Over 1 million tech questions and answers.

BSOD after sleep or hibernation - "Driver Power State Failure"

Q: BSOD after sleep or hibernation - "Driver Power State Failure"

Hello,

I left my computer on and open this morning before I left for class. When I returned, I had a BSOD, which specified "Driver Power State Failure" (I did not copy down any numbers, as I probably should have). I did a forced shut down (held the power button) and then restarted it, where it fortunately works for now.

My laptop is an Dell XPS-15, about two years old. I have not had any problems with it until now, and the past week or so it has been freezing up. I downloaded the SF Diagnostic Tool, and the zipped folder is attached.

I am uncertain what action to take next. Could someone advise me in how to fix the issue?

Thank you!!

RELEVANCY SCORE 200
Preferred Solution: BSOD after sleep or hibernation - "Driver Power State Failure"

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD after sleep or hibernation - "Driver Power State Failure"

upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.

Read other 3 answers
RELEVANCY SCORE 155.2

I have been using my asus laptop but recently started blue screening. When trying to shut it down the screen will go black, but the system lights remain on and it remains running, however irresponsive. It also began showing a blue screen with the warning "Driver power state failure".

Even after a factory reset this problem remains. Any help to figure out the problem would be greatly appreciated.

A:BSOD "driver power state failure", when shut down or sleep

Hi Chalcogen & Welcome to the forums ^_^,

I have analyzed your only dump file and a summary of that is given below :-

Code:
**************************Mon Jul 21 15:05:53.798 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for win32k.sys

*** ERROR: Module load completed but symbols could not be loaded for win32k.sys

Probably caused by : memory_corruption

BugCheck 9F, {4, 12c, fffffa800aeacb00, fffff88001e9e800}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: CODE_CORRUPTION

FAILURE_BUCKET_ID: MEMORY_CORRUPTION_LARGE

MaxSpeed: 1900

CurrentSpeed: 2395


Processor may be overclocked!
Expected Frequency: 1900
Actual Frequency: 2395
Overclock Ratio: 1.26053

BIOS Version S550CM.202

BIOS Release Date 11/23/2012

Manufacturer ASUSTeK COMPUTER INC.

Product Name S550CM

??????????????????????????????????????????????????????????????????????????????????????``


Now, since the dump file blames the "Win32k.sys" which is a Windows Component, chance of it being at fault it extremely low. Below is a list of 3rd party drivers found over your system :-

Code:
**************************Mon Jul 21 15:05:53.798 2014 (UTC + 5:30)**************************
ASMMAP64.sys Thu Jul 2 14:43:26 2009 (4A4C7A36)
atkwmiacpi64.sys Wed Sep 7 07:14:52 2011 (4E66CC94)
AiCharg... Read more

Read other 3 answers
RELEVANCY SCORE 155.2

Hi, i keep having this issue. Anyone knows how to solve?
My minidump is https://skydrive.live.com/#cid=392FCBBA17F5ACA1&id=392FCBBA17F5ACA1%21187

A:BSOD when going sleep mode "DRIVER POWER STATE FAILURE"

Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation.

I would re-install newest driver available.

Read other 1 answers
RELEVANCY SCORE 142.4

I have been getting the BSOD since a few weeks and found out by trial and error that a USB-hub is causing the problem. Whenever I disconnect the hub before I shut off the computer I do not get the blue screen.
Yesterday I also got a BSOD that mentioned driver power state failure. After I had de-installed Ubuntu 10.04 (I wanted to see what people are talking about but did not really like it) that problem did not show up again, although I do not know if that is just coincidence.

I have enclosed the dump files as per your instructions and hope that somebody will be able to help me.
Thank you.

A:BSOD with "usbhub.sys" and "driver power state failure"

Welcome!

It does look as if your USB drivers are causing the issue.
BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Wed Apr 28 03:41:32.255 2010 (GMT-4)
System Uptime: 0 days 0:31:47.502
BugCheck 1000007E, {c0000005, 9482319c, ad39bb40, ad39b720}
*** WARNING: Unable to verify timestamp for libusb0.sys
*** ERROR: Module load completed but symbols could not be loaded for libusb0.sys
Probably caused by : libusb0.sys ( libusb0+428c )
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Mon May 10 03:46:15.009 2010 (GMT-4)
System Uptime: 0 days 0:00:15.272
BugCheck 124, {0, 8752f544, 0, 0}
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Mon May 10 05:22:31.146 2010 (GMT-4)
System Uptime: 0 days 0:02:23.393
BugCheck 1000007E, {c0000005, 9444b19c, adb53b40, adb53720}
*** WARNING: Unable to verify timestamp for libusb0.sys
*** ERROR: Module load completed but symbols could not be loaded for libusb0.sys
Probably caused by : libusb0.sys ( libusb0+428c )
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16... Read more

Read other 5 answers
RELEVANCY SCORE 135.6

Hi Folks,

I really hope you can help me, I followed the instructions to create the attachement.

What I know so far is that this machine has BSOD'd several times...The last 2 times a ultilty called BlueScreenViewer.exe says it's due to "Driver power state failure" caused by: ntoskrnl.exe

I checked event viewer for the time mentioned 6/17/2012 11:29:02 pm and it says there is system error "source:Bug Check" at that exact time

For anti-virus I have MS Security Essentials. For Spyware, I have Spybot S&D.
I use with Workstation 7 as a study too so it has hosed my VMs which is very disappointing. I would really like to root cause this to continue with confidence...

I know you hear this all the time...but... please help! I don't mind collecting info and checking into things, I am just out of my element a little here.

I looked throug the results of the permon report and it seems clean for the most part.

Thanks in advance,

Jay

A:BSOD "Driver power state failure" caused by: ntoskrnl.exe

Is there anything else I can do to help action this post? Thanks

Read other 9 answers
RELEVANCY SCORE 135.6

My Alienware M17x suffers daily, random BSODs, I think most are Driver Power State Failures. These persist when I re-install my NVIDIA drivers (I even tried using Driver Fusion to get a clean install), but they do seem more frequent with the recent beta drivers. Maybe it's my Intel display drivers...? BSODs occur when starting programs, ending programs, in programs, and when I have everything closed. Random.

I'm open to the idea that it could be physical damage (if that's possible). My laptop shipped with a busted DVD drive, so if that's a physical issue, there could be others.

Changing my anti-virus from Avast to MSE was advised on another forum but made no difference.

A possibly-completely-unrelated symptom: my laptop won't boot (freezes on splash screen) when I have a USB device plugged in (like my mouse). Changing my boot order doesn't seem to fix this.

