Over 1 million tech questions and answers.

Burnt out from error error error! Time to go back to Paper.

Q: Burnt out from error error error! Time to go back to Paper.

Hello there. I have been redirected here by jamanji, whom has been most helpful by the way.
My PC crashed a little over a week ago.
Rather than retype everything, I would like to give you the link to my post.
I am not 'Tech' per se, but I would like to try and resolve my problem myself,
To make a long story short... I had error 0xc000000f. I have 2 threads on the subject, but the first thread was useless.( I think)
I read gregrocker's tutorial.
I made a Kaspersky Disc. I have a Pop Up from Kaspersky.
saying if I continue...........

Here are the links.

confused by what type of disc to use

Error 0xc000000f

If you read this...Thank you for your time.

RELEVANCY SCORE 200
Preferred Solution: Burnt out from error error error! Time to go back to Paper.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Burnt out from error error error! Time to go back to Paper.

Ok mate one thing straight up the Kaspersky only requires a CD you can use a DVD but seriously a waste of useable space. Have been using Kaspersky security and tis rescue disk for years now so just the CD mate.

Just follow the prompts when you run the disk. It will boot (of course) but will not need Windows to do anything.

There are other options -

Bootable AntiVirus Rescue CD for Windows: Free Download any are good and again do not require Wndows to run.

If you can get it going then I would try this
http://support.kaspersky.com/viruses/utility < the top scanner TDSS Killer

Read other 9 answers
RELEVANCY SCORE 80.8

Run time error 8542 report width is larger than the paper width

this error appears when i operat some report in run time mode from program programmed using VB6 and Access 97

note thatprobel happen to some xp systems and dose not hapen with other Xp systems

i need solution for that problem

Osama Ghandour
 

Read other answers
RELEVANCY SCORE 79.2

yesterday, for some reason, windows10 installed itself into my windows7 OS. I didn't click on anything to do this; it acted on its own..... (***??)

and now, I have windows10. not only that, every time the computer goes on standby, and I wake it up, it goes into a blue screen.

attached is one of the errors. I've also seen "critical path error"

A:system error every time it comes back from standby

Can you access Safe Mode with Command Prompt?

If so, run this command: CHKDSK C: /F /R

Read other 6 answers
RELEVANCY SCORE 79.2

Hi can anyone please help, I have been trying to backup my pc. Windows 7 every time I try I get an error code 0x81000019. I am a novice when it comes to these sort of things and this error code is really getting me worried that my pc is going to stop working or even worse so any help will be greatly appreciated.
Thanks in advance
Beechams

A:Every time i try to back up pc i get error code 0x81000019. Help

Hi there

The built in Windows backup is usually hideous and not 100% reliable if you need to restore.

Download something like FREE MACRIUM and use that instead - much safer and better.

Macrium Reflect FREE Edition - Information and download

Cheers
jimbo

Read other 2 answers
RELEVANCY SCORE 75.6

 Attach.zip   5.75KB
  0 downloads
 ark.zip   2.47KB
  0 downloadsHi to everyone,

I am plagued by a number of malware on my computer. Thios laptop is a DEll Latitude D830 that runs microsoft xp professional. For one, my internet constantly redirects me to other sites. Most recently it pops open anew Iexplorer window that does not load and causes a win32 error when I am forced to go to the task manager to kill the program. Other times I get a wn32 error or I get something like a "generic service host problem" and my internet crashes and I have to reboot the laptop to get back onto the internet. My Norton anti-virus and my mcafee security can not connect to the internet for live updates even when i am on the internet. Norton's suggested remedies do not work. neither do McAfees. Here is my DDS TEXT:
DDS (Ver_10-12-12.02) - NTFSx86
17:39:42.82 on Sat 01/08/2011
Internet Explorer: 8.0.6001.18702
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.2046.1194 [GMT -5:00]
============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
svchost.exe
svchost.exe
C:\WINDOWS\system32\spoolsv.exe
svchost.exe
C:\Program Files\Broadcom\ASFIPMon\AsfIpMon.exe
C:\Program Files\In... Read more

A:generic host error, win32 error, internet redirecting all the time. please help

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. You can subscribe by clicking the Options box to the right of your topic title and selecting Track This Topic.

Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.

Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

Read other 2 answers
RELEVANCY SCORE 75.6

Hello all, I have lenovo T430s laptop that is configured with Bitlocker encruptions and TPM PIN entry. I don't think that has anything to do with the error msg I am getting but here it is. Error: 0271: Real Time Clock Error - Check Date and Time settings.Press Esc to continue or F1 to enter setup. I am unable to get into BIOS or even the login screen for Windows 7. Any advice would be appreciated.

