Over 1 million tech questions and answers.

I dowloaded a rar/zip files of 256MB however when i extracted is 3.58G what program c

Q: I dowloaded a rar/zip files of 256MB however when i extracted is 3.58G what program c

I dowloaded a rar/zip files of 256MB however when i extracted is 3.58G what program can was used to compress too much?

Preferred Solution: I dowloaded a rar/zip files of 256MB however when i extracted is 3.58G what program c

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: I dowloaded a rar/zip files of 256MB however when i extracted is 3.58G what program c

What was the extension of the compressed file and what types of files did it contain?

But it really isn't about the program doing the compressing but the data that is being compressed. Some types of files, such as many image files, are already compressed and any attempts at further compression will accomplish little if anything. Some file types, such as text files and some others, compress very well.

Read other 3 answers

When I try to open downloaded .pps files from the internet, I get a Microsoft message" Service profile is damaged. Please install service profile." I can save them but not open them.

How do I reinstall service profile., or what have I done to bring on this message, because I had no problem opening these type of files before ??

Thanks for your help

A:opening dowloaded .pps files

Welcome to TSG!
There can be several problems that can cause that error try these suggested in this MS article and let us know if they help. If not we will have to dig deeper.


Read other 1 answers

I used 7zip to open up a .gz zipped/archived file. It seems like 7zip extracts and downloads the files to open it? Is that correct? If so, where are the files located? Or is it just stored somewhere temporarily and then deleted after?

Read other answers

hey there - I'm really sorry if someone has already started a thread about this but as I'm not here that often, I could not find the right thread and I am starting a new one.

concerning the problem: I downloaded a file (tuxguitar actually) and wanted to install it, but thank god my laptop did warn me and I ran a virus check first (bit defender). bit defender told me, that there was a


in the file and I did not open it, bit defender also told me, that the file could not be disinfected but was instead moved (well, to where I do not know).

is there any danger now? what should I do?
I'm a lilttle scared as you read lots of nasty stuff about trojans (keylogger and so on) and I would be glad if somenone could help me with their expertise.

thank you so far

A:[SOLVED] dowloaded file - did NOT open or install it - virus program showed trojan -


Please note that all instructions given are customised for this computer only, the tools used may cause damage if used on a computer with different infections.

If you think you have similar problems, please post a log in the HJT forum and wait for help.

Hello and welcome to the forums

My name is Katana and I will be helping you to remove any infection(s) that you may have.

Please observe these rules while we work: Please Read All Instructions Carefully
If you don't understand something, stop and ask! Don't keep going on.
Please do not run any other tools or scans whilst I am helping you
Please continue to respond until I give you the "All Clear"
(Just because you can't see a problem doesn't mean it isn't there)
If you can do those few things, everything should go smoothly

Please Note, your security programs may give warnings for some of the tools I will ask you to use.
Be assured, any links I give are safe

Download and Run RSITPlease download Random's System Information Tool by random/random from here and save it to your desktop.
Double click on RSIT.exe to run RSIT.
Click Continue at the disclaimer screen.
Once it has finished, two logs will open:log.txt will be opened maximized.
info.txt will be opened minimized.

Please post the contents of both log.txt and info.txt.

Read other 10 answers

giving explanation of problem my best shot....example: I google for widgets find a pdf file download it to word by the process of both open and save. I open the document to nearly goobledegook, an occasional word, letter number in amongst strange symbols and small empty squares. The file type is always manihot. Maybe it also means something technical but I know the word manihot is the name of a tropical tree also called the tapioca tree, which I learned by googling some few months prior to every file type showing up as manihot. Coincidence or did I click where I should have clacked. Already (some) saved documents open up in the same "foreign language" This may sound silly but it is a fact and I am too old (65) to play games. any help would be greatly appreciated. thanks

A:dowloaded files undecipherable(cant read)

Word will not read a .pdf file. That is an Adobe Acrobat file. You can get the free reader here:
install it and then open the .pdf files. Any problems, post back and someone will help.

