Over 1 million tech questions and answers.

BSOD process or thread crucial to system operation has ended

Q: BSOD process or thread crucial to system operation has ended

I've getting occasional BSOD lately. They sometime occur only a day a part, sometimes a week. It started I'd say a month or so ago, which was also couple weeks after I had reinstalled Windows 7, which I did after an uninstall of Office 2013 seemed to have not completed correctly, and had also never gotten most of the preinstalled junk of this laptop anyways. I think I installed all the necessary drivers. All hardware functions correctly and nothing is missing in Device Manager.

Every time it is the same message "A process or thread crucial to system operation has unexpectedly ended". So far I have ran scans with MSE, MBAM Pro, and WDO, which have found no signs of viruses or other malware. I have run sfc /scannow, checkdisk and every scan that Seatools has. No problems have been detected with the harddrive, sfc found no integrity errors. Last night I had memtest86+ running off of a usb drive run for 7 passes. No errors were found. I went through Event Viewer and found nothing that seemed related. I checked and all my drivers seem to be up to date.

I hope I included all necessary information. My system specs are up to date. The three dumps I have are attached below. I had deleted the older ones with ccleaner without thinking. If I left out anything, let me know. Its been a while, since I've done much troubleshooting on a computer, so I might be overlooking something.

Attachment 275670

EDIT: Sorry, I didn't see about the diagnostic tool (which seems amazing btw) until after starting the thread. Here is the requested zip.

Attachment 275673

RELEVANCY SCORE 200
Preferred Solution: BSOD process or thread crucial to system operation has ended

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD process or thread crucial to system operation has ended

Your BSODs are hard drive related

bsod F4

Use the link below to test your hard drive

SeaTools for Windows | Seagate

Read other 9 answers
RELEVANCY SCORE 142.4

Hi

I ran Auslogics Boost Speed Registry Defrag - yes I know, I know.

I now have a persistent BSOD.

I cannot Boot into Safe Mode or any other mode.

Startup Repair picks up no errors.

sfc /scannow returns the following

Beginning system scan. This process will take some time.
There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again.

This is impossible as the only way to access Command Prompt is via Repair options.

The full BSOD is:-

A process or thread crucial to system operation has unexpectedly exited or been terminated.

*** STOP: 0X000000F4 (0X0000000000000003,0XFFFFFA8003AA03DO,0XFFFFFA8003AA06BO,0XFFFFF80002D84670)

I think I have narrowed down the problem. Auslogics has managed to screw up the process of migrating my new defragged Registry and I can find no way of getting my old one back.

System Restore does not work as it tells me I need to enable it on the drive (it is enabled - all my restore points are there but the check box next to my windows drive is greyed out)

After using Hiren's Boot CD's mini XP I have managed to locate a log file generated by Auslogics at the time of the crash. I have pasted the contents below.

******************

Program started 16/05/2009 at 16:35:17.
OS Version: Windows Vista Ver 6.1 Build 7100.
Windows Directory: C:\Windows\.
Windows System Directory: C:\Windows\system32\.
Windows Temp Directory: C:\Users\The BORG\AppData\Local\Temp.
User: The BORG.
You have 319964573696 b... Read more

A:BSOD: A process or thread crucial to system operation has unexpectedly exited or ....

After checking the file sizes of DEFAULT, COMPONENTS, SAM, SECURITY, SOFTWARE and SYSTEM files - it appears that only some of them have been modified. Unfortunately some of the file sizes are about 75% smaller which says to me that my BSOD occurred at the worst possible moment.

Still grateful for any suggestions but I reckon a fresh install might be in order.
 

Read other 3 answers
RELEVANCY SCORE 142.4

Hi All!

This problem has recently cropped up on my computer (2 days back) when I was re-installing windows (clean start).

Specs:
Win 7 64 bit...with latest updates.
Motherboard: Gibabyte GA-X58A-UD5
RAM: 12GB 1333Mhz Corsair....brand new.
Procerror: i7 930.
SSD: OCZ Vertex3 240GB
3 1TB WD hard drives (no RAID) of which 2 are good & one is failing (smart criteria).
Hard Drive Model: WDC WD10EARS -00Y5B1

The minidump & xml files:
 

A:BSOD: Process or thread crucial to system operation has been unexpectedely termimated.

"3 1TB WD hard drives (no RAID) of which 2 are good & one is failing (smart criteria)"... Remove the drive that is failing SMART status immediately! It could be the cause of this problem all by itself
 

Read other 7 answers
RELEVANCY SCORE 139.2

Dell Inspiron Windows 7 SP1 continue to get the BSOD window. Tried reset system to factory default, update BIOS and all available Hardware drivers on the system and still having this problem. Any help would be greatful.

Thank you in advance

Read other answers
RELEVANCY SCORE 128.8

I keep experiencing BSOD "A process or thread crucial to system operation has unexpectedly exited or been terminated."
Windows 2003 Standard Edition.
I have a lot of applications on it that is hard to get the setups.
Can Setup repair solve this problem?
I will be glad if you can be of help pls

Read other answers
RELEVANCY SCORE 128.8

Hello,
My computer has been showing the following blue screen error for a few months now,



***start of error message****
A problem has been detected and windows has been shut down to present damage to your computer.




A process or thread crucial to system operation has unexpectedly exited or been terminated.



If this is the first time you've seen this stop error screen.



restart your computer. If this screen appears again. follow these steps:



Check to make sure any new hardware or software is properly installed.