Thanks for your time and help! My warranty expires in two weeks but I'm in Africa so Dell won't send home support :P

A:Frequent BSOD "Driver Power State Failure," No pattern that I see

Hello oldbenkenobi

Your last two dumps tells us just the same thing.
It is your mvidia display driver that is not installed correctly. And ACPI unable to load it correctly.

Code:
0: kd> !irp fffffa80076e96b0 1
Irp is active with 4 stacks 2 is current (= 0xfffffa80076e97c8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
Flags = 00000000
ThreadListEntry.Flink = fffffa80076e96d0
ThreadListEntry.Blink = fffffa80076e96d0
IoStatus.Status = 00000000
IoStatus.Information = 00000000
RequestorMode = 00000000
Cancel = 00
CancelIrql = 0
ApcEnvironment = 00
UserIosb = 00000000
UserEvent = 00000000
Overlay.AsynchronousParameters.UserApcRoutine = 00000000
Overlay.AsynchronousParameters.UserApcContext = 00000000
Overlay.AllocationSize = 00000000 - 00000000
CancelRoutine = 00000000
UserBuffer = 00000000
&Tail.Overlay.DeviceQueueEntry = fffffa80076e9728
Tail.Overlay.Thread = 00000000
Tail.Overlay.AuxiliaryBuffer = 00000000
Tail.Overlay.ListEntry.Flink = fffff80003070b00
Tail.Overlay.ListEntry.Blink = fffff80003070b00
Tail.Overlay.CurrentStackLocation = fffffa80076e97c8
Tail.Overlay.OriginalFileObject = 00000000
Tail.Apc = 00000000
Tail.CompletionKey = 00000000
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8007f89c30 00000000 fffff8800f3c1ca8-fffffa800b30cca0 Success Error Cancel pending
\Driver\ACPIUnab... Read more

Read other 5 answers
RELEVANCY SCORE 135.6

I'm getting a BSOD pretty much every time I shutdown the PC. Has only just started happening in the last couple of weeks.

DRIVER_POWER_STATE_FAILURE
caused by driver: ntoskrnl.exe

I've attached the SFDiagnostic here - thanks.

A:BSOD - ntoskrnl.exe "driver power state failure" at shutdown

Hi thedriver.

The BSODs are caused by REALTEK 2832U USB Driver (c:\windows\system32\drivers\rtl2832uusb.sys)





Quote:
Windows Error Reporting: Fault bucket X64_0x9F_3_POWER_DOWN_IMAGE_RTL2832UUSB.sys, type 0
Event Name: BlueScreen
Response: Not available
..........;Analysis symbol: X64_0x9F_3_POWER_DOWN_IMAGE_RTL2832UUSB.sys
............



Code:
BugCheck 9F, {3, fffffa8008604060, fffff80001f4a518, fffffa800ae4e710}

*** WARNING: Unable to verify timestamp for RTL2832UUSB.sys
*** ERROR: Module load completed but symbols could not be loaded for RTL2832UUSB.sys
Probably caused by : RTL2832UUSB.sys

Followup: MachineOwner
---------
And the driver is old enough.

Code:
fffff880`07778000 fffff880`07785000 RTL2832UUSB T (no symbols)
Loaded symbol image file: RTL2832UUSB.sys
Image path: RTL2832UUSB.sys
Image name: RTL2832UUSB.sys
Timestamp: Wed May 04 14:05:12 2011 (4DC10FC0)
CheckSum: 0000ACF2
ImageSize: 0000D000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Some information about what this driver does: Realtek
Unfortunately I am unable to search an appropriate update for you. I hope you know the sources to get it, as you are using it.

If you can, update the driver. Otherwise, dont use it.

Read other 3 answers
RELEVANCY SCORE 135.6

i Bought a new laptop DELL inspiron 3542 i7 model. I had problems with it like BSOD, slow perfomance and touchpad. I contacted dell and they replaced the Hard drive as well as the touchpad. But i was still getting BSOD whenevr i open the dell touchpad properties. So i uninstalled the driver. Also when i launch Crysis 3 the game freezes at the game launch itself and the touchpad stops working but mouse works and then BSOD. I uninstalled the nvidia geforce 840 m driver completely and installed the beta version but still i am facing the problem!! And the most important thing is that this happens only while i use my laptop on its battery. When i plug in the charger it never happens..i never see bsod while charging. Today i tried something..i was using my laptop with the AC adapter plugged in (charging) and then i suddenly unplugged it and my touchpad froze (while external mouse still working) and i got the error (BSOD) " DRIVER POWER STATE FAILURE". Games like sniper 3, cod: ghosts works fine..but when i launch crysis 3 or GTA 4, i get the error..But when plugged in, all the games works smoothly. Please help me, i have bought this laptop just 21 days before!!
One more thing: Last time when i reformatted my hard drive(old one) this problem was solved..but with is new hard drive i have formatted it 3 times and installing windows but it didnt help me

A:BSOD!! "Driver Power State Failure" while not charging!!:(

Minidump file is missing. Please upload it.

Read other 13 answers
RELEVANCY SCORE 135.6

Hi all!

I have a new laptop(HP 250 G3 Notebook) with Windows 8 initially installed on it.
I formatted it and installed Windows 7 Pro 32bit.
Few hours later,the 1st BSOD occurred when I was trying to hibernate the system.
Kindly note that it has some drivers missing(as in the print screen attached) and I'm still struggling to find it.
Please, help me out with this.

Thank you!

A:BSOD with "Driver Power State Failure" message

Please read BSOD Posting Instructions

Read other 5 answers
RELEVANCY SCORE 135.6

New windows 7 install on one of my home built workstations. I have an appearantly random BSOD. It sometimes runs for days, sometimes hours. I may have multiple issues (I have not been around to see it). Usually I start folding at home (stanford project) and leave it when I am not using the terminal for CAD, CAM or FEA. I just upgraded to windows 7 for this build so I would fall in the noob catogory for windows 7 user. (example:I just figured out how to unhide all the folders). I am also not the only user of this machine so who knows what has been done in the last couple weeks.

The hardware is all the same as it was running xp with the exception of the harddrive (new Intel 520 240gb ssd) on a fresh OS install from new hd. Also the motherboard got a bios update. From the name of the BSOD I would guess my drivers need updating but between windows update, intel updates and EVGA updates I haven't found any that haven't been updated. I updated my forum computer hardware list if you need that.

