Over 1 million tech questions and answers.

Linked Server from SQL Server 2008 to Access 2000 db gives error

Q: Linked Server from SQL Server 2008 to Access 2000 db gives error

I have a Access 2000 database residing on one sever and an installation of SQL Server 2008 residing on another. Both servers are running Windows Server 2003. I created a linked server using the code below. When I run EXEC sp_tables_ex 'PropCont' I get the following,
"OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: The provider did not give any information about the error.].
Msg 7399, Level 16, State 1, Procedure sp_tables_ex, Line 13
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. The provider did not give any information about the error."

I tried changing the code to specify my account information, which has Administrative privileges on the domain and I get,
"OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80040e4d: Authentication failed.].
Msg 7399, Level 16, State 1, Procedure sp_tables_ex, Line 13
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. Authentication failed."

Originally I was getting an error that said, "The workgroup information file is missing or opened exclusively by another user" I found an article on line that suggested I do the following,
"1. Open SSMS
2. Expand Server Objects, Linked Servers, Providers
3. Double click the provider (Microsoft.Jet.OLEDB.4.0)
4. UNTICK the "Allow inprocess" option"
I did this and I stopped getting that error but started getting the error I listed above however when I went back and checked the "Allow inprocess" option was still checked. I can't get it to remain unchecked. I can't find anything regarding how to specify the MDW file which is located in the same folder as the database file.

Another article suggested making sure it is checked and also checking "Nested Queries". This had no effect.

I believe the linked server has been created correctly as I can see it and it's properties in SSMS and it shows up in the list of linked servers when I run, EXEC sp_helplinkedsrvlogin

The Access database has been in use for years. Users access it through the Access runtime.

Any suggestions would be greatly appreciated.

EXEC sp_addlinkedserver
@server = 'PropCont',
@provider = 'Microsoft.Jet.OLEDB.4.0',
@srvproduct = 'Access',
@datasrc = '\<Server Name>SharedDatabasesPropCont.mdb'
GO

EXEC sp_addlinkedsrvlogin
@rmtsrvname = 'PropCont',
@useself = 'false',
@rmtuser = 'Admin',
@rmtpassword = ''
GO

RELEVANCY SCORE 200
Preferred Solution: Linked Server from SQL Server 2008 to Access 2000 db gives error

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Linked Server from SQL Server 2008 to Access 2000 db gives error

Read other 7 answers
RELEVANCY SCORE 102.8

I have 2 servers; windows 2000 & windows 2008, I can always access them via XP but my system 7 home can't authenticate. It appears to add the domain name as a preamble my user name in the authentication....does this make sense?


thank
-Jeff

Read other answers
RELEVANCY SCORE 98.8

We have a requirement to get the windows services from one of our remote server. We already have a group with admin rights on that machine and users added to it. But while fetching the services from that details we get below error.
We are using C#.net to fetch the services.
Error:
InvalidOperationException Was caught
Cannot open Service Control Manager on computer :"". This operation might require other privileges.

Read other answers
RELEVANCY SCORE 89.6

I have a new server running MS Win 2000 with 4 desktops running MS Win XP. The problem I have is when logged into the network users do not have any permissions to do anything! Can't write to the HDD, change date & time, create and save files!

I have given them every permission on the server I can think of, still no go. I also cannot make their logon ID's administrators (or power users) on their desktop. I have turned off the firewall on the desktops (router has a firewall).

I am at a loss on what to do next. This is critical for running the office!
Any help appreciated.
 

Read other answers
RELEVANCY SCORE 88.8

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 88.4

Will someone please explain to me briefly what the difference is between all of these? Why would one want one over the other?

I guess that Windows 2000 is sort of like NT Workstation. If not, please tell me.

And what is the difference between Windows 2000 Server and 2000 Advanced Server?
 

A:{Advice Offered} - Windows 2000 Professional, 2000 Server, 2000 Anvanced Server--the difference?

Greetings

Win2K Professional is, indeed, just NT Workstation 5.0

The real difference between Win2K Server and Win2K Advanced Server is scalability. To quote a CNET article: "Three versions of the operating system will be available next week (it's an old article): Windows 2000 Professional, aimed at PCs and workstations; Windows 2000 Server, for file-and-print servers; and Windows 2000 Advanced Server, supporting clustering, which is a way of making several systems act as a single, more powerful computer.

To quote the FAQ from www.winmag.com:
Windows 2000 Professional is the workstation edition of Windows 2000. This is basically Windows NT Workstation 5.0, although Win2K Professional of course includes all of the new technologies for Win2K.

Windows 2000 Server/Advanced Server is the server edition of Windows 2000, which is designed to serve small- to mid-sized businesses and workgroups. Server supports up to 4GB of physical RAM and up to 4 processors per computer. Advanced Server supports up to 8GB of RAM and 8 processors per computer.

Windows 2000 Datacenter Server is designed for large businesses and computer clusters. Datacenter supports up to 32 processors per computer and up to 64GB of RAM, as well as built-in clustering and load-balancing features.

Is that what you wanted?

Cheers

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Website: www.xperts.co.za/reuel/multiboot

Every morning i... Read more

Read other 1 answers
RELEVANCY SCORE 87.2

I am trying to create a link in access 2007 to a passworded mailbox on the exchange server.

