Over 1 million tech questions and answers.

Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll ERROR

Q: Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll ERROR

Hello, i am having a problem i get
Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll

What im trying to do is formating my computer i restart my pc then i boot up xp cd, then it loads, and gets to say Starting Up Windows, cd stops, then goes black then blue and ntdll.dll error. I tryed reisntlaling windows, overwiritng file, please help!


(i have readed all the posts about this error to but that didn't help in my case.)

RELEVANCY SCORE 200
Preferred Solution: Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll ERROR

I recommend trying the free service from Zip Cloud. It's currently our users' favorite backup and storage solution and will save you headaches down the line.

You can get it direct from this link http://goo.gl/rFYDxc. (This link will open the Zip Cloud homepage.)

A: Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll ERROR

Quote:





Originally Posted by oshwyn5


Xceltron: It really would be helpful if you kept it all in one thread and told us all your symptoms.
I see you have more than one thread as well as asking for help in someone elses thread. THis makes it very hard to follow.

http://www.techsupportforum.com//mic...ard-error.html


http://www.techsupportforum.com//mic...ard-error.html

http://www.techsupportforum.com//mic...any-files.html



Let me start with analysis of this error.
http://aumha.org/win5/kbestop.php




If you are getting this error when trying to reinstall from your XP cd, then it sounds like you have a loose damaged or incorrect cable to either your cdrom or hard drive. I suggest replacing them both with quality 80 wire 40 pin IDE cables. It can also be caused by incorrect configuration if you have RAID or SATA drives.
Finally you may want to try with just one stick of RAM installed. If you have more than one now; you should try each in the slot nearest the processor all by itself until you rule out one of them being bad (If it works with one stick and not the other, you know the other is bad).

There is more information on possible causes of this error at ahuma ; but my first suspicion on seeing the image checksum mismatch is that the file in question has been replaced with something else, a trojan or virus.

Please download
Mcafee stinger multivirus removal tool
Install and run

Spybot search and destroy
Ad aware personal form Lavasoft
Install, update,run, check for problems , fix problems .
A Squared trojan remover
Download, install, update, scan and fix.
http://www.techsupportforum.com//sec...ijackthis.html
First Steps at Removing Malware and Posting a HiJackThis Log
We will handle moving your thread to the HijackThis Log board at an appropriate time. Please keep your replies in this one thread so that the entire history remains for review.

Geekgirls fixes
___________________________________________________________________________________________

On-line Scanners
Scan your pc with both of these free online scanners:
Panda ActiveScan
Housecall. Be sure to put a check the box beside AutoClean.
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

Download / Install / Update / and Run:
Adaware SE check for any updates before running it.
Get the plug-in for fixing VX2 variants. You can download it at this SITE
To run this tool, install to the hard drive, then open Ad-aware->Add-ons and select VX2 Cleaner. Then click Run Tool and OK to start it. If it's clean, it will say Status System Clean. Otherwise, you will have to click on the Clean button to remove the VX2 infection.
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

Download and install Spybot S&D . Run Spybot and click on the 'Search for Updates' button. Install any updates that are available. Next click on the 'Check for Problems' button. Let it run the scan. If it finds something, check all those in RED and hit the Fix Selected Problems button. Exit Spybot. If you keep getting the DSO Exploit entries, even after you updated Windows and fixed them, then download the Spybot DSO Exploit Fix and install it over the current Spybot installation.
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
Download and install: HiJackThis.

(Always create a Folder for HiJackThis anywhere but your Temp/Temporary Internet Folders or Desktop. A good place to make a folder would be in My Documents, as this is where it will save the backup files needed if there's a problem.)

Then doubleclick HijackThis.exe, and hit "Do A System Scan And Save Log". Make sure all Windows and Browsers are closed.
When the scan is finished, best to save your text file in the same folder as where you put HiJackthis.


Create a New Topic and include a fresh HJT log in HiJackThisLog Help Forum and Copy/Paste the info from your saved Hijackthis log file into your new topic.

A Moderator/ Security Team Analyst will give you instructions.


***DO NOT TRY TO FIX ANYTHING, MAJOR DAMAGE CAN BE DONE TO YOUR SYSTEM IF THIS TOOL IS USED INCORRECTLY, PLEASE WAIT FOR AN ANALYST/MODERATOR TO GIVE YOU INSTRUCTIONS***

Always describe your problem and any programs you have used to try to resolve your issue. Your description can go a long way to solving/repairing your particular issue.

Read other 9 answers
RELEVANCY SCORE 194.8

Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll

I get the above error while i try formating my computer. i restart my pc then i boot up xp cd, then it loads, and gets to say Starting Up Windows, cd stops, then goes black then blue and ntdll.dll error. Another error

Missing Operating System

I get this error when i try to start my computer.

I am using a compaq laptop......Please help me out.

A:Stop: c0000221 unknown Hard Error /system/system32\ntdll.dll ERROR

Hello ,

what you need to do is erase the harddrive then do the reinstall , you can get a free program that you can create a bootable cd to do this with from here

(http://www.majorgeeks.com/Dariks_Boo...uke_d4596.html)

or you can download the tools to do this from the manufacturer of the harddrive

either way you will have to make the bootable cd

make sur you read the instruction on the way to use the program

then start your system then put in the cd / reboot to load the cd and then erase your drive

depending on the size of your dive this can take from 1 to 5 hrs

this will write the drive to zero's and make it as if it never had software install on it ( like new from the factory)

Mike R.

