Over 1 million tech questions and answers.

can Wireless lan and ethernet Lan co exist?

Q: can Wireless lan and ethernet Lan co exist?

i have a computer that is connected to a domain.
i want to connect it with an usb wireless adapter.
the problem his that if i use the adapter i can't acess the domain because it's two different networks.

i'm working on windows 7 ultimate 32 bit
is there a way to work with both networks connected?

my computer is HP DX2300

and this is the specs:
GE115EA HP dx2300 MT PD-925 2x3.0GHz 2x2MB HT,1GB DDR2,160GB,DVD+/-RW,FastEth,WinVistaBusiness32

thanks!

RELEVANCY SCORE 200
Preferred Solution: can Wireless lan and ethernet Lan co exist?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: can Wireless lan and ethernet Lan co exist?

I dont think it'll work but if anything, make sure your IP address on each network is different.

Read other 9 answers
RELEVANCY SCORE 54.8

Ok, I have a problem that is going to cause me to go insane... Ok my friend apparently formatted his laptop with the wrong disc and now several things aren't working due to the wrong drivers being installed. Its a Toshiba Satellite L305D-S5900, I have already been to their main site and looked at all the drivers they have posted for it. There is no Ethernet Controller!!! Thus meaning I cannot connect to the internet, otherwise I would just use a program to find all the drivers for me and that be that. I ran a scan with a program that I found that does not require a net connection to work and it showed that the driver is Realtek GBE_FE Ethernet PCI Nic. The computer runs XP, so I found the drivers relatively easy and then installed them... and they were not the ones for it because its still saying the Ethernet is not installed on the Device Manager. I used Driver Genius to find out what the driver was, Driver Detective requires a net connection to work... so lame... I've been sitting here for about 2 hours and its driving me crazy. Please if anyone can help me here I would be MOST appreciative. Thanks
 

A:Ethernet Controller Drivers Dont Exist

Read other 9 answers
RELEVANCY SCORE 48.8

there are many peices of hardware out there that allow you to transmit video from one TV to another wirelessly (or from a computer) but ive searched the internet over and cannot find a similar device that will allow you to input a signal from a dvi cable then transmit it wirelessly and output with a dvi cable.. basically to transmit High definition... im looking to do this from my computer to my tv. right now im just using S-video so i cant get the higher resolutions on my screen
 

A:wireless dvi transmitter? do they exist?

I have never tried to search for a wireless dvi nor will I ( althoug i have contemplated the idea) for this reason; I am 98 percent sure they do not exhist, at least not a dvi to wireless dvi by itself. Cause Hi DEF is HUGE . But there are certain devices that kinda work like that . BUT u need a fast wireless network. One item that will soon come out and is 99 percent probable easy to use and setup is the new Apple's ITv thing that is coming out soon . From what i have heard apparantly it will work with Windows and MAc, but must use Itunes. It will support all resolutions up to 1080i. I am not sure if they will have dvi , but the signal will absolutely be digital( i think and hope) and will be wireless, most importantly it will be HD! This is basically a box u put near the tv , to which your computer send the image signal . Many people are excited about it and it should definetely be something to look into. Most brobably this new APPLE ITV will have a controll remote. If using itunes isnt a good idea for u, u should consider that with the ITV ( thats what many call it, ) and itunes , It will basically do anything that itunes is capable of doing.
 

Read other 8 answers
RELEVANCY SCORE 48.4

Once again I find myself having to purchase a wireless PCI adapter for my PC. For some reason, I seem to be having to replace these things more than any other single component in my computers and I am tired of them living such short lives. I have used Belkin and Linksys exclusively to this point, the last being the Linksys WMP54G.

I am beginning to wonder if the familiarity of their name doesn't suggest quality of their product. I am not hard on my computers and I treat them well as far as cooling, not overloading and when handling them.

So, now I am looking at alternative brands as there are many but don't want to go from the frying pan to the fire. Some of the brands on newegg.com that look decent are Rosewill and TP-Link along with Asus. I am familiar with Asus but not with the others. I am on a tight budget so cost is a big consideration. Any suggestions as to which brands are most likely to sell me a durable product or which component might be best to consider?

Thanks
 

A:Do reliable PCI wireless adaptors exist?

Read other 7 answers
RELEVANCY SCORE 48.4

Hi Everyone, New to the forum and having a lot of issues with my Ralink USB adapter. I have a black icon that says "Ralink does not exist" in my taskbar. I have uninstalled and reinstalled the driver already with no luck. Also tried removing the adapter and plugging it back in, all with no luck. I see it present in my device manager with a yellow exclamation mark on it. It has previously been running fine with no issues. I am running a Dell tower with XP on it and the latest SP.

Anyone have any ideas?
 

A:Ralink Wireless Card Does Not Exist? Help Please

Read other 9 answers
RELEVANCY SCORE 48.4

I have an ethernet router, and I will soon be purchasing a laptop with wireless capability. My question is, is there such a thing that I can plug into one of my routers ethernet ports, that will act as a wireless connection between the router and my laptop?