Any help fixing this would be great.
// edit, files didn't attach properly

A:BSOD random, "Driver Power State Failure"

Sorry for the second post // edit to add files.

Read other 2 answers
RELEVANCY SCORE 135.6

Every so often my Acer Aspire 5315 laptop goes into BSOD and states Driver Power State Failure. It wasn't on for long enough so couldn't write down the rest of the numbers ETC..
I have an Acer Aspire 5315 Laptop
Windows Vista Basic SP1
New hardware includes a 7 port USB Hub made by Advent and also a 1TB Buffalo Drivestation External Hard drive

I have ran various scans for viruses malware ETC. including Norton 360 and Spybot Search and Destroy
 

A:Solved: BSOD "Driver Power State Failure" Help :)

Read other 11 answers
RELEVANCY SCORE 135.6

Every couple of days, I get a BSOD "Driver power State Failure".

Drivers are up-to-date, no overclocking.

Please see attached zip file with debug info (which is pretty much abracadabra to me).

Thanks for your help!

A:BSOD "Driver power State Failure" every few days

Trinnion, I'll see if I can help you. I have looked at your last 6 dump files. 5 of the 6 blamed

Code:
usbaapl64
start end module name
fffff880`07e36000 fffff880`07e48000 usbaapl64 T (no symbols)
Loaded symbol image file: usbaapl64.sys
Image path: \SystemRoot\System32\Drivers\usbaapl64.sys
Image name: usbaapl64.sys
Timestamp: Tue Nov 27 17:38:02 2012 (50B54EDA)
CheckSum: 0001669F
ImageSize: 00012000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Which is your Apple iPod/iPhone Mobile USB device driver

Also blamed in 1 each was

Code:
EpfwLWF
start end module name
fffff880`043eb000 fffff880`043f9000 EpfwLWF T (no symbols)
Loaded symbol image file: EpfwLWF.sys
Image path: \SystemRoot\system32\DRIVERS\EpfwLWF.sys
Image name: EpfwLWF.sys
Timestamp: Thu Aug 15 09:55:11 2013 (520CEBCF)
CheckSum: 0000AF76
ImageSize: 0000E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Which is ESET ESS/NOD32 driver
and


Code:
atikmpag
start end module name
fffff880`03e7d000 fffff880`03f11000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Thu Mar 28 20:09:45 2013 (5154E9D9)
CheckSum: 00091A60
... Read more

Read other 9 answers
RELEVANCY SCORE 135.2

I recently upgraded my motherboard, processor and memory, then installed a fresh copy of Windows 7 x64 Pro. I've been having problems from day 1. Originally, the computer would hang at either "logging off" or "shutting down" whenever I'd try to restart the machine (which is frequently when you're having to install drivers and programs). Now, it will still hang, but will then BSOD on me.

I've also come home once or twice and found that it'd BSOD'd while I was away. I think I've updated all the drivers, but like I said - I've been having issues from the start, and I'm not sure everything finished installing cleanly.

BSOD error has consistently been "Driver Power State Failure".

Any help would be greatly appreciated. Dumps attached.

Thanks!

A:BSOD with "Driver Power State Failure" -new build - hangs on shutdown

I'd still love to know what was messing my system up, but I ended up doing a complete reinstall anyway.

My Windows 7 key is an upgrade key, and Microsoft makes finding install media unnecessarily difficult. The image I used the first time was a bit... sketchy. I'm hoping that this time around I won't have the same issues, but I guess only time will tell.

Read other 1 answers
RELEVANCY SCORE 135.2

I recently received a blue screen error stating "driver state power failure" 0x09f. ntoskrnl.exe error
This is the first time i've seen this screen although my memory dump files seem to tell another story.

Computer was a barebone comp from tigerdirect
Win 7 x64
8gb ram

not sure what else you need. Here is the link to the minidump files....


Thanks for any help I can get.

*edit* sorry for the single file zip. There should be two i will try n upload the second
 

A:BSOD error 0x09f "driver state power failure" Win7

second dump file..had to zip in order to not exceed size limit
 

Read other 7 answers
RELEVANCY SCORE 134.8

Hello, my bsod was solved after updating the nvdia few months ago but then it started again, there wasn't any blue screen when i use AutoDesk maya 2 months ago but now it keep having blue screen when i use maya for like 1 - 2 minutes. Thanks for the help.

DESKTOP-2HINSK4-Sun_11_09_2016_160240_97.zip

Read other answers
RELEVANCY SCORE 134.8

Hi,

Been getting this BSOD for a while at least once a day. Can't identify any pattern. It's been worse since I formatted a few months ago. I assume it's just a matter of updating an old driver but I've been unable to identify which one.

Running Windows 7 Home Premium x64. Please see attached dump file.

Thanks in advance for your help!

A:BSOD "Driver power state failure"

Code:
Name [00000014] Realtek RTL8188CE Wireless LAN 802.11n COMBO PCI-E NIC
Driver c:\windows\system32\drivers\rtl8192ce.sys (1005.11.1203.2010, 1.05 MB (1,105,000 bytes), 13/10/2012 2:10 AM)
The driver's date is :

Code:
lmvm rtl8192ce
start end module name
fffff880`04e4e000 fffff880`04fb9000 rtl8192Ce (deferred)
Image path: \SystemRoot\system32\DRIVERS\rtl8192Ce.sys
Image name: rtl8192Ce.sys
Timestamp: Fri Dec 03 16:26:21 2010 (4CF8CCD5)
CheckSum: 00118EED
ImageSize: 0016B000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Realtek


Code:
fffff880`03785908 fffff880`010a0307Unable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
iaStor+0x70307
Get rid of intel rapid storage.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "Disc Drives" by clicking on the triangle in front of it.
Select one item under it, right click, uninstall.
Continue the process for all items under "Disc Drives"
Now restart the computer. At restart, windows will auto configure the appropria... Read more

Read other 5 answers
RELEVANCY SCORE 134.8

Computer freezes and crashes irregularly when watching youtube videos in google chrome. was just a minor inconvenience, but I have recently installed adobe creative suite and if I have a video playing it will always crash into a BSOD after about 5 minutes of non-interactive freeze. Some sources I have found have hinted that it may be my Nvidia card drivers, but I have been unable to fix it.
DESKTOP-2F2KHAS-Mon_09_05_2016_124021_03.zip

Read other answers
RELEVANCY SCORE 134.8

Last night, when sending my computer to stand by I received the BSOD which included a message saying "power driver state failure" or something along those lines.