Read other 2 answers
RELEVANCY SCORE 180

Hi I have a problem - my friend give me a compuer (HP pavilion zt 3000 if I remeber write, but it is not a big problem to know), wich restarts every 2-3 minutes if I do not use some downloading - it do not restarts when I listen e-radio - downloading music while I lisen it - all other ways restarts after 2-3 minutes.
Forgot to say that computer restarts untill I have to took out computer's battery if I do shut down it able to do it and restart again :(
What I have done to try fix it:
1) read in this forum some topics wiht same problem - but do not help me :(
2) I try to format windows xp professional with sp2 and sp3 and get ERROR:
STOP: c0000221 Unknown Hard Error/systemRoot/System32/ntdll.dll
3) Use spybot us here I read fix the problems - but teh problem still is :(

Change (buy) new hard drive 160 GB and try to format - the same - not work
Read about RAM sticks - here is a 1 big problem this computer is an old and has only 1 stick of RAM a took it out and try format - the same

What I need to do else to fix the problem ?

A:STOP: c0000221 Unknown Hard Error/systemRoot/System32/ntdll.dll

I noticed a solution still hasn't been posted for this problem. For STOP: c0000221 Unknown Hard Error/systemRoot/System32/ntdll.dll This can be caused by a number of things but usually a hardware conflict. To resolve a hardware conflict (if you know all the hardware in the PC is good and nothing is faulty), you can try disabling UltraDMA for the CD-ROM/CDRW Drive in the computer's system bios setup, usually found under Advanced Chipset settings, for the IDE interface, for whatever channel the CD Drive is on (i.e. Primary Slave or Secondary Master)... that worked for me. Restore Optimized Defaults in the system CMOS setup and then try disabling the Ultra DMA on the CDROM drive, then try the XP install again. Good luck!

Read other 1 answers
RELEVANCY SCORE 180

Just started my computer and I'm welcomed by a bsod with this message. The computer had started normally just before that, albeit the screen was flashing randomly. I assumed it was either the monitor or the graphics card so I rebooted but to no avail.

At this point it seems like my only option is a complete reinstallation of windows, however, I have about 500 gigs of Red footage on the hard drive that I would like to keep. Where should I go from here?

A:STOP: c0000221 Unknown Hard Error \SystemRoot\System32\ntdll.dll

Info on the STOP: c0000221 error: http://www.carrona.org/bsodindx.html#0xC0000221

Since there's a hardware component to this error, please run these free diagnostics:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
http://www.carrona.org/memdiag.html (read the details at the link)
http://www.carrona.org/hddiag.html (read the details at the link)




Please let us know the results and we'll be better able to advise you on how to proceed.

Read other 1 answers
RELEVANCY SCORE 180

I was given 5 laptops that came from a sale of equipment from a school, all had passwords to get into, but they wern't provided. So I did a re-install, and I get this error code. I've used 3 diferent setup disc's, and always get this, how do I fix this?

A:STOP: c0000221 unknown Hard error\systemroot\system32\ntdll.dll

Here's a Microsoft tech article on the stop error. You might also want to try running Chkdsk /r on the drive or go to the hard drive manufacturer's website and download one of their diagnostic utilities and run it.

Read other 3 answers
RELEVANCY SCORE 165.6

"stop c0000221 unknown hard error systemroot\system32\ntdll.dll" while trying to install windows xp

A:"stop c0000221 unknown hard error systemroot\system32\ntdll.dll"

most likely a bad ram module or to aggressive timings

but first do a complete error check on the disk along with a virus/spy scan

read this

post back with the results

Read other 4 answers
RELEVANCY SCORE 156

I have Windows Vista Home Premium. During a boot, the computer displayed a blue screen of death following 30 seconds of the green loading bar. I get this screen saying:

STOP: c0000221 Unknown hard error \systemroot\system32\ntdll.dll

Followed by a memory dump. I have tried to get into safe mode and tried doing a repair using the Vista DVD but soon after the green bar, I get the same blue screen error. I am running out of options. Please help!!!

I would really appreciate any input.

Please note there have not been any changed in hardware, no new devices or drivers have been updated in the last month. Windows did however install a couple of updates.

Thanks!

Read other answers
RELEVANCY SCORE 148

Hello, I recently ran a repair on my system using the windows xp professional re-install disk. Everything appeared to run fine but then my computer started to do weird things. One of the things that it is doing is saying "setup is restarting" and taking me back to the place where the installation is finalized and never finishing.

I have tried booting with the windows xp disk to try and remove the windows installation but I get this error, Stop: c0000221 unknown Hard Error /system/system32 ntdll.dll. Basically what it does is say "starting windows" for a few minutes then BSOD'ing me.

I have read about the possiblility of using an ASR floppy but unfortunately I never heard of it or backed up onto a floppy before learning about it. Is there a way I can use someone else's computer to create a floppy and hope it works?

A:Stop: c0000221 unknown Hard Error /systemRoot/system32

Is this post in the right section?

Read other 2 answers
RELEVANCY SCORE 128.8

I have an ACER TravelMate 4500 and am receiving the c0000221 Unknown Hard Error \SystemRoot\System32 error on boot up. As a result the laptop does not boot into Windows. I cannot boot from CD, because the CD Drive has not been working for some time. Is there anything that can be done to help?
 

A:c0000221 Unknown Hard Error \SystemRoot\System32

You can try to download BartPE and place it to usb key if you have.
Try this link for more help --> www.tomshardware.com/reviews/windows-pocket,1113.html
 

Read other 2 answers
RELEVANCY SCORE 126.4

I am receiving "STOP: c0000221 Unkown Hard Error \SystemRoot\System32\ntdll.dll" and my Gateway MX 6455 laptop will not boot. I've tried to boot it in safe mode and also to boot it from the installation disc but it will not boot. The software I am running is Windows XP Media Center Edition 2005.
Any help would be greatly appreciated.

Note: The laptop was not booted down after the last use. This error just popped onto the screen while the laptop was on, it did not happen while trying to boot.

Read other answers
RELEVANCY SCORE 126.4

hi, name's joe...i have this problem while i was reformatting my computer...this line poped out.
STOP: c0000221 Unknown Hard Error
\SystemRoot\System32\ntdll.dll
...can you please help me 'bout this problem? thanks...

