Over 1 million tech questions and answers.

remove harddisk HP F4H58LA#ABM

Q: remove harddisk HP F4H58LA#ABM

I'd like to replace he hard disk an need an isntruction how to get to the hard disk.

RELEVANCY SCORE 200
Preferred Solution: remove harddisk HP F4H58LA#ABM

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: remove harddisk HP F4H58LA#ABM

Hi, Your machine is an HP 14-r022la as shown: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04334201 Please use information from page 68 of the following manual: http://h10032.www1.hp.com/ctg/Manual/c04513798.pdf Regards.

Read other 1 answers
RELEVANCY SCORE 52

hi,

My HD crash, so i put it as external usb to open, everything open fine, but when i need to go to my folder it keep telling me it cant open due permission, I assume that when i used it in the comp, I password protected it when open windows normally.

Now my question is, i know my password, is a way that i can enter that use-sing that external way, so every folder can open normally?

A:How to remove password of external harddisk

i search my self and this was helpfull http://support.microsoft.com/kb/308421

Read other 1 answers
RELEVANCY SCORE 52

I just don't remember the password and cant find the recovery key. So I just try lot of passwords and now its just ask the recovery key only. I think its because of the too many attempts that I tried to find correct passwords. I have the laptop that I
use to encrypt that harddisk but I don't have any other information. Is there anyway to remove the bitlocker without damaging the files that inside ?

Read other answers
RELEVANCY SCORE 51.2

Hi, I got my new Lenovo Thnkpad P52 Workstation. I'm putting additional M.2 SSD now. I have a 2.5 Spin Drive from factory which have Win10 and as boot disk. Now, I installed M.2 and want to remove my 2.5 HardDisk completely and keep only M.2 as my Boot Disk. Is it possible ? Haver anyone tried ? Please share steps ?What BIOS settings needed to achieve this ?Is it allowed by Lenovo BIOS/Hardware configuration to use without a 2.5 Disk onboard ? Thank! 

A:Remove 2.5 HardDisk and stick with just only M.2 (Boot disk) on P52

no problem.

Read other 1 answers
RELEVANCY SCORE 50.8

i have 10gb harddisk which has a password on how do i remove it kindly assist
 

A:i have 10gb harddisk which has a password on how do i remove it kindly assist

You contact the hard drive manufacturer or a data recovery company.

ATA hard drive passwords are implemented inside the hard drive itself and AFAIK there are no easy and publicly known reset mechanisms.
 

Read other 2 answers
RELEVANCY SCORE 48.4

Hello all,

I need some advice.

I recently replaced my old harddisk to a new harddisk. The old harddisk has windows xp home and other programs installed.

I did not format the old harddisk, I only took out the old harddisk and replaced it with a new harddisk. I then installed windows xp home to the new harddisk.

While I am installing programs on the new harddisk, I discovered that one of the programs do not allow me to activate the program license because I have previously activated the program on my old windows. I need to do a proper uninstallation to release the license, then I can activate the license of the program in the new harddisk.

My question is, can I take out my current new harddisk, replace it with the old harddisk, boot up as normal into the old harddisk windows, uninstall the program inside the old harddisk, then replace the old hardisk with my new harddisk again.

Will I be able to access the old windows on the old harddisk?
Will it mess up my current windows/programs settings?
Will my current new harddisk windows be able to work as normal after accessing the old harddisk windows?
I thought of accessing the old harddisk as a slave, but I do not know if it is possible to access the old harddisk and do a proper uninstall of the program?
Is there any better way of uninstalling the program on my old harddisk?

Thanks in advance.

A:Accessing Win XP on old harddisk to uninstall programs after installing new harddisk

you have to swap out the drive completely. at no time should you have both hdd plugged in.

repeat, do not run them as master and slave. run each hdd individually at each time only.........

Read other 5 answers
RELEVANCY SCORE 48.4

I have 40GB harddisk and now I am moving to 120GB SATA hardisk. But i want all the data with softwares, plugins and all the windows settings to be transferred in the 120 GB harddisk.

