Over 1 million tech questions and answers.

"Windows not installed on the drive from which it boots"

Q: "Windows not installed on the drive from which it boots"

Hi, I'm trying to fully encrypt with Truecrypt the main OS drive but it halts with the following message:
"Windows does not appear to be installed on the drive from which it boots"
So this is my setup:
- I have two physical drives, an SSD drive where Windows 7x64 is installed listed as "C" drive (Disk 0), and a 2nd internal HDD, listed as "E" drive (Disk 1).
- When I go to Disk Management in Control Panel/Administrative Tools/Computer Management I find what seems to be the culprit preventing Truecrypt from continuing encryption. The C drive is listed as "Boot" drive but not "System" drive, instead drive E is listed as "System" as seen in the screenshot:

I also noticed that "bootmgr" is located in the E drive and not in the C drive.
So how can I make the boot drive C also be the System drive?

Preferred Solution: "Windows not installed on the drive from which it boots"

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: "Windows not installed on the drive from which it boots"

Well, I solved the issue by disconnecting the 2nd drive, doing a startup repair, and then reconnecting the E drive back. The bootmgr file still shows in the E drive's root directory, Can I safely delete it? Thanks.

Read other 9 answers

My external Seagate drive is apparently "dirty" and windows automatically checks it every time i boot up with it attached to the usb port. It is actually pretty annoying. The only way around it that I found is actually unplugging it before I boot up and plugging it back in after windows starts.

Every time the check says there are no issues. The drive works fine and I am able to use the drive as if nothing is wrong.

Does anyone know whow to get rid of the check during Windows startup? How can I make my drive "clean" again? Thanks

EDIT: I have Windows XP sp3 btw

A:External hard drive is "dirty" and windows runs a check every time computer boots up

You may need to run a manual chkdsk /f to clear it. Try this
> Unplug the drive then boot up then plug it back in. Determine its drive letter
> Start->Run, enter cmd to open a command prompt
> Enter chkdsk x: /f (except use the correct drive letter, not x)

/f option may take loong time complete (especially if large hard drive.. i.e hours) but when it's done i believe it should clear the dirty bit for you

Read other 1 answers

Windows 7 Pro, 64-bit, boots up and runs fine as long as "Windows Search" is NOT checked in "Services".

When I run msconfig in the Services Tab, that is the Windows Search checkbox that I'm talking about.

If the box is checked, computer will start up, allow me to click on my user icon and load everything as if it's ready to go. The cursor moves with the mouse but does not respond to mouse clicks, also the computer does not response to the keyboard. If I click the start button, I get the spinning round wait icon (or whatever that is called). It also runs fine in Safe Mode.
I tried sfc.exe /scannow I have all the latest windows updates. I have run several different anti-virus, anti-malware programs. I ran chkdsk. Do I need Windows Search checked in Services? What does Window Search do? Is that where you can search from the Start Button area?

A:boots up then freezes when "Windows Search" is checked in "Services"

Which flag did you use with chkdsk - /F ?? My first guess is that Search is trying to index and snagging on something - either a file system problem or bad disk sectors. The /F flag deals with the filesystem. If you haven't tried /R, for sectors, do so, but only after backing up important data, and perhaps taking a system image if the system's current state is valuable to you. I prefer to run chkdsk from a WinPE/RE boot disk so I can study its output at leisure.

Read other 9 answers

I want to encrypt my hard drive with TrueCrypt, but it comes up with an error saying that "Windows is not installed on the drive from which it boots". I just reinstalled Windows, so it wouldn't be a huge loss to install it again in the same day, but when I install it, how do I make Windows and the boot drive the same? When it came up with the partition prompt, I formatted the partitions (there were two) and then deleted the partitions and made it all unallocated space. Should I put one partition on first? Thanks in advance!

Read other answers

I want to encrypt my hard drive with TrueCrypt, but it comes up with an error saying that "Windows is not installed on the drive from which it boots". I just reinstalled Windows 7, so it wouldn't be a huge loss to install it again in the same day, but when I install it, how do I make Windows install on the boot drive? When it came up with the partition prompt, I formatted the partitions (there were two) and then deleted the partitions and made it all unallocated space. Should I put one partition on first? Thanks in advance!

A:How do I "install Windows on the drive from which it boots"?

You may want to check if you have a hidden 200MB partition that Windows 7 will create if installed onto a clean un-partitioned drive - it sounds as if this may be the case.

If this is so then creating a primary partition and installing windows 7 there should get passed the issue you are seeing.

there are several threads relating to the 200MB partition on the forums if you need further information

Read other 6 answers

Hello all,

I recently bought a new CPU for my computer (I broke the old one because I tried to replace my old heat sink with a new one and the sink had created a vacuum and pulled the old CPU from the MOBO without it unlocking.

