Over 1 million tech questions and answers.

remote device or resource wont accept the connections

Q: remote device or resource wont accept the connections

Here's the details, ive tried everything i can think of. any ideas would be greatly appreciated.Windows Network Diagnostics Publisher details
Issues found The remote device or resource won't accept the connectionThe remote device or resource won't accept the connectionThe device or resource (www.microsoft.com) is not set up to accept connections on port "The World Wide Web service (HTTP)". Detected Contact your network administrator Not run
Issues found Detection details
6 The remote device or resource won't accept the connection Detected The device or resource (www.microsoft.com) is not set up to accept connections on port "The World Wide Web service (HTTP)". Contact your network administrator Not run The computer or device you are trying to reach is available, but it doesn’t support what you’re trying to do. This might be a configuration issue or a limitation of the device.
Detection details
Network Diagnostics Log File Name: 7674AB63-FC41-4BCE-BD41-15C8324692DB.Diagnose.0.etl Collection information Computer Name: *****-PC Windows Version: 6.1 Architecture: x86 Time: Thursday, January 28, 2010 2:32:50 AM
Publisher details
Windows Network Diagnostics Detects problems with network connectivity. Package Version: 1.0 Publisher: Microsoft Windows ~someone tried to update windows vista home premium, and messed around with services and who knows what. I installed an upgrade of windows 7 ultimate, and i believe the services are all back to normal *i went through them one by one as a comparison*, The network information shows the laptop being connected to the network, just not to the internet. I did however get the internet to work earlier in safe mode. Not sure if im able to get it up in safe mode again at this point in time. when i did get it connected, installed avg anti-virus, which came back w/ nothing but removed some tracking cookies. Then ran smitfraudfix then nothing would work, so i used the restore to get it back to the orignial problem. Im just trying to get the internet to work. Please help. Its got to be something simple ?Wireless LAN adapter wireless network connection:Connections-specific DNS suffix..:Link-local IPv6 Address...: fe80::a160:39d4:b631:2022%12IPv4 Address..:192.168.1.2Subnet mask..:255.255.255.0Default gateway..:192.168.1.1Ethernet adapter local area connection:media state: media disconnectedconnection specific dns suffix...:Tunnel adapter Teredoo tunneling pseudo-interface:Connection-specific DNS suffix..:IPv6 address: 2001:0:4137:9e50:18b5:26d7:3f57:fefdlink local ipv6 address..:fe80:18b5:26d7:3f57:fefd%13Tunnel adapter isatap.<9135EF73-8226-4A96-B1DB-78D92D3D9D39>:media state: media disconnectedTunnel adapter isatap.<76378AA6-95BB-4570-B867-E0CB20B88812>.media state..: media disconnectedRunning: Toshiba Satellite laptop w/ windows 7 ultimate 32-bit

Read other answers
RELEVANCY SCORE 200
Preferred Solution: remote device or resource wont accept the connections

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 120

Hello Tech Guy Support,
I really need your help. I havent been able to use internet via wi-fi for the past few days. When i try to diagnose the problem, the following msg shows up " Remote device or resource wont accept the HTTP (World wide web) connection"
I've tried several things
- Gone to LAN settings on the Network setting and unchecked the proxy server option...
also in Wireless Network connection status box, the ipv4 and ipv6 connection says no internet access...
Nothing worked...PLS Help...

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4093 Mb
Graphics Card: NVIDIA GeForce G 105M, 512 Mb
Hard Drives: C: Total - 149908 MB, Free - 27382 MB; E: Total - 142939 MB, Free - 49549 MB;
Motherboard: Acer, Aspire 4736Z
Antivirus: Kaspersky Internet Security, Updated and Enabled

Truly
TRAILBLAZE
 

A:Remote device or resource wont accept the HTTP (World wide web) connection

You are successfully connected to a wireless network, but cannot access the internet? If this is the case is the wiireless network yours (your router)?

Do you have internet access with an ethernet connection?
 

Read other 3 answers
RELEVANCY SCORE 106

I keep getting this error on my laptop. Whie browsing with any browser, websites suddenly will stop working. I run the network troubleshooting, and it says "The remote device or resource won't accept the connection." My wifi still works on my phone, and connecting to the other public wifi networks around me end up not help. I typically have to either restart, or try again another time. I ran ipconfig just now (while I'm able to connect to the internet), and it put out what I've pasted below. How do I fix this?

I'm on Windows 7

Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.

C:\Users\Ben>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Bens-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Local Area Connection* 12:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 12-F0-2F-5E-0D-E8
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Ethernet:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Qualcomm Atheros AR8172/8176/8178 PCI-E F
ast Ethernet Controller (NDIS 6.30)
Physi... Read more

A:The remote device or resource won't accept the connection

Read other 16 answers
RELEVANCY SCORE 106

Hello, I've been having this problem where it says "The remote device or resource won't accept hte connecion and it's extremely annoying, sometimes it's there, sometimes it is not.

