Over 1 million tech questions and answers.

touch pad suddenly stopped working

Q: touch pad suddenly stopped working

Hello, I have an Envy17 and yesterday the touchpad suddenly stopped. No warning no nothing. It was working fine and then I closed the laptop for a few (did not shut down all the way) and the next time I opened it (bout an hr later) the pad was dead. Tried uninstalling and reinstalling the driver, numerous re-boots and installing computer/windows updates. Still does not work. Have tried to double click the opper corner in case it was accidentally turned off but still nothing. When you go into settings, it says it is working properly. Anything else I can try? ThanksLacyayn

Preferred Solution: touch pad suddenly stopped working

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: touch pad suddenly stopped working

Need model number but have you tried going into F2 diagnostics and see if there is a pointer device test you can run from there.

Read other 1 answers

My P51 touch pad has suddenly stopped working. If I delete the drivers then basic functionaly of the touch pad is available (only able to move the mouse cursor) When the driver is installed, I get the following error and the touch pad does not work at all.The nipple in the keyboard does work. A timeout was reached (30000 milliseconds) while waiting for the SynTPEnhService service to connect.

Read other answers

Hello,  I have an Envy17 and yesterday the touchpad suddenly stopped. No warning no nothing. It was working fine and then I closed the laptop for a few (did not shut down all the way) and the next time I opened it (bout an hr later) the pad was dead. Tried uninstalling and reinstalling the driver, numerous re-boots and installing computer/windows updates. Still does  not work. Have tried to double click the opper corner in case it was accidentally turned off but still nothing. When you go into settings, it says it is working properly. Anything else I can try?  ThanksLacyayn

Read other answers

Hi - the touch pad on my Satellite Pro L870-18G (Windows 8) has suddenly stopped working (after less than 2 months' use) - which makes the laptop rather difficult to use. According to the device manager there is nothing wrong with the driver - but I tried to reinstall anyway (didn't help).
Do these things normally suddenly fail?

Why does the device manager say there is no problem when there quite clearly is?

A:Satellite Pro L870 - Touch-pad has suddenly stopped working

Maybe the touchpad is disabled. Is there any reaction when you use FN+F5 key combination?

Read other 4 answers

So out of nowhere, my 7737's touch screen has stopped responding to touch.  Mouse works just fine.  Device manager has the monitor driver listed as a "generic PnP monitor", which sounds suspicious... and under Human Interface drivers, there is nothing listed for touchscreens, just airplane mode ***...  I have restarted, driver updated, etc. to no avail.  Any ideas?

Read other answers

Hi everyone, I have a Lenovo X220 Tablet that has touch screen and pen. They suddenly stopped working today. The LCD screen still works pefectly fine, however. The touch screen is enabled on the touch settings. When I try to calibrate, it does not detect my finger or the pen. I also noticed that when I tried to reinstall the driver and it said "a supported tablet was not found on this system". I have the most recent bios. I am running Windows 7 that came with the laptop. All windows updates completed. Is it possible for the digitizer to be defective, but the LCD screen to work perfectly fine?Could it be just a ribbon failure?Which part would need to be replaced, if this is the case? Any advice would be appreciated. Thank you.

A:X220 tablet touch screen suddenly stopped working

Even though it looks like a single device, it is really 3 separate ones.  There is a basic panel.  There is a static discharge digitizer in the front to sense finger touches.  There is a second Wacom digitizer behind the panel to detect the pen.  Any of them can fail.  The wires in the cable can also crack.  Since both digitizers failed, I would first look in device manager to see if there could be a problem with a USB hub.  (digitizers both connect as USB devices.)  My next guess would be the cable.  Sorry I cannot be more definite.

Read other 6 answers

All drivers are fine. I have tried disabling and enabling & reinstalling HID touch screen drivers but it didnot work. I have also reset the PC . But i didn't fix. I dont think its a hardware problem. Any solution??   

Read other answers

My Ideapad S415 touch screen has suddenly stopped working.  I've had a tech connect to my PC and try a BIOS reload of default settings, plus unistalling all "HID" devices in Device Manager with no resolution.  I've also tried a system restore with no luck. The system properties does see the touch capability. Suggestions? Thanks.

Go to Solution.