So, I can boot everything up. The "new" CPU is an AMD Athlon 64 X2 4800+. The old was similar but slower, no other major difference. I can boot BIOS, I can boot Win7. But then, the comp shuts down and reboots Win7. Sometimes the BIOS shuts down. I watched the CPU Temp for awhile and it reached nigh on 88C. I thought the comp was shutting down to protect that, but it was really rebooting.

Then I got a blue message screen but it reboots too fast too get too much info off of it. However, I got the idea that it realized that the "new" hardware is the problem.

So..... how do I get Win 7 to "recognize" the new CPU...(the BIOS recognizes it no prob.)?

Thank you,

A:"New" CPU installed Win 7 Boots then Comp shuts down

Hello Thorstein. Welcome to the Forum.

A few ideas:

Can you be sure you did not damage the CPU socket or the retaining mechanism?

Regardless of that, anytime you change a processor you should always perform a Clear CMOS, or CLR-RTC to refresh the BIOS. On a K9N-Platinum board that is done using the SW2 button (see below).

You could change the setting to automatically reboot upon a Blue Screen event: Start > Control Panel > System > Advanced System Settings > Startup & Recovery > And under "System Failure", uncheck "Automatically Restart". Then you can read the error code.

You can also zip-up, attach, and post the minidump file in the Crashes and Debugging Forum. But I think the cause could be pretty obvious.

Read other 9 answers

I have the same problem I just read about here. Suddenly, when I click on "Start" there is no response. When I click on the "imported favorites" in the tool bar, there is no response. Sometimes, if I first click into my AOL E Mail account,
then I can reach the favorites list, one time. After it's closed, it won't display again unless I re-boot.

Read other answers

I have a Gateway SX2370-UR13 with windows 8.0 installed, it has been nothing but problem after problem, from the first day I got it. I tried the "free" upgrade to windows 8.1 & that made things worse. I had to roll back to 8.0. Things have
gotten so bad that now the System restore, Refresh, & Reset options fail to function,(along with the Task manager, Control Panel, Advanced startup options & nearly everything else), giving me a message about needing to unlock the drive. This happens
with the USB recovery media , the repair disk(CD?DVD) , & the Automatic repair.

 How do I fix this ?

I'm ready to go back to the beginning factory settings but cannot find a workable fix.  How do I even format the entire drive? So I can try the recovery media again for a "clean install?"

Read other answers

Hello. I've joined a couple or so weeks ago but never posted. So I think this'll gonna be my first post... a first post regarding a malevolent problem happening for weeks on end.

I dunno if I have malware, spyware or virus in my system but I just know there's a bit of a problem. My floppy drive "boots"--i.e. activates itself with the light on along with the signature grating sound--whenever I click on my user (or any) account in the Windows welcome screen. And then when I'm working on something, it would just happen again at random. I've used online scanners, downloaded the Kaspersky trial version, used Avast home edition and even employed rootkit cleaners to no avail. I scanned my computer using HijackThis and this is my log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:44:48 AM, on 5/15/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
D:\Program Files\Ahead\InCD\InCDsrv.exe
D:\Program Files\Sygate\SPF\smc.exe
D:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
D:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
D:\Program Files\Alwil Software\Avast4\ashServ.exe
D:\Program Files\Speed Disk\nopdb... Read more

Read other answers

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

Read other 16 answers

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".

Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":

The second picture is of the properties window of the first .mp3 in the list above:

I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:

Also, the properties window correctly shows the duration also:

I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

Read other 8 answers

I just installed a new 60gb hard drive as a back up to put my movie files on,it installed fine and it works fine but i get "windows milenium emergancy boot" when i boot the system up .I don"t know if this error is serious but I do know that the system seems less stable in this boot mode..can someone please help? thanx

A:after installing new "hard drive" it starts with "windows emergency boot"

closing duplicate, view this thread

Read other 1 answers


I'm using Windows 10 th2-10511 x64 and when I install EMET 5.5 final the EMET system service is installed with the "delayed start" flag and the service and never starts after a reboot. The same thing happened with the beta version, I didn't notice
it until the final was released. This issue doesn't occurs with EMET 5.2.
I switched the service back to the normal Automatic (not delayed) start, and everything seems to be working again. I was wondering if anyone else experienced this issue?

Also, can someone enlighten me about this warning message "DEP/ASLR Policy settings are ineffective by default; see user's guide on how to enable them". It appears when I enable the DEP/ASLR EMET GPO. I couldn't find any reference to this warning
message in the user guide. DEP seems to be enabled, I have no idea how to check for ALSR other than Process hacker that shows ASLR as N/A.

Read other answers

I have a Xp Home installed in a logical partition. It was booted originally by a Dos primary partition operated as the "C" drive.

What I have done is to move the Xp around in the logical partitions in the same disk or to another disk. It can be assigned to a different drive letter if it is not operating. However if I boot this Xp it will seize the drive "D" back again no matter where it is or how many other partitions between itself and the boot volume.

I finally moved it to a primary partition and nuked all the other partitions it could recognize. The boot loader has been re-configured to run Xp as the sole operating system. It now operates happily as a "D" drive without a "C" in the system.