I'm using a TP link extender with an Ethernet cable plugged into my computer. I also have from the TP link extender, a "5G" Network of my own network, which I can connect to using a mac, iphone ipad or xbox one. However, other members of my family can connect to the standard non 5G internet fine and work for them. Everyone else seems to be able to connect to the internet, but my computer, any help would be greatly appreciated!

Josh.

A:The remote device or resource won't accept the connection

Hi Josh ... Welcome to Seven Forums ... See if any of the Solutions in the Link below help ...
The remote device or resource won&#39;t accept the connection - Microsoft Community

Read other 1 answers
RELEVANCY SCORE 106

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4085 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 384 Mb
Hard Drives: C: Total - 236973 MB, Free - 154114 MB;
Motherboard: Intel Corp., Base Board Product Name
Antivirus: McAfee VirusScan, Updated and Enabled

when I click "search everywhere" when looking for a file I get an error message that IE can't display the webpage (Chrome can't either) diagnosis is "the remote device or resource won't accept the connection
 

Read other answers
RELEVANCY SCORE 106

I have been dealing with an issue where I am only able to get on a couple of websites, while every other website will not load. I have checked my auto-config settings and ive reset Internet Explorer. I used Microsoft's tool that tells you what the problem is and it came up with "the remote device or resource won't accept the connection". Ive gone through many different steps to find an answer to the problem and still unable to access any other website, im using a friends computer to hopefully get an answer to this issue. The operating system is Win 7 on a Toshiba Laptop. Thanks for the help.

A:the remote device or resource won't accept the connection

Are you using a wired or wireless connection?

Read other 11 answers
RELEVANCY SCORE 106

My desktop computer with Windows 7 started giving me this message about a month ago, and I could not get internet access. I used my cell phone to google the issue. I tried all of the recommended fixes (checking proxy settings, etc) but it still did not work. I did a system restore and got back on the internet, BUT, it continues to happen again every day or so, and again I have to do a system restore. Could anyone tell me WHY this is happening and how to fix the problem? Thanks.
 

Read other answers
RELEVANCY SCORE 106

This message pops up when I try to open internet explorer or google chrome. I have Norton antivirus. I have tried changing my settings on IE and Norton and all other settings I could think of. I have tried various different wireless networks and get the
same error message. What can I do to get on the internet?

A:The Remote device or resource won't accept the connection

Hi,
For this issue . please try the following solutions:

Please open IE>Tools> Internet Options>Connections>LAN settings>Uncheck the option ?Automatically detect settings? and click Apply & OK, re-open IE.Temporarily turn off firewall and anti-virus.Reset IEIf doesn?t work, please test IE with another user account, if you don?t have, please just create one for a test.
Control Panel>User accounts>Manage user account>add a new account.
What is the result, please free contact us.
Regards,
YolandaYolanda
TechNet Community Support

Read other 23 answers
RELEVANCY SCORE 104.8

My computer did the Windows 10 update yesterday and since then I am getting an error when trying to go to certain websites. I have tried to update the proxy settings but this has not fixed the issues. Not sure what else to do. I would greatly appreciate any assistance.
 

Read other answers
RELEVANCY SCORE 104

my friend is getting this error and cannot connect to the internet so im posting this for him...
He downloaded and ran a .reg file that was named crack1 without even reading any comments or anything and it corrupted his internet.....

Whenever he tries to go to a website it just says cannot connect to webpage.
he runs diagnostic and gets that error
The remote device or resource won't accept the connection

ive googled it and he's done the thing where you do this....
control panel>internet>advanced>reset

after he did that he went to youtube it loaded fully then went back to cannot connect after 5 seconds so that the error

A:The remote device or resource won't accept the connection win7 32bit

and of course he doesnt have a backup to restore from before he had the problem, right?

Does he have the win 7 dvd to do a repair install?

Read other 3 answers
RELEVANCY SCORE 104

Would appreciate some help restoring Internet connection.

Did an install of Windows 7, and, at first, had Internet access. Installed an AV (Panda), MBAM, Windows Updates, and also tried to upgrade IE8 to IE11. Have no clue what borked the connection.

Keep getting:
"The remote device or resource won't accept the connection."
"Connection with server cannot be established."

In Device Manager there was a Teredo Tunneling Pseudo-Interface with a yellow flag. I removed it and restarted, but, it was not there after the reboot, so, it did not re-install.

Thanks for your help.

A:No Internet access, remote device or resource won't accept connection

Marie have you run the Network Connection Troubleshooter?



Did you install the wireless driver from the PC maker's Support Downloads webpage?

Can you plug in by ethernet cable to download that driver and install? In addition Check for Updates to install any other Important or Optional Updates, as other drivers or patches may be needed for this.

