Over 1 million tech questions and answers.

Program to show you hard drive usage?

Q: Program to show you hard drive usage?

Hi everyone,
I was wondering where all my hard drive space has gone today, and I wondered if a program that could show you what was on the hard drive existed. Kind of like a pie chart of your hard drive - each segment belonging to different categories.
Does something like this exist? It would be great to know where all the space has gone so I can delete some rubbish.

Preferred Solution: Program to show you hard drive usage?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Program to show you hard drive usage?

Take a look here: SequoiaView

Read other 6 answers

My laptop is running slow and the battery drains too fast, and the hard drive just starts going constantly sometimes; it's half-full (out of 320GB), I've already cleaned up, defragmented, run virus scans with various anti-virus products, and something is just dragging it down. I can't tell if the hard drive is dying or a bunch of programs are sucking up resources (like anti-virus).

I only know how to use Task Manager, and I'm not seeing how to track usage over a day or so.

Is there something I can use? What would be the best and what are some other good ones?

(Note: I've used Process Explorer but I'm not getting much more valuable information out of it)

A:Program to track CPU/RAM/hard drive usage over time?

Well you could take a look at ProcessLasso

You'd need to configure it not to restrain some processes though.

Here's a couple of screenshots.

The most often restrained processes:

Some features are not available in the free version like this for instance:


Read other 2 answers

I am looking for a program that can show RAM usage in system tray in a way that Core Temp is showing the cpu temperature in the tray.

Do you know such a program?

A:Program that can show ram usage in system tray?

That is one of the options of Process Explorer from www.SysInternals.com

Read other 2 answers

See the picture
How can I fix this?

A:My Task Manager Doesn't Show RAM Usage each Program.

Hello RingofCola, and welcome to Seven Forums.

You can also check to see if Resource Monitor will show you this under the Memory tab instead.

Hope this helps,

Read other 6 answers

I recently used my system image disk to restore on a new (larger) hard drive but now when I look at the hard drive from the computer view it shows my hard drive as being the same size as the old one instead of being the size of the new one. I'm not sure
I'm making much sense so I will post a picture...

Is there anyway to fix this? Does the drive really only have 286 gigs on it?

A:System Image disks installed on new hard drive show new hard drive same size as old one

You have to be logged in as Admin to perform these operations.
Go to Start, and in the Search box, type in DISK MANAGEMENT. Pick the Control Panel item "Create and format disk partitions." Once Disk Management comes up, right-click on the area of your disk and select "Extend volume..." Move it out
as far as you want, making the whole thing one drive.
If that doesn't work for you, then you can download Easeus Partition Manager Home
http://www.partition-tool.com/personal.htm  and create a boot CD from it that will accomplish the same thing (and more, if you want to read up on it). It's a free program and works
with 32- and 64-bit Windows. I like it and use it myself.

SC Tom

Read other 4 answers

I cant even get to my desk top and for some reason I don't know if im doing something wrong or what but I cant get the hitman program to show up on from the usb drive in the boot menu
Moderator edit: Split into separate post

A:cant get the hitman program to show up on from the usb drive

Can you load Hitman on a different system?
When you made the USB, did you follow the instructions exactly? Any issue during its creation?
Do you have Legacy Boot option available and is it turned on?
Oh yeah, what kind of system are we talking about? I have no idea

Read other 1 answers

A while ago I read on this forum and downloaded a really good program that plots how much data programs are taking on your C drive - does anyone know what it was called? I think it is really popular and it looks a bit like a de-frag programme

It is a colorful and really helpful app....

thanks...sorry i cant be more descriptive than that!

MY C Drive is creaking under strain of too many programs but I cant give anything up.

Thanks if anyone remembers!!

A:Whats name of program scans C drive usage?


