Over 1 million tech questions and answers.

PC ran into a problem with DMP error

Q: PC ran into a problem with DMP error

Recently i have setup OS 8.1 and install drivers with driver pack solution online. After 7 days my laptop sometimes shutdown with blue screen error. The error page are following here:

please give me the specif solutions .

Read other answers
Preferred Solution: PC ran into a problem with DMP error

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)


I get all those messages at start up, plus superfetch has stopped working, and sometimes windows explorer has stopped working. I know it's some type of virus from something. So far safe mode has been working (slowly). Yesterday I had a friend reinstall(?) vista on it so I'm not sure if it would qualify as a legal copy or not anymore but it was actually much worse before that. It couldn't even start up right normal or safe mode.

it is a hp G60t-200, and the OS is vista, I'm not sure what other info would be needed for this. Please help if you can.

Read other answers

Hi, I have looked at all the different discussion threads and tried almost every single suggestion made but still have'nt had any luck so far.
I can receive email but can't send any. What triggered this error is that, I recently moved from London to New York and I am now using a different ISP to connect to the internet. But my old setting should work (since it has worked in the past when I logged in from hotel or other locations using different ISPs.)

I have tried changing the port numbers etc, but I keep getting back this error message.

"The connection to the server has failed. Subject 'Test', Account: 'O2 Email', Server: 'smtp.o2.co.uk', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E"

Any help will be much appreciated.


A:Send problem with Windows Mail. Socket Error: 10060, Error Number: 0x800CCC0E

You must go to the website of the new email provider to get the correct settings. Not just port numbers but all other settings as well.

Read other 5 answers

I can't open Hyperlinks, for example in this forum.

My version of IE 6 is 6.0.2900.2180.xpsp_sp2_gdr.061219-0316. When I try to open the hyperlinks I get the Error "IE has encountered a problem and must close" and the Error Tech shows Comct132.dll???

I have Googled and can't find out much. I did a search on my notebook and that .dll is not there.

I thought that I had fixed the problem by going to the CP>Add/Remove>Set Programs Access Defaults.
The setting there is Custom for all of the programs, Web Browser,email,media player,instant messaging, java virtual machine.

In all of them it says "use my current..."

So I changed Web Browser to Internet Explorer instead of "use my current web browser" but it won't stick and I am then back to not being able to open Hyperlinks.

Took the notebook to 2 independent tech's that I know and they checked the notebook for nasties and found nothing. I should say that there are no other peculiarities like Home page changes or being redirected to other sights, just this irritating inability to Open Hyperlinks.

I googled Comct132.dll and found virtually nothing, I don't know what this is??Being the Easter weekend here there are no techs available and I was trying to catch up with work and can't open critical hyperlinks.

I hope that someone has some ideas, thankyou for your time.

A:IE 6 encounters problem and must close Error Comct132.dll Tech Error??

Read other 8 answers

I am having three major issues and somehow I think they are all related. Please help!

1. A few days ago I started receiving at startup the following error:
"Data Execution Prevention - To help protect your computer windows as closed this program

Name: Windows Explorer
Publisher: Microsoft Corp"

I had gone to MyComputer, properties and put windows explorer in the exception list. And it loaded up ok after that.
​2. This morning it started giving the same error plus another one:
"DrWatson Postmortem Debugger has encountered a poblem" and has closed.
​3. In addition to the above, I can't click or start anything. The screen looks like it's loaded up correctly but then I am not able to start or use any program. The only option I can choose is to see the task manager. And being not computer savvy am unable to pinpoint anything abnormal.

Now the screensaver has come on and moving the mouse doesn't take it back to the normal screen. I really am not sure what the problem is.

I am writing this post from another PC.

Please help as to what I should do! Thank you!

A:Solved: Windows XP DEP error and now Drwatson.exe error and loading problem

You actually may have picked up a virus and Windows is preventing the running of explorer in order to prevent it from carrying out its intended task(s). It might also just be a bug that developed on its own. I don't want to tell you to disable DEP in this case since you don't seem to be initiating any thing of your own that might trigger DEP falsely.

I would see if you can start in safe mode (tap F5 key continuously as the system is starting--or the F8 key can get you there too) and then run System Restore and see if you can go back to a restore point one or two periods before the trouble began.