A search for the error here suggests resetting IE and also says spyware may be involved.

If you want I can connect via TeamViewer to go over and and finish setting up the install for you. Install at all defaults and PM to me the ID and pw. I am here til midnight PST tonight and all day tomorrow.

Read other 3 answers
RELEVANCY SCORE 96

Hi,
Since updating to Windows 8.1 Pro 64 bit (latest version), in File Explorer listed under Computer I see my other PC's but I no longer see devices like my Synology NAS etc. All PC's and devices are connected using ethernet cables via switches.

The devices still appear in File Explorer on my other Windows 8.1 Pro 64 bit (latest version) PC under Computer so the problem seems to be on the first PC rather than my Asus router.

I just tried putting the name of the devices (\\diskstation etc) in the address bar of File Explorer and with one of the devices I got error 0x80004005 so I ran the trouble shooter and got this error:-

Problem found
The remote device or resource won't accept the connection               Detected            !
Detailed Information
The device or resource (FOXSAT-HDR) is not set up to accept connections on port "The File and printer sharing (SMB)".

I've tried disabling AVG virus software, Windows Firewall and my Asus Router firewall but it makes no difference
sfc /scannow was OK

The Network Adapter has had the latest driver installed.
I've hunted high and low for a solution, I went through this thread very closely ( https://tinyurl.com/p9gk9sn ) but still no solution ... HELP

Regards
Barry

A:Problem since 8.1 update - The device or resource (PC-NAME) is not set up to accept connections on port "The File and printer sharing (SMB)"

At last I found the cause of my problem, during my Windows Refresh some Windows features were turned off, make sure this is enabled:-

Control Panel / Programs and Features / Turn Windows Features On or Off and make sure SMB 1.0/CIFS File Sharing Support

Read other 4 answers
RELEVANCY SCORE 94.4

Well I'm on Windows 8 and my computer has been running fine until yesterday. Randomly at around 8:00, my internet shut itself and it wouldn't work. I tried resetting the router and such but nothing worked. My computer can connect to the internet connection,
but when I boot up Google Chrome it will not work. So I did some troubleshooting and eventually it said this "The remote device or resource won't accept the connection". And it's not only my internet browser that won't work. Other apps like Skype
won't connect either. After looking at another thread, I tried resetting the settings on Internet Explorer and changing the Proxy thing but nothing worked. Someone also suggested downloading Hitman, but that was stupid considering I couldn't even connect to
the internet. I had Windows Defender scan my computer and it said there was nothing wrong. So I'm not sure what is up. Any help at all would be greatly appreciated.

A:Cannot connect to Internet. "The remote device or resource won't accept the connection"

Make sure other device connected to your internet don't have similar issue
is there any changes before this issue happen? install, reinstall, windows update, HW changes, router setting or environment changes
just try at safe mode with networking, if its fine at safe mode with networking, than something to do with 3rd party software, antivirus, firewall ect. Try to restore your PC using restore point
if this issue also persist at safe mode, its considering driver or hardware failure (try to update driver, reinstall or run basic TS regarding WLan issue)

Read other 10 answers
RELEVANCY SCORE 94.4

Hello and thanks for reading,

I have the oddest problem here at work. I have a brand new Latitude E5530 that would not connect to the internet, but would connect to our LAN. We had the motherboard replaced by Dell, but a few weeks later, while a download of the free AVG anti-virus program was being installed, the same thing happened again where we could not connect to the WAN, but the LAN was fine.

I formatted the HDD, reinstalled the OS (7, Pro, 32bit), installed all the factory drivers and still the same thing.

This only happens when I'm at work. We have multiple laptops of the same make/model/OS that are working perfectly, but not this one (at least not for long)

One thing that does allow me to connect to the WAN. I have a LinkSys USB Ethernet Adapter. There is no Windows 7 driver for this, so I've used the Vista 32 bit driver when installing the software and I can connect no problem.

I've also had one other computer give me fits about accessing the WAN at my job. This unit (I believe it's a Dell optiplex 780) had XP installed and would occasionally lose WAN connection, but a reboot would take care of the problem. The problem grew to where more reboots were necessary until one day nothing could be done to connect to the WAN (once again, the LAN connection was fine). I ended up replacing that computer. Recently however, that computer also was having problems connecting to the WAN, even after removing/reinstalling the NIC driver. I used another of the LinkSy... Read more

A:"The remote device or resource won't accept.." error, but only at work

Ahh heck! I forgot to add the entire message I'm getting. The error is :

The remote device or resource won't accept the connection.