A:Error: 0271: Real Time Clock Error - Check Date an...

It means you need to hit F1 to get into the BIOS to change the date/time. You will need to supply whatever passwords you have set on the BIOS or the hard drive.

Read other 9 answers
RELEVANCY SCORE 75.2

Hello,
I am trying to edit the data to open on a form based on selection on the combo box, here is the code below;

Code:
Private Sub CmdEditExistingRecord_Click() DoCmd.OpenForm "Master_data", acNormal, "", BuildFilter, acFormEdit, acWindowNormal End Sub Private Function BuildFilter() As Variant Dim varWhere As Variant Dim varstrat As Variant Dim varItem As Variant Dim intIndex As Integer varWhere = Null ' Main filter varstrat = Null ' Subfilter used for colors ' Check for Tendor_no If Me.CmbTendor > "" Then varWhere = varWhere & "[Tender_Number] Like """ & Me.CmbTendor & """ And " End If ' Check for buyer If Me.Cmbbuyer > "" Then varWhere = varWhere & "[BuyerID] Like """ & Me.Cmbbuyer & """ AND " End If ' Check for CategoryID If Me.Cmbcategory > "" Then varWhere = varWhere & "[CategoryID] Like """ & Me.Cmbcategory & """ AND " End If ' Test to see if we have subfilter for colors... If IsNull(varstrat) Then ' do nothing Else ' strip off last "OR" in the filter If Right(varstrat, 4) = " OR " Then varstrat = Left(varstrat, Len(varstrat) End If ... Read more

A:Run time error 3705 - Syntex error (Missing operator) in query expression Access

Read other 8 answers
RELEVANCY SCORE 75.2

I get this error everytime I try to open this site.

https://qweststore.cellmania.com/qwest/starz_detail.do?itemtype=starz

"Message: Object required
Line: 1562
Char: 4
Code: 0
URI: https://qweststore.cellmania.com/qwest/scripts/cm.js"

also get this:

Message: Unexpected call to method or property access.
Line: 264
Char: 5
Code: 0
URI: res://ieframe.dll/httpErrorPagesScripts.js

using I.E. 8 / Windows XP
all firewalls are down
no anti-virus software is running (including addons)
browser security is very minimal
addons are updated (or removed) latest version of java is installed
have latest version of flash and it is added onto I.E. browser
i meet all of the minimum requirements
What happens: I enter my email address into a form and click a button that should order this Starz thing I'm trying to get. When I click, it works and works and works until I finally get "page cannot load" error.

I have tried everything I've been able to troubleshoot with (via googling) and to no avail.

Also: I just got Qwest High Speed and MSN and Live (sort of a bundle) and my pc was updated -- I.E. to version 8 and whatever else Windows updated.

If you need more information, please let me know. (I also think I might be missing some libraries.

Thank you! :-D
 

A:Solved: Page load error every single time w/ error ...

Read other 7 answers
RELEVANCY SCORE 74.8
RELEVANCY SCORE 74.4

I've recently purchsed a new laptop with a combo DVD/CD RW drive. When trying to copy data (MP3, jpegs, etc) backed up on CD from my desktop, the drive often fails to read and I get error message "I/O Device Error" sometimes it will copy 100mb before doing this, sometimes it will not read anything. I've tried various CDs burnt on different PCs but all have failed. Purchased software seems toload OK. Even a CD burnt on my laptop failed to copy all the data back onto my hard drive, but all these Cs work on my desktop and work laptop.
The vendor insists that there is not a problem and it's common for some DVD/CD drives not to read all CDs. Is this correct. Is it because I'm trying to copy data by draging it? It's strange as it's an intermittent problem
 

A:I/O Device Error - Copy Data from Burnt CDs

If you can copy at least some DVD/CDs then the problem is media.
Make sure that the media has no scratches or dirt or finger prints on it.
Some drives are very picky as to media.
 

Read other 2 answers
RELEVANCY SCORE 74.4

Hi from Scotland. I get the above error as soon as I try to install a program called Carsoft,which is a car diagnostic program. I have a freshly installed copy of XP on an IBM Thinkpad, there are no other programs installed on the hard drive. I have tried right clicking and choosing"run as administrator" but get the same result, had a good look around the net but can't find anything exactly the same as my problem. I have used sysinfo and posted the results below. I have no antivirus as I will not be using it online at any time. Thanks for your time.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 2, 32 bit
Processor: Intel Pentium III processor, x86 Family 6 Model 8 Stepping 10
Processor Count: 1
RAM: 127 Mb
Graphics Card: ATI RAGE Mobility (IBM), 4 Mb
Hard Drives: C: Total - 19077 MB, Free - 16176 MB;
Motherboard: IBM, 266265G
Antivirus: None
 

A:run-time error '75' path/file access error

Read other 12 answers
RELEVANCY SCORE 74.4

Hi,
When I load the program Hijackthis appear the error:
Run-Time error '50003' Unexpected error

Hitalicus

A:With Hijackthis Run-Time error '50003' Unexpected error

Where are you trying to download it from?

