Over 1 million tech questions and answers.

BSOD DRIVER STATE POWER FAILURE 9f, on sleep

Q: BSOD DRIVER STATE POWER FAILURE 9f, on sleep

Been having issues with sleep mode with my build for months but in the past couple weeks it has gotten worse. When the computer goes into sleep, there's about a 50 percent chance it will wake up when I move the mouse. The other times I have to hard restart. In the past week it is now BSODing and giving me the attached dump reports. I'm pretty sure it's a driver issue but I can't narrow it down any more than that. Interested to hear what the experts think.

RELEVANCY SCORE 200
Preferred Solution: BSOD DRIVER STATE POWER FAILURE 9f, on sleep

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD DRIVER STATE POWER FAILURE 9f, on sleep

Hi slash196.

Update the driver to TP-LINK 150Mbps Wireless Lite N Adapter from Download - Welcome to TP-LINK, by matching with your device number.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Also, if possible, update the BIOS to Version 1501 from ASUSTeK Computer Inc. -Support- Drivers and Download M4A88TD-M/USB3

Let us know the results.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8006a9e060, fffff80000b9c518, fffffa800a2fb920}

Probably caused by : ntkrnlmp

Followup: MachineOwner
------------------------------------------------------------------------------------------
Dispatch routines:
[00] IRP_MJ_CREATE fffff880016e7c30 ndis!ndisCreateIrpHandler
[01] IRP_MJ_CREATE_NAMED_PIPE fffff8800177e490 ndis!ndisDummyIrpHandler
[02] IRP_MJ_CLOSE fffff880016e8010 ndis!ndisCloseIrpHandler
[03] IRP_MJ_READ fffff8800177e490 ndis!ndisDummyIrpHandler
[04] IRP_MJ_WRITE fffff8800177e490 ndis!ndisDummyIrpHandler
[05] IRP_MJ_QUERY_INFORMATION fffff8800177e490 ndis!ndisDummyIrpHandler
[06] IRP_MJ_SET_INFORMATION fffff8800177e490 ndis!ndisDummyIrpHandler
[07] IRP_MJ_QUERY_EA fffff8800177e490 ndis!ndisDummyIrpHandler
[08] IRP_MJ_SET_EA fffff8800177e490 ndis!ndisDummyIrpHandler
[09] IRP_MJ_FLUSH_BUFFERS fffff8800177e490 ndis!ndisDummyIrpHandler
[0a] IRP_MJ_QUERY_VOLUME_INFORMATION fffff8800177e490 ndis!ndisDummyIrpHandler
[0b] IRP_MJ_SET_VOLUME_INFORMATION fffff8800177e490 ndis!ndisDummyIrpHandler
[0c] IRP_MJ_DIRECTORY_CONTROL fffff8800177e490 ndis!ndisDummyIrpHandler
[0d] IRP_MJ_FILE_SYSTEM_CONTROL fffff8800177e490 ndis!ndisDummyIrpHandler
[0e] IRP_MJ_DEVICE_CONTROL fffff8800177e020 ndis!ndisDeviceControlIrpHandler
[0f] IRP_MJ_INTERNAL_DEVICE_CONTROL fffff8800177e490 ndis!ndisDummyIrpHandler
[10] IRP_MJ_SHUTDOWN fffff8800177e490 ndis!ndisDummyIrpHandler
[11] IRP_MJ_LOCK_CONTROL fffff8800177e490 ndis!ndisDummyIrpHandler
[12] IRP_MJ_CLEANUP fffff8800177e490 ndis!ndisDummyIrpHandler
[13] IRP_MJ_CREATE_MAILSLOT fffff8800177e490 ndis!ndisDummyIrpHandler
[14] IRP_MJ_QUERY_SECURITY fffff8800177e490 ndis!ndisDummyIrpHandler
[15] IRP_MJ_SET_SECURITY fffff8800177e490 ndis!ndisDummyIrpHandler
[16] IRP_MJ_POWER fffff880017327c0 ndis!ndisPowerDispatch
[17] IRP_MJ_SYSTEM_CONTROL fffff880017528f0 ndis!ndisWMIDispatch
[18] IRP_MJ_DEVICE_CHANGE fffff8800177e490 ndis!ndisDummyIrpHandler
[19] IRP_MJ_QUERY_QUOTA fffff8800177e490 ndis!ndisDummyIrpHandler
[1a] IRP_MJ_SET_QUOTA fffff8800177e490 ndis!ndisDummyIrpHandler
[1b] IRP_MJ_PNP fffff88001783220 ndis!ndisPnPDispatch
----------------------------------------------------------------------------------------------
fffff880`02602000 fffff880`027ca000 athurx (deferred)
Image path: \SystemRoot\system32\DRIVERS\athurx.sys
Image name: athurx.sys
Timestamp: Tue Jan 05 08:53:16 2010 (4B42B0A4)
CheckSum: 001C7F92
ImageSize: 001C8000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Read other 1 answers
RELEVANCY SCORE 118.8

I've started getting driver power state failures BSODs after my computer goes to sleep.

These started in the last couple of weeks. It's happened twice today already. When I first noticed these occurring, I used System Restore to undo my last installs, but it didn't help.

I'd greatly appreciate any help fixing this.

A:BSOD after going to sleep, driver power state failure

Welcome

Your Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC is causing BSoD
Update to latest drivers

Code:
>[ 16, 2] 0 e1 fffffa8005c3a050 00000000 fffff800032d5200-fffffa8007049c50 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
\Driver\RTL8167 nt!PopSystemIrpCompletion
Args: 00014400 00000000 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8007049c50

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm Rt64win7
start end module name
fffff880`06d15000 fffff880`06d7f000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Wed Jan 26 19:34:03 2011 (4D4022CB)
CheckSum: 0006AFBB
ImageSize: 0006A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Source | Driver Reference Table

Also Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

→ RAM - Test with Memtest86+
→ Guide to using Memtest86+ - Geeks to Go Forums

Read other 9 answers
RELEVANCY SCORE 117.6

Hello, all. Every now and again my laptop BSOD's when I leave it on sleep mode over night. Today the laptop lit up and started running while it was closed and I opened it to see the Driver_State_Power_Failure error message. Attached are the files gained from the SF Diagnostics Tool. Any help is greatly appreciated.

A:BSOD During Sleep Mode - Driver State Power Failure

Hello fran.