If this is a new installation, ask your hardware or software manufacturer For any windows updates you might need.



If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.



If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advanced startup options, and then select safe Mode.



Technical information:



*** S"color:#222222;font-family:Arial, Helvetica, sans-serif;font-size:small;">


collecting data for crash dump ...



Initializing disk for crash dump ... 



Beginning dump of physical memory.


Dumping physical memory to disk: 75




*****end of error message******
*
On restarting the computer I received the following problem details :


***start of problem details****
Problem signature:
  Problem Event Name: BlueScreen
&... Read more

Read other answers
RELEVANCY SCORE 116.4

Greetings,i've been constantly been having blue screens and freezes non-stop,and since i've once fixed a problem with the help of this website,i trust that i can get some help again.
Ok,lets start from the beginning,about 20 days ago i went on a trip for holidays,a few days earlier i'd cleaned my computer's cooler fan,usual stuff.
Now,as i've come back,my computer has been unusually slow and having non-stop blue screens and freezes,to the point where i sometimes have to restart it several times for it to last more than start-up.
Also apologize for the bad quality of the photo and the occasional mixed up languages in my attached file,as my computer language is set to Portuguese. I've tried running blue screen view,but the program shows no signs of anything like nothing was happening,which is very unusual as it has helped me solve many issues before.
On a side note,i've been having my Utorrent randomly close its process for no reason,and malware bytes has shown no signs of problems. Kinda gave up on doing a complete scan with Avast anti-virus because my computer often blue screens before the scan can even get to 1%,but i will try to help as much as i can.
I await for responses

Read other answers
RELEVANCY SCORE 104.8

Hi,

My new computer has been having problems with suddenly crashing while I'm watching movies, downloading movies, performing a virus scan test, listening to music etc. I will be in the midst of doing one of the aforementioned tasks and suddenly it crashes and leads me to the BSD with either of the following messages;

“A problem has been detected and windows has been shut down to prevent damage to your computer.

A process or thread crucial to system operation has unexpectedly exited or been terminated.

Follow these steps:

Check to make sure any new hardware or software is properly installed. If this is a new install, ask your manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hard or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select safe mode.

Technical Info:
***STOP: 0x0000007A (0xC07B9BD0, 0xC000000E, 0xF737A40A, 0x1F5F5860)

Beginning dump of physical memory...”

or

Kernel_Stack_Inpage_Error

***STOP: 0x000000077(0xC00000184, 0xC0000185, 0x000000000, 0x0025E000)

Beginning dump of physical memory...

The specs on my computer are as follows;

AMD Athlon 64 Processor - Duo Core
3500+
2.21GHz, 1GB RAM,
Motherboard: NF4X
Graphics: GForce7300GS Power-Full 256MB
HDD: SATA 160G (7200.7/2M)
Windows XP Professional, SP2

I checked my event... Read more

A:BSD - A Process or thread crucial to system..

I would first suspect that you have an overheating problem. Very random errors can be produced by that.
 

Read other 1 answers
RELEVANCY SCORE 76

Hello, I am trying to isolate what happened when a power failure last night took down my desktop. I haven't had problems with this computer in two years(and haven't had a power outage in about as long amazingly, one of the few benefits of a drought I guess). Based on what I have found, it is a hardware failure. The error is the:

"A process or thread crucial to system operation has unexpectedly ended"

I have been trying to figure out how to read the minidump files with no success and I would like to get my desktop up and running as soon as possible.

Here are some of the symptoms I am seeing. When booted on, two harddrives always show of my four(two 1 TB, 2 SSDs of different makes, one of which is the primary OS drive). The F and C always show, but the other two often do not. Except when I ran Seagate tools. From what I can tell, both of them are on the same pair of ports to the motherboard. The two that do not show up normally, return a bunch of errors on the SeaTools scan for logs reporting and barely function scan wise and won't scan through SMART scan.

The D and E drives almost seem to randomly lose connection.

The computer BSODs on reboot so far approx 50% of the time of 4 boot ups. CHKDISK /F /R returned no errors.

Based on my information and knowledge, I would assume the motherboard is damaged. But without more information I can't tell.

Attached are the Minidump files.

A:Crucial thread failure BSOD after storm caused power outage

So, if you switch the cable from one of the "working" drives, to one of the drives that isnt showing up, does it show up?

Read other 5 answers
RELEVANCY SCORE 64.4

I have the two above BSoD errors occurring frequently.
Kernel Data Inpage Error
Process or thread crucial to system operation has been terminated

Attached DOCs from the how to post. Any help would be great!

A:BSoD Kernel Inpage Error and Critical Thread or Process

Forgot to add:
OS - Windows 7 Pro x64
? What was original installed OS on system? Same as above.
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? OEM
? Age of system (hardware) 1.5 years
? Age of OS installation - have you re-installed the OS? No

? CPU i5-2500K
? Video Card 2x-Radeon HD 6800
? MotherBoard - Asrock P67 Extreme4
? Power Supply - brand & wattage 650 Watt (forget brand)

? System Manufacturer Me!
? Exact model number (if laptop, check label on bottom)

Read other 9 answers
RELEVANCY SCORE 64.4

Hello

When I use mstsc /console in order to catch server from laptop, when i closed it the process stil present on task manager and cosume 98 % cpu

Any idea?