Read other 3 answers

Hi All,

I recently purchased a Hitachi Travelstar 30gb 4200RPM (used) for my Sony Picturebook C1VPK which was running a 15gb. When I went to install the hard drive the system recognized it as a 30gb so I was feeling pretty happy. Unfortunately, when I went to install a fresh copy of Windows NT, when I got to the create partition portion of the install, the system only recognized 7gb. I am a little puzzled as to how this is happening. So I decided that maybe there was a fluke so I install the OS and when I got it booted noticed that my partitioned drives only had 3gb and 4gb respectively. I am curious as to what has happened to the rest of the space on the hard drive and if it is recoverable. I should mention that my laptop does not have any external drives such a floppy or cd-rom. So that was why I was going with a fresh install of the OS by way of a USB HD enclosure from another computer. Any information would be greatly appreciated. Thanks

Make it a great day!


A:Hard Drive 30g but only show 7g

Read other 13 answers

Hi, first time posting on here, so hello to all. You guys are great, and I'm hoping you can help me.

I have a old hard drive that is dying in a computer (this computer isn't mine, I'm doing this for someone else), and I've managed to copy all the data off that drive to another drive. I purchased a new 80G Western Digital ATA/100 hard drive to replace the dying one (which is some ancient behemoth that's 8G in size). Now my first plan was to simply take out the old hd, install the new one, install the OS and then transfer the afore-mentioned data onto the new hard drive.

This plan did not work. Plugged in the new hard drive and got a "hard disk failure" message on boot up. Ran the DOS utility that came with new hd to format the drive, still no go.

Next, I took the new hd out of that computer, connected it to another computer, reformatted the drive, put the drive back in the original computer, still no.

Took the drive back out, reconnected it to my old pc, reformatted the drive AGAIN, this time as a boot drive, disconnected the hard drive that's in my old pc and booted from the new drive. Everything booted no problem. Took the drive back out, put it in the original computer, and no. Still got the "hard disk failure" message.

Took the old (dying) hd, reconnected it, connected the new hd as a slave, and tried to format it that way. The new hd doesn't show up at all. Tried running the utility provided by Western Digital, b... Read more

A:help! new hard drive won't show up

Read other 8 answers

I bought a new western digital 320gb sata hard drive. I was going to replace my old ide hard drive but when i plug in the new hard drive the bios says its only 134gb and when I try to install windows when it tries to start formatting the hard drive it says disk is not accessible. I tried booting up the old hard drive with the new sata hard drive pluged in and when windows starts it says its installing new hardware and it comes up as the correct medal and it says new hard disk but it doesn't show up in my computer. However when I got to device manager its there and it says the device is working properly. Any suggestions? or is the drive just now compatible or what?

A:New hard drive won't show up

OK first if your xp has service pak 2 you should be ok
but on safe side you need the drivers for sata controller loaded when insrtalling new OS press F6 or so then add the drivers from the disc your got from MB manufactorer
check your bios for new update may need it for to handle 48bit LBA hard drives config(very large drives)
for some reason sometimes even the great MS does not handle some drive right
3rd party drive manager I use paragon and acronis
do search here again someone just mentioned techspot link for large drive reg fix also

Read other 2 answers

my hard drive has 20 GB but it only show me 1 GB , I am not very good with technology but I know that this isn't good so, how to fix it ?

Read other answers

I just replaced my Power supply yesterday, and everything seems to be working good. I'm still pretty worried about it blowing up and making me spend even more to fix, but it doesn't seem to be going down that path!

However, I do have an issue.

My Internal Hard drive and CD rom drive now cause the "safely remove hardware" icon to show up. And they are selectable. I have an external hard drive, psp, and ipod, so I am constantly accessing that section to remove them. It is only a matter of time before i accidently select my cd rom or actual hard drive on accident.

So did I do something wrong installing the new power supply? or is this normal.

A:hard drive/cd drive show up as removable?

Read other 8 answers

I have 4 computers and 2 printers connected to a linksys workgroup switch and a linksys router. All 4 of these computers use a mapped drive to access a program from a server specifically for sharing this program. Another computer from a different state connects to the server remotely to run the program and it is blazing fast. The other four computers lock up when trying to print and perform other basic functions. I have tried connecting to the server remotely from the local computers and it works perfectly. Obviously it is the mapped drive that is bogging down the computer. At most only 3 of the computers run the program. The terminal server is a dual 2.8 ghz xeon, it's perfectly capable. Would it be possible for three users to run the program at the same time from the server while connected via the RDP? Could I create a link to start a remote desktop connection to the terminal server and load the program without the users having to make more than one click?