There is any way so that all files and setttings will transferred and I dont have to install everything again.

In my system Windows XP Pro SP1 is installed.
 

A:Transfer data/settings from small harddisk to big harddisk

Read other 6 answers
RELEVANCY SCORE 34

Hi which would be the best free hardrive checking tool that would tell me if something is failing or is dead

A:harddisk

http://www.seagate.com/support/downloads/item/seatools-win-master/
http://www.seagate.com/support/downloads/item/seatools-dos-master/

Read other 7 answers
RELEVANCY SCORE 34

Hey can anybody tell me which is the best harddisk drive for which i should go??????????I need atleast 250 gb or more of diskspace so suggest me the best HDD with their latest price ????????Thankyou.
 

A:Best HARDDISK

Get Seagate 500GB SATA-II

125bucks.
 

Read other 23 answers
RELEVANCY SCORE 34

Hi!Where can i buy sata cabel to my ideapad y700 because i have ssd but i cant connect hdd harddisk because i dont know where to buy the cabel. I only have ssd m.2 .  Please help me !

Read other answers
RELEVANCY SCORE 34

hi

i have a western digital 160gb caviar blue hd now i want to buy a new one but some questions are bothering me

first is seagate any better than western digital i ask this because 1tb seagate is just slightly expensive than 500gb western digital so should i go for seagate?

second is that if i buy seagate, will it cause any problem to the system having one wd hd and one seagate?

please answer in details would love to hear anything to increase the knowledge

A:help about a new harddisk?

1. you can mix any makes of disks. They are all 'compatibel'.

2. the make does not matter. They are all the same since they all come from the same factories in Thailand. I have a dozen different makes and do not notice any difference.

3. except Seagate - one of those just died on me. The first and only disk that died in my installations.

Read other 6 answers
RELEVANCY SCORE 34

Hello,

Re: Win98SE - Intel 465 Mhz

The harddisk in my PC is 8 GB of which only 2,56 GB is still available now.
From I similar PC (done away in the meantime) I still have a 8 GB IDE harddisk.
and want to place it in my PC.
Please mind that I have never opened a PC sofar.

a) I don't know to what electronic circuit-cable it must be connected (wondering about serial and parallel)

b) then this second harddisk must somehow be connected to and made visisable to the system (by cables I think; however what cables, new ones or
already present)

When I tried to google this subject I only found items on partitioning etc, not
about how to get and connect a second harddisk inside a PC.
Furthermore I have no idea whether there are special well-known problems
related to having a seond harddisk installed (e.g. very slow system)

Advises will be highly aprreciated.

Best regards,
a.ruiter
 

A:add a second harddisk

This may help http://www.perfectdrivers.com/howto/seconddrive.html
 

Read other 3 answers
RELEVANCY SCORE 34

My computer came with a 10gig hardrive with Windows Me preinstalled. I upgraded to Windows XP Home Edition and have been very impressed it was well worth the 90 I payed for the upgrade pack! I purchased 64MB of RAM to bring my memory from 64MB to 128MB and my computer hasn't crashed ONCE since I got XP! But having two operating systems on one 10 gig hardrive and lots of preinstalled programs such as office has taken its toll and I was warned the other day that my harddisk was nearly full! I deleted all my unnessesary files and managed to get back 1 gig of space but I'm still not happy and would like to get a new 20gig hardrive. It makes more sense to use my recovery disk to return my computer to the way it was when it left the factory and reinstall windows XP on the new harddrive leaving my old operating system on the old C:\ and installing all my programs into the new harddrive. I have two questions about this:

1) Will my computer become dual-boot which i DONT want to happen I want the same setup as I have know but with XP installed on the new harddrive?

2) Will I be able to call my new harddrive B:\ as I don't have a 5 1/2 floppy drive installed and would prefer to have things organised and call it that, if not what will my drive call itself as default as I already have A,C,D,Q,R drive letters already taken?
 