Just wonder can the Drive letter be changed after installation or is there a lot of work involved. Not particularly bother with it as my prime objective is to see if I could move the M$ Windows between partitions and disks within the same computer. So far everything works except this stuborn drive letter business.

A:Can a Win Xp installed as a "D" drive be operated as a "C" drive?

saikee said:

Just wonder can the Drive letter be changed after installation or is there a lot of work involved.Click to expand...

Lots of work in the registry...

Read other 2 answers

I have a domain joined Surface Pro 2 running 8.1 Pro.
The following GPO settings are in place:

* Assign a default domain for logon

* Do not display last logged on user

* Disable logging in with Microsoft accounts - uses the following registry setting - MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\NoConnectedUser - Value = 3

The end goal is for the machine to boot to the login screen that just displays empty user name and password fields
The problem at the moment is that instead of doing that, the client boots to a screen where the only option is to click on "Other user". Only then does the login screen I want, where they enter their username and password in full, actually appear.
These Surface Pro 2's are to be used by small children, and have the "Other User" screen appear is confusing for them, as well as being very annoying for me. It's completely unnecessary.
I've searched all over the 'net looking for an easy way to get the client to boot straight to the standard domain joined log in screen, but every time it just boots to this "Other User" screen that has to be clicked on in order to get the correct
login screen to come up.
Is there any way I can get this to boot straight to the login screen I want? 

Read other answers

Hi guys. I changed the RAM on my system recently, as one of the old sticks was giving problems. It would fail to boot intermittently, and according to the LED light on my motherboard, it was supposed to be a memory issue. So I took out the old RAM and put in the new RAM in the other two slots, not the slots that the old RAM were in. Previously I was using 2 x 2GB, but now using 2 X 4GB.

Ever since that, I've been noticing this message at boot. It says "Bank interleaving requested, but not enabled". And after that it says clearing NVRAM, and Windows boots fine after that. Why is this message appearing, and are there any implications? I went into BIOS, and under Clear NVRAM, it's disabled, so is the Clearing nvram message even doing anything? Or does the option reset to disabled everytime it boots? Thanks guys.

P.S : Btw, I'm using another system, so the system specs in my profile are not accurate. The motherboard is BioStar Ta 790GX A3+, CPU is AMD Phenom II x4 620 2.6 GHz. I'm using Kingston DDR3 1333 RAM.

A:"Bank interleaving requested, but not enabled", but Windows boots fine

Anyone? any ideas?

Read other 5 answers

I have a windows XP Home computer that goes through the boot process fine until the very end, right when the windows screen shoudl load a message pops up that says "Entering Power Save Mode" and the computer is unusable. I have to do a manual reboot. I CAN get the computer to boot fine while in Safe Mode (but not in VGA mode), I turned off all the power save options, I tried a new monitor, new cable and replaced the battery. My next move is the video driver card but before I do that anyone else have other ideas? It is a Dell XPS 410 computer.

A:Solved: Windows XP Boots in "Power Save Mode"

Read other 8 answers

I'm sure this isn't a new problem or new post asking about that. But I still make this post because every solution I tried didn't work.

Symptom: My Windows 7 64bit boots slowly with a long Welcome screen, then a black screen with cursor for about 5 - 10 seconds and the wallpaper with icons appears.
Video: YouTube
System infomation: Asus K55A

Intel 3230 2.60 Ghz, Intel HD 4000

Not many softwares, Office 2010 is the biggest software I installed

Used solutions:

- Remove start-up programs

- Update drivers and windows system, BIOS

- Run cleaning tool for partition C

- Run defragment tool
- Scan virus, malware with Panda and MBAM

To make sure this is a software problem related to system, I install another Windows 7 on the same laptop, different partition. It has many programs (Photoshop, VirtualBox) taking more space than the first Windows 7 . This Windows boots much faster without disabling startup programs and services. Also It hasn't been updated regularly, even drivers. This windows just has drivers from 2014.

It seems silly, but I have to say that can be explained. To check what happens in booting these two windows, I use boot log.

Bootlog in my first Windows 7 (Slow boot), 461 kb txt file, in the seconds Windows (Fast boot), 18.3 kb

In bootlog of the slow booting OS, many lines say "Did not load driver....", in fast-booting os, just a little

So now I think the root cause is drivers which are loaded in booting proccess. And notice that, I have re-install... Read more

Read other answers

Today I was installing a new keyboard on a Windows XP Professional machine. I installed the software for the keyboard (DYNEX). Shut down the computer. Connected the keyboard (via USB through USB hub). Restarted the computer. When I restarted, the computer it said it found a new USB device. It never when through the steps of installing the USB keyboard, it just kept saying new USB hardware found. I then restarted the computer. After that restart, the computer would get to the point of the Windows XP splash screen and then the computer would reboot on it's own. Then a screen would come up asking whether I wanted to start in Safe Mode, Safe Mode with network, Last Known Good Configuration, or start Windows Normally.