Sorry for the confusion

Read other 2 answers
RELEVANCY SCORE 94.4

So I ran avast looking out for viruses and then it moved then to the vault and when I tried to open up my browser this morning this error showed up in the network troubleshooting. If I try using chrome it says that I can't stablish a connection with the proxy servers, I'm only able to open google but that's it. I've tried the method of going into lan settings of IE but that didn't work, I tried the turning off firewall but that didn't work either, fully deleted Avast and nothing... What is there left to do?

Please, help!

If of any use my laptop is an HP Pavillion DV7 with windows 7 home premium 64bits.

A:Getting error "The remote device or resource won't accept connection"

Try:

Run cmd as admin:
netsh winsock reset

Read other 9 answers
RELEVANCY SCORE 94

Hi all,
Back again with another Windows 8 problem My Dad's HP computer with Windows 8 was all working fine up until yesterday, but now for some reason, it can't access the Internet, even though it is connected (my laptop is connected to the same network and can access the net with no issues). I tried running a troubleshooter and I got a message saying "Remote device or resource won't accept the connection" though it didn't offer any solutions. I have tried resetting both the computer and the router and it has not made a difference. He has Kaspersky anti-virus and to my knowledge, has not installed/uninstalled any software recently, so I can't think of anything that would have caused it.

The only thing I could think of was that maybe the cable running from my router, through the roof to their computer in the other room may have somehow failed or become damaged, but in that case I would have thought it wouldn't be able to find the network at all (it still says it is connected to the Internet). Since testing this would involve climbing up into the roof etc and both I and my old man have dicky knees, I was hoping someone might have suggestions for what could be causing the problem, or how I might be able to fix it with (relative) ease. Thanks in advance

(P.S. Sorry if this is in the wrong section or has already been answered, if this is the case, please just point me in the right direction)

A:"Remote device or resource won't accept the connection"

hmm I messed around on the computer for a while and for some reason the internet is now working perfectly. It seems that somehow sharing between networks had been turned off, and once I fiddled with that, it was up and running again.

Read other 1 answers
RELEVANCY SCORE 92.4

I have installed Wamp server and I have created 2 tables in phpmyadmin that are connected via ODBC to an Access database. I have tested it with and another Access
database, which sends test orders to it via a php file.
Now I wish to connect an AI2 android app to localhost to send test orders from this source.

I found a web page which sets out a method to connect an app via the IP address, but when I enter my IP address into Windows Explorer I get the following message.
?The device or resource is not set up to accept connections on port "The World Wide Web service (HTTP)".
I have seen a previous answer that suggests resetting Internet Explorer\Tools\Internet Options\Connections\LAN Settings and checking the ?Automatically
detect settings? box, but on my system this is already checked.
Is there anything else I can do please?
My system is Windows 7 32 bit and I have Microsoft Security Essentials and Microsoft Firewall running for home & private networks.

Read other answers
RELEVANCY SCORE 77.2

Hi, sometimes while doing something like browsing the web or just playing games, then i try to open a website and it wont connect as if i have no internet.

But i can still continue to stay on Teamspeak 3 and talk to people but if i disconnect from teamspeak i cant re join it.

i can connect to a website on my out of country dedicated server via IP address and it loads fine.


anything that is already connected stays connected like online games and such. but if i try and open a website or login to another game or program it wont allow and act as if i have no internet.

windows 7 64 bit home premium


plz halp!

thnx

A:Windows 7 Wont accept new internet connections.

Sounds like a browser problem. Try doing an AV scan and also scan using Malwarebytes Anti-malware first though.

Read other 5 answers
RELEVANCY SCORE 76.4

i have hp probook4530s .my device won't accept connection.also i am not able to use internet on my device,and i am getting error while logging microsoft account.

A:Remote device cannot accept connection

Hello, Welcome to the HP Support forum. Thank you for posting.  Could you clarify few things and provide more details:- did it ever work ? If yes, what happend and when for it to stop working as expected ? - What is your operating system used ?- Do you have network device drivers installed ?- Do you use any 3rd party security application (with firewall capability) ?  Looking forward to your reply.

Read other 1 answers
RELEVANCY SCORE 76.4

Hello

I encountered a problem with my internet connection and I believe it may have to do with DNS. I can't access the internet at all on my laptop, neither Chrome, Internet Explorer, or Firefox work. I ran a diagnostics test and received this message: "The remore device or resource won't accept the connection." More details state that "the device or resource (www.microsoft.com) is not set up to accept connections on port 'The World Wide Web service (HTTP).' I've searched through many forums and tried countless possible solutions:

Resetting my computer
Power cycling the modem
Resetting Internet browser settings
Flushing the DNS via cmd
Releasing and renewing the IP address (Note: cmd is unable to renew the IP because it fails to connect to the DHCP server)
Disabling Windows Firewall
Checking for proxy settings that may be checked

I'm using a wired connection that goes directly to the modem, no router. An interesting thing to note is that I am able to connect to the internet via mobile hotspot on my Android phone. I've already contacted my ISP (Comcast) and they believe it's a computer related issue but through my trials, this doesn't seem to be the case. It looks like a DNS issue.
 