It appears that Avast is causing the BSODs there.

avast! Self Protection Driver

Code:
fffff880`02677de8 fffff880`068e2940Unable to load image \SystemRoot\System32\Drivers\aswSP.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSP.SYS
aswSP+0x2f940
Description here: Driver Reference Table - aswSP.SYS

avast! Virtualization Driver

Code:
fffff880`02677d68 fffff880`066d32ccUnable to load image \SystemRoot\System32\Drivers\aswSnx.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
aswSnx+0x4e2cc
Description here: Driver Reference Table - aswSnx.SYS

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Using more than one antivirus program is not a good practice. It will make your system unstable in turn. Uninstall McAfee Using McAfee Removal Tool.

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it... Read more

Read other 1 answers
RELEVANCY SCORE 117.6

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8009DBD060
BCP3: FFFFF80000B9C518
BCP4: FFFFFA800ED33010
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\120410-48828-01.dmp
C:\Users\Jon\AppData\Local\Temp\WER-70980-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Yeah, i get this whenever my computer goes idle and into sleep mode, and when i shut down. Any way to fix???

minidump -- http://www.megaupload.com/?d=J07IWJQ0
 

Read other answers
RELEVANCY SCORE 117.6

Dear Sir/Madam,

I've been having this issue since updating to Windows 8.1. I will wake my computer from it's sleep and a few minutes later I get the BSOD. In one notable event early on, I got two in a row after the computer restarted from the previous BSOD.

I fiddled with my power settings (I was trying to avoid my computer actually shutting down during sleep/hibernation) a few months ago and after that I didn't have any BSOD events that I recall until this past week. When they do happen, they tend to happen in rapid succession, as you can see from the dates on the collected data I've attached (I see there's a .txt file with all my computer's information for you reference) - I've had one every day for the past three days.

I've read through many of these threads and tried several of the solutions. I am running verifier.exe since the BSOD has started up again since from what I can understand from reading the .dmp file and this forum that the message I'm getting about ntoskrnl.exe is misleading (?).

Please take a look at the dumps and other information collected from the DM Log Collector Tool and let me know if you can help me solve this problem.

Thank You.

A:BSOD Waking from Sleep (power state driver failure)

Hi, pnutbudder,

I've been having a similar problem since a few weeks ago. I suspect this is due to a recent Windows or driver update, since both of us had the same problem at the same time. I'm going to take a look at your dump files in a few hours, but in the meantime, could you tell me

1. whether you have Evernote or any Blizzard games installed
2. whether you've installed any new programs recently,
3. what graphics drivers you have installed,
4 what music or audio programs you have installed (eg, music players, movie editors, music studios and recording programs, game streaming programs)?

EDIT: Okay, I took a look at your dump files, and they point to a bad interaction between the "usbccgp.sys" and the "ksthunk.sys" driver. These are the same drivers that are misbehaving on my system, too (Lenovo Y510P). As far as I can tell, the only device that uses ksthunk.sys is the Lenovo EasyCam. Try this fix:

1. Download the "Broadwell" version of the camera driver on this page: http://support.lenovo.com/us/en/prod...loads/DS101169 . We're going to replace your current camera driver with Lenovo's original camera driver.
2. Open "Device Manager" by right-clicking on the lower left corner of the screen.
3. Double-click "Imaging Devices" to open it.
4. Right-click "Lenovo EasyCamera" and click "Disable". You should see a small downward-pointing arrow appear next to the picture.
5. Right-click "Lenovo EasyCam... Read more

Read other 5 answers
RELEVANCY SCORE 117.6

Hey!

I got an BSOD from sleep mode. Was off to go outside the summer heat today and when I came back... BSOD..


However the system managed to dump two files for me on BSOD.

Take a look and thanks for the help you give me :)

A:DRIVER POWER STATE FAILURE Sleep mode BSOD.

Hello,

Please take a look at the following thread and perform all of the requested steps.

Once you have all the requested reports please attach back here.

http://www.techsupportforum.com/foru...ta-452654.html

One dump is really not sufficient to determine the cause. The reports will also provide other info to help diagnose the issue.

The dump provided indicates a problem with the Realtek Network driver please try updating or re-installing this driver.

Realtek

I would also suggest that you fully update Windows including the Windows 7 Service Pack.


Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`03268000 PsLoadedModuleList = 0xfffff800`034a5e50
Debug session time: Fri May 10 12:00:54.715 2013 (UTC - 4:00)
System Uptime: 0 days 8:41:33.010
Loading Kernel Symbols
...............................................................
................................................................
...........................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *... Read more

Read other 2 answers
RELEVANCY SCORE 117.6

I have tried to test this issue my self by trying to read trough the DMP file and Event Viewer. (haven't done this before, so i think i have possibly overlooked something)
The computer model is: HP ProBook 430 G2
The things i have tried is uninstalling and updating the drivers.
Using another OS Disk (It worked fine when doing this)
Starting in safe mode (This also worked fine)
Checked advanced power settings (Was nothing wrong there from what i could see)

Read other answers
RELEVANCY SCORE 117.6

New build i7 asrock motherboard W8 Pro. when waking from sleep everytime I get driver_power_state_failure BSOD.
Looking for some help on where to start. Updated the bios and everything else works great.

Thanks for any advice

Attachment 14584

A:BSOD Driver Power State Failure when waking from sleep

You have 3 hard drives - what is the make/model/wattage and age of your Power Supply?

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:





There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.
- Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with you... Read more

Read other 5 answers
RELEVANCY SCORE 116.4

Hello

I am experiencing a BSOD (DRIVER POWER STATE FAILURE) error with my ACER notebook.
It always come up after I put the computer in sleep mode.

After dozen of search and websites, I found this forum.

I hope you will be able to help me.

Please find below the informations about my OS
- Windows 7 Home Premium Edition
- x64
- OEM
- age of the system : 3 years old. The hard drive has been replaced 1 year ago.
- age of OS installation : 2 days old (reinstalled from the recovery disk)

I have also attached the System Health Report AND the BSOD Dump & System File Collection report.

Let me know if you need something else... and Thank already !

