Over 1 million tech questions and answers.

Power Outage during disk check??

Q: Power Outage during disk check??

I was running disk check for Windows 7, and the power cutout due to a neighborhood issue....
I am curious if this is going to mess up my system or not??
Please respond with helpful, adult replies, and thanks in advance!!

RELEVANCY SCORE 200
Preferred Solution: Power Outage during disk check??

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Power Outage during disk check??

It shouldn't, Does your computer start back up? Have you tried running diskchk again?
SSD or HDD?
More info would help a great deal.

Read other 1 answers
RELEVANCY SCORE 92.4

I was running disk check for Windows 7, and the power cutout due to a neighborhood issue....
I am curious if this is going to mess up my system or not??
Please respond with helpful, adult replies, and thanks in advance!!

A:Power Outage during disk check??

It shouldn't, Does your computer start back up? Have you tried running diskchk again?
SSD or HDD?
More info would help a great deal.

Read other 1 answers
RELEVANCY SCORE 74

Hey,

Apparently I fell asleep in front of my computer around 1 am (<.<) and when I woke up around 3 or 4 am, the power was out. I turned off the switch on my psu and just went to bed.

I just got up now and saw the electricity was back, so I turned on my PC. It said windows was not shut down properly, so I just went about starting Windows normally and didn't receive any errors afterwards. I restarted it a couple times, then powered down completely, turned off the switch again, and then discharged the motherboard's capacitors.

My question, I know power outages can be pretty damaging. Do you have a checklist of things I should check for, in terms of damages?

When I fell asleep in front of the comp, the only program running on the computer was an instant messaging app, so I'm pretty sure the HDD should be fine, but I will be running Drive Fitness Test/Western Digital Lifeguard, but I'd really like to know if I should run any other tests or procedures to see if any component (from the psu to the cpu) was damaged in any way.

Any tips are appreciated
 

A:Power Outage, What Components Should I Check?

If it boots up fine when you turn the machine on then you may have been lucky and no damage has been caused. The most obvious cause of damage after a power surge would be the machine not booting, or creating errors and crashing.
 

Read other 1 answers
RELEVANCY SCORE 74

Plz forgive me if this isn't the right forum to post this question.Its both a hardware and software query..

I recently re-verified the Novice part in my name wherein I accidentally flipped a switch that controlled the outlet that my power strip was on.. and made an ever dumber mistake by quickly flipping the same switch back "on."

My desktop is connected to a power strip, a pretty old one, that's suppose to act as surge protection.

I tried to start the desktop back up, but it was clear that the while the PSU was fine, the hard drive and the Mobo seemed to be experiencing difficulties. The screen was just blank with little to no indication of life. I manually turned off the desktop and restarted it twice in the same fashion. When nothing came up, I turned off the PSU to dissipate any remaining charges.

After turning the PSU again, the mobo (asus) finally reappeared and everything loaded, including the OS (XP Pro). Firefox reloaded everything from cache, so apparently nothing (software wise) seemed askew. I did notice the Quick Launch bar was missing, so I'm guessing my windows profile might have been affected slightly..

My question - aside from Window's HD error check (full 5 out of 5, the type that runs before the OS loaded) what other check-ups should I do to test if my desktop was damaged by my accidental self inflicted power outage?

Any hardware checks? Software-wise? OS-wise?

p.s. if it makes any difference, my PSU is a thermaltake W01... Read more

Read other answers
RELEVANCY SCORE 74

Just got power on, when somebody looks at the log please give me the good, bad, or boring news, thank you.

Heres the log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:44:10 AM, on 1/10/2008
Platform: Windows Vista (WinNT 6.00.1904)
MSIE: Internet Explorer v7.00 (7.00.6000.16575)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\system32\taskeng.exe
C:\Windows\Explorer.EXE
C:\Program Files\Trend Micro\AntiVirus 2007\tavui.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\hp\support\hpsysdrv.exe
C:\Program Files\Hewlett-Packard\On-Screen OSD Indicator\OSD.exe
C:\Windows\RtHDVCpl.exe
C:\Program Files\HP\HP Software Update\hpwuSchd2.exe
C:\Program Files\Java\jre1.6.0_03\bin\jusched.exe
C:\Windows\System32\rundll32.exe
C:\Program Files\Zune\ZuneLauncher.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Windows\System32\rundll32.exe
C:\Program Files\Webroot\Spy Sweeper\SpySweeperUI.exe
C:\Windows\ehome\ehtray.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Program Files\Kodak\Kodak EasyShare software\bin\EasyShare.exe
C:\Windows\ehome\ehmsas.exe
C:\Windows\system32\wbem\unsecapp.exe
C:\hp\kbd\kbd.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Internet Explorer\IEUser.exe
C:\Program Files\Common Files\Microsoft Shared\Windows Live\WLLoginProxy.exe
C:\Program Files\Trend Micro\AntiVirus 2007\TAVScan.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,S... Read more

A:Little check-up after power outage (HJT LOG Included)