Read other 3 answers

I am unable to open pps files in my email.
When I click on download, it would give me the options to open from loacation, or save to disk. But when I save to disk and try to open, or if I only attempt to open file, I get an error message..."service profile is damaged. Install service profile".

This error does not occur if I double click on Internet Explorer, or Outlook Express.
I cannot find any files by the name of msn.cms, or msn.cmp to rename.

Where do I go from here ???

Thank you

A:problem opening dowloaded .pps files

do you have a power point viewer? if not you can get one from this post.


Read other 1 answers


Read other answers

When I extract files from a zipped folder, a folder is created but with no files in them. Yet, when I open a zipped folder, the files are visible but inaccessible. Help.

P.S. Running Vista Home Premium

Read other answers


I have winrar files and in them i have many many important pictures...

However when i extract these pictures it extracts but i cannot see the pictures the folder simply just says 'folder is empty' but it is not empty.. i know this because in properties it says contains: 139 files.....:?:?

anyone have an idea?

A:Solved: Cannot see my Extracted files?

Read other 7 answers

When I extract a file or video to desktop I can't find it.
I retsart the pc and the file or video pop up,it does this
almost every time.Any help?

A:Extracted files on desktop

download this 7-Zip right click file needing to be extracted, expand 7zip and click extract to and choose the same name as the file you are unzipping, unzipp's will be there...
vidoe pop up? what? need more facts not random statements...

Read other 2 answers

When I download large files like about 200mb upwards the download finishes fine but it does not unzip properly (file is corrupt) or if its an exe it says it is corrupt. It is not a problem with a particular file or a particular download source. I checked each of my partitions for errors, but still this problem is happening.

I think its my hard disk, what can i do to solve this problem. Its a recent problem its used to be fine 2 months back.

This problem seems to have started after I deleted my old partitions and created new partitions on my hard disk.
Edit: problem is with any browser that I use and also the same with bitorrent downloads

A:Dowloaded Files On My Computer Are A Lot Of Times Corrupt

I know of nothing that should result in corrupt downloads of any size.You might try: a. Dumping your cache. Internet Explorer 6 How and Why to Clear Your Cache - http://www.microsoft.com/windows/ie/ie6/us...clearcache.mspx b. Repairing IE. Repair Internet Explorer - http://www.updatexp.com/repair-internet-explorer.html Louis

Read other 3 answers

Hey Guys
I have a little problem. FILES from capturing screens and videos, extracting compress file etc. are NOT showing immediately, I need to refresh the directory folder just to see it.

For example:

I will extract the "a.rar" it contains "a"
After extracting, no files were added to my desktop
But when i refresh my desktop
The file is now shown

A:Delay Showing Extracted Files

This could be related to a corrupted IconCache.db file. Delete C:\Users\%username%\AppData\Local\IconCache.db and restart your computer.

Read other 1 answers

I don't know if other people had this problem but I have a folder that I need to extract but apparently when I extract it to desktop, I click on the folder and noticed some files were missing. I check the unextracted folder and all the files were fine.
I realized when I extract the folder to desktop, the files aren't actually deleting because they seem to be there in the unextracted folder but not there when I extract them.
the next thing I tried is extracting one file that gets deleted from that folder into the desktop and then nothing happens. So the main thing is that the files wont extract to the desktop for a weird reason. I use McAfee anti virus and I tried disabling
everything possible from it and extracted the file. But it didn't work; also i'm running Windows 10.
All I know is that this is probably not from my antivirus and it has to do something with the file not being extracted.

Please help me fix this problem ASAP as the internet has no good answers or no answers at all.

Read other answers

I have a 64-bit Windows 8.1 HP. It came pre-installed 7-Zip. When I extract it changes the file names automatically upon extraction.

On my old Windows 7 desktop I had WinZip and this never happened. So I purchased and installed WinZip on the Windows 8.1 and the same thing happened, it changed the file name automatically.