A:Ideapad S415 Touch - touch screen stopped working

hi Hersh,
Welcome to Lenovo Community Forums!
First do a Power Drain 
     (If the battery is removable)
            Remove AC and Battery and hold the power button down for 15 sec.
               Turn the computer back on and see if the Touch capability is now detected under System Properties,
                  If not
         I suggest you contact Lenovo Technical Team about the Issue as this may be a device detection issue.
       Lenovo Technical Team
Solid Cruver

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers

My touch screen stopped working in early October without myself doing any changes that I'm aware of. The Windows Anniversary update came at that time and might be involved.In the Device Manager, there is no touch screen under "Mice and other pointing devices". There is a "HID compatible touch screen" under HID, which I've tried to disable and to uninstall. It comes back after reboot, but still no function.It could of course be a hardware problem, but it's usually not.... /Andreas

Read other answers

So one day I was using a laptop wirelessly when the internet just suddenly turned off. I checked my modem and it was working fine but when I checked my router, the lights were on but not blinking. it was just a steady light. when I checked for a wireless network the name of the network I usually use didnt show up.

I tried unplugging everything and plugging everything back in again and I tried pressing the reset button on the back of the router. Can anyone help?

Thanks so much

P.S. my router is a linksys WRT300N Wireless-N Broadband router

A:Wireless router suddenly stopped working (Lights still working though)

what devices do you have connected the router anything else wireless
make and model of the pc

does the PC work if you connect to the router by a cable ?
if not
try connecting directly to the modem and see if that works OK

we need to see some details, which will mean you need to copy to a working PC
{run Xirrus Wi-Fi Inspector} Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC

Direct link to the program is here http://www.xirrus.com/library/wifi_download_redirect.php
Then run and install the program
if you get an error - You need NET Framework installed for the WiFi Inspector to function.

Run the program

post a screen shot of the program running - if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information, and also post which network "Adapter Name" (1st column) is yours on the list

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.
----------------------------------------------------------------------... Read more

Read other 2 answers

touch pad on HP Mini 110 stopped working for awhile ago.
do u know how to fix this?

A:touch pad stopped working

This may sound odd, but remove the battery, then press and hold the power button for 30 seconds or so. Now plug it in to AC and see if the touchpad is working again. A Guy

Read other 1 answers

My touch pad has completely stopped working.

I have a sony VAIO laptop and it doesn't have the eraser-looking mouse in te middle of the keyboard. I have another normal mouse plugged into the USB, but the clicky buttons undeneath the touch pad and the touch pad itself have just stopped working!

I don't have any idea what could be wrong, but any help would be appreciated. THANK YOU!!!!

A:Touch pad stopped working!!!

Hi check in device manager for any error flags ie yellow ! or red Xs, if you have then go to the sony support site for your model and download and install the driver,you may wish to download the driver for the touchpad and install it and see if it sorts your issue

Read other 4 answers

I have a HP Envy TouchSmart m6 Sleekbook. I use the touch pad instead of a mouse. Every time I touched my laptop yesterday I got shocked & it instantly shut down. Today I did not get shocked, but the touch pad does not work. I have a wireless mouse to use at the moment but would like to use the touch pad instead. This is a screen shot of what it says under settings. "The device cannot start (Code 10)". Can anyone help me get it working again? It isn't simply disabled where I can change it to enable. Thank you

Read other answers

Okay, this is the weirdest problem I've ever hard with computers. Here's what happened:

1. I had a few years old Pentium D 2,8GHz processor running on Asus P5VDC-X mobo. PQI 566MHz DDR2 and GF 7600GS 256mb PCI-E, 350W power.
2. I updated the mobo to Asus P5L-MX to support faster PCI-E cards. Everything worked fine, despite the processor ran too hot (58C on high use)
3. Because of the overheating I replaced the thermal paste but it had no effect on the temperature.
4. I thought I used too much paste so I replaced the paste again.
5. Bang, no video when I turn on the computer. I tried taking off everything part by part but nothing worked. It didn't work even when I only had processor and used the integrated graphics port. Tried resetting the bios too.
6. Nothing worked so I put back the old P5VDC-X and it worked like charm.
7. I thought it was logical that the problem was caused because of the mobo so I bought a new one, Asrock G31M-S.
8. No video... Did the same steps to this one too. It also had integrated gfx but it didn't work either.
9. The old P5VDC-X still works.

So I have no idea what's causing the problem. Is it the CPU? Mobo? PSU? RAM? I have no speaker on my case so I can't hear any beeps, but it won't start loading the OS from the hardrive and my USB mouse won't turn on. Tried using a differen't monitor too.