A:STOP: c0000221 Unknown Hard Error

Hi chaos13


Here's the MS Knowledge Base article for your error --- http://support.microsoft.com/?kbid=314474&sd=RMVP

I would imagine that you weren't reformatting the entire PC, as Windows XP wouldn't be installed yet to provide you with the error (unless you were booted into a pre-installation environment).

The MSKB article is pretty straightforward -- file corruption, incorrect drivers, hardware failure or misconfiguration, or networking issues can cause this. That's a fair range, so if you made a recent change just before receiving the error, start your troubleshooting there. If the errors continue, even after a reinstallation of Windows, you'll need to run hardware and network diagnostics.

Best of luck
. . . Gary

Read other 2 answers
RELEVANCY SCORE 126.4

Basically, my computer wont start up, it hangs before it even gets to windows and restarts itself.

I tried repairing/using the Windows installation cd, and it boots the cd, but half way through at

"Setup is starting windows", it hangs for a min or 2, then blue screen and this error message

"STOP: C0000221 Unknown Hard Error
\SYSTEMROOT\SYSTEM32\ntdll.dll"

Any ideas suggestions on how to get round this / fix the problem ?

p.s (I'm aware of the other major thread like this, but I couldn't find an answer for my specific problem in it).

Thanks,
Harry

Read other answers
RELEVANCY SCORE 122

unknown hard error systemroot\system32\ntdll.dll when installing windows

help pleasee!!!!!

A:unknown hard error systemroot\system32\ntdll.dll

First and most important, WinXP or Vista?

Second, running Setup CD for installing...on a clean HD?
OR installing on a HD with Windows already installed?

Read other 2 answers
RELEVANCY SCORE 120.8

Hi all, yesterday on startup my pc BSOD'd, I wasn't quick enough to get the error codes, I tried rebooting a few times but no lock, I tried to boot in to safe mode but still BSOD'd, now I do not even have the option to start in safe mode, only start windows normally or launch recovery, the recovery console also BSOD's.
I thought put in the win 7 disk that'll sort it, no luck, it says loading files for a few minutes the i get a blue screen with the error;
stop: c0000221 \systemroot\system32\ntdll.dll
Have done a bit of googling and I have found everything from just a corrupt file to HDD is failing.
The only recent change to the system was the installation of filezilla FTP.

Any thoughts on what it could be or what I should do would be most appreciated.

Is there a way for me to get the crash report without loading windows?

Thanks,

A:BDOD, stop: c0000221 \systemroot\system32\ntdll.dll

  
Quote: Originally Posted by DxxS


Hi all, yesterday on startup my pc BSOD'd, I wasn't quick enough to get the error codes, I tried rebooting a few times but no lock, I tried to boot in to safe mode but still BSOD'd, now I do not even have the option to start in safe mode, only start windows normally or launch recovery, the recovery console also BSOD's.
I thought put in the win 7 disk that'll sort it, no luck, it says loading files for a few minutes the i get a blue screen with the error;
stop: c0000221 \systemroot\system32\ntdll.dll
Have done a bit of googling and I have found everything from just a corrupt file to HDD is failing.
The only recent change to the system was the installation of filezilla FTP.

Any thoughts on what it could be or what I should do would be most appreciated.

Is there a way for me to get the crash report without loading windows?

Thanks,


You dont have to do a clean install but you will have to do a repair install. Do you have the win 7 dvd?

Read other 9 answers
RELEVANCY SCORE 119.2

Enountered a BSOD that said something along the lines of "Unknown Hard Error" with the code in the title followed by the path: \systemroot\system32\ntdll.dll
It then said something about dumping physical memory to disk. I encountered this BSOD after I purposely powered down my machine and it had been turned off for a couple of hours.

All help is greatly appreciated.

p.s. I encountered an unhandled exception error when trying to run the SF diagnostic tool so I hope it completed sufficiently.

Thanks!

A:BSOD with error code "Stop: C0000221 Unknown Hard Error"

Your latest dump says ....

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80072be3d8, 0, 0}

Probably caused by : hardware

Followup: MachineOwner
---------
Follow the steps stated in Stop 0x124 - what it means and what to try.

Read other 5 answers
RELEVANCY SCORE 106.4

Well ... i installed the RC2 for 4-5 times, without any problems, BUT since Friday i can't finish the Installation. The first boot, after the files has been copied to the HDD, i get these Blue Screen.

STOP: c0000221 Unknown Hard Error
\SystemRoot\System32\ntdll.dll

I allready tried, to format my HDD, to delate the patitions and i also format the hdd with low-level tool provided by fujitsu. No luck....

Any ideas? Win XP works fine!

p.s. i have a notebook.

A:C0000221 Unknown Hard Error

I'm presuming that the Vista BSOD's are similar to the XP one's - if that's the case, here's a link: http://aumha.org/win5/kbestop.php#0x221Indicates driver problems, system file problems, disk corruption problems (such as a damaged pagefile), or faulty memory hardware.As such, I'd run chkdsk, recreate your pagefile, run MemTest86, and then start looking at your drivers.A look at the Event Viewer may enable you to associate a file name with it. Or, a search of your hard drive for .dmp and .mdmp files may lead to more information. If you find the .dmp/.mdmp files - here's a link on how to analyze them (all of this works in XP - I haven't tried it in Vista): http://forums.majorgeeks.com/showthread.php?t=35246EDIT: Oops! I didn't notice the ntdll.dll file, nor the comment about XP working. That probably rules out the hardware stuff. I'd still run chkdsk on the volume that you're installing Vista to and then would start with your drivers.

Read other 1 answers
RELEVANCY SCORE 106.4

Ummm 1st of all i'm running on 2 operating systems 1st is XP Sp2 & 2nd is Ubuntu but my problem is

My WIn Xp freezes after the welcome screen only mouse moving around & no Icons & no even ALT + CTRL + DEL ( Task Bar ) working nothing working :S

& If i try to format Or Install anew xp it freezes after reading This

( SETUP IS STARTING WINDOWS ) & it turns to Dark blue screen with this msg in it

" C0000221 Unknown hard error
Systemroot/system32/ntdll.dll "


What can i do ?!! i cant even reach my hard partations to format da C drive so i can reinstall my XP Using my bootable XP CD :(

I tried removeing any usb's enhancments & switching my Master Hard with the Slave one i keep getting dis msg too :( I need help

& thanks in Advanced

A:C0000221 Unknown Hard Error - I need help

Hello Yukuzo, Welcome to TSF!