If that's successful then at the next bootup type mrt and OK that in the Run... window (Windows Key + R). You should get the Microsoft Windows Malicious Software Removal Tool start module to come up from that and it might say you can download the latest updates at such and such before running it. If you have the latest update, just ok it to run and have it do a deep scan of your system.

Hopefully if it was just some registry corruption, the system restore will have fixed that and if its something more malevalent the MRT tool will find and remove it.

Read other 2 answers

severe outlook 2007 problem. error when trying to send emails. (returned an unknown error). i can't find any solution for that and i'm really desperate."The messaging interface has returned an unknown error. If the problem persists, restart Outlook."i've tried to do many things but it doesn't worked.i tried to install windows xp again and again and to make a new microsoft emails file (pst). and tried to make new profiles and many many other things.can anyone lead me to a solution?i want to use email but just can't.thanks,~Mod Edit: Moved topic to more appropriate forum~ TMacK

A:Severe Outlook 2007 Problem. Error When Trying To Send Emails. (returned An Unknown Error). I Can't Find Any Solution For T...

Have you carefully checked the incoming and outgoing server addresses? In addition to having that correctly entered, check for any typos-a comma (,) instead of a dot (.). Is everything spelled correctly? (I once had an Outlook Express issue and after an hour of looking over the settings saw my mistake, I'd entered ,net instead of .net)

If you are trying to use Outlook with your internet providers mail, go to your providers website. Look for help sections, faq's, etc. You most likely will find the correct settings there.

Read other 1 answers

so i have a dell inspiron 8500 and ive been having a NSIS error. it started friday. i dont know much about it sorry. help!

A:NSIS Error: error launch installer. Problem

Read other 12 answers

Basically, I have a HP Pavilion laptop, only 4 months old, pretty good specs, running on windows vista. At first, it was working like a dream, and I didnt believe what I was hearing about problems with vista. However, recently, I have noticed that anything I plug in2 any of the usb drives (be it ipod, external hard drive, or even a brand new printer) isnt installing. They are recognised alright, but instead of installing automatically, I am prompted for a disc, and even for things which I do have the disc (eg printer), it still does not work. Things that were used before this problem cropped up, eg another ipod, another printer, a mouse, are working fine. I have spoken to HP, Microsoft, the printer manufacturers, tech guys, everyone, and the best advice I got was to backup my data and wipe everything and start again. But seeing as I can't use an external hard drive, this could prove tedious and frustrating. I would be eternally gr8ful to any1 who could offer me anything to help me out of this bind!


A:Problem with USB slots (possible plug & play error, probably vista problem)

Have you tried the Windows Vista USB Cumulative Upate?

Read other 5 answers

Hi, ive had both of these problems for about two weeks and have tried to fix it myself. No luck at all. Dont no of their connected. Help on how to fix it would be greatly appreciated.

A:Windows 7 Not genuine Problem. And 404 error (security?) Problem.

Hello Justin, welcome to SF!

You're not giving us much to go on... please fill out System Spec's (post 4 here http://www.sevenforums.com/general-d...rum-rules.html)

And follow: http://www.sevenforums.com/crashes-d...tructions.html

Read other 1 answers

I have a game. The problem is that i can only play it for sometime. After sometime an error message appears stating game.exe has encountered a problem and needs to close. We're sorry for in inconvenience. It happens every time i open it.

Game - Mad Cars

System Requirement of the game

Processor - Pentium lll 500 MHz
Graphic Card - 32MB graphic card
Ram - 256MB Ram
OS - Windows 95/98/XP

I have it.
It's not the problem with requirements.

This is the report in Event Viewer

Event Viewer Details -

Faulting application madcars.exe, version, faulting module madcars.exe, version, fault address 0x0006f3d1.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data - Bytes

0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 6d 61 64 ure mad
0018: 63 61 72 73 2e 65 78 65 cars.exe
0020: 20 30 2e 30 2e 30 2e 30
0028: 20 69 6e 20 6d 61 64 63 in madc
0030: 61 72 73 2e 65 78 65 20 ars.exe
0038: 30 2e 30 2e 30 2e 30 20
0040: 61 74 20 6f 66 66 73 65 at offse
0048: 74 20 30 30 30 36 66 33 t 0006f3
0050: 64 31 0d 0a d1..