I was using the linked table wizard on my inbox, but that specifies the link location as a file on my computer, and this needs to work across a network of users.

I found this link which seems to be exactly what I need, but is in reference to Office 2000:
http://msdn.microsoft.com/en-us/library/aa164914.aspx

I don't really understand whats going on with it and so don't know if it doesn't work because it is in reference to office 2000 or because of some other problems.

Here is the code I'm using, which should specify subfolder "New Folder" in the inbox

Public Function link()
CreateLinkedExternalTable "F:\Email Database\database.accdb", "Exchange 4.0;MAPILEVEL=Mailbox - Company name|Inbox;TABLETYPE=0;" & "DATABASE=F:\Email Database\database.accdb;", "New Folder", "LinkedExchange"
End Function
______________________________________________________________

Sub CreateLinkedExternalTable(strTargetDB As String, _
strProviderString As String, _
strSourceTbl As String, _
strLinkTblName As String)

Dim catDB As ADOX.Catalog
Dim tblLink As ADOX.Table

Set catDB = New ADOX.Catalog
' Open a Catalog on the database in which to create the link.
catDB.ActiveConnection = "Provider=Microsoft.Jet.OLEDB.4.0;" & _
"Data Source=" & strTargetDB

Set tblLink = New ADOX.Table
With tblLink
&... Read more

A:Solved: Access linked table to Outlook mailbox on exchange server

Read other 8 answers
RELEVANCY SCORE 84.4

Hello,

I have a problem to access file server on Windows Server 2000 from a Windows 7 PC. For your information, due to some reasons, both Windows 7 and Windows Server 2000 are in different domain.

I have tried all suggested solutions which are :
i. to unchecked both attributes in 'Network Security : Minimum session security for NTLM SSP based (including secure RPC)' for both clients and server.
ii. to apply 'Send LM & NTLM - use NTLMv2 session security if negotiated' in 'Network Security : LAN Manager authentication level'
iii. to make sure the time setting for both Windows 7 and Windows Server 2000 are the same.

But still, i couldn't access the file server. In fact, each time I entered domain\username to authenticate, it will give out this message :



Since I am kinda new to this troubleshooting things, it would be great if someone can tell me why does this happening. Is it because of the different domain?

thanks in advance.

A:Windows 7 unable to Access file server on Windows Server 2000

To connect to the server you would need to enter the credentials of the domain user on the server that would have access. For example if the domain was 'home' with a user 'Josh' then I would put:

home\Josh

As the username. If you want to get advanced you could try and form a trust with the other domain in active directory so that the other domain has permission to access the server

Josh

Read other 4 answers
RELEVANCY SCORE 83.6

Hi, I am going to install windows 2008 server on the IBM server x3650 7979 and couldn't get the supportive RAID Serv as the I am currently got the IBM ServerGuide Setup and Installation CD version 7.4.17 for adaptec RAID controller 8K but it does not have windows 2008 server option. Do assist me in this regard. thanks
 

Read other answers
RELEVANCY SCORE 82.8

As my final project for the year i am setting up a server that we will eventually move all our computers on to. I am using a poweredge 2900 as a server with windows server 2008 installed. As of now i have 2 computers connected to the domain which they can log on to.

- what i need help with
- How do i give all users access to programs?
- Each student needs to have access to her own drive through the server not locally.
The client computers are connected to a switch using dhcp.
Any help would be greatly appreciated.

A:setting up a server for school help (windows server 2008)

I'm quite sure your instructor/teacher did not intend for anybody but you to do the final project for the year and nobody else.

Read other 9 answers
RELEVANCY SCORE 82.8

Hi guys,
 
What free Antivirus software for servers?
What free anti-malware would NOT be a good idea?
 
Info:
My friend has purchased a Poweredge server to act as a fileserver for a private network not connected to the internet..  He uses 2 laptops at the most  to access files on the server.
 
However at some points he will update Windows Server 2008 plus odd bits by temporaily hooking up to the Internet., and obviously leave himself open to malware etc. for a short time.
 
The cost of server Antivirus is very high and usually effective for 10 workstations upwards, and obviously he would appreciate keeping costs down.
 
 
Questions:
I would appreciate thoughts on ideas for avoiding a costly solution.
 
Also, if he got Malware on it (e.g. Rootkit or Delta) would current Bleeping Computer tools (e.g. Rkill, RogueKiller etc) still work on the server - or does it require another approach? 
 
I am asking fior advice BEFORE he gets started while options are open.
 
 
Thanks in advance guys
 
 
 
 
 

A:Free Server Antivirus ? e.g. for Windows Server 2008

The answer is fairly simple. Just read the details on the site -
Microsoft Security Essentials is available for small businesses with up to 10 PCs.
 
• Microsoft Security Essentials:
Microsoft updated it’s free Anti-Virus solution at the end of 2010 to support Windows 2008/R2.
This is easily one of the better free offerings as Microsoft has updated this solution to complete directly with some of the biggest solutions, such as Mcafee and Symantec paid versions.

When downloading, simply choose Windows Vista / Windows 7, as Microsoft has yet to update the website.http://www.microsoft.com/security_essentials/
 
Regards -

Read other 6 answers
RELEVANCY SCORE 82.8

We had:

1) 1 Windows Server 2003 running Active Directory services to manage logon and permissions for file sharing.
2) 15 workstations.