A:Harddisk!

Read other 12 answers
RELEVANCY SCORE 34

I have an ultraDMA harddisk from compaq. I hope to know what is the ATA and RPM value of my 20GB drive. Is there some software that I can use to check it?
 

A:Harddisk

The only 20 GB HDD I could find on the Compaq site is 20GB Ultra ATA 100 Hard Drive (7200rpm)
251974-B21

This was at http://www.compaq.com/products/desktops/options/options_storage1.html
That doesn't mean that there aren't more. The way to know, for certai8n, is to open your system up, and get the part number, or full specs from off the HDD case itself.
 

Read other 2 answers
RELEVANCY SCORE 34

i have an old hdisk on an old pc.
the disk label shows that is 4+ Gigs
when i try to fdisk and format, only half is available
at fdisk options appears to be only 2+Gigs
wtf?
 

A:only 1/2 of harddisk is there!

Read other 6 answers
RELEVANCY SCORE 34

I am trying to setup the 3rd Hard Disk in my CPU. It doesn't seems to able detect my already formated hard disk. Is it possible to have 3 Hard Disk in 1 CPU? If so, how do should I go about it? Do I need to do anything with the Jumper on the Hard Disk?
 

A:3 HardDisk in 1 CPU

Read other 7 answers
RELEVANCY SCORE 34

My computer came with a 10gig hardrive with Windows Me preinstalled. I upgraded to Windows XP Home Edition and have been very impressed it was well worth the 90 I payed for the upgrade pack! I purchased 64MB of RAM to bring my memory from 64MB to 128MB and my computer hasn't crashed ONCE since I got XP! But having two operating systems on one 10 gig hardrive and lots of preinstalled programs such as office has taken its toll and I was warned the other day that my harddisk was nearly full! I deleted all my unnessesary files and managed to get back 1 gig of space but I'm still not happy and would like to get a new 20gig hardrive. It makes more sense to use my recovery disk to return my computer to the way it was when it left the factory and reinstall windows XP on the new harddrive leaving my old operating system on the old C:\ and installing all my programs into the new harddrive. I have two questions about this:

1) Will my computer become dual-boot which i DONT want to happen I want the same setup as I have know but with XP installed on the new harddrive?

2) Will I be able to call my new harddrive B:\ as I don't have a 5 1/2 floppy drive installed and would prefer to have things organised and call it that, if not what will my drive call itself as default as I already have A,C,D,Q,R drive letters already taken?
 

Read other answers
RELEVANCY SCORE 34

I have an 80GB IDE Hitachi HD which was formatted NTFS on my computer running Win 7 Ultimate. My problem is that when connected to my computer via external Sharkoon Drive link USB adapter, it is not shown in Windows Explorer but is shown in Device Manager as USB Device and in Computer Management it is shown as ?Disk 1 ? Not initialized? and when clicking on to initialize, an error shows as ?This device not ready?. Same occurred on another PC running Vista Ultimate. Strangely, when connected to IDE inside PC it works perfectly. Can anyone help please?

ASUS P5GC-MX/1333 MB
500GB sata Hitachi HDD
2GB Ram
3.2GB CPU
Windows 7 Ultimate

A:USB Harddisk

Does the USB adaptor work correctly with any other drive?

Read other 4 answers
RELEVANCY SCORE 34

Hello,
a week ago i transferred a list of archived files to my mp4, then the light went off ,when it came back, i can't find the archives on the partition , nor the mp4

also some sound files disappered from the mp4, also files are occupying space whether on the hard disk or the mp4

i tried to show hidden files, but i still can't find the files

so what's wrong ?? , how can i get the files again ??? because the computer shows that they are still occupying space

thanks in advance

Best regards,

A:HardDisk & MP4

  
Quote: Originally Posted by Mitooo


Hello,
a week ago i transferred a list of archived files to my mp4, then the light went off


Hi.