The main point is why it stopped working suddenly on new mobo's but still works with the old P5VDC-X? A... Read more

A:New mobos suddenly stopped working, old mobo working

Two new motherboards tells us you made the same simple install error in both of them.
Tell us more about power supply, memory, cable.
Did you make sure the memory was correct for both new boards, and what is the memory on the old board. Would also like to know the power supply and other hard ware.
What happens with the most basic, simple install. Does everything light up?

If you used the same hard drive with the same Windows install on the two motherboards, that is the problem. Windows has detected that you have changed the motherboard and will not operate unless you reinstall Windows on the drive on each new motherboard... One install for each motherboard.
My guess is that you will be fine if you change hard drives or do reinstalls or repair installs of the Windows on the new motherboard.

Read other 2 answers

I just got my ideapad 110 touch Friday. After using it for awhile and recieving a brief windows 10 update my touch screen quit working. How can i fix this?

Read other answers

My scroll bar on my touchpad stopped working. I have an HP laptop.

A:scroll bar on touch pad stopped working

Is the touchpad a SYNAPTICS or ALPS or some other brand?

What version of Windows are you using?

What model name and model number is your HP laptop?


Read other 3 answers

I have a Dell Latitude 3540 and I use to be able to touch the screen and it would click on what I touched, it's stopped working, can anyone help?

Read other answers

My touch screen stopped working about 2 days ago. The computer is updated, I ran the HP support and nothing happened. I ran also 2 tests, those that you can enter using F2. Everything seemed to be fine but it simply doesn't work, no matter if it is in PC or tablet mode. The result is the same. 

Read other answers

My HP Pavillion laptop touch screen stopped working several months ago and I have not been able to fix it. I have gone into the device manager as I have seen on other forums and my touch screen didnt even show up under human interfacing. How can I get my touch screen to work again without having to take it in? I am not super tech savvy. I don't recall doing an update before it stopped working.

A:Touch Screen Stopped Working

@cfree2017, welcome to the forum. When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.

Read other 2 answers

My external drive has stopped working. It turns on alright but does not make its usual noises nor does it show that it is there on the computer. I don't get any error messages or anything. My husband has another Maxtor One Touch III hooked up to his laptop and it works fine. I tried hooking my Maxtor to his laptop and it does the same thing...it turns on but and that is it (It does not show up as being connected). I also exchanged the powercord and USB conncection with my husband's Maxtor cords without any changes. I have all my music and photos on my Maxtor III and would like to get it back. Any help is appreciated.

Read other answers

I have an HP c2k73ua#aba and the touch screen just stopped working. It does not show up in device manager unless I look for hidden devices. Also in the USB there is an error (unknownUBS device device discriptor reqquest failed) I am not sure if this has anything to do with it.

Read other answers

Just bought the Samsung All in One PC and the Touch Screen stopped working:


This is new territory for me although I know my way around Windows.

Any assistance on how to get the Touch Screen back on?

A:Touch screen stopped working

Read other 13 answers

My touch screen stopped working about 2 days ago. The computer is updated, I ran the HP support and nothing happened. I ran also 2 tests, those that you can enter using F2. Everything seemed to be fine but it simply doesn't work, no matter if it is in PC or tablet mode. The result is the same. 

A:touch screen stopped working

  Hi @natalia1818, Welcome to the HP Support Community! I read from your posts that you are having an issue with your HP Pavilion 11x360 PC Notebook and the Touchscreen not working correctly. You might need to check that the Touchscreen is enabled on the Notebook. Here is a listing on how to do that: Press the Windows logo key + X.Select Device Manager from the list.Click the little arrow next to Human Interface Devices to expand the list.Click the touch screen driverRight-click, and select enable from the list.Confirm you want to enable. You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook. I suggest at least 4 days ago as it will make sure to catch what changed the settings. When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues. Please let me know how this goes. If this post helps you to resolve the issue you can click the Thumbs up icon to show gratitude! Thanks.

Read other 1 answers

The touchpad stopped working a few weeks back, thought it might fix itself so I've left it and been using a mouse through the USB. Then that was playing up so decided to look for a solution to the touchpad issue... Read on here about it being the driver, so I updated that through the website but then whenever the touchpad was touched, the laptop would go to a blue screen with the stop code: KMODE EXCEPTION NOT HANDLED and then 'What failed: ETD.sys I have now done something so that this doesn't happen when the touchpad is used (not entirely sure what I did), so I'm not getting a blue screen, but it still doesn't work to move the pointer!! It says the driver is there and all uptodate when I look through the device manager.. Thank you!

