I brought a used DV6 laptop off Ebay fitted a new motherboard found out mouse works but the mouse clickers do not work so I replaced the mouse with a new one but found I have still got the same problem. Checked the software for the mouse and the mouse buttons are ticked updated the bios still no good. I am a PC engineer and this has got me
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)
Did you use the original cable from the top cover to the zif connector for the touchpad? There is a single cable that connects the touchpad and the clickers to the motherboard so logically the issue has to be the motherboard (which you just replaced), the touchpad module including the left and right clickers (which you just replaced) or the cable (did you replace?).Read other 2 answers
I have a usb wired trackball mouse. A few days ago the pointer was getting *stuck*, it wouldn't move for about an hour, then it would move again. This went on for another day or two, and now the past two days the trackball does not move the pointer at all. The right and left click work, I've been using mousekeys for the pointer until I can figure out the problem. I have uninstalled the software that came with the mouse (Logtech), let windows install it itself, reinstall the software - no change. All my other usb devices work on all the usb ports, but the trackball does not work on any of the usb ports. I went out and bought a cheap GE mouse with a ps/2 thing at the end, plugged that in, and that doesn't work either. Any help or suggestions would be greatly appreciated.
Are you on a laptop or a desktop?
Most laptops have a hot key or a button that enables/disables the pointer motion. Is it possible your accidentally hitting it?
I recently scanned my computer with superantispyware and it cleaned up a few things. I thought I had scanned with AVG earlier but I don't think I had as it started by itself this morning. I had to leave it - I saw it had found something 'bad' and have been trying to find out what it was now that it was all finished scanning. BUT I can just find records of viruses found in scans from a few months back which I didn't even know had been found.
Anyway, what I have are:
Trojan Horse Downloader.Zlob.MCQ
Trojan Horse Clicker.GMC
The clicker one is located in a programme I use a lot. I have had this trojan horse there before and when I 'fixed' it, it deleted the whole programme. Will I have to do this again??
I also posted on the malware thread with my HJT log, before I saw these trojan things. Why did superantispyware not pick these up? Are they really a problem?
Please help. Thanks.
sorry - i think I was looking at my virus vault.
The one it found today ('exploit') was also there.
should I empty my vault?
hi there, my mouse jumps around the screen, and upon restart neither my mouse or my keyboard would work without unplugging them and re-plugging them in...also i have alot of suspicious processes running that wont turn off and my internet is very jumpy and pages take along time to load...below is my HJT log...thanks for looking
Hello there thank you for taking the time to help me i really appreciate it..
below is my HJT log file, i also have an active scan log file which found a trojan i believe...any help would be greatly appreciated...thanks!
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:10:12 PM, on 10/19/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16608)
Boot mode: Normal
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\WINNT\system... Read more
Read other 9 answers
After about 1 minute the mouse scroll and keyboard stop working until I left click mouse. Tool bar on browser also greys out but comes back after left click. Video and sound also are choppy. Not sure if this is related. Flash keeps crashing. Any ideas whats wrong? Windows 7 pro. Asus desktop. This occurs on Firefox, Chrome and IE. This seemed to start after Microsoft update and Flash updates
First run Antivirus, Malware, and Spyware scans. Remove anything the programs find.
Note: if you need some suggestions on which tools to use, let me know.
Afterwards, test functionally of mouse and keyboard.
If no change, run System Restore, choose a Restore point before the issue started.
Again test behavior of mouse and keyboard.
If the issue has been resolved, go ahead and reinstall windows Updates.
I purchased an Asus ET2410IUTS-5 All-In-One PC. It came with a wireless full keyboard and mouse combo. The keyboard works fine but the mouse does nothing. All properties say both devices are installed and working properly but the mouse still does nothing. Model number on each device is as follows:
Keyboard - AK1L
Mouse - AM1L
Receiver - AR1L
Any help would be greatly appreciated!
Read other 13 answers
Hi, sorry, not very good at this sort of thing, but any help would be greatly appreciated.
1) Thursday night - mouse was working. Sunday evening, mouse is not working.
2) In the device manager it tells me I have two HID-compliant mouse drivers, location: "On USB Input Device" - I only have one USB input for my mouse. I tried disabling one of the drivers to see if it was a conflict problem. No luck.
Any ideas? The mouse is a "Wireless Optical Mouse M/N:SM-502C"
Thanks for reading
If you Goggle / bing / yahoo this info you gave........what........do you get ??