I have tried all over the net and on this site to find a solution but to no avail. I also compared WinZip settings on the W7 and I can't really tell if they are the same as it is different on W8.1

My real concern is that when I extract the folder, it changes the files names adding additional characters where there would be spaces and then an extension of numbers.
Windows 7 did not do this at all. Please help!!! How can I turn this off?
Original file name
Bride & Groom -7
Extracted new file name done automatically

Read other answers

anybody know how to solve my problem? i delete them but every time at startup the are there again and its cloging up my desktop.

(PS.Its probly a realy stupid question)

A:cant delete extracted files from desktop

The easy way is to use Move_on_Boot. Works every time!

Read other 2 answers

I would like to ask how to set WinRAR to exclude files with the exact filenames: 'thumbs.db' or '.DS_Store' (without the quotes, ignore case) from being extracted from an archive.

Ex. Files with these filenames should not be extracted:


while files with these filenames should be extracted:

Abcd thumbs.db.txt

In 'Settings->Security->Prohibited file types->File types to exclude from extracting', if I just type in 'thumbs.db .DS_Store' (without the quotes) in the field, will it work the way I described?

Also, does anyone know if WinRAR has a syntax guide for the Prohibited file types list in case I'd like to add more filenames or be flexible with the rules I need?

The reason for this question, is I'd like to not extract unnecessary files from ZIP, RAR or 7z archives in Windows 7 - files like Windows 2000/XP's Thumbs.db file (Thumbnail cache) and Mac OS X' .DS_Store file (Desktop Services Store), while not being too strict and also not extracting files which just contain 'Thumbs.db' or '.DS_Store' in its filename.

A:Setting WinRAR to exclude specified files from being extracted

Yes, it should work.

Here is a piece from WinRar 4.0 Help file

Files to exclude
File masks and file names to exclude from the archiving operation. Wildcards are supported both in path and name parts of masks. If you need to specify several masks, separate them by spaces. If mask contains spaces, enclose it in quotes. For example, you may enter:

c:\temp\info.txt *.bak *.tmp *\temp\

to skip c:\temp\info.txt file, all .bak and .tmp files, all temp folders and all files in temp folders. You may enter file names manually or use "Append" button to browse for file to exclude.

Detailed information about exclusion masks syntax is provided in description of switch -x. This switch uses the same format of exclusion masks as "Files to exclude" field.

Read other 2 answers

My girlfriend was on the computer for a bit (she isn't very tech savvy by the way) and when I came back on to open My Documents, all my folders were gone replaced by the files that were located in each and every one of these same folders. Is there a way to revert this or do i have to go through the time-consuming job of regrouping every files into new folders?

Thanks for the help


A:My documents' folders have disappeared and extracted all files.

Hello Tom, and welcome to Seven Forums.

Is this in your Documents library by chance instead?

If so, click on View -> Arrange by -> Folder to see if that may help.

File and Folder Arrangement - Group by - Sort by - Arrange by

Hope this helps,

Read other 3 answers

Hello to everyone!I need the BIOS image for the laptop Lenovo Yoga 500-15ISK. My laptop doesn't turn on and I want to re-program the BIOS chip with the latest BIOS firmware. I am a technician and it is easy for me to re-program the BIOS chip. Could you give me the extracted files of the D3CN35WW.EXE file please? Thank you in advance!

Read other answers

when i unzip a file using XP home's zip utility,on the last screen the option "show extracted files" is always checked by default. how can i permanently turn this off? tia.

Read other answers

Hello. Last year I installed one utility called Wrye Bash used to manage and install mods for the game Oblivion. This particular utility is distributed as a .zip archive, it has no installer. The installation instructions tell to simply extract the archive to the same installation folder where the game was installed. This archive contains folders and subfolders within it. Since July last year, I haven't used or updated Wrye Bash, and 75 new versions were released! Now I'd like to uninstall it first before installing the new version. Uninstalling wouldn't be necessary if the files to be extracted from the new archive overwrote all the files extracted earlier from the old version archive, but this doesn't happen for all the files: some of them are not overwritten. This brings me to this forum.