Thanks

Read other answers
RELEVANCY SCORE 64.4

How can one tell if AAWService.exe is the Lavasoft process or a virus masquerading as a legitimate process?

I can not find AdAware in the MSCONFIG/Startup or SERVICES.MSC lists. Does this mean that the process in Task manager is a rogue? If I try to end the process it just returns automatically.

I have looked in the Registry it is not set up in any RUN catagory. I did however, find a reference under HKLM/Software/Microsoft/Windows/Installer/UserData/S-1-5-18/Components/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\6AB92E0DBE815F7459E06CA5C1256D3F with an index name of B0B35DEDC76B4424EAA66DDFC3821DFE.

In addition there are references under HKLM/System/ControlSet001/Services/HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Lavasoft Ad-Aware Service with an index name of imagepath

HKLM/System/ControlSet001/Services/HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\Lavasoft Ad-Aware Service with an index name of imagepath

HKLM/System/ControlSet001/Services/HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Services\Lavasoft Ad-Aware Service with an index name of imagepath

HKLM/System/ControlSet001/Services/HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Lavasoft Ad-Aware Service with an index name of imagepath

HKU/.Default/Software/Microsoft/Windows/ShellNoRoam/MUICache with a data value of Ad-Aware Service Application

HKU/S-1-5-18/Software/Microsoft/Windows/ShellNoRoam/MUICache with a data value of Ad-Aware Service Applicat... Read more

A:AAWService.exe process cannot be Ended

Read other 10 answers
RELEVANCY SCORE 63.6

I Accidently Ended A Process On My Task Manager And My Aol Shuts Off When Opening Programs-

How To Recover Process Please!!! My Business Is Suffering

Program:c:\program Files\america Online 9.0\ Waol.exe Is The File

Process I Ended By Mistake

Bob
 

A:Need To Recover Process I Ended On My Compaq

System Restore
 

Read other 1 answers
RELEVANCY SCORE 62.8

Hi and thanks in advance for any advice offered!

Running Windows 10 and hate it :'(

Netflix page was loading but the videos wouldn't start, so I restarted the laptop- and same problem.

The laptop was quite noisy (usually this happens when Windows is downloading updates or doing whatever else it does whenever it wants!) so I opened task manager to see what was using so much of the power (excuse my lack of tech knowledge/language!!).

I didn't recognize the task/process in question, so right clicked on it to see what it was/does etc- then I accidentally ended it

Well, the result of that stupid effort was two-fold, one good and one very very bad!!

Firstly, the noise stopped, and computer started responding really well (that's the good one)

Secondly, when I opened up Edge again, to reload Netflix, It loaded the red logo and black background, but nothing else. No text. No images. No videos. Just the plain black screen and the logo.

So I restarted the laptop, hoping that the process/task would restart, but the page loaded exactly the same.

I shut down and the started laptop up again and no change.

I tried another page- seriesonline- and that, also, failed to load any pics/links/videos.

Closed and reopened Edge. The home page loaded (where it shows some headlines etc) but when I tried to search for solutions to this problem, I could click to open the page links, but most of the pages wouldn't actually load, at all!

I've guessing that I have... Read more

A:Accidentally ended a process in task manager

Hi, essential windows processes will warn if you attempt to end them, and even if you do they will restart shortly after.. certainly after a restart, so you appear to have some other problem. Do a system restore to before this happened, go to search type:- system restore open it and proceed.
 

Read other 1 answers
RELEVANCY SCORE 62.8

Hi and thanks in advance for any advice offered!

Running Windows 10 and hate it :'(

Netflix page was loading but the videos wouldn't start, so I restarted the laptop- and same problem.

The laptop was quite noisy (usually this happens when Windows is downloading updates or doing whatever else it does whenever it wants!) so I opened task manager to see what was using so much of the power (excuse my lack of tech knowledge/language!!).

I didn't recognize the task/process in question, so right clicked on it to see what it was/does etc- then I accidentally ended it

Well, the result of that stupid effort was two-fold, one good and one very very bad!!

Firstly, the noise stopped, and computer started responding really well (that's the good one)

Secondly, when I opened up Edge again, to reload Netflix, It loaded the red logo and black background, but nothing else. No text. No images. No videos. Just the plain black screen and the logo.

So I restarted the laptop, hoping that the process/task would restart, but the page loaded exactly the same.

I shut down and the started laptop up again and no change.

I tried another page- seriesonline- and that, also, failed to load any pics/links/videos.

Closed and reopened Edge. The home page loaded (where it shows some headlines etc) but when I tried to search for solutions to this problem, I could click to open the page links, but most of the pages wouldn't actually load, at all!

I've guessing that I have... Read more

Read other answers
RELEVANCY SCORE 62.4

task manager shows that my pc is boggled down with multiple tasks running simutaneously. i was ending what i thought were unneccesary tasks and now my desktop shows only my wallpaper. icons and start menu are gone. not sure how to go about restoring my active desktop. ive only been able to access files through task manager browser and cmd prompt. need help further identifying these tasks that are being run and which i will be able to safely end.

have 3 networked pcs
 

A:Ended process in task manager and loss use of desktop

Are you XP or Vista
Either way, use Process Explorer instead
Install Process Explorer
Click Options and set Hide when Minimized, Allow Only One Instance, Confirm Kill, CPU History in Tray Icon
btw. when it's minimized, note the red and green waves through its system tray icon
Green indicates total CPU usage
Red indicates the process using most the most the CPU time
Hover cursor over the icon to get on CPU usage and who using most of it
Add process explorer to your startups with argument /t and it will start minimized

As to what happened earlier, If you killed Explorer you killed the process which is the parent of processes runnning on your desktop. !