Alright some more paranoia of what I have seen through the history of others using this computer drag me to post yet another Hijack This Log, I know by now people must be getting sick of it, but so am I, so after this Log I will do something to try and reduce the amount of check-ups I give you guys, I apologize for any thing my paranoia is getting in the way of. Heres the log:
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:07:19 PM, on 1/11/2008
Platform: Windows Vista (WinNT 6.00.1904)
MSIE: Internet Explorer v7.00 (7.00.6000.16575)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\taskeng.exe
C:\Program Files\Trend Micro\AntiVirus 2007\tavui.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\hp\support\hpsysdrv.exe
C:\Program Files\Hewlett-Packard\On-Screen OSD Indicator\OSD.exe
C:\Windows\RtHDVCpl.exe
C:\Program Files\HP\HP Software Update\hpwuSchd2.exe
C:\Program Files\Java\jre1.6.0_03\bin\jusched.exe
C:\Windows\System32\rundll32.exe
C:\Program Files\Zune\ZuneLauncher.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Webroot\Spy Sweeper\SpySweeperUI.exe
C:\Windows\ehome\ehtray.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Program Files\Kodak\Kodak EasyShare software\bin\EasyShare.exe
C:\Windows\System32\rundll32.exe
C:\Windows\ehome\ehmsas.exe
C:\Windows\system32\wbem\unsecapp.exe
C:\Program Files\Internet Explorer\ieuser.exe
C:\hp\kbd\kbd.exe
C:\Program Files\Trend Micro\An... Read more

Read other 1 answers
RELEVANCY SCORE 73.2

Apparently I fell asleep in front of my computer around 1 am (<.<) and when I woke up around 3 or 4 am, the power was out. I turned off the switch on my psu and just went to bed.

I just got up now and saw the electricity was back, so I turned on my PC. It said windows was not shut down properly, so I just went about starting Windows normally and didn't receive any errors afterwards. I restarted it a couple times, then powered down completely, turned off the switch again, and then discharged the motherboard's capacitors.

My question, I know power outages can be pretty damaging. Do you have a checklist of things I should check for, in terms of damages?

When I fell asleep in front of the comp, the only program running on the computer was an instant messaging app, so I'm pretty sure the HDD should be fine, but I will be running Drive Fitness Test/Western Digital Lifeguard, but I'd really like to know if I should run any other tests or procedures to see if any component (from the psu to the cpu) was damaged in any way.

Any tips are appreciated
 

A:Just had a power outage, any advice on how to check for damages?

closing thread, please do not create duplicates.

respond at http://forums.techguy.org/hardware/949071-power-outage-what-components-should.html
 

Read other 1 answers
RELEVANCY SCORE 72.4

PC was running great.  Dog tripped over cord and unplugged it while it was running.  Now won't boot.  I had just run a chkdsk and everything was fine...no bad sectors, etc.  Now get error message "Hard Disk Short DST Check: Failed"  Cannot get boot sequence to go to my USB recovery to try to recover.  I suspect damage is to boot sector and not to the actual hard disk.  How can I get the PC to boot from the USB?  Failure ID: 60DPTG-0087D-9XPJXF-60QX03.  Is this drive 'shot' or can it be recovered AND can it be recovered with all my files still intact?  Please advise.  Many thanks.  

Read other answers
RELEVANCY SCORE 71.2

I was in the middle of encrypting my hard drive (Around 80% done) when power went off. When it came back on, I tried booting the machine and it asked for a pw, I entered the one I had set during the encryption process but it rejected it. Is there any way of restoring the drive without losing any of my data? The machine has Windows 10 Pro on it.

Thx

Read other answers
RELEVANCY SCORE 58

Hi everyone

I recently done a manual check disk on my dell inspiron and unfortunately i had a battery failure
halfway through now my computer will not load my windows 7.
I have tried rebooting through my exteral hard drive where my computer is backed up but it has not
work.The windows 7 logo graphics comes through and stop and my computer goes to a blue screen
what i can not read because it only stays on the screen a second.
I have completed a full diagonstic test everything pases except my hard drive.

can someone please help.i have only had the computer 3 months

much appreciated in advance

mitiemick

A:check disk power failure

How to run chkdsk or System File Checker (SFC) from the Recovery ConsoleBoot your Vista or Windows 7 installation DVD
When you see "Press any key to boot from CD or DVD", press Enter
At the "Install Windows" screen, click on Repair your computer at lower left
At the System Recovery Options screen, make note of the drive letter assigned to your boot drive (normally C: ) and click Next
At the Chose a Recovery Tool window, click on Command Prompt. You will be sitting at X:\Sources directory
Run chkdsk or SFC
If you did not note the drive letter of your boot disk, you can enter bcdedit and look at the osdevice line to see what it is.
For chkdsk, type chkdsk c: /r and press Enter (use the letter from above if not C: ).
For sfc, type sfc /scannow /offbootdir=c:\ /offwindir=c:\windows and press Enter (use the letter from above)
Let either run to completion undisturbed.

Vista or Windows 7: If you don't have a install DVD, you can download a legal copy here:
Windows 7 Direct Download Links
Windows Vista Direct Download Links

Make sure you get the same version you have installed: 32 or 64 bit; Home Premium, Pro or Ultimate.