The mouse is a "Wireless Optical Mouse M/N:SM-502C"Click to expand...
I got this
The connection has timed out
The server at www.smallworld-us.com is taking too long to respond.
The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
Click to expand...
Hello, i happened to have a problem lately with mouse and mouse pointer. Yesterday i was playing a game and my pc suddenly started freezing and laging. So i hard reset him after that i boot into windows 8 and my mouse wasnt working at all. And pointer was no were to be seen either. Today i tried restoring pc but that dont help me. In bios and in advance startup options mouse is working. So i assume its in the windows. My specs are:
intel core i5-3570k 3.8ghz
16 gb ram
Western digital 1TB HDD
nvidia geforce gtx 650 1GB
fsp 750W PSU
I tried everything except reinstalling windows (OS was installed week ago).
I have heard of stability issues on those Gigabyte motherboards where people are having those problems with their mice.
Is your BIOS up to date? maybe it will contain an update on the website for the BIOS that improves system stability.
Is this a PS2 Mouse, or a USB mouse. If a USB, disconnect and then reconnect. If its a USB mouse that is wireless, make sure the battery is good, and if you have another computer, do a test.
Also try to boot from your Windows Installation Media and see if your mouse shows there, could give it a try.
If freezing and lagging during gaming, then could be possible overheating. Do you have a program installed like HWmonitor checking your CPU and GPU thermals. Make sure they aren't getting to hot.
If problem continues to persist. I would start troubleshooting. If you have another computer. or spare hard disk that is SATA, try installing windows on that, and try to duplicate the issue, if it comes back, rule out the hard drive.
Next would be either the GPU, RAM, or Motherboard. You would have to stress test the GPU by using Furmark, or similar program, like MSI Kombuster. If GPU stress test passes, move on to Memory.
while computer is powered down, and PSU off or unplugged. remove and reseat the memory modules, making sure they are fully seated, Do memory diagnostics with memtestx86 or something similar, and do a few passes, If memory check passes, Its more than likely there is a problem with the motherboard.
Weird problem for sure. You... Read more
Recently I installed a Microsoft wireless mouse and it is working. But the wired mouse is now sporadic and at times freezes. I have unplugged the wireless mouse and rebooted several times. Even did a system restore.
Also an Excel spreadsheet stopped working with the wired mouse just freezing the screen completely. Even after rebooting, the Excel will open and eventually I will get a cross hair image. I have tried to update the driver on the wired mouse but it says I already have the most uptodate one. I am running Windows 10 64 bit. I scanned with Malware antimalware and it eliminated over 300 items. I am not sure what is going on.
I hope I don't have a virus. I have Norton 360 with my Comcast subscription but now I cannot even see it in my taskbar. I have tried to uninstall and reinstall but nothing happens in Control Panel when I try to uninstall.
I have a Dell XPS desktop. As I write the wired mouse is not functioning. If I unplug the mouse and put it back in the mouse port it works for a minute or so and then just dies. I don't even see the red light at the bottom of the mouse sometimes. I just unplugged the wired mouse and now it is working. So it is very odd behavior. I imagine by the time I post this the wired mouse will freeze again as has been the case. In the interim while I wait for a reply, I'll contact Comcast and see if they can help me with the Norton virus software issue.
Tech Support Guy System Info Utility version 184.108.40.206
OS Version: Microso... Read more
Read other 7 answers
The mouse started to stray and stopped working in the middle of doing something, i.e. eBay, typing word and etc. which is very annoying and first of all, I lose all of the work done due to stopping of the mouse.
However, the mouse started working as if nothing wrong, once I restarted by 'force' restart ..... pushing the button in the middle of the PC. Otherwise, the PC is all fine and working OK.
I did apply Malwarebytes to combat the issue, however the issue does not resolve.
Any help on this would be truoly appreciated.
Did you try a different mouse? If you still have the same problem with a new mouse, see if there are any drivers for the mouse from it's manufacturers web site.
Also try a Clean Boot, if that works, then add one startup item at a time till the mouse acts weird again, then you know that is the problematic program.
I'm using my laptop in a desktop mode. but some days when i start up the computer the mouse is on (Sees the red optical light.)
But the cursor dont move when i move the mouse. when i drag the cable out and in again the ligh wont turn on. i change usb port and it works. 1-3 days later the same thing happends and i change to the previous one.
And if i put anything else in the port that stops working it wont recognize. its like it temporarely dies.