In PE, click column Process to change views
- Alpha sort (A-Z)
- Alpha sort (Z-A)
- Tree view . Shows relationship between processes (parent child). In Tree View
=== > All the processes listed prior to explorer.exe was started during boot / startup
- ==>Note everything after that is a child of explorer
 

Read other 6 answers
RELEVANCY SCORE 62.4

After ended process tree of audiodg.exe using Resource Monitor,my volume doesn't work. How to make my volume back to normal? Help me please.

A:Sound Doesn't Work After Ended Process of Audiodg.exe

Restart and lets audiodg.exe start back up? Don't kill it again either.

Read other 2 answers
RELEVANCY SCORE 62.4

HP t5335z  when loading: mistake hptc-dm main process ended, respawing  I try to perepro**bleep** and there is a mistake : sd 1:0:0:0: [sdb] assuming drive cache write throughFAT: utf8 is not a recommended IO charset for FAT filesystems,    filesystem will be case sensitive! please help to correct it.

Read other answers
RELEVANCY SCORE 62.4

Hello there,

Please help me with this. I accedenatlly hit windows explorer end process in the task manager window and I thought restarting the laptop will bring everything back to normal. But everytime I restart I get NOTHING on my screen. Its all black .. I donno what to do . . please help!! Its a HP pavilion dv9000. operating system XP home. Thanks.

A:Ended Process windows explorer and now screen is all black!!

Press Ctrl-Alt-Delete keys all at the same time and Task Manager should open.
In Task Manager, click File >> New Task (Run).
Type explorer.exe in the box then click 'OK'.

Read other 9 answers
RELEVANCY SCORE 62.4

My friend played a joke on me by setting a screen shot of my desktop as my background and ending the explorer.exe process. I just opened control panel and started a new explorer.exe process but when i did the start menu reverted to a windows 98-ish theme. I've tried many things to get it back to the vista style, and I have found nothing that works. I've had this done to me a couple of times when I used XP on my desktop and everything worked fine. I'm not sure what to do at this point.

Read other answers
RELEVANCY SCORE 61.6

my youngest son has a hp cq60 laptop with vista ultimate, he had Nortan Antiviris up and tried shuting it down then went to Task Manager and ended the process, now when he restarted it, it wont start Normally or in Safe mode, i got it for him at best by and it was brand new with no recovery cd's. So we cant recover it, Please help!
 

A:Laptop wont startup, Ended a Process in task manager, Help!

Did you try a System Reboot?
 

Read other 1 answers
RELEVANCY SCORE 61.6

my computer works great. Then all of a sudden it stops and says that is is process crucial died. I already tried to fix it with powershell but it said it dosent see anything wrong with it. I don't know how else to fix it. Please help.
 

Read other answers
RELEVANCY SCORE 60.8

Hi,
I need yr help desperately.
What was the problem: lately whenever I opened MSIE 6 on my comp new web site pop-up window appeared from time to time and start page appeared different to the one I chosen before.

But before my SYS ADMIN came to help it had happened that I ended IEXPLORE.EXE process via task manager. Then everything looked ok, I worked for some time and switched off the computer.
Next morning when I switched it on, after loading of desk top screen the Windows system message popped up saying that “Internet Explorer has an error and will be closed”. Then the screen “refreshes” and a new Windows message pops up, and so on every 5 seconds. And you cannot stop it.
So it seemed that computer would not load properly because I ended iexplore.exe the night before.
Can it be possible? And what can be done?
The reason for web sites pop-ups was Trojan as we found out later. I we cured it, but we do not know what to do with the above.

Than you very much for yr advice.
 

A:[resolved]I ended iexplore.exe process and the comp wouldnÂ’t restart properly.

Read other 10 answers
RELEVANCY SCORE 58.8

Before I ask my question, I'd just like to say that this is an entirely recreational refurb job I'm doing and I expect it to take a while. This thread may hang around and resurface periodically over the next couple of months.

Tonight I aquired a nice little PC that appears to be a professionally designed custom system based on, what appears to be, a "Sapphire Axiom A3-M275" micro-ATX mobo with an AMD Duron CPU.

It does not work. I got it at work when a customer decided to toss it out and buy a new prefab system. My coworkers who tried to save the system believe that it is a massive system failure involving both the mobo and the hard drive. (I generally don't think highly of them, and given the time I'd like to test that theory )

Set it up myself tonight. It has no RAM (my system doesn't use DDR) but I figured I could at least bring up BIOS mode. No luck. CPU fan (plugged into mobo) runs, but there is no monitor response. No beep codes, no HD activity that I can tell. There are no error code lights on this board.

The weirdest thing is, when I press the power switch the power _and_ HD light on the front of the case both stay on steadily, with no indication of activity on the part of the HD light. What does that mean? (Q #1.)

Also, holding down the power switch does not power down the system like it does on my personal Dell machine. I have to unplug to power down. Is that desired operation? (Q #2.)

Any suggestions on where to go from her... Read more

A:Operation AMD (yet another refurb help thread)

Read other 9 answers
RELEVANCY SCORE 57.6

I've got an HP 1350 scanner/printer. Suddenly my printer stopped working. When i tried to reinstall the software and printer, i received this message..."The I/O operation has been aborted because of either a thread exit or application request" I don't know how to fix this. Can anyone help me..its really frustrating. I'm not sure what to do.
 