Read other 2 answers
RELEVANCY SCORE 56.8

My power went out for ten seconds yesterday, and when my desktop computer re-booted, I got a message saying drive D (hard drive) had to be checked for disk consistency. It passes the test and the desktop appears. Then the whole computer freezes. Does anyone know how to resolve this issue? Once the desktop appears, the whole computer freezes so I can't access anything.....

A:Check disk consistency after power failure, freezes

I suggest trying to boot into safe mode.

If successful, then initiate a chkdsk /r on the boot drive.

Start/Run...type chkdsk /r (with space between k and /) and hit Enter.

Type Y in response to onscreen message and hit Enter.

Reboot the system. The chkdsk /r will run before the system boots to the desktop. After the chkdsk /r has completed, the system will boot into XP automatically.

Louis

Read other 15 answers
RELEVANCY SCORE 56

Hello!I have a K320 model that is completely dead after a power outage at home. The unit will not show any inidcation of power now. I went and bought a new power supply and installed, but still I get absolutly nothing. I had 3 wires that wwere connected to the front panel to the old power supply, but the replacement supplyI purchased doesnt have this connector. I believe it was for the LED's on the front panel, which at this point do not matter.I am not sure if there is an issue with the power siwtch/board, or an issue with my motherboard....or if those 3 wires are critical?Any suggestions??Thank you!!

Read other answers
RELEVANCY SCORE 54

How does a power surge affect a computer? I have my computer plugged in to the surge protecter along with the printer, speakers and monitor. The surge protecter was working properly as always but my computer will not turn on. Everything else plugged in is working. Any advice to a novice? My son built the computer a couple of years ago and is going to go over it to see what damage there is. Is there any hope the motherboard is okay and the hard drive?
 

A:Power outage!!

Try resetting the power strip (there should be a button on it somewhere). And, moving the computer plug into another outlet.

If your computer will not turn on, it could be a number of things: power supply, motherboard, processor, etc.

You could open up the case and see if there's a funny smell to find out if something really did burn out. If no smell, then look at the motherboard, there should be a battery there. You could reset the CMOS by taking out the battery (and on some motherboards, moving a pin on the board).

To find out how to reset the CMOS, take a look somewhere on the motherboard as to ID the make and model of it.

Make sure you're grounded to prevent static damage to your computer parts.
 

Read other 3 answers
RELEVANCY SCORE 54

I had a storm blow over overnight and the power went out at least once. I awoke to my computer powered on with a black screen. Unresponsive. I shut it off(waited the obligatory 15 seconds) and started it up again. Windows 8.1 began loading but when it would normally take me to the login screen, a brief blue screen of sorts came up with a ;( face and the system rebooted itself. This time it said something like "Preparing Automatic Repairs" on the windows loading screen. It did that for a while, rebooted, and took me back to that error screen. I allowed it to do this multiple times and was never able to boot into windows.
I fear there has been some hardware damage(yes I know, get a UPS... ).
I put my windows 8 DVD in and managed to get it to load from the disc. I tried a couple of the repair options(couldn't tell you which) but they just sat at the screen for a long time, seemingly doing nothing. I knew I wouldn't be able to retrieve my files most likely(but my last backup was beginning of October so not a huge loss) so I just went ahead and tried a fresh install of windows. Again it sat there seemingly doing nothing but I let it be and eventually, after many of those long waits after selecting the options I wanted, it managed to install win 8.
Win 8 loaded up fine and I began the long and excrutiating task of installing the windows updates. This too has given me problems(downloads failing, installations failing) and where I'm at now, it is in some kind of loop where it tries ... Read more

A:Power outage

I encountered a similar failure but was not induced by a power fault.  The interface chip/buffer for the SATA drive has failed and is intermittently  writing garbage.  This is a MOBO failure.  A new drive won't solve the fault but is the only way to proceed to a resolution.

Read other 6 answers
RELEVANCY SCORE 54

My trouble is that I gave my older computer to one of my granddaughters yesterday and had it all up and running for her had a wireless card put in and she was off and running. Today she called and told me that a fuse blew and now it will not boot up only showed a blue screen saying(Do to power outage your computer is not starting up). She is so upset and I,m at a lost as to how to solve this. Any help would be welcomed
Simbadone
 

Read other answers
RELEVANCY SCORE 54

Hello people- I have a problem that I hope you can give me some guidance on.
My computer every now and then TURNS off-- and noone is pressing the power button. So I came home from work and pressed the power button and nothing happened-- so i changed the outlet the tower is plugged into and still nothing-- I then opened the tower and played with a few wires- not knowing what i am doing-- then I changed the battery in the middle of the board as well(the round battery)-- and still nothing-- So I went on the phone to call HP- and after my phone call, I pressed the power button again and the computer turned on???? WOW- the twilight zone??-- So my only question to you- is can it be the power supply??? and if it is-- would it do this type of shutdown by itself- like can the computer work even with a faulty power supply---or can it be something else-- because as we speak now-- the computer is working fine??? What do you suggest I do---
I also leave the computer on everyday and all day forever--- I never turn it off- is that something I should be doing- or should I turn it off when not in use at nights??/ Please give me some type of advice- so i know how to proceed.. My computer is the HP P6140f pavilion (i KNOW- it is quite old- about 10-11 years old)-and I am working on Windows Vista- yes Vista-- but that also is working really great- I actually love it- never a problem---so besides the age- i have given you the problem I am having--so please look into your crystal ball and l... Read more

Read other answers
RELEVANCY SCORE 54

Woke up today and realized that the power had went out. Went to start up the computer and it took me to the screen where I can choose to A) Start in "Safe Mode"
B) Start Normally
C) Start with last known working config

I tired all of the choices and everytime the "Windows XP loading" page came up right before it usually goes to where I can log in. Right before it would hit the "Log In" page it shows the blue screen of death for a second and then kicks me right back to the screen with the start up options. Its a cirlce I can't get out of, PLEASE HELP.
 