A:BSOD after sleep mode, 0x0000009f (DRIVER POWER STATE FAILURE)

Please install any Windows Updates you have not yet installed. I notice you do not have Service Pack 1 installed yet.Update to Service Pack 1 (SP1)Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 (KB947821) [August 2011]

Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [August 2011]

Steps to follow before you install Windows 7 Service Pack 1 from the Microsoft Download Center

Service Pack 1 Download site




Crashes indicate USB device issues.Start with USB Driver - General Fix for Problems to resolve the USB issues. Also, USB ports can sometimes enter a safe power state to protect the system from power surges due to USB devices. To reset the USB ports to a nominal power state:
Shut down and turn off the computer.
Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
"Remove the computer from any port replicator or docking station, disconnect
cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
Hold down the power button for 30 seconds. This closes the circuit and ensures all
power from components is drained t... Read more

Read other 1 answers
RELEVANCY SCORE 116.4

I am getting a BSOD mostly when I turn the computer on from sleep mode during sleep wifi will be on and most probably 1 of the browsers would have been working.

Reinstalled Windows 7 on Oct 8 and downloaded some drivers from the net.

I have uploaded the SF diagnostic zip file

Any help would be greatly appreciated

A:BSOD after turning computer on from sleep DRIVER POWER STATE FAILURE

Welcome aboard. Is there any reason that you haven't installed service pack 1?

Read other 9 answers
RELEVANCY SCORE 116.4

I'm using a Lenovo Y50 running Windows 8.1. This issue has been happening every now and then for the past week or so. I noticed it occurs briefly after waking the computer from sleep mode. I can get to the desktop but about a minute after waking, the laptop will freeze up and give me a blue screen saying it was a DRIVER_POWER_STATE_FAILURE. I'm assuming this error has to do with some driver, but I don't know how to figure out which driver is the one causing the issue. I looked in Device Manager and can't find any yellow exclamation marks pointing out issues.

Here's a link to the most recent dmp file:
https://drive.google.com/file/d/0B2kQd8xpvK9STnd3MjVFWHJJOEE/view?usp=sharing

Thank you in advance to anyone who can help me out with this!
 

A:BSoD - Driver Power State Failure after waking from sleep mode.

For the time being and for troubleshooting, please uninstall Trend Micro and just
utilize Windows Defender. Trend Micro can be reinstalled once the problem is isolated.
http://esupport.trendmicro.com/en-us/home/pages/technical-support/1105809.aspx

What is all plugged in via USB?
Did this started happening after installing/updating Razor Synapse?
 

Read other 1 answers
RELEVANCY SCORE 115.2

i guess i've been having this problem for about a month or so now and it's really becoming frustrating because everytime i have to leave my computer i have to shut it down if i don't want a BSOD..

i hope that someone can help me... every time i try to hibernate my laptop which is a HP DV4 Windows 7 Laptop i get a blue screen of death. it only started happening recently....maybe after i installed bit-defender..i'm not really sure..but it was doing fine before bit defender......

i used blue-screen view and with each time it registers a error it's with the driver for the NTOSKRNL.exe... i really hope that someone could help me because i just want my computer to go back to normal....and i wish that the problem has nothing to do with bit-defender......

tell me what you need and i'll try my best to get it to you so you can assist me with this problem cause i'm kinda new to the whole forum thing....

thanks..

A:[SOLVED] BSOD Driver Power State Failure When Hibernating/Sleep Windows 7 HP DV4

Hi and welcome to TSF please follow the instructions here http://www.techsupportforum.com/f217...ns-452654.html

Read other 17 answers
RELEVANCY SCORE 115.2

Hello all

This is my first post in here. Please bear over with my English – it is not my native language.

My problem is on a Media Centre machine where I recently upgraded Motherboard and processor. I have the following setup on the machine:
SILVERSTONE Grandia 04
DeZen PSU 500 Watt, TitanPower, 17-19 db
MB: Asus P8H77-MLE
CPU: Intel i3 2120
2x4 GB Corsair Vengeance ram (just bought new ones to see if it would help)
OCZ Agility 3 SSD 120 GB
1,5 TB WD Caviar Green
Asus P7131 Tuner
TERRATEC Cinergy DT USB XS Diversity
Hauppauge! WinTV-NOVA-T-Stick-Diversity
Hauppauge! Smart CI USB

My previous setup was with a AMD 240e but I have made a clean install.

I use Microsoft Security Essentials for antivirus and have firewall turned on.

The Media Centre machine is on for 24/7 on sleep mode for recordings or turned on for showing recordings.
Since the upgrade I have BSOD most times after it is turned on after sleep. The STOP occurs 4-5 minutes after the wake up either the wakeup is initiated from a recording or from user. I even see BSOD occur in the middle of the night where I have no recordings or other activity.

I have made several new install and tried to exclude the SSD and install a 32 bit Win7 – but the BSOD still occurs 4-5 min after awake.

I have updated all drivers and tried to run Verifier with no luck.

Hopefully someone can help

A:BSOD after sleep mode, error DRIVER POWER STATE FAILURE 0x0000009f

I have updated the Perfmon details - I had forgot to run the Windows Experience Index

Read other 9 answers
RELEVANCY SCORE 107.2

Hi, i keep having this issue. Anyone knows how to solve?
My minidump is https://skydrive.live.com/#cid=392FCBBA17F5ACA1&id=392FCBBA17F5ACA1%21187

A:BSOD when going sleep mode "DRIVER POWER STATE FAILURE"

Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation.

I would re-install newest driver available.

Read other 1 answers
RELEVANCY SCORE 107.2

Hello,

I left my computer on and open this morning before I left for class. When I returned, I had a BSOD, which specified "Driver Power State Failure" (I did not copy down any numbers, as I probably should have). I did a forced shut down (held the power button) and then restarted it, where it fortunately works for now.

My laptop is an Dell XPS-15, about two years old. I have not had any problems with it until now, and the past week or so it has been freezing up. I downloaded the SF Diagnostic Tool, and the zipped folder is attached.

I am uncertain what action to take next. Could someone advise me in how to fix the issue?

Thank you!!

A:BSOD after sleep or hibernation - "Driver Power State Failure"

upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.

Read other 3 answers
RELEVANCY SCORE 107.2

I have been using my asus laptop but recently started blue screening. When trying to shut it down the screen will go black, but the system lights remain on and it remains running, however irresponsive. It also began showing a blue screen with the warning "Driver power state failure".

Even after a factory reset this problem remains. Any help to figure out the problem would be greatly appreciated.