A:The remote device won't accept the connection

Oh, here is my ipconfig (I couldn't include it in the original post because I'm using my phone and the length of post ate up lots of memory)

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Deity>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Deity-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : s3woodstock.ga.atlanta.comcast.net

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR9285 Wireless Network Adapter
Physical Address. . . . . . . . . : 38-59-F9-72-E3-AA
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : s3woodstock.ga.atlanta.comcast.net
Description . . . . . . . . . . . : Atheros AR8151 PCI-E Gigabit Ethernet Con
troller (NDIS 6.20)
Physical Address. . . . . . . . . : 14-DA-E9-C3-09-05
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 50.142.241.122(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.252.0
Lease Obtained. . . . . . . . . . : Tuesday, May 21, 2013 6:39:00 PM
Lease Expires . . . . . . . . . . : Tues... Read more

Read other 1 answers
RELEVANCY SCORE 76.4

I have windows 7 and been having this problem on one of the profile account have I have set up. All other profile account work except this one. It will not accept the connection of the internet. I am using wireless internet. This has not happened before. It started when my computer will randomly disable the wifi settings. When I go on all of my internet browsers it says unable to connect to the proxy server this is on google chrome(my preferred login source). I have been looking all over for solutions

A:Remote device won't accept connection

If you go into setting, Click Show advanced settings. In the "Network" section, click Change proxy settings Source

Read other 1 answers
RELEVANCY SCORE 66.4

Audio jack from laptop only accept the first device introduced and if i want to exchange headphones with speakers the speakers dont work,but if i restart and insert the speakers work very good,please tell me how to solve the problem 

Read other answers
RELEVANCY SCORE 60.4

Hi guys,

I'm going crazy here... I am looking for a way to enable VPN connections TO my Windows 7 machine. I cannot seem to find this anywhere.

I know this was kinda hidden on Vista too, but in Win7 I cannot even find it!

Can someone PLEASE point me in the right direction. I'd like to be able to connect via VPN to my home machine when I'm not around, you know - access shared folders, printers and such.

I really hope they put this in the beta and that I am just blind and not seeing it.

A:How to Accept VPN connections?

  
Quote: Originally Posted by peconi


Hi guys,

I'm going crazy here... I am looking for a way to enable VPN connections TO my Windows 7 machine. I cannot seem to find this anywhere.

I know this was kinda hidden on Vista too, but in Win7 I cannot even find it!

Can someone PLEASE point me in the right direction. I'd like to be able to connect via VPN to my home machine when I'm not around, you know - access shared folders, printers and such.

I really hope they put this in the beta and that I am just blind and not seeing it.


hi open control panel - network and sharing center - change adapter settings
while the window is open press alt and the menu bar will be visible then go file new incoming connection and follow the prompts

cheers brad

Read other 9 answers
RELEVANCY SCORE 59.6

To make a long story short, I'm following this guide to allow my Dreamcast to connect through my computer's broadband connection.

I got through it all fine until I have to create a connection that can accept incoming connections. I go into the new connection wizard but on the screen to set up an incomming connection, upon clicking next, I get the following message (sorry for using putfile):http://putfile.com/pic.php?pic=10/29922373750.jpg&s=x10

I'm assuming it's an XP Home Edition thing, which is what I'm running, but I'm not sure.
 

A:Accept Incoming Connections

Read other 6 answers
RELEVANCY SCORE 56

Hi everyone

I recently bought a new PC and have got a problem with logon to my IP camera via IE interface.
With my old PC I still can login to IP camera without problems.

My old PC:
OS = WinXPpro SP3
IE8

My new PC:
OS = Win7 pro (32) SP1
IE9

When I try to login with my new PC, I fill user name and password in identification popup window, but IP camera does not accept them.
I disabled protected mode in IE9
ActiveX filtering is switched off
In both old and new PC security is SSL3.0 / TLS1.0

Could you pls. help me ?
Thank you very much in advance !

A:Remote server does not accept login in IE9

Hello

What error mesage to you get?