A:Power Outage?

Read other 12 answers
RELEVANCY SCORE 54

Hoping someone can help. My printer/scanner/copier Brother DCP J-315W was on when the power went off during the recent Sydney storms. The printer is about 3 years old and connects wirelessly to the PC. The power went out at 12.30 am so I just went to bed and when I woke up everything was back on except the printer which has no power. I have tried pulling the plug out of the machine and waiting 15 seconds, and trying to reboot the pc, modem and printer together but had no success.
It seems dead. Do I need another printer or is there a solution?
 

A:Printer won't power on after power outage

No surge protection? Power outages from storms can cause no damage or high damage to electrical/electronic circuits. There may be a blown fuse inside, but it sounds like it is time to buy a new printer
 

Read other 2 answers
RELEVANCY SCORE 54

Hello. I have a computer I picked up from Fry's that has a K7 FSB266 motherboard, 1GB of memory, and an AMD Athlon 1800+ processor. This is the second motherboard I have put in this thing, as the first one suffered the same malady that I need help with. The motherboard is a Model M811 ATX style.

The other night we had a power outage for about 2 hours. All my computers were powered down, except one. I powered all of them back up and they worked as per normal except the one I reference above. This one was off during the outage.

Now it will not power back on. The same thing happened with its predecessor board which is why I replaced it. Am I missing something? Is there some sort of magical reset that I can't find? Why would this computer be the only one with a dead motherboard after the power was back on? Is there a flaw in its design? What brand should I go with if this thing is junk?

Any help would be appreciated.

Thanks
Steve1
 

A:K7 motherboard will not power up after power outage

Steve1 said:



Any help would be appreciated.

Thanks
Steve1Click to expand...



Hi I have a PC that does the same thing, I think its the PSU, if I remove the mains cable for about 2 minutes, then replace it, the thing powers on OK, I really must get round to sorting it out soon...
 

Read other 1 answers
RELEVANCY SCORE 53.2

Hello,

With the hurricane rolling through we experienced a few outtages last night and i forgot to shut my computer down before that happened. And now due to that i am experiencing issues with getting to my desktop screen. Let me explain into detail. When the computer starts up it goes into windows recovery giving me two option " Start windows recovory" and start windows normally. I have tried starting windows normally but all that seems to happen is that the computer turns off and puts me back to the two options. So i tried the first one and that brings me into a menu saying select a driver which non appear so i just skip it and than brings me to 6 options i believe. before i go any farther this is all coming from the top of my head as i am not starting at my computer writing this. Anyways the first option gives me the chance to do a automatic repair but they do not seem to find any issue or unable to fix the problem. tell me to restart but nothing changes and i am just repeating steps over and over. the other options are faint in memory command prompt is there and a few others but they are to no help. I am hoping someone can address this issue as i have work on the computer. thank you.
 

A:Power Outage Can't start up

Read other 6 answers
RELEVANCY SCORE 53.2

Today we had a brief (3-second) power outage. The computer is plugged into a pretty decent surge protector, but it is not booting Windows now. I have XP SP3.

The computer will boot through the BIOS screens, and then I get the "your computer shut down unexpectedly, would you like to start in Safe Mode, Last Known Good Configuration, etc" menu. If I choose "Start Normally" or "Last Known Good Configuration" the computer will show me the XP splash screen with the little blue status bar moving along. Once that finishes and it goes to where you would usually see the welcome screen, you just see black.

If I choose to boot in safe mode, it boots up and will go into the welcome screen where I can login to XP. Once inside, I see all of my desktop icons and programs, etc. If I try to use my external HD (to copy some not-yet-backed-up files, I get an error saying "H:\ is not accessible. The request could not be performed because of an I/O device error."

There's nothing too terribly important on the computer, but a lot of stuff that would be a pain to lose (I'd have to re-rip a bunch of CDs and download a bunch of apps, etc).

I tried a system restore to an earlier restore point, but it didn't fix the problem (although it did say "restore successful" once I got back into Safe Mode again).

Does anyone know of any ideas? It's odd that it will boot into safe mode with no problems, but not into regular mode. Thanks for any ass... Read more

A:Power outage - XP won't boot now

Unit Twentyfive hello and welcome to TSF. See if this will help http://www.techsupportforum.com/f10/...rt-223275.html.