If I choose Safe mode with network, Last Known Good... or start Windows normally then Windows XP will not load it gets halfway and reboot. The only way I can get the computer to load Windows is by choosing Safe Mode. I've booted to safe mode a couple times and did some system restores but I am still unable to load Windows XP unless I choose safe mode.

I have tried disconnecting the keyboard also and that doesn't help.

Help, what should I do to get Windows XP running again? Thanks

A:Windows XP Won't Boot (Only Boots to "Safe Mode")

Read other 6 answers

Today I tried to burn a disk of mp3 files as I've done many times before. When I tried to copy the files from the C drive to the D (CD/DVD drive), Windows Explorer only would allow "Move," not "Copy". I tried to copy with CTRL+Right Click and that didn't work either - when I hover over the icon for the D drive it says "Move."

I was able to copy and burn a disk (in CD format) with Windows Media Player, and the CD drive works fine for playback. Also, when I plug in an external hard drive Windows Explorer allows copy of files to the external hard drive.

It's only when I try to copy files to the CD drive that I encounter this problem.

No other recent changes have been made to the computer.

Any idea, and thanks very much!

A:Windows Explorer only allows "Move", not "Copy" to CD/DVD drive

try selecting the files--then right click and select 'SEND TO' CD/DVD--it shouldn't be possible to 'copy' to a blank CD/DVD as it will be unformatted.

'send to' the choose burn

Read other 4 answers

This is not really a problem, more like a nerdy technical question, since I like being informed about the goings-on in my PC. I hope I posted it in the right section, since IMVU would probably fall more under "game" than anything else.

I have always been curious as to why would the developers of the chat client IMVU decide to have the program install within C:\Users\[username]\AppData\Roaming\IMVUClient (previous versions did so under "Documents and Settings") instead of "Program Files" or "Program Files (x86)" on Windows... I am also curious if this unconventional choice could potentially make my PC vulnerable to attacks.

Now, the program works fine AFAIK, but I'm puzzled by this. I'm the kind of user who likes having the choice of installing apps in a drive other than C: (to free space in C:, for portability, etc.), and who gets nervous when apps do not install or behave the way that I'm used to.

I was told by someone more knowledgeable than me that it was probably a lazy way to get around administrative install rights in Windows Vista and Windows 7. He also added that the cache data of the program shouldn't be in Roaming when there is no upper limit or even default size set on it.

And yes, this has been asked on their forums, but no staff member ever answered it (only a forum mod, who didn't have a clue).

Any ideas? Or am I being overly paranoid?


A:IMVU Installed in "AppData\Roaming" instead of "Program Files"

Read other 7 answers

I recently bought a new SSD for my 128 Gb Dell XPS 13 (9350), but now whenever I try to boot it up it always gives me the error "Hard Drive - Not Installed". I am trying to install a clean SSD, because I feel that my old one (the one that came with it) is filled with too much junk to transfer over. Could somebody please help me fix this problem?
The SSD I bought:

A:Dell XPS 13 (9350) after SSD change it says "Hard Drive - Not Installed" when I boot it up

Since you purchased an PCIe NVMe drive, have you changed the SATA controller to AHCI in the Bios?
Do you have a 2.5 inch SATA drive?
I am not aware of the driver situation with the 9350 but if you want to use the PCIe version, the Bios has to provide the driver during boot.  If it does not at the present time, it may need a Bios update to the latest..  But I am not familiar with that particular system.

Read other 1 answers

As stated, my system runs fine but I wanted to try the F12 diagnostics to see how it worked.  To my surprise it shows a problem was found and the Hard Drive - not installed.
Would this be a normal situation when running a PCIe drive using a NVMe driver?
I am wondering what the Support Assistant would do if it popped up for some reason.  If it can't see the M.2 drive, would it give me incorrect responses?
Should I disable Support Assistant?
System is two week old XPS 13 9365 2-in-1, running a Samsung 960 Pro in PCIe mode using the Samsung NVMe driver, running without problems..

Read other answers

I have a Dell XPS 13 9360, bought in 11/2016, still under warranty.
Windows 10 Home, all updates installed.
Every once in a while (irregular intervals, once a week to once a month), the laptop freezes, then restarts, enters BIOS, and shows a message "Hard Drive not Installed", then there is a status bar showing the diagnostics is being performed, and then the laptop shuts off. After I turn it on again, Windows boots and everything works normally. Otherwise, no problems with the laptop. I don't see any clear association between freezes and what kind of work is being performed or software being run. Sometime happens during heavy load, sometimes on idle.
Things seem to get better after every BIOS update, it doesn't happen for several weeks, but then starts again. Do you think this is just a BIOS problem that may get solved eventually by updates, or is it a hardware issue? Should I contact support and attempt to fix? I imagine it would be very difficult to troubleshoot because the problem is very intermittent. Is this a common problem for other 9360 users?

