Over 1 million tech questions and answers.

Basic Audio help

Q: Basic Audio help

Hey! Basically, My default output for audio is realtek speakers. When I plug my headphones in the front of the PC, it doesnt give me a separate audio output, rather it plays my speakers through my headphones. I was wondering if there was a way to make it treat my headphones as separate speakers and then I could choose to have my skype play only through my headphones, while playing something else out of my speakers.

Thanks for the help.

RELEVANCY SCORE 200
Preferred Solution: Basic Audio help

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Basic Audio help

OP has been given an answer: Treating My Headphones As A Seperate Audio Output

This duplicate thread will now close.

Read other 1 answers
RELEVANCY SCORE 45.6

I have a few questions relating to converting mp3 to audio cd, as I have some mp3 recordings I need to add to audio cdr in order to play on any hi-fi :-
1. What would you recommend as good tools for the job in converting mp3 to audio cd, with a high quality conversion? A tool that can verify the burns afterwards would be the best for me (ashampoo does not let me do this). Are there any free tools that can give a high quality output for this task?

2. Other than mp3, whats the best tool in your opinion that can convert a variety of audio formats to audio cd, without having to take each track individually to a format that the conversion program only supports (which is supposedly usually wav or mp3)?

3. Do audio cds normally have a main title?

4. I tried out ashampoo, which for mp3 to audio cd conversion, did not let me write a main title header for the disc in general. My discs didnt read in the same laptop after a burn either, but they did in a hi-fi!-could this have been related to the audio cd not allowing me to give the cd a title, or is it more likely to just be a poor drive or burning program?

5. After adding mp3 files, for a split second a window once popped up in the above ashampoo program and asked me to give the disc a name, but disappeared when I tried to click on the text area. I thought initially that my firewall/protection may have been causing the window to disappear (comodo/adaware always running)-which sounds like a bad bug-has anyone come across this in a... Read more

A:basic mp3 to audio cd questions

Read other 9 answers
RELEVANCY SCORE 44

My sound on my computer is working fine, but when I put in a dvd the sound will not play. I can see the dvd just fine but no sound, I dont have anything muted and I can play other videos from the internet on media player and it will work.

Pleassse can anyone help me here???

A:Audio Problems with Windows Media Player (Vista Basic)

It might be the codec. Is it a burned DVD?

Read other 2 answers
RELEVANCY SCORE 43.2

Imagine yourself on a computer, listening to music. You are almost done with a song until it just stops in 20 seconds before it's done playing. Think you've had this problem well, don't think so because I have. Here's some advice for you:

1. Update your Realtek HD Audio Manager
2. Check your Device Manager
3. Do a "Disk Defragment"
4. Have a clean-up for your hard drive
5. Sometimes overheating may cause bad audio quality

This is all I can say right now. I hope you enjoy this...

Read other answers
RELEVANCY SCORE 43.2

Hi expert, when I installed Jet Audio Basic Player suddenly the .dat file extension format icon changed like a media player kind of song that if you open it will play. But ofcourse it will not play because it is .dat file extension only. How I will restore this to original file format?

A:Help Jet Audio Basic Player changed the icon of .dat file extension format

Uninstall Jet Audio and reinstall to see if that solves the issue.

Read other 6 answers
RELEVANCY SCORE 43.2

Hi i have a hp pavillioin dv 6000 with a model number of dv 6605us and am with a vista home basic operating system and am having problems with the audio when i play music it plays but no sound is outputed but now i have an error message saying no audio output devices have been installed i have tried all possible solutions like re installing the audio drivers but none is working and i now cant even see sounds listed in the device manager please help me solve this am really frustrated thanks.

A:No audio output devices installed windows vista home basic

In device manager You've clicked VIEW/put a dot on Device By Type and you do not see Sound, Video and Game Controllers? And if you do see that and click its dropdown menu, there is no entry for Realtek High Definition Audio Controller? Where and how did you install the drivers then. Was realtek uninstalled by accident. Do you see anything in Control Panel as in Realtek HD Audio Manager??

Read other 11 answers
RELEVANCY SCORE 39.6

Windows 8 is the default and only OS on this laptop. Please do not suggest restore or backups - they do not exist.

I am trying to reinstall a fresh Windows 7 back into this laptop for dual boot purposes. I have a Win7 ISO all ready to go on a flash drive. The problem is... I cannot get the 20GB "Windows Seven (S " drive to convert from dynamic to basic. THere is no data to backup, Im tryiong to do a fresh install. Ive been trying for two weeks.

Why am I trying to do this? Because I just want to get a copy of Win7 back on here to fall back upon when Redmond pulls the auth key for Win8 Dev

This is the status of my drives. Theres one.. its 465GB System has 200MB and Win8 is on C with 465GB. THIS is a Dynamic Drive. I know C cannot be made basic. I know Windows wontr install on anything but Basic.

How do I either 1. Fix this so I can install Windows 7 onto a new partition of 20-25GB OR 2. create a new drive for this?

I know how to create and shrink and delete all that Ive tried all this Data Partition - Windows 7 Forums and its other tuts but I cant get around the Dynamic. I dont want to pay 30 bucks for a tool either -- there must be a way to do this and I put my hopes in the Windows community to bail me out (if you have android troubles, i may be able to help )

I want to keep Win 8 as default, I know my way around this machine its just this dynamic drive is troublesome.

