Over 1 million tech questions and answers.

Windows 7 Update Error, Error Code 8024DFFE

Q: Windows 7 Update Error, Error Code 8024DFFE

Hi -
I'm not getting Windows Update to run. HP p6240f, Windows 7, 64-bit OS
When I go to shutdown, the shutdown button has an orange shield that indicates it wants to update.
If I go to Windows Update and and say "Check for Updates", it tells me to Install new Windows Update software. I press Install Now and get "windows could not search for new updates. Error found Code 8024DFFE Windows Update encountered an unknown error". When I press "Get Help with this error", I select Windows Update Troubleshooter, which opens a Diagnostics Troubleshooting Wizard, which opens "Window Update, find and fix problems with Windows Update", which runs a repeating cycle of Detecting problems, collecting files, checking registry, Resolving problems .... over and over until it finishes eventually saying that it was not able to fix all the problems. In particular is a new "Windows Update error 0x80070490(2014-08-29-T-09_02_42P)". I attach the picture. I've done this a bunch of times, including rebooting to see if that matters.

This happened a week ago and the same thing happened as in the preceding paragraph, except that afterward - even though it gave all the same error codes - the Windows Update successfully ran.

I found a suggestion on a MS Windows site to run (in an administrator's Dos window) sfc /SCANNOW, which takes a long time to run and I did so and it found nothing and still the problem exists.

I found a note from a Google search that said to do something with my firewall, but I couldn't understand it. I use Avast Antivirus and Comodo Firewall.

I'll monitor this post and will do my best to stay on top of proposed solutions. I always appreciate the help I get here.

Many thanks in advance.
Doug8765

RELEVANCY SCORE 200
Preferred Solution: Windows 7 Update Error, Error Code 8024DFFE

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Windows 7 Update Error, Error Code 8024DFFE

Hi. Firstly, thanks for the info. I had encountered the same problem with windows update error 8024DFFE on my Acer 4830, Win7 64bit 2 days ago and was trying to find a solution online without any success. But then I came across ur post and realized that I have a similar configuration as you. I also uses comodo firewall and avast antivirus. This led me to think that either one of them is the problem. I disable the firewall and can now check for updates. How that helps.

Read other 6 answers
RELEVANCY SCORE 83.6

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS Log
CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran
Malwarebytes
JRT.exe
Adwcleaner
Hitmanpro_x64

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

A:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

http://www.sysnative.com/niemiro/apps/SFCFix.exe
http://go.microsoft.com/fwlink/?LinkID=52012
and sfc /scannow

copy/paste the results please.

Roy

Read other 1 answers
RELEVANCY SCORE 79.6

I was given an HP Compaq Presario C500 that was headed for the garbage because it would not connect to the internet. After running several scans ESET online scanner came up clean. Installed Microsoft Security Essentials and installed SP1, and can't get it to install SP2. I keep getting error code 80070017 / Windows Update encountered an unknown error.

I would prefer to reformat but Recovery Manager restarts back into Windows and I have no disks.

Can provide a long list of what has been done if needed including WU Modules (Normal Mode) and WU Components fixes. Permissions point in every which way but the correct way!

Any help would be much appreciated!

Free space is presently @ 42.3 GB of 68.9 GB on C: Drive (started out with 7.3 GB's free space! )
and 4.91 GB free of 5.53 GB on Presario_RP (D)

Specs as follows:
Vista Home Basic
Intel (R) Celeron (R) MCPU
520@ 1.60GHz 1.60 GHz
512 MB RAM
32-bit OS
Denied access to the CBS folder itself though can access CheckSUR.log which I am including along with sfcdetails.

=================================
Checking System Update Readiness.
Binary Version 6.0.6001.22375
Package Version 5.0
2010-10-04 19:57

Checking Deployment Packages

Checking Package Manifests and catalogs.

Checking package watchlist.

Checking component watchlist.

Checking packages.

Checking component store
Summary:
Seconds executed: 2478
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.0.6002.224... Read more

A:Error code 80070017 / Windows Update encountered an unknown error

Checking Component Store
(f) CSI ReadFile Failed 0x00000017 winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990\wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990
(f) CSI Payload File Corrupt 0x00000000 wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990



You have corrupted C:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f699
folder thus this issue with updates ,I'm not fully sure it's only issue with wcp.dll or with full folder.For precaution I recommend replace all files in this folder.

How to fix:

1.First prepare special recovery disk Create a Recovery Disc
and make sure boot order in your BIOS is CD-ROM,C,A
(if you don't know how to to do that then check your computer manual)

2.Download attached to post FixPacks.zip file -in zip file is packed Packs folder -you have to unpack it and place directly on C: exactly as I show below:

Click this bar to view the full image.
3.Boot burned special recovery disk (if you don't have Vista DVD instead use special recovery disk )
Choose language>>Repair Computer>>WinRE>>command prompt

and type:

robocopy C:\Packs C:\ /E /IS

press ENTER

del C:\Windows\Logs\CBS\*.*

press ENTER

4.Back to your system and run Readiness Tool again.
5.Try install SP2 from Microsoft Dow... Read more

Read other 49 answers
RELEVANCY SCORE 79.6

Hi,
I have been having some recurring problems with the attempts to install some automatic windows updates.

Security Update for Microsoft Office Acess 2007
Security Update for Microsoft Office Outlook Junk Email Filter

I am not able to install these updates, maybe any other updates in general. After attempting the install the following install window says, "Windows Update encountered an unknown error." Next to it an error code 80070643. Microsoft provides a solution to the problem, by re-installing Microsoft NET. Framework. They also provide a link to the program NET. Framework cleanup tool that enables you to uninstall NET. Framework, and it's components.

I followed Microsoft's instructions to solve the issue, though I've been put at a standstill. I have used the NET. Framework Cleanup tool to uninstall NET. Framework and it's components (states that it uninstalls all versions, 1.1 SP1 1.1, 2.0, 3.0, 3.5.) Then afterwards instructed to reinstall NET. Framework, specifically in an order, 3.5 then, 1.1, then 1.1 SP1. I start with 3.5, then as the installation starts it says that to contiunue installation I must turn off or on windows features in the Control Panel. I do so and turn off all Windows features. Then continue and it again states to turn off features in the Control Panel.