Read other answers

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

Read other answers

Purchased my XPS 15 9560 with i7-7700HQ, 16GB RAM, 512GB NVMe SSD, GTX1050 4GB, and 1080P display back in June 2017. Since installing the 1.5.0 BIOS update, I received a DPC_WATCHDOG_VIOLATION bluescreen, and now my laptop no longer boots.
Upon powering on the laptop, I'll usually see the Dell POST screen, then it will either go black for an extended period of time before shutting down on its' own, or boot into ePSA SupportAssist Diagnostics and run through the quick troubleshooting tests. These tests will either result in a "Hard Drive - Not Installed" error, or show all hardware passing, but "No boot devices found" before shutting down.
As a computer technician with 10+ years experience in the field, I've already taken the appropriate steps to fully remove all power from the laptop, including unplugging the battery, and reseating the RAM and NVMe SSD in their sockets. The laptop still fails to boot or detect the drive on a regular basis.
Very occasionally I'll see the drive detected in the F12 Boot Options screen, as it shows up as a SanDisk A400 SSD, however, the system still locks up on a black screen should I choose to try to boot from it. I can get it to UEFI boot from a Windows 10 Installation USB, or from the Recovery USB I made with Dell's recovery tools, but only if I boot with the NVMe SSD unplugged from the motherboard. Otherwise the system hangs upon trying to boot.
I've opened up a line of support on the... Read more

A:XPS 15 9560 "No Hard Drive Installed" after 1.5.0 BIOS

In the same situation as you. Kept showing hard drive not installed. Got my xps15 two months ago, please let me know if you find a solution! Thanks!

Read other 1 answers

I just tried to switch hard drives between my EMachine T6528 to my Dell Dimension 8400. I thought I did it correctly, but it is giving me the message "No Boot Device Available". Can you direct me in what to do?

A:"No boot device available" (Just installed new hard drive)

Make sure that the device to which you are trying to boot (the optical drive?) is recognized by the BIOS as bootable and enabled and is in the boot order list.

Read other 2 answers

I have Windows XP Pro., sp3.

When you install a new program, what determines where it is listed: All Users>Start Menu>Programs or "user name">Start Menu>Programs?


A:What determines if a program is installed under "All Users" or "user name"?

Usually some of the programs give you an option to install it under your user name or for all users during the setup process. So say if I was installing (CVTae) a resume programming on a Windows XP computer it will after the installation process ask me if I want to install it as all users (so it will show up on the all users start menu so everyone can see it) or just for me. That's where you can decide for yourself where you want to install it.

'So usually it's the user's choice of where it's listed in most cases, but certainly not in all cases.

Hope that helps mate.

Read other 1 answers

I have had my Dell Inspiron 17 5758 Laptop since around Feb 10, 2015 so almost 2 years now.  The lap top was working fine up until mid day yesterday now it is stuck in the "preparing sutomatic repair" loop and ends with either a black screen, saying my laptop didnt start correctly or that it couldnt repair my laptop and when i try to run a diagnostic on it it says that my hard drive is not installed. Also now the hard drove is simply not running. Is this because the hard drive as failed? Its in transit a lot and occasionnaly hits a bumps on the seat of my car when driving.
Also if i have to buy a new hard drive how would i install windows 10 on my laptop again? Will i have to pay for it again?

Read other answers

I had Vista 64 bit on one hard drive (C). When I upgraded to Win 7 I had to do a new install as I went from Vista 64 bit Home Premium to Win 7 64 bit Professional. That wasn't a problem as I had a new 1TB drive formatted and ready to use for Win 7. However, when I installed Win 7 it installed on the new hard drive but set it up as "E". Now, I have a dual boot with Win 7 and Vista but Win 7 is drive "E". If I remove the dual boot and physically disconnect the Vista drive, can I rename the Win 7 to "C" and will all the installed software recognize "C" instead of the current "E"? I don't need the old Vista 64 bit anymore.

Obviously there is no difference on what the drive letter is, just wanted to get back to the conventional "C" drive without having to do a complete new install, now that I have everything setup and working in Win 7.

A:Win 7 installed on new drive as "E" Can I change?

You can but it has potential problems that may arise.

There is a key you can edit in the registry.

This is for XP but I've already used it fine for Windows 7 too.

Change System Drive Letter in Windows XP

In their example, substitute D: with your E:, instead.

Read other 9 answers

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

Read other answers

Another question/puzzle. Windows 8.1 Enterprise.

I clean installed W8.1 three days ago, and the first thing I did was bring it up to date with all the offered updates. All installed successfully and I thought no more of it. At some point after this I made a system image backup, which today I have restored to. When I now look at the "classic" windows update screen it says I have never checked for updates and none are installed. Forcing a check for updates brings only two up as can be seen in the pictures. If I go to "view installed updates" then there is a lot of stuff in there, whih I assume could be the previously installed original batch.
I'm guessing this is normal behaviour but it seems slightly odd (the on screen messages at least)

A:No update history says "never checked" & "never installed"

Not odd... Considering that is a "clean install"(albeit with integrated updates) - thus no update history (file) exists.

