protects your computerGood and Free system security combination.
How to Scan Your Computer With Multiple Antivirus Programs - How-To Geek




   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

Make scans with the following:

-Kaspersky TDSSKillerAnti-rootkit utility TDSSKiller
-ESET online scannerFree Online Virus Scanner | ESET
In addition, run the malicious software removal tool and WDO:Malicious Software Removal Tool
Windows Defender Offline



Perform a System File Check:Click on the start
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker
Disk Check on your hard drive for fil... Read more

Read other 5 answers
RELEVANCY SCORE 65.6

A few days ago I was minding my own business, surfing the web, when my computer shut down on me without any warning or notification. At first I thought there was some power surge but the comp began to restart. It went into startup repair and sat there for 30 minutes before notifying me that "the problem could not be solved." Half of the time I turn on the comp, it says that it has shut down incorrectly and whether or not to go into safe mode or start Windows normally. The other half of the time, the computer immediately goes into startup repair and sits there for a half hour before giving me the same "could not fix the problem" message. If I start Windows normally, 3 different things can happen:
1. Stays on the "Welcome" screen for a while, then screen goes black, then blue screen pops up followed by an immediate restart
2. Loads the desktop normally, and after 2 minutes immediately goes to blue screen + restart, without warning
3. Loads the desktop normally, and all seems to be normal but comp refuses to sleep, hibernate, or shut down (this has only happened once so far)
After much research into this I discovered there was a hotfix for a problem that seems to describe mine almost perfectly (based on the exact same blue screen codes "IRQL ..." and "STOP: ...") But other sources say there are other possibilities such as anti-virus programs, updates, or device drivers that can cause the problem, as well as hard drive failure and other nasty scenarios.... I have no idea how to p... Read more

A:"IRQL_NOT_LESS_OR_EQUAL" blue screen w/ "STOP: 0x0000000A" code

Hi
 
Based on the problem description you written, i suspect a Root kit issue. FBI money pack is known to install rootkits in the system.  This types of infections should be removed under the supervision of a trained malware helper. Post a malware removal request in the Malware section.
 
Follow the instructions in the below link :
 
http://www.bleepingcomputer.com/forums/t/34773/preparation-guide-for-use-before-using-malware-removal-tools-and-requesting-help/
 
Typical cause of this BSOD are a faulty driver, service or Memory corruption. Rootkits are known to install their driver and service in to the system. So the first step is to make sure the system is malware free.
 
Any troubleshooting step without confirming the system is malware free is pointless.

Read other 3 answers
RELEVANCY SCORE 65.6

My PC build Specs

-Intel DX38BT Motherboard
-Corsair XMS3 2048MB Dual Channel PC10600 DDR3 1333MHz Memory (2 x 1024MB)
-Intel Core 2 Quad Q6600 Processor
-Ultra LSP650 650-Watt Power Supply
-HIS Radeon HD 3650 512MB PCIe w/Dual Link DVI
-Western Digital Caviar SE16 SATA 320GB Hard Drive
-CD-rom 56x (From my old server)
-Case (From my old server)

Well I get a BSOD after trying to install Windows XP on my new built pc. It formated good, it get stuck on installing OS about 39%. 1Then I has a little bar on the left it goes about more than half way. The screen turns black and BSOD.
I am 100% these parts are compatible, I went on support.microsoft.com and check their HCL and my board was on it. I followed the steps in the booklet, In the book let it says that removing the install to fix the problem is RARE.

1.Restart your computer. NO FIX
2.Make sure any new hardware or software is properly installed... NO FIX
3.Click start > Help and support> Get help from Microsoft. .... Well I wish the OS was Installed
4.Click start > Help and support> Fixing a problem
5.Disable or remove any newly installed hardware.... I tried only 1 gb of ram and nothing
6.Microsoft Web Site at:..... I studied it and found no help
7.Using a current version of your antivirus software... New build no OS installed due to BSOD
8.Verify that your hardware device drivers and system bios are latest available version.... NO FIX
10.Disable Bios memory options such as caching and shadowing Well skip t... Read more

A:Blue screen of Death! Stop code (0x0000000A)

More research done....

-"If this issue occurs after the first restart during Windows Setup, or after Setup is complete, the computer BIOS may be incompatible with Windows." Well on the HCL on Microsoft's site said it WAS compatible so its not that.

-Make sure that you have sufficient hard disk space... 360GB is well enough

-Disable or update device drivers... No OS

-Remove all third-party drivers... No OS
 

Read other 4 answers
RELEVANCY SCORE 64.4

This has happened every time I've shut my PC down for 3 months. My computer doesn't seem to be affected by it as far as operation goes (though I am afflicted w/ malware at the moment - it's on the HJT log forum). It's just annoying. Is there any way to fix this without losing everything I've downloaded since then?

I get (of course) the blue screen with this toward the top

IRQL_NOT_LESS_OR_EQUAL

Then these codes show up:

STOP: 0x0000000A (0x000000B0, 0x00000002, 0x00000000, 0x804EF3EE)

This started shortly after I downloaded a trial version of Norton Internet Security. One of the components didn't install properly. I have removed all the components as far as I can tell.