I am cross posting this in Win7 forum as well, not sure which place is more appro... Read more

A:Trouble creating basic drive for Windows 7 reinstall Dynamic to Basic

Check out this post by Jaidyn and see if it'll help you:

http://www.eightforums.com/hardware-...html#post40357

Read other 6 answers
RELEVANCY SCORE 39.6

Windows 8 is the default and only OS on this laptop. Please do not suggest restore or backups - they do not exist.

I am trying to reinstall a fresh Windows 7 back into this laptop for dual boot purposes. I have a Win7 ISO all ready to go on a flash drive. The problem is... I cannot get the 20GB "Windows Seven (S " drive to convert from dynamic to basic. THere is no data to backup, Im tryiong to do a fresh install. Ive been trying for two weeks.

Why am I trying to do this? Because I just want to get a copy of Win7 back on here to fall back upon when Redmond pulls the auth key for Win8 Dev

This is the status of my drives. Theres one.. its 465GB System has 200MB and Win8 is on C with 465GB. THIS is a Dynamic Drive. I know C cannot be made basic. I know Windows wontr install on anything but Basic.

How do I either 1. Fix this so I can install Windows 7 onto a new partition of 20-25GB OR 2. create a new drive for this?

I know how to create and shrink and delete all that Ive tried all this Data Partition - Windows 7 Forums and its other tuts but I cant get around the Dynamic. I dont want to pay 30 bucks for a tool either -- there must be a way to do this and I put my hopes in the Windows community to bail me out (if you have android troubles, i may be able to help )

I want to keep Win 8 as default, I know my way around this machine its just this dynamic drive is troublesome.

I am cross posting this in Win8 forum as well, not sure which place is more a... Read more

A:Trouble creating basic drive for Windows 7 reinstall Dynamic to Basic

Use free Partition Wizard bootable CD version 4.2 which still has non-destructive Dynamic>Basic conversion as a free feature: pw422.zip ISO - Windows Live

Backup a WIn8 System image and your files, Boot CD, Rightclick on the HD to convert. Create/Resize your partitions as you wish.

Adapt these tips for getting a perfect Win7 reinstall: Reinstalling Windows 7

Win7 should configure a Dual Boot menu, if not use EasyBCD to add Win7 after install. Earlier versions of Easy are still free.

Read other 3 answers
RELEVANCY SCORE 36.8

Hi everyone,

I've been trying to get my feet wet in creating a .vbs file from notepad to do a basic function. I wanted to be able to run .reg files remotely but also interactively. This led me down the path of simply finding an example of a .vbs that would open anything remotely at all. Notepad is what came up with the most results and the Win32_ScheduledJob object appeared to be what was needed.

I researched many different places but this is a decent walkthrough. http://msdn.microsoft.com/en-us/library/windows/desktop/aa394601(v=vs.85).aspx

I grabbed the code below out of the website and changed the date parameters to run in a couple minutes from my current time. I could see the task in scheduled tasks but when the time had come and gone nothing would happen and this is just trying to get it to run locally so far.

strComputer = "."
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" _
& strComputer & "\root\cimv2")
JobID = "Test"
Set objNewJob = objWMIService.Get("Win32_ScheduledJob")
errJobCreate = objNewJob.Create _
("Notepad.exe", "********143000.000000-420", _
True , 1 OR 4 OR 16, ,True, JobId)
If errJobCreate = 0 Then
WScript.Echo "Job created successfully: " & VBNewLine _
& "Notepad.exe scheduled to run repeately at 14.30 (2:30 P.M.) PST" & VBNewLine _
& "on Mon, Wed, and Fri."
Else
WScript.... Read more

Read other answers
RELEVANCY SCORE 34

can u people just list a few basic commands for visual basic 6 cause i just bought it and would like to know a few basics thnx
 

A:basic visual basic help

There are too many variables and other things you need to know, you just don't throw out commands and thigs work. Get a good book on VB programming and use any of the help or online tutorials that come with VB. There also plenty of forums on the net that are specific to programming.
 

Read other 3 answers
RELEVANCY SCORE 34

help

i been trying to get my local home network. i used to have it working, but ever since i had to reinstall my OS on my computer, i havent been able to do it.

here is the computer specs:

Comp #1 (Packard Bell R515):
win95B
64 MB RAM
Linksys LNE100x FastEthernet NIC Card
200 Mhz MMX
Maxtor Ultra/ATA IDE Controller Card
disabled serial port

Comp #2 (Dell OptiPlex GX1p):
win98SE
320 RAM
500 Mhz
Integrated 3Com NIC Card

both network cards are installed correctly. in computer #1, i disabled the serial port as i am not using it and its causing IRQ conflicts with my sound card when i had my NIC card installed.

here is my setup on network properties on both computers:

Client For Microsoft Networks
Dial Up Adapter
NIC Card Adapter
TCP/IP for DialUp Adapter
TCP/IP for NIC Card
file and printer sharing for microsoft networks

Primary Network Logon: Client for Microsoft Networks

both boxes are checked for allowing file and printer sharing

for TCP/IP, i have:

Computer #1:
IP: 192.168.0.1 Subnet: 255.255.255.224
Computer #2:
IP: 192.168.0.2 Subnet: 255.255.255.224

Workgroup (on both): JAESUN
Computer Names:
Computer #1: TypeSK Computer #2: SouthK

DNS:
DNS is disabled in both computers

Gateway:
no gateway is listed on both computers

using a crossover cable between the two computers (used to have a hub and 2 regular RJ-45 cables, but its being borrowed now).

both computer NIC cards light up when the cables are plugged in
i have shared the folders i needed to share .... so... Read more

A:basic networking (at least i think its basic?)