Read other 5 answers

Hey Guys,

I needed*to install SQL Server 2014 Management Studio for a database course that I'm taking. I wasn't able to load the database, so I played around with the C drive permissions and I ended up losing all access to my C drive.*If I try to*go anywhere like Acer Recovery Management or C: Security Tab or UAC, I get "access is denied".*I have my Windows 8 recovery USB and I played around in the command prompt but ended up making it worse. (Before I could still log on and use Chrome) but now I'm getting "\EFI\Microsoft\Boot\BCD - You'll need to use Recovery tools" It*messed up when I tried this command "bcdboot c:\Windows /l en-us /s x: /f ALL" I tried all the other commands from this website:


except for the paid software:

Easy Recovery Essentials ?

but haven't bought it yet. I know*it can be fixed*from the command prompt but I'm not sure how. When I try "Reset*/ Refresh your PC" from the recovery media, I still get "The drive where windows is installed is locked. Unlock the drive and try again"*I have all my files saved on Google drive so I don't mind losing anything. What can you suggest?

Read other answers

How to remove the "Authenticated Users" "Create Folders" permission from the root of the C Drive via command-line?
I know this question has been asked many times before, but nothing works for us!
We tried the following:
Take ownership: I cannot take ownership using the Administrator account (local and Domain Admin accounts) of the root C:. Error Access Denied
Cuurent root C: owner is TrustedInstaller and acnnot be changed.
We cannot change or remove the Create Folders permission of the Authenticated Users of the root C: . Error Access Denied.
Drive C: is hidden via GPO, but many users can enter it from the File-Explorer and create folders in the root C:.
We do not want -for many reasons- to Block/ Prevent Access to C: via GPO.
We also tried to run cacls and/or icacls under the system-account (PSEXEC -i -s -d CMD). Error Access Denied.
icacls C:\ /deny *S-1-5-11:(NP)(AD)
Error Access Denied.
icacls C:\ /remove:g *S-1-5-11
Error Access Denied.
cacls c:\ /e /c /R "Authenticated Users"
Error Access Denied.
Also using GPO "Computer Configuration\Security Settings\Restricted Groups ..." does not work!
Now we have this issue on over 450 pc's on our network. Nothing work. Please help! How to remove the "Authenticated Users" "Create Folders" permission from the root of the C: Drive on command-line?


Read other answers

This is a new thread. The original problem had to do with Windows Defender and is described here:
Windows Defender Error

Now I'm trying to do a refresh from my CD and get the message:"The drive where windows is installed is locked. Unlock the drive and try again". Currently, I'm unable to boot in any mode (safe, etc) and can only get a command prompt.

Any help is appreciated.

A:Refresh problems"The drive where windows is installed is l

Windows Defender Error

Originally Posted by Brink

If you mean refreshing Windows 8, then be sure to back up anything that you do not want to lose first to be safe. After a refresh, you would need to reinstall all desktop programs.

Did you backup?

Is this a Notebook Pre-installed with Windows 8?

Read other 7 answers

As this question was never answered I'll post it verbatim with my own comments below,
See original post here;

In all operating systems up to Vista, the flash drive's "active" light turns off when I go through the disconnect procedure; but, in Vista, it doesn't. I have traditionally used this as part of my explanation to others (and a convenience to myself) about when to not to remove the flash drive from its USB port.

This is a problem common to all Vista systems I've seen.

Why does the light not turn off in Vista?

And, is there an easy way to correct this?

Additional information: I have eliminated this problem being hardware-related. I have loaded Vista onto one of my systems here that previously had Windows 2000, then XP on it and it was only with the loading of Vista that the problem developed on this system. Just to be absolutely sure, I did a restore of a previous image of Windows 2000 and the problem went away again. I put Vista back on and the problem came back. So, this is strictly a Vista problem.Click to expand...

I have had the same problem with every Vista system I have used and every flash drive (note this means SSD NAND flash not HDD's or card adapters). AS the last discussion degraded into useless questions about hardware and other OS's let's get a confirmation that someone out there actually has a flash drive that turns its activ... Read more

A:Flash drive's "active" light doesn't turn off in Vista when "safely removed"

have done a litte research and testing in my lab on several machines and have confirmd the problem. What it seems to indicate to me is that, in Vista, the light simply indicates power, not data transfer. Whenever I am transferring data, the light blinks.

While I have never actually tested it, I do not belive that the "safely remove" feature actually kills all power to the USB port in XP. If that is the case, then there is really no danger as long as vista has acknowledged the disconnect and knows not to try to write data to the drive.