Does that mean you lost power to your computer or drive?







  
Quote: Originally Posted by Mitooo


because the computer shows that they are still occupying space


If you lost power whilst transferring, there is a good chance some of the files will have become corrupt.

Read other 5 answers
RELEVANCY SCORE 33.6

Halo.I have replaced my harddisk after a crashed. Never made a recovey disk. How to get the notebook working again.What to do? Must I buy a new OS for the machine and where to buy?

A:Harddisk crashed

Hello, Thank you for posting in the HP Support forum. If your computer originally came with Windows preinstalled, your computer is eligable to original Windows. You can purchase and use HP Recovery media to restore your PC to factory default condition. HP Recovery media might not work if your new HDD is smaller (with smaller capacity) than the original one >> e.g. original one is 500 GB , new one is 128 GB. Please, post this information:>> your full computer model and PN  >> http://support.hp.com/us-en/document/c00033108>> country where you are and where you bought the PC from  Looking forward to your reply.

Read other 1 answers
RELEVANCY SCORE 33.6

hi
i have a mdf file on a cd which i try to copy from the cd to the harddisk...it doesnt...it gives an error which says

error copying file or folder

Cannot copy mir-popt2t.mdf there is not enogh disk space

the size of the file is 4.6gb and the drive i am trying to install it to has more than 20 gb free

waT SHUD I DO?
 

A:cannot copy from cd to harddisk

You posted it in the wrong forum. Please try to get it in the right forum for a faster response, or a response at all.

If the file is 4.6 gigs, its on a dvd and not a cd, but regardless, what file system is that hd formatted in? If its FAT32, right there is your problem, FAT32 can't handle files over 4 gigs in size. You will need to convert the FS to NTFS if you are on a Windows machine.
 

Read other 1 answers
RELEVANCY SCORE 33.6

Hello everyone! Just got a little question.

I'm trying to upgrade my harddrive I currently have 4G and i just purchased a new 15G HD. I used the program HDCOPY to migrate my data and OS to the new HD. Then i noticed that my new HD also copied the size of the old one and i believe that i formatted it first and i believe it was 15GB before i copied the old HD.

What do i need to do? Do i have to use another program? Do you know any? or there's just one thing that I need to do to get my original size back?

Thanks
 

A:Copy Harddisk

Hi NavigatorX
I have never used hd copy but from this site it looks like there are two different modes of copying. One uses a sector by sector exact disk image (which is what you have done.) The other mode does a logical file copy and leaves the partition table alone. I think this is their

site.http://212.223.28.218/default.htm

I use a program called file copy which I run from windows. I think it came from ontract with an IBM drive. You may also want to consider using a program like partition magic. This will get your partition restored back to it's original size and keep the data as is.
 

Read other 1 answers
RELEVANCY SCORE 33.6

Hey,
Does anyone known where I can find an up-to-date database of all existing harddisks sorted by manufacturer or type.
Thanks
Frank
 

Read other answers
RELEVANCY SCORE 33.6

I was thinking about partitioning the hard drive on one of my computers running XP SP3 and installing other Operating systems on them, but I have no clue how to do it Also, I know there's a way to do it with an OS disk, but I have a SP2 one, would using that make a difference partitioning the harddisk?

A:Partitioning a harddisk

I would recommend wiping the entire disk, and starting from scratch using the Windows installer to partition your drive out. What size of drive is it, and what OS do you plan on installing on the other partition?

Read other 4 answers
RELEVANCY SCORE 33.6

I need the harddisk driver to my HP x2 210 G1 detachable tablet. I try to use the SCCM to deploy a new image to my tablet, but I need the driver to the harddisk. I have spoken to a technician at HP Support, and he told me that the harddisk was on the motherboard and that there was no driver available. I find this hard to believe. Can anyone help me to find this driver?