I would appreciate any help you could give me with this.

Thanks!

A:Dreaded blue screen - 0x0000000A (0x000000B0, 0x00000002, 0x00000000, 0x804EF3EE)

Hi jamyeda,

Please be patient and wait until the HJT anaylst has finished 'cleaning' your computer of the malware issues.
It is pointless at this stage attempting to fix anything until such time as you are cleared from the HJT Support Forum.

Kind regards,

Read other 1 answers
RELEVANCY SCORE 64.4

I am running Windows XP SP2 on a Dell Dimension 9100. I am posting a new thread b/c I didn't see one that was very similar to my issues. Aside from having a whole host of other problems (which I'm not sure if I should address here or separate into other forums by topic e.g. downloaded Spywarebot by mistake instead of Spybot S&D, and residual issues, external hard drive not being recognized, issues with hp all-in-one) I receive a blue screen error upon shutting down my pc summed up version:

IRQL_NOT_LESS_OR_EQUAL

blah, blah

STOP: 0X0000000A (0X000000B0, 0X00000002, 0X00000000, 0X804EF320)

Beginning dump of physical memory . . . etc.

My pc is running regularly, but when I restart or shut down, I get this error after windows XP logs me out, saves my settings and starts to run the shutdown process (that's what it says before the blue screen appears). I then can't do anything but manually turn the pc off. The next time I turn it on I get notification that the system has recovered from a serious error - report to Microsoft, etc.

I contacted Dell on 4/9 and they ran me through several tests. They had me uninstall my SONIC software thinking that there was an issue with it (cd burning software). I forgot to mention to them that since my external backup drive isn't being recognized in the USB controllers in device manager, I uninstalled the software for that (Maxtor and Retrospect). They had me do a system restore back to last Friday, but it didn'... Read more

A:Solved: stop 0x0000000a (0x000000bo Blue Screen on Shutdown and Other Issues

Read other 11 answers
RELEVANCY SCORE 64.4

Guys,

Recieved this error
STOP : 0x0000000A
0xFEFD7000, 0x00000002, 0x00000000, 0x804FA497

Memory tested fine with mem86...

Im suspecting a defective Video Card?

What do you guys suggest? It wont even stay booted long enough so i can access event viewer or so
 

A:Solved: Computer Reboots Automatically, Seen A STOP 0x0000000A Blue Screen....

Read other 9 answers
RELEVANCY SCORE 64.4

Hi everyone. I was able to find some similar stories with this blue screen issue, but was unsure how to correct it. I was wondering if anyone could take the time to spell this all out for me. Would be greatly appreciated. Thanks

Running an HP pavilion dv6000

Stop: 0x0000000a (0x00000016, 0x0000001b, 0x00000000, 0x82c28791)

blue screen also says to disable bios memory options such as caching or shadowing
 

A:blue screen Stop: 0x0000000a 0x00000016 0x0000001b 0x00000000 0x82c28791

would it be more helpful if i gave more info? Just ask and ill give whatever i can find. Please help
 

Read other 2 answers
RELEVANCY SCORE 63.6

Toshiba Satellite M105-S3041Intel CentrinoWindows XP HomeLast week, I was surfing the internet and listening to online music as usual. Suddenly, my laptop shut itself down and automatically rebooted itself. I'm unable to access Windows because it keep on rebooting. I tried to reboot it into safe mode, here are the options when I press F8. "Windows Advance Options MenuPlease select an option :Safe ModeSafe Mode with NetworkingSafe Mode with Command PromptEnable Boot LoggingEnable VGA ModeLast Known Good Configuration (your most recent settings that worked)Directory Services Restores Mode (Windows domain controllers only)Debugging ModeDisable automatic restart on system failureStart Windows NormallyRebootReturn to OS Choices Menu" Every option I've chosen, I got this page;"Please select the operating system to start :Microsoft Windows XP Home EditionMicrosoft Windows Recovery Console" And when I selected "Microsoft XP Home Edition", it started to reboot itself again.....and again.Then I tried F8 again, this time I chose "Disable automatic restart on system failure". Then I see this message;"A problem has been detected and Windows has been shut down to prevent damage to your computer.IRQL_NOT_LESS_OR_EQUALIf this is the first time you've seen this Stop error screen,restart your computer. If this screen appears again, follow these steps :Check to make sure any new hardware or software is properly installed.If this is a new ... Read more

A:Laptop got blue screen error. 0x0000000A (0x00000000, 0x00000002, 0x00000001, 0x804DC11D)

I would try the Recovery Console option, if Last Known Good Configuration yields nothing positive.

If the RC option works, type 1 when asked which install. Just hit Enter when a password is requested.

On the next line awaiting input from you...type chkdsk /r and hit Enter.

Louis

Read other 9 answers
RELEVANCY SCORE 60

Hi there, Just finished build a PC for my dad out of my old pc bits. I have done a memtest+ overnight and uninstalled zone alarm and installed windows security essentials. Driver verifier Made the system so laggy it made it impossible to use.