Is this becouse of the ports is 3.0 and the mouse is 2.0?
Have 3 usb ports, 1: Keyboard 2-3, Mouse.
Mouse: Logitech Gaming mouse g400.
I sort of have nearly them same problem only on my work pc. It seems to me if you leave it in for about 5 minutes it starts to work again See if leaving it in works.Read other 9 answers
i have a problem with my mouse cursor.... when it is performing something it become busy... right.. and sometimes the mouse cursor will rotate... or the working in background.... it doesnt rotate anymore.. i mean the windows aero scheme.. i am using a windows 7 os... i dnt know what is the problem,.. i alreay have the tuneup utilities 2010.. still no progree.. plls help me resolve my problem
Go to Control Panel>Mouse>Pointers and confirm everything is as you want it.Read other 9 answers
Before this round of trouble I discovered a problem with one of my graphics cards when they were in SLI with Blue screens and other nasty little things occuring when running Windows; I removed my secondary graphics card from the system to see if I could get a more stable OS, which I did.
I decided to test to see if the other graphics card running on it's own would lead to a stable system, however I was getting zeros on the VGA BIOS bootup screen and other problems before I even reached Windows Vista.
I did sucessfully boot into Vista and enter my password (using the keyboard) and move the mouse around, however once I had logged into my profile Vista began asking me if I wanted to install the drivers for the keyboard and mouse, I selected to update from the Internet and when Vista did not find any drivers for either device it disabled them.
Eventually I got both the keyboard and mouse functioning again by reinstalling Intellipoint pro and the Logitech setpoint.
While using the second graphics card I noted some distortions such as zeros appearing on the VGA BIOS screen during boot up, so I decided to switch out the graphics cards again, again this caused Vista to forget about my keyboard and mouse, I am however able to get onto Vista a combination of a cheap usb mouse I had laying around and the Vista on screen keyboard.
The fix I used previously (reinstalling of Intellipoint and Setpoint) has not works,I have also attempted to manually install the drivers through dev... Read more
This is very frustrating and I am at my wits end. I have tried 5 different wireless mice and two wireless keyboards with nearly no success.
HP Wireless mouse. Returned to store.
Logitech mk320 mouse/keyboard combo
Logitech m325 (two different ones)
iHome Mouse (works best actually)
Logitech v220 wireless mouse (very old)
Microsoft wireless mouse and keyboard 1000
With all of the mice I experience issues where the pointer disappears or seems stuck on elements on the screen, for example, the pointer seems to get stuck on the edges of windows. Pointer motion is erratic at best. With the mk320 and m325 mice the pointer does not stay in one place long enough along with the windows scroll up or down a line or two which leaves me with the pointing device version of "whack-a-mole" attempting to click on something. The v220 is a very old mouse and while it works is resolution is fairly low.
With the microsoft mouse it sometimes stops working and needs to be reset. The keyboard does the same and needs batteries removed and replaced. Sometimes that doesnt work and I need to reboot.
With the keyboard on the mk320 combo some keys don't work consistently and sometimes no keys work. Cycling power fixes the no keys issues, moving the keyboard away from the computer fixes the keys that don't work consistently otherwise.
This issue has persisted with windows 8.0 and 8.1 with two different motherboards. At no point has the wireless transceiver a... Read more
Hi jenny4, welcome ...
You obviously sound like you're no newbie to computers so forgive me for asking this but have you checked for Malware lately?
Needless to say, the fact that some mice work better than others is strange.
I just recently reinstalled Windows XP on my computer, my USB keyboard is working fine, but my mouse is not working, I tried it in all the USB ports for it and I am getting no response, I am getting a curser on screen but no movement nor am I able to click.
Read other 16 answers
I?ve got a Vista computer running service pack 2
Intel(R) Core(TM)2 Quad CPU [email protected]
RAM 4.00 GB
32 bit operating system
Quite often the mouse stops working. It?s not the mouse itself that it is the problem as the same mouse works on other computers okay. It also makes no difference if it?s a wireless mouse, a USB mouse or a serial mouse.
Restarting the computer doesn?t fix the mouse problem. However if I turn off the computer unplug all connections, (mouse, monitor, speakers etc) reconnect them all again, turn back on the computer the mouse will work for another day or two.
What I?ve done is take it to a computer repair place who replaced the power supply; I?ve since taken it back to the same computer repair shop when the replacing of the power supply hasn?t worked. However they seem incapable of fixing this problem, because of course once they connect a mouse, monitor etc the mouse starts to work again.