A:Slow program usage over mapped network drive

Yes, this should be entirely possible, i run something similar to this set up with my game servers

Read other 3 answers

Alright so I have this old maxtor hard drive that im trying to plug into my laptop. It has shown up before once or twice but now when i plug it in it makes the noise that any other usb plug in makes but will not show up in My Computer.. i have seen other help sites but i dont understand what they are saying or telling me to do.. can anyone help me get it to show up. i have stuff on it also i would like to not have to delete it.

thanks so much

A:My Maxtor Hard drive will not Show up.

Read other 7 answers

I just bought a computer a few weeks ago and I put in a 120 gig Western Digital hard disk (IDE) from my old computer. The problem is that the new drive doesn't always show up in Windows XP. Whenever I do a cold boot it won't show up. However, as soon as I restart it shows up (ie. appears in My Computer). The drive is always recognized in the BIOS, just not always in Windows. The other drive that I use is a SATA drive and it works perfectly. I never had any problem with it whatsoever when it was in my previous computer. Any idea as to what could cause this and how to fix it?

A:Hard Drive doesn't always show up

I say, try to reformat the HD (if you can). You can back it up before you format. It might solve the problem. GOOD LUCK.

Read other 3 answers

hi every one. i have an WD external hard drive that used to work perfect. now it just don`t show up nowhere in my computer. i did a lot of search , i tried many solutions : nothing.
i tried many computers (laptops and desktops) , many operating systems (xp-vista-7). it`s just not showing any where . not in my computer, not in disk management, not in device manager .
i think maybe, it`s really dead. i wanna try you guys, my last chance .
so ? any ideas ??

A:external WD hard drive never show up.

Read other 16 answers

I just installed a Maxtor Ultra ATA/ PCI adapter card. The good news is the device manager shows that it is working just fine. I have connected to it a Western Digital hard drive. The good news is that the device manager shows that it is working just fine.

The bad news is that the drive does not show up in "My Computer" so that I can use it!

When I went to "add new hardware" it (the hd) is already there. I tried to uninstall and reinstall and that went smoothly, but still doesn't show up in "My Computer." I tried the pins on the HD in single and master and it made no difference.

Help please!

A:hard drive wont show

Read other 11 answers

Hi, so I only just bought this hard drive a couple of weeks ago. (HDTP210AK3AA) Recently it had stopped working on my mac, I then tried it on a windows pc and I also plugged it into my Xbox. The Xbox it didn't show up at all, whereas with the windows pc it did show that I was able to eject it but I can not access the files that are on it.

Read other answers

I thought it would be interesting to compare everyones hard drive performances with screenshots from HD Tune utility (get from HD Tune). Maybe after some time we could produce a results table.

So heres mine:

Im going to show you the single WD Raptor X results first for interest:

And this week I received a WD Raptor 150 which I have now attached to the Raptor X in RAID 0 (128kb stripes):

This is now my current OS combined drive.

So lets see yours and how they compare.

A:Show us your hard drive performance

Here's mine, not to bad I guess.

Vista HDD
Windows 7 HDD

Read other 9 answers

I have a 1 TB Prodrive external had drive by SimpleTech that has stopped showing up on my pc. I recently moved, but I made a point not to jostle it around too much when moving. Now when I turn it on, the light comes on, and the icon in the lower right hand corner that lets me "Safely Add/Remove Hardware" still shows up, but it doesn't show up on my computer or anything like that.

When I turn it on, if I put my ear to it, you can hear the hard drive "revving." Basically, once or twice a second, you hear it power up, but then wind down. It does this for about 20 seconds, then nothing.

Any ideas?

A:My External Hard Drive Won't Show Up

Have you tried it on another computer?

Have you tried another external drive on your computer?