A:0x0000000a ntoskrnl.exe+75c00

It appears that this install of windows is counterfeit, the Product ID matches an Acer/Gateway/Packard OEM_SLP key on what appears to be a retail Nvidia motherboard. This is only possible through an exploit, please purchase a legal copy of windows, format and then re-install using the new legal copy of windows.

Read other 1 answers
RELEVANCY SCORE 60

I have been getting ntoskrnl.exe with 0x0000000a for the past week. So far i have tryed to start up my computer with different RAM(so far that works to a point), updating my drivers that i can and run a scan. BTW i do not have the windows 7 disk.

PC Specs:
AMD A8-3820 APU with Radeon(tm) HD Graphics 2.50 GHz
4 GB of RAM(Usually have 12 GB but had to uninstall to get pc to load)
x64 OS

Model Acer Aspire X3470

The dump files are below if that helps.

~Yoshi

A:BSOD ntoskrnl.exe with 0x0000000a

Uninstall McAfee Using McAfee Removal Tool. Uninstall AVG using AVG Remover. It is very bad to have two antivirus programs installed at the same time.

Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download and install those, and then run full system scans with both of them, one by one.

Update your ATI/AMD display driver.
You can get it from the link in our forum, Latest AMD Catalyst Video Driver for Windows 7, or you may go to AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card.


During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.

Let us know the results.

Read other 3 answers
RELEVANCY SCORE 59.6

this is probably going to be difficult for both myself and whoever tries to help me, but thanks in advance. i read the instructions on making a bsod posting however every time i try to run the sf program it comes up with an error and hangs. if it worked i would be giving you all the requested files. -_-

in short my computer has been experiencing more and more frequent bsod's, and well they are annoying!
here are some specs that i can give you:
type: Laptop
mfg: ASUS
model: u47a
cpu: intel core i7-2640M
ram: 8GB
hdd: ~750GB

i have been using the program "BlueScreenView" to view the data about my bluescreens.
there seems to be the repeated occurrence of a certain error: see attached photo [bluescreen.jpg]

my dump files are included.
any help you can provide to aid the solution of this error is greatly appriciated!
if there is anything i can do to assist you just ask and post instructions on how to do what is asked.
MANY MANY THANKS! ^_^

A:Error 0x0000000a caused by ntoskrnl.exe

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 0, fffff80003481e52}

Probably caused by : dxgmms1.sys ( dxgmms1!VidMmiProcessTerminationCommand+5f )

Followup: MachineOwner
---------
1: kd> lmvm dxgmms1
start end module name
fffff880`103a1000 fffff880`103e7000 dxgmms1 (pdb symbols) c:\symbols\dxgmms1.pdb\93AB163000A844D5BF442A979FB6FF991\dxgmms1.pdb
Loaded symbol image file: dxgmms1.sys
Mapped memory image file: c:\symbols\dxgmms1.sys\5164DC1346000\dxgmms1.sys
Image path: \SystemRoot\System32\drivers\dxgmms1.sys
Image name: dxgmms1.sys
Timestamp: Wed Apr 10 12:57:15 2013 (5164DC13)
CheckSum: 00043C9B
ImageSize: 00046000
File version: 6.1.7601.18126
Product version: 6.1.7601.18126
File flags: 0 (Mask 3F)
File OS: 40004 NT Win32
File type: 3.7 Driver
File date: 00000000.00000000
Translations: 0409.04b0
CompanyName: Microsoft Corporation
ProductName: Microsoft? Windows? Oper... Read more

Read other 9 answers
RELEVANCY SCORE 59.6

My computer has suffered a BSOD on 07/29/12, 08/03/12, 08/16/12, 10/08/12, and 10/13/12

I have attached the Seven Forums Diagnostic Logs.

My System Specs are:
Asus P8Z68-V/Gen3 Mobo
Intel Core i5 3570K Processor
4x 4GB G.Skill Ripjaws Series DDR3 Ram
Crucial 128 GB m4 solid state Drive (this is my Windows drive)
Western Digital Caviar Black drive
Corsair TX650 V2 PSU

The most recent BSOD resulted in Windows not starting. My wife was browsing the web when it occured.

I unplugged everything non-crucial, but Windows still wouldn't start.

I hit F8 repeatedly and got into a repair menu that let me attempt to do a System Restore. I was told the System Restore failed so I shut down and fiddled with the cords in the computer a bit.

When I turned it on Windows Started and told me it had indeed successfully restored the system to a few days prior.

This also popped up when I finally got windows started:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: a
BCP1: FFFFFFFFFFFFFFFF
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF80002CB09B2
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
101312-5928-01.dmp
WER-9032-0.sysdata.xml

Thank you all so much for any help you might have!

A:Windows 7 BSOD -0x0000000a ntoskrnl.exe

Welcome aboard.

► Intel Rapid Storage Technology:

Code:
fffff880`02d9d058 fffff880`04271255Unable to load image \SystemRoot\System32\Drivers\dump_iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dump_iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for dump_iaStor.sys
dump_iaStor+0x71255
Update it from http://downloadcenter.intel.com/Deta...d=RST&lang=eng. Take either the third or the fourth one listed, depending on your language settings of the system.