If I look on "Human Interface Devices" on that computer it only shows one device. It says that a Microsoft USB wheel mouse is working correctly, but the mouse in question on that computer is actually a serial mouse. None of the USB ports etc are showing up (?)
Anyone have any suggestions? (My computer knowledge is complete beginner) Maybe this is a hardware problem and perhaps I shouldn't be here...if so please forgive me and be kind
i just did a fresh install of windows 7 in my hp laptop,i had windows 8 but i dont like it,and i have no mouse pad or external mouse weorking so im not sure how to fix this.but the mouse pad works in safe mode.
Hi What is the exact Model Number of your Laptop ?..Read other 1 answers
Not really sure what genre this problem should be on. However i have recently purchased a Fujitsu Siemens Amilo Li2727 notebook. Working fine when i got it but i decided to use a usb mouse instead of touchpad now the touchpad has stopped working entirely even when usb mouse id plugged out. i really want to resolve the problem. i have already gone onto control panal, mouse but the touchpad does not come up as a device. Any help appriciated thanks.
Welcome to the forums.
Been a while since I had a laptop, but I seem to remember there being a setting on what to do with the touchpad when the mouse is plugged in. Unfortunately I don't remember where and have no way of finding it.
Have you tried rebooting with the mouse unplugged?
Sorry I can't be of more help. The manual for the laptop ought to have that info in it somewhere.
Hey, IM KimCaii cant do anything without my Mouse. ive 3 USB PORTS On my Laptop ( 2 on left & 1 on right)my Mouse tottaly not working on Left & Right Port. what the hell.. with this Lenovo..Thres Picture of My mouse driver.--------------------------------------------------------------------I've Tried to uninstall Mouse Driver , Enter SAfe Mode, Plug on diffrent port. with result of no luck--------------------------------------------------------------------i try on another laptop, that my mouse still working without problem. ive no idea with this thing, Hope your Help . Thanks
Mouse.png ?68 KB
Ive a little problem with my home desktop computer. There is my problem :
I have 3 usb mouses ( all are tested and working good ). Any of this mouses does not work on my desktop PC. When I join usb mouse, it works for 3 seconds until it writes : drivers sucessfully installed. Then it stops working. I tried to uninstall USB drivers and plug it again, tried all 4 usb ports, turned off save power on usb ports, also I tried USB -> PS2 reduction - do not work with this. Only PS2 mouse is working. I have also usb keyboard and there is not problem, only with mouses ( 2 genius mouses , 1 lenovo )
Windows XP professional sp3.
Can someone help me where can be problem ?
Thank you very much.
On 19 Sept you started this topic
Advice was offered the same day.
However you never responded
I fully appreciate there are many reasons why you may not have had chance to respond, but I hope you do not mind me raising the matter with you before I spend time helping on the mouse issue.
Hi guys, sorry but this is really urgent. My PC running windows 7 64bit is unable to detect any mouse.
Here is the problem, recently i updated my nvdia graphic card drivers through DriverMax and together I suppose another intel driver which I can't really remember. Ever since then my mouse started having problem. It was fine the first few times I could simply restart my pc, but today it is completely down. I bought new mouse and it prompted Device drivers cannot be installed blah blah. I tried all ports nothing works. My keyboard/bluetooth dongle and all others devices are working fine except mouse. No mouse can be installed.
I have backed up my old drivers before updating using DriverMax but I can't figure out a way to restore it because no mouse is working and I can't choose anything using keyboard.
By the way, my motherboard is msi TP67B+
You should be able to select most things using arrow keys/tab/enter
Press win key to open start menu
Arrows to select control panel > enter
Arrows to mouse > enter
Select hardware tab then you have access to mouse drivers section
Alternatively hold win key and tap pause key to enter system properties then tap tab to select left list and enter on device manager
My mouse pad is not functioning properly. I can move the cursor around but when I tap the mouse pad it doesn't click, I have to click the button on the bottom and I also cannot scroll with the pad anymore. It was working this morning and then all of a sudden I could no longer click or scroll by the mouse pad. I already went to the setting and looked and it says that it's enabled and I even restored to the default setting because that helped last time but it didn't help this time.
Mod's Edit: System model added to front of Subject line to improve visibility / clarity. Model number obtained from prior forum posting.