Data - Words
0000: 6c707041 74616369 206e6f69 6c696146
0010: 20657275 64616d20 73726163 6578652e
0020: 302e3020 302e302e 206e6920 6364616d
0030: 2e737261 20657865 2e302e30 20302e30
0040: 6f207461 65736666 30302074 33663630
0050: 0a0d3164



Read other answers

the acpi bios in this system is not fully compliant with the acpi spec.. first of all ive never done a bios upgrade but im sure that if i get the step by step i can do it like the files i need to copy on the floppy to make it bootable need the exack names of those please can anyone help/////// can any one help

A:windows xp error problem xp pro error

There should be complete srep-by-step info available on the motherboard makers site where you download the BIOS from.

It varies between systems so you need to get the info for your exact system, which should be as above.

You are right to be wary, as if the flash goes wrong your motherboard can be unuseable.

Read other 3 answers

Hi this error message has been floating around for a long time.  I have yet to find a solution that works or that I can understand.  Why is the error message not resolved after 6 years?
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\SyncUP. Error:(The system cannot find the file specified. (0x80070002))

Read other answers

We switched from Windows Mill. Edition to Windows XP. My daughter uses AIM to chat with her friends from school. After making this switch every time she starts AIM and the whole time she is on, an error box will keep popping up with the following message
"ModuleC:\ProgramFiles\AIM\deadaim.ocm is missing"
She will just hit enter and continue to chat with her friends.
Please help me get rid of this for good?????

Thanks, Lisa

A:Problem with AIM, I Keep getting an error

Uninstall AIM and reinstall with the newest version (came out 2 days ago) from www.aim.com . me and xp have a compatiblity issue with the same install of AIM. the newest version is different that what your daugher is used to, so try downloading the older version.

Read other 2 answers

This message keeps popping up, it goes away with a few clicks, but is annoying, keeps popping up intermittantly can anyone tell me how to get rid of it, thanks, I would really appreciate it. Joel


A:error problem

Is Flight Simulator X crashing?

Read other 1 answers

Every time I log on, I have a run dll error.  It says "there was a problem.....

Read other answers

this was originally posted under xp problems, until someone sent me in the right dirction
thanks techychick

pop up error cant find fix


hello, i also have this pop up showing up on another account on my comp. it shows up after logging on to the account, the desk top picture shows then turns white icons are still there but the back ground turns white and it says

cannot find file///c:/WINNT/privacy_danger/index.htm

you try right clicking and nothing happens

where do i turn?


A:help, w/ error problem..

Click here to download HJTInstall.exe

Save HJTInstall.exe to your desktop.
Doubleclick on the HJTInstall.exe icon on your desktop.
By default it will install to C:\Program Files\Trend Micro\HijackThis .
Click on Install.
It will create a HijackThis icon on the desktop.
Once installed, it will launch Hijackthis.
Click on the Do a system scan and save a logfile button. It will scan and the log should open in notepad.
Click on "Edit > Select All" then click on "Edit > Copy" to copy the entire contents of the log.
Come back here to this thread and Paste the log in your next reply.
DO NOT have Hijackthis fix anything yet. Most of what it finds will be harmless or even required.


Read other 1 answers

I installed Microsoft Visual Studio 6.0 Pro and now everytime I run AIM I get 4 runtime errors. They say :

A Runtime Error has occured
Do you wish to Debug?

Line: 1
Error: Invalid Character

Then it gives me 3 more with different lines. I uninstalled Microsoft Visual Studio 6.0 Pro from add/remove programs in the control panel and then uninstalled and reinstalled AIM. I cant get it to not give me this error message and is annoying when Im trying to run AIM. Thanks.

A:Problem With AIM Error

I did a system restore and that seemed to clear it up. It was also happening when I tried to open some websites. I hate doing system restores since I lose info but its better than having the error message. Thanks anyway.

Read other 1 answers

Hi i just try to use fingerprint device and for that first i try to install hp protect tool drivers so when i started than one error is occar and that is erro 1722 and one massage is display that is (there is a problem with this windows installer package. a program run as part of the setup did not finish as expected. contact your support personnel or package vendor. action register BIOS Domain. 6B 1B2029_AC46_454E_9437)so please tell me solution of this problem  i m waiting ..   Manoj[Personal Information Removed] 

A:Error Problem

I have found a possible fix to your problem check out this link as it has fixed the exact problem and it has worked for me. http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_158015_1

Read other 1 answers

Hello friends,

Lately my computer has been acting weird, for example when I restart my computer lately it restarts normally but there is no display being output onto my monitors and I think my computer gets pass BIOS but it does not show anything on my display.