To rectify this problem firstly you will need your Windows? XP SP2-CD.
(Recovery discs are not recommended with this procedure.)


Enter the Recovery Console (with the Windows?XP CD in the CD Drive), and enter the following command, to rename the file...

ren c:\windows\system32\ntdll.dll ntdll.bad > ENTER

While you are in the Recovery Console, it might also be wise to run an error check on the HDD; try this command...

chkdsk /r > ENTER

Post back with the results.

Kind regards,

Read other 2 answers
RELEVANCY SCORE 105.2

I have a dell computer with window server 2008 R2 enterprise. I need to install window xp professional in dual with window server 2008 R2 . when I insert win XP CD, it starts & display an error c0000221 unknown hard disk error. IS there any one to help me.

A:c0000221 unknown hard disk error

Hi and welcome to TSF this is about your error "Stop error code 0xC0000221 (STATUS_IMAGE_CHECKSUM_MISMATCH)" error message occurs
are you trying to install xp on a sata hard drive

Read other 2 answers
RELEVANCY SCORE 105.2

My wife has had this laptop for about 18 mo now with only a few minor wifi problems. Today, I replaced her 512MB memory with 2 GB which seemed to work fine. She used the laptop for about an hour and then said the memory upgrade had not fixed her wifi flaky connectivity problem. After some research, I learned there was a new driver from BroadCom to address these issues, downloaded it, installed and rebooted her laptop. Everything worked for about 10 minutes then I shut it down. Next time she rebooted it, Windows Logo came up then a blue screen with "STOP: c0000221 unknown Hard Error \SystemRoot\System32\ntdll.dll" and then automatically rebooteds. It then gets the Windows has shutdown abnormally screen and you have to select Normal Start, etc. No matter what I select, the same sequence starts over.

Thinking it might be the memory, I reinstalled the original memory but that did not fix anything. After reading the many similar messages here on Tech Support Forum, it seems it may be a bad ntdll.dll file or maybe the new driver for the WiFi card is acting up.

What is your recommendation to try and recover this system without destroying all the apps and data? We have data backups, but the application reloading and setup is a real PITA. Remember, I can't even boot this system in Safe Mode, so where do I go from here? thanks Don

A:HP DV6000 c0000221 unknown Hard Error

What windows operating system are you using?......and do you have the original

cd installation of windows?

Read other 4 answers
RELEVANCY SCORE 98.4

Hey. My friend gave me his laptop, because he said he was getting a strange error. He has a Dell Inspiron 9300, running some version of XP, and that's all that I know.

When you turn on his computer, you see the Dell startup-screen for a second, and then it automatically brings you to the prompt that says "We apologize for the inconvenience, but Windows did not start successfully...." window. There are obviously 5 options: Safe Mode, SM with Networking, SM with Command Prompt, Last Known Good Configuration, and Start Windows Normally. Each one of those brings me to the blue screen that says:

STOP: c000021 Unknown Hard Error
\SystemRoot\System32\ntdll.dll

I searched on other forums, and it seems that this is what people have done to fix this: either try to Repair Windows, reinstall Windows, manually replace ntdll.dll (if they can actually get into Windows, which I can't), or do something with their memory cards, I'm not sure what.

So here's my question: first of all, are those approaches I listed correct? And 2nd, I don't want to have to mess with my friend's memory if I don't have to...I'm not too much of a tech person. I do, however, have my family's Windows XP Home Edition install CD with me....if I put that into his computer, and try to repair Windows, would that work?
Thanks for the help...if you need any clarification, I'll be glad to give it.
 

A:c000021 Unknown Hard Error: ntdll.dll

Read other 7 answers
RELEVANCY SCORE 96.4

hey I have a mediocre system on Windows XP home edition SP1 and yesterday I ran into a problem. I wasn't doing anything special, I was downloading some stuff off IRC and a p2p, and I tried to start up internet explorer and the whole system crashed. When I tried to boot up the computer again, the computer went through its regular bios, but then during its load up of xp a blue screen appeared with the following error message:

Stop: c0000221 Unknown Hard Error
\SystemRoot\System32\ntdll.dll

I continue to recieve the same message on every attempt I have made to boot up my computer, including safe mode. Any Ideas?

A:[resolved] ntdll unknown hard error, can't start up computer

Hi,
Try your ram...if you have 2 sticks try each one seperatly... if error still occurs try power supply.....

Dermo...

Read other 9 answers
RELEVANCY SCORE 89.2

Thanks for all your help in the past. I've got a new problem. My computer gives me the following BSOD error: stop: C0000221 {Bad Image Checksum} The image shlwpi.DLL may be corrupt.
Once this happens the hard drive is frozen and computer stops responding. This is a sata hard drive system with no floppy drive, using Windows XP Home. I have inserted the OS disk and tried to Repair and nothing happens. In fact the usb keyboard stops functioning.
Help!
 

A:BSOD: Stop Error c0000221

check this out , may be of some help
http://support.microsoft.com/default.aspx?scid=kb;en-us;326687
 

Read other 3 answers
RELEVANCY SCORE 88.4

I'm hoping someone can help me I am getting a blue screen error that reads stop:c0000221 {bad image checksum} The image urlmon.dll is possibly corrupt. The header checksum does not match the computed checksum. I have not been able to get into safe mode nor will the installation c/d boot...i did change boot sequence but still no luck. I'm average user with no I/T knowledge but am able to follow directions...please feel free to talk as simple to me as possible! Thanks in advance for any help, of course i haven't done a backup lately and really don't want to loose my info.
 