I'd like to know if there's any way to automatically uninstall (delete) all the files extracted from an archive. There must be a simple way to achieve this I'm not aware of. The hard way would be in Windows explorer to select each and every file in the destination directory which was extracted there from the archive, and then delete them. Is there any easier way to do this? Basically, I wish to know if there's any way to undo the extracting procedure, by automatically removing the files which were extracted to the destination directory.

I was hoping that converting the original .zip archive to a SFX archive with WinRar, I could then use this .exe SFX archive both to install (extract... Read more

A:How to "uninstall" files extracted from an archive?

Since I wasn't getting any replies here, I posted the same question above in Computer Hope Forums here and I got support there.
I don't know why, but I was not able to edit my own post above to correct a few things, I couldn't find the button to do it, although I can read in this same page under Posting Rules: ?You may edit your posts?. I even sent a message reporting that issue to the Forum Administrator, but I didn't receive any replies.

Read other 1 answers

When extracting files (I use PowerDesk), a checkbox for "remove extracted files from archive" is an option. What does this do? Should I check or un-check?

A:"remove extracted files from archive"

You are probally no longer wondering this question but seems since no one answered you I thought I would.

Read other 1 answers

Hello guys can anyone tell me the better card of the two thanks very much

A:Inno3D Geforce 6600 256mb Or Radeon 9800 256mb SE

Might want to post full specs of the two cards that you are looking at

Read other 1 answers

This is mainly to settle a dispute between a freind and i, but here goes.
I have an nvidia geforce FX5700 LE 256MB card and he has the Ati radeon 9800 pro 256MB card. We both agree eachother has decent cards for what we do with them.
However at a lan party a few weeks ago we could not settle on who has the better card even though my 5700LE scored better on pc mark and 3d mark with about 100-300 points advantage, but he still wont have it that i have the better card. So, to settle this were putting this to you guys and girls who may know more than we do. Any answers would be greatly apreciated even if you do disagree with me.
Thanx all

A:Nvidia fx5700le 256mb or radeon 9800pro 256mb??????

There must be a problem with your system because the 9800 Pro should beat the crap out of a 5700 LE. It even gives a 5700 Ultra a run for its money. More info here http://graphics.tomshardware.com/graphic/20050705/index.html

Read other 3 answers

I was wondering if anyone could tell me some info about these two cards... I currently use the Fx 5700 le (agp) I do know the "LE" stands for light edition so it is not the best on performance. I have had this card for awhile and am able to run games such as Lock ON, Need for speed most wanted IL-2 Sturmovic, MS flight sim.. For the most part performance is ok. I bought a new card on E-bay today and was hoping to find out if I did the right thing. It is a FX 6200 256 mb AGP. It was new in the box, and I only paid $20 plus $7 for shipping so I figured I would try it. Does anyone know anything about this card???

A:Nvidia Geforce FX 5700 le 256mb vs. FX 6200 256mb

I know the 6200 is one of the best PCI cards you can get, so yes, I'm sure you got a good deal. Actually a very good deal, in my opinion.

Read other 5 answers

...I just cant decide which I want,I dont plan on playing any very graphically demanding games,the most graphically demanding would probally be World of Warcraft,other than that I just wanna play a few 3D MMORPG's,the free kind you can download like FlyFF,Knight Online,Gates to Heaven...etc. and was wondering which is the better card?I want to say the x1300 would be better just because it came out so much later.Both are 64-bit and the x1300 has DDR2 RAM.Also dont take price into consideration,I would just like to know which is the better card.
Heres the specs for the 6200...http://www.bestbuy.com/site/olspage.jsp?skuId=7638292&st=6200+oc+256mb+pci&type=product&id=1130987962366
Heres the specs for the x1300...

Oh yea,my pc specs are
Intel Celeron 2.60GHz
512mb DRR 2100 RAM
250 watt PSU

A:6200 OC 256mb PCI or x1300 256mb DDR2 PCI?

The x1300 is a little faster, so I'd recommend it more. I have a pci 6200 128mb, which I got before the x1300 came out, and it isn't too bad considering it's a pci card.