Read other 2 answers
RELEVANCY SCORE 53.2

Dell 2550 with XP Home SP3.
Worked fine until power outage. Now it will boot past splash screen, but gives error message offering several options: SAFE, SAFE with COMMAND, LAST WORKING...etc. None actually loads WINDOWS. The best option is SAFE with COMMAND, but that only loads dozens of .sys files and then stalls.

Can read BIOS, changed boot sequence to boot from CD

CD player works, and when XP INSTALL disc runs, I get "WINDOWS SETUP", and at the bottom of the bluescreen, I see dozens of WINDOWS files loading, but this too locks up and nothing happens.

Stumbled upon a DELL diagnostic option and ran all the tests( took about an hour) and I got one error message:

Error Code 3B00:0788
Bootstrap checksum: expected 009Fh
returned 001Ah

Since I have no idea what that means, I am hoping someone here does.

Thanks

George

A:XP will not load after power outage

Hi .

In my limited experience...checksum errors are generated only when my CMOS battery is running down and needs to be replaced. But generally they indicate a problem in the BIOS, IMO. But that's on PCs, not servers.

The Dell Poweredge 2550 is a server, which (IMO) makes it unlike a PC.

I would not necessarily assume a CMOS battery is bad, I would suspect the BIOS itself may be adversely impacted by the power outage.

Have you tried resetting default settings? Are the CMOS settings accurate in the BIOS?

Louis

Read other 2 answers
RELEVANCY SCORE 53.2

Win7,HP Pavilion6000,64-bit. After 10-second power outage, monitor came back on showing a window indicating Malwarebytes and Norton360 were turned off; no Internet access. I turned the computer off and restarted, the Internet came back but Malwarebytes and Norton still showed as turned off. I did a system restore back to yesterday, May 10. After rebooting, Malwarebytes was back on but not Norton. Then, Control Panel/System and Security/Virus Protection/Turn on Now/(click)Yes I trust the publisher and want to run this program(click)..........nothing happened. Clicked Norton360 desktop icon....spinning, then nothing. I don't trust the Net without Norton, so can you help me get it turned back ON? Thank you, Elaine
 

A:Norton 360 off after power outage

Try re-installing it.
 

Read other 3 answers
RELEVANCY SCORE 53.2

I've been hesitant about asking this but since it "almost" just happened to me, what should one do if there is a power outage while defragging?
I had literally just got done defragging my W7 & had started surfing the web when the monitor went black & off as did my TV. Now if that would of happened during a defrag, would it mess up anything?
I've since restarted the W7 & turned my tv on, but still curious, thank you.
 

A:Power outage during defragging

D I S A S T E R !!!

A laptop will survive due to the battery (assuming you can run with it - - sometimes it's dead and SOL),
but a desktop will likely get corrupted.

I you live where there are frequent brown-outs (aka power outages), by all means get a UPS.

a) always run CHKDSK C: /F /R first
b) never run defrag and then go shopping (ie leave it unattended)
 

Read other 2 answers
RELEVANCY SCORE 53.2

Hello,

I am trying to solve a problem for someone who has given me the following description of the situation:

They left for 2 weeks, where there was a power surge or power out. When they came back their computer was acting funny.

They get a few errors on bootup (I have not seen the computer yet so I dont know which ones). These are the kind that show on the desktop after the system loads. They click on a link in thier favorites and it takes them to an older version of that site. When ever they try to do something online it will ask if they want to dial in a connection.


This translates to me that they don't have a working broadband connection. Any help on troubleshooting this matter?

Thanks,

-Yportne

A:Power Outage or Spyware

Quote:




This translates to me that they don't have a working broadband connection. Any help on troubleshooting this matter?




Not necessarily; they could have gotten a dialer- a program that racks up telephone bills to the profit of the creator and the telco, usually one overseas.

Read other 3 answers
RELEVANCY SCORE 53.2

i dont know where to post this but.. my power went out and my computer still turns on but i cant see anything out of my monitor... i tryed diff monitors i dont know if something burnt out or what can someone help me!!!!!!!!(Moderator edit: revised Topic Title and Description to better describe the problem. jgweed)

A:Problem After Power Outage!

If you have a power strip check the breaker button to see if it has been tripped.

Read other 1 answers
RELEVANCY SCORE 53.2

Having issues after a power outage. booted up the pc and got an error message that vista would not boot went through repair and restore. now running but cannot access the internet and get the 169.x.x.x ip. tried releasing it, manually setting the ip rebooted every thing tried new nics cables everything still the same problem. The other computers work though and can connect. mine is broke no ping nothing any advice??????

On a UPS...
tried
netsh winsock reset
netsh int ip reset
Reset switch and modem
Direct connect to modem
Still Nothing

A:no ip conectivity after power outage

hi there are a few routes here you may not have tried yet http://answers.yahoo.com/question/in...1092240AAMXVeL

Read other 1 answers
RELEVANCY SCORE 53.2

Specs:

Mobo: Gigabyte Z170-HD3

CPU: i5-6600k

Drives: 1TB HDD - general storage 250GB SSD - OS(win10 home) 500GB SSD - games

GPU: Gtx 1060 6GB - stock settings

PSU: EVGA 1000W 80 plus Gold

Backstory:

A few days ago we had a power outage and the power flickered off and on for about 2 minutes before being out for 4 hours. My Pc was plugged into a Tripplite SPROCKET surge protector (underkill I know but it was a quick option that was affordable)

Problem: I didn?t think anything of the outage since I thought I was protected but as I was in the middle of a Fortnite match (don?t judge) my screen froze and I heard almost like a power fluctuation noise in my headphones. A noise similar to what a forced shutdown sounds like if you have headphones on. The pc remains running and it won?t shutdown unless I hard reboot it, which still takes a longer than normal time of pressing the power button. Upon a very slow reboot, I can usually get back into the game for about 5-10 minutes before it happens again. The problem also happens if I?m just browsing the web, not necessarily doing graphics intensive activities.