I wasn't able to continue the process, and I am also concerned that this is the same error that made me unable to install Microsoft Security Essentials, (as t... Read more

A:Error Code 80070643, Windows 7 Update error, can't install updates.

Hello?
Waiting for a day no one seems to be replying.
 

Read other 1 answers
RELEVANCY SCORE 79.6

I have been having problems installing 8 updates since early May 2012. I am getting the error code in the title line.

The updates are:

[LIST][*]Security Update for Microsoft Office 2007 suites (KB2596672)[*]Security Update for Microsoft Office 2007 suites (KB2596792)[*]Security Update for Microsoft Office 2007 suites (KB2596880)[*]Security Update for Microsoft Office 2007 suites (KB2597162)[*]Security Update for Microsoft Office 2007 suites (KB2597969)[*]Security Update for Microsoft Office Excel 2007 (KB2597161)[*]Security Update for Microsoft Office Word 2007 (KB2596917)[*]Update for Microsoft Office Outlook 2007 Junk Email Filter (KB2687267)

I have run FixIt, but to no avail. I have also turned off services and rebooted and ran Windows Update and still got this error.

Do I need to just skip these updates, or somehow troubleshoot this and fix it. If I need to fix it, I need help.

Regards, and thanks.

Read other answers
RELEVANCY SCORE 79.2

When i try to install my windows update, i always get both error code  800F0900 and 800B0100. i tried installing the updates manually, used MS Fix it and the system update readiness tool. I use sfc /scannow and it says  "No integrity violations found". Still error. Can anyone help? I have uploaded my CBS zipfile to googledrive http://tinyurl.com/ogyfd3y.(Since datahost is not working.)  and attached the sfc text file overhere.
Hope you guys can help me solve it
 
This is my Farbar scan.
 
Farbar Service Scanner Version: 26-07-2015
Ran by Finance Server (administrator) on 19-09-2015 at 17:00:41
Running from "C:\Users\Finance Server\Downloads"
Microsoft Windows 7 Ultimate  Service Pack 1 (X64)
Boot Mode: Normal
****************************************************************
 
Internet Services:
============
 
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.
 
 
Windows Firewall:
=============
 
Firewall Disabled Policy: 
==================
 
 
System Restore:
============
 
System Restore Policy: 
========================
 
 
Action Center:
============
 
 
Windows Update:
============
 
Windows Autoupdate Disabled Policy: 
============================
 
 
Windows Defender:
==============
WinDefend Service is not running. Checking... Read more

A:Error code 800F0900 and 800B0100 windows update error

Please download and run the Windows Update Troubleshooter.
 
Clicking on the link above will start the download automatically.
 
Please post the results in your topic.  Do not use a host website to post this.  If the information needs to be downloaded I will not do this.  I will not download anything to my computer unless I know exactly what it contains.

Read other 5 answers
RELEVANCY SCORE 79.2

When i try to install my windows update, i always get both error code 800F0900 and 800B0100. i tried installing the updates manually, used MS Fix it and the system update readiness tool. I use sfc /scannow and it says "No integrity violations found". Still error. Can anyone help? I have uploaded my CBS zipfile to googledrive CBS.rar - Google Drive. (Since datahost is not working.) and attached the sfc text file overhere.

I have tried Windows Update Troubleshooter then tried windows update again and a new error Code 80246007 appear.
Hope you guys can help me solve it.

This is my Farbar scan.

Farbar Service Scanner Version: 26-07-2015
Ran by Finance Server (administrator) on 19-09-2015 at 17:00:41
Running from "C:\Users\Finance Server\Downloads"
Microsoft Windows 7 Ultimate Service Pack 1 (X64)
Boot Mode: Normal
****************************************************************

Internet Services:
============

Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.


Windows Firewall:
=============

Firewall Disabled Policy:
==================


System Restore:
============

System Restore Policy:
========================


Action Center:
============


Windows Update:
============

Windows Autoupdate Disabled Policy:
============================


Windows Defender:
==============
WinDefe... Read more

Read other answers
RELEVANCY SCORE 78.4

When i try to search for new updates on windows update i get this error code : 800F0900.
I have used MS Fix it and the system update readiness tool. Still error. Can anyone help?
 
I saw in a old post somebody used the CheckSUR.persist.log to fix it. I can upload mine if needed

A:Error Code 800F0900 Windows Update Error

Hi to BleepingComputer,
 
 
Let's see what we can find...
 
  Check Windows System files integrity
open the Command Prompt as Administrator (Tutorial)
type the following command and press Enter:
sfc /scannow
Note: This may take some time to finish.if it doesn't say "No integrity violations found" them do this:
In the command prompt window, type or Copy & Paste the following:
findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >"%userprofile%\Desktop\sfcdetails.txt"

Close the command prompt.
Attach to your post the sfcdetails.txt file that was just placed on your Desktop
You can safely delete the sfcdetails.txt file afterwards if you like
 
Check some windows critical services...
Farbar Service Scanner (FSS)
Download Farbar Service Scanner and save the file to the Desktop.
Run FSS
Check all the options
click Scan
Post the generated log in your reply.

Read other 9 answers
RELEVANCY SCORE 76.8

Attachment 290231
i having problem with this windows update

here is zip for CBSAttachment 290230


thanks!!!

A:windows update error (code 9c48 and code 9c57)

You haven't run the CheckSUR tool.

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

Read other 6 answers
RELEVANCY SCORE 74.4

I am unable to install Windows updates as I get an error " Code 64C : windows update encountered an unknown error..
Same with Code 66A
Please help.
I am unable to also install Windows Live essentials
I am using Windows 7
Greg

Read other answers
RELEVANCY SCORE 74

When I try to install KB3182373, a "Security Update for Microsoft Silverlight", Windows Update reports failure with the message "Code 643 Windows Update encountered an unknown error".
I ran WindowsUpdateDiagnostic.diagcab. It reported that "Troubleshooting couldn't identify the problem".
What can I do to fix this? I'm running Windows 7 Professional.