Read other 16 answers
RELEVANCY SCORE 33.6

Hello,

I guess my question can be asked in two ways, the short way and the long way.

Here's the short one:

Can you do everything that you can do with VBA with VB?
The long one is:

I need to be able to write programs that conceivably invovle web forms/web services (VB right?), Microsoft SQL Server 2002 (VB again right?) but also Microsft Office applications like Excel and Access (VBA??). Does that mean I need to learn both Visual Basic and Visual Basic for Applications? In my initial research into Visual Basic I've learned that Visual Basic for Applications is a subset of Visual Basic, so shouldn't that mean that Visual Basic, being the parent and more powerful than Visual Basic for Applications, is capable of performing all of the functions that Visual Basic for Applications does?

Thanks for your help,
Bsdslayer
([email protected])
 

A:Solved: Visual Basic vs. Visual Basic for Applications

I do not know VB at all, only some VBA. The main difference is that VBA has words specifically for the applications, a classic exanple would be the
Range("a65536").End(xlUp)
both range and .End(xlUp) are for use in Excel.
 

Read other 3 answers
RELEVANCY SCORE 31.6

This is inexcusable! I paid over a grand for my Dell. Does Dell care that I don't even make a living wage? Capitalists are freaking monsters. And you won't get me to change my mind about that no matter how many hospitals in Yemen you bomb or how much you rant about non existent Russian aggression. Cost cutting? I think neoliberal capitalism, and gangster Corporatocracy and mafia capitalism are all things we can't afford, ergo... I don't even earn a living wage while corporations cost cut, job cut. tax evade and push governments to sign evil "free trade" agreements giving them more power, at our expense. What's wrong with this picture?

Read other answers
RELEVANCY SCORE 31.2

Recently upgraded a Dell Inspiron 3847 to an SSD and did a clean-install of Windows 7 Home-Premium x64 using Dell media. Post install, I cannot get the audio working. Device manager shows ...
Bluetooth Audio DriverHigh Definition Audio Device (yellow exclamation point)Realtek High Definition AudioI have tried the following to fix:
1. Uninstalling and deleting the driver then re-downloading using Dell Detect 2. Installing the RealTek R282 driver from the RealTek site3. Windows Update does not find the driver if it is uninstalled4. Right click on entry in device manager and letting Windows find it5. Installing it manually from the Dell siteAny help is greatly appreciated and thanks in advance.

A:No Audio Post Clean Install. Realtek Audio Driver Installed but High Definition Audio Driver fails every time?

same principle as mentioned here: en.community.dell.com/.../20027104

Read other 1 answers
RELEVANCY SCORE 28

m audio 1010lt sound card

not sure why..usually when I shut down it restarts automatically..recently i was watching a movie and it restarted out of no where..any help appreciated.... windows ultimate 7 amd 6000 3.0 ghz processor 4 gb ram I did do some searching i do have m audio 1010lt and someone here had similar problems with audio being glitchy...just looking for help

Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033

Additional information about the problem: BCCode: 1000007e BCP1: FFFFFFFFC0000005 BCP2: FFFFF80002D02741 BCP3: FFFFF88003A2BB68 BCP4: FFFFF88003A2B3C0 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1

Files that help describe the problem: C:\Windows\Minidump\091412-19390-01.dmp C:\Users\Exactly\AppData\Local\Temp\WER-36863-0.sysdata.xml

If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt


Uploads wasnt working so I uploaded file to my sky drive here:

https://skydrive.live.com/redir?resi...FBzOqIS7INYINo

A:restart problem BSOD glitchy audio win7 ultimate w/ m audio 1010lt sou

here it is upload worked

Read other 1 answers
RELEVANCY SCORE 28

I just bought a notebook Lenovo G450 and I had drivers not found problem. My OS is Windows XP SP2. In Device Manager, there are four "Audio Device on High Definition Audio Bus" device with exclamation mark. Below is the link to the screenshot of my device manager (pardon me, you have copy-paste the link manually since my post count is still below 5 so I cannot post link/image here):

There is no sound problem since I had successfully installed the sound driver from lenovo (The name is "Conexant High Definition SmartAudio 221" as you can see on the screenshot above) and the sound is working without problem. I also had installed Microsoft UAA Bus Driver before installing the sound driver.

I had tried installing realtek and nvidia high definition audio driver and all required drivers from lenovo (http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=370748), but still no avail. The four yellow exclamation marks is still exist.

So I need help to identify what actually are the devices that shown as "Audio Device on High Definition Audio Bus"? And where can I get the driver for that devices?

These are the device IDs:

Code:
HDAUDIO\FUNC_01&VEN_10DE&DEV_000B&SUBSYS_10DE0101&REV_1001\5&15CAAF27&0&0001
HDAUDIO\FUNC_01&VEN_10DE&DEV_000B&SUBSYS_10DE0101&REV_1001\5&15CAAF27&0&0101
HDAUDIO\FUNC_01&VEN_10DE&DEV_000B&SUBSYS_10DE0101&REV_1001\5&15CA... Read more

A:Audio Device on High Definition Audio Bus driver not found on Lenovo G450

I'd advise you should first upgrade to SP3. Then report back if you still have the problem and can proceed from there
 

Read other 12 answers
RELEVANCY SCORE 28

I have a Lenovo Thinkpad E550 laptop with Windows 7.