Read other 2 answers

Hey there guys, new here, just wondering if someone can help me. I just picked up another 256MB ram to put in my system, the thing is that piece and the piece already in there refuse to work together! Seperately, they work fine, but they will not work together......they are K-Byte and IBM chips on a P3V4X mobo with Win XP. I have tried different slots, cleaned them out, changed stuff in BIOS, nothing will fix it. Thanks for any help,


A:2 sticks of 256MB RAM is only 256MB on P3V4X!!

Read other 7 answers

My computers are both running Win 7 64-bit. I am thoroughly confused when it comes to placing programs that I download into their proper folders: That is, program files (x86) vs program files. I have read stuff on this, but still confused. for the most part, even when a dl'd program suggests being installed into PF, I, for whatever reason, place it into PF (x86). Although I have read that placing the program into the wrong folder may cause the program not to work properly, so far I have not had this problem...nor any other problems that I am aware of. Could someone please set me straight on this issue?

A:Program Files or Program Files (x86)-Where to place downloaded program

I let the installer put it where it is supposed to.

If I trust the software I trust they know best where it should be installed/placed.

If I can't trust the software maker why am I downloading/installing their program?

Read other 4 answers

k so, i downloaded videos off of limewire that appear in the 'My Videos' folder every time i open my Itunes. i would like to get rid of the videos, what do i do?


Please refer to the TSG Rules, we don't assist with P2P issues (Limewire) or the issues they cause. You're on your own.

Read other 1 answers

i doenloaded something messing my computer up and have threat warning ,encosing hijack thisLogfile of Trend Micro HijackThis v2.0.4
Scan saved at 3:58:38 PM, on 9/15/2013
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\Program Files\AVAST Software\Avast\AvastSvc.exe
C:\Program Files\WinZipper\winzipersvc.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\Iaantmon.exe
C:\Program Files\Java\jre7\bin\jqs.exe
C:\Program Files\Malwarebytes' Anti-Malware\mbamscheduler.exe
C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe
C:\Program Files\RealNetworks\RealDownloader\rndlresolversvc.exe
C:\Program Files\Yahoo!\SoftwareUpdate\YahooAUService.exe
C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe
C:\Program Files\Common Files\Microsoft Shared\Works Shared\WkUFind.exe
C:\Program Files\AVAST Software\Avast\avastUI.exe
C:\Program Files\Common Files\InstallShield\Update... Read more

A:help dowloaded something cant get rid of

Read other 7 answers

The computer I have is a Dell Dimension 3000 desktop which is quite old. It only has integrated graphics so ive been wanting to upgrade them. The only available slots are PCI so my choices are sorta limited. I am also looking in around the $40-50 range which is why these cards seem to fit perfectly. (price wise at least) The Dell has only a 250 watt psu, so my first question is can these cards run on the standard psu, or would i have to upgrade it. My next question is which would be better for my system, with both being the same cost and all.

PNY VCGFX522PEB GeForce FX 5200 256MB 128-bit DDR PCI

SPARKLE SFPC84GS256U2LP GeForce 8400 GS 256MB 64-bit GDDR2 PCI

(i would post links to newegg but i dont have a high enough post count)

My System Specs:
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A01
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs)
Memory: 1278MB RAM
DirectX Version: DirectX 9.0c (4.09.0000.0904)
Integrated Graphics: Intel(R) 82865G Graphics Controller

A:GeForce FX 5200 256MB 128-bit vs. GeForce 8400 GS 256MB 64-bit GDDR2

What is your budget for the card?

Out of those 2 the 8400GS is better. But I'd recommend the 9500GT.