A:Harddisk driver x2 210

I wish I could help with your pxe boot problem. Have you tested that this particular usb adapter works/boot on other PCs? Our tablet is a "system on a chip (SoC)" so the drivers are bundled together as you see on the HP support page. The chipset download contain the emmc driver as well. . Intel does have newer drivers for a few of the devices, you can get these by using something like windows update minitool. I doubt new drivers will fix your issue since it seems to be a pre-OS boot issue.

Read other 1 answers
RELEVANCY SCORE 33.6

Hi I have a 1Tb SATA hard disk, Iam planning to replace it with a SSD for better performance, is this possible? and if so what is the maximun capacity that can be installed.

A:Harddisk Upgrade possible?

Hi, Basically yes and to make everything simple, please use 1TB SSD. Samsung 850 series is very hot now. Why I say easy/simple, because with 1TB (or larger) you can clone the whole existing HDD (1TB) and the changeover will be much simpler. Regards.

Read other 1 answers
RELEVANCY SCORE 33.6

Hi.
I have an external harddisk of 1TB recently it became RAW type and i have lot of data in it so I tried TESTDISK but everything goes fine but in the end it happens nothing, it again shows in RAW format and windows ask me to format the disk to use it.

Somebody help me.Thanks in advance
 

A:External HardDisk became RAW

Read other 15 answers
RELEVANCY SCORE 33.6

My harddisk is keep working, although I do nothing. Even I close all applications, it still running and cause my computer work very slow.
I don't really know what happen with my computer. If anybody know how to fix it, please tell me.

thanks you!!
 

A:Got a harddisk problem!! need some help!! plz!!

Please post more details!! Like anything strange happen lately, recent downloads, hardware changes, do you run a firewall, virus protection, system specs etc. etc.
 

Read other 2 answers
RELEVANCY SCORE 33.6

hi,
i had some problems booting to my xp pro.
the system was unstable. sometimes it booted but then crashed. sometimes didn't even booted.
so i installed my old hd. installed xp on it. & when i tried ti access my problematic hd windows told me the drive should be formated first
why format it? i can boot from it so there is data there...

i want to backup the data there before formating. then i'll install xp on it. (that is why i used my old hd).

thanks
 

A:HardDisk Problems

Read other 6 answers
RELEVANCY SCORE 33.6

Hi good people, I have been using my external drives full of office folder, but this morning I have found all of them with .exe extension and I cant access them at all can some help me to access them and recover my folder.Thanks in advanceEDIT: I moved your topic to a more appropriate forum ~ Elise

Read other answers
RELEVANCY SCORE 33.6

Dear members,
I bought a new 320 GB harddisk (Seagate, ST3320620A). First, I open my Computer's case then pluged it as the secondary harddisk for formating it. It's done, I can find my new drive. Then, I took it out and put it into the external case to use it as the portable-external harddisk. But when I connected it to my computer using USB cable, my computer cannot see the new drive. Normally, this case may be happen, if you haven't enough USB power supply. But in my case, the external case provides the power supply too (with AC adapter). Moreover, I tried to change the USB cable to the another good one, it's still not working.
However, I connected it to my friend's computers, some of them can work properly but some cannot work. Is it the USB driver problem? How should I do?

--I use Windows XP Professional (lastest update) on Dell Optiplex GX280.

Thank you very much,
 

A:Cannot found 320 GB Harddisk

Hi Ceowebmaster and welcome to the TS Forums

I dont get this part of your post.





ceowebmaster said:



However, I connected it to my friend's computers, some of them can work properly but some cannot work. Is it the USB driver problem? How should I do?Click to expand...

Mostly when an HD in an external closure is not seen by the OS it is because the HD is set to cable select not master.

If however the enclosure works OK on another machine then yes you have some kind of USB issue, the easiest cure for this is to remove all USB related items under Device Manager and then reboot, XP will refind the items on bootup and reinstall them.

Please explain your post or let us know if the abvove is of help.