There are no enhancement features in the speakers properties section. I have realtek card reader...do I need realtek driver? I read that not all motherboards use realtek audio chips.

What would be a suitable/compatible FRE audio driver to download to enable louder sound.

Read other answers
RELEVANCY SCORE 28

My audio rear outs used to work, but even so, i was primarily using hdmi out from my video card. I was also diagnosing BSODs at the time and sent my mobo back to asus for an rma. When it got back, I placed it in a different case and attached the font panel audio.

Due to a new living circumstance, I decided to switch back to the normal audio out, as my hdmi sound is awful on my new monitor. Problem is, now i find that the onboard audio does not work.

I have tried uninstalling/reinstalling and updating drivers, I have disabled all other drivers in the device manager, I have disconnected the front panel entirely. Nothing seems to re-enable my back panel.

Everything seems like in this thread Just got done building a new computer but... - techPowerUp! Forums
except my audio interface is ASUS, not MSI, and does not allow for front panel detection. (their solution was to "disable front panel jack detection" but this interface does not allow for this)

See the attached screenshots for interface.
Screenshot #1: As you can see, this is all the advanced settings allow. Also note that the bottom jacks are disabled, and does not see the speakers at all, even though they are plugged in.

Screenshot #2: This is with the HD settings enabled.

Screenshot #3: As you can see, there are no devices shown while HD audio is enabled, and the sound device manager does not see the speakers at all.

Screenshot #4: When I change to AC97, the computer sees the front panel, ev... Read more

A:Asus onboard audio no longer working since enabling front panel audio.

Have you tried system restore, or tried reinstalling the software/driver etc?

Read other 4 answers
RELEVANCY SCORE 28

Satellite L755-S5306 has been awkward with audio since Windows 10 upgrade. I was aware it was 'not supported' but thought maybe it was just a matter of time until it would be...

I see countless Toshiba Satellite model variations with awkward headphone jack function (must select as device in software rather than simply plugging in to disable speakers), and recurring loss of audio while in use...10-50 seconds into playback (multiple applications, software, browsers).

Am I correctly seeing the writing on the wall?

Microsoft says go reinstall the drivers in compatibility mode, etc.

There simply are no drivers for Windows 10 for my model (and others). Toshiba help suggestions just direct me to soft panel control usage instructions or Microsoft.

Troubleshooting finds no problem.

It seems pretty simple. I installed Windows 10 despite being told it wasn't supported. My choice, my fault, my problem?

In March 2017 I still see an absence of support. This seems like a fact of life...a dead end..no options...take a hint, self...

If this model is not supported for the current Microsoft operating system, do I need to just wipe the hard drive and install Ubuntu? Windows 10 weill not allow regression to Windows 7 due to time elapsed since upgrade.

Buying a new laptop with fingers crossed hoping Windows 10 is supported is not appealing to me.

Thank you

Murray

A:Satellite L755-S5306 - Windows 10 - no audio drivers - recurring loss of audio

Originally Posted by murrayatuptown


Satellite L755-S5306 has been awkward with audio since Windows 10 upgrade. I was aware it was 'not supported' but thought maybe it was just a matter of time until it would be...

I see countless Toshiba Satellite model variations with awkward headphone jack function (must select as device in software rather than simply plugging in to disable speakers), and recurring loss of audio while in use...10-50 seconds into playback (multiple applications, software, browsers).

Am I correctly seeing the writing on the wall?

Microsoft says go reinstall the drivers in compatibility mode, etc.

There simply are no drivers for Windows 10 for my model (and others). Toshiba help suggestions just direct me to soft panel control usage instructions or Microsoft.

Troubleshooting finds no problem.

It seems pretty simple. I installed Windows 10 despite being told it wasn't supported. My choice, my fault, my problem?

In March 2017 I still see an absence of support. This seems like a fact of life...a dead end..no options...take a hint, self...

If this model is not supported for the current Microsoft operating system, do I need to just wipe the hard drive and install Ubuntu? Windows 10 weill not allow regression to Windows 7 due to time elapsed since upgrade.

Buying a new laptop with fingers crossed hoping Windows 10 is supported is not appealing to me.

Thank you

Murray




Hi Murray,
I have the same problem with the same laptop. ... Read more

Read other 2 answers
RELEVANCY SCORE 28

Hello, my name is steven and I would like to begin by saying that I am an amateur when it comes to working with computers. I wanted to free up space to operate my computer faster and hopefully stop lagging while playing games or just browsing for that matter and it seems the only certain amount of RAM to add to increase my speed is the lowest that is sold @ kingston technology which is a 1GB card. Unfortunately, being the amateur I am, I was stumped here , http://www.kingston.com/us/memory/system_specific/server where they ask for my manufacturer, product line, and model. I plugged in all the numbers I could think of that might work for each but nothing matched when it came to the model # and I personally have no clue what my product line is so as I said I was just guessing I have all the information about my computer (from what I believe to be the complete transcript of it) and I just need to be able to answer the questions on kingston technologie's website so I can get my recommended RAM card that will hopefully be compatible with my computer. Nothing about product line is stated and the manufacturer of the cpu is unclear and so I would like help identifying the answers to the three questions posed on kingston technologies website.