We now want to have:

1) 1 Windows Server 2008 R2 server running Active Directory services to manage logon and permissions for file sharing.
2) 15 same workstations, with their same user profiles.

So I joined the 2008 R2 server to the domain, and then used the dcpromo tool to make it a domain controller.

Problem is, whenever I take the old server offline, (the 2003 one) everything flips out, logons are slow, and the 2008 server gives people trying to access shared files weird errors like that the server that authenticated them cannot be contacted, and asks them to log in again with their username and password before accessing shared files on the server.

What did I do wrong? I must be forgetting something.
 

A:Replacing a Windows 2003 AD DS server with a 2008 R2 AD DS server

1. Transfer all FSMO roles to your 2008 R2 server
2. Uninstall AD on 2003 server
3. You can now permanently take 2003 server offline
 

Read other 13 answers
RELEVANCY SCORE 82.4

Hello,

I have installed SQL Server Express 2008 on my desktop and am attempting to connect to it from my lap top. I have enabled remote connections for SQL Server and opened up a port on my desktop. When I attempt to connect to the server instance from my laptop via ipaddress\sqlserver with the Windows 7 firewall turned on and the port open, the attempt fails. However, if I turn off the firewall and attempt to connect via my laptop the connection is successfull.

I followed the steps to open up the port:To enable port 1433 on Windows 7
On the Start menu, click Control Panel.
Click System and Security.
Click Windows Firewall.
Click Advanced Settings.
In the Windows Firewall with Advanced Security on Local Computer dialog, click Inbound Rules.
In the Actions panel, click New Rule?.
In the New Inbound Rule Wizard, click Port, and then click Next.
In the Specific local ports: box type 1433. Ensure that the (default) TCP radio button is selected and then click Next.
Ensure that the (default) Allow the Connection radio button is selected and then click Next.
Clear or select the Domain, Private, and Public checkboxes as appropriate, and then click Next.
In the Name box, type an appropriate name, such as SQL Server Port, and then click Finish.

Can anyone offer up any suggestion on why I can connect with the firewall turned off, but not when it is on?

Any suggestions are greatly appreciated!
Win7Newb

A:Remote Access to SQL Server Express 2008 Windows 7

  
Quote: Originally Posted by win7newb


Hello,

I have installed SQL Server Express 2008 on my desktop and am attempting to connect to it from my lap top. I have enabled remote connections for SQL Server and opened up a port on my desktop. When I attempt to connect to the server instance from my laptop via ipaddress\sqlserver with the Windows 7 firewall turned on and the port open, the attempt fails. However, if I turn off the firewall and attempt to connect via my laptop the connection is successfull.

I followed the steps to open up the port:To enable port 1433 on Windows 7On the Start menu, click Control Panel.
Click System and Security.
Click Windows Firewall.
Click Advanced Settings.
In the Windows Firewall with Advanced Security on Local Computer dialog, click Inbound Rules.
In the Actions panel, click New Rule….
In the New Inbound Rule Wizard, click Port, and then click Next.
In the Specific local ports: box type 1433. Ensure that the (default) TCP radio button is selected and then click Next.
Ensure that the (default) Allow the Connection radio button is selected and then click Next.
Clear or select the Domain, Private, and Public checkboxes as appropriate, and then click Next.
In the Name box, type an appropriate name, such as SQL Server Port, and then click Finish.

Can anyone offer up any suggestion on why I can connect with the firewall turned off, but not when it is on?

Any suggestions are greatly appreciated!
Win7N... Read more

Read other 6 answers
RELEVANCY SCORE 81.6

We are trying to come up with a solution which will enable users to access exchange without having to give them full access to the internet. We have finally gotten a list of IP's from Microsoft that we need to allow connection to, but we cannot seem to find a way that we can enable this. I saw a way to use this using IE, but most of our computers are running wither Firefox or Chrome. If we cannot figure this out we will be looking at hardware solutions, but we would prefer to see if we could do this via group policy or something else first.

Thanks!

Clients are running win 2000, xp and 7 - Office 2010

DC's are running 2008 R2
 

Read other answers
RELEVANCY SCORE 81.2

Hope this is the right place to post this


Just set up server 2008 r2 on a older box I had that I was using for a few things. Tried Linux but became tThanks of a pain for such simple tasks. Here is what I'm using it for.

Csgo server
Mumble server
File/backup
Media server?

My main concern was for media server to stream to few devices in the house. I was thinking plex. Does anyone have any other ways I can go about it.

Thankd

A:Server 2008 for home server... Opinions please.

Not sure what opinions you want. All I can say is that you don't need server 2008 R2 to complete your desired tasks. Any basic Windows client OS should work.

EDIT: It should be noted that Windows Server OS's are enterprise standards therefore a lot of home license applications will not install unless it is open source. You will need to purchase enterprise licenses of software for them to be installed on the server. This is particularly important with Anti-Virus solutions.

Josh

Read other 5 answers
RELEVANCY SCORE 81.2

Hi all
Have been a LONG LONG user of Linux as a server (hosting VM's XP / W7 mix) and file / print sharing.

I used to avoid MS like the plague as far as SERVER environments are concerned - probably because my first experince was Windows NT (Windows NeanderThal or Windows No Thanks) which was SO HORRIBLE that it put me off Windows servers for ages.