Read other answers
RELEVANCY SCORE 74

Hello,

I recieve error C80003FA whenever I do a Windows Update run. It doesn't get past the stage of checking for updates.

I've tried several fixes including:
- Waiting 15 minutes and running Windows Update again.
- Letting Windows Update run on its own schedule.
- SFC /Scannow
- Renaming the Catroot2 Folder.
- Running 3 different Fixit tools.
- Clean windows install.

After each and every one of those fixes I've tried windows update and I still get error C80003FA.

SFC Scannow has previously said no errors, but the last run through it said there were unfixable errors. I've got the log, though for brevity's sake I will keep it until someone asks for it.

Any ideas?

Thanks.

A:Windows Update fails in Update Check. Error code C80003FA.

Clean windows install doesn't fix it? You must be blocked, maybe your firewall???

Read other 9 answers
RELEVANCY SCORE 74

Hey all,

So I am currently reinstalling Windows on my dad's old laptop after the hard drive decided up die on us, and I stumbled on a problem that's a bit too hard for me to fix.

Namely, I am completely unable to install any Windows Update. Not even MSE will install.

I tried running SURT, but got error code 0x8000247
I also tried running SFC /SCANNOW, it ran the verification fase until 98% and then stated that there where unfixable problems.

The displayed error codes are:
In WU: "8024A000"
In SURT: "0x8000247"
Whilst installing MSE: "0x80070643".

Attached you will find CBS.log and MSINFO with my system specs.
Cheers and many thanks in advance,
Nommy

CBS.log MSINFO32.nfo

A:Windows Update error code 8024A000; unable to install any update.

That's very reminiscent of similar errors in Win7 - and I wouldn't be surprised to see it being non-genuine.
Please post an MGADiag report BEFORE doing the below potential fixes.

This may simply be caused by a bad set of Intel Storage Matrix Technology drivers -

Installing the Intel Drivers
try downloading and installing them from here -
https://downloadcenter.intel.com/Det...&DwnldID=17882

(IATA89ENU.exe)

Once complete, please reboot twice, then post another MGADiag report.


If nothing has changed, try this...

Please run the following commands in an Elevated Command Prompt

NET STOP CRYPTSVC
REN C:\WINDOWS\SYSTEM32\CATROOT2 CATROOT2OLD
NET START CRYPTSVC

once complete, leave the system alone for at least an hour to rebuild the database, then reboot, and run another MGADiag report and post the results.

If neither of them work, we'll re-evaluate.

Read other 9 answers
RELEVANCY SCORE 74

Hi everybody

I get windows update error code 2 on installing Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Vista, Server 2008, Server 2008 R2 x64 (KB2978128)
I have also some other errors installing Internet Explorer 11.

I have used "sfc /scannow" command but it didn't find any integrity violations. the CBS log is attached.

I have also used SUR and the log file can be found attached to this post.

Any help is appreciated.

A:Windows update error code 2 on installing security update .NETF 4.52

Not as bad as I thought from the file size of the CheckSUR log...


Code:
Summary:
Seconds executed: 626
Found 40 errors
CSI Manifest All Zeros Total count: 40
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-ie-ieshims_31bf3856ad364e35_10.2.9200.20916_none_ae6c710c2475d6dd.manifest
winsxs\manifests\amd64_microsoft-windows-ie-ieshims_31bf3856ad364e35_10.2.9200.16798_none_c5578c400ab73d40.manifest
winsxs\manifests\amd64_microsoft-windows-scripting-jscript9_31bf3856ad364e35_10.2.9200.20916_none_ab08cdc647ee4ac0.manifest
winsxs\manifests\amd64_microsoft-windows-ie-extcompat_31bf3856ad364e35_10.2.9200.20916_none_a38eed1960d6da24.manifest
winsxs\manifests\amd64_microsoft-windows-i..ersandsecurityzones_31bf3856ad364e35_10.2.9200.16798_none_32ad7426474825c0.manifest
winsxs\manifests\amd64_microsoft-windows-ie-ratings_31bf3856ad364e35_10.2.9200.16798_none_455c9a9ecd397534.manifest
winsxs\manifests\amd64_microsoft-windows-ieinstal_31bf3856ad364e35_10.2.9200.16798_none_66663569022097ee.manifest
winsxs\manifests\amd64_microsoft-windows-ie-extcompat_31bf3856ad364e35_10.2.9200.16798_none_ba7a084d47184087.manifest
winsxs\manifests\amd64_microsoft-windows-js-debuggeride_31bf3856ad364e35_10.2.9200.16798_none_b8c293a66f3311dc.manifest
winsxs\manifests\amd64_microsoft-windows-ie-runtimeutilities_31bf3856ad364e35_10.2.9200.20916_none_ae82eb7016c1044d.manifest
winsxs\manifests\amd64_microsoft-windows-ie-lowreg_31bf3856ad364e35_10.2.9200.20916_none_0f2b73186e1... Read more

Read other 9 answers
RELEVANCY SCORE 73.6

My Windows Update has been failing to update for a while now and I can't seem to find the solution. Here's the run-down of what happens step by step:Launch an update scan for Windows Update
It scans for a few seconds then says:





Quote:
Install new Windows Update software

To check for updates, you must first install an update for Windows Update.



Once I click Install it begins to "Install and Update," but then immediately returns to "Checking for Updates."
The next box I see says:





Quote:
Windows could not search for new updates

An error occurred while checking
for new updates for your
computer.

Error(s) found:
Code 800F081F


This happens every time I've attempted to update. After looking up the error code, I found the main Windows site that gave me the following explaination:
If you receive Windows Update error 800F081F, it means that Windows Update or Microsoft Update cannot determine the cryptographic service provider, or a file Windows Update requires (named catalog store) is corrupted.

I've looked through multiple Windows forums and How-To's and have tried all the fixes I found. SURT, sfc/ scannow, the standalone download for WU, Windows Update Diagnostic, multiple malware scans, and Microsoft Fixit. Ultimately, I always get the same error code, (800F081F).

I should also say this problem has been here for a few months now, and it's becoming more worrisome as more time passes. The longer I... Read more

A:Windows Update fails to update, error code 800F081F

Hi Mookeylee & welcome to Sevenforums.

