Over 1 million tech questions and answers.

Error installing Windows 7 - error: 0x80070570

Q: Error installing Windows 7 - error: 0x80070570

Hello,

I am trying to install Windows 7 on my ASUS laptop. I tried different types of harddisks but it still does not work. Also I did a memtest.

I am booting the intallation from a usb disk.

Here a picture of the error:

http://oi59.tinypic.com/710a5d.jpg

Thanks in advance!

RELEVANCY SCORE 200
Preferred Solution: Error installing Windows 7 - error: 0x80070570

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Error installing Windows 7 - error: 0x80070570

How was the USB stick prepared? For Legacy BIOS use Windows 7 USB-DVD Download Tool
but for UEFI BIOS' you must use Option One from UEFI Bootable USB Flash Drive - Create in Windows and then boot the stick as a UEFI device.

Otherwise follow these steps to Troubleshoot Windows 7 Installation Failures - Windows 7 Help Forums

Read other 5 answers
RELEVANCY SCORE 92

I recently bought a new SSD ( Crucial MX100 512 GB)
and I wanted to install windows on it, but for the past couple days I've encountered the same error over and over.
Gyazo - cbdee771428da741b21b6b921a8230b5.png
I've burned the ISO on a disk and USB, both of them coming up with the same error. I've even tried a different ISO (Windows 7 Ultimate and Windows 8.1 Pro)
I have updated my bios and also unplugged and plugged back in my ram. I've practically tried everything that came up while googling this error.

A:Installing Windows Error 0x80070570

It's possible that the SATA drivers aren't recognized during the Windows 7 or 8 extraction portion of setup (In your BIOS may also need to be set with AHCI). Usually Load SATA drivers before actual install begins. May need to look for updates to the drivers at manufacturer's site of motherboard.

Make sure did it correctly look at these, something could be corrupt with ISO you made

http://www.eightforums.com/.../2227-create-bootable-usb-dvd-windows-8-iso.html

http://www.eightforums.com/.../18309-windows-8-windows-8-1-iso-download- create.html

Read other 11 answers
RELEVANCY SCORE 90.8

I've seen a lot of threads about Error code: 0x80070570 here, but none of the solutions works for me.

I posted on /r/techsupport earlier today:

https://www.reddit.com/r/techsupport...boot_from_usb/

Where I had trouble getting into the windows installer. I managed to get the installer going, but now I am getting an error message during the installation:

https://gyazo.com/cc6818f7667da1c11a66f360a712a0d3
Error code: 0x80070570

This happened after I formatted my drives; during the installation. I've tried to take out my RAM 1 by 1, but with no luck.
Running Windows 7 Ultimate x64 on a self-built desktop computer. Installing Windows 7 Ultimate x64 with a Kingston USB-stick "burned" with Rufus. This is the ISO I am using:

Download Official ISO's of Windows 7, Windows 8.1 or Windows 10 legally and for free - TechFleece

I have no access to a different Windows computer, only a MacBook Pro Retina. Nor do I have a different USB-stick or drive, so solutions which no not require any of this is appreciated. I am not the most computer savvy guy either, so keeping it simple would be nice

Thanks in advance!

Read other answers
RELEVANCY SCORE 90

So, I faced this problem 2 years ago, yet, I can't solve it.

A few years back, I've got a new Toshiba Satellite C850-B797 laptop. It came with Windows 7 64-bit, few months later I forced to format it and install a new Windows; However, since that time, I'm locked out of ANY 64-bit version of Win.

Though, ANY 32-bit version of Win will install without problem (WHY??).

The error code is 0x80070570
I've searched the internet and even did my personal research, but with no luck.

It just stops at 17% while installing, and gives that error.

What I've tried:
- Installing from 4 different USB sticks. (Couldn't use CD/DVD, the driver isn't functional).
- Trying different USB ports both 3.0 and 2.0
- Trying different SATA modes, both IDE and AHCI.
- Swapping out and removing the RAMs.
- Wiping out the HDD many times even with dban.
- Trying many ISOs and different Windows versions (7, 8, and 10).

Out of all of that, 32-bit installs perfectly, but 64-bit is NOT.

Why? What is the problem?
Thanks in advance for any kind of help.

Read other answers
RELEVANCY SCORE 90

So, I faced this problem 2 years ago, yet, I can't solve it.

A few years back, I've got a new Toshiba Satellite C850-B797 laptop. It came with Windows 7 64-bit, few months later I forced to format it and install a new Windows; However, since that time, I'm locked out of ANY 64-bit version of Win.

Though, ANY 32-bit version of Win will install without problem (WHY??).

The error code is 0x80070570
I've searched the internet and even did my personal research, but with no luck.

It just stops at 17% while installing, and gives that error.

What I've tried:
- Installing from 4 different USB sticks. (Couldn't use CD/DVD, the driver isn't functional).
- Trying different USB ports both 3.0 and 2.0
- Trying different SATA modes, both IDE and AHCI.
- Swapping out and removing the RAMs.
- Wiping out the HDD many times even with dban.
- Trying many ISOs and different Windows versions (7, 8, and 10).

Out of all of that, 32-bit installs perfectly, but 64-bit is NOT.

Why? What is the problem?
Thanks in advance for any kind of help.

A:Error 0x80070570 when installing ANY 32bit version of Windows

Stupid me....
The title says: "Error 0x80070570 when installing ANY 32bit version of Windows"
But my problem is with 64bit

Just changed it now.