(Note I'm using a server in a HOME environment where we have around 8 machines (most of which are actually mine for testing -- not a corporate environment which has other considerations).

The problem now with the latest Linux distros that they are trying to be "A Better Windows than Windows". You can of course customize them but I haven't got the time or patience to do this any more. To select what packages to install / leave out now is a 100% pain and if you do it wrong the chances are the system will give errors.

I've looked at the new SUSE 11.2 -- slick and polished - bit I don't NEED "an alternative Windows".

I've just been looking at Windows Server 2008 R2 (got it from Technet) and I'm REALLY IMPRESSED with it so far. I've installed the STANDARD version - you don't need datacenter or Enterprise version for a home server.

It runs vmware server on it just fine (although I might go the whole hog and use the Hyper-V virtualisation -- need to do a bit more research).

I'm quite happy letting MS do the updates than having to mess around with Kernel compiles etc.

Incidentally as a HOME server there ... Read more

A:Windows 2008 Server or Linux for server

Windows servers have come a very long way in the last few years, I will never use a linux server ever again.

Read other 9 answers
RELEVANCY SCORE 81.2

I'm trying to decide between Windows Home Server and Windows Server 2008 R2 for my home server PC. Ordinarily it would be a clear cut choice, but I've got a free copy of Server 2008 R2 through my academic MSDN subscription. I'd like to avoid spending extra money if Server 2008 R2 would do the job. But I'm willing to buy Home Server should it prove necesary. Any input is appreciated. Thanks.

A:Windows home server vs Server 2008 R2

Server 2008 R2 is a more fully functional product. You will be able to do similar things, but it might be a little more involved getting it set up and working. Plus, if you are interested in IT, you could use the Server 2008 R2 experience....but you won't get hired for your knowledge on Windows Home Server.

My vote is Server 2008 R2 without a doubt.

Read other 9 answers
RELEVANCY SCORE 81.2

i have been using application(Visual Basic 6) in my office which uses SQL Server 7.0,now i wants to install windows 7 in my pc,i would like to know whether sql server 7.0 database can be restored in sql server 2008.pls guide me how to do the same

Read other answers
RELEVANCY SCORE 81.2

Hi All,

I was wondering if someone could help me with an issue that I've been struggling with for some time.
The core issue\symptom is being unable to open roles or features in server manager (This is a VPS So cannot boot from CD to repair):



CO_E_SERVER_EXEC_FAILURE 0x80080005

If I try to start the trusted installer I get this error:



I've been trying to follow two guides: Windows Modules Installer Error 126 - Fix
and System Update Readiness Tool - CheckSur.log File Analyzis

I've checked that the registry path is correct (HKLM\Software\Microsoft\Windows\CurrentVersion\Component Based Servicing\Version):



Which matches the Trusted Installer ID (C:\Windows\WinSxS directory\
)

(Not sure why theres two folders...?)


Something odd I noticed, the missing components listed in the CheckSUR.txt file have no version numbers, just 0.0.0.0 : ...31bf3856ad364e35_0.0.0.0_none...


CheckSUR.txt:
----------------------------

Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 22.0
2014-01-06 15:39

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist
(f) CBS Watchlist Component Missing 0x80070002 amd64_microsoft-windows-browserservice-netapi_31bf3856ad364e35_0.0.0.0_none_ad85f50a98427e27 Package_6_for_KB2705219~31bf3856ad364e35~amd64~~6.1.1.1 Package registry presence failed, possibly an orphaned package on package watchlist
... Read more

A:CO_E_SERVER_EXEC_FAILURE (Server Manager) Server 2008 R2 Std

The Watchlist components are the things that tie together the Package files with the content - the registry entries are present, but the files aren't.
This creates a problem - as you've found out!
Please upload the full CheckSUR.Persist.log file, and I'll see what I can do about creating a fix - it may take a while!

Read other 9 answers
RELEVANCY SCORE 80.8

Hey,

All of our computers at work have Windows 7 Ultimate x64 and are connected through Server 2008. One computer, which I recently imaged and deployed, is having an issue connecting to network folders. The strange thing is that all networked drives are set for access through group policy. The computer in question is able to access allowed folders but, when I go to the main computer screen, instead of seeing Network on the left hand sidebar, I see Computers and Devices. Also, the machine will not allow anyone, even administrators, to map a network drive. The user also cannot access files from links in emails - i.e. drive:\folder\file. I'm wondering if there is some glitch in the policy or should I just re-image the machine. My boss wants to avoid the re-imaging but, even going through Network Troubleshooting, we can't seem to locate the problem.

A:Network access issues on Server 2008 with Windows 7 and group policy

Maybe there's something within the registry that's keeping the user from accessing?

Read other 1 answers
RELEVANCY SCORE 80.4

Hello all,
I have been trying to connect to an instance of Microsoft SQL Server 2008 R2 for a bit now, and no matter what I do, I always get the following error:

TITLE: Connect to Server

------------------------------



Cannot connect to Katherine-serv\mssqlserver.