I recently reset my computer to the factory settings (via recovery disc), so the problem could be any of the dozens of applications I've installed since. This is the second time I received the BSOD since resetting my computer.

I suspect the problem might be related to my optical drive. Basically, what happens is that sometimes the drive will just stop working. It still shows up in "My Computer", but labeled as "CD Drive" rather than "DVD-RAM Drive" as it normally does, and it won't recognize any disk that is inserted. A reboot of the system usually "fixes" the problem, but not always. I also had this problem before resetting my computer.

I'm including the minidump files here. I tried looking at them myself--I installed and ran the Windows Debugger, which came back with a message "Probably caused by : ntoskrnl.exe ( nt+5c846 )" But the debugger also gave a number of warnings about my "symbols" not loading properly.

I don't need to contact a semiotician, do I?

K
 

A:BSOD with "power driver state failure"

Read other 11 answers
RELEVANCY SCORE 132.8

Laptop Sony Vaio Model VPCCW1Z4E
OS Windows 7 Home Premium Service pack 1
Processor Intel Core DUO P7450.
Norton 360 V5.2.1.3, security software

Laptop starts up and can shuts down with out any problem.
If try to hibernation or standby, it take long time accessing disc then crashes. The problem only started when upgraded to service pack 1.

All drivers have been update using driver dating utility by WinZip.

Dump files & system health check report is attached.

Will appreciate any help or suggestion in resolving this issue.

Thank you.

A:Power State Driver Failure on putting PC to Sleep or Hibernation

Two issues

1-Virtally all of these were sysRelated to NETwNv64.sys Wireless WiFi Link Driver from Intel Corporation causing pci.sys to crash. I would re-install with newest driver available.
2-Your Symantec. I would remove and replace with Microsoft Security Essentials.

Symantec is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

Read other 1 answers
RELEVANCY SCORE 126

I'm using a ASUS S56CA ultrabook which runs VERY SLOWLY (takes 5+ minutes to boot up)!
OS is Windows 8.1 with ALL the latest Windows Updates installed.

I get the BSOD error "Driver_Power_State_Failure" usually when trying to enter sleep mode or using the Instant ON feature from ASUS .. neither of them work properly so after researching online I've decided to REMOVE the Intel? Rapid Storage Technology (Intel? RST) RAID Driver .. reboot and it's still VERY slow to boot. I've also tried to d/l new drivers from the ASUS website (only BIOS and few others) which were also installed but still get same results. The Intel HD 4000 Graphics is also out of date but I cannot d/l the update from the intel website .. shows file not available?

It also does NOT shut down completely .. select Shut Down from the menu and screen goes BLACK but power never goes off .. so I must manually hold the power button 5 seconds to shut down.

Finally, I've turned OFF ALL power saving features in Power Options .. no sleep .. no turn HDD off, etc.

I need to know how to fix this system so it does NOT take 5 minutes to boot up please.

I'm also attaching the last 4 minidump files for review .. plus I'll use the SF utility tonight to get the other suggested files on this forum.

A:Driver Power State Failure" error BSOD using Windows 8.1

Attached SF zip file as requested in your post notes. Hope someone can fix this soon .. system takes 5 minutes to boot up and still get BSOD even after updating Intel RST drivers and disabling power options.

Thanks,
Shane

Read other 2 answers
RELEVANCY SCORE 124.4

Stared getting this again. Seemed like it was fixed after removing DeamonTools but apparently not. Here's the latest dump files and info.

A:BSOD Driver Power State Failure after resuming from Hibernation

Uninstall ASUS Charger Driver (aicharger).

Read other 1 answers
RELEVANCY SCORE 124.4

I've been getting a BSOD about 5 - 10mins after resuming from Hibernation. I used bluescreenview to look at the dump file since I can't seem to install Debugging tools for windows, and found that ntsokrnl.exe was apparently causing it. I've tried using startup recovery to repair the boot.ini, it didn't find any problems and I used the driver verifier but, that doesn't seem to be turning up any results. I don't know what else I should try, so here I am. Any help would be great.

A:BSOD Driver Power State Failure after resuming from Hibernation

DAEMON Tools is known to crash window. Uninstall and test, report back.

Read other 3 answers
RELEVANCY SCORE 123.2

Hello,
I recently encountered a sudden blue screened error message with the following error that was suggested to research: "Power_Driver_State_Failure". I have only seen the error once thus far, but I fear that I may see it again at some point. It forced a restart, and the rebooting process was rather slow.
My operating system is Windows 8.1, and I have a Lenovo Y510p ideapad (nearly 9 months old).
Is this a significant error? Is there any way to prevent it from returning again?
Any assistance would be greatly appreciated!
Thank you,
~Trav.~
 

A:Blue screen error:" Power Driver State Failure"

Read other 16 answers
RELEVANCY SCORE 123.2

It seems to happen with more demanding games. Desktop, internet browsing and less demanding games it works very well, but during games such as Portal 2 or Skyrim it freezes my entire computer. When I try to ALT+TAB out it either goes to a blank screen or it just doesn't do anything at all. I usually have to force restart my computer in order to get it working properly again. Anyone have any ideas on what I should do next?

Note: I already ran the BSOD tool and attached the zip. XAVIERFRANCIS3-Thu_07_02_2015_161309_53.zip

Note 2: My PC's name is cooler than yours

A:Freezing while gaming. "Driver Power State Failure"

try this : Wagnard Tools then download DISPLAY DRIVER UNINSTALLER.
it ask you to reboot in safe mode when u launch the software, so reboot
then clean and uninstall your graphics card driver ,then install the latest one which can be found in the manufacturer website like nvidia,intel, or amd. or try this vid: https://www.youtube.com/watch?v=NiAbYY9U998

Read other 1 answers
RELEVANCY SCORE 122.8

Hey guys, as thread title states, I sometimes get "Driver Power State Failure" after logging into Windows 8 (not 8.1).

I believe it is my Sierra Wireless 760S Aircard 4G modem causing the issue but I'm not entirely sure, and sometimes it doesn't detect it until I unplug and reconnect the usb cable after booting.

Any help greatly appreciated.

Cheers

A:Sometimes get "Driver Power State Failure" after login

In the "Device Manager", find that device, look under "Properties / Power management " and uncheck " Allow this computer to turn off
this device to save power"

Read other 2 answers
RELEVANCY SCORE 122.8

BSOD occurs a while after waking up from sleep. Event manager shows the error "The driver for device \Device\Scsi\Ultra1 detected a port timeout due to prolonged inactivity. All associated busses were reset in an effort to clear the condition" had occurred before the blue screen. I have a Promise Ultra133 IDE controller; perhaps that's not cooperating with the sleep function?