Please follow Windows Update Posting Instructions

We need to see the logs to determine the cause of the error.

Worst case scenario, and last resort, repair install windows 7. No big deal I just did 2 yesterday win7x64 Home Premium. Brink posted a great tutorial Repair Install.

Read other 3 answers
RELEVANCY SCORE 73.6

Hello,
First, excuse my english, I'm trying my best.

I get error C80003FA whenever I do a Windows Update run.

I did the Windows Update Posting instructions. When I did the SURT installation, it didn't finish and I had to reboot the PC. Then it work.

I've tried sfc /scannow several times before with different results: sometimes finished with no errors, sometimes finish with unfixable errors and sometimes didn't finish at all.

I uploaded the CBS.zip

Hope you can help me, thanks.

A:Windows Update doesn't update. Error code C80003FA

There are no errors in any of the posted logs
Please post the C:\WIndows\windowsupdate.log file.

Please also post the event logs...

Open Event Viewer
click on the Windows logs entry in the left pane to expand it.
Now click on the Application entry - wait while it loads.
Click on 'File' in the menu bar and select Save...

Save the file as Appevt.evtx

Repeat for the System log

then zip both, and upload them.

Read other 9 answers
RELEVANCY SCORE 72.8

After buying a new hard drive and reimaging thumb drive from Dell, I installed Windows 7 Ultimate on a Dell M6400 Precision Laptop. I have everything working except Windows Update will not Update. It has not updated once since the install. Windows Tech
support has not been able to resolve the issue, even with remote assistance. I get the Error Code 0x80070003 after running the Windows Update Diagnostic Tool. Does anyone know how to fix this?

Read other answers
RELEVANCY SCORE 72.8

I didn't see any posts about this, so I hope I am not double posting.

After removing a drive load of viruses, I am still not able to update Windows Vista to Service Pack 1. I have even tried to create a new admin user account in hopes that this would work, but no go. I tried running sfc.exe / scannow from the CMD and it did report that it was unable to repair wextract.exe. Also, the file reportingevents.txt located in %system root%\windows\softwaredistribution\reportingevents.txt lists "Windows Update Client failed to detect with error 0x80070490".
Although, I think Windows Defender can update. I need to take a break.

Acer Extensa 4620-4605
Windows Vista 32-bit Home Premium

Read other answers
RELEVANCY SCORE 72.8

Been using Google and such for a couple months messing with it but cant get update to work. My girlfriend updated from Vista a while ago and I cant crack this! I have done all the differect things I could find from Microsoft to no avail. The fixit program finds something and says its fixed but still doesnt work.

Any ideas you all could give would be great! Thanks.

A:Update for Windows Update Error Code 800700B7

Hello bobo and welcome am no expert mate but take a look at this Windows update KB2532531 gets error code 800700B7 - Microsoft Community

Read other 9 answers
RELEVANCY SCORE 72.4

Since mid October I've been having problems installing windows updates. I always get an error message with a code 646. The failed update is security for microsoft works 8. I've tried some solutions listed in older posts such as the notepad and command prompt, that didn't work. I went to microsoft's website to dowload the update directly from there and that didn't work... what else could I try???
 

Read other answers
RELEVANCY SCORE 72.4

Windows 7 Professional Service Pack 1

I have been trying unsuccessfully to do all of the helps to get Windows Update to check for updates and install. I tried all of the Fixit and Windows Update Troubleshooter batch files, etc. I thought I was making headway this morning when it said updates would install on the next shutdown. So I shutdown. Looks like 57 updates had a failed status. When I ran the check for updates again, I get the following error code:
C80003FA

I googled and really only found the same help items I have already tried, the fixit's etc.

Thanks for any help you can give me.
 

A:Windows Update error code

We know nothing about your computer, other than it's running Windows 7 Professional SP1, so do the following in it.
Download and save the TSG System Information Utility (SysInfo.exe) to the desktop.
After it's been downloaded and saved, double-click it to run it.
Information about your computer will appear.
Return here to your thread, then copy-and-paste the ENTIRE text here.

--------------------------------------------------------------
 

Read other 2 answers
RELEVANCY SCORE 72.4

any way to fix this without reinstalling windows 7

A:Windows update error CODE 52F

Hi,

Code 52F is related to Microsoft Office updates - please see if the links here help.

Windows Update error 52F

Regards,
Golden

Read other 2 answers
RELEVANCY SCORE 72.4

Everytime i go to update windows, i get error code when trying to do update for framework 4.0. I have been trying to fix this for a while now, and i have tried microsoft fix it tool, and many other of the microsoft tools that they have and none of them have worked.

Please someone help with this

A:Windows update error code 643

Pleasefollow the WindowsUpdate Posting Instructions and postthe requested data

If thefile is too large (8MB compressed), remove the older CBSPersist cab files untilthe final file is below the limit - you can always post them separately afterzipping them. (the forum doesn't allow the upload of bare CAB files, for anumber of reasons)

Pleasealso post the C:\Windows\windowsudpate.log file

Read other 1 answers
RELEVANCY SCORE 72.4

I cannot download a particular windows update, Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86
Download sizTech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, x64 Family 6 Model 15 Stepping 11
Processor Count: 4
RAM: 2045 Mb
Graphics Card: NVIDIA GeForce 8600 GTS, 256 Mb
Hard Drives: C: Total - 171263 MB, Free - 114972 MB; D: Total - 56854 MB, Free - 0 MB; E: Total - 10239 MB, Free - 5613 MB;
Motherboard: Dell Inc. , 0CT017, , ..CN7082977I01EL.
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated: Yes, On-Demand Scanner: Enablede: 9.4 MB. It says error code 490 (an unknown error). Can anyone help fix this problem?
 

Read other answers
RELEVANCY SCORE 72.4

I think it would be best if I just reference the thread where this whole thing started bc I have another thread running where someone has tried to help me.

http://www.techsupportforum.com/f100...ml#post2815448

thx for any assistance you can offer! :)

A:Windows update Error code 646.

Hi -

The first thing I would suggest that you try is removing PC-cillin Internet Security as its firewall can interfere with Windows Updates.