------------------------------

ADDITIONAL INFORMATION:



A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid) (Microsoft SQL Server, Error: 87)



For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=87&LinkId=20476



------------------------------

BUTTONS:



OK

------------------------------


It sounds as if the connection string might not be correct, but the thing is, how to determine which part of it is incorrect, for if my user ID or password were wrong, wouldn't it have told me that? All network protocols are enabled except for VIA, which doesn't need to be, and the instance name is definitely katherine-serv\mssqlserver. What else am I missing? Thanks.

Read other answers
RELEVANCY SCORE 80.4

I have created an "sa" login w/ a "weak" password, but disabled strict psw enforcement. When I try to open SSMSE w/ that login/psw I get err: Login failed for user 'sa'. Reason: the account is disabled. Err: 18470
Will pay for SQL configuration advise to knowledgeable person. Thx. Chuck121
 

Read other answers
RELEVANCY SCORE 80.4

Computer: Windows XP SP3

Trying to re-install MS sql server 2008 standalone on machine, but is receiving the following error:
this was the details.

Quote:




SQL Server Setup has encountered the following error: Input string was not in a correct format




I have added the logfiles.cab and watson.mft, just in case.


Tried the work around located here
http://support.microsoft.com/kb/919236
that did not help. I then went into tools. Ran the system configuration checker. The error that came up as the Performance counter registry hive consistency.

Which led me to this article. How to manually rebuild Performance Counter Library values
I rebuilt the base performance counters but was not sure about the rest of it like re-add the extensible counters. If i am missing anything that would help please let me know. Would really like to fix this and not have to re-image the whole O/S.

A:SQL 2008 server standalone error

All Google searches point to the same solution that you found at Error message when you start SQL Server 2005 Management Studio: "Input string was not in a correct format"and then setting the value to "a" and then back to a blank entry again fixed it.

Read other 2 answers
RELEVANCY SCORE 79.6

Hello ,
Im trying to setup a VPN connection and got error 919 , and 629..
I have windows server 2008 R2 configured as VPN server and the client is on Win 7 Ult PC.
- The server is connected to the internet via Wireless LAN only.. I have a netgear wireless modem/router...
- I enabled RRAS on the server and created a user and on the AD I Allow Access in the dial in Tab.
- I created a new VPN connection on the client PC (WIN 7 ) and in the address I put the IP of the server and then the user name and password .then when I connect I got the error 919 and tried again with error 629.
- I can ping the server and the server can ping the client. Im trying on internal network.
- I enabled the REQUEST TO PING ON WAN in the netgear
- The firewall is OFF on both server and client , but still cant connect.....!!
Thanks in Advace for help and if any specific info needed please let me know.
Regards

A:VPN ERROR 919 and 629 . WINDOWS SERVER 2008 R2 & WIN 7 CLIENT

Please see the following blog.
Troubleshooting Vista VPN problems - Routing and Remote Access Blog - Site Home - TechNet Blogs 
For error 919, the suggestion is:
Configure your server to allow clients to connect with MS-CHAPv2 as the authentication method. Update your VPN client connection settings to use MSCHAPv2 as the authentication method.
If you have a third-party VPN server which does not support MS-CHAPv2 as an authentication method and supports only MS-CHAPv1, you will need to use either CHAP or PAP to connect from the Windows Vista VPN client until the server you use starts supporting
MS-CHAPv2.Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

Read other 3 answers
RELEVANCY SCORE 79.6

Server Restarts frequently
Bsod error analysis as follows

CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa8005ad5b30, Terminating object
Arg3: fffffa8005ad5e10, Process image file name
Arg4: fffff800033d5350, Explanatory message (ascii)

Debugging Details:
------------------

Page 186804 not present in the dump file. Type ".hh dbgerr004" for details

PROCESS_OBJECT: fffffa8005ad5b30

IMAGE_NAME: csrss.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 0

MODULE_NAME: csrss

FAULTING_MODULE: 0000000000000000

PROCESS_NAME: csrss.exe

EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.

BUGCHECK_STR: 0xF4_IOERR

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

CURRENT_IRQL: 0

STACK_TEXT:
fffff880`03bc90e8 fffff800`0345cd22 : 00000000`000000f4 00000000`00000003 fffffa80`05ad5b30 fffffa80`05ad5e10 : nt!KeBugCheckEx
fffff880`03bc90f0 fffff800`0340908b : ffffffff`ffffffff fffffa80`05b67b50 fffffa80`05ad5b30 fffffa80`05ad5b30 : nt!PspCatchCriticalBreak+0x92
fffff880`03bc9130 fffff800`03389144 : ffffffff`ffffffff 00000000`00000001 fffffa80`05ad5b30 00000000`00000008 : nt! ?? ::NNGAKEGL::`... Read more

A:BSOD Error on windows server 2008 R2

Hi,

Please refer to the following and reply accordingly with the required information - http://www.techsupportforum.com/foru...ta-452654.html

Regards,

Patrick

Read other 3 answers
RELEVANCY SCORE 79.6

Hello Guys,
Please I need an urgent help with the following error msg 0x0000001E that the system is getting every time the windows boot up and its running for about 5min.
The server is a Dell PE T420 with 2 xeon cpus, 32GB of ram, redundant power units, and perc h700 RAID controller.
No new updates was been installed recently and there is no HW malfunction.(I tested the RAID controller and the virtual disks, the system memory, cpu and everything else I can think of it.)
I try to run sfc /scannow, scan disk and reverting to last know good configuration on the machine, none of this with any effect.
I am attaching the minidump files I extract from the system.
Since I am suspecting that there can be a problem with some of the system drivers I also run drivers verify.
Thats said when try to open any of the dump files on a different machines I could not load them correctly as is missing symbols.
Any help will be greatly appreciated.
Best regards

A:Windows Server 2008 R2 x64 - Error 0x0000001E

Allot of important info is missing from your zip, please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a new report here.