Note: if you are still confused, my real problem is with 64bit versions.
The correct title is: "Error 0x80070570 when installing ANY 64bit version of Windows"

Read other 1 answers
RELEVANCY SCORE 90

So, I faced this problem 2 years ago, yet, I can't solve it.

A few years back, I've got a new Toshiba Satellite C850-B797 laptop. It came with Windows 7 64-bit, few months later I forced to format it and install a new Windows; However, since that time, I'm locked out of ANY 64-bit version of Win.

Though, ANY 32-bit version of Win will install without problem (Why?).

The error code is 0x80070570
I've searched the internet and even did my personal research, but with no luck.

It just stops at 17% while installing, and gives that error.

What I've tried:
- Installing from 4 different USB sticks. (Couldn't use CD/DVD, the driver isn't functional).
- Trying different USB ports both 3.0 and 2.0
- Trying different SATA modes, bith IDE and AHCI.
- Swapping out and removing the RAMs.
- Wiping out the HDD many times even with dban.
- Trying many ISOs and different Windows versions (7, 8, and 10).

Out of all of that, 32-bit installs perfectly, but 64-bit is NOT.

Why? What is the problem?
Thanks in advance for any kind of help.

Read other answers
RELEVANCY SCORE 89.2

While i am installing Windows 7 Home Basic 64 Bit on my SONY VAIO VGN-NW350F laptop i am getting the following error .

Windows Cannot Install Required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570.

I am getting error at installing Windows level.....while Expanding Windows Files at 5% it struck.

Formatted total HDD and given new partitions, No use

I have tried with 3 Different Genuine Windows 7 Disks but getting same problem every time.

Please provide me workaround or good solution to fix the problem.

Thanks In Advance
Shankar
9986680858

A:Getting Error code: 0x80070570 while installing Windows 7 Home Premium

Work through these steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums

Read other 3 answers
RELEVANCY SCORE 82.8

I get the error code 0x80070570 Everytime I try and install Windows 7. I am trying to do a custom install so it cleans out the computer. I have windows Vista Home edition and I am trying to install either Windows 7 Home premium. I have the requirements it takes to put windows 7 on a computer. You can post on this thread to help me or if you need to email me for some reason it is [email protected]
 

A:error code 0x80070570 When installing win 7

Read other 6 answers
RELEVANCY SCORE 82

I just received my new computer parts. Me being pretty much a newbie when it comes to computers, I got some help from two friends to build it.

Now, when I want to install my OS (win7 home premium 64 bit - CD bought from store) on my SSD, I get the error 0x80070570 - corrupt files during the "Expanding Window files" process. I have used that CD to install on my previous PC with no problem.

Thinking the CD was the problem, I downloaded a ISO and burned it with PowerISO. Tried installing and same problem happens.

Reading on the internet from multiple forums, some mentioned trying with a 2gb ram stick only. Not having a 2gb stick, i still tried removing one of them (4gb sticks).

Doing that i managed to complete installation until the "Completing..." part of the install, at which step computer crashed with a BSOD.

Here is a summary of things I have tried:
-2 different ISO
-Installing on my HDD
-Clearing CMOS
-Restoring BIOS to default
-Trying 1 stick of RAM (4gb)
-Transferring SSD on working computer, installed Windows, then transferred to new computer using Sysprep

Nothing of those helped me.

Recently I Flashed my BIOS with the most recent update (Z68BFC15.BST). I managed to install windows and drivers, but when i add my 2nd stick of RAM (total 8gb) computer won't boot (BSOD at windows loading page).

Is it hardware problems? If so how can i know which part is causing it?

Thanks all for the help

A:Error installing OS on fresh new computer (0x80070570)

Welcome to the forum Tamaraine
Take a look at the following thread, maybe it will be for some help:

Installing Windows Beta 7 Error Code: 0X80070570 - Geeks to Go Forums

Read other 3 answers
RELEVANCY SCORE 82

Hello,

I've recently built a new computer:

850w thortech psu
asus 990 fx sabertooth mobo
phenom II x4 965 @ stock
msi 7850 2gb
2x4gb g.skill sniper 1866
ocz vertex 3 ssd 120gb
seagate barracuda 1tb 7200rpm
RAIDMAX AZTEC ATX-619WB case

On first boot it went straight to bios which was great. I then attempted to install windows 7 home premium 64 bit, selected my ssd, and as it was expanding files it got to 13% and then i got the 0x80070570 error.

I read some of the other posts here about the error, most pertaining to ram. the easiest fix i saw was to just try a couple more times to install, but it kept getting stuck at 13%.

tried booting without ram, got nothing on-screen. tried booting with ram in again, nothing on-screen. tried rearranging ram, only putting one of the sticks in, etc. but still nothing on-screen.

my mobo has a few lights on it to indicate whether there's a problem with a certain component. at first i had none of these lights on, but now (ever since I took the ram out) the ram light is on whenever i try to boot (even with ram back in its original position when i could at least boot into the bios).

EDIT: Was able to boot into bios randomly, but only one stick of ram is recognized (4gb) and its at the wrong speed (1600 instead of 1866). tried installing windows again (custom obviously, then selected my SSD), got the same error during 'expanding files'. I'm assuming at least one stick of my ram is bad at this point considering that one of them isn't eve... Read more

A:error 0x80070570 while installing, now won't show anything on-screen

The error (x80080570 0r 1397) seems to indicate:






Quote:
The file or directory is corrupted and unreadable.