A:BSOD "driver power state failure", when shut down or sleep

Hi Chalcogen & Welcome to the forums ^_^,

I have analyzed your only dump file and a summary of that is given below :-

Code:
**************************Mon Jul 21 15:05:53.798 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for win32k.sys

*** ERROR: Module load completed but symbols could not be loaded for win32k.sys

Probably caused by : memory_corruption

BugCheck 9F, {4, 12c, fffffa800aeacb00, fffff88001e9e800}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: CODE_CORRUPTION

FAILURE_BUCKET_ID: MEMORY_CORRUPTION_LARGE

MaxSpeed: 1900

CurrentSpeed: 2395


Processor may be overclocked!
Expected Frequency: 1900
Actual Frequency: 2395
Overclock Ratio: 1.26053

BIOS Version S550CM.202

BIOS Release Date 11/23/2012

Manufacturer ASUSTeK COMPUTER INC.

Product Name S550CM

??????????????????????????????????????????????????????????????????????????????????????``


Now, since the dump file blames the "Win32k.sys" which is a Windows Component, chance of it being at fault it extremely low. Below is a list of 3rd party drivers found over your system :-

Code:
**************************Mon Jul 21 15:05:53.798 2014 (UTC + 5:30)**************************
ASMMAP64.sys Thu Jul 2 14:43:26 2009 (4A4C7A36)
atkwmiacpi64.sys Wed Sep 7 07:14:52 2011 (4E66CC94)
AiCharg... Read more

Read other 3 answers
RELEVANCY SCORE 105.2

I am experiencing an issue with my laptop where I can't allow it to enter sleep mode or else it will restart/appear to have restarted the next time I wake it up. At first I thought it might be a power options issue, but I made sure that the computer was set to sleep and not restart when I close the lid. I've checked the bluescreen viewer and the cause of the restart seems to come from a driver power state failure coming from ntoskrnl.exe+1fcc1e, hal.dll+6a37, and storport.sys+33f0.

I've already run sfc/scannow to check for damaged files and I was also able to replace them using a DISM command, so now scanning the computer doesn't run into any errors, but this driver error still persists.

Sidenote: The driver errors mainly started after I reinstalled Kaspersky onto my computer to fix some issues that I had with it. Before that I was getting a couple of kernel data inpage errors, the latest of which occurred June 1.

A:Driver Power State Failure in sleep mode

Hi M15 and welcome to the forums ^_^,

I am in the process of analyzing your dump files further. Below has been provided analysis of your dump files for Informative purposes.

Code:
**************************Fri Jun 6 04:50:12.040 2014 (UTC + 5:30)**************************Probably caused by : storport.sys ( storport!RaSendIrpSynchronous+70 )

BugCheck 9F, {4, 12c, ffffe0017919e880, ffffd00049969950}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_4_storport!RaSendIrpSynchronous

MaxSpeed: 1800

CurrentSpeed: 1796

BIOS Version V2.20

BIOS Release Date 02/18/2013

Manufacturer Acer

Product Name Aspire M5-481PT

??????????????????????????????????????????????????????????????????????????????????????``
**************************Fri Jun 6 01:42:48.219 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for iaStorA.sys

*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys

Probably caused by : iaStorA.sys

BugCheck 9F, {3, ffffe000d7f8e060, ffffd000ca5e9930, ffffe000da3955c0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_disk_IMAGE_iaStorA.sys

MaxSpeed: 1800

CurrentSpeed: 1796

BIOS Ver... Read more

Read other 12 answers
RELEVANCY SCORE 105.2

My Toshiba laptop gives the above BSOD screen 9 out of 10 times when going to sleep. I have installed the latest Win 8 video drivers but that was no help.

I have attached a couple of the minidump files.

A:Driver, power, state, failure when laptop goes to sleep.

Hi,

Bit of a messy machine there. First thing is first. Update or uninstall your sptd.sys. The installer/uninstaller does either:

DuplexSecure - Downloads

----------

Update Synaptics Touchpad driver:


Code:
SynTP SynTP.sys Mon Aug 17 14:35:16 2009


----------

Update J-Micron Storage driver:


Code:
jmcr jmcr.sys Mon Jul 20 07:39:02 2009


JMicron/Home

-----------

Update from the manufacturer:


Code:
tosrfec tosrfec.sys Mon Jun 01 02:58:53 2009
tosrfcom tosrfcom.sys Tue Jul 28 06:18:20 2009
tosporte tosporte.sys Tue Jun 16 06:48:47 2009
Thpevm Thpevm.SYS Mon Jun 29 04:15:37 2009
thpdrv thpdrv.sys Sun Jun 28 22:02:56 2009


----------

Uninstall ESET. Windows 8 already has excellent a/v protection as a service.


Code:
epfw epfw.sys Tue Jun 28 03:30:10 2011
eamonm eamonm.sys Tue Aug 02 05:33:29 2011


----------

Uninstall ancient Acronis:


Code:
tifsfilt tifsfilt.sys Wed Aug 29 08:37:29 2007
timntr timntr.sys Wed Aug 29 08:38:23 2007


-----------

Update from manufacturer:


Code:
pgeffect pgeffect.sys Mon Jun 22 05:00:11 2009


---------

Visit Intel to let it scan to update storage drivers:


Code:
iaStor iaStor.sys Thu Jun 04 21:53:40 2009


---------

Update Realtek HD Audio:


Code:
RTKVHD64 RTKVHD64.sys Tue Jul 28 09:00:05 2009


Realtek

-------
Others needing update:


Code:
tdcmdpst tdcmdpst.sys Thu Jul 30 04:39:35 2009
TVALZ_O TVALZ_O.SYS Mon Jul ... Read more

Read other 3 answers
RELEVANCY SCORE 105.2

Hi,
I've been getting persistent BSOD's when attempting to wake up my computer (Lenovo Twist u230) from sleep. I am also sporadically getting Kernal Data Inpage Error BSOD while using my computer.

My machine is Windows 8, installed from factory with a recent refresh done. SFC /SCANNOW and DISM both come up clean. All of my hardware diagnostics are also clean.

Help!

A:Driver Power State Failure on wake from sleep

Which hardware diagnostics have you done?

Please run Driver Verifier according to these instructions: Driver Verifier Settings

Just a guess at this point, but try removing Diskeeper to see if that helps.
If not that, then try removing the Citrix software to see if it helps.

Analysis:
The following is for informational purposes only.