It's really hard to explain, but I hope you know what I mean. Wireless routers are way too expencive for me lol, so I'd need something like this if it exists, and I seem to remember hearing they did....
 

A:Wireless thing for my router, does it exist?

Read other 7 answers
RELEVANCY SCORE 48.4

Hi there,

I have a Rosewill RNX-G300EX/LX installed on my PC (it's an Acer, that's all I really know, and I'm running Windows7). I've had it for 9 months and never had a problem.

About an hour ago, I was browsing the internet when it suddenly disconnected. I thought it was my modem since I have a pretty shoddy service, but it isn't. I am still using it on my phone and it is working just fine.

The Windows network and sharing center is telling me that no connections are available, so I clicked on troubleshoot. I skipped where it told me to plug in an Ethernet cable, since I use a wireless adapter, and it told me that my wireless card is disconnected.

I thought maybe if I reinstalled it, it would fix it. So I uninstalled and reinstalled using the disc.

Now the Ralink icon on the desktop is black and when I hover over it it says "Ralink Wireless LAN Card Not exist"

What does this mean, and how do I fix it? Thank you.
 

A:ralink wireless lan card not exist??

And it doesn't show up in Device Manager, not even as an "other device," right?

It may mean that the wireless card has died or maybe there is a problem with the slot (it's a PCI card, right?). Uninstall the driver and then physically remove and reinsert the card. If that doesn't help try it in a different slot if you have another spare or can switch it with another device.
 

Read other 3 answers
RELEVANCY SCORE 48.4

Hi all,

After a recent reinstall of XP on an old system, I have been experiencing a few problems getting the wifi to work. Im using a generic wifi usb adapter as the system does not have an onboard wireless card. I can only detect (and use) the wireless network coming from my phone which is a portable hotspot and one other wireless network. I know that there are many wireless networks that should be visible but are not being displayed for some reason. Any advice would be fab. Cheers.

The specs of the PC are:
OS Version: Microsoft Windows XP Professional, Service Pack 2, 32 bit
Processor: AMD Sempron(TM) 2200+, x86 Family 6 Model 8 Stepping 1
Processor Count: 1
RAM: 767 Mb
Graphics Card: NVIDIA GeForce 6600 GT, 256 Mb
Hard Drives: C: Total - 78152 MB, Free - 70822 MB; E: Total - 953867 MB, Free - 344492 MB;
Motherboard: ASUSTeK Computer INC., A7V600-X
Antivirus: None
 

A:Wireless networks exist but not visible.

Wireless routers can be configured to not broadcast their SSID (ie their network name) which means other wireless-enabled devices within range cannot "see" them.
 

Read other 2 answers
RELEVANCY SCORE 48

Hi, I'v recently wiped my laptop as it decided not to work for me and have installed windows service pack 3.
My laptop is an E-SYSTEM EI 3101, I'v been on the manufacturers page and it came up with a list of drivers to download for my laptop. One of these was Intel pro wireless but that didn't seem to work, and I know Ralink works as this isn't the first time I'v wiped my laptop.
If anyone could shed some light on my situation it would be extremely appreciated

Thanks
Laura.
 

Read other answers
RELEVANCY SCORE 47.2

Hi all! I would really appreciate if anyone could help me with my problem. I have been trawling the net for hours to try to find a solution but as I am pretty much (well, competely) clueless about anything techy, I haven't been able to find a solution!

I have a Dell Dimension 3100 (only has VGA output)
I have a DVD player (SCART only)
I have a set-top virgin media box (RF and SCART)

I have bought a Clearco HD9000 projector (has VGA, S-video, RF and AV input)

I want to send the image and sound wirelessly.

Is there a wireless sender out there that is compatible with all of that? I have had trouble finding any that takes VGA (something about it being too dense?).

I have looked at a VGA to S-video adaptor (only a few quid!) which would allow me to connect it to a wireless transmitter, but does my computer need a TV-out to work with this? I don't even know if it has such a thing!

Alternatively would something like a VGA to TV signal convertor (around 30 quid) work?

I would be huuuugely grateful if anyone could help me out on this, and yes, I am embarassed about being so unbelievably clueless!

Thanks so much
 

A:Wireless sender with VGA and SCART inputs: does such a thing exist?

Need more Info . . .

I am not sure what you are trying to do.

You want to wirelessly transmit video. Do you mean transmit your RGB computer video to your RGB projector port?

I bought a new device that transmits HD RGB signals wirelessly to another RGB input so that you can take your laptop and transmit HD video to a remote big screen (55") monitor. We use it for presentations. The device is new as of Nov. 2008 but is based on the new US frequency FCC allocation for high bandwidth video.

Not sure if it would work in your county.

It's called "Wireless USB to VGA Adapter Kit". Techspot won't let me post the URL because they consider me a "newbe".

So, check it out at Cablestogo. You know the drill . . . www and dot com.

I am sure they could tell you if it would work for you.