Read other 1 answers
RELEVANCY SCORE 79.6

After 5 days of trying to make a domain using Windows Server 2008 and getting a DNS error I cracked it and my other laptop could join my domain.

But what goes around comes around.

I made an account in Active Directory Users and Computers and made it a standard user but in the log on screen I entered the credentials I get an error.

"You cannot log on using this method please contact you local administrator" or something like that.

Can you help me with this error?

A:New Domain Error - Windows Server 2008

  
Quote: Originally Posted by Pie015


After 5 days of trying to make a domain using Windows Server 2008 and getting a DNS error I cracked it and my other laptop could join my domain.

But what goes around comes around.

I made an account in Active Directory Users and Computers and made it a standard user but in the log on screen I entered the credentials I get an error.

"You cannot log on using this method please contact you local administrator" or something like that.

Can you help me with this error?


Welcome Pie015 to the windows 7 forums.

Have you set up the ad permissions for "users" to be able to log onto the server from remote?

What groups have you added "users" to..

rich

Read other 5 answers
RELEVANCY SCORE 78.8

Hello All,

I want to dual boot XP Pro , 2000 Server and 2003 Server and wanted to check the best order to instal these OS's?

Can anyone help?
 

Read other answers
RELEVANCY SCORE 78.8

Currently we are on an NT network with a few 2000 servers tossed in. Today I learned that the plan is to migrate everything to Linux. Lets assume that this only applies to the servers and that the users will still operate with 98/nt/2000/xp. What are your thoughts on this?

I put this in this forum for a reason. Because I'd rather get the advice from 2000 and 2003 experts who know what Linux cannot replace than to hear the Linux fanboys and anti-Microsoft activists praise it to the high heavens.

What would your concerns be if this was done on your network? What problems have you encountered if you'd tried this? Or what successes? Know of any businesses that have done this successfully?
 

A:Is Linux ready to replace Windows 2000 server and 2003 server?

Read other 9 answers
RELEVANCY SCORE 78.8

IP Network: Dhcp server works fine. (CISCO ROUTER)

Windows 200o servers, Windows 2000 clients (up to dated, sp4, rollup1 etc) IS6sp1

Some pc's with IP dhcp , works ok
Some pc's with fixed IP, works ok

After changing fixed IP on a client to dhcp-IP, the client can not find the DHCP server.
change back to fixed IP, PC works fine again.

DHP server and other DHCP clients still working fine

Local Area connection status: only outgoing packets, no incoming.

reboot, or ipconfig /renew no solutions

Does someone know this problem ?
Pieter
 

Read other answers
RELEVANCY SCORE 78.8

We are facing a problem on one of our Domain Controller Server
The problem is, the server is Shutting down unexpectedly
attached file is dump file
Pls help me fix this problem.
Thanks in advance

A:blue screen error on windows server 2008 R2

Code:
BugCheck 124, {7, fffffa80071f9ae8, 0, 0}

Probably caused by : GenuineIntel
The Error Record shows us that the error was a result from a boot error, I would have suggest firstly testing the hard-drives. How much down time can you afford?


Code:
0: kd> !errrec fffffa80071f9ae8
===============================================================================
Common Platform Error Record @ fffffa80071f9ae8
-------------------------------------------------------------------------------
Record Id : 01cf0c6645f6b7a5
Severity : Fatal (1)
Length : 1304
Creator : Microsoft
Notify Type : BOOT Error Record
Timestamp : 1/8/2014 11:39:39 (UTC)
Flags : 0x00000002 PreviousError

===============================================================================
Section 0 : Generic (unformatted)
-------------------------------------------------------------------------------
Descriptor @ fffffa80071f9b68
Section @ fffffa80071f9bb0
Offset : 200
Length : 24
Flags : 0x00000000
Severity : Recoverable
Run some hard-drive diagnostics and follow these steps:

Hard Drive Diagnostic Procedure

Find your hard-drive manufacturer and run their tests.

Additional Tests:

SeaTools for DOS | Seagate
CrystalDiskInfo - Software - Crystal Dew World

Post a screenshot of Crystal Disk Info summary:

Screenshots and Files - Upload and Post in Seven Forums - Windows 7 Help Forums


Quote:




... Read more

Read other 2 answers
RELEVANCY SCORE 78.8

hello everyone

i'm facing an issue with my windows server 2008 R2 Domain controller, i am trying to get windows update but i am getting the Error Code 80070005!! i know this code is for insufficient rights to perform such task!! (i am using the Administrator with
full permissions)
i have tried all possible solutions that i found online. i even tried the subinacl tool but nothing happened. i also removed the firewall and antivirus (uninstall).
i tried to install the WSUS on an another server, the WSUS detected all the PCs and servers that are on the network, and all units start to get the updates, only this server didn't get the updates (status: not yet reported) and i tried all possible commands
wuauclt.exe /detectnow /reportnow

wuauclt /detectnow

wuauclt /reportnow

wuauclt
/resetauthorization /detectnow , 
 
PS: i have 8 servers running the same win 2008 R2, only this server is not getting updates 

could you please assist me :(

Read other answers
RELEVANCY SCORE 78.4

Hello,
I created the following performance counter using logman.exe. 