Read other 8 answers

Of course I wouldn't dl it on purpose, but I went to a website and missed a letter. Have to love those typo websites. :( Anyways, I thought it was firefox requesting an update. It said something about the firefox media player needs to update, so I just blindly clicked through the prompts without thinking. Not sure if that helps, but I realized something was wrong once it installed and nothing happened on firefox. It kept telling me to update and I didn't understand what happened, so like a moron I downloaded it again. This time when it did nothing I realized that there was a major problem and I imediately left the page. Now it has been 2 days and I'm already seeing a major issue in performance. Also it might just be my paranoia but it seems like it might be some kind of adware and thats possibly flooding my comp making it slow down. The reason I say this is because I'm seeing an abundance of banner ads that normally would not be there. Even as I'm loading a new page I see a flash of an ad and then it loads the page I was trying to get to. Didn't mean to ramble just trying to explain as much as possible. Please let me know if there is any more info that I can give you and of course thank you so much in advance for the help!

Also, I'm sure I didn't start this right, but I cannot read the first steps post. Evertime I click on it the thread opens and then automatically redirects me to mypcbackup.com. I can't read anything on the thread without this happening and I wont dl... Read more

A:Accidentilly dowloaded malware

Hello and Welcome to TSF.

If you haven't already, please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.


Download dds and save it to your desktop from here

Double-click dds to run the tool.

When done, DDS will open two (2) logs and save them to your desktop:

DDS.txt and Attach.txt


Please include the following logs in your thread:Contents of the DDS.txt posted as text in your reply.
Attach the Attach.txt to your post by clicking the Manage Attachments button under Additonal Options>Attach Files on the composition page. Browse to where you saved the file, and click Upload.

Download GMER Rootkit Scanner from here and Save it to your Desktop.Double-click gmer.exe to run it. If asked to allow gmer.sys driver to load, please consent .
If it gives you a warning about rootkit activity and asks if you want to run scan...click on NO.

Click the image to enlarge it

In the right panel, you will see several boxes that have been checked. Uncheck the following ...IAT/EAT
Drives... Read more

Read other 19 answers

Hi Gang,

I downloaded some kind of trash, I think it was a game or something, and my pc went into blue screen and now it won't boot into xp

I have a dual boot Win7 on C and Winxp on D. C and D are separate drives. Win7 works fine the problem only happens when boot into XP, which was the drive I downloaded the malware on. Here is my error message:

"Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:"

1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair you computer."

If you do not have disc, contact administrator or manufacturer for assistance.

Status: 0xc000000f
Info: The selected entry could not be loaded because application is missing or corrupt.

To fix this problem have already tried to restore a Norton Ghost 15 full system backup from three months ago. No Joy.

I have both system disks. and am using Constant Guard from Norton. It comes with my Comcast internet subscription.

Read other answers

iv bought driver detective and downloaded drivers iv extracted the files 2 a folder but cant figure out how to install them iv looked for anythinig with .exe but no luck im fairly new to this stuff. some1 pls help!

A:cant install dowloaded drivers

Read other 8 answers

dowloaded wallpaper from an email sent to me now this happened.
The internet seems very slow
Pop ups are very frequent
computer is making a lot of noise
computer randomly locks up

A:Dowloaded wallpaper from an email and now...

There may be a chance you've been infected by malware, so perhaps one of the malware specialists on here can work with you to check out your machine.

Read other 3 answers

Ok here's my problem

I have a acer aspire 5535 laptop with windows Vista 64bit. Something happen and I couldn't turn on my pc. It kept telling me to insert installation disc. The only one i could find in my house was the 32 bit vista. I didn't realize it was 32 until it was downloaded in my pc.

Now here's where my problem gets more frustrating:

My network and ethernet drivers are not being recognized. I tried reparing it. I got the name of the drivers and i downloaded them from my htc evo and connected it to my computer. It didn't recognize any of the drivers. I tried downloading both 64 bit (before i realized I had actually 32bit) and i downloaded 32bit.

I need some help please


Hi yankees90 and welcome to TSF

So you thought you had a 64bit OS, but it was actually a 32bit OS, and no 32bit drivers are working for your computer now on a fresh install?

Have you tried downloading the latest chipset drivers for your computer and installing them first and then the other drivers.

Looking at the specifications though, it doesn't seem to run Windows 7? Though sometimes you can still run 7 but use Vista drivers instead.