Good Luck,

Art
 

Read other 1 answers
RELEVANCY SCORE 47.2

Are you guys aware of a single pci card that offers the typical ethernet connection as well as a wireless one? I'd like to have the option to connect to either and I don't want to get two seperate cards. Any info is appreciated, Thanks
 

A:10/100 Ethernet/Wireless Ethernet PCI combo

I don't think you can do that but I would go wireless. :bounce:
 

Read other 1 answers
RELEVANCY SCORE 46.8

I'm running Vista Home Premium 64-bit on a Gateway M-6864FX laptop, and I'm unable to get internet via wireless or ethernet. It said it was there was a problem with my IP configuration, but upon checking the properties of my wireless adapter, where normally ipv4 and ipv6 are located in the list, there was nothing. It wasn't present in my wired adapter's list either. I clicked the install button and was able to install ipv6 back without incident, but when I try to install ipv4, it says "Could not add the requested feature. The error is: Access is denied." The image attached is the area I'm referring to where ipv4 is missing from. I've tried using netsh.exe to reset my IP "stuff" and winsock, but after restarting, nothing is different. I've uninstalled and reinstalled my driver for both my wireless and wired adapters. I've scoured the web and found a very small few articles of people with the same problem, but none of them have found a solution. Can anyone here think of anything else that I might try? Thanks in advance for any help I receive. I can provide any additional information that might help you to diagnose my problem.

A:Can't connect to Wired or Wireless internet because IPv4 doesn't exist

Go Start>Run ("Start Search" in Vista/7), type in:sfc /scannowClick OK (hold CTRL, and SHIFT, hit Enter in Vista/7).Have Windows CD/DVD handy (with Vista/7, most likely, you won't need it). If System File Checker (sfc) will find any errors, it may ask you for the CD/DVD (rarely in Vista/7 case).

Read other 1 answers
RELEVANCY SCORE 46.4

Hi, I currently connect to the internet through a wired ethernet port in the wall which connects to my university's network.

I want to make this wireless since I bought a new macbook and was wondering if this product would do it? http://www.amazon.co.uk/dp/B006PYGWG6

I don't know much about it but I was concerned because the Router Mode says 'cable connection only' and I'm not sure the connection is cable (is it ADSL?). Will I need anything else like a modem?

Any advice?
 

A:Making an ethernet university connection wireless with TP-LINK Wireless Travel Router

Read other 6 answers
RELEVANCY SCORE 46.4

Hello! I've been trying to search this problem up at google but I can't seem to find anyone in my situation. Anyways my account have been deleted from the login screen, basicly. I was in the SYSTEM ACCOUNT to see if I could change some settings in my computer.
After I logged off, and tried to login to my normal account again. It was not there. Only the Administrator account to which I used to get into the SYSTEM ACCOUNT. Now, my user does exist. Because when I go into users in my documents
It is there, and the one im trying to get into is called "natalask". I've been trying to go and see if the account is disabled, but there is just 2 accounts that exists there where I  can choose to disable and enable accounts. Administrator
and test, I created test after this I couldn't get into natalask by the way. Does anyone know my problem? How do I solve this?

Read other answers
RELEVANCY SCORE 41.6

I've just moved into my Halls at uni in London. We have to use a CAT 5E ethernet cable to connect to a socket in the wall. When we open a web browser we have to enter a username and password to be able to go online. I was wondering if there is any bit of Hardware which i could plug into the ethernet wall socket which would then broadcast that ethernet connection as wireless and if so if it is possible to protect the connection so others cant use the WIFI.

thanks
 

A:Ethernet to Wireless, is this possible?

When we open a web browser we have to enter a username and password to be able to go online.Click to expand...

That probably means that they want to restrict usage to one computer per connection and do not want wireless networks set up. So, please check with the IT department before doing anything, as it's not very hard for them to detect violations.

On the assumption that you will not attempt this unless it falls within the rules, you can use a Wireless Access Point (WAP). Use encryption, preferably WPA2-PSK, AES, but at least WPA-PSK, TKIP. Use a passphrase that cannot be guessed and does not include dictionary words.
 

Read other 1 answers
RELEVANCY SCORE 41.6

Hi everyone

I dont really know whether this is really relevent, but I was just wondering. If I have both ethernet cable and wireless on one computer as 2 networks. Can I join up both of them to increase my internet speed or somthing. I tested both of them seperately and the ethernet cable was much faster than the wireless. My router is next to my computer. Can I have some tips. I will be putting some screenshots later.

Thanks in advance

A:What can you do with both ethernet and wireless??

  
Quote: Originally Posted by mw2


I tested both of them seperately and the ethernet cable was much faster than the wireless.


Surprise, surprise...

Read other 9 answers
RELEVANCY SCORE 41.6

Hi

My W8 PC is connected to the Wireless Router by Ethernet Cable, the PC also
has Wireless connectivity; is it possible to connect to the Router with both at t
he same time and if I do will that improve internet speed?