IDT High definition audio codec (code 10)
The title explains it all I went into device manager and the only thing with an ! on it was the IDT high definition audio codec and "PCI simple communications controller" beside it under t... Read more

A:Solved: RAM limit and Audio IDT high definition audio codec code 10

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) D CPU 2.80GHz, x86 Family 15 Model 4 Stepping 7
Processor Count: 2
RAM: 1022 Mb
Graphics Card: NVIDIA GeForce 7300 LE, 512 Mb
Hard Drives: C: Total - 238409 MB, Free - 192384 MB;
Motherboard: Dell Inc., 0FJ030
Antivirus: McAfee VirusScan, Updated: No, On-Demand Scanner: Disabled

These are my computer stats using the techguy's software to identify my information
 

Read other 3 answers
RELEVANCY SCORE 28

Hello All!!

I have seen similar threads here but my problem is slightly different.
I have ASUS P4S8X-MX which have built in audio of Realtek AC'97 .
I am using Windows XP SP2 for quite a time and everything was fine unless i tried to install an updated driver for my sound. After updating, i got Code 10 error , device cannot start.
I uninstalled the drivers, Restart my PC and then installed my previous version of drivers.
Everything was fine and i can see volume icon in task bar. But when i tried playing an audio file there wasn't any sound. I clicked volume icon to raise it but it was disabled.
I double click it to open Mixer .. there are only 3 options (normally it use to have lot ..wave,speaker,etc..) Now it has only Wave , SW Synth, CD Player.. and No recording device.

I did try re-installing the drivers again and again but no LUCK..

I tried using Drivers Sweeper to remove the tracks .. doing that in Safe Mode and then again Installed Old drivers. It all go well but in the end its same situation with sound disabled.

I don't want to reinstall my Windows , is there any way to fix it ?

One thing i noticed is every time I install drivers the sound manager shows up at task bar but in moments it disappears while the soundman.exe is running in Processes and I can't find it in Control Panel as well (where it use to be) .


Its been 8 hours since I am struggling with that. But No LUCK!

Note: My PnP Software Device Enumerator is worki... Read more

A:Realtek AC'97 audio - drivers installed properly & services running but no audio

Hi muazzam

Is best to upgrade to SP3 (if only because MS has dropped support for SP2) but can start, for now, looking at your problem while you continue running with SP2

Let's start with these initial steps
1) List any Problem Devices

Make sure all your devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
2) Generate and attach a DirectX report

click Start->Run, enter dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save to your Desktop
In TechSpot, use the paper clip icon to attach the report. (If you don't see icon you may need to first click Go Advanced)
3) If there were no Problem Devices (step 1 above) then also check on your Windows Audio service if Status=Started and StartupType=Automatic

I'll have a look and we can take it from there
 

Read other 12 answers
RELEVANCY SCORE 28

Hi and thanks for looking

HP Dv9705ea. In a mess; History uncertain (belonged to daughters friend) and Ive been asked to fix it.
So reinstall Vista (Home Premium) SP2 x86 - no problem
Windows updates - no problem
But - no sound. Speaker icon has red cross and message No Audio Device Installed
Control Panel ->Sounds: Same message (Disabled and disconnected devices both ticked)
Device manager has no sounds device (not even an audio, video and game controllers group) even with show hidden devices)
I checked the HP website and there are two sets of audio drivers (Conextant and Raeltek)
Tried installing Conextant but they reported 'no hardware found'
Raeltek installed OK with no messages (so hopefully the PC has Raeltek audio hardware?)
But still no sound

So I am beginning to think I have a hardware problem? Is this likely?
Is simply replacing the sound card likely to fix it?
All thoughts welcome
KR
R

PS I ran SFC /scannow. Trying to open the log file CBS produced an audible beep (with the error message access denied) ! First sounds Ive heard the PC make!
SFC reports that it fixed a number of corrupt files so I rebooted

A:No Audio Device Installed; No audio, vidweo game controlers group

90% is an hardware problem...can you please tell me what happens when you connect the headphones into the jack?
if you can hear sounds there is a problem on integrated speakers...otherwise there is a problem with your audiocard...BUT download and burn a Linux UBUNTU LIVE distribution and launch it....try to play any sound...if works torough integrated speakers, you may have got wrong drivers for your windows installation.

Read other 5 answers
RELEVANCY SCORE 28

Hello,

I have Windows 7 Ultimate 64 bit and I have a problem with sound. When I plug my speakers in front panel I have output audio, but in back panel I don't.

My Audio Manager looks like this, but front panel is enabled and back panel is disabled. It does not recognize back (ANALOG) jack.


I tried with settings in this manager but without success, I cheked Control Panel > Sound and followed instructions but still no sound if speakers is in back panel. What to do?

P.S
Sorry for bad english

A:No sound in back audio panel jack - Realtek HD Audio Manager

What is set as the Default Playback Device? If "Digital" or "HDMI" is set as default you will not get any sound from rear audio connections. "Speaker" must be set as Default Playback Device/

Read other 7 answers
RELEVANCY SCORE 28

I'm having a strange problem in my HTPC. Audio is coming perfectly fine out from the S/PDIF coaxial output, and it's normally connected only that way to the receiver, but now for other reasons I also need to connect it using a 3.5 mm to a small mixer. So in the sound manager I changed the output to the "Speakers", and in fact the Realtek sound manager detects that a cable is plugged into that output and shows me the dialog where it's selected. Problem is, nothing comes out.