Read other answers

My touch screen stopped working about a year after I bought this computer. Right before it stopped working completely random items started opening on the computer as if there was a phantom clicking on things. I thought it was a virus but none was ever found by many anti-virus scans and nothing else in the computer was harmed. I'm leaning more to thinking that it is a hardware issue. Any help is apprecaited!  Thanks!

Read other answers

I have used my touch screen for 2 years and now it stopped working. I followed the troubleshooting and it actually says in the product description that 'no pen or touch input available for this display'!!!! I haven't done any upgrades or changes, this seems to be out of the blue!

Read other answers

Hi, please I need help. I own an hp pavilion sleekbook 15. Just out of the blue my mouse and touch pad stopped working after a restart. I download a new driver from the hp website, synaptic touch ps/2, installed it and still nothing. After several tries I don't know what to do anymore. I checked the device manager and nothing is installed, when I check the control panel it says reinstal

A:mouse and touch pad stopped working

Hi ProcuradorGeral,

So in your control panel under mouse does it have a touch pad at all? Is it enabled in the BIOS, as I know some laptops give you that option to disable it. By mouse stopped working do you have an external mouse? Is it USB?



Read other 13 answers

hi ya. im hoping someone can help me with an issue im having my laptop. for some reason my touch pad and keyboard stop working. i have tried reintalling windows to correct the issue which it does for a day and then the same thing happens again. when i checked in device manager and clicked on PS/2 mouse it said there was a code 10 error. if i uninstall ps/2 and restart the laptop it fixes the issue for a while, then it occurs again. my OS is windows 7, i think it was upgraded from windows vista (i only recently purchased this laptop 2nd hand) so im not 100% sure on that. the driver date for the ps/2 compatible mouse is 6/21/2006. i have tried looking on the website for a more updated keypad driver but i could not seem to find one. it seems to have every other driver apart for keypad driver.

any help would be greatly appreciated

A:Touch pad/keyboard has stopped working.

just replying as I'm having exactly the same issue, though on Win 8. Somehow the drivers were gone for the keyboard and touch pad, and while I resolved the touchpad issue by reinstalling the driver, but still cannot find the keyboard one.


Read other 2 answers

Hi friends,New to the forum, and I'm hoping someone has a solution for me. I have been having an issue with my touchscreen... it doesn't respond at all. It had been working, and while I don't know exactly when it stopped, it's not working now. I have a Pavillion 15-n023cl, running on up-to-date Windows 10 64-bit. Everything else is working fine...the display is in pristine condition, and there are no cracks, stray lines, scratches, or anything out of the ordinary on the screen that would make me believe it's a screen issue. I've tried just about everything on the forums and on the Internet, including: Cleaned off the screen with a microfiber screen-wipe Restarted the laptop...removed the power cord and battery, tried again...still not workingUpdated all drivers via the HP driver appDid a system restore back to a point where I knew the touch screen had been workingReinstalled AMD drivers and input driversFlashed the bios to the most current versionI've looked in the setup for a setting that would control the touch screenIn Device Manager, under Human Interface Devices, there are only two drivers listed: HID- compliant wireless radio controls and HP Wireless Button Driver. Under Hidden Devices, there is an item HID-compliant touch screen. However, it's grayed out, and right clicking only gives me the options to Update Driver Software, Uninstall, Scan for hardware changes, and Properties. No Enable.   I've tried all of them..including uninstall... Read more

Read other answers

Hi, one day I started my laptop and the SSD in it (MZ-7PC256D) suddenly stopped working.

What options do I have to get it working, or atleast recover the data in it.

I tried putting it in another laptop or checking in BIOS, it's simply not getting detected.

The SSD gets super hot when I connect it to the laptop and start it.

A:SSD suddenly stopped working.

Not to be harsh, but when you get it working again thru what ever means you might have to do, make an image on a flash drive or what ever you choose and then, if the SSD has failed completely, install a new one and use the image to bring you back to the time of your last backup.

Read other 1 answers

My ps2 just suddenly stopped working, it wasnt at all gradual and it just makes a lot of clicking/loud/grinding (not very nice!!) sounds! i tried the solution that involved rotating the white clog in my ps2 which just changed the sounds - at one position it doesn't make the sounds but then doesn't seem to be able to read any discs. i marked the original position so i've now returned it to its original state but i would be very grateful for any suggestions on how to solve the problem!! (i've also tried cleaning the laser)
Cheers, Rich

A:ps2 suddenly stopped working

call sony and descirbe ur problem. chances are they may fix it for free

Read other 2 answers

Good morning everyone, and a Merry Christmas!