Could your install media be corrupt?

Be very careful moving RAM. In case you do not know, is it very susceptible to static electricity damage.

I suppose thinking the RAM was causing a problem could be a possibility. Running Memtest for an extended period might give you some information, but I would try another install DVD first.

I don't know much about AMD processors, but you do think the motherboard's bios is aware of yours?

Read other 3 answers
RELEVANCY SCORE 82

hello Experts ;  with an original Hp media wind 10 64 bit also with a new HDD , the install fails with the eroor 0x80070570 .  mother board was also replaced  , could someone help please ??  the problem is that it's a new HDD (first install ) the error occurs just after copying files ( at 4% of install process ) . so we don't have access to the OS to perform "reset this pc in wind 10 " and we don't have possibility to do a recover because no install was done before . i also tried with a well knowed working memory board and the result is the same just per info the uefi passed successfully and tried with a mini hardware config and always the same . the CD is original (HP media ) , i'm suspecting files that are not well copied from source .i read on some discussions that the DVD lens could be sometimes the root cause . could you please help ?  thanks in advance .

Read other answers
RELEVANCY SCORE 80

How can I resolve this common problem I have... unknown error during install of Windows Service Pack SP1 update ? I had to restore my older notebook to factory status and now this important update won't complete the install due to this error code. I also
can't update Internet Explorer browser from version 8. Can somebodey help me with these issues?

Read other answers
RELEVANCY SCORE 73.2

Hi,
I've just bought an Asus X201E. I got the linux version, because as a student I get a free MSDN copy of any Windows OS... Long story short, I've been trying both Windows 8 32/64bit and Win 7 32 bit, all of them dosplaying an error during unpacking system files in the installation process @32-42%. I've tried everything, switching the SATA mode to IDE, rebooting, switching flash drives, etc. Since there are X201E models being sold with Windows 8 I figured there would be no problem installing it? Help please, it's really driving me mad..

A:Can't install Windows 7/8, error 0x80070570

Welcome to EightForums.

All Linux code must be deleted using the CLEAN ALL command.As you have had linux on the HD you need do a Clean all & full format.

Clean the HD Drive, using Step one in this tutorial:
SSD / HDD : Optimize for Windows Reinstallation - Windows 7 Help Forums

Read other 3 answers
RELEVANCY SCORE 73.2

I tried installing Windows 7 64bit on my new build (new HDD) everything was going as expected, but when it got to about 10% "expanding files" I got the error msg in title. When I clicked "ok" it took me back to the "Intall Now" screen where I figured I'd click that again (no reboot) and went through the steps until I got to the "Where do you want to install windows?" part. However, it now shows to locations instead of just one.

Disk 0 Parition 1 System Reserved 100MB total 86MB free System
Disk 0 Partiion 2 596.1MB total 594.1 free Primary

Where do I go from here? BTW, it is the Full Retail version I just bought!

MB Asus P7P55D-E Pro
Intel i5 760

So much for my Saturday gaming fun:(

A:windows 7 install error 0x80070570

Hi -

Wipe the HDD completely with KillDisk -
- http://jcgriff2.com/0x1/killdisk_imgburn.html
- http://www.techsupportforum.com/2789807-post8.html

Try Windows 7 installation again.

Regards. . .

jcgriff2

`

Read other 4 answers
RELEVANCY SCORE 73.2

I keep getting error code 0x80070570
An unexpected error is keeping you from creating the folder. If you continue to receive this error,you can use the error code search to help with this problem

any suggestion to fix would be appreciated
Thanks
D

A:Need Some Help New To Windows 8 Error Code 0x80070570

When do you see this error message? Is it during install or while using Windows 8?

Read other 5 answers
RELEVANCY SCORE 72.4

I am trying to install Windows 7 on an HP Slimline s5220y with a USB installer I made from a Windows 7 ISO (I made the ISO from a working Windows 7 DVD). At around 25% through extracting the files, I get an error message with the error code 0x80070570. Any help is appreciated

A:Windows 7 Installation Error code 0x80070570

Hello and welcome Cave mate I think personally although fiddly using this tutorial and invoking the ie.cfg removal tool would be far less problematical as long as you choose the correct version for which you have the activation code for.

Clean Reinstall - Factory OEM Windows 7 it does also give info on doing it with a stick anyhow.

Read other 5 answers
RELEVANCY SCORE 72.4

Every time i try to install windows7 it shows 0x80070570 error.
my pc conf :- 2gb ddr2 ram, duel core processor , 500 gb hdd , os xp2,

A:0x80070570 error showing when trying to install windows 7 !!!!

What is the make and model of your PC?

Try going into bios drives change the drive to RAID Autodetect (ATA) if it is already set to RAID change it to AHCI. Hit F10 to save the changes the try to install Windows again.

Make sure you unplug any USB drives, only have your vga (Monitor) plugged in and your keyboard and mouse when installing Windows.

Try using the Windows 7 Advisor to see if your system is compatible with Windows before upgrading. The link or button is below the install button.

Read other 3 answers
RELEVANCY SCORE 72.4

Hello:

I had to replace the motherboard, memory and power supply on my computer because the old board was failing. The Computer kept shutting off without warning and would not stay on.

When I try to install Windows Vista Business Full Install, I get the following message and code:

Recovery Disk

Windows cannot install required files. The files may be corrupt or missing. Make sure all files required for installation are available, and restart installation.