Everytime I turn on my computer a window pops up saying:
Windows did not detect a mouse attached your computer. You can safely attach a serial mouse to your computer now. To attach a mouse to a PS/2 mouse port, youmust first turn the computer off.
And then it says OKAY. This never used to happen before. This mouse is a new mouse so nothing could be wrong with it. I tried unplugging and plugging but still nothing happened. Please help me as soon as possible.
Have you tried a different mouse? Any new electronic equipment can fail shortly after you buy it. I had a new scanner fail on the 4th scan.
My mouse pad is not functioning properly. I can move the cursor around but when I tap the mouse pad it doesn't click, I have to click the button on the bottom and I also cannot scroll with the pad anymore. It was working this morning and then all of a sudden I could no longer click or scroll by the mouse pad. I already went to the setting and looked and it says that it's enabled and I even restored to the default setting because that helped last time but it didn't help this time.Read other answers
My Mom has a Compaq evo n600c laptop with windows xp. The mouse has quit working. It is not usb It is a touch pad. I had her reboot, I even told her how to shut down and start up in safemode, still does not work. I do not know what to do. Also for some reason her recycle ben Icon on her desktop is highlighted and she says a message keeps popping up that she has 3 programs running. Any suggestions would be highly appreciated.
From time to time, just occaionally, my mouse stops working. This happens during a period of inactivity (I have been away from desktop).
Sometimes a reboot solves it. This morning (I had left pc on all night) it was not working. It took 4 reboots to get it to work. After it rebooted, the pointer was in the center of the screen but was froze.
I have tried different mouses and that doesnt make a difference.
Read other 6 answers
I am running Windows Vista. Recently the scroll wheel on the mouse stopped working, after that the complete mouse stopped. I have tried 3 new 'mice' and they won't work either. Can anyone help? I have been in to the control panel but it is so difficult using the keyboard.Read other answers
My mouse suddenly stopped to work after I restarted my computer. I turned my computer off to clean the dust in it and then I replugged everything back. Everything seems to work perfectly. But after 5 seconds my mouse stopped moving and it's stuck. I tried to plug it in a different USB and it detect and it work for another 5 seconds then it stops. I tried everything I could. I am on Windows XP by the way.
Here is my spec:
Motherboard: Asus P5ND2-SLI
CPU: Intel Pentium 4 HT 3.0 Ghz
RAM: 4GB Samsung DDR2 667Mhz
I have a Logitech mouse but I don't know the model. It's plugged to a G15 Keyboard USB.
To allow temporary control with a mouse, I suggest to plug in either the USB mouse into a PS2 adapter type plug, or just use a regular old style PS2 type mouse, and then re-boot, and the system should detect it. Then you can go into the Device Manager to check on the driver for your Logitech USB mouse and keyboard, which may need to be updated or re-installed. Also there are some settings in the BIOS to enable USB.
today i was on my comp and the mouse ive been using for like a year just stopped worked. i unplugged it and plugged it back into the usb port and it work again , then 5 minets later it stops working again , and sais that its an unknow device , ive tried plugging it into all the diffrent usb ports , reinstalling it and it still does the same thing.
1.Go into the device Manager and uninstall the USB controllers,then restart the computer.
2.Try a different mouse.
I have WINXP and since yesterday, my Mouse is not working. When I boot up the computer the mouse "Freezes" and will not operate. The device manager says its working correctly and I've tried 2 other Mouse devices (is Mice applicable terminology here?) that I know are functioning and they operate the same--frozen. I have figured out how to manipulate the mouse with the keypad, but this very slow-going. I would appreciate ANY Help. THANK YOU!
(I will attempt to navigate to another posting and get the HIJACK THIS downloaded so I can post that for you to see---if I am successful I will post that as a follow-up)
Read other 16 answers
I have a HP ProBook 4710s.
The touchpad doesn't work properly, it can work a few minutes but then it just goes crazy and when I try to touch it the pointer goes everywhere and opens loads of programs or folders that I didn't even try to open. And it goes in random directions that I didn't even try to point it to.
So that's why I needed to use an USB mouse, but they can't work either.
I have a wireless USB mouse and one that is connected by wire but neither of them work.
They both used to and now they don't. I tried them at other computers but they work - the mouses aren't the problem.
It used to say "device not recognized " when I plug the one with a wire..But now it doesn't say anything and it doesn't work.
I reinstalled Windows but the problem is still here.