► Intel Graphics driver:

Code:
fffff880`02d9d518 fffff880`0f4bf5dd*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
igdkmd64+0xbc5dd
Update it from http://downloadcenter.intel.com/Default.aspx.

► Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
Let us know the results.

Read other 7 answers
RELEVANCY SCORE 59.6

Hey guys
I was recently having BSOD Problems and a super glitchy problem until I received help on this forum and deleted my Avira antivirus, which sped my computer up back to normal. Now im having BSOD IRQL_NOT_LESS_OR_EQUAL problems.
Any help with this would be appreciated, I have attached a dump file rar. How do you read through those to identify the problem by the way? Would like to know how to do this myself if possible

Thanks alot

Read other answers
RELEVANCY SCORE 59.6

Here's what I got:

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Thu 7/17/2014 1:49:32 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\071714-23462-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0xA (0x0, 0x2, 0x1, 0xFFFFF800030DAC3F)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Thu 7/17/2014 1:49:32 PM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: symnets.sys (SYMNETS+0x1E7BB)
Bugcheck code: 0xA (0x0, 0x2, 0x1, 0xFFFFF800030DAC3F)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\N360x64\1501000.012\SYMNETS.SYS
product: Symantec Security Drivers
company: Symantec Corporation
description: Network Security Driver
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL ... Read more

A:BSOD cause by ntoskrnl.exe error 0x0000000a

It's Norton, every one of your dumps points it out:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800030dec3f}

*** WARNING: Unable to verify timestamp for SYMNETS.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMNETS.SYS
Probably caused by : NETIO.SYS ( NETIO!WfpExpireEntryLru+17 )

Followup: MachineOwner

Code:
fffff880`035085c8 fffff880`04588900Unable to load image \SystemRoot\system32\DRIVERS\SymIMv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SymIMv.sys
*** ERROR: Module load completed but symbols could not be loaded for SymIMv.sys
SymIMv+0xc900
Uninstall Norton and install MS Security Essentials and MalwareBytes.



   Note
Make sure you uncheck the 'Enable Free Trial' box when installing.

Read other 7 answers
RELEVANCY SCORE 58.8

Dumps :

Installed today quite lot things, but it happened when playing Starcraft 2, and i had Intel extreme tuning utility, HD 4000 OCed from 1150Mhz to 1300 which accordingly to Overclocking Intel’s HD 4000 | SemiAccurate should be stable.
Then i disabled it, running at standard 1150mhz played around 2-3missions, then exactly at the end when i saw the battleship and the game loading onto next level it did BSOD again, is this game related?

A:0x0000000a + IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe random BSOD, help :S

To be able to help you, we'd need you to attach a full report. This includes, sys$list, nfo etc. To get these files, use our thread below.

http://www.sevenforums.com/crashes-d...tructions.html

BSOD Analyse

Looking at your bugcheck it's likely that a memory corruption event was triggered. Though a driver could be causing the memory to be borked, but we're usually suggesting a memory test before moving forward. Do a scan with Memtest86+. Memtest is a scanner that'll check your sticks for errors.



   Warning
Note that the below instructions may break your WARRANTY rules. If you're unsure check manuals, separated warranty papers, stickers on computer for secure permission.

To ensure that we'll know if it's the slots on the motherboard that's broken, or the sticks itself - we have a little procedure we'll recommend. Remove 1 stick, scan the other with Memtest in the current slot. After 7 passes, move the stick to another slot and scan, and so on and so forth until you've scanned all the sticks, and all the slots, one by one.

Memtest86+ - Advanced Memory Diagnostic Tool

Later we'll be able to tell if this has been game related. Once I get the rest of the files, I'll have a clear look.

Best Regards,
Frederik.

Read other 1 answers
RELEVANCY SCORE 58.8

Hi, I had been recently multi tasking and then all of a sudden my computer did a BSOD on me. Then when it had reset, it did another BSOD. So far, it hasn't in the last hour, but scared to open any programs that might be detrimental to my computer's safety!
EDIT: it might be worth noting that my computer did have an update last night when i reset it.

A:BSOD "IQRL_NOT_LESS_OR_EQUAL 0x0000000a ntoskrnl.exe

Hello and welcome to Sevenforums!
The cause of your BSOD is Chrome.
Run Memtest86+ to make sure.
RAM - Test with Memtest86+

Read other 2 answers
RELEVANCY SCORE 58.8

Hi,
BSOD more or less once a day.
the error is
BSOD error 0x0000000a - ntoskrnl.exe+f20c4
Attached here all the error information.
What can cause it / how to find the bad driver of hardware?
Thanks a lot in advance,
Satlos

A:BSOD error 0x0000000a - ntoskrnl.exe+f20c4

Hi satlos.

The BSOD is caused by Edimax nLite Wireless USB Adapter.
(c:\windows\system32\drivers\netr28ux.sys).

Code:
BugCheck A, {fffff6fb41640160, 2, 0, fffff8000346f5d1}

*** WARNING: Unable to verify timestamp for netr28ux.sys
*** ERROR: Module load completed but symbols could not be loaded for netr28ux.sys
Probably caused by : netr28ux.sys ( netr28ux+ab74 )

Followup: MachineOwner
---------
And the driver is old enough.