Thanks

Daniel

A:Ethernet and Wireless

Your internet speed is determined by your provider and the package you have, it is irrelevant how fast your connection to router is as long as it is at least a little faster than speed to the provider. So you can not change the internet speed above what provider gives you.

Read other 2 answers
RELEVANCY SCORE 41.6

Hi there,
I'm having troubles with our new router. I can connect via ethernet but not through wireless. I'm certain it's an issue with my laptop, as I've managed to connect several other devices without any problems. Any help would be appreciated as I've tried everything I can think of.

Below is the result of "ipconfig /all" with the ethernet cable connected.

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\WYN>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : WYN-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : dlink.com

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : dlink.com
Description . . . . . . . . . . . : Atheros AR5007EG Wireless Network Adapter

Physical Address. . . . . . . . . : 00-21-63-CD-F0-BD
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d91f:81b7:31ff:4ac1%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 01 August 2012 10:36:26
Lease Expires . . . . . . . . . . : 02 August 2012 10:42:13
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . :... Read more

A:Ethernet Yes, Wireless No?

------------------------------------------------------------------------
Atheros Wireless Adapter - AR5007EG & AR5007
Over the last couple of years we have been seeing a lot of problems with the above adapters, mainly concerning WPA and WPA2 encryption and mainly on windows Vista.
We have seen just a couple of issues on other windows operating system, windows XP and windows 7.

Windows XP:- A driver update has resolved the issue
Windows 7 :- No conclusive results for a fix

The wireless adapter gets an IP configuration, and shows as connected, but communication is non-existent or sporadic.

Log into the Router and disable the wireless security and see if you are now able to connect to the internet and surf OK.
Please post back a reply here, and let us know if that works or does not work.
If you post back the make and exact model of the router - we can advise how to disable the wireless security

Here are a number of possible solutions

--- 1) In Device Manager right click on the wireless adapter and "update driver."

--- 2) Download and install the latest wireless driver from your laptop manufacturer's web site support section,

If you post a reply here with the Make and EXACT model of your PC, along with the windows version you are running. we will see if we can find a link to the driver and will post a reply with the link here.

--- 3) On one occasion re-setting the router back to factory default and re-configuring the router settings has resolved t... Read more

Read other 3 answers
RELEVANCY SCORE 41.6

Here's something that is causing massive loss of hair.....

My PC is connected to my router with a wireless card. I also connect my PS2 to my PC using an ethernet connection (the ps2 is "modified" and I use this connection to play music and video thru the ps2 to the TV).

Everything works fine with one exception. It seems like the wireless is not getting a DNS. To obtain one, I have to disable the ethernet card, connect to my AP, then enable the card. If I lose my connect with the AP (which happens sometimes, it's on the other side of the house and the signal is a little weak), then when it reconnects I have to do the whole disable/enable thing.

It's not a huge deal, but I do like my stuff to work properly and usually things like this are not problem for me, but this one really has me wondering. Anyone have any ideas?

Here's my ipconfig /all if that helps. What's odd is the ipconfig is *exactly* the same when I can connect and when I can't. So maybe it's not a DNS issue, but something else. But I am unable to connect to any web sites until I disable and re-enable the ethernet card.

Windows IP Configuration

Host Name . . . . . . . . . . . . : HAL
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : domain.actdsltmp

Ethernet adapter Wireless Network Connection 3:

Connection-specific DNS Su... Read more

A:Ethernet and wireless on same PC

Read other 6 answers
RELEVANCY SCORE 41.6

This is, perhaps, an extremely silly question, easy to answer as the Techguy says! I have been using a desktop with Ethernet LAN (Landline) for years. Now, I have a Dell Studio 15 Laptop with Wireless output signal. My question is, How do I connect the two, so that I can use the Laptop too through my land-line broadband connection? Do I use just a wireless router in between? Any type of Wireless Router, or, any specific type? Do I need to change anything in my desktop LAN setup?
 

A:Wireless to Ethernet LAN

Read other 6 answers
RELEVANCY SCORE 41.6

I'm having problems connecting my PC via ethernet cord to the internet. We just got cable today and one of our PCs has a wireless card, when the other one doesn't. My computer is the basic one with the specs in my profile. It only has a dialup modem. I don't know if I have to configure something to the router or modem, but when my computer is hooked up to the router(the internet still doesn't work then) all other computers on the network won't connect to the internet.

Any help will be appreciated!
 

A:Pc not getting wireless through ethernet

Read other 16 answers
RELEVANCY SCORE 41.6

I have a Linksys BEFW11S4 4 port wireless broadband router with 2 x wireless laptops that can see each other and share files fine. I also have a PC which is hardwired to the router. All 3 machines have an IP address from the range I configured and all 3 machines can access the internet. The problem I'm having is that my hardwired PC cannot see the workgroup I have set up so therefore it can't see the 2 wireless laptops. The 2 wireless laptops can see the hardwired PC but cannot connect to it to view the shared folders.

I have switched all firewalls off, changed lots of config in the router, reset it to default, rebuilt my hardwired PC, pulled out some hair, changed network settings all over the place but just cannot get the hardwired PC to see the workgroup.