Trend Micro removal --> http://esupport.trendmicro.com/1/How...n-my-comp.aspx

Reboot upon completion.

Install MSE --> http://www.microsoft.com/security_essentials/

Try Windows Updates --> www.update.microsoft.com

Regards. . .

jcgriff2

.

Read other 2 answers
RELEVANCY SCORE 72.4

Hi I was wondering if anyone knows how to fix this windows update problem. The windows update window says Error code 490, I am also receiving error 800736B3 as noted below

Any help someone can lend is greatly appreciated

Thanks

A:Windows update error code 490

after successfully getting that update to install which I didn't think was the entire service pack, I rebooted and another update pops up for Win 7 SP1 and that one throws another error. 800736B3

Read other 8 answers
RELEVANCY SCORE 72.4

Hello all I am scouring the internet for answers but I can't seem to find any so I thought I should ask the Gurus down at the Windows Vista Forums. Anyways I am trying to install the Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86 and all I get is this error. Does anyone know how I can fix this?

A:Windows Update Error Code 643

Hello Peacemaker,

When you try to install an update for the .NET Framework 1.0, 1.1, 2.0, 3.0, or 3.5, you may receive Windows Update error code "0x643" or Windows Installer error code "1603"

RESOLUTION

To successfully install the update, uninstall all the versions of the .NET Framework on the computer, and then reinstall all the versions of the .NET Framework on the computer. You may have to work through more than one of the following methods.

Method 1: Manually remove and reinstall .NET Framework
To manually remove and reinstall the .NET Framework, follow these steps:

1. Remove the .NET Framework.
1. Click Start, and then click Control Panel.
2. Double-click Add or Remove Programs.
3. Note each version of the .NET Framework that is already installed on the computer. Then, uninstall all the versions of the .NET Framework.
4. When you are prompted, restart the computer.
Method 2. Use the Windows Installer CleanUp Utility to clean up the MSI database state for all the versions of the .NET Framework.

1. Download the Windows Installer CleanUp Utility. The following file is available for download from the Microsoft Download Center: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
2. Install the Windows Installer CleanUp Utility as an administrator or as a user account that is a member of the local Administrators group.
3. Click Start, poin... Read more

Read other 8 answers
RELEVANCY SCORE 72.4

Hi all
first post, hoping you can help where my searches on Google have failed!!!

Basically running Vista, and unable to run any of the Windows Updates, each time it brings up the same error, Code 6D9E.

The only mention I have found is to uncompress the MySQL fiel in programs which I have done, but still no joy. Have tried to run update in safemode, but it wont allow me do this this either

HELP!

(Did that sound desperate...!)

Thanks

Mike
 

A:Windows Update Error Code

hi here are a couple of things to look at http://support.microsoft.com/kb/906602also here http://support.microsoft.com/ph/6527and here http://support.microsoft.com/kb/822798 maybe one will be of help
 

Read other 2 answers
RELEVANCY SCORE 72.4

Fellow code crunchers,

Every once and a while I will have a download waiting from HP in Windows update. I will try and download it, but it always fails. I have a HP Laser Jet 600 M601 and I believe that's what the download states it is for. Below is the error message I keep getting every time I try and download it.

HP Inc. - Other hardware, Printer - HP LaserJet Enterprise 600 M601, M602 & M603 printer series (DOT4PAR)
Installation date: ‎12/‎14/‎2016 7:15 AM
Installation status: Failed
Error details: Code 800F020B
Update type: Optional
HP Inc. Other hardware, Printer software update released in May, 2013

I am not too distressed about this, but I am curious to know what is happening.

Thanks for your answer in advance.

John

A:error code from windows update

Error details: Code 800F020B. This apparently indicates that the device does not exist. So the update may not be applicable to your printer.

If you are not distressed about it & your printer is working well, it might be best to just hide the update, so you don't keep getting the update, & forget about it.

If you really want the update it's always best to get updates directly from the manufacturer, so go to their website & check for any updates that are applicable to particular model printer.

Read other 1 answers
RELEVANCY SCORE 72.4

hi i have got a windows 7 32 bit pc that had a virus on a few months ago managed to get rid of the virus but now i am getting error codes 800b0100 the updates are security updates i have check the log that i have uploaded here and there are 30 corrupt files on my system and i have no idea how to fix them any help would be great thanks in advance

heres log Attachment 252207

i have tried many other fixes but none have worked am at a loss

A:windows update error code

You appear to be using AVG? what other security software do you have installed?
here are a number of problems showing in the CheckSUR report....

Code:
Unavailable repair files:
servicing\packages\Package_1_for_KB2770660~31bf3856ad364e35~x86~~6.1.1.0.mum
servicing\packages\Package_1_for_KB2770660~31bf3856ad364e35~x86~~6.1.1.0.mum
servicing\packages\Package_2_for_KB2753842~31bf3856ad364e35~x86~~6.1.1.2.mum
servicing\packages\Package_2_for_KB2753842~31bf3856ad364e35~x86~~6.1.1.2.mum
servicing\packages\Package_37_for_KB2758857~31bf3856ad364e35~x86~~6.1.1.0.mum
servicing\packages\Package_37_for_KB2758857~31bf3856ad364e35~x86~~6.1.1.0.mum
servicing\packages\Package_37_for_KB2779562~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_37_for_KB2779562~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_38_for_KB2758857~31bf3856ad364e35~x86~~6.1.1.0.mum
servicing\packages\Package_38_for_KB2758857~31bf3856ad364e35~x86~~6.1.1.0.mum
servicing\packages\Package_38_for_KB2779562~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_38_for_KB2779562~31bf3856ad364e35~x86~~6.1.1.1.mum
servicing\packages\Package_39_for_KB2758857~31bf3856ad364e35~x86~~6.1.1.0.mum
servicing\packages\Package_39_for_KB2758857~31bf3856ad364e35~x86~~6.1.1.0.mum
servicing\packages\Package_for_KB2753842_SP1~31bf3856ad364e35~x86~~6.1.1.2.mum
servicing\packages\Package_for_KB2753842_SP1~31bf3856ad364e35~x86~~6.1.1.2.mum
servicing\packages\Package_for_KB2753842~31bf3856ad364e... Read more

Read other 9 answers
RELEVANCY SCORE 72.4

hi every time i go to the windows update site an error code appears
the code is 0x80240001D, what is this?
i also had a update that would not install
 

Read other answers
RELEVANCY SCORE 72.4

For more than one year, my automatic Windows Update process has unsuccessfully tried to install (around once a day !) KB3001652 (Visual studio 2010 Tools for Office Runtime). I haven't seen any problem with other automated Updates of Windows, MS Office, NET.Framework, etc....