I tried deinstalling all the ports through device manager but the problem remains.
I can plug in any other USB thingy..like a flash drive or my camera or something and it all works.
What could be the problem and how to solve it?
Try resetting BIOS.
Hi yesterday the mouse took a funny turn and stopped moving completely I attached 4 different ones in turn but not one of them worked I tried unpluging and pluging them in whilst the pc was on and also closed the pc down and booted up again still none of them worked one of them was an optical mouse which lit up but wouldnt move.
I found a mouse which had a usb connection and that one works ok.
Can anyone tell me why the mouse port isn't working?
I'am using xp pro AMD Athlon XP 2200+ 1.81 GHz 512 MB
Could be as simple as a fault in the female receiving plug. I had a similar problem and managed to identify it by gently applying pressure twisting the plug back and forth making the mouse work briefly.
My mouse stopped working. I tried changing to another mouse but have the same problem. I've tried every USB port but that makes no difference. Occationally I can get it to work for a few seconds, but notlong enough for me to do anything. Could it be I need more memory? Before this started, it was an occasional thing. I started deleting unused games and other unused files. Now I can't get anything out of it. I did get it up in safe mode and ran a virus scan but it came back ok. Any suggestions?
Ok, its kind of tricky to do without a mouse, but I just went and did it, so its possible.
You need to get into the device manager and remove your mouse (uninstall driver). Also it wouldn't hurt to do the same for your USB.
To do it. Windows Key then arrow over to control panel and hit enter. Then arrow down to system, hit enter. Hit tab until you see a dotted box around General, then hit right arrow til you get to hardware, then hit tab to get that box around Device Manager and hit enter. Hit tab then arrow down to your mouse and hit the + key. Arrow down so you have the mouse highlighted hit enter. Tab until the box is around General again, then right arrow to Driver, then tab until Uninstall. Hit enter, hit enter again.
Do same for your USB hubs.
As part of trying to install a new joystick on my computer I was adviced to remove all entries under HID Devices in Device Manager.
This led to my mouse, which was one of those entries, to stop working.
When I plug it in Windows will try to install a correct driver, but does not succeed.
I wonder if You could help me fix this somehow, as it is rather time consuming to use the computer, especially the internet, with only a keyboard.
I got into the Device Manager through Start->Run->devmgmt.msc, and the mouse is listed under HID Devices as "Optical USB Mouse", with the telltale yellow exclamation mark next to it. Its status is "This device is not configured correctly (Code 1)., and it shows no driver under the driver tab.
Thank You very much,
my mouse is not working her the particular problem is my left click is not working so i have switched my switch buttobs please help me to fix the problem
Do you have a laptop? Is this a mousepad problem?
Try an external mouse - see if both buttons work.
Here's the challenge.. Tried both a PS2 mouse and a USB mouse. Neither work. Have done a system restore back to date when was working. This then gets the mouse working. When I open internet explorer. The mouse disappears again. System restore - back again. Have done a deep scan with NOD32 for bugs. Nothing found. How do I stop the mouse becoming deceased every time I open I.E. ?? (Windows XP) Have checked drivers - all appear O.K. when the mouse is there..
Problem has gone after countless reboots - mouse just appeared and now works fine. Computers.!!!!!
My mousepad does not have the orange light on and it doesnt work at all. A wirless and wired mouse works however the pad does not work with or without them connected. Could it be shut off somewhere that I'm not seeing? Any help is appreciated thanks!
Hello, please ensure you create a system restore point on the notebook and backup complete data.http://support.hp.com/us-en/document/c03327545 please set bios to defaults on notebook keep tapping ESC as you switch on the notebook once you get startup menu press f10 - do not save and exit - NO then press F9 - set bios defaults - yes- f10 - save and exit IF doenst work please update touchpad and bios from HP website http://support.hp.com/us-en
I'm an HP Employee.The opinions expressed here are my personal opinions, not of HP.Click on Thumbs up if my post helped you.Make it easier for other people to find solutions, by marking an answer ?Accept as Solution? if it solves your problem.Regards,Vijay
Ps/2 mouse not detected at startup. Yes, mouse is plugged in. "Add new hardware" does not find any new mouse. I can add the mouse myself in "Add new hardware", but mouse still not working. Device manager shows mouse with exclamation point icon. I removed the mouse in device mgr and restarted, still no mouse detected. Any suggestions?
Your mouse is not connected to an adapter is it?
Have you tried a different mouse?