I'm going to try to make this as brief as possible, while still including every detail I possibly can.

Today I received a few cool gadgets for Christmas that I wanted to install on my PC. I realized I was short on USB slots, so I tried to install a secondary set of USB slots. I plugged it in wrong twice in a row, due to me misreading my motherboard. After a few restarts, my computer wouldn't boot. I attempted to clear my CMOS, which didn't help. I then turned off my power supply's switch, then turned it back on. After I did this my PC booted, but I was fronted with a boot screen that said the CMOS settings were wrong. I was confused as to what this meant, and my options were F1 to Bios, or F2 to default settings and continue. After booting, my Razer Deathadder quit working. Now, at this point, I'm not sure why exactly I did this, but I reinstalled Windows. I am using Windows XP Pro -32 bit. After reinstalling all my drivers, I realized that NONE of my USB ports were working. My keyboard, mouse, webcam, nothing worked. I updated my Windows, BIOS, drivers, everything is new.

In the screen for Hardware, all my Root USB kits have exclamation points, and it says they aren't functioning properly. I have NO idea what the hell is going on, and if anyone has any ideas or comments, please please share them with me.

I'm thinking that when I reset the CMOS perhaps something malfunctioned on my mainboard a... Read more

A:USB suddenly stopped working

if you dont have service pack 2 install it then reinstall the usb drivers that come with sp2

Read other 2 answers

hi folks,
my wife tried to install a labtec webcam last night and all of a sudden the mouse, printer and webcam stopped working (all connected to USB ports). i tried checking the device manager and it says USB is working properly. i even restored my computer to friday's date to no avail. all devices were connected to the computer last month before we moved to a new apartment and mouse and printer were ok last night before the installation of the webcam.
thanks a lot for your help.

hp pavilion 510c
windows xp service pack 2

A:USB suddenly stopped working

Read other 12 answers

Hi all,

I run a network at home, 2 computers, both running xp. One connecting directly to cable broadband modem (computer 1) with the two computers linked by a single crossover cable. For the past year or so I have happily shared the internet connection as well as the printer and numerous files but today when I booted them up computer 2 - the one not connected to the modem - simply gave me a "Limited or no connectivity", I'd had the problem before and had in the past easily fixed it by repairing the connection however now it simply hangs on renewing ip address.

I've tried restarting computers, disabling and enabling connections, nothing I do seems to work. Any help is greatly appreciated and any more information I need to provide just ask.

Thanks in advance, Andrew

I just went to check on firewall on host computer, when I tried to open up firewall settings i recieved something along the lines of "Windows firewall and internet connection sharing are not currently running, would you like to start running them?" Ridiculous i could spend 2 hours on something and solve it like that >.<

Out of curiosity, how did my internet connection service just "turn itself off"? seems strange to me,

A:LAN suddenly stopped working

Could be from an error to spyware

Read other 2 answers

My IDE CD R/RW has suddenly stopped working. I can eject the tray but when I close it the LED stays on constanly and i can't hear the usual whirring noise when the CD is just starting up.

I've had my computer for around 10 months now and everything has been alright up until now.
I've scanned for viruses, nothing.
No settings have been changed.
So what could it be?

P4 1.9
256Mb RAM
NEC DVD drive

A:cd-rw suddenly stopped working help!!

Can you boot with a Windows bootable disk, choose w/cdrom support........(the cdrom drive letter will move one letter ahead from where you know it to be now) then put a disk in the drive, change to that drive letter, and type

and get a directory of the cdrom?

Also, in device manager, does the drive appear there without any yellow exclamation marks on IDE controllers?

Read other 1 answers

My wife has Win7 on her laptop. Last night IE 32 bit was working fine. Now when she clicks on the IE icon it does nothing. If i go into the start<all programs<IE 64 bit....then IE 64 bit works.

What has happened and what should I do to fix it.