Do you have these problems in any other browsers? Please try one of the below (both are free):

Firefox
Opera

Read other 2 answers
RELEVANCY SCORE 56

I just purchased a used laptop. Runs great, love it. Right up until I try to go online. It came with both Explorer 9 & Safari. It is running Win 7 Home Premium. It is an Acer Aspire 5732Z. It says It is connected to my WIFI & the wireless indicator is on. I get Safari's version of the same message I get from Explorer. The error message reads "Explorer cannot display the webpage". Connection Diagnosis comes up with "The device or resource will not accept the connection". The laptop was not cleaned out very well, it appears only personal files were deleted. The last thing done on it was update downloads. (I know this because the battery was dead when I got it & the first thing it did when plugged in was "resume" windows & install updates. The computer I am on is old & SLOW & dying slowly & (for me) painfully. I can't afford to ship it back & take the 20% loss, but I NEED to be able to get on the net to work. Any ideas? Questions? Suggestions?
Thanks
 

A:Solved: cannot dosplay ANY webpage - "Resource won't accept the connection"

Read other 16 answers
RELEVANCY SCORE 55.6

Hello

When I try to connect via remote desktop with http:/[email protected] I receive the following:


This occurs when I invoke RDP in the form rdp://[email protected]

Once i click on "OK", Then it shows my login avatar, with a password box, and upon providing my password credentials it returns to the screen above, so I know I'm getting through to the correct machine.

If I attempt to merely connect to the machine w/o providing a username, then I get no login prompt whatsoever.

If I try to connect from another windows box, I get the following:

I've set up RDP many times before, but it's been a while and I can't figure why I can't seem to login to my new Windows 7 Ultimate x64 box.
I've gone through the following pages at:

Why can?t I connect using Remote Desktop Connection?

Allow Remote Desktop connections from outside your home network

and in accordance with our very own tutorial here: Remote Desktop Connection (RDC) - Network

To be clear, I chose:






Quote:

Allow connections from computers running any version of Remote Desktop (less secure)


Seen here in this shot:


These are all things I know how to do already, but I've double and triple checked my configs to no avail.

The service is running as per "net start":


The port is open too, as nmap reports below:


Code:

$ nmap -p3389 -PN x.x.x.x # IP Address redacted

Starting Nmap 5.21 ( http://nmap.org ) at 2012-02-01 07:19 PST
Nmap scan report ... Read more

A:I need help figuring out why Remote Desktop won't accept logins...

Hi tallship, welcome to 7F!

I did not go through your external links to check if they mention whether or not you have the Services set properly for both machines.

I surmise you have double checked the reasons in this Alert box.
The suggested settings from Black Viper:

By the way, excellent first post!

EDIT: I did see where you posted the services screenshot.

Read other 5 answers
RELEVANCY SCORE 52.4

My pc will not accept pics from Paltalk says must scan first and I dont get any pics. used to before Now Netscape wants to scan Aaaargh !!!! plesa help u r wonderful thank you
 

A:my pc wont accept pics

Read other 11 answers
RELEVANCY SCORE 52.4

i have a J&W ip-35 pro motherboard and four Geil 1GB sticks of RAM. when i put more than 2GB of RAM in i get beeping and the computer wont start. I can have 2GB in and it will work fine. any suggestions????
 

A:Motherboard wont accept more than 2GB ram

Read other 13 answers
RELEVANCY SCORE 52.4

After updating to IE7 (from microsoft) why will the "run once" page,which you get firstly, not accept my settings?
 

A:Why wont IE7 accept my settings?

Perhaps there is some corruption in IE. Go to Start>Run then type cmd, click OK. In the command window type sfc /scannow, a progress bar will appear, wait for it to finish then reboot your computer. This is the standard fix for many IE problems and is worth a try.
 

Read other 1 answers
RELEVANCY SCORE 52.4

I am trying to move my system to an SSD (sandisk plus 240GB) it's a SATA 3 device.  I cloned the drive and can't get it to boot up so I look further and see that when it is installed the SSD is not even visible in the bios.  However if I install the same SSD in another working (non HP) laptop then it can be see it in the bios on that computer.  Is there some restriction on SATA 3 devices on this HP 655 laptop?  It is an Insyde H20 bios.   I have set boot order, legacy mode and other bios settings but the relevant point here is that the drive is not even being seen by the bios in the HP laptop. Thanks

Read other answers
RELEVANCY SCORE 52.4

I bought a Asus g71gx in September and it came with Vista Home Premium. I got the upgrade for windows 7 hp but it does not have the users and groups option. So I put a copy of Professional and entered the key from the box. But when I tried to activate it, it said 'this key cannot be used'. Can anyone help me fix this?
P.s

System Specs: RAM: 6 gb

HDD: 2x320 gb

PROCESSOR: Intel Quad Core @ 2.00 ghz

VIDEO CARD: NVIDIA Geforce 1 gb

OS: Win 7 Professional x64 Unactivated

A:It wont accept my activation key

You have to use an upgrade version of Windows to use an upgrade key ... you cant use it for a full version...

Read other 9 answers
RELEVANCY SCORE 52

i restored my computer to an earlier date, september, now it wont accept my password and it wont let me answer my password hint

i have lost everything, pictures, files, i know there there but how do i get to answer my question as i am admid

A:Computer wont accept my password

Hello Colette, and welcome to Seven Forums.

When you do a system restore it will also restore the user accounts' passwords to what they were at the time the restore point was created.