Read other 1 answers

my primary hard drive don't show up in my PC

Read other answers

So I was formatting my new hard drive, and then the computer rebooted during the formatting, and now nothing works, usbs, the hard drive isn't working now at all I can't do anything to it, nothing's working now basically and I have no clue where to go from here, would love to post all the specs of the computer but I'm on mobile trying to desperately figure its this out

A:Formatting now hard drive, now it won't show up at all

Can you be more detailed and specific about what you did?

Normally, you install a new hard drive inside a desktop or laptop, then you make sure it's recognized in the BIOS, then you insert the Windows install media and boot from it, then you follow the instructions to format the hard drive before the Windows install process starts.


Read other 1 answers

hi i just put xp on my comp i used a 76 raptor and i put a 320 sata2 in and when i go to my computer it doesn't show up but it does show up in device manager how to i get it to show in my computer so i can format it? can any one help me

A:geting second hard drive to show up

Read other 6 answers

My laptop HDD recently would not load windows. So i installed the OS on a different drive. Now, when i connect the old drive VIA USB 2.0toSATA it will not show up in My Computer. Disk Management will not show the drive either. The HDD is getting power, i can hear the disk spinning.

A:Hard Drive is powered, but does not show up.

Plug in and turn on the external USB hard drive
Right mouse click on My Computer
Left click on Manage
Left click on Device Manager
Expand the USB list
Find the USB device for your USB Hard Drive (the one that has no description)
Right mouse click - Uninstall
Turn off the external USB hard drive
Turn on the external USB hard drive and let it find and install the driver

Open 'Administration Tools', select 'Computer Management', click on 'Disk Management' and see if it can be seen here. If it does show here, chances are it doesn't have a drive letter assigned. If this is the case, right click on the drive, select "Change drive Letter...', and assign a drive letter to it.

If it was not seen there, go to 'Action' on the menu bar, click on 'Rescan Disks' and it should come up. If necessary assign a drive letter to as described above.

Read other 2 answers

So basically I have a 400 gb hard drive that has been working fine till yesterday.

I think it is a WD drive, it is internal.

I have to hard drives in my windows xp. The operating system is on the c drive but I added an internal drive to have more memory and use it mostly just for storage like music, movies etc. Yesterday I went to copy something from my desktop which is on the C drive into the F drive (this is the add-on drive that is not working properly) and it started copying but about half way through I got some errors and than the F drive disappeared from under my computer. I restarted the computer but I got an error stating that this is not drive plugged in to SATA 2, which was the location of the F drive. After a while passed I restarted the computer again but this time it would load without an error but once it gets past the windows booting screen the screen would go blank and nothing will happen.

I've ran the computers hard drive diagnostics and on the WD hard drive it just says fail but all the other drives and the cd-roms load fine.

The computer starts up fine with the F drive disconnected. Could it be that the F drive crashed and is lost?

Any help would be greatly appreciated.

A:Hard drive doesn't show

Could it be that the F drive crashed and is lost?Click to expand...

That's a possibility but if you haven't already, check the connections of the cables to make sure they aren't loose. If that doesn't do anything, try replacing the cable.

Read other 4 answers

Hey, I have a WD Portable 1TB Hardrive and it won't show up in windows or device manger, ive had it for about a year a few weeks ago I was unable to access one of the partitions and I was using and checking and fixing errors with CHKDSK and it froze half way through and now neither of the partitions will show, is there anything I can do?

A:Portable hard drive won't show up

Outside of trying it on a different computer, probably not. Is the drive spinning up when you plug it in?

Read other 4 answers

Evening, like title says my harddrive wont show up when I'm installing windows 7. I followed the instructions up to the select a harddrive/partition but it wont show and says that I need an installation media for it to be read.

I assume this would be where I need a RAID file from my usb but where would I be able to find/download one from?

Laptop in question is a
Satelite L555-S7916
3 gb RAM
has a 500gb WD Scorpio Blue

Is there anything in particular I need to know or should put down to hep?
I'm at a total lost and dont want to do anything dangerous to my laptop.

Any help would be appreciated, thanks in advance.

A:Hard drive wont show up

These two great tutorials should help.