I would check though by downloading and running the Windows 7 Upgrade Advisor just to be sure.

Read other 4 answers

I downloaded a game from the net and I have gotten this message when I click to open it:

Windows cannot open this file:

Click to expand...

To open this file, Windows needs to know which program created it. Windows can go online and look it up automatically, or you can manually select from a list of programs on your computer.Click to expand...

It's a .uif file/program by the way. I don't know if that helps.


A:Problems opening up dowloaded game

The .uif extension is for a compressed ISO image. We don't support illegal copies of games. Please read the rules.

Read other 2 answers

Hi! I just downloaded 2008 Norton Systemworks Premier (yes, I know ppl dislike Norton but I've had no problem w/ it) but now I have a file on my desktop: NSWP01108I believe it is the file name that I downloaded, but I'm not sure. Anyways, it's not a shortcut, but the actual file itself and I just want to know if I can move it somewhere else so it doesn't get accidently clicked on, deleted, etc. Also, if so, how do I go about doing that.When I open it, it shows the following:FOLDERS:NAVNSWFILES:AutoRunReadMeSetUpNot sure if I gave enough info for anyone to help, but looking for advice anyways.Thanks for your time!

A:Just Dowloaded Norton Systemworks Premier

Hello 20nic. Please click on the following link and be sure to follow ALL instructions. Failure to do so can/will only impair our ability to help you.http://www.bleepingcomputer.com/forums/t/34773/preparation-guide-for-use-before-using-malware-removal-tools-and-requesting-help/P.S.: The reason why Norton is disliked so much is because of its unnecisarry use of RAM (It has Great potential to slow down your computer).

Read other 1 answers

I am trying to uplift our 32 bit Eclipse RCP application to 64 bit end state.In order to do that I have updated all the required dependencies and dlls. Also I am able to launch the application under 64 bit environment only when the application is kept anywhere
outside Program Files or Program Files(x86). When it is installed in the said location it could not be launched , a result view could not be created because it tries to write a search file in the place where it is been installed.

But the main problem is the same set of code works for 32 bit version no matter where it is installed. Also the 32 bit version of application can read or write result to any desired location without being launched as admin. And the 64 bit version of the application
does the same when launched as admin.

In order to find out more I tried with eclipse_mars_x86 and eclipse_mars_x86_64 with different location.When the workspace is
inside Program Files or Program Files(x86) 32 bit of eclipse can access it without being launched as admin but the same can not be done through 64 bit of eclipse, without launching it as admin.

The same behavior is
seen with sample RCP Application which I created  to investigate the issue . The 64 - bit version of the sample application , if kept inside Program
Files or Program Files(x86)  , is not launching(\.metadata\.locl(Access is Denied)). Where in for the same sample application built in 32 bit environment is working fine i... Read more

Read other answers

Hi have have a new PC running Win7 Home Premium 64bit. I have 2 drives:

1 x 120GB SSD (running the OS) (C Drive)
1 x 1TB HDD (D Drive)

The SSD is running the OS and a couple of main programs which i use quite often (ie. Office 2010, Antivirus, etc).

The HDD i want to use to install and run Games, iTunes, etc...

My question is, if by default installing programmes want to install to C:\Program Files or Program Files (x86). How to i make them install to D:\ and what file structure should i use to make sure the 64bit and 32bit are in the right file and run as they should at the correct bit version??

Is it just a case of creating Program Files & Program Files (x86) folders on D and navigating to these folders on install?


A:Program Files (x86) & Program Files Installed On Another Drive

you could try mounting the the hdd partition to your program files folder in your SSD.

I have never done this before and cannot say it will work properly. but its an idea.

Mount Drives or Partitions as a Folder

P.S. I would definitely backup your program files before trying that.

Read other 4 answers

I have a program installed under "C:\Program Files (x86)\CompanyName\SWName".
When the program runs it's supposed to copy some files, say
"C:\Program Files (x86)\CompanyName\SWName\Drivers\*.abc
"C:\Program Files (x86)\CompanyName\SWName\Drivers\*.xyz

The program works on every machine it's been installed on, except for one (customer's) Win 7 64-bit machine. On that machine, nothing happens.