A:The I/O operation has been aborted because of either a thread exit or application req

try uninstalling the software before reinstalling it. it sounds like there is some program running in the background that is interfering with your printing software. if you want to be safe, i would uninstall in safe mode.
 

Read other 1 answers
RELEVANCY SCORE 57.2

I have the same problem as many that my windows 7 x64 system will bsod on wake from sleep about 1/5 of the time. I've attached the minidump

A:another BSOD on system wake thread

Hello and Welcome to SF !

We need the complete logs http://www.sevenforums.com/crashes-d...tructions.html

Based on the crash dump you attached it's pointing to Windows Kernel which may not be the problem. Lets start with basics

Found something it maybe the problem "DISK_HARDWARE_ERROR: There was error with disk hardware"

Run a Hardware Diagnostic !! ? Captain Debugger follow this thread

If your Overclocking please reset the BIOS values to default settings How to Reset Your BIOS - wikiHow

Run SFC /SCANNOW Command - System File Checker

Remove the following driver i.e.


Code:
MRESP50a64.SYS Sat Nov 19 13:44:28 2005 - NDIS Protocol kernel driver.
Can't find the manufacture of this driver i would recommend to deactivate it.
Go to C:\Windows\System32\Drivers MRESP50a64.SYS to MRESP50a64.old

Bugcheck:


Code:
KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: 0000000000000020, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000009d, error status (normally i/o status code)
Arg3: fffffa8004e50078, current process (virt... Read more

Read other 1 answers
RELEVANCY SCORE 57.2

The issue with by BSOD is I don't know what it is triggered by, it happens when gaming, sometimes when I watch streams and other times when I just use my PC to browse reddit and other sites.
DESKTOP-DGT5UST-Tue_02_09_2016_153420_22.zipDESKTOP-DGT5UST-Tue_02_09_2016_153420_22.zip

A:BSOD System Thread Exception help

Please tell me, how have you activated your installation?

Code:
<LicensingStatus>SL_LICENSING_STATUS_NOTIFICATION</LicensingStatus>
<LocalGenuineState>SL_GEN_STATE_INVALID_LICENSE</LocalGenuineState>

Read other 0 answers
RELEVANCY SCORE 56.8

I got a BSOD with system thread exception not handled netIO.sys

I used bluescreen viewer and it highlights the netIO.sys and the tcpip.sys and also ntoskrnl.exe on another dump.

I have viewed the dmp files in windbg but if I'm honest I don't know what I'm looking for.

I've zipped up the dmp files(only 2 files)if someone could have a look and find out what the issue is.

It would be greatley appreciated, many Thanks.
 

Read other answers
RELEVANCY SCORE 56.8

Hi,
My laptop keeps on crashing with this error "this System Thread Exception Not Handled", and the last error I got was "Driver Power State Failure".  Every time it happens I recover my the computer to the previous restore
point. That is very annoying, I've got tired of restoring my computer, can anybody help me to fix it permanently?

I follow instructions posted in the forum to copy the  DMP files, I tried to post the link here but I was not able to, I got this error after I pressed the Submit button:

        Body text cannot contain images or links until we are able to verify your account.
Anybody can help? I cannot even get passed posting the link here....
I appreciate  your help! 
Ling

Read other answers
RELEVANCY SCORE 56.8

Hi, since updating with the Windows 10 Anniversary Update, on Aug 3rd. I have had 8 BSOD occurrences Each giving the same
Stop Code: THREAD EXCEPTION NOT HANDLED also What failed? partmgr.sys.
Each time I had to power off and restart.
I looked up this driver in the Driver Reference Table which says this is;
Partition Management Driver - Windows Update

I ran your debug download which created the following file:DESKTOP-IV1DV6A-09_08_2016_181630_95.zip

Can you help me?
ps. (Did my attachment work?)

Read other answers
RELEVANCY SCORE 56.8

Hello all, i was getting BSOD for graphics card failure, TDR Failure, and Watchdog Failure. Now im not gettting that, but im getting system service thread exception. I ran the Scannow and here is what i got. I do not know where to go from here. I JUST WANNA PLAY DOTA 2!! ugh.

A:BSOD system service thread exception

Hi kbenton10 & Welcome to the forums ^_^,

Kindly follow the below instructions and upload the ZIP File with your next post -
Blue Screen of Death (BSOD) Posting Instructions
Also, see if your problem is resolved by following the below blog post of mine -
TDR Fix (For AMD & NVIDIA Users) - OMG Debugging!!!
Let me know how it goes ^_^
-Pranav

Read other 1 answers
RELEVANCY SCORE 56.8

Hi,
My laptop keeps on crashing with this error "System Thread Exception Not Handled", and the last error I got was "Driver Power State Failure".  Every time it happens I recover my the computer to the previous restore
point. That is very annoying, I've got tired of restoring my computer, can anybody help me to fix it permanently?

I follow instructions posted in the forum to copy the  DMP files, below is the link:
https://onedrive.live.com/redir?resid=C912360C7971A154!216&authkey=!ACvqaxGcqhiLHLA&ithint=file%2czip
Thank you for your help! 
Ling

Read other answers
RELEVANCY SCORE 56.8

Recently I got this BSOD:

SYSTEM THREAD EXCEPTION NOT HANDLED

The first time, Its said about a file named "fltMgr.sys"; But after that, Everytime It only shows "SYSTEM THREAD EXCEPTION NOT HANDLED"

Windows can't loads up. I can access the windows only in safe mode.