Error Code: 0x80070017

Windows Vista Business Full Install Disk (I bought the full install version on 8/8/10)

Windows cannot open the required file E:\source\install.wim. The file may be corrupt or missing. Make Sure all files required for installation are available, and restart installation.

Error Code: 0x80070570

The Hard Drive is formatted. Can someone please be so kind as to what I can do to correct this problem. I am pulling out what little hair I have left on my head trying to install Windows Vista Business, so I can have my computer back.

Thank You

Ray Ramos

Lindenhurst, NY.

E-mail: [email protected]
 

A:Windows Error Codes 0x80070017 & 0x80070570

Read other 7 answers
RELEVANCY SCORE 72

First timer here, so please bear with me. Any help you can offer is MUCH appreciated!

Some of the files on my SD card have changed file extensions and appear corrupted (the modified dates are wonky and the file sizes are off). For example, a file that was formerly IMG_3324.JPG is now MG_3324J.PG, and I can't open, copy, or rename the file. When I try, I receive Error 0x80070570: The file or directory is corrupted and unreadable.

I have gone into Properties>Tools>Check. I receive the following: "We found errors on this drive. To prevent data loss, repair this drive now." However, when I click Repair Drive, I just receive the error, "There was a problem scanning and repairing this drive..."

Most of the files on the SD card are readable and work just fine. I was able to copy them to another location; however, there are about 60 or so corrupted files that I would like to repair (I don't want to lose the pictures!).

Also, any ideas what causes these errors? I want to make sure I don't repeat this in the future :-/

I'm running Windows 10, and the SD card is a Dane-Elec Proline 4GB card.

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, Intel64 Family 6 Model 78 Stepping 3
Processor Count: 4
RAM: 8084 Mb
Graphics Card: Intel(R) HD Graphics 520, 1024 Mb
Hard Drives: C: 237 GB (154 GB Free);
Motherboard: ASUSTeK COMPUTER INC., K501... Read more

Read other answers
RELEVANCY SCORE 71.6

Hey guys I just built a PC and tried to install windows 7 ultimate.
Specs:
-i5-3570k
-gigabyte ga-z68-ud3h b3
-8gb ram
-sandisk extreme 120GB ssd
-coolermaster 525W extreme PSU
Seagate 500GB storage drive

I first tried the DVD and got this error:

I assumed it was a corrupt DVD. I then downloaded the ISO from Microsoft and installed on a USB. I got the same Error. Re downloaded and reinstalled, same error. I looked online and found out it could be a ram error. Tried one stick, tried different slots, tried completely different brand of brand new ram, all to no avail. It always goes to 9% then gives the error. Any ideas?

A:Cannot install Windows 7 on newly built PC (Error 0x80070570)

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS: if UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with, or enable Legacy BIOS or Compatibility Support Module. Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY SIZE=102400 (for 100gb partition, adjust as desired)
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt.You are creating the partition here for the purpose of marking it Active which overcomes... Read more

Read other 1 answers
RELEVANCY SCORE 71.6

Windows 10 Repair Install Error 0x80070570 - 0x2000C

The installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation.

So, I want to do a repair install. Have tried many times and keeping getting this error.

I have run sfc /scannow, and Dism, both report no errors.

I have searched here, and tried the install using English and English International ISOs (extracted). Both report the same error. It appears on the first reboot, about 2% into the install.

The install is onto a SSD, which was migrated (a few months ago), using Paragon Hard Disk Manager.

Look forward to your replies, thanks in advance.

Read other answers
RELEVANCY SCORE 71.6

Hello,
I am working on a Dell Latitude D630 laptop. Intel Duo Core 2. Had Windows XP on it. Trying to install Windows 7 Ultimate (store bought). Tried to do a clean install. (Wouldn't let me upgrade from Win XP).

During installation, about 4 minutes into installation, I get the error
"Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570"

I tried another copy of Windows 7 Ultimate, which I know is good. Same error.

I swapped the CD / DVD drive, and still get the same error.

I ran Memtest x86 and am getting A LOT of errors with the memory.

Here are my questions:
1) Is the bad memory causing this error?
2) I found one memory slot, directly on the bottom middle of the laptop (2 screws to remove the cover). Where is the other memory located? It has 2 memory modules in it, and I can't find the other one!
3) Is there anything else that could be causing this error?

Thanks alot!

Ox

A:Windows 7 Ultimate Installation Error: 0x80070570... Bad Memory?

SOLVED! The memory was the problem. Also, the other memory module is underneath the keyboard.

Thanks!

Read other 1 answers
RELEVANCY SCORE 71.6

Error 0x80070017

keeps coming up when I install my windows 7 disk. I've used two different disks and the same error occurs, though at different levels of completion. I've searched the forums and come to the conclusion that either my memory isn't good for this board, or it is the hard drive that i'm installing to.

When I start it hangs at 0% expanded and about two mins later it gets to about 72% expanded and then the error occurs. The first disk i used only got to 39%. I've ran a memory diagnostic and currently have no access to a USB boot disk.

A:Windows 7 ultimate x64 - Error 0x80070570 Asus P5b, q6600

This is almost always an installer error. Where did you get Win7? Check HASH or download another ISO, burn to DVD or write to flash stick using Windows 7 USB-DVD Download Tool.

Boot installer using one-time BIOS Boot Menu key given on first boot screen. Unplug all other HD's and peripherals.

If this fails, wipe the HD first with Diskpart Clean Command accessing DISKPART At PC Startup.