I know it's not the 3.5mm to RCA cable because I plugged in my phone, played some music and I can hear it just fine. But the rear speaker (green) output puts out no sound at all, as I also tested it plugging headphones. On the Sound Windows panel where you can select the playback device I can see the volume level move up and down when I'm playing any media file, as well as in the Volume Mixer. If I switch back to the S/PDIF output and change the input in my receiver, audio is coming just fine.

I haven't tried the front outputs because they are not connected. The motherboard has HD Audio but the case has AC97 connectors, so I never cared to connect them because I don't use them. I know the rear green output worked at some point because I remember having a pair of computer speakers connected to it a few years ago.

This is a Gigabyte GA-890FXA-UD5 (rev. 2.1) motherboard with an AMD 1090T and 16 GB of RAM, with Windows 7 Home Premium. The installation is about two months old wi... Read more

A:Realtek ALC889 audio, audio fine on S/PDIF, nothing from rear output

I found out after a while. In the popup dialog when a cable is plugged in, I had selected "Rear speaker out" mistakenly thinking it was talking about the rear output, not the rear speakers in a 5.1 speaker setting. Changing to "Front speaker out" solved the problem.

Read other 1 answers
RELEVANCY SCORE 28

My front USB slots work and every connector on the rear works fine yet when
i plug headphones into the front audio jack and nothing is detected.

My Bios are updated to the latest version, i have also tried switching to AC97 but makes no difference. Swapping between HDMI and s/pdif doesn't also does nothing.

The case is a fairly cheap case being a SHAW GT-M2 although it is new.

I have a dual boot of Windows 7 and OSX Lion the front doesn't work with either.

All drivers are up to date with no yellow ! in device manager

A:No front Panel audio detected but Rear Audio works on Asus P8H 61-M LX

Check to make sure that the front panel audio cable is actually plugged into the audio header on the motherboard. If the motherboard has HD audio and the front panel has a plug marked HD-Audio, then plug that into the motherboard. Make sure that it is correctly lined up, otherwise the front panel won't work correctly.

Read other 9 answers
RELEVANCY SCORE 28

Hi, please help.
I accidentally uninstalled audio device on high definition audio bus...now it has a yello exclamation mark and won't update. Under audio it says I have no audio device. I have windows XP, service 3 pack... and I hope this is the number you would need 55274-640-8725436-23218? thanks

A:No sound, accidentally uninstalled audio device on high definition audio bus

What is the make and model# of your computer? Or if a custom build, the make and model# of your motherboard? Go to the Manufacturers Support/Download Drivers site, type in your make and model # and download the Audio Driver for your computer.

Read other 3 answers
RELEVANCY SCORE 28

I have the ThinkPad X1 Carbon.  My headphone is perfectly fine. When I plug into the headphone jack, there is no audio from the headphones just the speakers. I plug and unplug my headphones several times to make sure but the audio still plays through the speaker. I tried this with 3 other headphones and the same happened. I tried everything to fix the issue: updating the drivers, changing the RealTek setting to multi-stream, setting the Speaker/HP as default, etc. you name it. When I plug in my headphones, it doesn't appear as a device. I don't think it's a hardware problem. Everything was perfectly fine before but it suddenly stops working. Please help!

Read other answers
RELEVANCY SCORE 28

Just reinstalled windows xp. Reinstalled all my drivers, but I'm not sure what this "audio device on high definition audio bus" driver is; that device driver has put that yellow question mark next to. I've looked and looked on Google, it seems some people have fixed with video card drivers, others, motherboard drivers. I'm using a fatality pro soundblaster card.

I've tried to download the audio drivers for the maximus formula, but I believe this goes to the sound card that comes with the mobo, which I am not using. When I try to install, it says that it doesn't match my hardware, and aborts.

I have also disabled on-board sound or the equivalent thereof for this board, in BIOS.

My chipset is X38, and my SB is 82801IR (ICH9R).

Also, if it helps, the device instance id is:
Quote:




HDAUDIO\FUNC_01&VEN_1002&DEV_AA01&SUBSYS_00AA0100&REV_1000\7&522A099&0&0001




Oh, and thanks!!!

A:audio device on high definition audio bus -- ASUS Maximus Formula

Are you getting sound through the sound card? Did you install the drivers to the sound card? Try to enable on-board and see if you get sound from the card? After you enable on-board, install drivers for it, then go back and disable it so it might shut up.

Read other 9 answers
RELEVANCY SCORE 28

Hello

I am new to this forum. I have searched for related problems here but did not find anything relevant, my apologies if this is a duplicate. What follows is a copy of a message sent to VIA (in Taiwan apparently):

I seem to be having some issues with your VIA High Definition Audo drivers in an Asus K60IJ-series laptop (purchased in 2010). The driver version is 6.0.1.7333 dated 09/07/2009. It works fine on its own but when I try to add an external audio device to the system, I run into problems:

- I was not able to make a Toshiba Bluetooth Stack (driving a Kensington K33902 dongle) produce any audio: Windows will not let me set the bluetooth-connected external audio device (Logitech Bluetooth Audio Adapter, provides no Win7 drivers) as a default device while you drivers are installed. If I remove your drivers and allow Windows to install its default drivers instead, I can now choose the Bluetooth device as default but still get no audio out of it, nor out of your VIA audio chipset either (it seems the generic Windows drivers are not compatible with your chipset).