Basically what I am trying to say is that when I restart my computer my monitors do not turn on, even if i manually turn them off and back on they still will not display anything. (I re-installed Windows 7, then ran an iso off my computer and had to turn my computer off quickly before it passed BIOS or I would have to start the installation again as I figured out the 3rd time installing Windows 7 and then running the iso for Windows 8)

So today, I try to install Windows 8.1 after updating my computer to the latest version, and it says a restart is required to finish the installation of Windows 8.1. So I turn my computer off (no restart since my computer can't restart properly) and turn it back on, but why would that work right? and nothing happens and I need to run the Windows 8.1 install inside the store again.

I restart my computer and of course my computer does not display anything on the monitors, so I hold down the power button so my computer turns off and then turn on my computer again, then I get an error code since Windows 8.1 was not installed.

Is there a way I can fix this really weird 'function' that my computer?

I would appreciate any help

A:How can I fix this error / problem?

I had the same problem and reseating my video card fixed it.

Read other 3 answers

Hello, my daughter downloaded AOL's AIM+ and she just started to use it. It all went fine but now whenever she tries to add a "Buddy" she types in the name then returns to the front of Buddy List to view names she gets this error: "One or more of the additions or modifications to your Buddy List were not able to be saved". Can anyone help us out...She verrified the new account in her email & all that stuff..
We DO NOT HAVE AOL, just AIM. This is a brand new screename that she is using, different from her other screename if that matters. Oh, its version 5.9.3702
Thanks for any help

A:AIM Error problem ??

Has this only happened today? It may just be an AIM server issue.
I've seen cases like that before. Sometimes waiting it out is all you can do.

Read other 1 answers

I have been getting different errors with every program i use, so i tried to download a registry fix file that i have found and that from what i know will work. But when trying to install that and also a couple different antivirus programs i have come across this error.


i have no idea what it is, or how to fix it. If i would be able to fix that i would most likely be able to fix the other errors on my computer.

A:A big error problem

Read other 12 answers

Today I was clearing out my harddrive, uninstalling some programmes I didn't need, when I got the BSOD.

It rebooted, and I found that my Firefox and IE browsers were both italicizing random parts of webpages, and I couldn't get it to stop. It wasn't to do with how I viewed the page.

Then, I suddenly got another BSOD. When rebooting, I saw that the startscreen was ALSO all iitalicized. Windows explorer was all glitched up, and I realised that everysingle bit of text, both on the webpages and in the BIOS that wasn't originally bolded or italicized, had become italicized.

I rebooted twice, but the problem didn't go away. Suddenly the screen flashed and I got a message telling me that Windows had recovered from a serious error.

These codes were included;

Error code 1000008e, parameter1 c0000005, parameter2 f78448f0, parameter3 ba44a9a8, parameter4 00000000. OSVer: 5_1_26000 SP: 2_0 Product: 256_1

I am using a HP Laptop running Windows XP Home Edition.

I am in the middle of scanning for malware, nothing yet.
I did a disk error check, but it couldn't complete for some reason. Got to the end of Phase 2.

I got a BSOD a couple of days ago, and that caused everything to go, not italics, but bold. But it worked again after I rebooted. This isnt.

Any help?

A:Serious GUI problem and Error.

Hi and Welcome,
First, have you tried a system restore?

Read other 3 answers

I use paint shop pro 9 and it was working fine a few days ago then all of a sudden when I go to open it it loads the splash screen then I gt an error message telling me it caused and error and has to close. I have done all my updates for my computer cleaned it out, uninstalled psp9 and reinstalled it again nothing helps. I even tried installing 10 to see if maybe there was something missing from 9 installation but that didn't work either. i have used psp seems forever and this is the first time it has done this. no matter what versionn of psp i run or install it still brings up the error. i am running windows xp

A:error problem

Try using system restore to a date before you encountered the problem. This will undo all system changes to the restore point you chose without deleting any documents ect...

1. Click Start.

2. Point to All Programs.

3.Point to Accessories.

4. Point to System Tools.

5.Click System Restore.

6.Follow the instructions on the wizard.

Read other 2 answers


i have a new acer laptop with vista preinstalled. I have defined myself as administrator and with my user-id i was able to define other users and to install programs.