Regards
 

Read other 1 answers
RELEVANCY SCORE 33.6

I have a 210GB Hard drive and apparently i only have 16GB of space left. This didn't look right to me so i went into my Cdrive and checked the size of each folder and added them up on a calculator. Not counting folders that were a few MB or KB the calculator told me i have only used approximately 146GB of space. I ran a defrag and cleanup only a few days ago. So what's going on?

Here are the folders in my C drive:

Program Files = 2GB
Program Files (x86) = 70GB
Windows Folder = 23GB
Users = 44.6GB
SwSetup = 6GB
Temp = 0 bytes
PerfLogs = 0 bytes
Intel = 604KB
inetpub = 188KB
IExp1.tmp = 0 bytes
IExp0.tmp = 0 bytes
Games = 126MB
col1832 = 2.16MB
ATI = 248MB
AMD = 3.87

A:HardDisk Problem

Are you counting hidden and system files?

Read other 9 answers
RELEVANCY SCORE 33.6

I dual-boot my pc. Win2000 and Win XP. The software i used for cloning the harddisk is Norton ghost 2001. Its installed on win2000. My question is, if i clone the pc, will i only clone the partition with the win2000 only? or the software will clone the whole harddisk for me including all the partitions and information thats on a single harddidk?
 

A:clone a harddisk

Read other 6 answers
RELEVANCY SCORE 33.6

I want to set a password to my Harddrive of computer. I also do not know how does it help to keep hard drive secure.
Also please suggest a freeware for folder lock (other than folderlock software).
 

A:Harddisk password

this is set via the bios
as the PC starts it should flash on the screen for a few seconds how to get to the bios/setup
often at this point you press a key to enter
depending on make an model of your PC
could be <F2>or <F10> or <Del> or another key

In the bios will be a section, probably security to set a bios / harddrive password
in some cases just setting the bios also sets the harddrive
BUT
if you forget the harddrive password - remember if you forget the password , you will not be able to access the harddrive , even if you put it into a different pc
 

Read other 1 answers
RELEVANCY SCORE 33.6

Hello

I'm trying to install a second hard disk into my 5 year old
Pentium 3 550 MHz. My original disk is 30 Gigs, and I'm trying to add a Maxtor 120 Gig harddisk as the secondary one. I dont have the full details right now because my friend tried the installtion for me. However the gist of the problem is this: Both hard disks are appearing on the bootup screen (the screen that first shows up when one restarts), the Maxtor 120 Gig as the slave, and the original 30 Gig as the master. However its not appearing under My Computer. To my knowledge the jumper settings are fine.

FYI I'm using Windows XP so the hard disk should be plug n play.

Can anyone advise?

Thanks
Dan
 

A:cant install harddisk

Read other 14 answers
RELEVANCY SCORE 33.6

I can no longer detect my 320GB HD, well... sorta, it's partitioned into 2 drives, one is viewable while the other is not. Under Window's Defragment, it says it's an unmounted volume - how can I re-mount it?
 

Read other answers
RELEVANCY SCORE 33.6

Hi,

I am getting following warnings via Crystal disk info. Please help how to resolve them:

http://img821.imageshack.us/i/hdderror.jpg/
 

A:Harddisk error Please help

Read other 10 answers
RELEVANCY SCORE 33.6

hi, My HP 255 G3 doesn't boot any more. The harddisk check gives FAILURE ID 9AJE04-7LW8H2-XD7V7A-61CQ03.I could now buy a new harddisk, but that would come without OS. The OS was pre-installed on the harddisk, so where do I get that from? Or can I somewhere buy a new HD with pre-installed OS? thanks,/conny