I have tried first "Fix-It" which doesn't produce any error message. Secondly I launched "SURT", which tells me "This update doesn't apply to your computer". "SFC /scannow" doen't report any violation issue.I don't know how to do for resolving this problem.

I'm using Windows 7 Professional 64 bits SP1. Norton (NIS, the most recent version), "ShellfolderFix" and also Tune-Up utilities are installed on my PC. I have also tried to install KB3001652 manually after having deactivated the firewall and the "Auto-Protect" functions of Norton : no success.

Thanks for your help (and sorry if the English translation of the French messages is aproximate)
XRay78 - Crespi?res - France

Read other answers
RELEVANCY SCORE 71.6

FYI if anyone else encounters this problem, try the following:

1. Turn off Windows Updates and disable the 'Windows Update' service.

2. Delete everything under the following folders;
 
C:\Windows\SoftwareDistribution\Download
C:\Windows\SoftwareDistribution\DataStore
  
3. Download this Microsoft fixit from their site. Launch and select the
Aggressive option.

4. When prompted, restart Windows.

5. Enable Windows Updates and it should successfully download and install the failed updates.

Note: Prior to this, I had tried the System Update Readiness Tool for Windows 7 (KB947821) [May 2013], but it didn't work.

As an alternative, you could perhaps skip Step 3, restart after Step 2 and proceed with Step 4.
 

Some may have other solutions that have helped them, it'll be good to read to assist others.
 
Hope this helps.

Read other answers
RELEVANCY SCORE 71.6

Every time I try to check for updates I get this error code seconds after checking for updates. It is a fresh install of Windows 7 Home Premium x64 SP1. The error code in the bottom left is always '800b0100'. SFC came back with no errors. I will attach the SURT log, it has 8 errors in it, but I do not quite understand what they mean.

A:Windows update error code 800b0100

From your CheckSUR log:-

Code:
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-w..oyment-languagepack_31bf3856ad364e35_7.6.7600.256_en-us_7f225668bfd2dbf0.manifest
winsxs\manifests\x86_microsoft-windows-w..oyment-languagepack_31bf3856ad364e35_7.6.7600.256_en-us_2303bae507756aba.manifest
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~en-US~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-MiniLP~31bf3856ad364e35~amd64~en-US~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux~31bf3856ad364e35~amd64~en-US~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux~31bf3856ad364e35~amd64~~7.6.7600.256.mum
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~en-US~7.6.7600.256.cat
servicing\packages\WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~~7.6.7600.256.cat
servicing\packages\WUClient-SelfUpdate-Aux-MiniLP~31bf3856ad364e35~amd64~en-US~7.6.7600.256.cat
servicing\packages\WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256.cat
servicing\packages\WUClient-SelfUpdate-Aux~31bf3856ad364e35~amd64~en-US~7.6.7600.256.cat
servicing\packages\WUClient-SelfUpdate-Aux~31bf3856ad364e35~amd64~~7.6.7600.256.cat
I'll post a fix protocol later, but it may require more than just corre... Read more

Read other 6 answers
RELEVANCY SCORE 71.6

I have been getting the windows update error code 80070002 for a while now.

I ran SURT and did not get any errors.
When running sfc / scannow I get the error "Windows Resource Protection could not perform the requested operation." after a few seconds.

here is a zip of my CBS dir
https://drive.google.com/file/d/0B9y...it?usp=sharing

I'm not positive but I think there is some corruption in my HKLM\COMPONENTS

I have run Chkdsk /r /f and did not get any bad sectors

Thanks for any help.

A:windows update error code 80070002

I should warn you that my track record n fixing this type of error is not good (yet!) - mostly because its rare.
Having said that, it does look like there is corruption in your registry.

I need to have a look at your COMPONENTS registry hive

Please copy the C:\Windows\System32\config\COMPONENTS file (no extension) to your desktop and then compress it - upload the compressed file to your favoured fileshare site (preferably Dropbox or OneDrive) and post a link.

Read other 4 answers
RELEVANCY SCORE 71.6

When I try to install update "Synaptics - Input - Synaptics PS/2 Port TouchPad" it fails every time.

I have tried :- sfc/runnow

and going to:- start/computer/manage/services/applications/services. Locate Windows update service. Stop/start.

Neither worked.

Any help would be appreciated.

A:Windows Update error code 80240016

Try this:
Windows Update - Reset - Windows 7 Forums

Read other 13 answers
RELEVANCY SCORE 71.6

Hi everyone,

since round about 2 weeks I'm facing the following problem:
I've realized the problem by accident, because Avast told me to update my Flashplayer and redirected me to Windows Updates -> after searching for updates for a few seconds, the following error code appears: Cannot search for updates - error code 8024402F.

Now this is what I've tried in the past 2 weeks to solve the problem, but apparently without success :

Microsoft Fix itFRST Scan to exclude any malware behaviourautomatical windows trouble shootingdouble checked if any internet settings have changed (Proxy or smth.)windows repair (tweaking)sfc scannow while system is runningsfc scannow at boot (using your tutorial which is great btw.) 3 times with restarts in betweendism check health / scan health / restore healtheven tried to do a "refresh" of the system, but that's simply not possible - it comes with an error but no error code and no way how to fix it

Looking at the sfc scan, there is a component, which cannot be repaired by windows (see logfile of sfc below). Apparently I don't have an image backup to adjust the corrupted file

I hope you guys can help me, and I hope the solution is not reseting windows, because I cannot get rid of the feeling, that it's just a minor thing to repair, but I simply just don't see it.