Read other 5 answers
RELEVANCY SCORE 74.4

Faulting application explorer.exe, version 6.0.6000.16771, time stamp 0x4907deda, faulting module ntdll.dll, version 6.0.6000.16386, time stamp 0x4549bdc9, exception code 0xc0000005, fault offset 0x0002294f, process id 0x6fc, application start time 0x01c9d62fefd50d45.
 

Read other answers
RELEVANCY SCORE 74.4

when i go to the time settings and click on "Update Now" on the "Internet Time" tab, i get an error message saying that Windows can not synchronize the time. I checked the even viewer and found the following related error messages.
Please help. (using window XP)
Event Type: Error
Event Source: W32Time
Event Category: None
Event ID: 17
Date: 5/4/2007
Time: 11:14:38 PM
User: N/A
Computer: OFFICE
Description:
Time Provider NtpClient: An error occurred during DNS lookup of the manually configured peer 'NTP_server_IP_Address,0x8'. NtpClient will try the DNS lookup again in 15 minutes. The error was: A socket operation was attempted to an unreachable host. (0x80072751)

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Event Type: Error
Event Source: W32Time
Event Category: None
Event ID: 29
Date: 5/4/2007
Time: 11:14:38 PM
User: N/A
Computer: OFFICE
Description:
The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible. No attempt to contact a source will be made for 14 minutes. NtpClient has no source of accurate time.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
 

A:time synchronization error! (w/microsoft error codes)

Try adding a different Time Server with a registry edit. I use time.nist.gov at home.

http://www.pctools.com/guides/registry/detail/934/
 

Read other 2 answers
RELEVANCY SCORE 74.4

Hi Guys,

I am trying to digitally sign an xml document using client software. the application has a ' digitally sign button' and when i click on it I am getting this message "Run time error '75' path/file access error"
The digital certificate is in a usb drive. I am using vista HOme edition 32 bit version on a dell laptop.

There is no problem with digital ceritifcate or usb drive because i can digitally sign msword docs individually. the problem occurs only while using client software. i had successfully used the same client software and USB in signing xml docs in windows XP on a HP machine before.

Can somebody please help me resolve this issue.

A:Run time error '75' path/file access error

I really dont know the answer to this problem, but you could try a clean boot: Perform a clean startup to determine whether background programs are interfering with your game or program

and then digitally sing your document

Read other 1 answers
RELEVANCY SCORE 74

Run-time error 0, Run-time error 440 automation error
come up when i try to start malware byes it work for me and now these errors
come up

A:Run-time error 0, Run-time error 440 automation erro

  
Quote: Originally Posted by tz frantic


Run-time error 0, Run-time error 440 automation error
come up when i try to start malware byes it work for me and now these errors
come up


Hello Welcome to SF,

I found a fix in Malwarebytes Forum.

Start > CMD > Right Click Run as administrator > Then type the following commands one by one

regsvr32 mbamext.dll
regsvr32 ssubtmr6.dll
regsvr32 vbalsgrid6.ocx
regsvr32 zlib.dll

After try it and see whether it works

Source Run-time error 0, Run-time error 440 automation error - Malwarebytes Forum

Hope this helps,
Captain

Read other 4 answers
RELEVANCY SCORE 72.8

i got a random BSOD about an hour ago. i have uploaded/provided a link to download the compressed the DMP file. i should also add that a week ago i got a separate BSOD, and was told the problem was AVG (antivirus). I have found 3 DMP files, the first two are related to the first BSOD i had a week ago. The last one is the one i just got, today. Please let me know when you have finished with the link so i can delete the DMP file. Thanks
i dont know if todays BSOD has anything to do with this the previous two BSOD's last week. have also ran antivirus and have no virus.
The link to download the DMP file is:
https://www.dropbox.com/s/8tdm93jev18265l/120714-62296-01.zip?dl=0

A:BSOD error (didnt see what error name was in time)

This dump file also identified AVG as the culprit. Please remove it from the system using its uninstaller. AVG | Download tools and utilities
I recommend running Avast or MSE for the time being.