Next reset BIOS to defaults in BIOS setup, set SATA controller to AHCI to try install.

Next test your HD using maker's HD Diagnostic extended CD scan, then test your RAM - Test with Memtest86+ for 5-6 passes. Remove all but 2gb RAM to try install, then swap RAM.

Read other 3 answers
RELEVANCY SCORE 70.8

Guys i have this problem with my Toshiba laptop:
Several days ago my com crashed..when i started my computer on the very beginning on start up screen when it says windows is starting i get a 1second blue screen with some saying and my laptop restarts by it self.
So,ok i have Windows 7 Ultimate installation dvd and i tried to install it,everything goes well untill on the second line of the very beginning of windows installation 98% i get this message Error Code:0x80070570
I've read some forums people were saying that this could be a RAM problem,so,ok my toshiba have 2 RAMS x 2 Gb..so i taked out 1 tried to install-same error,putted in another slot-same error,replaced and putted my other Ram Memory in the slots same again.
So,is there any solution how to fix this?i can see in bios that bios is reading my HDD,not sure if its working,does that mean that if BIOS is recognizing my Laptops HDD that works 100%???Could be something else causing that error code mentioned above??
Please someone respond and help me...THANK U IN ADVANCE

A:WINDOWS 7 Ultimate installation Error Code 0x80070570 problem!!!

Follow these steps exactly to Clean Reinstall - Factory OEM Windows 7.

Did Ultimate come with the laptop? Install only the licensed version using the Product Key on COA sticker.

Wipe the HD before install with Diskpart Clean Command

Read other 9 answers
RELEVANCY SCORE 70.8

windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570. This happens when im trying to do a clean install on a blank ssd - Samsung using windows 8 or windows 7 ultimate. My computer is an Avatar Pitbull gaming computer and you can find the specs here :

Newegg.com - Avatar AMD FX-Series 16GB DDR3 2TB HDD+120GB SSD HDD Capacity Desktop PC Windows 8 64-Bit Gaming PitBull

A:Windows cannot install required files. Error code: 0x80070570

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. (If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS. If UEFI follow these special steps for Install, otherwise enable Legacy BIOS or Compatibility Support Module to proceed with normal install.) Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here. Your installer is questionable so if it fails after one more attempt, try another ISO burned with tool in link, then try flash stick method.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. You are creating the partition here for the purpose of wiping the... Read more

Read other 7 answers
RELEVANCY SCORE 65.6

Aaaargh! I successfully installed the 32-bit windows 7 on my computer, upgrading it from windows XP. I spent an hour realizing how awesome the new OS is before deciding i needed to reformat to be sure i was rid of all spyware/malware. After trying to do the clean install, I keep getting the "Windows cannot install required files" error right when the install starts "expanding". It goes to 1% and then stops. I am installing this from an ISO off of a 4GB flash drive.
Here's what I have tried so far:
Redownloading and rewritting the flash drive (several times)
Updating the BIOS drivers
Restarting the installation without a reboot
Running chkdsk on the flash drive

None of these things have worked for me. I know that it has been suggested to set the hard drive (i think..) to SATA or AHCI, but this goes right over my head. Any help would be great

Is there anything else to try?

A:Error 0x80070570 Please help!

I had a problem like yours on a Dell. I had to flash the BIOS to get it to load Windows 7. I don't know if that applies to your problem but it is worth a shot.

Read other 9 answers
RELEVANCY SCORE 65.6

Hello,
I keep getting this error when I try to create or delete a folder. I also cannot use applications which create temporary folder such as WinRAR.
The error says this:
"An unexpected error is keeping you from creating the folder. If you continue receive this error, you can use the error code to search for help with this problem.
Error 0x80070570: The file or directory is corrupted and unreadable."
I tried all the possible options to solve this problem except for reinstalling the Windows.
Please help!

A:Error 0x80070570

I looked that up- It's an old error - From Vista days. Does this happen with WinRAR from every folder? It sounds like a permissions thing, but I would not mess with folder permissions in Windows 8 unless I had to. But you can make a "downloads" folder, and set the permissions to "Administrators" for that and see if it still happens. From there we can figure out were to go.

You can also try "unlocker" - You can get it at Major Geeks. It detects as a virus in some AV but it is safe. It has to take ownership of the object you use it on, sometimes AV apps detect that ability as a virus.

I dug around more, and it seems like this is a common problem when INSTALLING Windows 7 (And Probably Windows 8 as well as it uses some of the same installation steps).

The best I can find, is that you have some kind of Install process that never completed right, and it's still running, locking out access to the drive. That just from the bits and pieces of the discussions I found. There is no MS Technet discussion of it. Microsoft like to name and number these errors, just to identify that there have been 80,070,570 (80 MILLION) kinds of Windows Errors. They assign a 0x800... number but never tell you what the frell it MEANS.

Read other 1 answers
RELEVANCY SCORE 65.6

I get 0x80070570 error when setup is unpacking


I have read something about it and found some things that can be solutions:No USB plugged in (just tested - doesn't work)
No recovery partition (not tested, going to test)
2 GB memory instead of 3 GB
For the latest point I don't know if it will work, because I have 1GB+2GB memory and not 3x1GB. Does it work with 1x2GB?
I'm running clean install from upgrade dvd.

Does anyone have other solutions to this problem?
And do the points mentioned above work?