Troubleshooting:

Memory check - nothing

Chkdsk and sfc - nothing

Windows event logs show nothing except an unexpected shutdown

Nothing in crashdumps I reverted back to a stable nvidia driver using DDU thinking maybe that was the issue but it?s still happening.

Note: my GPU is running at about 82c so that?s one possibility of an issue in my mind

I then we... Read more

A:PC Freezing After Power Outage

Try resetting the CMOS as a first option. I would check to see if there is a newer version of BIOS you can flash to and reflash the BIOS if resetting the CMOS doesn't work. You can also run a memtest on the memory make sure there are no errors. Next on the list, check your power supply by temporarily installing another to see if the problem persists. Check your "power plan" in Windows. With your power supply, you can go "high performance" with no problem.
 

Read other 1 answers
RELEVANCY SCORE 53.2

I have a linksys E1000 router. I recently had a power outage and now the router wont do anything. The lights 1-4 and the internet light blink, but the power and connection lights stay off. Ive tried doing hard resets etc. I called the cisco support and they told me that that combination of lights indicates the router is dead. This has happened about 5x now, and each time the same lights blinked, but eventually for some reason or other the router eventually started working.

Is the router dead? Is there a reason that the router is the only thing that has issues when there is a power outage? The modem and everything else plugged into the surge protector work fine. Is there any kind of router that is less sensitive to power outages?
 

A:Power Outage and Router

Read other 12 answers
RELEVANCY SCORE 53.2

My laptop computer was on during a power outage. After I reboot, the computer works but at an unbelievable slow speed. Everything it does will take more than 100 times longer. I reformat the hard drive (curiously, that happened in normal speed) and tried to re-install Win2000. I observed that during the first phase of installation, it progressed in normal speed. However, right after the window started, it began to crawl. I assumed that it has something to do with the way the win2000 preforms certain I/O function that is different than let's say DOS. Any idea what happened to me and how to fix it?
 

A:Slow PC after power outage

I'd start by resetting the BIOS to factory defaults, it sounds like something is scrambled there.
 

Read other 1 answers
RELEVANCY SCORE 53.2

I posted this in the XP forum, but I think it's probably a hardware problem.

Today my power went out and after it came back on and my boyfriend went to boot up his computer, Windows wouldn't load. After the first few startup screens, it goes black and freezes up.

When we put in the Windows installation disk to try and reinstall, it gets stuck at the "Setup is starting Windows" blue screen and won't go any further. The computer will not start in safe mode, either.

It did start up once normally in the midst of all this, but nothing was done differently before or after that time in restarting and it hasn't restarted normally since.

Any words of advice on this would be greatly appreciated.
 

A:Power Outage... can't boot

Read other 7 answers
RELEVANCY SCORE 53.2

I have been doing a lot of research on SSD. I already found a few places to ensure I make my transition proper turning off hibernation, know to change my temp drive, disable indexing, etc. However, the one thing I am not sure of involves the fact my computer has been known to... freeze... from time to time. I wanted to know if I install, and end up having my computer freeze on me, what possible issues this would have on my SSD. I have researched a lot, however, really did not get any answer to this question.
 

A:SSD and power outage issues

Read other 13 answers
RELEVANCY SCORE 53.2

I had left my computer on after leaving for school in the morning and there was a power outage for about an hour. When i returned home my computer was turned off. ( the screen was still on but black screen)And now my computer will not turn on at all? Someone told me that my hard drive fried, but I am not exactly sure. Any help will be appreciated

A:Power outage problem

If you don't have your pc connected to the mains via a surge protector that may be the case, but don't quote me on that. You can check by installing the Hard Drive in another computer possibly.

Read other 1 answers
RELEVANCY SCORE 53.2

I had a 2 second power outage today and since have not been able to boot my pc. I am given the "windows did not start successfully" screen and then I am prompted to choose safe mode, safe with networking,...ect. I have tried all options for restarting and get the same result with each. Once selecting I see the windows xp screen for about 1 second then it flashes blue and starts over. I am able to enter bios menus on the motherboard however. My system is home built MSI motherboard, 4 gb ram, and running xp. Any help would be greatly appreciated. Thank you very much. Kirk
 

A:Power outage, PC won't boot now

Read other 15 answers
RELEVANCY SCORE 53.2

My computer won't reboot since the power outage due to recent storm here in Ohio. I've tried everything Help?