Any suggestions anyone ! !
 

A:! ! ! ! ! Ethernet Can't See Wireless ! ! ! ! !

Well, as long as all three are getting DHCP addresses from the same network, then the router isn't to blame, so, get it configured and leave it alone.

You say you've setup a workgroup for the laptops. That desktop machine also needs to be a part of that same workgroup. Then, you need to have the same username and password combination on the three machines, and then the desktop should be able to share files with the laptops.

And you definitely want the firewalls disabled until you get things working.

-Scott
 

Read other 1 answers
RELEVANCY SCORE 41.6

A little confusion here - When I log onto my Verizon router page (that 198.xxx thing), I show many menus but the following 2 have me a little confused. One says "network connection" type is: Ethernet - I do have a yellow cable coming out of my Actiontec router to the pc so I get that. Another menu says "wireless settings" and this says "wireless" which I have set to WPA and the mode is 802.11g "only". Is this system wireless or ethernet or both? I would like to do the pc to tv connection for netflix movies at some point.. Am I all set with this configuration? (knowing I have to buy a box of some sort, Roku or Apple or something) and if I do have a wireless connection, can I connect the two without cables running from one to another? Hope that is all clear. Thanks in advance.
 

A:Ethernet or wireless?

Is this system wireless or ethernet or bothClick to expand...

both

you have a wireless router - and so you can connect to the router with a cable as you currenty are doing and other devices PCs etc or your PC can also connect with wireless
I would like to do the pc to tv connection for netflix movies at some point..Click to expand...

someone else will need to answer the netflix service

from what I can see on the website
http://www.netflix.com/HowItWorks#faq1
you can watch via a PC


http://www.netflix.com/HowItWorks#faq1
Can I also watch instantly on my PC or Mac?

Yes. Simply press Play on any TV episode or movie to instantly watch it online on your Internet-connected PC or Mac.Click to expand...

so you can watch directly on your PC without any other device - and then if you have your PC video output connected to the TV you should be able to watch on TV via PC

whats the make and model of TV
- what outputs do you have on the PC video card ?
- what inputs do you have on the TV

if you have HDMI on both - then you should be able to use that - although for some copyright materials you will only be able to display on the TV and not two monitors
 

Read other 3 answers
RELEVANCY SCORE 41.6

So my wireless works well and fine, but the only problem is is that it disconnects time from time and i'm trying to download a 15 gb file that has no resuming capabilities. I want to use my ethernet connection rather than my wireless, but the ethernet (local area connection) isn't showing when I go to Control Panel/Network and Sharing Center/Manage Network Connections. I only see Wireless Network Connection. I have a router and a modem. the router is a linksys cisco. And my cable modem is linksys wrt45 or something. How can I fix this? My other two computers are using the ethernet cables fine.

A:Wireless but no ethernet

Download and run VistaForums SysInfo Tool (Select All and export to a file) on the laptop you're having trouble with, and upload it.

Ed

Read other 4 answers
RELEVANCY SCORE 41.6

Hi, I have a Pavillion dv7-1129 wm laptop. With Windows Vista Home Premium ... Amd Turion (tm) X2 dual-core moble Rm-72 2.10 GHZ...Ram-2814... 32-bit Operating sytem
Can anyone provide me with the drivers for the Wireless and Ethernet connections

Drives for a Realtek RTL8101 Family-PCI -E Fast Ethernet NIC (NDIS 6.0)

Thankyou
 

A:Ethernet and wireless

Read other 12 answers
RELEVANCY SCORE 41.6

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8103 Mb
Graphics Card: Intel(R) HD Graphics, -1988 Mb
Hard Drives: C: 465 GB (273 GB Free); E: 5 GB (0 GB Free); F: 143 GB (0 GB Free);
Motherboard: MSI, H67MA-E35 (MS-7680)
Antivirus: Avira Antivirus

I used to access my home wireless with a Netgear N150 Wireless USB adapter. The device still works, because I use it for Roku, but my computer can't access the wireless network with it. As a replacement I installed a TP-Link 300Mbps Wireless N PCI adapter (TL-WN851ND). That hasn't worked from the start. During the course of trying to fix the problem, I changed at least 10 different settings, and none of them worked. Now, I've lost track of all the changes I made. What I want is to erase all of the previous settings and connections and act like my computer is fresh out of the box and has never been connected to the internet before. The TP-Link is what I want to use. Not knowing as much as everyone else on here about computers, I am assuming that the Netgear and TP-Link aren't the problems, and it is instead something with my computer. Is there some type of checklist I can go though step by step to see exactly what the problem is? I don't know if there is physically something wrong with my computer that I can fix by buying a... Read more

Read other answers
RELEVANCY SCORE 41.6

should I enable the wireless when I want to use the ethernet, my wireless works fine, but when I try to connect with ethernet, either no connection or connection drops after a short time, It is a dell desktop with windows xp,with netgear switch, and comcast modem,with mac airport, I need to get my ethernet high speed working that I pay for. PLEASE someone help
 

A:ethernet and wireless together

If I am going to use ethernet for an extended time I remove an external wireless adapter or switch an integrated wireless off. But that's to extend the life of the unused component and to save the battery if on battery. If you are using a PCI wireless card with the desktop then disabling it is probably the best you can do. But that is not going to impact your ethernet usage, so it is really your choice.