A:0x80070570 error ... :(

Yes, removing RAM sometimes works. Remove the 1GB stick and see if you can install. If not, move the 2GB to another slot and try again.

Read other 9 answers
RELEVANCY SCORE 65.6

Hi this is my first post

I have been usuing bitcommet to download some tv swhows and a few movies on my pc. things have always been fine...after i download them i transfer them over to a nexstar external hard drive. recently tho i have been getting an error when transfering files
The error is:

An unexpected error is preventing the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem:

error 0x80070570: The file or directory is corrupted and unreadable

Is there a simple way to fix this? I am not really good at working with computer but i follow direction well.
Thank you to all the people that take the time to read this and thank you for any help i may receive

A:Error 0x80070570:

Have a read here: http://forums.techguy.org/windows-vista/75...0x80070570.html

Read other 1 answers
RELEVANCY SCORE 65.6

Hello,

Im currently running Windows XP Home Edition 32-Bit and I just downloaded Windows 7 Professional Upgrade 64-bit. I downloaded the ISO from Digital River which was part of the ultimate steal for students. Then I downloaded the Windows 7 DVD/USB Download Tool and made a bootable usb drive with the ISO on it. I booted from the USB drive and the first part went fine. I chose install now then custom install and then installed it on the drive partition containing XP. It got to about 54% on "unloading files" before it gave me an error 0x80070570. It said the media was corrupted or something and said to make sure all the installation files were there and then restart again. So I tried again, no cigar. I dont really know what to do now!

As im typing this im re-copying the ISO onto the USB Drive a 2nd time to see if it will work now.

Thanks for any help

A:0x80070570 Error

Hi Solidsteel,

You are on the right track, by recopying across the installation media.
Here are some other avenues to look into should your fix not work. If it's possible, run check disk on both your Windows install drive and your usb drive. Also de-fragment both if you can. The error you mentioned is due to corrupt files; but at this early stage (without digging deeper) we don't know where the corruption is. i.e. It could be:Your win 7 install files might be corrupt (this you are now looking into by recreating the installation media)
Your usb drive may have a corrupt partition (run chkdsk /R /X from an elevated command prompt to fix)
The usb drive could be failing
Your Operating system hard drive could have a corrupt partition (chkdsk /R /X), or could be failing
Either drive may be too fragmented for windows to access the files quick enough

Also, can you please confirm if you ran the windows 7 upgrade advisor prior to installing windows 7?

Read other 7 answers
RELEVANCY SCORE 65.6

O.k. I have been trying to work through this for 2 weeks.
New HP7900 DC. No cards, only whats on the board. COre 2 Duo E8400 at 3GHz. Using 2mb stick in channel 1 only. Memtest x86 checks out fine. DVD and SATA HDD set to IDE. Digital river ISO's burned at 1x speed. USB drive failed. Created multiple USB's with the Microsoft USB burner on 64 bit machine as well. Installed 32 bit and downloaded MS Upgrade tool. Shows hardware is 64 bit capable. Not sure what else to do. Is there a preferred ISO that seems to work best? Halts at 27% Also tried the start on DVD switch to USB and the restart trick to no avail. I'm about ready to just say the heck with it and keep the 32 bit that came with the machine. Oh, I also reformatted the HDD.

Am I missing anything?

A:Another 64 it 0x80070570 error

Hi,

This sounds like a bad 64 bit ISO. Download a fresh copy from here and burn it to a 4GB USB2 stick using this.

Let us know how you get on.

Regards,
Golden

Read other 1 answers
RELEVANCY SCORE 65.6

hi all i have been getting a error message when transferring files to a flash drive the transfer get almost done and then 0x80070570 error can any on help thanks

A:error 0x80070570

Try:
http://windows.microsoft.com/en-US/w...sked-questions

Read other 2 answers
RELEVANCY SCORE 65.6

I am using a Intel Core Processor with Windows 7 with a business server. When I am attempting to copy a video (file extention .dvr) from a Micro SD card I recevie the following error:

"An unexpected error is preventing the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem:
Error 0x80070570: The file or directory is corrupted and unreadable"

This video file is very important and I need to be able to view and save on my computer. If anyone has any idea how to view this file or fix the problem it would be greatly appreciated.

Thank you in advance for your help.
 

A:error: 0x80070570

Read other 7 answers
RELEVANCY SCORE 65.6

I've had this flash drive for about a year and a half or something like that, and when I go to open a specific folder on it, a message comes up that says, "The file or directory is corrupted and unreadable. Error 0x80070570." I am able to open any other file fine except this one. Is there anyway to fix it?
 

A:Error 0x80070570

What operating system do you have? Windows 7?
 

Read other 3 answers
RELEVANCY SCORE 65.6

I'm trying to move music onto my micro SD 32gb card but an error msg keeps coming up of 0x80070570 and only xfers 29 of my 3021 songs.

Pls help
 

A:error 0x80070570

Move or copy? Try moving (or copying) smaller groups of files, maybe 3 or 4 folders at a time. This will give you a better insight as to whether a certain file is causing the error (ie. corrupted file), or if it's the micro card, with a bad spot or something on it (although this is very rare on an SD card).
 

Read other 1 answers
RELEVANCY SCORE 65.6

hi. I have 3 possibly related issues.

1- Recently I've had multiple cursor/arrow freezes after I close my laptop and reopen it. This requires me to go into Task Manager, close everything down and reboot.