Windows 10 Pro x64

The dump has been uploaded.

https://mirrorace.com/m/6k1k

Thank u.
 

Read other answers
RELEVANCY SCORE 56.8

My computer crashed yesterday after I plugged in a USB drive. The BSOD error code was SYSTEM_THREAD_EXCEPTION_NOT_HANDLED and I get the same error everytime my computer turns on. I can boot into the recovery options but nothing works (safe mode, system restore, startup repair all broken). I have another HDD in the computer which I can boot from and access the old broken windows drive. I really don't want to have to wipe the drive.

Have looked at the dumps, but they seem to be from months ago. How do I get the dumps from this crash?

The error I get when trying to do a system restore is:

"System restore failed while restoring the registry from the restore point. An unspecified error occurred during system restore. (0x80070003)"

Thanks to anyone that can help.

A:BSOD system thread exception not handled

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!

Do your still need help with this problem?
I will be notified if you reply to this topic and will respond within 48 hours.

Read other 1 answers
RELEVANCY SCORE 56.8

Hi,
I keep getting the BSOD on my Windows 8.1 laptop with the message System Thread Exception Not Handled (atikmdag.sys). I've looked at other posts on this but I am not 100% sure if the problems I'm having are exactly the same as the previous ones posted. I'm therefore a bit reluctant to try any fixes on my own in case I just worsen or complicate the problem.

I have zipped the minidump files as instructed - on Onedrive - with the link: https://onedrive.live.com/redir?res...29&authkey=!ABBDAKQIh1bVkNw&ithint=folder,zip

I'd appreciate any help anyone can give me. Many thanks.
 

A:BSOD. System Thread Not Handled (atikmdag.sys)

Read other 9 answers
RELEVANCY SCORE 56.8

i had this 
bsod system-thread-exception-not -handled
after scanning with norton power eraser and deleting(norton) a file from system mechanic pro,
so after rebooting for changes to take effect i had bsod.i know if i uninstall system mechanic from safe mode its gonna be fine,but i cant acess safe mode cause im having again there blue screen.also i tried system restore but it cant finish cause some windows files are corrupted,so i ran sfc/scannow and found corrupted files but couldnt repair them.
 
so im asking how can i fix bsod without system restore or accesing safe mode,and how can i fix my corrupted windows files so system restore can work.
fyi i cant also create a usb for system repair cause of corrupted files......
 
thats my minidump file.......
 
Dump File : 102714-17296-01.dmpCrash Time : 27/10/2014 9:53:43 μμBug Check String : SYSTEM_THREAD_EXCEPTION_NOT_HANDLEDBug Check Code : 0x1000007eParameter 1 : 0xc0000005Parameter 2 : 0x81fce7f8Parameter 3 : 0x829dc8f8Parameter 4 : 0x829dc4c0Caused By Driver : SMR430.SYSCaused By Address : SMR430.SYS+d7f8File Description : SMRProduct Name : SMRCompany : Symantec CorporationFile Version : 4.3.0.266Processor : 32-bitCrash Address : SMR430.SYS+d7f8Stack Address 1 : SMR430.SYS+bd0bStack Address 2 : SMR430.SYS+cfdfStack Address 3 : SMR430.SYS+1407Computer Name : Full Path : D:\Windows\Minidump\102714-17296-01.dmpProcessors Count : 2Major Version : 15Minor Version : 9600Dump File Size : 143.824Dum... Read more

A:bsod system-thread-exception-not -handled

Do the following, it should repair the corrupt files.
 
Click or tap on Search, then type cmd in the Search box.
 
cmd will appear under Apps, right click on it and in the options at the bottom of the page choose Run as administrator.  This will open the Elevated Command Prompt.
 
In the Elevated Command Prompt type in the following command followed by pressing the Enter key for each command.
 
DISM /Online /Cleanup-Image /RestoreHealth

Read other 15 answers
RELEVANCY SCORE 56.8

Some background info: I am running Windows 7 Ultimate. It is 64-bit. I am running it on a laptop.

I have no idea why I got the BSOD, but I did get it today. Restarted the computer in safe mode, then restarted again in "regular" mode and everything was fine. I'm typing on the same computer now (it's the only one I have, okay?). Can't think of anything that would be wrong with the computer, except the charger broke (I'm pretty sure this is a charger issue, and a new one is in the mail) so the battery doesn't charge: I have to have the computer plugged in when I use it.

Anyway, here's the text from the MEMORY.DMP file. Thanks for your help, guys! I'm a little afraid to even try anything myself, since I've heard messing with these files is a bad idea, so I came here for help first. I hope that's okay.

Microsoft ® Windows Debugger Version 6.12.0002.633 AMD64
Copyright © Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17944.amd64fre.win7sp1_gdr.120830-0333
Machine Name:
Kernel base = 0xfffff800`02a54000 PsLoadedModuleList = 0xfffff800`02c98670
Debug session ti... Read more

A:BSOD: System Thread Exception Not Handled?