Short info to the system I use:
Windows 8.1 (bought as windows 8 one year ago and then upgraded to win 8.1)
I'm using Avast as an AV and windows firewall.

Thank's a lo... Read more

A:Windows Update error code 8024402F

Are you getting Code 8024402F when you try to download? I get that still when I manually check for updates sometimes, but after a few tries it catches. You can also go here to microsoft support and try the windows automated update troubleshooter. Also try here too. If they don't help open notepad and copy and paste thisCode:

Code:
regsvr32 c:\windows\system32\vbscript.dll /sregsvr32 c:\windows\system32\mshtml.dll /s
regsvr32 c:\windows\system32\msjava.dll /s
regsvr32 c:\windows\system32\jscript.dll /s
regsvr32 c:\windows\system32\msxml.dll /s
regsvr32 c:\windows\system32\actxprxy.dll /s
regsvr32 c:\windows\system32\shdocvw.dll /s
regsvr32 wuapi.dll /s
regsvr32 wuaueng1.dll /s
regsvr32 wuaueng.dll /s
regsvr32 wucltui.dll /s
regsvr32 wups2.dll /s
regsvr32 wups.dll /s
regsvr32 wuweb.dll /s
regsvr32 Softpub.dll /s
regsvr32 Mssip32.dll /s
regsvr32 Initpki.dll /s
regsvr32 softpub.dll /s
regsvr32 wintrust.dll /s
regsvr32 initpki.dll /s
regsvr32 dssenh.dll /s
regsvr32 rsaenh.dll /s
regsvr32 gpkcsp.dll /s
regsvr32 sccbase.dll /s
regsvr32 slbcsp.dll /s
regsvr32 cryptdlg.dll /s
regsvr32 Urlmon.dll /s
regsvr32 Shdocvw.dll /s
regsvr32 Msjava.dll /s
regsvr32 Actxprxy.dll /s
regsvr32 Oleaut32.dll /s
regsvr32 Mshtml.dll /s
regsvr32 msxml.dll /s
regsvr32 msxml2.dll /s
regsvr32 msxml3.dll /s
regsvr32 Browseui.dll /s
regsvr32 shell32.dll /s
regsvr32 wuapi.dll /s
regsvr32 wuaueng.dll /s
regsvr32 wuaueng1.dll /s
regsvr32 wucltui.dll /s
regsvr32 wups.dll /s
regsvr32 wuweb.dll /s
regsvr32 jscr... Read more

Read other 23 answers
RELEVANCY SCORE 71.6

Trying to allow Windows Update to search for some of my drivers, and I get error code 80070103 when trying to download and install. What's going on with this?

A:Windows Update - Error Code 80070103

Please follow the Windows Update Posting Instructions and post the requested data

Read other 1 answers
RELEVANCY SCORE 71.6

Windows has never been able to install this update, and this has gone on for about a week.
ALSO: I did indeed search other threads, none has resolved this for me.
Updates trying to be installed:
-KB2419640
-KB2698365
-KB976932

When Windows update is ran, a popup is shown saying

"Installation was not successful

A system error prevented the service pack from installing. Please download and run the "Check System Update Readiness" tool at System Update Readiness Tool fixes Windows Update errors in Windows 7, Windows Vista, Windows Server 2008 R2, and Windows Server 2008

If the "Check System Update Readiness" tool doesn't fix the problem, visit the Microsoft Website for more information. (Details)"

along with the error code 800B0100 in "errors found" located under windows update.

I have tried:

-Check System Update Readiness Tool
Installation of Hotfix for Windows (KB947821). Fails and Completes randomly. WU still produces same error: Error: TRUST_E_NOSIGNATURE (0x800b0100)
-Microsoft FixIt and Troubleshooting
Both say Repair Windows Update Components - fixed
-Downloading the Updates from the Download Center
Produces the same error as WU: Error: TRUST_E_NOSIGNATURE (0x800b0100)
-SFC /SCANNOW
No errors found.

I am running Windows 7 Home Premium 64-Bit. The last update installed was KB2553371, according to update history.

A:Windows Update Error Code 800B0100

Please run a full CHKDSK and SFC scan....
Click on Start > All Programs > Accessories
Right-click on the Command Prompt entry
Select Run as Administrator and accept the UAC prompt - the Elevated Command Prompt window should pop up.

At the Command prompt, type
CHKDSK C: /R
and hit the Enter key.

You will be told that the drive is locked,
and the CHKDSK will run at he next boot - hit the Y key, and then reboot.
The CHKDSK will take a few hours depending on the size of the drive, so be patient!
After the CHKDSK has run, Windows should boot normally (possibly after a second auto-reboot) -

then run the SFC.

SFC -System File Checker - Instructions
Click on Start > All Programs > Accessories
Right-click on the Command Prompt entry
Select Run as Administrator and accept the UAC prompt - the Elevated Command Prompt window should pop up.
At the Command prompt, type
SFC /SCANNOW
and hit the Enter key

Wait for the scan to finish - make a note of any error messages - and then reboot.
Copy the CBS.log file created to your desktop (you can't manipulate it directly) and then compress the copy and upload it as an attachment to your reply

Please also download a new copy of the CheckSUR tool (a new version was released at the end of last week), run that, and upload the CheckSUR.log and CheckSUR.persist.log files

Read other 2 answers
RELEVANCY SCORE 71.6

The error code is 800B0100

A:Windows Update SP1 error code 800B0100

Hello Duranox and welcome to the forums

Windows Update Package Replacement

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Please download the attached file, Packs.zip and save this to your Desktop.
Right-click on the file and select Extract All...
Tick the box labelled Show extracted files when complete then click Extract
A window will open showing two folders, Manifests and Packages
Open the Manifests folder and copy the files into the following folder (if there are any files)

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Open the Packages folder and copy the files into the following folder (if there are any files)

C:\Windows\Temp\CheckSur\Servicing\Packages

Run the System Update Readiness Tool (SURT) again
When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:

C:\Windows\Logs\CBS\CheckSUR.persist.log
You will probably be shown the error code 0x8024200D after performing this fix, if so, please download and install the update from this link. It must be downloaded using Internet Explorer.