logman.exe create counter US_Triton_Perf_Log -b 9/23/2015 09:30:00 -e 9/30/2099 18:30:00 -r -s $server -si $frequence -cf $folder\$server.txt -f $logtype  -o C:\local\logs\Perfout_$Server --a -v mmddhhmm  -rf  $max_duration

When I do this across multiple servers specifically for Windows Servers 2008/2012, the counter is created to repeat and run everyday at 930PM and stops running everyday at 430PM. This works perfectly fine as intended. However, When I do this for a Windows
2003 server, my created counter is very different.
For example, in this case, I have set to the counters to start at 930AM and end at 1830PM, because I have set a maximum duration of 9 hours, the job terminates and begins on the next day, since I have the repeat option on. However, this does not apply to
our 2003 server; logman creates the job to run once a week in this case it would be on a Wednesday. In addiiton, I noticed that the job doesn't not even start at it's indented time. It actually does not start at all. I also notice that the jobs on all windows
2003 servers are created in a pending status, which then prevents me from removing the counter remotely. 

I would like to know if windows 2003 is capable of working like my win 2008/2012 servers using logman, and if historically, the job has to be kicked off through scheduled task. 




Both Jobs are using the same criteria, but a... Read more

Read other answers
RELEVANCY SCORE 78.4

Hiya

The Windows Server 2003 Statement of Support (SOS) for Microsoft Internet Security and Acceleration (ISA) Server 2000 lists the steps necessary for ISA Server to function properly on computers running Windows Server 2003. It includes information that an administrator needs to know for setup on both a clean installation of Windows Server 2003 and installations upgraded from the Windows 2000 Server family.

System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Internet Security and Acceleration Server 2000
Microsoft Internet Security and Acceleration Server 2000 Service Pack 1

http://www.microsoft.com/downloads/...48-8a4b-450e-bd03-1ed3d5e359da&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 78.4

Hiya

This document describes the monitoring scenarios that are supported by the Microsoft® SQL Server™ Management Pack Refresh and includes detailed instructions for configuring and tuning the Management Pack. This guide also includes reference information that lists the contents of the Management Pack, including reports, computer groups, scripts, default public views, and processing rule groups.
System Requirements
Supported Operating Systems: Windows 2000, Windows Server 2003, Windows XP

Run Microsoft Word to view the document.
http://www.microsoft.com/downloads/...b3-622a-4e2e-872e-08244565f254&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 78.4

Hi,

The procedure is as follows:
---------------------------------
Right-click databases -> Restore Database
I mark 'from device', click the '...' button & select 'File' in the dropdown, then brows to the file itself. Under 'select the backup sets to restore' I check the only checkbox there, then in the 'To Database' I select the name of the database in the file (a new DB name appears there as you select the file).

Then I press OK and receive the error message in the attached file.
I need to be able to complete the import.

Thanks,
Daniel.
 

A:Problem importing SQL Server 2000 *.bak files into SQL server 2005

Is this at all possible?
Is this the right forum?
 

Read other 3 answers
RELEVANCY SCORE 78.4

Hiya

This self-extracting executable, BOLNotes.exe, contains a document with updates to SQL Server Books Online for SQL Server 2000. These updates include corrections, clarifications, and new topics

http://www.microsoft.com/Downloads/release.asp?ReleaseID=31343

Also

MSXML 4.0 Parser and SDK

The Microsoft® XML Parser 4.0 Technology Preview has a number of improvements compared to the April release: XSD validation with SAX and DOM, schemaLocation attribute; Schema Object Model (SOM); faster XSLT engine; new faster SAX parser; true side-by-side functionality. Old non-conformant technologies are removed: old XSL with XSLPattern; uuid namespaces for XDR; proprietary XmlParser object; normalize-line-breaks property in SAX. There is no more support for replace mode and version-independent ProgIDs

http://www.microsoft.com/Downloads/release.asp?ReleaseID=31333

Regards

eddie
 

Read other answers
RELEVANCY SCORE 78.4

Hiya
This is a spoofing vulnerability that exists in the affected products and that could enable an attacker to spoof trusted Internet content. Users could believe they are accessing trusted Internet content when in reality they are accessing malicious Internet content, for example a malicious Web site. However, an attacker would first have to persuade a user to visit the attacker’s site to attempt to exploit this vulnerability.
Affected Software:

• Microsoft Proxy Server 2.0 Service Pack 1
• Microsoft Internet Security and Acceleration Server 2000 Service Pack 1 and Microsoft Internet Security and Acceleration Server 2000 Service Pack 2

Note The following software programs include Microsoft Internet Security and Acceleration Server 2000 (ISA Server 2000). Customers using these software programs should install the provided ISA Server 2000 security update.

• Microsoft Small Business Server 2000

• Microsoft Small Business Server 2003 Premium Edition

http://www.microsoft.com/technet/security/bulletin/ms04-039.mspx

eddie
 

Read other answers
RELEVANCY SCORE 78.4

I'm having this machine that is server 20003 SP1 and it can't reconize my Access 2000. Anyone know of any issues?
 