However since yesterday i can not do those admin functions anymore. In control panel i still see that vista sees me as administrator but if will click on "Add or remove user accounts" nothing happens, for some seconds i saw a circle is turning meaning vista is busy, then the circle stops turning but i remain in the same screen. The same will happen if will click on "Set up parental controls for any user".

Also, i can not install new programs anymore. If i will insert a cd with software and click on setup.exe then an error window will be displayed with the message: Windows can not find E:Setup.exe. Make sure you typed the name correctly. Actually the file is there because i just click on the explorer menu.

Also, on control panel, if i click for example on "Edit the system environment variables" then i will get an error window with the error message: Windows can not find c:\Windows\system32\SystemPropertiesAdvanced.exe. Again this file is present in c:\windows\system32 so there is another error but what ?

Any feedback will be appreciated,

best regards

A:UAC problem or error ? Please help ...

do a system restore to last week, its quick and somewhat painless. afterwards i would turn off UAC if i where you, that way you don't have to tell windows you want to do admin things.. You just do.

Read other 2 answers

I have a new PC, just noticed that everytime I try to open a PDF doc on-line I get a internet explorer has stopped working. I can open them in safe mode but not in normal mode. I called a help desk, they were no help. Any suggestions??

My AV software is Kasperski, BTW.

Problem signature:
Problem Event Name: BEX
Application Name: iexplore.exe
Application Version: 9.0.8112.16421
Application Timestamp: 4d76255d
Fault Module Name: StackHash_0a9e
Fault Module Version:
Fault Module Timestamp: 00000000
Exception Offset: 00000000
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

A:How to fix a BEX Problem Sig error?

Quote: Originally Posted by titan7

Problem signature:
Problem Event Name: BEX
Application Name: iexplore.exe
Application Version: 9.0.8112.16421
Exception Code: c0000005

A BEX event is security related, e.g., Buffer Overrun, DEP

0xc0000005 = memory access violation

Reset IE - How to reset Internet Explorer settings

Install latest Adobe reader - PDF reader, protected mode | Adobe Reader X

KIS may be causing trouble here. Boot into SAFEMODE w/ Networking - see if same error occurs when opening a PDF.

Regards. . .


Read other 9 answers

Can anyone please advise of what a “Runtime Error ‘-2147023838 (80070422)’. Means. Every time I start my computer this window opens. I have checked my device manager and there are no conflicts, nor does my scan disk find anything. Everything seems to be working fine however, I just purchased the Sony laptop and I am not sure if everything is working fine, since I am not use to everything yet.

Please help if you can. I have reformatted the computer for various reason five times in the last week and I am really tired of the three to four hours I must sit through to reinstall everything. I am hoping to avoid doing it again for at least a week or two.

Thanks in advance


A:Please help with Error problem

Look into the event manager and see what it says there.

Read other 3 answers

Can anybody explain this error message for me please ?..

Access violation address 71F2428E in module ""winmm.dll"" read of address 035DFFD4

How to fix this error ? thanks everybody ..

A:dll error problem

winmm.dll is a module for the Windows Multimedia API, which contains low-level audio and joystick functions.

Not much information on these:
Access violation address 71F2428E
read of address 035DFFD4

What are you doing when you get this message?

Read other 2 answers

Modem can be recognised in device manager but in dial up connection it says "modem uninstalled". This is a development from error 633. Please help me resolve this problem

A:Error 633 problem

we need your system specs and the modem make-model

Highly likely that you need the OEM drivers to be reinstalled.

Read other 2 answers

I am STILL getting C++ visual runtime library error-abnormal program termination anytime I try to play a game. I have updated all drivers, Directx9.0b, used driver cleaner and re-installed, have all microsoft updates, upgraded virtual machine, tried different settings in bios, all game patches, forced irq sharing, updated chipset drivers, no over-heating...etc. I'm going nuts!!! I am beginning to think it may be the motherboard and the graphics not playing well together. I am running; WINXP-Gigabyte GA-7vtxe-GeForce4 mx 440 w/8xAGP-AMD Athlon 1.3g cpu-256 ddr-80 gig seagate HD. Any suggestions that I have yet to try? I am thinking of getting the Asus a7n8x-e to see if that will fix this.