Code:
CLVirtualDrive.sys Mon Dec 26 14:26:47 2011 (4EF87617)
CyberLink Virtual Device Driver
http://www.carrona.org/drivers/driver.php?id=CLVirtualDrive.sys

GEARAspiWDM.sys Thu May 3 21:56:17 2012 (4FA2E2E1)
CD-ROM Class Filter Driver by Gear Software.[br]Also comes with iTunes
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys

BtAudioBus.sys Fri Jun 15 05:17:09 2012 (4FDAA935)
IVT Bluetooth Audio Bus Driver for Windows 7 (IVT BlueSolei)
http://www.carrona.org/drivers/driver.php?id=BtAudioBus.sys

IntcDAud.sys Tue Jun 19 16:40:51 2012 (4FE08F73)
Intel Graphics Media Accelerator HD Driver
http://www.carrona.org/drivers/driver.php?id=IntcDAud.sys

HECIx64.sys Tue Jul 3 00:14:58 2012 (4FF21D62)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys

Rt630x64.sys Mon Jul 30 18:03:12 2012 (5016B040)
Realtek PCI/PCIe Adapters
http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys

IvtUrbBtFlt.sys Wed Aug 8 15:43:46 2012 (50226D12)
Ralink Bluetooth Stack
http://www.carrona.org/drivers/driver.php?id=IvtUrbBtFlt.sys

RTKVHD64.sys Mon Aug 27 07:57:17 2012 (503B0C3D)
Realtek High Definition Audio Function Driver
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys

WirelessButtonDriver64.sys Thu Aug ... Read more

Read other 22 answers
RELEVANCY SCORE 72.4

I have an HP Laserjet III with Resolution Enhancement. This printer has an issue with and Error 13 being displayed and will not reset.

According to HP the Error 13 on this printer is Paper Jam.

There is no paper jam found. Any suggestions as to what else to look at?

Any help is appreciated.

Thanks.

Roland>>
 

A:HP Laserjet III 13 Paper Jam Error

Are you sure? No small pieces of paper stuck under the rollers? They hide well.............
 

Read other 3 answers
RELEVANCY SCORE 72.4

I'm having a real nightmare with my HP PSC 1355 All-In-One!
When I turn the power on the lights on the front light up, it makes the usual clunking noises then the amber 'Check paper' light starts flashing. I have changed the paper, put paper in, taken paper out, turned paper over, sworn at paper while inserting paper but to no avail.
I have opened the cartridge access flap on the front of the printer and had a look inside to see if there is anything jammed or obviously wrong in there but it all looks normal.
Anyone know how to fix it?
 

Read other answers
RELEVANCY SCORE 72.4

I'm having a real nightmare with my HP PSC 1355 All-In-One!
When I turn the power on the lights on the front light up, it makes the usual clunking noises then the amber 'Check paper' light starts flashing. I have changed the paper, put paper in, taken paper out, turned paper over, sworn at paper while inserting paper but to no avail.
I have opened the cartridge access flap on the front of the printer and had a look inside to see if there is anything jammed or obviously wrong in there but it all looks normal.
Anyone know how to fix it??!
 

Read other answers
RELEVANCY SCORE 71.6

I'm having a real nightmare with my HP PSC 1355 All-In-One!
When I turn the power on the lights on the front light up, it makes the usual clunking noises then the amber 'Check paper' light starts flashing. I have changed the paper, put paper in, taken paper out, turned paper over, sworn at paper while inserting paper but to no avail.
I have opened the cartridge access flap on the front of the printer and had a look inside to see if there is anything jammed or obviously wrong in there but it all looks normal.

Does anyone have any ideas...?
 

A:Solved: HP 1355 Paper Error

See if this helps,
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&dlc=en&docname=c00095617#

It give complete instructions for paper jams. There is also a link on the page if the cartridge light is also blinking.

Let us know
 

Read other 3 answers
RELEVANCY SCORE 71.6

I used to be able to print business cards on my HP C7250, now when I insert the business card paper it comes up with a mismatch error and will not let me print the cards. It's not a weight issue as the cards print just fine on plain heavy cover stock.

I have found little help online, just keep running into "New gen HP printers have faulty paper sensors" My printer is three years old and past warranty. Any way to repair this or to disable or override the paper sensor?

Thanks
Annette
 

Read other answers
RELEVANCY SCORE 71.6

Printer HP PSC 1410 thinks it has a paper jam - it hasn't! It will happily print test page after test page correctly (using up expensive ink in the process) but will not print any documents sent from the laptop. I have switched the printer on/off ad nauseam; removed and replaced the back cover several times; all to no avail. Needless to say the HP website/forum is of no real help with this problem (buy a new printer is the extent of the advice!). Is there any way to clear this erroneous message and get the printer working again?
 