Thanks in advance.

A:"Driver Power State Failure" Bugcheck

  
Quote: Originally Posted by FrostyFlakes


BSOD occurs a while after waking up from sleep. Event manager shows the error "The driver for device \Device\Scsi\Ultra1 detected a port timeout due to prolonged inactivity. All associated busses were reset in an effort to clear the condition" had occurred before the blue screen. I have a Promise Ultra133 IDE controller; perhaps that's not cooperating with the sleep function?

Thanks in advance.



this crash was caused by disk.sys. It can mean either the win 7 file (disk.sys) is corrupt or there is a problem with the controller.

I would run a system file check to verify the system files
to do that type cmd in search>right click and run as admin>>dfc /scannow (note the space between sfc and "/")

Let us know the results as you may have to re-run it.

Ken


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\032810-24133-01 - Copy.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`0402e500?
Symbol search path is: SRV*F:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
K... Read more

Read other 5 answers
RELEVANCY SCORE 121.6

I recently upgraded my system to windows 8 and I keep having error messages saying: "driver state power failure" and something to do with minidump files. Can anyone please help? I have attached my files:

mind you, I dont know very much about computers so go gentle please

A:"driver state power failure"

MSINFO32 shows some STOP 0xA0 errors and some errors related to L1C63x64.sys (your networking drivers).

The first errors are suggestive of a possible hardware problem (most likely the hard drive). Please try these free diagnostics: Initial Hardware Diagnostics Please understand that this can also be a low-level driver problem, so post back if the tests don't find anything wrong.

The ATK64AMD.sys driver dates from 2006. It is the ATK0101 Hot Key driver (this is one of those low-level drivers that I mentioned earlier). Please uninstall the current version from your system and then install the latest, Win8 version from the system/mobo manufacturer's website.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

ATK64AMD.sys Fri Oct 27 08:45:25 2006 (4541FF65)
ATK Hotkey ATK0101 ACPI UTILITY Driver
http://www.carrona.org/drivers/driver.php?id=ATK64AMD.sys

HECIx64.sys Thu Sep 17 15:54:16 2009 (4AB293E8)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys

NETwNs64.sys Thu Oct 6 10:45:03 2011 (4E8DBEEF)
Intel(R) Wireless WiFi Link 5000 Series Adapter Driver for Windows 7
http://www.carrona.org/drivers/driver.php?id=NETwNs64.sys

Analysis:
The following is fo... Read more

Read other 1 answers
RELEVANCY SCORE 121.6

Hello. I seem to be having the same problem as the original post...multiple BSOD per day with "Driver Power State Failure" listed as the reason. I do not want to assume the solution is the same as above until you take a look and advise. Thank you.

A:"Driver Power State Failure"

  
Quote: Originally Posted by biglos44


Hello. I seem to be having the same problem as the original post...multiple BSOD per day with "Driver Power State Failure" listed as the reason. I do not want to assume the solution is the same as above until you take a look and advise. Thank you.


Welcome to SevenForums biglos44.

They look similar honestly.

McAfee is a frequent cause of BSOD-s, consider uninstalling it with the McAfee Removal Tool and replace with Microsoft Security Essentials (To test)

Code:
fffff880`037df000 fffff880`037fb000 mfeapfk.sys
fffff880`037b2000 fffff880`037df000 mfeavfk01.sy
Description here:

Code:
mfeavfk01.sy ==== McAfee Firewall Total Protection 2010 http://www.carrona.org/drivers/search.php?id=mfeavfk01.sy

mfeapfk.sys ==== McAfee http://www.carrona.org/drivers/search.php?id=mfeapfk.sys
How to uninstall or reinstall supported McAfee products using the Consumer Products Removal tool (MCPR)McAfee Removal Tool - McAfee Uninstaller


Code:
Start Menu\Programs\McAfee Public:Start Menu\Programs\McAfee Public
Start Menu\Programs\McAfee Security Scan Plus Public:Start Menu\Programs\McAfee Security Scan Plus Public
Start Menu\Programs\Spybot - Search & Destroy Public:Start Menu\Programs\Spybot - Search & Destroy Public
Spybot is not the best security software. It slows down the system.Removing Spybot - Safer-Networking Forums
Microsoft Security Essentials. Recommend... Read more

Read other 1 answers
RELEVANCY SCORE 118.8

I've started getting driver power state failures BSODs after my computer goes to sleep.

These started in the last couple of weeks. It's happened twice today already. When I first noticed these occurring, I used System Restore to undo my last installs, but it didn't help.

I'd greatly appreciate any help fixing this.

A:BSOD after going to sleep, driver power state failure

Welcome

Your Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC is causing BSoD
Update to latest drivers

Code:
>[ 16, 2] 0 e1 fffffa8005c3a050 00000000 fffff800032d5200-fffffa8007049c50 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
\Driver\RTL8167 nt!PopSystemIrpCompletion
Args: 00014400 00000000 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8007049c50

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm Rt64win7
start end module name
fffff880`06d15000 fffff880`06d7f000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Wed Jan 26 19:34:03 2011 (4D4022CB)
CheckSum: 0006AFBB
ImageSize: 0006A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Source | Driver Reference Table

Also Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

→ RAM - Test with Memtest86+
→ Guide to using Memtest86+ - Geeks to Go Forums

Read other 9 answers
RELEVANCY SCORE 118.8

Been having issues with sleep mode with my build for months but in the past couple weeks it has gotten worse. When the computer goes into sleep, there's about a 50 percent chance it will wake up when I move the mouse. The other times I have to hard restart. In the past week it is now BSODing and giving me the attached dump reports. I'm pretty sure it's a driver issue but I can't narrow it down any more than that. Interested to hear what the experts think.

A:BSOD DRIVER STATE POWER FAILURE 9f, on sleep

Hi slash196.

Update the driver to TP-LINK 150Mbps Wireless Lite N Adapter from Download - Welcome to TP-LINK, by matching with your device number.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Also, if possible, update the BIOS to Version 1501 from ASUSTeK Computer Inc. -Support- Drivers and Download M4A88TD-M/USB3

Let us know the results.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8006a9e060, fffff80000b9c518, fffffa800a2fb920}

Probably caused by : ntkrnlmp

Followup: MachineOwner
------------------------------------------------------------------------------------------
Dispatch routines:
[00] IRP_MJ_CREATE fffff880016e7c30 ndis!ndisCreateIrpHandler
[01] IRP_MJ_CREATE_NAMED_PIPE fffff8800177e490 ndis!ndisDummyIrp... Read more

Read other 1 answers
RELEVANCY SCORE 117.6

Dear Sir/Madam,

I've been having this issue since updating to Windows 8.1. I will wake my computer from it's sleep and a few minutes later I get the BSOD. In one notable event early on, I got two in a row after the computer restarted from the previous BSOD.