A:Same C++ error problem

It is indeed a weird error, but I think its your operating system. (A corrupt .dll file or something) I'd wager a reformat will clear things up.

That error simply screams "software issue!", so I don't think it has much to do with your parts not co-operating.

I'd also wager buying a new motherboard for this problem is a waste of $100-150!

Save yourself from wasting any more time on that error, and definitely don't spend money on it. Back up your important data and start fresh.

Read other 1 answers

I have this problem for couple of days ...
after a few hours the computer gives me this error(attached file) and then go blank (i meen no icons or even taskbar shown) all i have to do from here is to log off by Ctrl+Alt+shift menu or restart my computer..

how can i fix it ? thank u very much //

A:Xp Error Problem

What programs if any are you running while this happens? Is it idle?

Read other 3 answers

I have bought a secondhand PC:

Intel Pentium 4 2.80 ghz

windows = xp sp2

i have two drives

WDC-WD800JD sata 80gb (new)
quantum fireball 20gb (old)

my previos pc was a Pentium 3 548 mhz with xp sp2
it was working perfectly and it had the quantum fireball disk

now on this pentuim 4, i am experiencing problems in running my executables , not all of them, but random ones. Some are specifically not running:
Adobe reader 9
norton av 2010 setup
all NSIS installers
flash player setup
and others...
These were working corectly on pentium 3 but i get an eror or no response from the exe when trying to run exe on p4

I have installed all drivers and still no response
tried ntfs and fat32, NO
installed XP 5 times, Vista 1 times and Win7 1 time, but still NO

i downloaded the afroesaid exes from internet, they ran successfuly but after a restart of the system, the same behaviour as before

these programs always run
VLC player
yahoo messenger

Please can someone tell me where is the root of the problem and its solution ?

note : i have no budget to buy a new pc

Read other answers

I have windows xp home edition.

I have installed a maxtor min4 portable hard drive for back up.
There is a safety drill feature which makes a backup copy of my hard drive. When I utilize the safety drill I get the following error:

[20080310 10:37:10] Started
[20080310 10:37:10] Configuration file is corrupted
[20080310 10:37:10] Exiting due to errors
[20080310 10:37:19] Exiting progress thread
[20080310 10:39:04] Started
[20080310 10:39:04] Configuration file is corrupted
[20080310 10:39:04] Exiting due to errors
[20080310 10:39:13] Exiting progress thread

I've tried the error checking option for the C drive which checks the volume for errors and that check found no errors. Any other options to fix this?

A:error problem

If the min 4 installation and utilities files are lost or corrupted, you can download new copies from the Seagate Website at www.seagate.com. On the website, click the
Download Center link for all available downloads for your min 4.

Read other 2 answers

Tonight I installed a system clean up program and it seems to have messed up my system somewhat.

Everytime i boot up i get this message.

Does anyone know how to fix it.

The program doesnt make a backup before it deleates.


A:Problem with Key Error

Well I Googled around a bit with your error message and found very little hits for "realtime" or "35002". I wonder if this is a Microsoft error or not.

Also I think it would be good for you to post exactly which software you think created this error. That might help someone to help you.

Your assumption that this is a Registry Error may or may not be correct. I would not "jump" on anything at this point.

If it is a Registry Problem, you might try the Registry Fixer from Macecraft. But that software only seems to find "orphaned" Registry entries. I wonder if anything can fix a registry that is truly messed-up, other than a Repair (Re-)Installation of WinXP.

Read other 6 answers

Yesturday I tried to install SP1 & recieved this error: "WindowsUpdate_80073712" "WindowsUpdate_dt000"

After finding out it was most likely due to registry problems, I tried WiseFixer, which a few sites recommended as a free DL & install cleaner & although it found several errors, to use its 'cleanup' function I have to pay $50.00 ... no thank you. So I cleaned the registry using Auslogics Registry Cleaner & then CCleaner's registry tool & shut down the comfuser.

This morning I booted the comfuser & as a precaution, ran Auslogics Registry Cleaner & then CCleaner's registry tool once again, no errors found by either program. So I procceded to install SP1 again, again I recieved the same error. Any recommendations on what to try next?

Also, is WiseFixer a better registry cleaner? It found hundreds more errors than Auslogics Registry Cleaner & CCleaner's registry tool did.