- Am having similar problems with a Creative Digital HS-1200 bluetooth headset: the headset is automatically set as default when the Bluetooth interface is plugged into USB port, but the default can't be changed, and Windows Media Player complains that there are no audio drivers for it (it appears OK under Device Manager)... YouTube continues to play through the VIA despite. The headset works fine on a... Read more

A:Laptop audio problems possibly involving built in VIA High Def Audio

Hello sybernut mate this is the site where you need to go to get drivers the Windows feature is not something I am a fan of and find it is far better to get the drivers straight form the machine's manufacturers site or the device in side the machine site.
http://support.asus.com/download.aspx?SLanguage=en&m=K60IJ&os=17 - in the manual section it tells you how to set up Blu tooth stuff. The drivers are all there - I am linking to the Asus K60IJ notebook form your specs.

Now if you want in depth details of the components see this
Using HW Info
PART A:
You can test the volts on the PSU with HW Info HWiNFO, HWiNFO32/64 - Download < download the right bit version and close the right hand window select Sensors and scroll down to the power section where you will see what the volts are doing see my pic.
The original right hand window shows the machine running and is handy for that but for looking at the components in some detail close it and use the main left hand side panel
FOR OTHER COMPONENTS
PART B:
Open each small square with + in it on the section the components are in and then click on the individual component/s (it will highlight in blue) - in the right hand side will appear all sorts of details including brands speeds and other essential info that particular device. See pic for example.
Use Part B: (see pic for an example - I have shown you my RAM you need to click on one of the +'s until you find the Blu tooth info probably Network)

Read other 2 answers
RELEVANCY SCORE 28

I have a self-assembled desktop PC - full specs in the signature below, but in short, it has an AMD Phenom II X6 1090T processor on a Gigabyte GA-970A-DS3P mainboard, which uses a Realtek Azalia ALC887 on-board sound system. I have no loudspeakers and listen to the computer sound exclusively through a Microsoft LX-1000 headset. I also have a Logitech C270 HD webcam that has its own microphone. My PC has 16 GB RAM, a SSD and a large HDD. It runs Windows 8.1 Update 1 with all Windows updates (Patch Tuesday was this week, but my problems had started before that and I'm sure they're unrelated).

Everything is working fine, except the audio, which started behaving strangely a few days ago. The problems started suddenly and I can't think of anything that could have caused them. There were no hardware changes or any intervention in the hardware, nor did I install any new software that could have messed up things.

When playing music, it sounds muffled, with the volume very low and the voice and several instruments muted, while other instruments in the background arrangement sound louder. No graphic equalizer is on, and this happens with any player software (Windows Media Player, VLC, Media Player Classic, etc.), and any source (MP3 music, audio CDs, DVDs, videos, etc.). There appears to be no hardware problem with either my headset or the onboard audio: when I run both Windows' native and Realtek's driver sound output tests, the test tune comes out loud and clear in the tested chann... Read more

A:Realtek audio, Gigabyte mobo: strange-sounding audio, mic not working

First thing to do is disable or disconnect the Web Cam. They have been known to cause various sound problems. It may not be the problem, but eliminate it as the problem.

Stereo Mix needs to be set as the Default Recording Device.

Refresh the RealTek by going to the Device Manager, RIGHT click on the RealTek entry in the Sound section then LEFT click "Uninstall". DO NOT uninstall the drivers. Restart the PC and when Windows starts it will reinstall the sound. This usually fixes any Windows/Sound corruptions. If this does not fix it, download and reinstall the RealTek sound drivers.

Read other 1 answers
RELEVANCY SCORE 28

I am running Windows 7 Home Premium on my Dell Inspiron E1505.

I have had no problems with it for several years; however, recently my computer has booted with a red 'X' on my audio and tells me that "No Audio Output Device is Installed." I checked my Drivers and my High Definition Sound and 2 Base System Device drivers have Yellow Question Marks by them. I tried to update the drivers manually but it says Windows Cannot Find Support for your Base System Device and it says my High Definition Audio is already up to date. I have also tried uninstalling the drivers and rebooting Windows to let the system automatically search and update the drivers. This too has failed. I do not have my Windows 7 disc available at the moment to be able to do a clean install.

Any help you could give would be greatly appreciated.
 

A:No Audio; Driver Downloads Fail and No Audio Output Device Installed

http://www.dell.com/support/drivers/us/en/19/Product/inspiron-e1505

Dell link to driver downloads. Start there for now.
 

Read other 1 answers
RELEVANCY SCORE 28

In Mac OS Quick time does this (I can have 10 audios all playing simultaneously). WMP nor VLC seem capable of this.

I need a solution to this for both Linux/ubuntu and Windows 7. Maybe there's a way to customize vlc or wmp?

Thanks.

A:I need an audio player capable of playing multiple audio files simul

Multiple instances of MPC maybe?

Read other 2 answers
RELEVANCY SCORE 28

Hi,

Got a niggling problem with installing a driver for my onboard sound. I recently bought a motherboard bundle (Nforce 7050M-M) and I have got everything working fine but I just cannot install the driver for this. I'm currently using OS XP SP3.

It seems like I have tried every everthing that i've seen posted on a similar problem. I have all the latest drivers for windows, motherboard & Bios.

When I first had the problem it was a code 39 error on the device manager, now its a code 1 error (i'm can't rembmer at what point this changed as i've tried so many things).

Does anyone have solution for this problem?

Please help, thanks.