2- I'm still use a hard drive based email (Eudora) and have large files . When I rebooted for a cursor freeze last night, I got this error "could not open the file c:\Eudora\in.mbx for writing. Cause: The request contains an invalid argument (22).? Every so often my mailboxes get too large and I have problems, and in the past I was able to create a new inbox.

3- When I tried to rename the inbox or cut and paste it elsewhere so as to create a new one, I got this message "An unexpected error is keeping you from renaming the file" and "Error 0x80070570: The file or directory is corrupted and unreadable."

I've ran System Mechanic several times and have had no issues other than these for the 2 years I've had my X1 carbon, running Windows 7.

Thanks.

A:Error 0x80070570

I'd run a chkdsk /r from the command line and see what comes up...sounds like a corrupted file. You do have backups of your data, right? If not, back up what you can before you start tinkering.

Read other 18 answers
RELEVANCY SCORE 65.6

Hello there..
How r U all? hope all the smart people are still on =P
I have been transferring pictues from my computer to my flash so far so good until I got an Unexpected Error 0x80070570 for more than 20 pictures.
What's going on?
Any reply would be highly appreciated
Thanks!

A:Error 0x80070570

Try reformatting your media card to FAT32. Lemme know...

Read other 5 answers
RELEVANCY SCORE 64.8

Been getting this error for the past few days. I have tried just about every recommendation I've seen on this error; Ive gone through 8 sticks of RAM, multiple ISO's and burns, USB install, different DVD drives, removing all extra USB devices, 2 video cards, multiple HDD's, canceling the install before it errors out and then restarting, all without luck. Anybody have any other ideas? Using a Maximus IV Extreme Z, no overclock.

A:Win 7 0x80070570 install error

Use 2gb of RAM for install. Test your RAM using memtest86 for 5-6 passes or overnight. Then when known good, test good stick in all slots to test slots: RAM - Test with Memtest86+

Where did you get the ISO? Try slow burning DVD at 4x speed with ImgBurn once you confirm the ISO hash against official Win7 HASH: Windows 7 RTM SHA-1 hash - checksums.
Win7 SP1 hashes are on TechNet Download page under details for each download and accessible even if not subscriber.

Next try writing ISO to flash using this simple tool with Win7 in dropdown: Universal USB Installer – Easy as 1 2 3 | USB Pen Drive Linux

Next check for BIOS update for mobo. If none, reset the CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS.
While in BIOS setup set SATA controller to AHCI to try install.

Next try wiping the HD for possible boot corruption: SSD - HDD Optimize for Windows Reinstallation

As a last resort, move HD to another computer to install. SysPrep install before moving back to problem computer: SysPrep to move HD to another computer

Read other 9 answers
RELEVANCY SCORE 64.8

Hello everyone, kind of new here but I am basically DESPERATE for help!When installing windows 7 Home Edition 64bit, my computer finishes the "Copying Windows files" in 1 second, and then goes off to the "Expanding Windows files" part. Once it is at 50%(every time), my computer says an error code and a message about corrupt files ect(Error code: 0x80070570). I have been struggling after trying to format my desktop for a clean install of Windows 7 Home Edition 64bit. Truly I have searched for solutions everywhere through these forums including the following:removing RAM(bad memory), changing modes from SATA to AHCI, cancelling the install and without rebooting restart the install, and putting down the graphics to 640x480. It has been quite a pain and ruined my weekend and I was hoping that someone else could propose a new solution since nothing has worked. Instead of using a cd, I am using a USB(changing boot priority in the bios to USB, changing the USB to NTFS format ect...), since I currently do not have a SATA CD reader. Any new suggestions would be great, Thanks! P.S: The specs of my computer if needed will be posted below: Intel Core i3 [email protected] eVGA P55v SLI 2x2GB OCZ Platinum DDR3-1600 9-9-9-24 1.35V Dual Channel Palit Sonic GTX 260 Western Digital Caviar Black 500GB 7200RPM 32MB Dual Proc SATA BIOS v02.67 If anyone needs more info please just inform me of what to add

A:Common Error(0x80070570) Help!

  
Quote: Originally Posted by ZeroGravity


Hello everyone, kind of new here but I am basically DESPERATE for help!When installing windows 7 Home Edition 64bit, my computer finishes the "Copying Windows files" in 1 second, and then goes off to the "Expanding Windows files" part. Once it is at 50%(every time), my computer says an error code and a message about corrupt files ect(Error code: 0x80070570). I have been struggling after trying to format my desktop for a clean install of Windows 7 Home Edition 64bit. Truly I have searched for solutions everywhere through these forums including the following:removing RAM(bad memory), changing modes from SATA to AHCI, cancelling the install and without rebooting restart the install, and putting down the graphics to 640x480. It has been quite a pain and ruined my weekend and I was hoping that someone else could propose a new solution since nothing has worked. Instead of using a cd, I am using a USB(changing boot priority in the bios to USB, changing the USB to NTFS format ect...), since I currently do not have a SATA CD reader. Any new suggestions would be great, Thanks! P.S: The specs of my computer if needed will be posted below: Intel Core i3 [email protected] eVGA P55v SLI 2x2GB OCZ Platinum DDR3-1600 9-9-9-24 1.35V Dual Channel Palit Sonic GTX 260 Western Digital Caviar Black 500GB 7200RPM 32MB Dual Proc SATA BIOS v02.67 If anyone needs more info please just inform me of what to add
... Read more