A:Solved: HP Printer Paper Jam Error

Read other 16 answers
RELEVANCY SCORE 70.8

After having a paper jam in my Epson Stylus RX 620 the error message "Paper jam. Press the Color button. If the error is not cleared, please clear by hand" will not go away. I pressed COlor and the message did not go away. I manually cleared all evidence of a paper jam. There are no bits or pieces of paper left in the printer anywhere that I can find. The Setup button will not function. The buttons that do seem to function simply repeat the error message. There is nothing in the documentation that addresses this problem. This issue was previously discussed here but as that thread is expired I can't discover if anyone had a solution so I am compelled to start a new thread on this issue. How do I solve the problem short of buying a new printer?
 

Read other answers
RELEVANCY SCORE 70.8

I get a "paper mismatch" error when trying to print photos on 4x6 photo paper. I contacted HP and went thru a bunch of steps to solve this problem to no avail. I should mention that it used to work. If anyone on this forum has any tips/ideas I could try, I'd like to hear them. Kinda weird but if I load 8.5x11 photo paper, the 4x6 photos prints fine. Seems to me - that's when I should be getting a "paper mismatch" error. Thx!

Chuck
 

Read other answers
RELEVANCY SCORE 70.8

I am using Microsoft Word97, my printer is a HP Deskjet 5470 connected to a USB port. When I try to print an envelope I get a "Paper Size Error" from the printer. It occurs on both #10 and #6 3/4 envelopes. This was working fine before I had to reinstall Windows and all my applications.(Moderator edit: added Topic Description. jgw)

A:Paper Size Error printing envelope

Just solved my own problem. On the "Paper/Quality" tab of the Printer Properties, I changed the "Type is" setting from "Automatic" to "Plain Paper".

Read other 1 answers
RELEVANCY SCORE 70.4

These two error msg boxes appear every time I log in to windows.. please help!!!

A:Script Error and Run-Time Error

Hi Hussey.

Easiest way for you would be to install CCleaner, and run. Once in there, go to Tools, and then Startup *See Screenshot*.

If you could dump a screenshot back here of your Startup entries, that would be great!

/ Crit.

Read other 1 answers
RELEVANCY SCORE 70.4

I have a game called Atc Simulator 2. It recently started to work, until I did something, which I don't know what it is, and the error called, "run-time error '340': Control Array Element 3 doesn't exist." pops up! Can anyone help? I have never heard of this error before and tried everything. When I searched up the error, all the results that I got were about website making and javascript. Nothing related to games. PLEASE HELP!!!!!! Thanks!
Game website: http://atcsimulator.com/new_info.asp
I have a Windows 8 64-bit. My DxDiag is attached.
 

A:Atc Simulator 2: run time error 340 Error!!! Help!!

Any Information would be appreciated!
 

Read other 2 answers
RELEVANCY SCORE 70.4

Hi this error message has been floating around for a long time.  I have yet to find a solution that works or that I can understand.  Why is the error message not resolved after 6 years?
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\SyncUP. Error:(The system cannot find the file specified. (0x80070002))

Read other answers
RELEVANCY SCORE 70

Lexmark C510 has an error code of 201 Rear Paper Jam as soon as I turn the printer on. There is NO paper anywhere in there. I opened the rear door, removed the fuser and looked. The fuser was replaced back in July and then had the 201 Rear Paper Jam shortly thereafter. I heard a loud noise at first, then it stopped printing. I went in rolled the rollers, and any flag sensor that I found by Googling about this. And it printed for about a week before the 201 error code appeared again. It hasn't worked since. I have read that others have experienced this error without any paper appearing anywhere. Does anyone know what might be causing this like others have and what else I can try to get rid of this error code?
 

A:Lexmark C510 error code 201 Rear Paper Jam

Three causes come to mind: 1) an actual paper jam, 2) a faulty sensor, 3) a faulty controller board
 

Read other 1 answers
RELEVANCY SCORE 69.6

My Pixma MP 760 recently needed new ink. I replaced the cartridges, did the basic service options, printed successfully and shut it down. When I next turned the printer on, I had an error message that stated" Rear Cover The paper is jammed. Clear the paper andpress OK".

I checked and there was a piece of paper in the rollers, and Igently removed it. It was not torn.

However, when I pressed "OK" themachine whirred while a different screen message "Wait for a while" appeared. But the original error message reappeared.

I doubled checked the entire machine, tried the "menu/ scan/copy/scan" and cleared the servicememory, to no avail.