A:blue screen error stop:c0000221

If you dont mind spending a little, this program will completely fix your problem>>

http://www.grc.com/spinrite.htm
 

Read other 2 answers
RELEVANCY SCORE 87.2

getting a blue screen with this error code could anybody tell me what could have caused this error i am installing from a brand new windows xp pro disk when it gave me this error.
 

A:Solved: Stop error c0000221 {image checksum}

You can get info on this error from here - i would physically disconnect any unnecessary hardware and retry the instal

http://support.microsoft.com/kb/314474
 

Read other 3 answers
RELEVANCY SCORE 86

I have recently been unable to run an antispyware program (Noadware) except in Safe Mode. I had no trouble with this program in the past. When I attempt to run it in Normal Mode, error messages appear but the screen turns blue before I can copy them. When the screen turns blue, I see the message "Stop: d0000144 unknown hard error." Whenever this happens and I restart my computer, I notice that a new version of windowslogon.exe has been entered into the Windows pchealth folder.
My antivirus program (ZoneAlarm)and my other antispyware program(Zone Alarm) do not indicate any infection or malicious software. I tried using RegCure, which cleaned up the registry but did not solve my problem. Aside from this problem, all other programs are functioning normally.
I would appreciate any help.

A:STOP: unknown hard error

Hi

Firstly please don't use a supposed "Reg Cleaner". It will usually make matters worse.

In order to get more details please do the following:

Go to start | search (type in) .dmp
Note the location of your .dmp files.
If there are no .dmp files then Search for: minidump
Remember this location and the path that leads to it.

(OR my way is go to C:\WINDOWS and then search for Minidump and if it has files in it)

Then:
1) Download and install the Debugging Tool from Microsoft

All you need do is download and install this. Make no attempt to start or run it.

2) Download and install this debugwiz.zip

This is a DOS based batch file that will command the above Microsoft Tools.

3) Open the Debugwiz & Browse to, or paste in the path to, your .dmp file.
4) After the Wiz creates a Text document attach it back to this thread using Advanced Reply>Manage Attachments, as found here:



If you find more than one dmp or mindump file, then analyze separately the latest 3 ones (look at properties for the date) and attach their output logs back.

If you are looking for links on how to interpret this data for yourself try here first: http://www.wd-3.com/archive/registercontext.htm

Read other 12 answers
RELEVANCY SCORE 85.2

Hi,
I've seen posts here on this particular topic but I haven't seen anything related to the problem I had.
After a windows update occurred, my laptop crashed. I started getting the following errors:
crcss.exe
Windows Explorer
Win32

In addition, immediately after that, I will get the blue screen of death.... STOP:d0000144 unknown hard error.

The reason I am writing this is because I actually was able to fix my problem, and though that someone out there might be facing something similar and still not able to fix the laptop. In addition, I would like to ask a few simple questions hoping for some insight.

My solution was: I went to windows restore and I restored to a version prior to the update occurrence. This seems to fix the problem.

My questions:
1. When I updated "Software Distribution Service 3.0" my system crashed. However, I cannot be certain unless it happens again. Is there a way to keep windows updates ON but not install SDS3.0?

2. In general, is there a way to install updates but be able to restore the machine to the previous settings in case something happens? or the only way is to use the windows restore method?

thanks,

v3ks

A:STOP: d0000144 unknown hard error

Hello and Welcome to TSF.

1. Yes. Go into System Properties (Right click "My Computer' and open "Properties") and under the Automatic Updates tab select "Download updates for me, but let me choose when to install them." When updates have benn downloaded and are ready to install you'll get a popup balloon notification. Click the Balloon and click "Custom" to view the available updates. Deselect the ones you don't want.

2. AFAIK, the only method is system restore. It's made for just that purpose. You can always create your own restore point manually before installing the Windows update.

Alot of Windows updates can be removed via "Add/Remove" programs. Just check the "Show Updates" box at the top of the page to view the updates.

Read other 1 answers
RELEVANCY SCORE 85.2

I'm assuming this is a hard drive error, since this is one of two error bluescreens I have gotten on my laptop. The other one says the problem may be because of hardware or software and I have no idea how to fix it. It has not been dropped or shoved around. This specific screen came up after a box came up while Windows was still functional. The box had NT AUTHORITY System, C:\WINDOWS\system32\services.exe, and a status code:- 1073741818. When it crashes again, I will add other information on the more common bluescreen. After these screens, when I restart it, there is a message that says that there is not an operating system present. It does this the first few times you restart the computer, but then returns to Windows. Please, I would really like some help on how to fix this and what may possibly be wrong.

A:STOP: c000021a unknown Hard Error

Hello and welcome to the forum,

You may be infected.

Disconnect pc from online. Use another pc or friends or local library.

Please go here and follow the directions of the forum.

http://www.techsupportforum.com/f50/...lp-305963.html

Read other 3 answers
RELEVANCY SCORE 85.2

I am trying to reinstalling XP on a friends system that I had just repaired and I keeping getting an error. I get thru the "Inspecting Hardware" portion and then moves on to "Starting Windows". Lemme clarify this is before you get to the partion and formating step. Well what happens is a BSOD error:

"Stop : c000021 unknown hard error \systemroot \system 32 \ntdll.dll"

I thought it may have been cd drive so I tried it in his other drive, same deal. I popped in two of my own drives it happened again.
I pulled out his Pc100 64mg ram stick and put in a pc100 128 mg stick of my own, again the same BOSD!

I took out his hard drive and hooked it into one of my other systems and boom! same thing. Grrrr. I took the Windows disk and popped it into my system, just to see what would happen and low and behold it happened again! (left eye starts twitchin').

I have done an exhaustive search on this forum and on Google and found many different possible fixes and some very vague info.

This is a list of the possible fixes I have found.