SSD / HDD : Optimize for Windows Reinstallation
Clean Install Windows 7

Read other 9 answers

Hello everybody,

I am using an asus X52JE with windows home premium *64bit. I have an external hard drive (Lacie, 1TB) that is not recognised by this computer but works perfectly on others. I have checked every other usb port, and used another usb key that my computer recognised (so my usb ports work).

The hard drive does not appear on device manager AND on devices and printers, I can not see it anywhere, but I can hear it "run". It has no on/off button.

Could someone help me?

Thank you

PS, I have already tried this :

1. Plug in and turn on the external USB hard drive
2. Right mouse click on My Computer
3. Left click on Manage
4. Left click on Device Manager
5. Expand the USB list
6. Find the USB device for your USB Hard Drive ==> where is it supposed to be, i can not see a "lacie" name
7. Right mouse click - Uninstall
8. Turn off the external USB hard drive
9. Turn on the external USB hard drive and let it find and install the driver
10 Does it work now?

A:External hard drive does not show up

check and see if the drive is in the disk management list

in "run' box type diskmgmt.msc press enter.

if you can see the drive but no drive letter for it right click on the drive and give the drive a letter.

Read other 3 answers

Cannot reformat it, because it's the only hard drive with my information left on it. The one it came from was totalled and there's no way to back it up.

On startup, it recognizes that the hard drive is in. But it doesn't show up on My Computer.

A:Second Hard Drive Doesn't Show

Read other 16 answers

Cannot reformat it, because it's the only hard drive with my information left on it. The one it came from was totalled and there's no way to back it up.

On startup, it recognizes that the hard drive is in. But it doesn't show up on My Computer.

A:Second Hard Drive Doesn't Show

How are the jumpers set? . . where is it connected on the ide cable?

Read other 13 answers

I just built a computer and I have a 64GB Crucial M4 SSD as my primary drive and a 500GB WD Caviar Blue as my secondary drive. The issue is that Windows 7 doesn't recognize the WD Caviar Blue, only the SSD. Both the BIOS and the Device Manager recognize the WD Hard Drive it just doesn't show up in Windows 7.

A:Second Hard Drive Doesn't Show Up

Does it show up in Disk Management?? Can you assign a drive letter to it there?

Read other 9 answers

So I have an 2TB WD external hard drive that won't open on my comp. Part number: WDBAAF0020HBK-01 It shows up in disk management, but not in Explorer. Anyone have any ideas? I have tried to convert it to a Dynamic disk, but it won't do it for some reason.

A:WD hard drive won't show up in Explorer

Has this problem just started to happen or is this a new unformated drive?

Read other 22 answers

Can some one help me? I am tring to get the external hard drive to reconize on the pc. It is a simpletech 500gb and the computer is a dell inspiron b130. It worked on XP but now that i upgraded to vista it wont work. I called simpletech and they told me that the USB ports must not be working. I know that this is wrong because it tries to install the drivers and it says that it cant find them. I tried the fix that was posted in the earlier threads and i could not uninstall the USB controlers. For some reason when i went to uninstall them they would reinstall. I dont know where to go from here and am getting frustrated. Any help would be great. Thanks!!

Read other answers

Ok, painful question here. What am I missing? 2 1/2 year old Dell crapped out, Hard drive failure of complete and utter magnitude. Ok, so had to get a new hard drive. Did so, installed it, but didn't have the OS CD that came with it, because it was one of those "never need to make a backup disk of your OS again" piece of cardboard that comes in the package. Should never have believed Dell.....what was I thinking.... anyway.. So, I found another windows xp os disc, put it in, got it loaded, got everything working. Of course, windows recognized that this was not an authorized version, as the os had been installed in another computer that was getting updates, yadda yadda. No sweat, needed to get me an update anyway, so decided I might just buy a leftover Vista Business complete (not an update) and start fresh. Well first, I hate Vista, but that's another story. Anyway, loaded Vista Business as a fresh install, works great. Rebooted it after the windows updated itself, and presto chango, the hard drive is not recognized at all, no way, no how. I've tried booting from cd, but it just doesn't matter if it can't read the hard drive. It keeps coming up with that issue. What did I do wrong?
Thanks in advance!