I have tried unplugging it, waiting and restarted but all I get is the same error message and there is no paper jam. Called Canon and they were unable to help and the closest service depot is 600+ miles away..not an option.

Any suggestions would be gratefully received!
 

Read other answers
RELEVANCY SCORE 69.6

Hello. Bit of a pickle.

Our Epson Office B1100 will refuse to print - the paper will just stop at the print head, then the feed error light will start flashing. It will be ejected normally when the job is cancelled, without damage.

We're really , since we can't find an obstruction or anything obviously wrong.

Thank you for reading.
 

A:Epson Stylus Office B1100 - paper error, but no jamb

what op.system

http://esupport.epson-europe.com/Pr...GB&data=3TnmAJk3En1jaf82x8I5b7EzXhxv3+oz&tc=7
http://esupport.epson-europe.com/Pr...mAJk3En0Sc5zY50vxhAu81zMbsnmr4kHO2EodKbsU003D
 

Read other 1 answers
RELEVANCY SCORE 69.2

Hi Guys,
I am new i got one error that "access run time error 3061 too few parameters expected 1"

i write one query which is run in query build in access, i copied that query and paste in to VBA code but i got above error i dont know whats wrong

my query is

strgrQuery = "SELECT Count(Vendor_Resources.onsite_offshore) AS CountOfonsite_offshore FROM Vendor_Resources WHERE (((Vendor_Resources.[Vendor_Name]) = 'Sujeet') And ((Vendor_Resources.[Onsite_Offshore]) = 'Offshore')) GROUP BY Vendor_Resources.onsite_offshore;"
Set rs = db.OpenRecordset(strgrQuery, dbOpenSnapshot)
If (rs Is Nothing) Then
MsgBox "Sorry rs is Empty"
End If
 

A:Solved: Access Error access run time error 3061 too few parameters expected 1

Read other 7 answers
RELEVANCY SCORE 68.8

Symptom:
The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:
start

Read other answers
RELEVANCY SCORE 68.8

I'm running Windows 7 Pro on my Dell laptop. This laptop has been in storage and hasn't been turned on in a year. Originally, all I wanted to do was use iTunes. The problem:
 
It made me update it in order to use it, but I got an error.
 
I un-installed it and tried downloading a fresh copy and I get the following error:
After some Googling, I read that not having the latest Windows .NET framework might be the problem. Sounded reasonable so I fired up Windows Update but that gave me an error and wouldn't start checking for updates.
 
I managed to get it to check for updates, but now when it starts the process, I get the following:
I Googled the error code "8007007E" and tried a few things to try and fix it.
 
I downloaded the windowsupdatediagnostic.diagcab, found on Microsoft's site, here:http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
I tried resetting the Windows Update reset tool, using "MicrosoftFixit50202", found here:http://go.microsoft.com/?linkid=9665683
I download the system readiness tool, found here:https://www.microsoft.com/en-us/download/details.aspx?id=3132
I tried a clean boot.
 
I tried renaming the Windows Update Softwaredistribution folder.
 
None of this worked.
 
I ran the System File Checker tool (SFC.exe) and the results said I had bad files, but I don't know how to fix them. It generated a CBS log, which is too large for me to post (10MB) , so I've uploaded to dropbox,... Read more

A:Windows update error.. System File Checker integrity error..iTunes install error

Open the Command Prompt, copy and paste the commands below one at a time followed by pressing Enter after each command.
 
net stop wuauserv
 
rmdir /s %windir%\softwaredistribution\wuredir
 
net start wuauserv

Read other 9 answers
RELEVANCY SCORE 68.4

I had a very bizarre problem today. I downloaded about 50 .mpg files and put them into a folder on my desktop. I opened one of them, and it worked fine, but after that every time I even opened the folder that the files were in, only half of the thumbnails would appear and then it would tell me that I had a Visual C++ Runtime Error, from explorer.exe aborting. At the same time as this, windows would pop up a little message saying that my virtual memory was low. Later, it popped up a message saying that my Media Player needed to be reinstalled and that my Norton Antivirus needed to be reinstalled. Then it disabled my Norton Firewall and my Norton Antivirus. Lastly, I started getting error messages telling me that my soundcard needed to be configured to handle voice files, by enabling hardware acceleration. The only problem with that was that Windows would not let me access the advanced sound settings!

I am running Windows XP (all patches up to date), 256 MB Ram, 75 Gig HD - so I figured the "low" virtual memory had to be an error. I tried tripling the virual memory to 1GB and also tried letting Windows automatically set the virtual memory size, but neither of these fixed the problem. My immediate thought was that it was a virus or trojan, but Norton VirusScan, Swat-It Trojan Scanner, and System Suite VirusScan all failed to detect anything, and all of them have their definitions up to date.