A:power outage problem

Quote:




I've tried everything




You didn't give us a lot of information, so we can only give you a limited answer. The power outage might have taken out your computer. What did you try?
Is the computer a laptop or desktop? Does the computer turn on? As in do the lights and fans come on? Do you get anything on the screen? Do you get the computer logo on the screen or is it black. If you get the logo, does it start to boot Windows? How far does it get.

Read other 3 answers
RELEVANCY SCORE 53.2

My computer is plugged into surge protectors and while it was on my foot hit the swith on the protectors and my computer and monitor both went along with all else. vista started slower and said it didnt shut down correctly. It seems fine now but could damage have been done?

A:power outage mistake

Hi GreatNate,

Sure it could. I would recommend downloading and running TuneUp Utilities 2009 to find any errors in the registry and critical files... and the HDD too.

Read other 1 answers
RELEVANCY SCORE 53.2

I was working on the computer a few weeks back when we had a power outage, and ever since then, everything has been opening slowly and responding slowly, like when I type in a url it takes several attempts of hitting enter to process. Would there be anyway to fix this? I can give more info if needed.....thanks

Dan

A:problems after power outage

did u have an antivirus check? recover console with xp cd?

try run>chkdsk /r

Read other 1 answers
RELEVANCY SCORE 53.2

My pc (sometimes) shuts down for a fraction of second and then restarts at time of power outage (most of the time the reboot occur when power comes back to UPS after the outage). The most weird thing happening is that when I switch off the electric supply of UPS (ie. where UPS is connected to socket), it back up the computer normally, I mean without any re-boot happening. But when there is power outage the computer re-start. And there is more, sometimes UPS makes a click like sound & pc restarts without any kind of power outage, and that happens a lot.

I have tried changing the UPS, connected UPS to other points in house, plugged CPU to different points behind UPS, isolated other equipments from UPS (like directly plugged TFT monitor, speaker to main lines so that CPU gets dedicated power) and done many other things, but no success !!

What is the reason behind this strange problem? Is it my PSU? How can I solve it !?
 

A:PC reboots on power outage even with (new) UPS!!

Read other 11 answers
RELEVANCY SCORE 53.2

If posting a question so soon after joining this forum is a no-no, I apologize.

heres my problem. My home DeskTop...built by a tech guy we used to know, is constantly trying to restart itself. We had a power outage and now the computer starts up, get to a certain stage where it aploogizes for the inconvience and gives me the option to restart in safe mode, safe mode with networking, etc....or start normally. I have tried every option. It trys to start windows and then gets back to saying the same message.

I have XP service pack 2 on the PC.....anyone heard of this before. I'd re-install windows but my kids have there homework on it and I don't want to lose every we have on it if there is a way to fix it

thanks in advace for any help offered

A:Power Outage and XP won't restart

Try to clear the CMOS by either removing the battery or the jumper method for about ten or fifteen minutes. See if that helps. Some times with a power outage, it corrupts the bios setting because it did not have a chance to save before it was shut down by the loss of power.

Don't forget to unplug the computer and ground yourself before working in that case.

Read other 4 answers
RELEVANCY SCORE 53.2

After a power outage my speakers weren't working. I tested my speakers on another device and they were working. I then used system restore and my speakers are working again. Does anyone have an idea what happened? I should add that while my computer is protected with a power surge outlet my speakers are not.

Thanks.

A:Power Outage/Speakers Out

It would be my guess a driver problem, which was corrected by System Restore. I can tell you this, System Restore only helps with software problems; the problem was not with the speaker.
A surge protector protects if the power comes on unexpectedly, or surges, it does nothing when power goes off (your need an Uninterrupted Power Supply (a surge protector, with battery back up) like I have. Your driver became corrupted and the Restore made it good again.
To check to see if other problems happened in the OS, read this tutorial
System Files - SFC Command

We had power out, too, in CT., from the Storm. New storm due about 9/11

Read other 1 answers
RELEVANCY SCORE 53.2

For starters I know next to nothing about computers, so please be really, really, really remedial with any responses and patient with me. Thanks in advance to any helpers out there!

About six weeks ago we lost out electricity for about 20 minutes. It went off suddenly, came back on suddenly... Our old desktop, running on Windows XP, was on when power went out. I turned it back on after the power returned. I tried to get online to check my email and couldn't get online. I checked the connections, things seemed fine. I check on our laptops (an old iBook G4 and a newish MacBook) and both were (and still are) able to connect (wireless connection though a Netgear router). The desktop is plugged into the router then into the modem, I believe (whatever the arrangement, it was working fine until the power outage).

Anyway after hours of frustrating internet searches trying to get things back in order, I'm at a complete loss. The IP address and subnet mask say 0.0.0.0 and the address type reads "Invalid IP Address." I tried to repair the connection. No dice. The connection itself reads "Acquiring network address."

What I've done:

* I've disabled the firewall
* I did some command prompts such as netsh winsock reset catalog and perhaps others (today is the first day i've messed with it in weeks) and rebooted the computer after them
* I did this command prompt ipconfig/all

After the ipconfig/all prompt it read:
Windows I... Read more

A:IP Address 0.0.0.0 after power outage

It could be the modem went out when the power came back on. Have you called your ISP?