Code:
fffff880`08a67000 fffff880`08b5b000 netr28ux T (no symbols)
Loaded symbol image file: netr28ux.sys
Image path: \SystemRoot\system32\DRIVERS\netr28ux.sys
Image name: netr28ux.sys
Timestamp: Mon May 25 10:08:17 2009 (4A1A20B9)
CheckSum: 000EE46C
ImageSize: 000F4000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
There are four nLite downloads available in ::: EDIMAX Technology :::.
Attachment 296559
Try to get it according to the device number.

If, the information is needed in any case, the driver is actually developed by Ralink/MediaTek, it is addressed as RT2870 USB Extensible Wireless LAN Card Driver. So, you may get the first one as per the list by them, MediaTek - Downloads Windows too.

Let us know the results.

Read other 1 answers
RELEVANCY SCORE 58.8

Hello everyone,

This is my first post here. I tried to follow the posting guidelines as best I could. The zip for my dump files should be attached. If you need additional information please let me know.

A while back I started getting blue screen crashes. Once a day usually... sometimes even less. It seems to be completely random. I have yet to figure out what triggers it. At first, I never really payed attention to it as I had planned on reformatting and installing a fresh copy of windows soon, anyhow. After reinstalling I continued to get the blue screens. It was at this point that I starting doing research and learned how to access the dump files to help me figure out what the problem is.

It seems as though each crash is being caused by the same file - "ntoskrnl.exe"

A quick google searched confirmed that I was not alone. It seems that this particular file gives a lot of folks problems. I found that in most cases the problem seemed to be associated with the hard drive or memory.

I tested my hard drive using the suggested software on the manufacturers website - it passed. I also tested my memory for about 7 hours using memory test - 0 errors.

I am completely lost at this point. I'm hopping you guys can look at the dump files and give me some much needed advice.

Thank you in advance.


Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: 0x0
... Read more

A:Another Blue Screen - ntoskrnl.exe

Please post the following report before we proceed:Windows Genuine and Activation Issue Posting Instructions

Read other 9 answers
RELEVANCY SCORE 58.8

Hello

I have replaced the graphics card, hardrive and psu since I first got the BSOD messages and still nothing worked :/

I have attached the .dmp files

A:ntoskrnl.exe blue screen

  
Quote: Originally Posted by jason786


Hello, the bug checks and all are here On Sat 15/05/2010 08:10:28 you - Anonymous - CGghk7hN - Pastebin.com


We could use the actual DMP files. Use these to find and upload them to us. http://www.sevenforums.com/crash-loc...d-problem.html

thanks

Ken

Read other 9 answers
RELEVANCY SCORE 58.8

Hi everybody!
I have a problem with mi laptop, the blue screen appeas sometimes ONLY when I reset my laptop or when it's shutting down. The last time before yesterday was a month ago when it happens.
My laptop specs are:
- Sony Vaio VPCF1390x
- Intel Core i7-740QM
- 4GB Memory DDR3
- Blu-ray Disc? Read Only Drive
- 16.4" VAIO Full HD Premium Display (1920x1080)
- NVIDIA? GeForce? GT 425M GPU (1GB VRAM)
- 500GB Hard Drive (7200rpm)
- Windows 7 x64 Home Premium

This is the dump file and the result from the "Bugcheck Analysis".

I hope that won't be a physical problem.


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\Minidump\030711-36972-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* ... Read more

A:Blue Screen (ntoskrnl.exe)

Uninstall or update these old drivers:


Inter Video
regi.sys Mon Apr 16 11:19:10 2007
Corel Software Support

Citrix Deterministic Network Enhancer
dne64x.sys Mon Nov 10 20:01:24 2008
Cisco Systems, Inc

ArcSoft Magic-i Visual Effect
ArcSoftKsUFilter.sys Mon May 25 04:27:31 2009
http://www.arcsoft.com/public/download.asp







Crash Dumps:


Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [F:\a\Minidump\D M P\DMP\030711-36972-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`03016000 PsLoadedModuleList = 0xfffff800`0325be90
Debug session time: Mon Mar 7 00:05:15.250 2011 (UTC - 5:00)
System Uptime: 0 days 3:04:52.577
Loading Kernel Symbols
...............................................................
................................................................
...........................................
Loading User Symbols
Loading unloaded module list
....................
*******************************************************************************
* ... Read more

Read other 3 answers
RELEVANCY SCORE 58.8

Hello
First of all I would like to say that I would be very great full at whoever can help me.

I have received over 50 blue screen errors due to "Ntoskrnl.exe"
I have windows 7 ultimate-64bit and do not have a instilation disk.
WHat could I do
MAny Thanks

A:Ntoskrnl.exe Blue Screen

Hi, and welcome to the forum. Please read this thread, follow the instructions and post back. We will be glad to help you.

http://www.sevenforums.com/crashes-d...tructions.html

Read other 9 answers
RELEVANCY SCORE 58.8

I need some help. My Computers keep blue screening on me. My Bluescreen view is pointing to this one fil called ntoskrnl.exe I have ran so far
Ram test
Driver Verifier
sfc /scannow
and restored a backup of my system

All have failed me.Here is my dump files and a copy of the report from Bluescreenview



https://rapidshare.com/files/3172341...ed__Folder.zip
https://rapidshare.com/files/3069305...screenview.gif

Someone please help me.