Code:
**************************Fri Oct 11 09:56:37.534 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\101113-15578-01.dmp]
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 20:21:57.335
Probably caused by :Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck 9F, {3, fffffa80036b7890, fffff800c68d07f0, fffffa800de92610}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa80036b7890, Physical Device Object of the stack
Arg3: fffff800c68d07f0, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa800de92610, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_ACPI_ANALYSIS_INCONCLUSIVE
CPUID: "Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz"
MaxSpeed: 1700
CurrentSpeed: 1696
BIOS Version GDETA1WW (1.61 )
BIOS Release Date 09/14/2013
Manufacturer LENOVO... Read more

Read other 1 answers
RELEVANCY SCORE 104

Laptop Sony Vaio Model VPCCW1Z4E
OS Windows 7 Home Premium Service pack 1
Processor Intel Core DUO P7450.
Norton 360 V5.2.1.3, security software

Laptop starts up and can shuts down with out any problem.
If try to hibernation or standby, it take long time accessing disc then crashes. The problem only started when upgraded to service pack 1.

All drivers have been update using driver dating utility by WinZip.

Dump files & system health check report is attached.

Will appreciate any help or suggestion in resolving this issue.

Thank you.

A:Power State Driver Failure on putting PC to Sleep or Hibernation

Two issues

1-Virtally all of these were sysRelated to NETwNv64.sys Wireless WiFi Link Driver from Intel Corporation causing pci.sys to crash. I would re-install with newest driver available.
2-Your Symantec. I would remove and replace with Microsoft Security Essentials.

Symantec is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

Read other 1 answers
RELEVANCY SCORE 104

I am using lenovo G580-20150.
I know this problem have been opened a tread but the problem i dont' think it's same so i woud like to ask for some solution after listening to my problem.
I have been user of windows 8 and 8.1 for quite some time.
everything works fine for me for the windows that i currently using , windows 8.1.
including i can put in sleep and wake it as usual.
but ! since past few days i notice that my computer getting weird when i enter sleep mode (for example closing the lid)
it crash... it bsod.

And it occur since the day after i installed somekind of VPN software and wiFI sharing that my friend gave me.
After that day, i can't put my computer into sleep. whenever i do that it keep crash.

at first , i thought lenovo energy management that cause the prob
so i uninstalled... it still makes no different , still i can't put my computer to sleep.
after that i uninstalled the vpn and wifi sharing software, it still makes no different.
But i am very sure that the vpn and wifi sharing software cause the problem.

Because before this everything works fine until that two software comes to my computer. I really need someone that able to analysis the dmp file. TQ

I willing to learn and contribute if i were given the opportunity . tq

A:Driver Power State Failure after enter sleep mode

Hi Eric & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
0: kd> !irp ffffe00175b29e10
Irp is active with 3 stacks 2 is current (= 0xffffe00175b29f28)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe00177cc0050 00000000 fffff8025f7952d8-ffffe00173c59d60 Success Error Cancel pending
\Driver\tunnel nt!PopRequestCompletion
Args: 00015600 00000001 00000004 00000003
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe00173c59d60
Args: 00000000 00000000 00000000 00000000


Now, as we can see from the Dump file analysis, "tunnel.sys" has been blamed which is the Microsoft's Tunneling Driver but since it is a component of Windows, chance of it being the culprit is extremely low. This means your guess that the BSOD are caused by the VPN Software.

On checking the Drivers, I found the SoftEther VPN installed on your system. Please uninstall it from the system and see if the system still BSOD's or not.

Let me know how it goes ^_^.

Read other 3 answers
RELEVANCY SCORE 104

I'm having a BSOD problem. After walking computer from sleep mode, within 1-2 minutes it will get a BSOD with the "driver power state failure" error and restart, but interestingly I never get the error the moment I wake up the computer. I'm using a Lenovo IdeaPad Y510P with Windows 8.1 64-bit. I already tried uninstalling the Intel HD 4000 driver, restarting computer, and installing the one on Lenovo's site (as this was suggested on the Lenovo forum as a common fix) but it didn't help. The problem only started occurring after one of the following:
- Updating Malwarebytes to latest last week
- Installing a Windows update last week (there were 3 installed components, 1 of them was an Intel HD 4000 driver update, forgot what the other 2 were)
- Updating GeForce Experience and latest NVIDIA Graphics Driver (337.88), it included NVIDIA PhysX System Software 9.13.1220
Here is a log created by WinDbg tool: 'BSOD dump' | TextUploader.com
Here is a log created by BluescreenView:
==================================================
Dump File : 060514-96281-01.dmp
Crash Time : 6/5/2014 7:23:39 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : ffffe001`218f88e0
Parameter 3 : ffffd000`bff2b930
Parameter 4 : ffffe001`2561d1c0
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+153fa0
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+153f... Read more

A:Driver power state failure after resuming from sleep mode

Hi Lan1 and welcome to the forums ^_^,

I have analyzed your Dump file and below has been provided an analysis of your dump file for informative purposes :-

Code:
2: kd> !analyze -v*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe00135b5c060, Physical Device Object of the stack
Arg3: ffffd000c3df9930, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe0013217d880, The blocked IRP
Debugging Details:
------------------


DRVPOWERSTATE_SUBCODE: 3
DRIVER_OBJECT: ffffe00135b70c30
IMAGE_NAME: usbccgp.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 52678625
MODULE_NAME: usbccgp
FAULTING_MODULE: fffff80157d82000 usbccgp
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
CURRENT_IRQL: 2
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
ffffd000`c3df98f8 fffff801`31803c1e : 00... Read more

Read other 7 answers
RELEVANCY SCORE 103.2

Hi,

Every time I try to put put my laptop to sleep, hibernate, restart it or shutdown, it stalls for about 10 minutes before giving me a Driver Power State Failure.

Having installed "WhoCrashed" and "Windbg", I was able to determine it was related to "ntkrnlmp.exe", "ndis.sys", "raspppoe.sys" and a vpn driver at one point or another. I "believe" I managed to uninstall the offending vpn driver but of course still overall have the same issue.

This appeared to occur while trying to do a windows update last week but I can't be sure. I presume, there is a out of date or corrupt driver but just can't seem to determine which one.

Many thanks in advance,

Hob

A:Driver Power State Failure on Sleep, Hibernate, Restart or Shutdown

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.
Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:
Double click the executable to open itClick on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

   Warning
Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.
ONLY install the drivers from your manufacturer!

Please remove your VPN software.