- Download Who Crashed --> http://www.resplendence.com/download/whocrashedSetup.exe

- Install it and run

- Click on Analyze, after few seconds, you will get the message

- Right click, then Select All, right click, then Copy

- Save text in Notepad, and upload it here

Read other 4 answers
RELEVANCY SCORE 56.4

[solved]
Cannot import to registry.. "Not all data was successfully written to the registry. some keys are open by the system or other process, or you have insufficient privileges to perform this operation"

Read other answers
RELEVANCY SCORE 56

I keep getting this blue screen:
 
STOP: C000021a (Fatal System Error)
The windows SubSystem system process Terminated unexpectedly with a status of OxC0000005 (Ox7542f33d Ox00a1f138).
The system has been shut down.
 
Its always between 8 and 9 am eastern time when it crashes. Once it crashes, I am able to reboot and use as normal for the reminder of the day. I have replaced memory, disabled/uninstalled all anti virus and updated drivers. This has been happening for over a year now. Can you help?

A:BSOD STOP: C000021a (Fatal System Error) The windows SubSystem system process Te

Have you check the drive itself? Run chkddsk and also download the hard-drive diagnostic tool for your drive to see if maybe the drive failing.

Read other 0 answers
RELEVANCY SCORE 56

Hi,

This BSOD occurred for the first time last weekend. If my memory serves, I was watching a movie on vlc player when it happened. I have an Asus Notebook PC model name: S400C, V400C, R407C. Running Windows 8.1 x64bit. Please help.

(I hope I did the SF Diagnostic Tool correctly)

Thank you!

A:BSOD System Thread Exception Not Handled [AsusTP.sys]

Only 57 Windows Updates installed. Most systems have 70 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Don't worry about the specific number, it's just important that you have checked and installed any updates that were available.

Visit this liink and update all of the 8.1 drivers (to include the BIOS/UEFI) Notebooks & Ultrabooks - ASUS VivoBook S500CA - ASUS

More to follow later today - I'm running late this morning

DON'T USE THE FOLLOWING STUFF - I HAVEN'T REVIEWED IT YET (this is a canned speech that I edit before posting):

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

ASMMAP64.sys Thu Jul 2 05:13:26 2009 (4A4C7A36)
LENOVO ATK Hotkey ATK0101 ACPI UTILITY (also found in Asus systems)
http://www.carrona.org/drivers/driver.php?id=ASMMAP64.sys

atkwmiacpi64.sys Tue Sep 6 21:44:52 2011 (4E66CC94)
ATK WMIACPI Utility
http://www.carrona.org/drivers/driver.php?id=atkwmiacpi64.sys

AiCharger.sys Thu Sep 22 22:04:40 2011 (4E7BE938)
Asus Charger Driver [br] Likely BSOD cause - haven't seen recently (15Jan2013)
http://www.carrona.org/drivers/driver.php?id=AiCharger.sys

tap0901.sys Thu Nov 24 13:50:27 2011 (4ECE... Read more

Read other 4 answers
RELEVANCY SCORE 56

Hi! I have a similar problem to that described in the previous thread, and I'm also reluctant to mess about with things too much! (System Info follows at the end...)

The story so far:

7 days ago, I had a blank screen shortly after installing and using Driver Booster 2.

I refreshed my laptop (Toshiba Satellite), installed about 15 MS security updates and shortly after got the BSOD for the first time and Windows re-started - about 4 times in 30 mins...

I then located and removed the Radeon HD 8330 driver. This obviously adversely affected the display (not good!) so I restored it.

Everything then ran fine and fast for 3 days (about 12 hours use) until yesterday when the BSOD reappeared and Windows re-started - about 4 times in 30 mins, just like before...

All OK so far today - but any help you can provide to kill the issue off would be really appreciated!

Cheers, Chaz
SYS INFO:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: AMD A4-5000 APU with Radeon(TM) HD Graphics, AMD64 Family 22 Model 0 Stepping 1
Processor Count: 4
RAM: 3526 Mb
Graphics Card: AMD Radeon HD 8330, 512 Mb
Hard Drives: C: Total - 238118 MB, Free - 186525 MB; D: Total - 238468 MB, Free - 238344 MB;
Motherboard: AMD, Larne
Antivirus: Kaspersky Internet Security, Updated and Enabled
 

A:BSOD. System Thread Not Handled (atikmdag.sys) Feb 2015

Having read a similar thread started by Tomlincs on 13/02/15, I looked at AMD.com.

Having d/loaded AMD's Driver AutoDetect software, I installed the latest recommended driver for W8.1 64 bit Radeon HD 8338 driver.

Since doing this 48 hrs ago I've not had a BSOD and all seems to be running smoothly.

I think it's to soon to say problem solved - I will come back and update either way...

Chazz
 

Read other 3 answers
RELEVANCY SCORE 56

Hello,
I just want to say thanks for checking out my post, as this has been an ongoing problem with my computer for about a year now.

First off, when the BSOD's started I tried a computer repair store hoping they would find the problem right away. While they had my computer it never blue screened once. So they weren't able to find the problem, however they never even tried to look at my dump files. So, I decided it was time to take matters into my own hands. After some searching I still couldn't find the problem, and pretty much gave up and just let the occasional BSOD occur. They use to happen around once every 4-5 days, but now its twice or even three times a day depending on which games I'm playing, sometimes when I'm just on the desktop too!
It's getting pretty frustrating, and I am hoping I will get lucky and can have someone help me solve this problem... But here is the .zip file. Thank you for taking the time to look
The BSOD's seem to be mostly inconsistent, but the ntoskrnl.exe has been the cause several times, so I'm not sure if there is something corrupted there or what. Anyways thanks again for checking this out, and any help would be super awesome!