Read other 2 answers

After privacy protection installed itself I no longer have a desktop. The task bar is still on the screen as well as the start menu. But when I click on the start menu there is nothing on it. The only programs that are running are " privacy protection", "windows security center", and "XP anti-virus 2012". All three of these are running completely by themselves and I never installed or downloaded any of them. I cannot get on the internet or do anything with my computer. I know that privacy protection and XP anti-virus 2012 are fake virus protection but when my computer was still somewhat functional, these programs did not allow me to run anything which made it hard to fight it off. I have some really important stuff on my computer and I would hate to lose it all.

Read other answers

When I launch WU form the std start menu shortcut, it launches wuapp.exe and just hangs. I have to terminate the process in task manager. Additional launches = additional hung processes.

Shortcut target: %windir%\system32\wuapp.exe startmenu
Starts in: %windir%\system32\

The same condition occurs if I try to launch wuapp.exe directly from %windir%\system32\
Yesterday, I checked the Effective permissions for my user on wuapp.exe = full control
Today, after running the Windows WU Troubleshooter and WU MS Fixit, the permissions = read, read & execute.

The issue is twofold. The standard WU shortcut "hangs" but Control Panel WU does not hang, until I try to view installed updates (viewing history seems to be ok). I have to terminate the process in Task Manager once I try to view installed updates.

As a workaround, I created a shortcut to Control Panel WU - this allows me to check for and apply updates.

Shortcut target: Control Panel\All Control Panel Items\Windows Update

A few things that might have caused this - recent activity, but just guessing I installed Advanced Uninstaller Pro and played with it, but did not apply anything it suggested. One thing I tried was duplicate files - eventually killing it due to time (lots of dups, lots of files).
Uninstalled said: Some files must be manually deleted without indicating which files. A serch for the program named turned up a few folders, deleted them and ran cCleaner (nothing in registy associated with the... Read more

A:Windows update "hang" - menu shortcut & installed updates

I'm not sure that resetting WU would actually cure your problem - it sounds to me more of a systemic problem, possibly to do with one of the involved technologies (scripting, NET, etc.).

My wuapp.exe has TrustedInstaller as owner, with only Read and Execute permissions for users and Admins.

Read other 8 answers

I need help getting my printer to work with a fresh install of Windows 7 Home Premium 64bit. I had to re-install due to a CMOS error which I think was due to a dead battery. It still could be something else seeing as I have had other problems with this install (explained below). Anyway, the printer is an old Brother MFC 8300 (it has been a workhorse!). Previous times I have re-installed Windows there haven't been any problems with this printer. I simply install the driver from Windows Update (the driver is named "Brother MFC8600/9650 Series" in the device manager). But this time the "Windows Update" installed the driver and says everything is working properly but when I go to "Devices and Printers" it doesn't show up under "Printers and Faxes". There is a listing for "USB Composite Device" under "Devices" that shows "Brother MFC8600/9650 Series" as a scanner. Not sure what that means.

I also tried to manually download the driver from "catalog.update.microsoft.com". I downloaded 2 different versions of the driver. One has a file size of 2.0 MB and the other has a files size of 2.3 MB. I ended up not installing either because I didn't know where the proper destination location was using the "Expand" command from the "Command Prompt" with "expand <CAB FILE NAME> -F:* <DESTINATION>". I think the file size for the "Windows Update" file ... Read more

A:Trouble with Brother MFC 8300 driver (installed with "Windows Update")

You may have to change to a User with administrative rights or an Administrator.

There is a listing for "USB Composite Device" under "Devices" that shows "Brother MFC8600/9650 Series" as a scanner. Not sure what that means.

That means your unit is a MultiFunction device and include Printer, Fax, Copier and Scanner. Sometimes the scanner part will be picked up as a separate device because Win7 has a built-in function for scanning.

From Drivers, utilities and software updates for your Brother Product

Dear Brother Customer:

Brother does not have a printer driver available for this model. Most operating systems include printer drivers with their installation program. Please check the manufacturer’s web site of your operating system to see if support is available for this model. If your operating system does not support this model, then this model is not supported.

Thank you for your understanding,
Brother International Corporation

Read other 5 answers

I just installed a home use version of Microsoft Office 2010 on my home PC. Previously this was a problem free, perfectly working installation of Windows 7. Now it appears that the office installation has killed it. Instead of booting up properly, my PC hangs at "Windows is loading files..." if I choose safe mode. Or if I tried to boot up without safe mode, it just freezes at "Starting Windows".

This is a huge problem for me since I work from home. Has anyone been able to solve this issue?

A:Installed "Home Use" Office 2010 on Windows 7. Now my PC Wont boot!

Sounds like a bad install. I would use system restore to return to a point prior to installation. I would then try the OS for a while make sure that it works properly. Then make a system restore point and try to install again.

Try to get to system restore from safe mode. If cannot be done report back and we might try another approach. Try a start up repair
Startup Repair

Many may say, just uninstall. In the case of a bad install, I want to be sure that all is back to where you started and no remnants remain

System Restore

Read other 4 answers


I was trying to use the Vista boot to format a drive that wouldn't let me boot properly... In the process I ended up installing Vista (I deleted a partition and just clicked on stuff automatically cos I assumed it was the same bla bla, but it wasn't)

Anyways, I wanna know if I can recover my old Win7? It's placed in Windows.Old now and Vista is the OS that launches of course.