It's noteworthy that on that same machine an "insufficient access privileges" (or some such) message pops-up when an administrator trys to copy a folder to "C:\Program Files (x86)\CompanyName\NewName".

Any guesses as to why this particular Win7 machine is being so picky? What should I have the installer do so that the application will be able to copy/rename its own files?


A:Allow installed program to rename files under Program Files (x86)

Try right clicking on the program installer and select Run as Administrator. See if that allows it to complete.

Read other 7 answers

Hi, I have Windows Vista Ultimate x64, and it came with 2 set of program files: program files, and program files x86. Since my hard drive is only 100 gigs, I was wondering if I could delete the normal program files and keep the x86 ones, or would that cause problems?

A:Deleting program files and keeping program files x86?

would that cause problems?

More than you know. You delete that and you delete any and all 64 bit programs, and probably also have to re-install Vista. That and if the Program Files folder on mine is any indication (just under 1 GB), then you're not going to save a whole lot of space anyway.

Since my hard drive is only 100 gigs

Better idea that trying to bugger Windows up, get a bigger hard drive.

Read other 3 answers


I do not work much with windows, but I do a lot of work in different distros of bsd and linux.

What I want to do is 'ln -sf c:\program files g:\program files' that is how I would symbolic link the folder in linux, but I can not figure out how to do this in windows.

I need this done so after the folder is moved to a new drive/partition all the Start Menu links still work, and also the short cuts.


A:Sym Link: Moving C:\Program Files\ to G:\Program Files\

not sure if this will work, but how about just creating a shortcut of the C:\folder on the G:\ , or vice versa..

Read other 3 answers

it started when i tried to download hitpro, my daughter has doj green dot virus on her laptop, when i tried to download it redirected and downloaded a download manager and a bunch of stuff. ran malware , took off some stuff but when restarted it came back . i ran combofix by mistake was looking for something i had downloaded before to take the conduit off my daughters pc. restored pc to prior date, still have conduit search on my pc and still need the hitpro for my daughters laptop. can you help me?

A:conduit search dowloaded when tried to download hitpro

Hello dinewland I would like to welcome you to the Malware Removal section of the forum.Around here they call me Gringo and I will be glad to help you with your malware problems.Very Important --> Please read this post completely, I have spent my time to put together somethings for you to keep in mind while I am helping you to make things go easier, faster and smoother for both of us!Please do not run any tools unless instructed to do so.We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability.Please do not attach logs or use code boxes, just copy and paste the text.Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post.Please read every post completely before doing anything.Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process.Please provide feedback about your experience as we go.A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same... Read more

Read other 19 answers


I have an app which downloads videos ( video downloader). It has worked fine up to recently. However,when I download videos now from many stations, the audio function does not work on the downloaded version.

Any ideas?

Thank you

Read other answers

hey my xp system is running slow, when i try to watch a video such as youtube it's jerky, i have high speed cable internet,used to work fine, I run ccleaner regularly, i have spybot search and destroy, adaware, and malwarebytes antimalware. running threatfire as a virus protection. i pulled a hijack this log, maby something at startup?

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 01:50:31, on 7/24/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)
Boot mode: Normal

Running processes:
C:\Program Files\Lavasoft\Ad-Aware\AAWService.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Raxco\PerfectDisk\PDAgent.exe
C:\Program Files\Google\Update\GoogleUpdate.exe
C:\Program Files\ThreatFire\TFService.exe
C:\Program ... Read more

A:computer slowing down and dowloaded videos jumpy

Hello and welcome to TSF.

HijackThis is no longer the preferred initial analysis tool in this forum.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a

Having problems with spyware and pop-ups? First Steps

link at the top of each page.

Please follow our pre-posting process outlined here:


After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Read other 1 answers

Hi, I just recently extracted some pictures and movies from my camera and two files came with a different extension. One has a .lcb extension and the other .lid? What do I use to open this? Thanks

Read other answers