A:Server 2003 & Access 2000

Recognize the CD, the program itself, a databse file?
 

Read other 1 answers
RELEVANCY SCORE 78.4

Over the last year a co-worker and I have been developing a complex Job-Costing system in a Microsoft Access Database (4.0). It is a 50 Meg file that is on our Server. The problem is that only one person can Access the Database at a time. This is going to be hell when we accually release this to the other 15 people is the office. I have experimented with an access 2000 Project (MSDE Client/Server) but I dont think it is the option for our office. I was wondering what was needed to make our database multi-user. It says it can handle up to 255 multiple users, and 1 user is far from that limit.
Please give me all the information you can. Thanks.
 

A:Access 2000 -> Client/Server with Jet 4.0

Tools-Options, Advanced (I think) tab. Default login should be SHARED, not EXCLUSIVE.
 

Read other 3 answers
RELEVANCY SCORE 78.4

Hi.
I am developing a client/server access program at work and have been testing it recently and there is troubling problem. The speed is tremendously slow. I have a backend on the server (with only tables) and all other files in an mde file. With one person in the program it is not too bad, but still alot slower than I expected. Also, when 2 people are accessing the same backend the speed is just horrible.
I was wondering what would cause it to be so slow, and what I can do to try to speed things up?

Thanks alot.

- Guy
 

A:Access 2000 Server files

Read other 6 answers
RELEVANCY SCORE 78.4

Hey all,

I'm inexperienced with Windows Server 2008 and am setting up a "lab" or test server here at the company I work for's network.

In the intial configuration process, when setting up the Active Direct Domain Services, I'm stuck at the DNS server

Questions are...

-Do I install it?
-Will this interfer/mess up things with our main file server?

Sorry, a bit amateur with this stuff

Any help is appreciated
 

A:Windows Server 2008 - DNS Server..?

Bump...

Anyone?

Thanks
 

Read other 3 answers
RELEVANCY SCORE 77.6

hello Experts,

I am getting BSOD on lenovo T510 ( i7 M 620 Processor, 8 gb Ram).
the mesaage says nvlddmkm.sys error on BSOD.
The Laptop works fine .
I am trying to enable Hyper v on the Operating system.
In order to use it i have to enable virtualization and memory protection in Bios.

If i enable both virtualization and memory protection i get Bsod.
If i enable only one of them it works fine but do not solve the purpose
as i need to enable both in order for Hyper v to work.
I have attached the required files in attachment.
Please help!
I
Is Windows 2008 server R2 . . . - x86 (32-bit) or x64 ? 64 Bit - the original installed OS on the system? NO - an OEM or full retail version? Full Retail - What is the age of system (hardware)?
1.5 Year
- What is the age of OS installation (have you re-installed the OS?)
1.5 Year

A:BSOD nvlddmkm.sys error T510 Windows Server 2008 R2

Not the video driver but DirectX and I suspect that is being caused by your Symantec.

Symantec is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows


Diagnosing basic problems with DirectX

Read other 9 answers
RELEVANCY SCORE 77.6

Hiya

The SQL Server Critical Update Wizard will update editions of Microsoft SQL Server 2000 and MSDE 2000 that are vulnerable to the Slammer worm. All versions of the SQL Server 2000 Evaluation Edition can also be updated with the SQL Critical Update Wizard. However, Evaluation Edition can not be updated using SP3. MSDE 2000 ships with several Microsoft products, including Office XP. For a complete list of products that ship MSDE 2000, view the web page at Microsoft Products that include MSDE 2000.

The SQL Critical Update Wizard was developed specifically for the home and small business user, though enterprise customers may also download and deploy the wizard to their internal customers. The SQL Critical Update Wizard will walk you through the steps of detecting a vulnerability to Slammer and updating the affected files. SQL Critical Update Wizard runs on Windows® 98, Windows ME, Windows NT® 4.0, Windows 2000 and Windows XP. Please see Knowledge Base Article: 814372 for further information about this wizard. If you want to install SQL Critical Update on a cluster, use the SQL Critical Update tool instead of the wizard. For more information about updating clusters with SQL Critical Update or if you need more flexibility in detecting and removing security vulnerabilities, visit

SQL Server 2000 Security Tools.

System Requirements
Supported Operating Systems: Windows 2000, Windows 98, Windows ME, Windows NT, Windows XP

• Windows Installer 1.1 is required to run the ... Read more

Read other answers
RELEVANCY SCORE 77.6

What are the steps involved in sharing Windows 2000 Server and Windows 2003 Server resources over a network?
 

A:Solved: Server 2000 and Server 2003 Homework Help

Read other 7 answers
RELEVANCY SCORE 77.6

I have two domain controllers with different domain names but on the same subnet and with active directory installed. One domain controller is win 2000 and the other is win 2003. The computers are in a workgroup the users don't log on but are connected to the win 2000 box with shares to a program. If I take active directory off the win 2000 box and demote will that affect the computers that are In a workgroup connected to the shares? I want to install all the programs and shares on the new win 2003 box but one computer win not let me log on to the win 2003 box it says no domain available. What can I do to slowly migrate the programs and shares to the new server?
 

Read other answers