A:SP1 error problem

Problem with my Windows Seven x64 and KB2284742 + KB2388210, got - Microsoft Answers

Read other 5 answers

I have a dell laptop and whne I booted up yesterday I had a error loading c:\windows\system32\wqnomolw.dll message come up.I do not know what this means.also I use NOD32 and it picked up a virus but I was able to deleat it.Hope someone can help,thanks.

A:Error problem

Does the laptop still boot normally?

Read other 3 answers


My system crashed after i plugged an iPod into a USB port. After restarting, I noticed that I can't access the add/remove program applet. An error message stating that "Invalid Value type for property in conditional: 'Enabled' at line 42" appears, and the program closes. Think it has something to do with rundll.exe. Any assistance will be greatly appreciated. Thanks.

A:Run Dll as an app problem/error

Read other 6 answers

Can you help please,
I have just recently had the error warning appear on the desktop every time I boot up saying
Error in WSClient.dll
Missing entry: Refresh banned apps list.
Can you tell me what this means, what I have done to cause this and how do I get rid of it please

Many thanks

A:Error, Dll problem

What build of Windows 10 are you running? You can run Winver and it will tell you.

This is a known bug in all insider builds after 10586. You can disable the task as described here Heres a fix for the WSClient.dll error popup in Windows 10 build 11099

Read other 1 answers

i just wanted to know how to fix a wj view error could not execute main

A:error problem

Read other 12 answers

There is one website I can't access because it is showing Error 500 - how do I clear it - I'm on Windows 7 Have tried contacting the website , but they couldn't help.

Read other answers

Hi, I have an error box coming up when I turn my computer on it says Error loading crogram files\Wild Tagent\apps\CDA\cda engine 0400.dll The specifcied module could not be found...Thanks Kitcat

A:Error problem

http://www.kephyr.com/spywarescanner/library/wildtangent/index.phtml Go here . There is a removal tool . You may need it to play some games Just read the page and decide for yourself what course to take .

Read other 1 answers

HI could some one help!!!!!! every 10 mins or so i get the message the instruction at "0x00a13cca" referenced memory at "0x00bf458c" the memory could not be "read" then stright after that i get the message runtime error 216 at 00a13cca so how do i get rid of it thx plz reply

A:error problem

This issue can occur if your computer is infected with a SubSeven Trojan virus.Update your virus scanner, and run it.Also run these online virus scanners:http://www.pandasoftware.com/activescan/http://housecall.trendmicro.com/

Read other 1 answers

I have a problem with one of my HD as you will see the windows error in the image.

Did a chkdsk command nothing found.

The problem only happend when i tried to copy 190GB over to it.

My Tower only has two bays for HD but I added a 3rd.

Any ideas on this problem?

A:HDD problem error

It looks like your hard drive may be going bad. How old is it?

I suggest you run a hard drive diagnostic to test the drive. It looks like you have a Western Digital Blue 320GB so you can use the Data Lifeguard Diagnostic for Windows Tool. There's also a DOS version as well on that page that may be more extensive.

I'd also suggest backing up the data on that hard drive asap in case it is failing.

Run that test and let us know the results.

Read other 7 answers

dear friends i use the sumproduct formula in 2 cells but in one cell it giving the "#value" error i dont identify why it is giving but the second cell's result is ok
i attached the sample book for solving the problem please help me soon

A:Value error problem

fahad, you have a text value in cell L15. Remove this and your formula should work.


Read other 1 answers

I've been recieving "Windows cannot find (exe. files). Make sure you typed the name correctly...."
I've tried www.dougknox.com and his exe. file association fix and nothing worked.
Please help me and thx in advance.

Logfile of HijackThis v1.96.0
Scan saved at 8:04:22 PM, on 8/18/2003
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2600.0000)

Running processes:
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashserv.exe
C:\Program Files\Windows Media Player\setup_wm.exe
C:\Program Files\AIM95\aim.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\PopupAdZero\PopupZeroTray.exe
C:\Documents and Settings\Anonymous\Desktop\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://www.websearch.com/ie.aspx
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://www.smarter.com/index.php?sidebar=1
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.yahoo.com/
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://start.earthlink.net
R1 - HKCU\Software\... Read more

Read other answers

i have been getting error message's

1. This application has failed to start because Riched20.dll was not found

2. error 2894.info2894.loding Riched20.dll failed. get last error( ) returned: 126

i run XP Home Edition

A:A error problem

Read other 14 answers