A:Hard drive doesn't show up in BIOS

The most common cause of a hard drive not showing is that the cable is loose. Disconnect the data cable and reconnect it, making sure that it is fully plugged in. Test.

You may, also, have disabled the drive controller(s) in the BIOS setup. Enter setup and select "Load Defaults", save and exit. Test again.

Read other 2 answers


Left home for the day and when I came back my H drive letter was missing, there is just a blatant blank spot where it used to be... is there any way I can get it back? I hope to god I haven't lost the info on it.

A:Hard Drive Letter Doesn't Show Up!

Things that cause drive letters to go missing -

Drive letter conflict with another drive

Disk Compression

Tweak UI

Partition Magic

BIOS Configuration

Norton Go Back

Look HERE to use Disk Management,and look HERE for the other options.

Read other 2 answers

So my external Seagate hard drive wont show up when I plug it into my macbook pro. The hdd blinks when I plug it in, and while plugged in, disk utility will not launch. I formatted my hdd a while back to exFAT, thinking it would help since I switch between windows and macs a lot, but for some reason it will never load. I have tried using Terminal to mount it as well. After typing in the proper commands and waiting as it runs, I get "Volume on disk2s1 timed out waiting to mount"

What do I do?

PS- there is a corresponding picture of the failing disk utility

A:(Mac) External Hard drive Won't Mount...or Even Show Up

Read other 9 answers

hello everyone ^^

i have a problem with my second hard drive. my main/master hdd is a MAXTOR STM380215AS ATA with windows 7 and my second/slave it's a ST3250319AS ATA 250GB (i think T.T) windows XP Professional
My second HDD it's newer then my maxtor(3-4 years) but the Seagate sometimes will not show on bios or anywhere else.this happened several times since i got it..
how i solved the problem till now ?... plunged and unplugged the drive and rebooted several times,,or tried to get it back by forcing the reinstallation of his windows(this worked ) but i cant use that now..i cant get him to show up to move my data( it's very important so i can't delete it) and i know that you can reinstall without deleting the data from a second partition but it's not my case cuz my data is in the windows partition ( it's not my idea lol i had to share the drive with my husband and i got the C: T.T)
anyway are there any other solutions beside to reformat it?
also i switched the cables between the 2 drivers ... didn't work

thank you for reading .


A:Second Hard Drive doesn't show up in BIOS...(again)

Hello Tsuki have you tried looking in DISKPART to see if the drive is actually listed?

Click on the Strat button type in cmd > right click on that .exe at the top > run as admin> it will open with a black window let it settle for a few seconds then type DISKPART
then type LIST DISK hit enter and it should show you a list of the drives you have in the machine.

How much data do you have on the slave drive? and is it important?

Read other 4 answers

Hello, I am having a problem and I can't seem to find help anywhere. I have 3 DVD-ROMS, 1 CD-ROM and 2 Hard drives in my computer. One of the hard drives is split into 2 partitions. The computer was built in January and everything worked fine until about a week ago. I have no idea what happened but for some reason, 2 DVD's and 1 partition of the hard drive will not show up in my computer. Everything shows up in the device manager and in the bios. I can even access the hard drive partition from a shortcut I had made. The DVD drives show up in Nero and DVD Decryptor and I can even burn with them. I can't access the cd's though because the drives don't show up in my computer. It's just really strange. Computer Info:

ASUS A8V Motherboard
SIL 0680 ATA 133 Raid Card
AMD 64 Bit 3500
XP Pro with SP2
1 Gig DDR Ram

Any help will be appreciated.



A:DVD-ROM and Hard Drive Partition Don't Show In My Computer

unplug 1 rom at a time and test it
ribbon cable and power leed
whats your power supply situation?

post back

Read other 1 answers

I have been trying to fix this laptop for a friend of mine,but now I can't get any reading from the hard drive. its an IBM560 thinkpad. I was just wondering if there might be a setting somewhere on the motherboard that I might have missed. Does anybody know anything about these? I do know it use to read.Thanks Rita

A:Help hard drive doesn't show in laptop!