System Specs: Windows 7 64bit OS
AMD Phenom II x4 840 3.20 GHZ
4GB RAM
contact if you need more info: [EMAIL REMOVED BY MODERATOR]

A:Blue Screen ntoskrnl.exe

Don't forget to turn Driver Verifier off (select "Delete existing settings").

NOTE: Please provide the following information for a more detailed response: http://www.techsupportforum.com/foru...ta-452654.html

While waiting for a reply:

I suggest starting all troubleshooting with the following diagnostic tests (located at this link: Hardware Diagnostics ). They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
Hard Drive Diagnostics (read the details at the link) - Test ALL of the hard drives.

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks




Daemon Tools (and Alcohol % software) are known to cause BSOD's on Win7 systems (mostly due to the sptd.sys driver).
Please uninstall the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): DuplexSecure - FAQ

ZoneAlarm is present i... Read more

Read other 6 answers
RELEVANCY SCORE 58.8

Hi. I'm not very good with all the technical stuff, so I found the instructions in the Posting Instructions a little daunting. I will proceed to gether information that way if required, but I'm hoping this will do.

I've had this pop up twice in two weeks, and this is what I get:

Any help on this would be great!

Thanks in advance.

A:Blue Screen - ntoskrnl.exe?

  
Quote: Originally Posted by Anesthetize


Hi. I'm not very good with all the technical stuff, so I found the instructions in the Posting Instructions a little daunting. I will proceed to gether information that way if required, but I'm hoping this will do.

I've had this pop up twice in two weeks, and this is what I get:

Any help on this would be great!

Thanks in advance.


Sorry but blue screen view doesnt always tell the whole story.


To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

Read other 5 answers
RELEVANCY SCORE 58.8

we are getting a blue screen. please see attached file

Read other answers
RELEVANCY SCORE 58.8

Just built a brand new computer. Reinstalled all the correct and up to date drivers. Everything to my knowledge is up to date. I keep getting random crashes and upon looking at the minidump, it seems to be all related to ntoskrnl.exe I get these constantly and without remorse. Doing anything on my computer will cause it to blue screen. Tried repairing windows, memory checks, fixing the registry... Nothing. I'm at a loss here and I don't know what to do. I'm falling behind in work and school. Could someone please post some advice? I'm going to post my minidump.

System is Windows 7 Ultimate x64 (bought from university)

A:Blue Screen - ntoskrnl.exe

Here's a thread that may help you get started.
Ntoskrnl.exe error after 64 bit Windows 7 install

Read other 9 answers
RELEVANCY SCORE 58.8

hello every body.!
these days i have problem with my labtop ,the problem is bsod.after that i search in the net.i found "the bluescreen view" to see the problem.
this is the what program says:

http://www.sevenforums.com/attachmen...1&d=1296243535

plz help me solov the problem
best regurds

A:help with ntoskrnl.exe blue screen

http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html

Read other 1 answers
RELEVANCY SCORE 58.8

we are getting a bluescreen with ntoskrnl.exe. any ideas?

A:blue screen ntoskrnl.exe

Hi Transamraiser,

The ntoskrnl.exe BSOD is usually related to memory so you might need to simply replace your RAM. Take out each stick of RAM one by one and try to boot your system, this may help you find the faulty memory but the lot might need replacing.

Overclocking
If you're overclocking your system with a higher CPU clock speed, put this back to normal as it might be causing problems.

Update drivers
If you have a RAID setup of disk drives, update your drivers. Also update other drivers for hardware as this problem can be caused by drivers not matching the OS.

Read other 2 answers
RELEVANCY SCORE 58.8

Please Delete thread

A:Help! Blue screen - ntoskrnl.exe ?

Hello and welcome to SF,
Please send me your Gateway Serial Number - there is additional info to provide...
http://gateway-us.custhelp.com/app/a...ail/a_id/2578/

The S/N should be Twenty-Two characters (numbers and letters)

Read other 3 answers
RELEVANCY SCORE 58
A:Random BSOD , error 0x0000000a ( fltmgr.sys + ntoskrnl.exe)

Okay

Read other 1 answers
RELEVANCY SCORE 58

Hello everybody, my name is Patricio, and I have been experimenting some random BSOD with error 0x0000000a caused by driver ntoskrnl.exe. I have tried to pinpoint the driver by myself but i failed to see which one is causing this. I have reinstalled all motherboard drivers (AMD Southbridge + Video Card Drivers), I've run this OS for around 200 days and only once every 6 months I got one of this BSOD, but now, this week, it started to do it quite often and randomly. To give you an example, I can let my computer on for hours, just letting it downloading something and it will be just fine, then use it, watch videos, surf the internet and nothing. Windows only managed to catch one Dump, as the screen stays at the 0% while the BSOD and even after letting it for half an hour, it won?t finish. I have also run a Memtest for 10 Hours, it managed to run 3 passes, but I had 0 errors. That is why I believe it is probably something related to a driver, not a system driver but a 3rd party driver, like antivirus or so. I have read the guide in sevenforums of how to run the Verifier, create a custom run, and I will let it now reboot, Hoping it can log something. I attach then, the DMP file, the Blue screen resume of the Bluescreenview from Nirsoft. And the CBS log from the sfc /scannow that I?ve run, which won?t finish working (this one has been up to something since long ago). After every BSOD I run a chkdsk on every drive and repair them if necessary. If anyone could lend me a hand about h... Read more