If you remember what it was then, you should be able to enter that password to log on.

Hope this helps,
Shawn

Read other 2 answers
RELEVANCY SCORE 52

I am needing photo's off my phone onto my laptop, so I am trying to plug in with the USB connecter and it is saying Power Surge on Hub Port, I really need pictures off my phone asap because I have an assigment due in a few days which need to include theses photos!! I've tried troubleshooting need help!!

Also I thought maybe it was just my phone and/or my phones connecter, but I tried a friends phone and connecter and came up with the same thing. Really need help asap.

A:Laptop wont accept my phone. HELP!!

It sounds like your USB port is damaged, I had the same issue on my old desktop after the front ports got damaged. If you don't have a port on the opposite side of the laptop I'd recommend transferring the files onto a different PC then burn them to a disc to get them onto your laptop. Don't persist in trying to use the USB port/s as there is a chance of causing more damage.

Read other 2 answers
RELEVANCY SCORE 52

hello after upgrading to an SSD and added more ram to my computer it was time to upgrade my graphics card from GT530 i wanted to add an 750ti.the shop worker wich is a very professional shop tried 3 different brands of 750 ti but my computer wouldnt start just a beep and nothing more after he also added a power supply before installing any new card. is there any solution to the problem that the shop workers didnt know or is there any other gpu that my computer can accept for sure?i really cannot play games with my current gpu.

A:HP Elite 7300 wont accept new gpu

Hi, Please upgrade to the latest BIOS and try again. Hope this helps Regards.

Read other 2 answers
RELEVANCY SCORE 52

Hi done it loads of times before but this time it doesnt want to let me set up email adderss, i now ive done it right(followed virginmedia) just to be sure.
What else could it be???
I get this:-
There was a problem logging onto your mail server. Your Password was rejected. Account: 'pop.ntlworld.com (2)', Server: 'pop.ntlworld.com', Protocol: POP3, Server Response: '-ERR invalid user name or password.', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92

but i know its right

A:[SOLVED] OE WONT ACCEPT email

Under the 'Server' heading, is the secure logon checked or unchecked?

'pop.ntlworld.com (2)' Why the (2) ?

Under the 'Advanced' heading, uncheck the secure connection there also for incoming and outgoing.

Read other 10 answers
RELEVANCY SCORE 52

I tried to register my HP Laptop it took me several times to get you to accept  my email address so this is what i wont it to be username Sapphire_55 email adress is [email protected] phone#423-453-7407 Patsy L. Calhoun please make this my Registration of my laptop i bought from Aaron's here in Athens Tennessee S/N [personal information removed]

Read other answers
RELEVANCY SCORE 52

Hello,

this has been driving me bonkers for the last few days, I check forums and websites but have not found any answers. I have a laptop with XP Pro on which I regularly update my password, the ctlr+alt+del > change password way.

When I tried this ealier last week I got a message saying (translating from Dutch to English): my password must be 0 characters, cannot repeat any of my 0 passwords, must be at least 0 days old.

This is totally new to me, I changed the password before without issues, so my search on the web lead me to gpedit.msc, where I select windows settings, security settings, account policy. There are several entries here and they show (again translated from Dutch to English):

maximum password time: 0
min password time: 0
min password length: 0
remember old passwords: 0
complexity: disabled
something about coding: disabled

so as far as I can tell there is not password policy however when I change my password there seems to be. I have played with this a bit and set complixty to enabled, min length to 6 and tried to change it to AbCd12! which should work as its >6 long, uses caps, lowercase and numbers, but again the same message, so I set it back to how it was, 0's and disabled.

I also tried net user <username> <newpassword> but getting the same message
the account has admin rights but I logged in as admin and tried to change the password that way for the specific account but again the same message

So right now I am totally lost, ... Read more

A:Solved: XP Pro SP3 - wont accept any new password

I am not certain I am on the right line here.
Firstly, gpedit is GROUP policy Edit and has no connection DIRECTLY with the normal user/admin/guest password.
Retunring to the cmd "net user akm-bl" - realising of course it is not that. This should provide as in my screenshot

To save me a lot of typing if you instruct the cmd
Type 'net user /HELP' for more info.
You will then see what each command is and what is achieved.

However I would recommend you type
"control userpasswords2" - start, run .
as if I am correct you will find what you want there.
On the advanced tab click the advanced button on Advanced user management and explore there in Local users and groups.
 