Please show the following for when you have an ethernet connection and for when it has dropped ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 3 answers
RELEVANCY SCORE 41.6

So I just bought myself a new laptop (hp dv6910us) and I'm enjoying it thoroughly but I have a very basic question about what to use in terms of internet. In my apartment, I can easily connect to the internet through my ethernet connection or through the wireless. Both are smooth, fast connections. In terms of increasing the lifespan and battery-life of the computer, should I stick primarily to connecting through the ethernet or through my wireless connection? I have an Atheros AR5007 802.11 b/g WiFi adaptor and my processor is an AMD Turion X-2 TL-60 2Ghz with 3.00GB RAM. Running windows vista 32 Bit. It's a general question, not a pressing issue so answer at your leisure. Thanks.
 

A:Wireless vs. Ethernet

Not sure if anyone has ever bench marked something like that. But my gut feeling is that the wireless would draw a little bit more power but I have no evidence to back that up.
 

Read other 3 answers
RELEVANCY SCORE 41.6

Hello,

I have a PC with wireless connection to the Internet (PCI wireless card). Is it somehow possible to use the Ethernet port (NIC) to PROVIDE network access to a device? (such as a D-Link internet camera with ethernet connection).

Thanks for your help!

Johnathon
 

A:One wireless, one Ethernet, can I use both?

Read other 11 answers
RELEVANCY SCORE 41.6

Is there such a thing as a 5 Ghz Ethernet card, or is just 5 Ghz wireless?

A:Ethernet vs. wireless

No - 2.4/5 GHZ refer to the wireless frequency.

Ethernet comes in two speeds mostly - older 100 Mb/s (100 megabits) or more modern 1000 Mb/s (1 Gigabit). Of course, these are usually much faster than internet speeds even for slower 100 Mb/s unless you have amazingly fast broadband.

Read other 1 answers
RELEVANCY SCORE 41.6

hi, i am using a wireless connection but to play bf2142 well i need a wired connection. i have got an ethernet wire going from the wireless router to computer, and it works [i disable the wireless connection and i connect to the web through the wire]. but i want to use my ethernet wire as my PRIMARY way to connect to the internet, but still want the wireless connection active for my computers upstairs to connect to the web.

does this make sense?

is this possible?

thank you

denny
 

A:using ethernet instead of wireless???

Read other 15 answers
RELEVANCY SCORE 41.6

Hey all im new here, and this is my first post.
First of all I have a DSL connection through my provider. I then have a NetGear FM114P wireless firewall/print server (router ) attached to the modem.

My computer is currently hardwired through the ethernet port in the FM114P router with two other computers connecting by WiFi.

What i was thinking, was loosing the ethernet cord and turning this computer in to a wireless connection like the other two, but if i do will i loose speed? This computer currently gets between 700-950 kbps., depending on traffic.

thanks
mausie
AKA foufymaus
 

A:Ethernet -vs- Wireless

Read other 9 answers
RELEVANCY SCORE 41.2

Hi guys,

In my office we have a windows server, 10 pc's and 3 printers. All devices are interconnected through a wired network. We have some business applications installed on the server and set up them to launch from client computers. As we are going to move to a new office space we have an intention to say goodbye to the wired network and make everything wireless. My question is will we be able to launch the programs which have being installed on server from client computers via wifi?

Thank you.
 

A:Transform Ethernet LAN in to a wireless LAN

Read other 8 answers
RELEVANCY SCORE 41.2

Hi.
im currently in rented accomodation and the internet is via a wired ethernet cable. i am not admin on the network. but im interested in a quick way to make a small wireless network using the ethernet so i can use wi-fi in my room.

looking for a cheap, simple option.
i have a bt voyager router available to me if that helps?
but i assume there's a small device you can buy that will transmit a short range wireless signal and work as the exchange between me and the network.

thanks!
 

A:Ethernet to Wireless - non admin

Read other 11 answers
RELEVANCY SCORE 41.2

Just built a computer and trying to get a wireless card that will work with Windows x64. Any hints, tips or advice? I have purchased 2 and they did not work with x64. Please help!
 

Read other answers
RELEVANCY SCORE 41.2

I have an Acer Aspire 7552G laptop running Windows 7 x64 that is having problems with connecting to the internet.

I started to notice the wireless and LAN connections becoming very weak, web pages would load slower, data would take longer to download, etc. This lasted for a couple weeks. As of now, I cannot get any signal, neither wireless nor LAN.

I normally use Google Chrome but have tried to connect through multiple browsers.

I have tried updating the wireless/ethernet drivers, and I have also tried uninstalling them all together and reinstalling them. Both to no avail. I have no idea how to resolve this issue and am hoping the tech pros here can help me out!