A:BSOD Random 0x0000000a caused by driver ntoskrnl.exe

Your dumpfile blames Probably caused by : GUBootStartup.sys ( GUBootStartup+1103 )

This is the driver for Glary utilities from Glarysoft.

Driver Description: GlarySoft - Glary Utilities Startup Manager Tool driver
Driver Update Site: Downloads | Glarysoft

Check if your version is windows 8.1 compatible, if not update or remove it to check if this stops your BSODs.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck A, {ffffc001d5d39e38, 2, 1, fffff80052ae9d08}
*** WARNING: Unable to verify timestamp for GUBootStartup.sys
*** ERROR: Module load completed but symbols could not be loaded for GUBootStartup.sys
Probably caused by : GUBootStartup.sys ( GUBootStartup+1103 )
Followup: MachineOwner

Read other 2 answers
RELEVANCY SCORE 58

Hi, Ive started to have BSOD and its constantly doing it everytime I restart and use the internet. Here is the "Minidump" folder

A:My computer is starting to have BSOD, error 0x0000000a ntoskrnl.exe

  
Quote: Originally Posted by dxchito


Hi, Ive started to have BSOD and its constantly doing it everytime I restart and use the internet. Here is the "Minidump" folder



No attachments uploaded try this method.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump D... Read more

Read other 3 answers
RELEVANCY SCORE 58

I had more bsd, but I think the 0x3b and 0xd1 are fixed. Any help would be appreciated. This is so frustrating. If its hardware related, I need help figuring out what. All my parts are new from newegg except for gpu and processor. I don't think its my ram because I swapped out different ram from my old pc and got same errors and that ram works flawless in other pc. Ran sfc scan now and chk disk and no errors. I am uploading the files you requested posted in instructions.

A:multiple bsod by ntoskrnl.exe, 0x0000000a, 0x0000001e, 0x00000050

The last 4 .dmp files point to a possible RAM problem. The only way to check that is to run a minimum of 8 consecutive passes of Memtest86+ as described here:

RAM - Test with Memtest86+

It is not sufficient to install the RAM into a different system as a test.

Read other 9 answers
RELEVANCY SCORE 58

We have deployed around 45 new HP Probook 6360's. I have been getting many calls about BSOD issues. I'm having trouble pinpointing the issue. I'm thinking it is our VPN client, Junos Pulse, or our Proxy client, Bluecoat, but it may be driver related or memory related as well. I built the computers with Microsoft Config Manager, sysprepped the system, then made my image. We deployed out HP Elitebook 6460's with the same method and have no issues.

The probooks are running Windows 7 Pro - 64bit with 8gb of ram.

Can someone please look through these logs/files and give me an idea of what to try.

Thanks

A:BSOD of on newly deployed laptops, ntoskrnl.exe, 0x0000000a

This was related to your Blue Coat Web Filter driver ( proxyclientwebfilter64.sys) Yours is dated Jan 2012 so I suspect no newer driver is available but I would check with the developer.

An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.

Read other 3 answers
RELEVANCY SCORE 58

Most nights when I close my laptop to go to bed, I wake up in the morning to either a BSOD, or the laptop will be off. I'll turn it back on to find the "start windows normally" screen, and a dialogue box asking to search for solutions to the error. This happens almost every night for the past few weeks.

I have recently reinstalled/update a lot of my drivers, but nothing is seeming to work. Any help would be greatly appreciated.

A:BSOD at night after closing laptop, ntoskrnl.exe 0x0000000A

It is caused by Netgear Geanie.

Either you may attempt to update it or you may want to uninstall it.

Let us know the results as per your decision.
________________________________________

Code:
........................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa8039769178, 2, 1, fffff80002edf035}

*** WARNING: Unable to verify timestamp for npf.sys
*** ERROR: Module load completed but symbols could not be loaded for npf.sys
Probably caused by : npf.sys ( npf+2bb2 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level... Read more

Read other 1 answers
RELEVANCY SCORE 58

Hi Guys,

I have a new pc here that has been built in the last 2 days. And when the machine has been idle it has blue screened twice with NTOSKRNL.exe errors (see attached) one with a 0x0000000a and another with a 0x00000109 error

Machine stats are

Asus P8z77 V pro
Intel i7 2700k
16gb ram
120gb ssd primary
2 x 1tb Raid 0
Windows 7 Sp1
Mcafee AV (used on indenticle spec machines)

A:Freshly built PC with 2 random NTOSKRNL.exe 0x0000000a & 0x00000109

Make sure you install the latest drivers from:ASUS - Motherboards- ASUS P8Z77-V PRO

Do not install any software apart from your drivers until you have it stable.