I ran a Google search to see what other things I should try and none of the... Read more

Read other answers
RELEVANCY SCORE 68

I am continually getting the error "Run Time error 1004: Application defined or object defined error," each time a user clicks one of the cells within this excel file. It comes up as apparently a visual basic error. I've search other sites and unfortunately do not know enough about macros or excel formulas to know what to do next, so I thought I would post about it here. One user apparently has no trouble opening it while every other user has the same issue. Here is the debug code:

Private Sub Worksheet_Deactivate()

End Sub

Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
Cells.Interior.ColorIndex = -4142
Target.EntireRow.Interior.ColorIndex = 8
Target.EntireColumn.Interior.ColorIndex = 8
End Sub

The "Cells.Interior.ColorIndex = -4142" portion is highlighted in yellow, so I assume that's where the error is. From there, I'm not sure what to do to change it. Please let me know as soon as possible what direction I should take.

Thanks

A:run time error 1004 application defined or object defined error

To be honest...I would assume that the file is corrupt and try to replace it. All seemingly meaningful links on this error involve VBA coding and things that can go wrong with it...way overhead my head and out of my interest arena .

If it truly is a coding error (as seems implied), I would take it to the originator of that file, since it throws an error.

Very strange that e pluribus unum...manages to use it without problems .

Louis

Read other 1 answers
RELEVANCY SCORE 67.6

I am trying to take back up of the files from my Laptop.
I used it for 2-3 days. 
Stages followed. 
I connected my laptop with a hard disk.
1. Welcome
2. Factory recovery media. After starting the application, following error poped up:an error occurred while creating the factory recovery media dell
3. Data back up to hard disk. No issues for this point
4. Finish

A:New laptop 5558 Windows 8.1 Dell recovery and Back up, Error: an error occurred while creating the factory recovery media dell

Hi,
Thank you for writing to us!
Kindly click on the following link:
https://www.dell.com/support/home/us/en/04/media
This link will give all the information as to how you can use Dell backup and recovery and if there are any other issues with the same.
Thanks
Robin

Read other 1 answers
RELEVANCY SCORE 67.2

I am getting a blue screen after I attempt to login to a pc.

Verification error in wmiacpi.sys (WMD driver error) 20e

wmiacpsi.sys = 152f at B9BAB852F

I have run the Dell diagnostic and everything passed.
This is a Dell laptop latitude D531. Dell just replaced the hard drive about 10 days ago. It worked fine until Monday.

Any any what this may be?

A:Blue Screen Io Error. Verification Error In Wmiacpi.sys (wmd Driver Error) 20e

Are you sure of the spelling of the 2nd file name? If so, Google doesn't give any results for it - which is suspicious.The first file name ( wmiacpi.sys ) is a Windows file that's used to help manage the ACPI settings in your system. http://www.bleepingcomputer.com/filedb/wmiacpi.sys-7763.htmlA BSOD error will usually point to the file that the error occured in, but this may not be the source of the error. Here's a link on how to find more info about the BSOD message: http://www.bleepingcomputer.com/forums/top...tml#entry409491Once you locate the .dmp files for the event, you can use this link to generate an analysis of the dump for us to have a look at ( http://forums.majorgeeks.com/showthread.php?t=35246 )

Read other 6 answers
RELEVANCY SCORE 67.2

Ive just bought some new memory (TWIN2X4096-8500C5C G), the new memory doesnt seem to work unless I only add one stick, and even with that I get blue screen errors.

So from reading a few pages on teh internet I put my old memory back in, and ran windows driver verifier. Upon restarting I got and keep getting teh following BSOD.

IO SYSTEM VERIFICATION ERROR in wmiacpi.sys (WDM driver error 20e)

[wmiacpi.sys+152f at B7C5C52F]

A:Blue Screen IO Error. Verification Error In Wmiacpi.sys (WMD Driver Error 20e)

If the system ran fine...before you added RAM...then you need to see if the new RAM (by itself)...works.The new RAM may not be compatible with your old RAM, in which case the system will run fine with one or the other...but not both.The Driver Verifier tool is tricky to use, I would disregard that effort...for the moment.Remove your old RAM...put the new RAM in...see if the system works properly.FWIW: http://www.bleepingcomputer.com/forums/t/153175/blue-screen-io-error-verification-error-in-wmiacpisys-wmd-driver-error-20e/Louis

Read other 14 answers
RELEVANCY SCORE 67.2

The error onpage of Dell Start Page Trying to edit weather and the error message shows up. the error message is as follow: Line 2 Chasr 316 Error "HTML" is null osr not an object Code O URL HTTP:www google.com/IG/dell?HL=en&client=Del Would you send me an e-mail with the answer, please.