Code:
*** WARNING: Unable to verify timestamp for tap0901.sys
*** ERROR: Module load completed but symbols could not be loaded for tap0901.sys

Read other 0 answers
RELEVANCY SCORE 100.8

When I go to open my laptop back up everything comes on but the home screen won't come on. The fans run, LED backlight and keyboard comes on. I have to turn the laptop off by holding the power button then it all comes up. EDIT: I have went through the Lenovo Service Bridge and checked for updates and the only thing that wasn't updated was the solutions center so it looks like everything is up to date.Also I threw in the driver power state failure so I didn't have to open another thread. That has been going on for some time while I'm doing things and I'm not sure what to do. 

Read other answers
RELEVANCY SCORE 100.8

When I go to open my laptop back up everything comes on but the home screen won't come on. The fans run, LED backlight and keyboard comes on. I have to turn the laptop off by holding the power button then it all comes up. EDIT: I have went through the Lenovo Service Bridge and checked for updates and the only thing that wasn't updated was the solutions center so it looks like everything is up to date.Also I threw in the driver power state failure so I didn't have to open another thread. That has been going on for some time while I'm doing things and I'm not sure what to do. 

Read other answers
RELEVANCY SCORE 100.4

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 100

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 98

Hi,
I'm using a Asus UX32ln.
I've been having getting this BSOD for a while. However, I noticed that it only occurs some time (maybe 15-30mins) after i run an application using the dedicated GPU (Nvidia Geforce 840m). If only the integrated graphic card is used, it runs fine.
Thanks.

A:driver power state failure BSOD

Hi weishou,

Welcome to the 8forums.
Unfortunately your attached zip file is empty.
Please try to upload the zip file again.
Please check the minidump folder for dump files: {windows partition}\Windows\Minidump.

Read other 13 answers
RELEVANCY SCORE 98

Hi folks. I'm getting the Driver Power State Failure blue screen in Windows 7 x64. Here are my vitals:

It's an HP dv6-3052nr laptop with a fingerprint scanner.

? Windows 7 x64 Home Premium OEM - I have not reinstalled the OS since I got it from HP, and I am ok with doing that if need be.
? This is a brand new laptop, it's only like 2 months old at most
? Intel Core i7 720QM, 6GB ram
? ATI Mobility Radeon HD 5650
? No idea what the motherboard or power supply is

This is your run of the mill new laptop. I use it for web browsing and communication, but I use it as a music recording computer, so I have some music programs installed. Also, I have a USB audio interface for music recording as well.

The blue screen has happened twice in the last two days, and once a few days ago. I have been getting a popup dialog that says "Windows has recovered from an unexpected shutdown" on startup as well too; it happens after the blue screen error but it has also happened after I have closed the lid on the laptop. I think the cause is actually my fingerprint reader, because it has its own sleep/wake cycle and it doesn't always wake when I open my laptop up.

I have attached all requested files as per the BSOD posting instructions. I hope you guys can help me out! Thanks for everything.

Read other answers
RELEVANCY SCORE 98

I don't even know why this started but it did a few weeks ago. Funny, I've never had a BSOD before even though I've owned 3 or 4 computers. Anyway, this one has occurred several times and it always seems so random. It kinda seems connected to Standby or Hibernate because it usually happens after one of those two things occurs. In fact with hibernate I can usually guess that right after it comes out of hibernate, a few minutes later I will be greeted with the wonderful BSOD.

Here is the minidump. Help would be very appreciated.

A:Driver Power State Failure BSOD

Only ran the last 5 memory dumps (the 6th one was from December, so I left it out).

A couple of KB articles that relate to the errors that you're getting and the sleep/hibernate functions:

KB 975599 Stop error when you put a computer that is running Windows 7 or Windows Server 2008 R2 to sleep or into hibernation, or when you restart the computer: "0x9F"
KB 977186 Error message when you try to resume a Windows 7-based or a Windows Server 2008 R2-based computer from hibernation: "Stop 0x0000009F"

4 of the dump files blame atapi.sys (a Windows driver), while the 5th blames Apfiltr.sys (a component of your Alps touchpad drivers)

I'm not sure about the exact cause - but I would:
- check to see if the KB articles above apply to your system
- update your Alps touchpad drivers
- update your chipset/storage drivers
- update your graphics drivers

You can get the drivers from here: Select software and drivers HP Pavilion dv4-1225dx Entertainment Notebook PC - HP Customer Care (United States - English)
Please uninstall the old drivers first, then install the freshly downloaded one's.

Please post back if that doesn't stop the BSOD's.

Summary of the BSOD's:

Code:
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Fri Apr 23 21:30:31.203 2010 (GMT-4)
System Uptime: 0 days 3:05:41.747
BugCheck 9F, {3, fffffa8004c1c680, fffff80000ba2748, fffffa800834fc60}
Probably caused by : atapi.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: firefox... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hi everyone, have had a huge amount of help from this website in the past and am wondering if anyone can help.

I have a year old Windows 7 Acer Laptop. Has been performing fine, but have had a couple of Blue Screens in the past week, one of which was a "Driver Power State Failure".

Have attached the minidump files to this message. If anyone can help it would be greatly appreciated.

Thanks,
Jon
 

A:BSOD Driver Power State Failure

don't like to bump my own threads but if anyone can help, would be great help.
 

Read other 1 answers
RELEVANCY SCORE 98

Hello,

So recently, I got driver power state failure BSOD and I decided to refresh my laptop. I already updated my windows 8 but the problem still persist. I also noticed that some update fail to install when I restart my laptop. After that, everytime I turn on my laptop, my laptop freeze about 3 minute and then work normally. But if I shut down my laptop, it started to restart, but then after that I can shut down normally.

My .dmp file is attached below. Thank you for your help!

A:BSOD driver power state failure

Hi ardikur,

Welcome to the 8forums.

I see you have KMSpico, for what have you used KMSpico?

Read other 3 answers
RELEVANCY SCORE 98

OS: Windows 7 Ultimate
? 32-bit
? Age of system: 2~ years
? Age of OS installation: Two Weeks
? CPU: AMD Athlon X2 Dual-Core QL-60 1.90GHz
? Video Card: ATI Radeon HD 3200 Graphics
? MotherBoard: Not sure..
? Power Supply - brand & wattage: HP Part No.: 384019-002 Wattage: input - 100-240V~1.7A 50-60hz. output: 18.5V - 3.5A 65W (I wasn't sure which to put, so I just put everything I saw.)