Read other 3 answers
RELEVANCY SCORE 52

I just got a Gig of Ram to add onto my 1.5 gigs. My old Config was 3 512 MEG STicks. Now i have 3 512s and a One Gig sTICK . I insert the one gig stick in the first slot, works fine, then the 512 works fine, then the other 512 im up to two gigs works fine. when i add the final 512 to equal 2.5 and when i startup the computer starts beeping and wont boot up at all. please help. i got a gateway 702GE intel pent 4 processor 540. THANKS
 

A:Computer Wont Accept more than 2 Gigs of Ram

Read other 12 answers
RELEVANCY SCORE 52

I have a alienware Aurora M9700, capable of having 2GB of ram but when I put in 2x1GB ram sticks it wont boot up, is this a bio problem? Cause I tried 2 different brand of 1GB ram sticks and it wont work, I know the specs are correct cause they use PC3200 DDR 400 SODIMM Non-ECC 200 pin ram. I tried using 1 old ram stick and 1 new one, but the bio still shows the old ram memory of 1GB and BSoD me when I get to windows screen. Please help.
 

A:Laptop wont accept new ram sticks.

With your old ram in, google and get everest and use that to check exaclty what your current ram is.
 

Read other 7 answers
RELEVANCY SCORE 51.6

Hi, i have purchaced a box with a dismantled Toshiba Satellite A100, now all cleaned and reasembled, heat paste etc.
On boot, Toshiba screen, blue line on tool bar etc, next it goes to black screen still booting to end up with ERROR, conflict Resource PCI on motherboard, select F1 to load Default or F2 to enter Setup.
Device 06:
This is what keeps coming up, 2 beeps, then the Error Message again, turn off reboot leads to same
Error Message. Have gone through different things to try, to reset system.

Question: what is Device 06?, and how can i fix, ERROR MESSAGE, with or without HDD SATA 120Gb recently purchased, trying to reload Win XP SP3, get part of the way, loading untill the message remove floppy as window's has to shutdown / restart to make changes work.
on restart, black screen and the ERROR msg Resource Conflict BUS 7, 06: Device

Can anyone shed light on this problem, seems to be a common problem, sorry about the length of this
Question, was hopeing for a clean reply, as all replies may as for what i have listed above.
 

A:Resource Conflict PCI- Device : 06

Read other 6 answers
RELEVANCY SCORE 51.6

Hi folks!

I've got a Windows XP Corporate Edition SP2 on a machine with processor Pentium 4, 1024MB memory a Plextor PX-716A DVD Burner and three hard drives (two of them are WDC, the one is SAMSUNG, all of them 7200RPM). I also got a TV-Out Video card (NVidia GF2 MX400) and two sound cards (one integrated, and another PCI).

I use the system basically for video editing, I got Ulead MediaStudio Pro 7.x, I know it's quite old, but the only video editor which can be called professional instead of adobe and other crap, that are terribly slow and lacking many basic features.

Nowadays I noticed a kind of weird thing. I started playing a movie on the secondary monitor and have set the priority of the media player to 'Realtime' which ensures, that under no circumstances would it be bothered by other applications taking the resources. On the desktop (Primary monitor) I started Ulead MSP, the video editor application. At first it was going smoothly, but after a while when I was seeking in my project footages, the system started jamming (both applications did this).

As I know, the priority setting in Windows XP is to tell the system which application should be given more resources at the expense of the others. So I'd have no problem if only Ulead MSP had been stalling, but both apps did, so is the priority setting for nothing?

Before I forget: the movie was being played on the secondary screen was running from DVD. The DVD Drive is jumpered to be MASTER, so it has priorit... Read more

Read other answers
RELEVANCY SCORE 51.6

My laptop is tethered to my droid x and I have a connection but I still get the yellow caution sign with the exclamation point and it says no internet access. I troubleshoot and get this your computer appears to be correctly configured, but the device or resource (DNS) is not responding but I do have a connection to the internet. I'm wondering how to get rid of the icon since it's the wrong message.

A:the device or resource (DNS) is not responding

Hi Seven,

Who are your DNS servers ?

Read other 2 answers
RELEVANCY SCORE 51.2

So i git this new Nikon coolpix 3200, and it came with a 1G Memory Card" Lexar SD", and it was all perfect, i used to take pics and then put the memory card through the Memory card slot on my laptop.
And then i got some viruses on my computer while the memory card was in, and i detected two viruses on the memory card, through kaspersky and i deleted them, then i decided to be on the safe side, i should format the card through the computer.
And then i put it back in the camera, and the camera says " this card cannot be used"
but the computer reads it fine.
Can anybody help??
 

A:I Need Help, My Camera Wont Accept Its memory card

Read other 14 answers
RELEVANCY SCORE 51.2

I would like to get a yahoo and google toolbar for my mozilla firefox version 0.9.1 but it says it doesnt support toolbars. I dont seem to like IE as good as mozilla since ie is not as protected as mozilla. Will the newest version of mozilla let me have a toolbar so i can get rid of IE. Thanks

A:mozilla firefox wont accept toolbars

Also could you send me a link to the newest mozilla firefox browser update page. So i can update it. Thanks

Read other 24 answers