I fiddled with my power settings (I was trying to avoid my computer actually shutting down during sleep/hibernation) a few months ago and after that I didn't have any BSOD events that I recall until this past week. When they do happen, they tend to happen in rapid succession, as you can see from the dates on the collected data I've attached (I see there's a .txt file with all my computer's information for you reference) - I've had one every day for the past three days.

I've read through many of these threads and tried several of the solutions. I am running verifier.exe since the BSOD has started up again since from what I can understand from reading the .dmp file and this forum that the message I'm getting about ntoskrnl.exe is misleading (?).

Please take a look at the dumps and other information collected from the DM Log Collector Tool and let me know if you can help me solve this problem.

Thank You.

A:BSOD Waking from Sleep (power state driver failure)

Hi, pnutbudder,

I've been having a similar problem since a few weeks ago. I suspect this is due to a recent Windows or driver update, since both of us had the same problem at the same time. I'm going to take a look at your dump files in a few hours, but in the meantime, could you tell me

1. whether you have Evernote or any Blizzard games installed
2. whether you've installed any new programs recently,
3. what graphics drivers you have installed,
4 what music or audio programs you have installed (eg, music players, movie editors, music studios and recording programs, game streaming programs)?

EDIT: Okay, I took a look at your dump files, and they point to a bad interaction between the "usbccgp.sys" and the "ksthunk.sys" driver. These are the same drivers that are misbehaving on my system, too (Lenovo Y510P). As far as I can tell, the only device that uses ksthunk.sys is the Lenovo EasyCam. Try this fix:

1. Download the "Broadwell" version of the camera driver on this page: http://support.lenovo.com/us/en/prod...loads/DS101169 . We're going to replace your current camera driver with Lenovo's original camera driver.
2. Open "Device Manager" by right-clicking on the lower left corner of the screen.
3. Double-click "Imaging Devices" to open it.
4. Right-click "Lenovo EasyCamera" and click "Disable". You should see a small downward-pointing arrow appear next to the picture.
5. Right-click "Lenovo EasyCam... Read more

Read other 5 answers
RELEVANCY SCORE 117.6

I have tried to test this issue my self by trying to read trough the DMP file and Event Viewer. (haven't done this before, so i think i have possibly overlooked something)
The computer model is: HP ProBook 430 G2
The things i have tried is uninstalling and updating the drivers.
Using another OS Disk (It worked fine when doing this)
Starting in safe mode (This also worked fine)
Checked advanced power settings (Was nothing wrong there from what i could see)

Read other answers
RELEVANCY SCORE 117.6

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8009DBD060
BCP3: FFFFF80000B9C518
BCP4: FFFFFA800ED33010
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\120410-48828-01.dmp
C:\Users\Jon\AppData\Local\Temp\WER-70980-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Yeah, i get this whenever my computer goes idle and into sleep mode, and when i shut down. Any way to fix???

minidump -- http://www.megaupload.com/?d=J07IWJQ0
 

Read other answers
RELEVANCY SCORE 117.6

Hello, all. Every now and again my laptop BSOD's when I leave it on sleep mode over night. Today the laptop lit up and started running while it was closed and I opened it to see the Driver_State_Power_Failure error message. Attached are the files gained from the SF Diagnostics Tool. Any help is greatly appreciated.

A:BSOD During Sleep Mode - Driver State Power Failure

Hello fran.

It appears that Avast is causing the BSODs there.

avast! Self Protection Driver

Code:
fffff880`02677de8 fffff880`068e2940Unable to load image \SystemRoot\System32\Drivers\aswSP.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSP.SYS
aswSP+0x2f940
Description here: Driver Reference Table - aswSP.SYS

avast! Virtualization Driver

Code:
fffff880`02677d68 fffff880`066d32ccUnable to load image \SystemRoot\System32\Drivers\aswSnx.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
aswSnx+0x4e2cc
Description here: Driver Reference Table - aswSnx.SYS

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Using more than one antivirus program is not a good practice. It will make your system unstable in turn. Uninstall McAfee Using McAfee Removal Tool.

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it... Read more

Read other 1 answers
RELEVANCY SCORE 117.6

New build i7 asrock motherboard W8 Pro. when waking from sleep everytime I get driver_power_state_failure BSOD.
Looking for some help on where to start. Updated the bios and everything else works great.

Thanks for any advice

Attachment 14584

A:BSOD Driver Power State Failure when waking from sleep

You have 3 hard drives - what is the make/model/wattage and age of your Power Supply?

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:





There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.
- Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with you... Read more

Read other 5 answers
RELEVANCY SCORE 117.6

Hey!

I got an BSOD from sleep mode. Was off to go outside the summer heat today and when I came back... BSOD..


However the system managed to dump two files for me on BSOD.

Take a look and thanks for the help you give me :)

A:DRIVER POWER STATE FAILURE Sleep mode BSOD.

Hello,

Please take a look at the following thread and perform all of the requested steps.

Once you have all the requested reports please attach back here.

http://www.techsupportforum.com/foru...ta-452654.html

One dump is really not sufficient to determine the cause. The reports will also provide other info to help diagnose the issue.

The dump provided indicates a problem with the Realtek Network driver please try updating or re-installing this driver.

Realtek

I would also suggest that you fully update Windows including the Windows 7 Service Pack.


Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`03268000 PsLoadedModuleList = 0xfffff800`034a5e50
Debug session time: Fri May 10 12:00:54.715 2013 (UTC - 4:00)
System Uptime: 0 days 8:41:33.010
Loading Kernel Symbols
...............................................................
................................................................
...........................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *... Read more

Read other 2 answers
RELEVANCY SCORE 116.4

I'm using a Lenovo Y50 running Windows 8.1. This issue has been happening every now and then for the past week or so. I noticed it occurs briefly after waking the computer from sleep mode. I can get to the desktop but about a minute after waking, the laptop will freeze up and give me a blue screen saying it was a DRIVER_POWER_STATE_FAILURE. I'm assuming this error has to do with some driver, but I don't know how to figure out which driver is the one causing the issue. I looked in Device Manager and can't find any yellow exclamation marks pointing out issues.