Wireless LAN and LAN vendors are both Broadcom and the drivers can be found here: Acer Support: Downloads & Support Documents - Notebook / Aspire / Aspire 7552G


*I am connecting to internet on a university campus.

A:Wireless & Ethernet LAN - Not Working?

How are you measureing the stregth of the ethernet connection?

Who is your ISP ?. . What Brand and Model is the Modem and Router?


Lets take a peek at your network environment:

First:

Power Cycle everything . . Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet.

Then:

Remove all the stored wireless network profiles and search for the network again.

How to Remove Stored Wireless Network Profiles for XP, Vista, and Windows 7

Then: check your browser's settings, remove any proxy settings if found here's how.

Then:

with the pc connected to the router, Click on Start . . Run . . type CMD

At the > prompt type type the following command: IPCONFIG /ALL


Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

Right click in the command window and choose Select All, then hit Enter. Come back here and Paste the results in a message.

If you are on a machine with no network connection, use a floppy, USB drive, or a CD-R disk to transfer a text file with the information to allow pasting it here.

then please Download and run this Xirrus Wi-Fi Inspector, click the Networks link on the upper left and paste a screen shot of that screen here. Note that this application requires NET Framework to run. If you get an error abo... Read more

Read other 16 answers
RELEVANCY SCORE 41.2

I network an XP box and a 98 box via wired Ethernet. Currently, a DSL connection is shared via a Zoom modem with a built-in router (5651_X4_2_2) connected to a Linksys switch (EtherFast 10/100 5-Port Workgroup Switch EZXS55W).

Just bought a laptop with a wireless card installed and want to share Internet connection and files wirelessly as already done via wired Ethenet (between XP box and a 98 box). Laptop features VISTA Home Premium.

Instead of connecting the Laptop to the switch via a patch cable (to share DSL and files), thought maybe there's a type of Ethernet to wireless adapter product that simply plugs into a port on the switch that would in turn transfer a wireless signal to the laptop. Or not?

Thanks in advance.
 

A:Ethernet to wireless adapter

Read other 8 answers
RELEVANCY SCORE 41.2

Hello I have been having a problem with my ethernet work but wireless not. It basically says acquiring IP address then says limited connectivity. Im using a Dell Vostro 1520 laptop and a dlink router. Thanks for your help.
 

A:Ethernet works but wireless does not

Check.
You have no conflicting wireless managers installed try using only the Windows built in tool
Remove any unneeded wireless networks from your system.
Remove and re add your network back in, ensure all settings are configured correctly. Connect firstly with the cable and note down everything exactly. i.e. SSID, Security type, encryption type, security key.
If it still dosent work look into updating or rolling back the drivers for your wireless card.
 

Read other 1 answers
RELEVANCY SCORE 41.2

Hi all
Im not compleatly computer illeterate but basically if something goes wrong im buggered!

latest problem is that I was connect to orange broadband (live box) with numerous problems, the main one being that i could only connect using ethernet(?) after numerous phone calls they sent me to 192.168.1.1 or something to that effect and had me change a few things around and hey presto it worked.

problem is I then moved and am now trying to connect to my very unhelpful flatmates O2 wireless box ii. and am back to only being able to use a cable to connect. I tried the previous address that orange gave me but im guessing it only works for them as it wont even display the page now.

i'm pretty sure the problem isnt the O2 box as my flatmate and friends have no problems connecting and i cannot connect to any wireless networks (macdonalds WiFi included lol)

so where do i go from here?
 

A:Solved: can use ethernet but not wireless!

Read other 11 answers
RELEVANCY SCORE 41.2

Im sure this is something really simple but basically with my laptop i can connect to my router wirelessly fine but when connected via an ethernet cable web pages dont load although everything states its connected???
When you attempt to load a page the load bar starts to work in the bottom right hand corner to indicate its loading but doesnt go any further than halfway and never loads?
My security programme is ESET and have attempted disabling the personal firewall in the hope this may help but no joy.
Have tried another laptop connected up via ethernet cable and that laptop worked fine loading pages problem free??
To me this seems odd but could be relatively simple as it states connection, can be prooved to work fine on another laptop so it must be something on my laptop stopping it going any further??
Could anyone please lend some much needed advice pls? would be much appraciated
thanks
Paul
 

A:Can connect wireless but not via ethernet ?

Try these simple tests using the wired connection only with the wireless disconnected.
Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

In the command prompt window that opens, type type the following commands one at a time, followed by the Enter key:

NOTE: For the items below in red surrounded with < >, see comments below for the actual information content, they are value substitutions from the previous IPCONFIG command output! Do NOT type <computer_IP_address> into the command, that won't work. Also, the < and > in the text is to identify the parameters, they are also NOT used in the actual commands.

Do NOT include the <> either, they're just to identify the values for substitution.