1 turn of UDMA in BIOS
2 replace bios battery
3 replace the hard drive
4 try a different cd rom

1 I searched my BIOS and I can't seem to find any UDMA setting.
2 I know it isn't the BIOS battery, three systems, three different batteries..pfft.
3 Can't be the hard drive, I don't even get that far

The one fix that sounds most promising, was one I found on some obscure site:

Find an old 98 boot d... Read more

A:Stop:c000021 unknown hard error.....

Use the Harddrive manufacturers software to format the drives first.Then
install xp, you may need to put sata drivers on a floppy, windows will
prompt you at installation to press f3, I think for 3rd party software, that
is when you will need the floppy with the sata drivers.,it may be f6.

Read other 5 answers
RELEVANCY SCORE 85.2

I was referred to this forum by the Windows XP forum.
My operating system is Windows XP Service Pack 2.
Whenever I try to run the antispyware program "noadware", I get a window entitled "winlogon.exe" , which contains the message that an attempt has been made to write into a certain memory location. Another window behind winlogon.exe, entitled "Data Execution Prevention", contains the message that Windows is terminating the program. Both these windows disappear and the blue screen of death comes up with the message "STOP: d0000144 UNKNOWN HARD ERROR."
This behavior has occurred only recently. In the past, Noadware ran properly. It still runs properly in Safe Mode. All other programs appear to be functioning correctly in Normal Mode.
I ran the Microsoft debugging tool, which indicated a possible conflict with an AOL file called waol.exe. I moved this file to the desktop and restarted my computer, but the problem with Noadware persisted. I also notice that when I turn off the computer, I get a message saying that waol.exe failed to initialize.
My antivirus (Zone Labs) and my other antispyware program(also Zone Labs) do not indicate any infection. I was advised by the Windows XP Forum to go to HijackThisLog Help to see whether the cause of my problem is malware.
The logs Activescan.txt and Extrascan.txt are attached. Mainscan.txt is printed below:

Mainscan.txt:
Deckard's System Scanner v20070426.43
Run by melvin on 200... Read more

A:STOP: d0000144 UNKNOWN HARD ERROR

"bump"

Read other 1 answers
RELEVANCY SCORE 85.2

I am running WinXP SP1 on a FAT32 drive. My mobo is ECS (Elite Group) K7VTA3v3, with updated BIOS, 1.3GHz Duron and 256MB DDR.
I recently installed an ECS AG315T 64MB AGP card (SiS 315 chip) and get the above error code every time I boot up. I downloaded the lastest drivers from ECS (Xabre 309) but this has not fixed the problem.
I can boot to 'Last known good configuration' or safe mode, which gives me a generic display, but every time Windows detects the card and installs drivers, I'm back to square one.

I tried unistalling the AGP card in Control Panel, then reinstalling, also slowed down the AGP slot to 1x in the BIOS. I'm stumped, any suggestions, please. BTW, my old NVidia card works just fine, so it's not the mobo.
The separate components seem to work ok, but not together, even though they are made by the same company.... I realise they are considered 'low end' components, but I'd at least expect them to work!
 

A:Unknown hard error: Stop C0000415

I suggest that you click onto the following link. You problem is discussed here and you will also find a number of solutions. Good luck!

http://www.annoyances.org/exec/forum/winxp/t1038723574
 

Read other 2 answers
RELEVANCY SCORE 85.2

STOP:c000026c Unknown Hard Error
Unknown Hard Error
If this is the first time you've seen this Stop error screen,
restart your computer. If this screen appears again.
follow these steps:

Check to make sure any new hardware or software is properly installed,
If this is a new installation,
ask your hardware or software manufacturer for any windows 2000 updates you might need.

If problems continue,
disable or remove any newly installed hardware or software,
Disable BIOS memory options such as caching or shadowing.
your computer, press F8 to select Advanced Startup Options,
and then select Safe Mode.

Refer to your Getting Started manual for more information on troubleshooting Stop errors.

***************************************************
I've formatted probably 30 times in 4 days,traded in my motherboard for a new identical one..bought new HD..keep getting this error after a while.Before I go any farther,I just built this machine..I can install Win2k sp3..gather my drivers..but it doesn't take long before a reboot fails and I get that message above.Before I go and update my bios,I wanted to see if anyone out there has any gems of wisdom on this subject.Here's my specs:

-Win2k SP3
-Directx 9.0
-Nvidia dets Version: 43.45
-*not installing any mainboard drivers from the cd..I'm pretty sure they are dated*
-Phoenix -AwardBIOS v6.00PG(i think that it's 002 or something.)
-Soyo KT400 Dragon Ultra Black Edition
-AMD athlon... Read more

A:STOP: c000026c Unknown Hard Error

It's not the most useful MSKB article but it may be a start.

http://support.microsoft.com/default.aspx?scid=kb;en-us;Q314474

another search result turned up this comment. "I am going thru this right now. I was advised to disable Ultra DMA access on CDRWdrive, which I did, and blue screen went away. go figure. HOPE THIS HELPS SOMEONE!"
 

Read other 12 answers
RELEVANCY SCORE 85.2

STOP: d0000144 Unknown Hard Error

I tried to re-start . It gets to the blue screen again then does the same thing. I've tried starting in Safe mode but this just has the same effect.

A:STOP: d0000144 Unknown Hard Error

welcome

download the hard drive's utility from the manufacturer.

set the boot sequence to boot from the floppy in your bios.

reboot

let the utility run a diagnosis of the drive

Read other 7 answers
RELEVANCY SCORE 85.2

Hi,

I have a windows XP home laptop that every time you boot come up with the message:

STOP: C0000221 unknown Hard Error
Unknown Hard Error

Most of the posts and threads I have looked at suggest that the second line should give the name of the offending file(s) but this just says Unknown Hard Error.

I have run a memory check using MemTest and booted in to the repair consol using the XP disk and run CHKDSK (which fixed some errors but not the problem)

Any help on this would be very much appreciated.

Regards,

Tim

A:Hard Error C0000221

Hi timmy, um...your in the Vista section but no probs here is a link to the prob http://support.microsoft.com/kb/314474Im not fully up to speed on all the fixes but the link does say it may be linked to a dll error so if you have your XP disk handy go to comand prompt and type insfc /scannowand insert your OS disk when prompted.