A:IE 32 bit suddenly stopped working

I'm not trying to be rude really that is not my intention this is just a suggestion

STOP USING INTERNET EXPLORER it is the most vulnerable virus prone browser out there I know it's the world standard .... but it's junk .... sorry .... just get Firefox
and you will never have these problems again
(granted you have to set Firefox up the way you want )

Someone will help with the IE issue but that's my two cents, 2? <<<< check that out
here's how, hold alt and type 0162 (alt+0162)


***the shortcut proly lost the path go to program files find IE and create a new shortcut on the desktop you can then drag that to the start menu or whereever******

Cheers Again

Read other 5 answers

Hey guys,

So I put together a new PC running Windows 10 Pro around 3 months ago and everything was working perfect till 2 days ago when my mic suddenly stopped working. I use a Steelseries Siberia V2 headset and the headphones work fine, but the mic is not picking up any noise at all. I tried plugging in both the back and front ports and my realtek always detects that a mic has been plugged in, but it simply won't work. I thought maybe my mic got busted so I also tried using an A4 Tech headset that I had lying around in the office but it has the same issue, the mic won't work. I looked around online for possible solutions and tried the following with no luck:
Ensured the mic was set as the default device and that its volume settings were maxed out.Tried disabling all sound effects (noise suppression, acoustic echo cancellation etc).Uninstalled all audio drivers and reinstalled the latest realtek drivers on my motherboard's webpage: GIGABYTE - Motherboard - Socket 1151 - GA-Z170MX-Gaming 5 (rev. 1.0) Uninstalled all audio drivers and reinstalled the latest realtek drivers on realtek's own webpage: RealtekUninstalled all audio drivers and let Windows auto-install drivers.I even uninstalled all realtek drivers and tried using the standard "high definition audio device drivers."

Basically tried everything in this link: Microphone Not Working in Windows 10? | Win 10 FAQ

The conclusion was the same with everything I tried, the sound worked fine in both my speakers a... Read more

A:Mic suddenly stopped working

Hi, try Settings, search Sound, Find and fix audio recording problems.

Otherwise sounds suspiciously like a hardware issue.. internal connector?

Read other answers


I've been using the Microsoft Wireless Broadband router (MN-500) to connect to the internet. This afternoon, while I was away, the wireless connection was suddenly lost. The internet is fine, because when i plug my computer directly into the router (via ethernet), i am able to access the internet. However, the router does not seem to broadcast a wireless signal for the LAN.

I've reset the router, both manually and via the software and reconfigured the network. After this process, the Wireless Network sometimes appears momentarily in Windows...but the connection drops before it can connect.

All the lights on the router light up as normal and it indicates that both the wireless LAN and the WAN are working properly. I have no idea why I can't connect to the network wirelessly though...

Any thoughts?


A:MN-500 Suddenly Stopped working

Read other 7 answers

before I shut down last night I got update then shut down, OK done that, now when I turned on this morning the touch screen does not work......

Read other answers

I've had nothing but problems since my computer updated to windows 10, sadly I missed deadline to go back to windows 8.1. The touch screen barely worked after the update and has stopped working all together now. I've tried all trouble shooting suggested. After trouble shooting tried to call for support only to find out I'd have to pay because my computer is over 12 months old.

Read other answers

so i left the computer on over-night and now, i can't use touch to scroll up and down in lists / web pages any more. is there something i can re-initiate to get this to work again?

Read other answers

My Helix (windows 8.1) is 2 years old now, It was working fine until las tnight, but when I switched on this morning, I found there is no reaction from Track point and touch pad. There was no driver update/windows update last night, and did not give any physical shock onto the Helix between last night and this morning.  Today, I tried to update track point driver from device manager, but it says my version is the latest and not necessary to update. I have absolutely no idea what cause this problem and how to solve. I would be appreciated if anyone knowledgeable could give me helping hand. Many thanks 

A:Track point / touch pad stopped working all of sud...

Are you still under warranty?  I would turn it off and unplug it from the dock.  Push a straightened paperclip gently into the reset hole and hold it for 5 seconds.  I believe that on that model, it is on the left side.

Read other 1 answers

My laptop's touch screen function stopped working just a while ago. When I shut down my laptop, tere's this windows update that lasted for more or less an hour. After that, the touch screen just stopped working. Note that there hasn't been any program installation prior to the antivirus uninstallation - all programs and files contained in the laptop is as it was the moment I bought it. *Laptop's running Windows 8 Single Language


Go to Solution.

A:S410p Touch Screen Stopped Working

hi klawdin,
Welcome to Lenovo Community Forums!
Open Device Manager and Uninstall all That start with HID- under Human interface devices.
REstart the system and see if that works.
Also Perform a Power Drain.
Hope this helps

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers

My laptop keyboard stopped working.When I running diagnostics on keyboard it never gets past obtaining required tools.  My laptop keyboard is not working?  Touch pad is OK.

A:keyboard stopped working. Touch pad still works.

RWMOSKY,In order for the forum members to help resolve your computer issue you will need to post the model of the computer as well as the OS that is installed. 

Read other 1 answers