Read other answers
RELEVANCY SCORE 66

I have got error 0x8007371 when I tried to install .netframework 3.5 which was required to install windows essentials.
I ran DISM command to fix 0x80073712 error, and received another error message in the command prompt: Error 14098 Component store has been corrupted.
THen I ran sfc/scannow which gave another error "An error occured during installation of assembly component".
This is such a bul grab, can someone help
Thankz

Read other answers
RELEVANCY SCORE 66

Hey guys, having trouble getting XP to Update, well it did Update MSRT and failed on Flash as usual because I removed Flash.  The only thing I can think of that I changed was my Router settings to more aggressive, but it has not affected Windows 7?
 
This is the ms document on it: https://support.microsoft.com/en-us/kb/883820
 
I tried all the stuff they say there but none works.  I have SP3.
 
I am also being sent to this site, which don't look like it should.
http://windowsupdate.microsoft.com/
 
Thanks pcpunk

A:HTTP Error 500 - Internal Server Error, Error 0x8ddd0010

All good now!

Read other 1 answers
RELEVANCY SCORE 64

it happens time to time and is usually when i open adobe photoshop,aftereffects. Also i cannot seem to open any kind of games on my new computer like fifa 13 ,nfs etc. I have an i7 3770 and 8 gb ddr3 corsair RAM with 1 tb hdd and motherboard is msi B75MA-P45 and geforce gtx560 for graphics card. my FSB: DRAM reads 1:6 on cpuz, does this have anything to do with the blue screen ? should i do anything in the BIOS settings ?

A:New built computer bsod's time to time.stop error 0x000000a

Hello Sonam.

Nice configuration. But it is the display driver that caused here.

Code:
fffff880`0a48fb88 fffff880`0ffb47c9Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0xbd7c9
What I have seen, the October edition is somehow problematic on a lot of machines. So I would suggest you to do what I did myself.....
Uninstall nVidia display driver using Driver Fusion , and then install an older version which was stable there.

And, you should install Service Pack 1.

Let us know the results.

Read other 4 answers
RELEVANCY SCORE 64

Hi there! I'm running windows xp home on an hp pavilion a400n, although I'm not sure that matters. I also use Firefox as my default browser.

I've downloaded a Google gadget, the calendar, to my desktop. I use the google calendar as my primary appointment book.

The problem is that the time in my calendar gadget and the time in my actual calendar aren't matching. I enter an appointment into my calendar, and then refresh my calendar gadget to see the updates, and the times on the gadget are on hour earlier than the actual calendar.

In trying to figure out what's happening, I also noticed that the timestamps on my messages, incoming and outgoing, are the same time frame off. When a message comes in or goes out, it immediately shows that it's an hour old.

I went in and made sure the operating system clock and the google gadget clock are on the same time and showing the same DST settings. But I'm still having the same problem.

Is there another clock setting I'm missing?

Help, please!

cwazylady
 

Read other answers
RELEVANCY SCORE 63.6

Just got a new computer and am trying to install my Philips Mini HiFi sytem. Contacted their support centre and they don't know what to do! The stereo system simply plugs into a usb port and plays your audio through their system. The only difference between the system it worked on a few days ago and now is that I am running Windows Professional x64.

The problem:

three things to install:

1. the Philips drivers. Philips support got me to download their drivers for Win XP.

When I install this the error rec'd is: "Install 2.15 setup. While installing drivers Plug and Play error detected. Please reboot and try again". I reboot and try again, same thing.

2. The program "Sound Agent" to run the show. When I install the Sound Agent program, the error rec'd is: "VDI32.exe has encountered a problem and needs to close".

3. MusicMatch to channel the audio through to it. (Seems ok but tells me it's out of date - no biggie I can deal with that).

In Device Manager there is "Unknown Device" listed under System Devices shown to be not installed (the yellow exlamation mark through it). When I try to Update Driver it says, "Cannot Install this hardware. The hardware was not installed because the Wizard cannot find the necessary software".

Finally, whenever I reboot I get the error message: "The QVE bus driver is not detected. Reinstall the Qsound Virtual Audio Devices Bus Enumerator driver".

I have reform... Read more

A:A Real Tough One. PnP error, VDI32.exe error and a QVE error. Help Please

Your link is not working, but many things don't have 64 bit drivers. Did the drivers say for XP or specifically for 64 bit?
 

Read other 2 answers