A:Harddisk failure HP 255 G3

Hello Conny2003, No Harddrive will come preloaded with OS.  If you want the HDD replaced and OS reinstalled together, you will have to send the laptop to HP for service. This will done free of cost if your laptop is under Warranty. If not under warranty, you will have to call HP and look out for Out of Warranty options and charges are applicable. Whenever the Hard Disk Short/Long DST test fails that indicates that the Hard Disk Drive has failed and that requires a replacement to resolve the issue HP will provide a replacement Hard Disk Drive if the Notebook warranty is Active, If not you need buy a SATA Hard Disk Drive from a retail shop nearby  Please Contact HP if your HP Notebook is under warranty, HP would replace the Hard Disk Drive and provide you a Recovery media to restore factory operating system after replacement (if you've not yet created Recovery Discs/USB Media) Note: Back up all the personal data to an external drive if it's possible. Otherwise you could connect the failed HDD via SATA to USB adapter with another PC or same PC after replacement of HDD & re-installation of OS and try copying /recovering the files. You can also refer to the below shown link for further supporthttp://www.wikihow.com/Recover-Data-from-the-Hard-Drive-of-a-Dead-Laptop Please click on the link In order to Identify, Prevent, Diagnose & Recover from Drive Failures on HP Notebook Hard Drives & Solid State Dr... Read more

Read other 1 answers
RELEVANCY SCORE 33.6

Anyone knows how to make the usb harddisk bootable?

As for the bios side, I already set first boot device to usb-hd.

Thanks.
 

A:Booting from usb harddisk.

Although some manufactureres claim USB "bootablity" right ut the box that not usually the case. I searched for answers to your question and it might involve a little more from your side.

For starters make sure you have the latest version of your BIOS.

You might want to then format and partition the drive and make it a bootable drive in that sense. Either through DOS or Windows.

Also, you might want to copy the same bootable files located in a floppy boot disk (make sure the boot files are the same as the OS your using) to your USB hard drive.

If you still need more "oomph" to this answer check out this site. https://www.codidirect.com/shop/thefactsbehindbootability.htm . Keep in mind that although they are mentioning USB Flash devices, the same technically applies to a USB HDD since it is also classified as a "storage device".

Hope this helps!!
 

Read other 3 answers
RELEVANCY SCORE 33.6

i used laptop hd as an external harddisk whenevr i connected in my computer(win7,64bit) it did not detect the drive but i try it to 3 other computer it detect the drive, what should i do please help me
 

A:harddisk is not detected

Hi benangaihte

Right click on my computer
Choose MANAGE
Then find DISK MANAGEMENT
You should see your ext hard drive under the list.
Right click on it, and choose CHANGE DRIVE LETTER
Choose anything, but I recommand something higher than M:

I've seen this problem with alot of STORAGE DEVICE

It happen more often with Laptop because they usually have Card reader.
So it makes couple drives like e:, f:, g:.
Storage device tries to install themself with the drive letter next to CDROM
c: - HD1
d: - HD2 or CDROM
e: - Mass storage device (maybe for card readers)
So your external HD tries to have the E: drive (probably a bug)
 

Read other 1 answers
RELEVANCY SCORE 33.6

Would i be able to connect a 200mb Harddisk to my compter, to copy the contents into an image with Norton Ghost. I have IDE CD CDRW and Hardisk already and would make this disk a temp Seconary slave. My mother board is June 2000 Bios dated im guessing this would auto detect 200mb disk. What Specs do u think 200mb disk would be any any probs which might arise?

Cheers guys
 

A:OLD 200mb HardDisk.

Yes that should work. Just use auto geometry. Mobo's IDE is backwards compatible.

I don't think you would want to keep it on there long after the data was copied off of it, though. Such an old device is just taking up a valuable IDE channel.
 