Read other 6 answers

I have a CipherWave 2.0 500GB external hard drive thats been working perfectly for 8 moths now. The Hard Drive runs with a power supply.

My PC specs:

HP Pavillion dv9700 notebook PC
Intel Pentium Dual CPU T2330 @ 160 GHz
RAM 2.5 GB
32-bit Operating System
Vista Home Premium

I recently bought some more RAM for my PC and since then I cant get the hard drive to show anywere. The technician at the PC hardware shop installed the RAM and we booted up the PC there and it worked perfectly. When I got home my PC didnt start correctly and I follwed the steps of restoring and booting the PC safely. My PC works perfectly, but my HD doesnt show anywere.

Device Manager shows that there is a USB mass storage device, but My Computer shows nothing All I have is the icon in the bottom right tray that shows an external dive that can be removed safely. Disk management also shows no new Hard drive, just C and D.

I treid all the suggestions I could find on the net, but no succes. The HD was picked up on another PC running on XP, but only temporarily.

I tried all my usb ports and updated all the drivers.

I dont know what to do!
Please help

A:External Hard Drive does not show Anywere

I just purchased a Lacie Little Disk 250GB 2.0 usb external hard drive.
My vista computer found the new hardware right away but my Windows XP did not. The XP always recognizes thumb drives so am not sure what the problem is. It doesn't show up anywhere. I needed it more for the XP than I did the Vista Computer.
Help please!!!

Read other 1 answers

i installed win7 on my SSD (like 22gb drive) in my asus today. Now, under my computer, it shows nothing but the SSD. it doesn't show my 500gb hard drive.. Im pretty sure its because of something i didnt do in the setup..
What should i do to get it to show up? i really really really don't wanna re install windows because i got all the drivers and installed programs..

A:Hard drive doesnt show up under My Computer?

Hi there jagwar.There was probably no drive letter assigned to the HDD.Go to disk mamagement,right click on the on the 500 drive and under "change drive letter and path",assign one to it,should be fine.That is,you are sure that the sata cable is properly seated,power cable as well and you are not "hiding"the drive by any way.Post back!

Read other 11 answers

Got a LaCie External HD from my school. It works fine on Mac but I can't access it on windows. Is it formatted to Mac? How do I unformat it? WHY CAN'T IT BE USED ON BOTH DAMNIT!? Ughh..anyway. If anyone needs any additional info, just ask. I can see it in my Device manager, but can't access it.

A:Solved: External Hard drive won't show

Read other 9 answers

hi people, i jsut bought a sata maxtor 160 gb hard drive about an hour ago. av popped it in my pc its recognises it in bios on load up, however it wont show up in windows. when i go to control panel/admin tools/computer management its displays the secondary hard drive as not iniialzed, and not allocated. what does this mean, how can i get this bad boy working!!

some one plz help

A:slave hard drive wont show up

Have you tried formating the drive through a setup disk or through a program like partion magic?

Read other 6 answers

Hi Team,
kindly help me to unlock the bitlock drive 
anil B

Read other answers

My external 1gb USB hard drive works on several windows 7/8/10 laptops. It used to work with this particular Windows 10 laptop, but has stopped. Other external USB hard drives still work on this laptop. When plugged in, it shows up as ADplus SuperVer USB Device. It is a 1 Gb drive. On the laptops where it works, it shows up as 931.51 Mb NTFS Primary drive.

On this laptop, it shows up as a 1386.25 Mb drive - with 3 partitions - 867.16 Unallocated, 259.48 Primary, 259.61 Primary.

I can read/write to the drive on other laptops without any problem.

Read other answers

I know little about SMart data only that it doesn't always tell in time your drive is failing but that when it does mention something is wrong it should be taken serious right?

So you be the judge.

I used two different smart readers to be sure that the info shown is correct.

So is my windows drive in good health or not?

A:Do I need to buy a new hard drive? S.M.A.R.T show some disturbing info

Because both programs report good I wouldn't worry about them if they were my drives.
You could test them with the manufactures test program.

Read other 7 answers