Thank you

A:Accidentally installed Vista and made it put the Win7 files into "Windows.Old"

You can re-install 7 and it will let you choose which OS to boot.

Read other 4 answers

When trying to use Windows Update, the updates download successfully but fail to install. The following message appears: "Problem: A problem on your computer is preventing updates from being downloaded or installed." I have turned my antivirus software off, I have tried updating manually, I have tried updating one at a time. Nothing seems to work. I now have a backlog of 13 updates that I'm supposed to install. Can anyone please help? THANKS!

A:Windows Update: "problem on your computer is preventing updates from being installed"

Boot into "Safe Mode with Networking" (restart while tapping F8 repeatedly) and see if you can install the updates. This should work.

Read other 14 answers

I have never had a problem installing updates to Win 8.1 and all important updates are fully installed. Every time I try to update to Win10 it says "downloading Windows 10 - checking requirements" and then I get the above error message. Any help would be much appreciated!

A:"Windows 10 couldn't be installed" Error code 80070005

Same problem here. Tired of wasting hours downloading over and over again and getting the same error. None of the suggestions I have found and tried work. No wonder they are giving it away free. To frustrate the heck out of everyone. I find it hard to believe in all the testing, they had no occurrences of this and have not come up with a solution.

Read other 39 answers

Thank's to Broni, I just shook a nasty Trojan virus! However, now that's all taken care of -the printer is not working.

The printer is a HP Officejet J650 All-in-One It prints, scans, and is a fax machine. When I go on Microsoft Word and type in "testing" on a document and hit 'print' the printer will print my sheet out no problems. However, if I try to print a picture or pdf. file, this error message pops up.

For Pictures:

Print Picutures Error
"This picture can't be printed because no printer is installed or a service that Windows needs is not running." --- 'Ok' "Click to expand...

For Pdf files:

Adobe Reader
"Before you can perform print-related tasks such as page setup or printing a document, you need to install a printer" --'Ok' "Click to expand...

I have uninstalled and re-installed the printer's hardware. Made sure the printer's spooler is working (that was an issue once a couple months ago). Set the printer as the "Default" and made sure everything is plugged in correctly. Like I said, it will print perfectly fine if I go on Microsoft Word > Edit > Print > Print and when it brings up the screen with all your print options I have to go up and select the 'printer name' in the drop down box.

So, my guess is that the other programs are not picking up on the printer by themselves because on Microsoft Word ... Read more

A:HP Officejet will not print "Printer not installed/services that Windows needs is.."

uninstall the printer; reboot and then reinstall

Read other 7 answers

i wasn't really sure where to post this, but i have the no audio output device is installed error in windows vista home premium. I have tried everywhere and the only solutions i found were, to scan for hardware changes in my sound card, to disable then re-enable it and to update the drivers. I have tried all those options and it still does not work, Apparently my drivers and everthing is up-to-date.
I am using a HP-Pavillon a1215uk with 3.2Ghz processor and 2GB ram. My sound card appears in device manager as "high definition audio device"

A:windows vista "no audio output device is installed"

Welcome to TSG:
Any error indicators in device manager?
And you have gone to the HP site and downloaded the latest audio device driver ?
Just to make sure that all bindings etc are correct,I might,in de3vice manager,uninstall the device and re-boot. See if that helps.
Just been on the HP site,I do not see a driver for that device and O/S.

Read other 2 answers

Hey everyone,

Today I got myself a new webcam for my PC. Unfortunately, I am unable to get it to work. It is a TeckNet HD720p Webcam, and is supposed to be simple to set up -- you're supposed to plug it in and it's ready to go, but instead I see the above error message.

The lights on the webcam instantly light up, so I do know that there is power being supplied to the webcam. It also came with a disc, which contains an .exe file. When I follow the steps and hit Install, however, it comes up with the following message:

"Please plug-in UVC VIDEO CAMERA device".

I should point out that, as far as I can tell, this software isn't necessary for the webcam to function; I believe it's simply a means of recording. There is nothing else on the disc; no drivers, or any such important files.There is also nothing on the manufacturer's website.

In Control Panel's Devices and Printers, "TeckNet" appears under the Unspecified category (with a yellow warning symbol). When I attempt to "Update Driver" through Properties, I get this:

"Windows found driver software for your device but encountered an error while attempting to install it.

USB Composite Device

Access is denied."

I don't think the problem is specific to this device, either. The exact same problem actually applies to a memory stick owned by one of my relatives, at least when I put it in my machine. I p... Read more

A:Windows 7: "Device driver software was not successfully installed"

Hello Wonder Reece. Welcome to the forum.

In your google search did you find and try this solution:
Windows 7 will not install new USB Drives - Microsoft Community

Read other 9 answers