Here's a link to the most recent dmp file:
https://drive.google.com/file/d/0B2kQd8xpvK9STnd3MjVFWHJJOEE/view?usp=sharing

Thank you in advance to anyone who can help me out with this!
 

A:BSoD - Driver Power State Failure after waking from sleep mode.

For the time being and for troubleshooting, please uninstall Trend Micro and just
utilize Windows Defender. Trend Micro can be reinstalled once the problem is isolated.
http://esupport.trendmicro.com/en-us/home/pages/technical-support/1105809.aspx

What is all plugged in via USB?
Did this started happening after installing/updating Razor Synapse?
 

Read other 1 answers
RELEVANCY SCORE 116.4

I am getting a BSOD mostly when I turn the computer on from sleep mode during sleep wifi will be on and most probably 1 of the browsers would have been working.

Reinstalled Windows 7 on Oct 8 and downloaded some drivers from the net.

I have uploaded the SF diagnostic zip file

Any help would be greatly appreciated

A:BSOD after turning computer on from sleep DRIVER POWER STATE FAILURE

Welcome aboard. Is there any reason that you haven't installed service pack 1?

Read other 9 answers
RELEVANCY SCORE 116.4

Hello

I am experiencing a BSOD (DRIVER POWER STATE FAILURE) error with my ACER notebook.
It always come up after I put the computer in sleep mode.

After dozen of search and websites, I found this forum.

I hope you will be able to help me.

Please find below the informations about my OS
- Windows 7 Home Premium Edition
- x64
- OEM
- age of the system : 3 years old. The hard drive has been replaced 1 year ago.
- age of OS installation : 2 days old (reinstalled from the recovery disk)

I have also attached the System Health Report AND the BSOD Dump & System File Collection report.

Let me know if you need something else... and Thank already !

A:BSOD after sleep mode, 0x0000009f (DRIVER POWER STATE FAILURE)

Please install any Windows Updates you have not yet installed. I notice you do not have Service Pack 1 installed yet.Update to Service Pack 1 (SP1)Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 (KB947821) [August 2011]

Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [August 2011]

Steps to follow before you install Windows 7 Service Pack 1 from the Microsoft Download Center

Service Pack 1 Download site




Crashes indicate USB device issues.Start with USB Driver - General Fix for Problems to resolve the USB issues. Also, USB ports can sometimes enter a safe power state to protect the system from power surges due to USB devices. To reset the USB ports to a nominal power state:
Shut down and turn off the computer.
Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
"Remove the computer from any port replicator or docking station, disconnect
cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
Hold down the power button for 30 seconds. This closes the circuit and ensures all
power from components is drained t... Read more

Read other 1 answers
RELEVANCY SCORE 115.2

i guess i've been having this problem for about a month or so now and it's really becoming frustrating because everytime i have to leave my computer i have to shut it down if i don't want a BSOD..

i hope that someone can help me... every time i try to hibernate my laptop which is a HP DV4 Windows 7 Laptop i get a blue screen of death. it only started happening recently....maybe after i installed bit-defender..i'm not really sure..but it was doing fine before bit defender......

i used blue-screen view and with each time it registers a error it's with the driver for the NTOSKRNL.exe... i really hope that someone could help me because i just want my computer to go back to normal....and i wish that the problem has nothing to do with bit-defender......

tell me what you need and i'll try my best to get it to you so you can assist me with this problem cause i'm kinda new to the whole forum thing....

thanks..

A:[SOLVED] BSOD Driver Power State Failure When Hibernating/Sleep Windows 7 HP DV4

Hi and welcome to TSF please follow the instructions here http://www.techsupportforum.com/f217...ns-452654.html

Read other 17 answers
RELEVANCY SCORE 115.2

Hello all

This is my first post in here. Please bear over with my English – it is not my native language.

My problem is on a Media Centre machine where I recently upgraded Motherboard and processor. I have the following setup on the machine:
SILVERSTONE Grandia 04
DeZen PSU 500 Watt, TitanPower, 17-19 db
MB: Asus P8H77-MLE
CPU: Intel i3 2120
2x4 GB Corsair Vengeance ram (just bought new ones to see if it would help)
OCZ Agility 3 SSD 120 GB
1,5 TB WD Caviar Green
Asus P7131 Tuner
TERRATEC Cinergy DT USB XS Diversity
Hauppauge! WinTV-NOVA-T-Stick-Diversity
Hauppauge! Smart CI USB

My previous setup was with a AMD 240e but I have made a clean install.

I use Microsoft Security Essentials for antivirus and have firewall turned on.

The Media Centre machine is on for 24/7 on sleep mode for recordings or turned on for showing recordings.
Since the upgrade I have BSOD most times after it is turned on after sleep. The STOP occurs 4-5 minutes after the wake up either the wakeup is initiated from a recording or from user. I even see BSOD occur in the middle of the night where I have no recordings or other activity.

I have made several new install and tried to exclude the SSD and install a 32 bit Win7 – but the BSOD still occurs 4-5 min after awake.

I have updated all drivers and tried to run Verifier with no luck.

Hopefully someone can help

A:BSOD after sleep mode, error DRIVER POWER STATE FAILURE 0x0000009f

I have updated the Perfmon details - I had forgot to run the Windows Experience Index

Read other 9 answers
RELEVANCY SCORE 107.6

ive turn my laptop in to the shop two times and theys just reinstalled windows and says its they cant find the problem.
Its a hp pavilion dv6-6132eo.
anyone knows what to do?

A:blue screen "power state failure"

Welcome aboard.

Code:
!irp fffffa800c9e07e0
Irp is active with 12 stacks 8 is current (= 0xfffffa800c9e0aa8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa80089f1060 00000000 fffff80002cbcb40-fffffa800bee7b90 Success Error Cancel pending
\Driver\usbhub nt!IopUnloadSafeCompletion
Args: 00016600 00000001 00000001 00000005
[ 16, 2] 0 e1 fffffa800a020e20 00000000 fffff80002cbcb40-fffffa8008e43a40 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\iBtFltCoex.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iBtFltCoex.sys
*** ER... Read more

Read other 6 answers
RELEVANCY SCORE 106.8

I just got this new
HP Pavilion dv6-6b91eo laptop:

Product number: A3L50EA#UUW
Intel i7-2670QM CPU @ 2.20GHz
8 GB Ram
1 TB Harddrive 5200 rpm
Radeon 6770m 2 GB dedicated
Windows 7 Ultimate 64-bit
Full HD anti-glare

it's a very nice computer, but i already experienced alot of problems with it.