Read other 7 answers
RELEVANCY SCORE 84.8

Ok i been trying to reinstall Windows XP Pro and im getting this msg " Stop: c0000221 Unknown Hard Error \SystemRoot\System32\ntdll.dll it will load the drivers then reboot to go to the other screen then i get this error

I cant Seem to get it installed at ALL !! can some 1 tell me how to fix this i erased all the content of the Hdd
 

A:Help Installing XP Error (\SystemRoot\System32\ntdll.dll)

Read other 6 answers
RELEVANCY SCORE 84.8

My laptop started acting crazy about 3 days ago, I ran root-killer on it and than ran avast and commando and cleaned up computer. Now it was opening and started to run great, now it did a blue-screen on me rebooted and looks good runs good just wont get online even thou connected to internet and keeps showing this little box saying (WMPNetwk.exe= system error + unknown hard error). Also it will not let me apply my firewall. Please someone help.
 
 
             Thanks Chris R

Read other answers
RELEVANCY SCORE 82.4

Hello,
My computer with windows XP denies me access by a blue screen with the message ?STOP C0000135 unknown Hard Error?. I had been running an anti-virus; some essential files got deleted in the process. Having read on the internet that this error often result from the loss of advapi32.dll, Gdi32.dll, Kernel32.dll, or/and User32.dll, I restored them all by ?extracting a copy? from an XP CD using the Recovery Console (in ?cd system32?, the four commands ?ren kernel32.dll kernel32.old?, mutatis mutandis, all get the answer that ?(kernel.32/advapi32/gdi32/user32).old? already exist). But nothing changed. (The CD I used is SP2, but I don?t know whether the OS is SP1 or 2, perhaps the copies I extracted are incompatible?) Nor can I ?access safe mode or last known good configuration. I ran chkdsk /r and it said it found and fixed one or more errors, but it didn't help.??a description of another?s blue screen I found on the internet, but my case exactly, except that I did the last several times. Restoring the four .dll should?ve done it by many accounts, but I?ve read many other files being absent could also cause this error, and that it?s hard to find which they are. It looks from my little research that I could try Fixboot and Fixmbr (both dangerous), try a Repair Install of XP, using Ghost (I got the message "Output error file to the following location: a:/ghosterr. txt".), or reformat. Automated System Recovery offered in the Recovery Console is said to be ?a? last re... Read more

A:[SOLVED] A “STOP C0000135 unknown Hard Error” that mocks my tweaks

Hi Sophia. Welcome to TSF.

If you run "fixboot" from the recovery console, it isn't really dangerous. The "fixmbr" is the one that can damage your partition tables if a virus is present or if a hardware problem exists. To date, I've never had a single issue when running fixmbr. What were you doing right before this started happening? Did you install any new software or hardware?

Good day!

Mike

Read other 19 answers
RELEVANCY SCORE 78

Hello all,

Before I give my situtation here is a quick summary of my hardware.

Mobo MSI K8T Neo
Graphics Saphire X1950 Pro
2 seagate baracuda RAID 0 array 120G each so 240 total, only 1 partition.

My computer is going to be 4 years old in June. I have never formatted. It started showing problems when I tried to install drivers for the graphics card. I could never get the drivers to work properly, now my framerate drops every few seconds in every game. I decided it was time to format it after I left alone for a few months.

This is the process I followed:

1-) Enter Windows XP SP3 CD in drive.
2-) Boot from CD.
3-) Windows Set Up appears and loads it's files.

At this point, I get the message "Starting Windows" which usually comes right before the Set up screen where I could format but I get an error (blue screen) that says

unknown hard error, NTDLL.DLL

What should I do now? How do I troubleshoot this?
 

A:Hard error, ntdll.dll

Try this link, http://pcsupport.about.com/od/fixtheproblem/a/ntdlldll.htm
 

Read other 2 answers
RELEVANCY SCORE 78

hey guys.... made an account in the hopes you might be able to help me.
right, we borrowed the wifes folks laptop hp 655 (win 8), while i repaired the hdd on ours.... when i came home today the wifes says the laptop is acting up, when i turn it on there is an error popup saying explorer.exe system warning unknow hard error. there is only a couple of tiles in the metro view. cant mind what they were. so all of their programs have been lost.
if i go to the recyle bin (the only way i can view the c:\ files) i can see everything is there. now if i click the close button on the popup or say ok, it starts going mental, logging in and out, and bouncing from metro to desktop.... cant stop it.
i can boot into safe mode.... still no files there. i dont think they have created a restore point, so thats out the question...... what the hell is causing this!!!???
googling it people are saying delete the load reg key in hkey-currentuser\software\microsoft\windowsnt\currentversion\windows but there is non there.....
any people know how to solve this?
any help would be appreciated... thanx guys.

Read other answers
RELEVANCY SCORE 76.8

I got a Blue Screen saying nothing except Unknown Hard Error on windows 7. So I restarted the computer and when I booted Seven, windows first popped up with a message saying windows is loading files and then Startup Repair popped up saying

Startup repair is checking your system for problems.

It completed once and restarted but same thing happened again. And now startup repair keeps going on and on.

Can someone help me out?

I'm through the same comp using windows xp on a dual boot so I don't think hardware is acting up.

This is the thread on BSODs I kept having on the seven:
http://www.sevenforums.com/crashes-d...bsod-help.html

A:Unknown Hard Error - Startup Repair is checking your system..

now xp isn't booting either.

it says load needed dlls

should i just reinstall the OS'?

Read other 2 answers
RELEVANCY SCORE 75.2

I need help, I cant install windows xp sp3 on my computer
I get this error message

---------------------------
Service Pack 3 Setup Error
---------------------------
The file c:\windows\system32\ntdll.dll is open or in use by another application.