Do you have a serial mouse you can try? The PS/2 mouse port may be bad.
I have been using my old iball mouse without any problem for years. Today I bought a new mouse (ps/2) and plugged into the cpu. But it was not working. Then I changed it by trying my old mouse and it was working fine. Again I tried with new mouse and I found it working and turned off the computer.
After sometime when I turned on the computer but my new mouse seems to be not working. I tried with my old mouse and both did not work.
For both mouses I am able to see the lights glowing in the mouse. Also I am able to see the mouse pointer in the screen. But I am not able to move the pointer / left click / right click or any other thing.
Advices are appreciated.
Read other 7 answers
When I use the right mouse all that happens is a circle going around and around. It take a long time before the right mouse works. Sometimes it never works. What can I so?
Try booting into safemode and check if right click works
I can start up computer in windows xp but than my mouse does not work i have tried to hit f10 to reboot but computer goes into safe mode and i cant change settings . I have switched both key board and mouse but it still does not work. I have a compaq presario
sr1320nx i would like to get into system recovery but with out a mouse i am stuck
any suggestions thanks
There is a bit to this but basically any mouse I buy does not work with my computer. What happened was I moved my computer from one wall to another, but am using the same socket. The mouse I was using started randomly disconnecting from from the computer but then immediately reconnecting. So I decided to see if it was the usb port and tried it in all my other ones, and it had the same problem. So I figure its a problem with the mouse and I use a temporary mouse that the scroll wheel doesn't work. This mouse has no problems working in any of the usb slots. So then I buy a new wired mouse. This one won't work at all. Figure it might be defective, bring it back and buy a logitech M510 wireless mouse. This one will not work also. It works on all the other computers in my house except for mine. I've tried it in every usb slot. I have tons of other stuff plugged into the USB slots that work no problem. No idea what is wrong, anyone have any ideas?
did you remove the plugs from the back of the box before moving it
check all plugs and cards are secure inside and out
uninstall the mouse from the device manager and reboot
see if it works ok with windows generic support
if it does install the drivers and software for the mouse and see if it continues to be ok
check the bios to see if the wired port is enabled
My mouse randomly freezes for short instants of time, then works again. I use a corded Logitech MX518 mouse through a USB port in WinXP. When it happens, the cursor freezes, the red light from underneath the mouse stops, and windows makes the usual "a USB device has been unplugged/plugged-in" sound. The frequency of the freezing is much higher when I play CounterStrike. If the mouse is left alone, it does not appear to ever freeze.
Rebooting seems to midly alleviate the problem, but very temporarily. I've tried other USB ports to no avail and I have a 420 watt power supply. When I use the PS2 adapter, the frequency of the freezing is considerably lower, but if it does go out with a PS2 I'm pretty much screwed as Windows will not re-detect my mouse. I use default drivers, not Logitechs, but I did have this same problem ages ago with my Microsoft IntellMouse 3.0. If anyone has a similar problem, please mention it and the things you tried, successful or not. Thanks for you help.
Take it easy,
Think I found my problem. When looking through my system information, I found the following device conflicts. Ironically enough, one exists with the USB + video card. Can someone tell me how to fix this?
I/O Port 0x00000000-0x00000CF7 PCI bus
I/O Port 0x00000000-0x00000CF7 Direct memory access controller
I/O Port 0x000003C0-0x000003DF Intel(R) 82875P Processor to AGP Controller - 2579
I/O... Read more
There is a setting in BIOS setup to assign an IRQ for VGA (under pnp). You can disable it if you like.
i have not been able to delete the ps2 from reloading, could this be conflicting with a new mouse driver (intellimouse elplorer wireless) newest driver installed, does not work...uninstalled then reinstalll. several things tried...still loading the ps/2 mouse. I am using a laptop, touch pad works fine...wireless mouse not moving, lights on etc. said driver is sinstalled correctly, removed and when reboot loads the ps/2 again?
not sure what to do next, restored. tec. tried may things, might ahve mad it worse, but touch pad works,
The Microsoft Explorer mouse (the Blue Track version) is not an Intellimouse. Make sure you select the Explorer mouse when you install the software (or change it in the settings and reboot). Neither mouse uses PS/2. Both are USB mice. If there is a conflict, it's with your USB and PS/2. It has nothing to do with the mouse.
Try uninstalling the software and just use the mouse. Windows 98 and up already fully support the mouse and don't need the additional software.