Read other 1 answers
RELEVANCY SCORE 64.8

Hi everyone. First post here because I?m getting really frustrated with this error message. Error code: 0x80070570. I?ve tried searching around on the internet for a fix but I?m not coming up with a lot that pertains to my situation. I am clean installing a copy of Windows 7 professional x86 on an HP DV6700 laptop. This is an actual release copy obtained through Microsoft store front download. Everything works great when booting from the DVD until it starts expanding files. It has gotten as far as 49% before giving the error. Always seems to be a random number, I?ve tried probably 4 times.
I am positive that the disc is not corrupt because I installed Windows 7 without any problems using the same disc on my desktop. I have deleted every partition on the HP except for the recovery partition it comes preinstalled with. My next option is to delete this too but I would rather not. Anyone have any ideas how to fix this issue?
I also have another semi-related issue that I would love input on if anyone has any idea. After Windows 7 was unsuccessful I attempted to recover Windows Vista using the recovery partition. Everything installed fine until it tried to reboot. Now I get an error message ?Missing boot manager? and only an option to restart the computer. I?m afraid this is going to happen even if I get windows 7 to install so any help would be greatly appreciated. Thanks!

A:Install error 0x80070570

Hello rjw24. Welcome to sevenforums.

Please inter your system spec`s. you will fin it at the left hand side bottom of your post.

0x80070570 error code means that a file or a dir is corrupted.

Have you ever installed window 7 in this computer before??
If yes, format the 100mb partition before reinstalling windows 7.

Read other 9 answers
RELEVANCY SCORE 64.8

first of all sorry for my bad English..

I have downloaded windows8 developerPreview-32bit-English (2.8 GB) successfully..
made a bootable USB and tried to install (fresh install).
when it comes to expanding files at 57% it gave error code:0x80070570 and tried again.
same error..
tried to install on VMWare, Virtual Box directly with ISO..
same error.
on the other system with different configuration..
and again same error..

so, i searched on google. only the solution there may be problem with ISO is to re-download ISO..
but my net speed is very very low (download sppeds upto 12 kbps).
i downloaded it 2.8 with great difficulties.. (took 5 days to download.)

i can't download it again..

is there any alternate solution like rebuilding the ISO with working files.
is it possible to know which files of ISO are corrupted and replace them with working files..

pls help...

A:error code : 0x80070570

Sorry, but your best bet is to redownload. good luck.

Read other 5 answers
RELEVANCY SCORE 64.8

Get this error code 0x80070570
cant remove any programs or files
Windows 8.1
HP PC

Read other answers
RELEVANCY SCORE 64.8

Hi Experts,

I have Dell 15r, which runs on win 7 home basic, i recently started using toshiba hard disk,
i have some files in the external hard disk when i try to move them or delete them i will get this kind of error message.

Error : 0x80070570 The file or Directory is corrupted and unreadable.

Kindly let me know how to delete or move these files.

Thanks in advance.

A:0x80070570 error says cant copy

You could start by running the Disk Check utility on the drive:

Start > Computer > select (highlight) the drive > right click & Properties > Tools Tab > Error Checking > Check Now > Check "Automattically Fix File System Errors" > Start.

You could also check "Scan and Attempt Recovery of Bad Sectors", but this will take much longer, especially on an external drive.

Most times I run the standard scan and then if it finds errors I run it with all options checked. But in your case you might just "cut to the chase" as they say.

Read other 1 answers
RELEVANCY SCORE 64.8

I am getting the error code 0x80070570 Everytime I try and install Windows 7. I am trying to do a custom install so it cleans out the computer. I have Windows 7 Pro OEM 32bit. I have the requirements it takes to put Windows 7 on a computer. I have tried two different discs same results. System is custom built, with Gigabit GA-H55M-S2H motherboar, Intel core i3, 4gb Memory, 500gb hdd. It gets past the part of coping files and then comes up with the Error code of 0X80070570. I have tried to install several times using two different discs and allways the same result.
 

A:Error 0X80070570 in WIN 7 Pro Install

Read other 7 answers
RELEVANCY SCORE 64.8

Hello everybody, I have already read lot's of 0x80070570 threads and I think my case is sort of different here. I'm using a ASUS P5VD1-X motherboard, Pentium 4 3GHz, 1Gb RAM, Geforce 7600 GS. I had success on installing Windows 7 first, but I had to format the computer short after because of a virus that disabled any antivirus and firewall. Then, when I formatted the computer and tried to install Windows 7, i just have this error 0x80070570 at 4% of Expanding data. The problem is not in the DVD, as i had it installed a short time before. I can't understand why can't I install it now! I tried disabling all USB ports but it didn't work. I do not understand a lot about hardware but I can find things out with a little time. Hope someone can help, thanks a lot.

A:error 0x80070570, i don't understand

so are you unable too boot to disk now? Do you have the option to "format" again?
were you using multiple partitions?

Read other 9 answers
RELEVANCY SCORE 64.8

I am currently on Windows 7 and am trying to upgrade to Windows 10 before the window closes.  I am receiving numerous errors that seem to be changing.  The current error is 0x80070570.

A:Error 0x80070570 updating Win 10

I recommend you to use the Windows 10 Media Creation Tool for upgrading.
Download the tool and use the ISO file.
https://www.microsoft.com/en-us/software-download/windows10?wa=wsignin1.0
If you don't want to do that you can run the System File Checker tool.
Start --> Run --> cmd and press the Enter button.
Type sfc /scannow
Then try to perform the upgrade process again.

Read other 3 answers