Read other 2 answers
RELEVANCY SCORE 33.6

as you see in the picture that there is a needle over the circular disc so my curiosity is that what makes that needle move here and there, and doesn't it will be out of order before the hard disk. doesn't it make scratches while moving so quickly over the disk? please remove my curiosity

A:working of harddisk

Video here:

http://www.youtube.com/watch?v=t6wTZhsffEE

Read other 6 answers
RELEVANCY SCORE 33.6

Hi guys,

I built my own computer about 2 weeks ago. The problem is the Harddisk is not detected in BIOS ( Boot recognizes the Harddisk) since the first day. I could manage to load windows and until now everthing is running smooth.
Today I wanted to install a second OS (Linux). I got the message that there isn't a Harddisk on my computer. I tried after that to install a second version of windows with the same result- Harddisk not detected.
I tried to change the jumpers on my Harddisk with the result that Windows didn't start up.
In BIOS everthing is on Auto. What's the problem?

P 4 630 3.0 Ghz
Asus P5LD2
80 GB HDD Seagate IDE
windows xp pro SP2

thanks for your help.
 

A:Harddisk not detected

Read other 12 answers
RELEVANCY SCORE 33.6

hello I'm back again with his brand problematic disks WD Scorpio Blue. bootscreen loading resulted in a very long time and finally did not find the drive...

how to fix that

A:HARDDISK not bad sector

If you would please list the modle number of your laptop, so we can see if it's a PATA or SATA drive. Or the exact modle number of the drive.
http://www.wdc.com/wdproducts/library/SpecSheet/ENG/2879-701278.pdf

If it's a PATA drive make sure that the little jumper on the drive is set to master or cable select.
http://support.wdc.com/images/kb/scorpio_jumpers.jpg

Thanks Fabe

Read other 2 answers
RELEVANCY SCORE 33.6

Hi,

My laptop internal harddisk is not accessible. The laptop was switched ON and I was holding it in my hand. Suddenly it slipped and fell down. Since then, the harddisk is not accessible. Windows and BIOS are not detecting the harddisc. So, I bought a new harddisc and replaced it with the old one. Then I connected the inaccessible harddisc to the laptop via USB port by purchasing a harddisc casing and connector. But the disc did not get detected. I didnt see it in disk management. I use windows 7 OS. The connector cable I purchased is Y shaped at one end with two USB connectors. The other end has only one connector which goes to the hard disc.
I have data in the harddisc and I need to recover it. Is there any way I can access the harddisc? Please help!

Thanks & Regards,
Phani
 

A:Harddisk not accessible

First did you use the Usb plug with 2 wires at the computer end ? If not please do so. Also, try it with both Usb plugs in ports at the PC end.

If that doesn't help it looks like the drive is too badly damaged to work.

EDIT : Oh and welcome to TSG
 

Read other 3 answers
RELEVANCY SCORE 33.6

Hey there

I'm having a weird issue with booting up my computer and I'm hoping to find a solution that does not involve reinstalling windows completely. Might come to that, but first I'm looking for other issues.

To give some context:
A few months ago my primary harddisk started failing. I acquired a new harddisk, installed windows on it and it has been working fine.

When I boot up the computer, I can select between the old and the new windows installation and I've simply been using the new one. I've left the old harddisk plugged in as I had some data on it I wanted to salavage and then I just left it there. I've gotten the data of it and have had no reason to unplug it.

Recently, however, I wanted to unplug the old harddisk as there has been some issues with hangups and I had a suspicioun they were caused by windows (for some reason) reading from the old harddisk.

When I unplugged it I got a "Bootmgr is missing" error and could not boot up. Thus I need to have the old harddisk plugged in in order to boot up windows.

WHich is annoying, as I think the old harddisk is the cause of the performance issues I've been having.

Obviously the new harddisk has not been made bootable by installing windows on it. The old harddisk was plugged in when I installed windows, so that's likely the cause of it (for some reason...?).

Is there any way for me to fix this without unplugging the old harddisk and installing windows again? I'd rather ... Read more

A:Cannot Boot from Harddisk

The Windows installer will put its boot-up code (the bootmgr) on the primary hard drive regardless of the drive that Windows proper is installed on. You can repair this by booting your Windows 7 DVD and running the Startup Repair tool. See Microsoft's how-to article here. Make sure that the original disk is unplugged before attempting this repair.

Read other 7 answers