A:BSOD with System Thread, IRQL Less than, Memory Managment, etc.

Code:
fffff880`059c34e0 fffffa80`09020000
fffff880`059c34e8 fffffa80`081719f0
fffff880`059c34f0 00000000`00000001
fffff880`059c34f8 fffff880`1328675dUnable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x21e75d
fffff880`059c3500 fffffa80`00000001
fffff880`059c3508 fffff880`059c4558
Uninstall the display driver then reboot. Now reinstall the driver only, following these specific steps outlined here:
NVIDIA Drivers - Avoid Problems


Code:
fffff880`09fa5e40 fffff880`09fa6280
fffff880`09fa5e48 00000000`00000000
fffff880`09fa5e50 fffff880`13d5ace9Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Rt64win7+0xbce9
fffff880`09fa5e58 fffffa80`078c7918
fffff880`09fa5e60 fffffa80`09dad665
fffff880`09fa5e68 fffff880`09fa626
.
Loaded symbol image file: Rt64win7.sys
Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Fri Mar 16 23:31:36 2012 (4F6339B0)
CheckSum: 000B1298
ImageSize: 000AA000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update the Realtek network driver - its outdated.

You need to run a few tests:

RAM - run 8 passes, n... Read more

Read other 4 answers
RELEVANCY SCORE 56

Hi BC, 
 
About a week back, my computer crashed with a BSOD. However, there were no other specifics. At that time, I had almost 30-35 tabs open on Chrome as I was doing research for my thesis.
 
I decided to then just make sure I don't open too many tabs and everything seemed fine after that.
 
Today, another BSOD happened and this time, with the aforementioned error "system thread exception not handled (bckd sys)".
 
I'm really not sure what could be triggering this. The only change I've made to my computer over the last two weeks is that I recently installed K9 Bluecoat Web Protection.
 
I did a fair bit of searching online, but each forum or article seems to indicate a different root cause, so I'm wary of following the solutions provided, given that I may not have the same root problem.
 
Computer details:
Model: Samsung NP370R4E
Windows 8.1, 64-bit
Intel ® Pentium ® CPU 997 @ 1.60GHz
4GB RAM
 
Also, here is the last two events from the event log (I'm not sure if it will help identify the problem, but just thought I'd throw it in):
 
Log Name:      System
Source:        Microsoft-Windows-Kernel-Processor-Power
Date:          2/2/2016 12:08:27 AM
Event ID:      37
Task Category: (7)
Level:         Warning
Keywords:      
User:          SYSTEM
Computer:      Samsung
Des... Read more

Read other answers
RELEVANCY SCORE 56

woke up one morning after leaving my computer on over night, the fan was going like a bat out of hell and when I attempted to play a game on it was very laggy. figured I would turn of my computer for a while to let it cooldown, this had minor improvements but it didn't return the standards from the previous day and as I continued to use it got slower again. I figured this was the sign of a heating problem to which I went about replacing the thermal paste and it seemed to have improvements but I was occasionally getting the system thread igdkmd64 BSOD, still not up to standards.

bringing us to today when I got of work I found I couldn't run the computer for much longer than 20 minutes without the BSOD mentioned popping up, checking my system showed that my CPU was running at 90 + and from my research igdkmd64 has to do with intel graphics drivers and I have followed guides on how to get rid of them and how that should at least fix the bsod issue but it hasn't.

Is this BSOD a result of the heating issue? any suggestions on how to go about fixing it?

Specs

graphics: gtx 970

motherboard: z77 extreme4

processor: intel core i5-3570k

also don't know if it matters but my cooling system is a corsair hydro series h100i which seems to be working, fans are spinning but I guess I dont really know whats going on with the rest of it since its a closed system.
 

A:overheating cpu and system thread exception not handled bsod

Read other 16 answers
RELEVANCY SCORE 56

This error has happened a couple times before, but today it happened twice all within a few minutes of each other.

A:BSOD system thread exception not handled atikmdag-sys

The report folder is empty. Please retry with these instructions:
Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum):
Eight Forums: Blue Screen of Death (BSOD) Posting Instructions
Ten Forums: Solved BSOD - Posting Instructions - Windows 10 Forums

Read other 1 answers
RELEVANCY SCORE 56

Hello.

I'm using a asus k450j laptop, the laptop only have a few months so its almost new, it's rare happening bsod, this time happened while seeing a movie.

I hope that this thread is well made.

With my best regards.

A:BSOD System Thread Exception Not Handled [AsusTP.sys]

C: drive only has about 11% free space. Windows likes 15% free space in order to perform stuff "behind the scenes" without adversely affecting the system's performance. Please free up 15% on ALL hard drives (you can get away with 10% on larger drives and won't notice a large performance penalty)

Many Windows Update failures in MSINFO32. Please ensure that you have ALL available Windows Updates. If you have problems with Windows Updates, please post over in the Windows Updates and Activation forums: Windows Updates & Activation - Windows 8 Forums

Out of 5 memory dumps there were 5 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- missing Windows Updates
- compatibility issues (3rd party hardware/drivers), older systems, or even pirated systems
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or Hardware Diagnostics ).

Please get a head start on the hardware diagnostics - they are located here: Hardware Diagnostics

Please note the drivers below that date from before the rel... Read more

Read other 1 answers