1. the computer display is set to turn off after 5 min. as standard, then you have to move your mouse to turn it on again. but the problem is that some times when the display is off i can't turn it on agian no matter which buttons i press not even when moving the mouse, but the laptop is still running, so i have to hold the power button 'till it turns off, and then when i turn it on the laptop will work just fine. what's wrong?

2. some times when i use the computer and everything just work fine, then suddenly it won't open programs like itunes, task manager etc. and it's kinda running slow too, and it's all pretty strange, so what i do is i press start and then shut down, then it will begin to shut down and shows the shutting down logo, but then it will just keep on showing that logo. so i have no choice, the only thing i can do is hold the power button agian. and when turn it on, it all work nice again. what's with this?

3. then when i leave the laptop on for a while and comeback it will show a bluescreen which says "Driver power state failure". and the cpu is running at its max, the only way to shut it down is to hold the power buttom again:

her... Read more

A:Bluescreen. "Power state failure"

Hi -

Run Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or until it BSODs your system, whichever is less. Then . . .

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions - Windows 7 & Vista

Also, run Speccy - http://www.filehippo.com/download_speccy
- "File" | "Publish Snapshot" | Paste URL into your next post

Regards. . .

jcgriff2

`

Read other 14 answers
RELEVANCY SCORE 106.8

I just got this new
HP Pavilion dv6-6b91eo laptop:

Product number: A3L50EA#UUW
Intel i7-2670QM CPU @ 2.20GHz
8 GB Ram
1 TB Harddrive 5200 rpm
Radeon 6770m 2 GB dedicated
Windows 7 Ultimate 64-bit
Full HD anti-glare

it's a very nice computer, but i already experienced alot of problems with it.

1. the computer display is set to turn off after 5 min. as standard, then you have to move your mouse to turn it on again. but the problem is that some times when the display is off i can't turn it on agian no matter which buttons i press not even when moving the mouse, but the laptop is still running, so i have to hold the power button 'till it turns off, and then when i turn it on the laptop will work just fine. what's wrong?

2. some times when i use the computer and everything just work fine, then suddenly it won't open programs like itunes, task manager etc. and it's kinda running slow too, and it's all pretty strange, so what i do is i press start and then shut down, then it will begin to shut down and shows the shutting down logo, but then it will just keep on showing that logo. so i have no choice, the only thing i can do is hold the power button agian. and when turn it on, it all work nice again. what's with this?

3. then when i leave the laptop on for a while and comeback it will show a bluescreen which says "Driver power state failure". and the cpu is running at its max, the only way to shut it down is to hold the power buttom again:

her... Read more

A:Bluescreen. "Power state failure"

Theoretically the USB Driver X64_0x9F_3_WUDFRd_IMAGE_usbhub.sys is causing what is called an inconsistent power state. But generally speaking, Microsoft drivers are never faulty. Use this tool to verify the actual culprit driver: Using Driver Verifier to identify issues with Windows drivers for advanced users

P.S. Don't forget to backup your data before you try this !

Read other 9 answers
RELEVANCY SCORE 105.2

I am experiencing an issue with my laptop where I can't allow it to enter sleep mode or else it will restart/appear to have restarted the next time I wake it up. At first I thought it might be a power options issue, but I made sure that the computer was set to sleep and not restart when I close the lid. I've checked the bluescreen viewer and the cause of the restart seems to come from a driver power state failure coming from ntoskrnl.exe+1fcc1e, hal.dll+6a37, and storport.sys+33f0.

I've already run sfc/scannow to check for damaged files and I was also able to replace them using a DISM command, so now scanning the computer doesn't run into any errors, but this driver error still persists.

Sidenote: The driver errors mainly started after I reinstalled Kaspersky onto my computer to fix some issues that I had with it. Before that I was getting a couple of kernel data inpage errors, the latest of which occurred June 1.

A:Driver Power State Failure in sleep mode

Hi M15 and welcome to the forums ^_^,

I am in the process of analyzing your dump files further. Below has been provided analysis of your dump files for Informative purposes.

Code:
**************************Fri Jun 6 04:50:12.040 2014 (UTC + 5:30)**************************Probably caused by : storport.sys ( storport!RaSendIrpSynchronous+70 )

BugCheck 9F, {4, 12c, ffffe0017919e880, ffffd00049969950}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_4_storport!RaSendIrpSynchronous

MaxSpeed: 1800

CurrentSpeed: 1796

BIOS Version V2.20

BIOS Release Date 02/18/2013

Manufacturer Acer

Product Name Aspire M5-481PT

??????????????????????????????????????????????????????????????????????????????????????``
**************************Fri Jun 6 01:42:48.219 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for iaStorA.sys

*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys

Probably caused by : iaStorA.sys

BugCheck 9F, {3, ffffe000d7f8e060, ffffd000ca5e9930, ffffe000da3955c0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_disk_IMAGE_iaStorA.sys

MaxSpeed: 1800

CurrentSpeed: 1796

BIOS Ver... Read more

Read other 12 answers
RELEVANCY SCORE 105.2

Hi,
I've been getting persistent BSOD's when attempting to wake up my computer (Lenovo Twist u230) from sleep. I am also sporadically getting Kernal Data Inpage Error BSOD while using my computer.

My machine is Windows 8, installed from factory with a recent refresh done. SFC /SCANNOW and DISM both come up clean. All of my hardware diagnostics are also clean.

Help!

A:Driver Power State Failure on wake from sleep

Which hardware diagnostics have you done?

Please run Driver Verifier according to these instructions: Driver Verifier Settings

Just a guess at this point, but try removing Diskeeper to see if that helps.
If not that, then try removing the Citrix software to see if it helps.

Analysis:
The following is for informational purposes only.

Code:
**************************Fri Oct 11 09:56:37.534 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\101113-15578-01.dmp]
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 20:21:57.335
Probably caused by :Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck 9F, {3, fffffa80036b7890, fffff800c68d07f0, fffffa800de92610}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa80036b7890, Physical Device Object of the stack
Arg3: fffff800c68d07f0, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa800de92610, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_ACPI_ANALYSIS_INCONCLUSIVE
CPUID: "Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz"
MaxSpeed: 1700
CurrentSpeed: 1696
BIOS Version GDETA1WW (1.61 )
BIOS Release Date 09/14/2013
Manufacturer LENOVO... Read more

Read other 1 answers