After installing Windows 7 Ultimate (I had windows 7 RC before, and it ran fine), I've been getting a BSOD at random times that says:
DRIVER_POWER_STATE_FAILURE
0x00000009f

Then it would automatically restart. When it starts up again, usually it says that my system shut down unexpectedly and it asks if I want to search for solutions, but it keeps happening. The only programs that I can think of which are running at most times that these BSOD's come up are google chrome, windows live messenger, explorer.exe and microsoft word. I would appreciate any kind of solution.

A:BSOD - Driver Power State Failure

Hi -

The bugchecks on the 2 dumps -

0x9f (0x3,,,) - driver in an incosistant power state and blocking an IRP for too long a time

The Microsoft MSDL SYM site used to obtain symbol files to identify Microsoft OS componants is unable to ID the NT Kernel in your Windows system. I don't know the reason for this.

Run the System File Checker/ Repair utility -
START | type cmd.exe into the start search box | right-click on cmd.exe | select run as Administrator | type the following:

Code:
sfc /scannow
Upon completion re-boot to allow files in use to be repaired.

SFC general info - http://support.microsoft.com/kb/936212
SFC & the CBS log - http://support.microsoft.com/kb/928228

Validate your Windows OS installation at the Microsoft Genuine Advantage site.

WGA --> www.microsoft.com/genuine

I don't know how you got a 2007 driver for Avira in your system -


Code:

avgio.sys Thu Feb 22 09:57:32 2007 (45DDAF5C) - Avira anti-virus
AGRSM.sys Mon Nov 10 09:56:37 2008 (49184BA5) - Agere SoftModem Driver

There is not much that I can do with the symbol errors present.

I would suggest that you re-install Windows 7.

Regards. . .

jcgriff2

.

BUGCHECK SUMMARY

Code:

*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Debug session time: Mon Mar 15 16:40:53.697 2010 (GMT-4) ... Read more

Read other 2 answers
RELEVANCY SCORE 98

Please help, just reinstalled my laptop with xp pro sp3. now when ever i shut down or standby it gives me driver_powerstate_failure and restarts.

tell me what you need and ill supply it.

hp laptop is a dv5-1003nr originally vista but had drivers to go back to xp.

A:OMG driver power state failure BSOD

Welcome to TSF
Heres some info
http://support.microsoft.com/kb/246243
http://windowsitpro.com/article/arti...e_failure.html

Read other 4 answers
RELEVANCY SCORE 98

Hey...

I have a Dell System XPS L502X. It's a Microsoft Windows 7 Home Premium edition (64 bit) Service pack 1 and I bought the laptop this July.

I've been encountering this problem since quite sometime. I close my laptop lid to put it into sleep mode, but sometimes when I open the lid, the laptop's automatically shut down. When I press the power button and start the computer it gives me a notice "Windows has recovered from an unexpected shutdown" stating Bluescreen as the cause.
I installed the bluescreen view application and it shows that the crash is caused by driver ntoskrnl.exe and the bug check code is 0x00000009f. The bug check string column says "Driver_power_state_failure".

Attaching the minidump files and the bluescreenview results.

Please help!

101011-19702-01.zip

A:BSOD Driver Power State Failure

The driver SynTP.sys is holding up your system, which is causing the crash. This is for the Synaptic Touchpad, and the file should be located \Windows\system32\DRIVERS\SynTP.sys. I noticed it's dated from Dec 2010, which is pretty dated. Check the Dell website to see if there's an update for it, as well as your BIOS. If there isn't (as in yours is the latest), you may need to contact their tech support for on update. Sometimes the techs will have a hotfix version of the driver available for specific cases. If they ask for information, provide them the following output below. Say that this is identical in every crashdump you've provided to us.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\igarvin\AppData\Local\Temp\7zO9580.tmp\121811-19593-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c3c0?
Symbol search path is: symsrv*symsrv.dll*c:\localsymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Machine Name:
Kernel base = 0xfffff800`03466000 PsLoadedModuleList = 0xfffff800`036ab650
Debug session time: Sun Dec 18 02:59:02.104 2011 (UTC - 5:00)
System Uptime: 0 days 3... Read more

Read other 5 answers
RELEVANCY SCORE 98

Hello,
I have been getting a Driver power state failure bsod for about a week now. Some days it doesn't seem to occur that much while other its several times an hour. From googling it seems like the issue is either an out of date driver or my ram. I"ve run "whocrashed" and "bluescreenview" which point to

This was probably caused by the following module: ntoskrnl.exe (nt+0x14F9A0)
Bugcheck code: 0x9F (0x3, 0xFFFFE00101519060, 0xFFFFD0018AB69960, 0xFFFFE00106234C10)

but I guess this isn't the actual driver (or ram) causing the issue. Any help would be appreciated.

Thanks,

A:Driver power state failure BSOD

Hi jag213,

Welcome to the 8forums.

Please do the following:
Open an admin command prompt
Copy/paste "sfc/scannow" (without quotes) and press enter
When it finished reboot your system
Open again an admin command prompt
Enter sfc/scannow again
If sfc/scannow doesn't say "Windows Resource Protection did not find any integrity violation", please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

Please fill in your system specsPlease go to this site and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

Read other 10 answers
RELEVANCY SCORE 98

ah.....when i try to shut down my laptop....it just shows shutting down for 5-10 minutes and then.....bang!!!
this BSOD occurs..
and i'm not able to run perfmon /report
it says an error occurred
"can't find path specified"
Help please!!

Also,I can't connect to Internet and control panel doesn't respond on starting..

A:BSOD:Driver power state failure

Skip the perfmon /report and upload the zip file

Read other 4 answers
RELEVANCY SCORE 98

i got blue screen second time in one week, it said driver power state failure, i attached minidump file, running win 7 ultimate

Read other answers
RELEVANCY SCORE 98

hello,
is the second time (after resintalling windows 7 64-bit original copy) that my PC doesn't turn off and the BSOD - Driver power state failure appears. After that, I can't log in into windows (the computer doesn't charge windows). I have attached the dmp file. i don't know how to do to solve the problem.

thank you very much

Andrea

A:BSOD - Driver power state failure

Hi and Welcome back to SF!