Download: Update for Windows 7 for x64-based Systems (KB2454826) - Microsoft Download Center - Download Details
Download Security Update for Windows 7 for x64-based Systems (KB2785220) from Official Microsoft Download Center
Download Security Update for ... Read more

Read other 8 answers
RELEVANCY SCORE 71.6

Hi, I'm using Windows 8 (not 8.1) on an Acer Aspire V3-571 laptop. I get my internet via the phone line with a TP-Link ADSL modem and wifi-router. I use wifi all the time. For a year and a half since I bought this laptop everything has been fine. I keep my computer clean with Windows Defender, Spybot and Malwarebytes Free. I update them almost every day and run full scans once a week. I haven't had a virus for ages.

But now over the last week or so I get Error Code 80244019 if I try to do Windows Update. I've tried switching off the wifi and using a LAN cable from the router to the laptop, but it's just the same.

But here's the odd thing. I've tried switching off the modem entirely, and, instead, using a plug-in USB modem with a mobile phone SIM card inside charged up with an internet account, and Windows Update works! No problem.

So, Windows Update doesn't like my ADSL modem suddenly after one and a half years of being OK, but, it does like my plug-in USB mobile phone system modem!

I've tried resetting the ADSL modem back to its original factory settings and starting again, but it's still no good. I get the same error code.

Can anyone help?

Thanks!

fred

Read other answers
RELEVANCY SCORE 71.6

Windows update has not worked for me since July of 2012. I have tried to repair the installation via upgrade from the install disk with no success. I have since run the SURT and tried to run SFC with the following error: windows resource protection could not perform the requested operation.

The OS is Windows 7 Ultimate X64. The windows update issue prevents me from installing SP1, IE 9/IE 10, and some other SW as well.

Thanks for any possible solutions.

A:Windows Update Error Code 8008370B

Hello nolimitkemet and welcome to the forums

101 errors to fix - this could take a while! You've got quite a lot of registry corruption which isn't helping matters so let's fix that all up and see where it leaves us.

Upload a file to Dropbox

Note: If you prefer, the same techniques can be applied to your Skydrive however these instructions may not necessarily work for Skydrive.

If you haven't already created a Dropbox account, please do so Here
Although this procedure can be done directly through the website, it is much easier to do so via the Windows client which can be downloaded from the Dropbox website:

https://www.dropbox.com/install
After you have downloaded and installed that, you should now see Dropbox in your Favourites box in Windows Explorer. This is the folder that will be synchronised with the Dropbox servers, anything that you wish to back up online can be put in here, but today we will be using it to transfer files.

To access your Dropbox folder, just click on the link in the top left hand corner of Windows Explorer (accessible from any location - Documents etc.). Alternatively, you can double click on the icon found in your system tray (next to the time). If you are still having issues locating this folder, unless otherwise specified, it can be found under this location: C:\Users\{Your username}\Dropbox
Copy all of the following files to the Public folder in your Dropbox:

C:\Windows\system32\config\COMPONENTS (it has no file extension)


Select al... Read more

Read other 9 answers
RELEVANCY SCORE 71.6

Hello,

I have been trying to update my computer for about 6 months now to no avail. Updates are downloaded, but not installed - - instead I get error code 80070002 and the updates all fail . I have tried using the stand alone installer, and all the recommendations that windows help offered, but no luck. I read through another thread and tried using the MGADiag.exe program and my OS is genuine, but the error code 80070002 comes up repeatedly throughout the report. Please, if anybody knows how to resolve this issue, I would be very appreciative!

A:Windows Update Error Code: 80070002 - Help PLEASE!

80070002 is a File Not Found error. It suggests (to me) a corruption of the downloads. Give this a try (you must be using an adminstrator account for this):

- Go to Start and type "cmd" (without the quotes)
- at the top of the Search box will be an entry for CMD.EXE - right click on it and select "Run as administrator"
- In the black window that appears, type "net stop wuauserv" (without the quotes) and press Enter. Wait until the screen tells you that it's completed successfully. Leave this window open as you'll need it later. If it prompts to stop other services, tell it yes.

- Open up Windows Explorer and navigate to C:\Windows\SoftwareDistribution. Delete the contents of the folder (but not the folder itself).

- Go back to the black window and type "net start wuauserv" (without the quotes) and press Enter.

- Reboot and see if Windows Update works now. Let us know what happens.

Read other 2 answers
RELEVANCY SCORE 71.6

I need help. I just installed Windows 7 Professional on my old PC. It is a clean install. After successfully installed this OS, the major problem that I had encountered is that I cant install updates on my PC. My PC has never been updated because of this problem. Once I click Check updates, a message shows that there is an error occurred while checking updates for my computer. It cant check for updates and the error code is 800B0100. I already followed the steps written on this site http://support.microsoft.com/kb/956702 . I already Run the Windows Update Troubleshooter and run the System Update Readiness Tool. but the problem is still there. My PC cant still check for new updates. I hope somebody here can help me. thank you
 

Read other answers
RELEVANCY SCORE 71.6

Error Code 2: File not found.
The executable name is
C:\Windows\system32\svchost.exe -k netsvcs

A:error code 2 when starting up windows update

Please download the Farbar Service Scanner from

http://www.bleepingcomputer.com/download/farbar-service-scanner/

Right-click on the saved file and select 'Run as Administrator', and tick all the options, then click on the Scan button - copy and paste the report to your response.

Also...
Please follow the Windows Update Posting Instructions and post the requested data

Read other 5 answers
RELEVANCY SCORE 71.6

Hey,

Sorry, I got in the wrong place ....If I am still wrong kick me out.
I have 4 windows updates that failed, and I get the error code 80096001. One update did install, but 4 failed. I tried again three times, and still no luck. Any help would be greatly appreciated. It is almost 2:00am here, and I sleep late... so will check back in the morning.

Thanks, and you all have a good night

A:Windows update error code 80096001

1.Reset WU components in aggressive mode How do I reset Windows Update components?
2.Reset WU modules Repair & Fix Windows Updates with Fix WU Utility | The Windows Club
3.Try suggestions from this site:You cannot install some updates or programs

Read other 4 answers