Also I would recommend Microsoft Security Essentials - Free Antivirus for Windows instead of mcafee.

Keep us posted

Read other 1 answers
RELEVANCY SCORE 58

I am getting the following message on a blue screen:

***STOP: 0x0000000A (0x73DFF7E0, 0x0000001C, 0x00000000, 0x804695BB)

*** Address 804695BB base at 80400000, Date Stamp 3ee6c002-ntoskrnl.exe

This message appears and then reboots my pc, and it seems to happen anytime i try to download things on the net, like cards and aol broadband for example.

Can you please help me?? Maybe someone knows what this error message means.

Thanks you so much in advance, I just really want to quickly solve this problem so I do not continue to get rebooted all the time.

Thanks again

Charlotte
 

A:Blue Screen with a Ntoskrnl.exe error

bump
 

Read other 1 answers
RELEVANCY SCORE 58

Dear Team

This is Mohammed, and I am from IT Dept, one of my user is facing frequent blue screen since morning,

please find the attached dump files and please let me know how to solve this issue.

I tried to debug the issue using windbg and I got to know about ntoskrnl.exe is causing the issue. please have a look the attached item

Awaiting for your kind reply

A:Blue screen appears (ntoskrnl.exe)

Please follow - Blue Screen of Death (BSOD) Posting Instructions

Read other 3 answers
RELEVANCY SCORE 58

Hey there, recently I've started getting BSOD's quite regullarly, most with different error warnings (IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT_IN_NOT_PAGED_AREAS, etc.)

I've attached the dumps and system health report.

My system is 64 bit, Windows 7 Professional, Full Retail (I built the computer myself), the system is about 4 months old, I previously had Windows 7 32 bit installed, however about a month ago I installed 64 bit Windows 7. The blue screens seem to have started after I performed a hack to relocate the Users folder (it's now located in my D:\ drive, rather than the C:\ drive where Windows is installed). This may however simply be a red herring, as it was slightly after this that the blue screens started.

Thanks guys!

A:Windows 7 Blue Screen - ntoskrnl.exe

Hi joenot443 and Welcome to the Forum.

I wouldn't advise to move the Users folders as there are many files/folders in there that are system based. Moving personal files/folders (Documents, Pictures etc.) should cause no problems though.

STOP 0x00000109: CRITICAL_STRUCTURE_CORRUPTION
Usual causes: Device driver, Breakpoint set with no debugger attached, Hardware (Memory in particular).

Your latest dump file lists memory_corruption as the probable cause. This usually indicates out of date Drivers or Bad Memory.
Old and incompatible drivers can and do cause issues with Windows 7, often giving false error codes.

As a Priority:

lmimirr.sys Tue Apr 10 23:32:45 2007.
LMIRfsDriver.sys Mon Jul 14 17:26:56 2008.
RaInfo.sys Fri Jan 04 18:57:14 2008 LogMeIn/RemotelyAnywhere. Has known issues with Windows 7. Update or uninstall this software.

Drivers with Updates:

Rt64win7.sys Wed Jun 23 10:10:45 2010 Realtek PCIe GBE Family Controller v7.040

Bugcheck Analysis:
Code:
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`02a0a000 PsLoadedModuleList = 0xfffff800`02c4fe90
Debug session time: Sat Mar 5 17:30:45.129 2011 (UTC + 0:00)
System Uptime: 2 days 20:04:03.503
Loading Kernel Symbols
...............................................................
........... Read more

Read other 8 answers
RELEVANCY SCORE 58

I have had a new rig for about three months now and during that time, in increasing frequency, I have been getting the 'DRIVER_IRQL_NOT_LESS_OR_EQUAL' crash error. I have tried unplugging various peripherals and updated all of my drivers in the hopes of discovering the route of the problem, all to no avail. The minidump file suggests that ntoskrnl.exe is the cause of the issue so I have run chkdsk in safe mode, but it appears to be doing nothing of any use. I have thought about running a repair install but I don't have my windows 7 disks so I can't.

I am running through an ASUS P5G41T-MLX motherboard with 8gb ram and an NVIDIA Geeforce GTX460 graphics card. I also run a Saffire LE external sound card.

I'm getting pretty desperate now as this issue is seriously impeding my ability to do my work. Any help and advice would be greatly appreciated.

Regards,
Ben.
 

A:ntoskrnl.exe is causing blue screen

Read other 6 answers
RELEVANCY SCORE 58

Hi,
I have encountered this problem quite frequently now:
When I am watching a video on Youtube or other online platforms after a while I get a blue screen that says DPC_Watchdog_Violation. It happens even 5 times per day and I have tried to update my drivers, to reinstall them but I didn't have any success. I
don't know what to do anymore. This laptop is relatively new ( 6 months) and I took care of it so I don't what the problem might be.
The most recent dump files are as follow: 
https://1drv.ms/u/s!AlfopMU3Rnz6gzfQ4bZMVE0sakds

Read other answers