This is probably driver issue. Please update the following driver

Code:
iaStorV iaStorV.sys Wed Apr 08 23:57:17 2009 (49DCD76D)
It was blamed in the dmp, the date of driver is old as well, please update it right now.
Intel Matrix Storage Manager driver


Code:
ASACPI ASACPI.sys Mon Mar 28 09:30:36 2005 (42476C4C)
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 10th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads

BUGCHECK SUMMARY:

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\TUANTR~1\AppData\Local\Temp\Rar$DI00.205\090410-1445895-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*e:... Read more

Read other 2 answers
RELEVANCY SCORE 98

Hello,

I made a thread about this already but no one would reply can someone help me please? I really want to get rid of this BSOD
I want to know what the problem is, thanks

http://sdrv.ms/14ltYEj

edit: windows 8

A:Driver power state failure (BSOD)

I'm late for work, please post back in order to remind me to follow up on this topic (I get email notification when you reply)>

Make sure that you have ALL available Windows Updates
While waiting, start with these free diagnostics: Initial Hardware Diagnostics

Analysis:
The following is for informational purposes only.

Code:
**************************Thu Aug 1 14:52:25.525 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\080113-27580-01.dmp]
Windows 8 Kernel Version 9200 MP (8 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 4:29:58.649
*** ERROR: Module load completed but symbols could not be loaded for partmgr.sys
*** WARNING: Unable to verify timestamp for amd_sata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_sata.sys
Probably caused by :amd_sata.sys
BugCheck 9F, {3, fffffa800e4515a0, fffff80017199770, fffffa800e4407b0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800e4515a0, Physical Device Object of the stack
Arg3: fffff80017199770, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa800e4407b0, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_disk_IMAGE_amd_sata.sys
BIOS Version 1503
BIOS Release Date ... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hello,

I have a BSOD problem that states Driver Power State Failure. I read it is caused by a problem with a change in the alimentation mode or something, but this BSOD really happens randomly (last time occurred while I was reading a web page... I didn't even touch a key or the mouse).

I'm running Windows 7 32bits, my laptop is 3 or 4 months old (windows 7 was already installed).

I tried to run the batch from the "Blue Screen of Death (BSOD) Posting Instructions", but no folder is created when it's done... I followed every step (also ran the batch as an admin) so I don't know where the problem is coming from. The batch runs smoothly until the end, but there is just no folder created in my Documents folder. (I don't know if this is normal, but on the line right after "We will begin in 5 seconds..." there is a message saying that "the path hasn't been found" (my os is in french, so I don't know exactly what is the original line in english) but the batch still runs to the end).

I attached my last 3 minidumps, the perfmon file and a msinfo32.nfo file.

Thanks in advance for your help!

A:BSOD Driver Power State Failure

Please follow these instructions --> http://www.techsupportforum.com/f217...ns-452654.html

Read other 9 answers
RELEVANCY SCORE 98

I have been using my new machine for a little over two weeks now. Twice I have come to sit down at the machine in the morning and the laptop display would correctly illuminate, while the external monitor would not. None of the windows on the screen were responsive to mouse clicks and the machine was not responsive to any of the keys on the keyboard. The mouse cursor would move.

Today I eventually got a BSOD:
DRIVER_POWER_STATE_FAILURE
STOP 0x0000009F (xxx1, xxx2, xxx3, xxx4)

I preserved the minidump and captured sysinfo. They are attached.

Any suggestions or thoughts?

A:9F: Driver Power State Failure BSoD

The dump file blames monitor.sys (a part of Windows Vista) - so I would suspect your video sub-system at this point. I would start with updating any video drivers/video related software on your system.

I notice that you had Visual Studio crashes - are you running any custom programs?

I would suggest running SFC.EXE /SCANNOW from an elevated (Run as Adminstrator) Command Prompt also.

Here's a list of outdated drivers on the system. I would update them also (NOT from Windows Update):

Code:
AtiPcie.sys Mon Nov 06 11:59:54 2006 - AMD PCIE Filter Driver for ATI PCIE chipset - AMD PCIE Filter Driver - Advanced Micro Devices Inc. (I think that this is most likely the problem)
mdmxsdk.sys Mon Jun 19 17:27:26 2006 - Conexant modem driver
rtlprot.sys Fri Apr 20 05:16:48 2007 - Realtek WLAN driver
tdcmdpst.sys Mon Dec 10 21:29:00 2007 - Toshiba ODD Writing Driver
Thpevm.SYS Mon Sep 03 21:13:06 2007 - TOSHIBA HDD Protection - Shock Sensor Driver
tos_sps64.sys Thu Nov 15 00:12:58 2007 - TOSHIBA tos_sps64 Service
TVALZ_O.SYS Thu Nov 08 22:08:41 2007 - TOSHIBA ACPI-Based Value Added Logical and General Purpose Device Driver
Memory dump:

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\FUBAR\TempDUMP\DATA\01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/d... Read more

Read other 7 answers
RELEVANCY SCORE 98

I've gotten the blue screen 3x in the last 24 hours. I need help. Thank you.

A:BSOD Driver Power State Failure

Hello Kincaidio, and welcome to Seven Forums.

Please read the instructions below, and post back with the need information. Afterwards, hopefully someone will be able to help soon.

Blue Screen of Death (BSOD) Posting Instructions

Read other 1 answers
RELEVANCY SCORE 98

Hi. I get Driver power state failure BSOD when putting T470s to sleep. Can someone help me identify the driver that causes this? I have dump files if needed. Kind regards

Read other answers
RELEVANCY SCORE 98

Hello,

I have been receiving BSODs after a new build. I have been holding off on re-installing the OS to see if there is a fix for this error. I suspect it may have something to do with my samsung 950 pro nvme drive.

? Windows 10 Home
? x64
? Original installation
? full retail version
? 2 weeks
? 2 weks
? I have not re-installed the OS

? Intel Core i5 6600k
? EVGA 780 Ti
? Asus Maximus VIII Heor
? Seasonic Snow Silent 750 watt platinum

Read other answers
RELEVANCY SCORE 98

hello guys,

i ve had this problem for a few months. my ntb is not shutting down at all, and today appeared this BSOD (0x0000009f) for the first time. i m attaching the dump file to illustrate the problem. can anybody help? thnks

A:driver power state failure BSOD

The BSOD was caused by Asus Charger Driver and its Likely a BSOD cause Driver Reference Table

Code:
0: kd> !irp 86ec3640
Irp is active with 11 stacks 9 is current (= 0x86ec37d0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 8a173030 00000000 846825a0-8a2f0f40
\Driver\usbhub AiCharger
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 8a2f0e88 00000000 00000000-00000000 pending
\Driver\AiCharger
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 8a2f1030 00000000 00000000-00000000 pending
\Driver\usbccgp
Args: 00000000 00000001 00000001 00000000
[ 0, 0]... Read more

Read other 3 answers