Read other 9 answers
RELEVANCY SCORE 53.2

I see many people have had this problem. I have tried removing the battery, booting in all modes available, restoring factory defaults. Nothing worked!
I did run the self test. It shows drive failure.

Unfortunately, I did not receive the XP disc when I purchased the computer.


Any suggestions?

A:XP will not boot after power outage

OPP'S I posted this same problem on 11/11/11 and could not find it. Well, I did not realize I posted it in the hard drive forum. I intended to post in this forum.
Which forum should I proceed with? Sorry..

Read other 15 answers
RELEVANCY SCORE 53.2

Hello,

I have been trying to sort out my computer for about a week now. My husband turned on my computer a few hours prior to the arrival of Hurricane Sandy and forgot to shut it down. We lost power and it was not shut down properly.

I get a BSOD when Windows loads and gets to the login portion of start up. I can't catch completely what it says but it says Driver_IRQL_Not_Less and Equal . Or something along those lines. Towards the bottom it references " ndis.sys. "

To get it to boot correctly I have to run in Safe Mode and do a System Restore to a previous restore point. It then boots normally when restored, but if I shut it down again I get the BSOD and have to start all over.

I went through all of my drivers and updated/ made sure all were updated. The only one that I did not update was for the Microsoft Virtual Wifi Miniport Adapter. The update came back as unsigned. So I disabled the Miniport Adapter. I haven't rebooted to see if this fixed the problem, because I am scared of having to start all over. I thought coming here to work with those smarted than myself, before my next reboot to see if someone would be willing to help would be a better solution.

When I boot off my Repair Disc and use StartUp Repair, it says " Start up repair could not detect a problem. If you have recently attached a device to this computer, such as a camera or portable music player, remove it and restart your computer. If you continue to see this message, contact yo... Read more

A:BSOD following power outage

Welcome aboard.

The zip you updated contains Dumps ages old, and from those no meaningful inferences can be drawn.
Attachment 241757

Anyway, I may suggest you one thing.

As per Carrona.org, STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL
Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility

McAfee is the most widely known cause of Stop 0xA, IRQL_NOT_LESS_OR_EQUAL.
Uninstall McAfee Using McAfee Removal Tool.
Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download and install those, and then run full system scans with both of them, one by one.

Update these drivers:
DW1525 (802.11n) WLAN PCIe Card: From http://www.atheros.cz/
Broadcom NetLink (TM) Gigabit Ethernet: From http://www.broadcom.com/support/ethe...oaddrivers.php
NVIDIA GeForce 310: From http://www.nvidia.in/Download/index.aspx?lang=en-in
Let us know the results.

Read other 5 answers
RELEVANCY SCORE 53.2

My PC isn't rebooting after a power outage. When I power up it displays details of the graphics card, then hangs on the motherboard splash screen (it's an Abit AB9 Pro). I'm unable to get to the setup menu using the Del key, or to the POST using the tab key.

Is the mobo trashed??
 

A:Not rebooting after power outage

Hey,

There's two things that could of happened here, the first one could be an issue with your motherboard (probably not repairable either) or you may have an issue with the power supply itself and this is probably the more likely scenario.

If you have another PSU to try then please do - post back any findings.

Nick.
 

Read other 3 answers
RELEVANCY SCORE 53.2

Two nights in a row for unknown reasons the building experienced a power outage. Both times I woke up & had to restart my pc & got the multi-option screen with "Start pc Normally" which I did & it booted up normally.
Tonight, I'm playing it safe & shutting it down. Is there anything else I need to do so I know no damage was done? Hopefully none,thanks.
 

A:Power outage shut down PC

Shutting down your PC at the end of the day is a very safe thing to do.This way when power outage do happen. You do not have the computer shutting down the wrong way. I for one never leave mine on all night. I shut it down at the end of the day. As for damage from the last two nights when the power shut off . I doubt you have any if the computer is booting up and running fine.
 

Read other 9 answers
RELEVANCY SCORE 53.2

Yesterday there was a power outage, now my computer is extremly slow takes about 10 min to boot and 15 to start an application. I have ran CHKDSK and it says it says the hdd is "felfri" direct translation = flawless. I have also tried restoring the system to the day before but that didn't work either. This have happened before It works fine after formating it. But enough is enough I wanna know what the problem is so this doesn't happen next time.

i would appreciate some help

thanks

A:Computer after power outage

Chances are part of your OS is corrupted (chkdsk does not look at that), since a full format has fixed the issue in the past, I would suggest a repair installation of XP should do the trick, I might also suggest you look into a UPS (uninterruptible power supply) to prevent this from happening again.

Read other 6 answers
RELEVANCY SCORE 53.2

Quick and simple description. BTW, I'm not very computer savvy.
Power outage dumps my desktop (ASUS running Windows 8.1)
Power on, goes through initial boot up, cannot make it to login/desktop.
Power to monitor and video card fine.
Can get to BIOS and Windows 8 Troubleshooting screen. Troubleshooting says I need to free up disk space on C before it can repair.
Monitor goes blank but responds(wakes up) to mouse wiggle and key stroke.Any help would be greatly appreciated.
Thanks
P.S. Ignore my screen name. Apparently "Eric" is already taken.

Read other answers