IPCONFIG /ALL

PING <computer_IP_address>

PING <default_gateway_address>

PING <dns_servers>

PING 74.125.45.100

PING yahoo.com

Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

<computer_IP_address> - The IP Address of your computer, obtained from the IPCONFIG command above. (For Vista/Win7, the IPv4 Address)

<default_gateway_address> - The IP address of the Default Gateway, obtained from the IPCONFIG command above.

<dns_servers> - The IP address of the first (or only) address for DNS Servers, obtained from the IPCONFIG command above.

If you are on a machine with no netw... Read more

Read other 1 answers
RELEVANCY SCORE 41.2

Hello all-

I am at my family's vacation home. For several years we have stuck to using dial-up here, part of the whole isolation thing you know, but recently decided to upgrade to the most basic DSL. I set up the connection and connected the modem (Lynx L-220) to a wireless-b router (Linksys BEFW11S4) and everything was working great for about, oh, maybe an hour. It started getting unbearably slow, worse than dial-up. So I connected to the router with an ethernet cable and it's fine, most of the time. I then disconnected the ethernet and surfed wirelessly, and it was also fine. So the wireless only would work properly if I had just used the ethernet. ?????????? That's odd.......

I tried pinging a few sites on ethernet and wireless to see what happened. I opened Firefox, tried loading a page (of course it wouldn't) and then typed ping www.google.com in command prompt. It timed out a few times, then get a reply and, low and behold, the page suddenly started loading. Now I'm really confused. The internet works sometimes, the wireless works sometimes, and the ethernet works sometimes. ?????

I'm certainly planning to call tech support, but as that is a big thing to attempt, I thought I'd post here first and see if there is anyone out there who perhaps can help me.

OMG OMG OMG

Edit: I have tried pinging and loading pages only connected to the modem as well. It still doesn't work properly. I guess it's not the routers problem, maybe ... Read more

A:Wireless fast only after using ethernet...

Read other 16 answers
RELEVANCY SCORE 41.2

Hi guys ,I am facing the weirdest problem . when I m trying to connect my laptop using wifi , my modem get rebooted ..all light gets off (DSL,WLAN,Internet) automatically . is it any malware or what ? I have updated my BIOS , my wireless driver ..but nothing worked .nd when I m connecting using ethernet its working fine , modem working smoothly .
 

A:Wireless not working, but ethernet does

Hi Sssstud,

Please let us know the message you see when you try to establish a wireless connection to the internet. Is your computer able to detect wireless networks? What version of Windows are you using and what is the model and name of the wireless router?

Thanks and regards,
Babita G
#iworkforDell


For easy access to drivers, manuals and product updates, please visit our Support Site .
 

Read other 3 answers
RELEVANCY SCORE 41.2

Hi friends,
i use my laptop mainly with wireless network,
i wonder if there is a setting to disable wireless network auto. when Ethernet cable plugged in (and vice versa)?

*without 3rd party app's

Thanx

A:wireless & Ethernet conflict

What conflict are you having?

I run my laptop wirelessly most of the time as well but occasionally connect a Ethernet cable and everything works fine.

Read other 9 answers
RELEVANCY SCORE 41.2

hi...i have a macbook and a pc.....and i have subscribed in 2 internet isps. one of them is just wireless network and the other one is DSL ....i was wondering is it possible to use both of them in my mac at the same time and reffer some of applications to one and others to otherone?
 

A:use wireless & ethernet in mac in the same time

This thread, post #17 for Windows. Don't know if it would work for Mac.
http://forums.techguy.org/networking/849382-solved-how-do-i-specify-2.html
 

Read other 2 answers
RELEVANCY SCORE 41.2

I heard someone ask a question to a kid who knew a good amount about computers. The question was "If I have an empty ethernet port in my computer, could I configure my 360 to use my wireless internet?" The kid said yes, talked about some tool that is built in on XP and Vista. I missed the tool name, but instantly thought I would love to move my PS2 out of the basement, and into a room where it would actually get played.

So, the computer is connected to the internet through a simple USB wireless internet... stick. I was wondering if I plug my PS2 into the empty ethernet port in the back of my computer, how would I configure it to use the wireless network that is being picked up by the USB wireless card? I'm using Windows XP.

Thanks for the help.
 

A:Solved: PS2 to ethernet to wireless?

Read other 16 answers
RELEVANCY SCORE 41.2

i have had a bad relationship with at&t i'm getting really tired of it so i had the idea of getting verison, unforunetly they don't offer any service where i live, i saw an ad for verison broadband network, that comes with a netbook. i had the idea of getting that deal, and pay $30 a month rather than $100 for this crappy At&t connection. i though that i could could uplink/bridge the broadband and ethernet internet into our houses Ethernet/wireless router. i have been working on it with my computer, this is my set up. i have my wireless pc connected to the router. i have an ethernet port on the back, witch i have connected to another wireless wrouter, were a laptop then connects to that router, i know that sometimes the router won't uplink the signal, i have a fios router that has a WLAN connection aside from the Coaxe connection. both should allow incomming connections. so give me some guidence, i'll take anything. thanks for all your help, thank you.

Bwkrazyness

Read other answers