Close all other applications and then click Retry.
---------------------------
Retry Cancel
---------------------------

I get this message everytime I try to install. I have already disabled my antivirus and antimalware but still this error shows up. Help please.

------Malwarebytes Anti-Malware (PRO) 1.75.0.1300-------
www.malwarebytes.org

Database version: v2013.10.02.06

Windows XP Service Pack 2 x86 NTFS
Internet Explorer 6.0.2900.2180
MOON :: MOON-2F8500C917 [limited]

Protection: Disabled

10/2/2013 11:03:30 PM
mbam-log-2013-10-02 (23-03-30).txt

Scan type: Quick scan
Scan options enabled: Memory | Startup | Registry | File System | Heuristics/Extra | Heuristics/Shuriken | PUP | PUM
Scan options disabled: P2P
Objects scanned: 246681
Time elapsed: 13 minute(s), 54 second(s)

Memory Processes Detected: 0
(No malicious items detected)

Memory Modules Detected: 0
(No malicious items detected)

Registry Keys Detected: 0
(No malicious items detected)

Registry Values Detected: 0
(No malicious items detected)

Registry Data Items Detected: 0
(No malicious items detected)

Folders Detected: 0
(No malicious items detected)

Files Detected: 1
D:\Documents and Settings\MOON\My Documents\Downloads\SoftonicDownloader_for_... Read more

A:Windows\system32\ntdll.dll is open error when installing Windows XP SP3

You can not install on a running (ie already booted) system.

One choice is to run Windows Update from an admin login and let it perform Updates. If the SP3 is an update that is available, Update will do the right thing.

The other choice is to boot a CD and perform an install from the CD (ie the PC is not running from the HD).
 

Read other 3 answers
RELEVANCY SCORE 70.8

I saw in another topoic dating back to around 2004 that had this same error message. But im not exactly sure what hijackthis was so now ive given it a shot and hopefully someone will be able to help.Occasionally when I startup or go on certain website my computer crashes and gives me a blue screen of death showing the following informationStop 0x0000008E (OxC0000005, 0xF72A8609 OxF77D4A28, 0x00000000SYstem32: lzx32.sys - Address F72A9609The message appears to occur completely at random. I havent changed any hardware so im almost certain that it's not hardware related. Also at random my computer gets an error message from Services.exe/bat saying its performed an illegal operation and Must be shut down. That occurs completely at random too. The only pattern ive found with the blue screen of death is that it occurs when it ry and install windows updates or when i try and install a certain gamethe Hijackthis log is as followsLogfile of HijackThis v1.99.1Scan saved at 3:00:54 PM, on 19/01/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\csrss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\SY... Read more

A:System32: Lzx32.sys. Stop: 0x00000082 Error Message.

Hello Montay, I am SifuMike and I will be helping you. Download http://www.uploads.ejvindh.net/rustbfix.exe ...and save it to your desktop. Double click on rustbfix.exe to run the tool. If a Rustock.b-infection is found, you will shortly hereafter be asked to reboot the computer. The reboot will probably take quite a while, and perhaps 2 reboots will be needed. But this will happen automatically. After the reboot 2 logfiles will open (%root%\avenger.txt & %root%\rustbfix\pelog.txt). Post those two log files. 1. Download this file - combofix.exe 2. Double click combofix.exe & follow the prompts. 3. When finished, it shall produce a log for you. Post that log in your next reply Note: Do not mouseclick combofix's window while it's running. That may cause it to stall Disable script blocking if you have Norton Antivirus installed so it will not interfere with the fix. Trojan Hunter has been reported to detect combofix as Worm.Qiv.100. Post the Combofix log and the two rustbfix log files along with a new HijackThis log.

Read other 2 answers
RELEVANCY SCORE 70.8

Hi, I have been getting the dreaded blue screen of death with STOP: c000021a (Fatal System Error)" Error Occurs when i log into my windows 2000 service pack 3 and my linksys wireless usb network adapter connects me to the internet. My computer will remain on and run fine if i do not connect to the internet. This also will happen if i connect to the internet using my backup 56k modem. Any suggestions on what is happening?
 

A:STOP: c000021a (Fatal System Error)" Error Occurs

Read other 8 answers
RELEVANCY SCORE 70.4

Has anyone came across this problem before? One of my coworkers was running a CD on her computer when it shut down. When she tried to restart her computer it came up with this stop error.

Stop:C000026c Unable to Load Device Driver.
System Root|System32|Drivers|msgpc.sys device driver could not be loaded.
Error Status was 0XC0000221

She has gone onto the windows website and can not find this stop error.

Please help!
 

Read other answers
RELEVANCY SCORE 69.6

my dell laptop gives me error msg 'STOP:d0000144 unknown Hard Error' when i start it up. i had shut it down manually using the button coz a lot of msgs about spyware and antivirus kept popping up and freezign my screeen and now i can't get into my computer! it logs into the the computer up to the screensaver and then blacks out with this msg. my OS is windows XP - bought the laptop about 3-4 yrs ago. they didn't send me a CD in the package. help please!?

A:STOP:d0000144 unknown error

If you have the xp disk, follow the xp repair in my signature. Once done, follow the malware removal link in my sig.

Read other 1 answers
RELEVANCY SCORE 69.6

hey im all of a sudden gettign an error that goes to a nlue screen and at the top left hand it says :

"Stop: c000021a (fatal system error)
the windows logon process system process terminated unexpectedly with a status o
the system has been shut down"

need help asap!!
 

A:Unknown error..."stop:c000021a fatal error"

Read other 14 answers
RELEVANCY SCORE 69.2

Help!!!!
I would appreciate some help, as soon as I start up my computer
My XP Home reboots after flash screen. I get a, STOP: c0000221 {Bad Image Checksum} Image url dll is possibly corrupt. The Header checksum does not match the computed checksum ,and, I am at a complete loss as to what to do.
Kind regards
marie

A:Error c0000221

This may help http://support.microsoft.com/kb/314474

Read other 12 answers