Read other answers
RELEVANCY SCORE 28

hi 
im using dell inspiron 15-3521 whenever i connect earphone/headphone to my laptops jack only the left side of the speaker work right side has no sound (inbult laptop speaker works fine).my friend asked me to download (0005-Win7_Win8_Win81_Win10_R279) driver from realtek web site and  I installed it and the problem was solved and this was about 6 to 7 months back
but now im facing the same problem i did the same what i did last time  i downloded and re installed the driver but of no use the problem still presists.
so plz guide me what to do to solve the problem.
thank you umesh.

A:audio problem when earphone/head phone is connected to 3.5mm audio jack

Test by switching between the Realtek audio driver and the Windows native audio driver.
1. Open the Device Manager (find it in the Control Panel, or type devmgmt.msc into the search box).2. Expand the "Sound, video & game controllers" and right click on "Realtek High Definition Audio".3. Select to "Update Driver Software".4. Click on "Browse my computer for driver software".5. Click "Let me pick from a list of drivers on my computer".6. Put a check in the box "Show compatible hardware" if not already checked.7. In the list of devices, click "High Definition Audio" (the native driver).8. Click "Next".9. On the Update Driver Warning box, click "Yes" (install the driver). 10. Restart the laptop if prompted. If not prompted, then no need to restart.[To get back to the Realtek driver, do it again but reverse the names in steps 2 and 7.]
If it still does not work correctly when the native driver is installed, then the hardware in the headphone jack has failed.
But if the same problem is there with the native driver then you should install a different version of the Realtek driver. I might be able to direct you to one but would need to know which operating system you are using.

Read other 10 answers
RELEVANCY SCORE 28

I make music with my computer and therefore the onboard sound card that came with my motherboard is disabled and I've installed a dedicated sound card instead. The soundcard I work with is an M-Audio Delta Series 2496 Audiophile PCI card. I've been using this card without problems for about 5 years.

Today the card seems to have stopped working and I suspect it has something to do with recent stuff I've been doing with my computer.

Here is stuff I did prior to my soundcard's failure to work. I have no idea which if any of these things are related to the problem or not. I also have know idea at what stage the sound stopped working.

YESTERDAY:
- a friend came with an mp3 player (Creative ZEN Jukebox). He had some data on it (using it as a kind of external hard drive) which he wanted to transfer to my computer.

- I downloaded/installed the latest driver and plugged it (via USB) to my computer. The computer recognized the device, but for some odd reason it did not show all the data. We tried several things including re-downloading and re-installing the driver and installing a media player app by Creative but nothing worked. I uninstalled the driver and the Creative app.

(at this stage I remember my audio was fine, because I listened to some music. This was the last time I attempted to use audio before first noticing the problem)
TODAY

- I realized that when installing the Creative app I had without noticing installed some bundled software that scans for... Read more

A:Solved: M-Audio PCI Delta Series Audio Card Stopped Working. Please Help

To start, I would uninstall any of the m-audio software. Once done, shutdown the system and pull out the card. Pw ON the system and let it fully boot. Download the latest driver for your sound card. Now shutdown again and install the sound card. Restart and attempt the driver install.
 

Read other 3 answers
RELEVANCY SCORE 28

Hi,
Recently, I started getting problems with my audio on my alienware X51 R2 (I'm on windows 10). After a long time of searching for solutions all over the internet like on forums, I've come to the point where the only possible solution to my problem is using the realtek hd audio manager. The problem is: I can't access it on my alienware device since it is completely replaced by your poor version of it "Alienware Audio" wich does not have any of the options I need. How could I restore the original version of this software or at least disable the alienware audio version?

Read other answers
RELEVANCY SCORE 28

Hi,

I finally upgraded from Windows XP to Windows 7 and almost went back shortly after finding out I could no longer organize or manually arrange my own personal files and/or folders but luckily I discovered an application called 'Folder Options X' which has re-enabled that feature for me so I'm happy to be upgrading .

I'm having a few issue's with my audio playback options. I'm using an audio application called SRS Audio Sandbox Version 1.10.2.0 which doe's work with Windows 7 because when I first installed it was working perfect for a good few weeks time but recently I downloaded Realtek HD Audio Manager 2.57 to enable me to playback audio through my monitor speakers but it seems to have changed my audio setup ?

I have a 5.1 Logitech z906 speakers which take up green, black & yellow ports and my monitor has a green audio jack which I plugged in green and my Logitech's green jack I've plugged into Blue and used Realtek HD Manager to change Blue port to a Line Out option.

It appears to work accept when I do Speaker Playback Test clicking on diagram only left & right speakers playback noise though when I do it with headphones on all speakers playback noise: Left, Right, Center, Sub Rear Left & Rear Right not sure if that's normal ?

Under Sound proprieties my Realtek HD Audio is set as the default playback device in which both my speaker & monitor playback music but I need it to playback through SRS Audio Sandbox so I can manage and adjust the sound but whe... Read more

A:Audio Playback (Default Device Realtek) Knocks Out SRS Audio Sandbox

Reading some users comments on the Sandbox "audio enhancement" most comments are negative about this product. SRS Audio Sandbox - CNET Download.com

If it worked at one time and now does not, have you tried making it the default audio playback device rather than the RealTek? Or have you tried reinstalling it?

Read other 3 answers
RELEVANCY SCORE 28

 So I was in this website (dashboard.zopim.com) for working purposes and whenever I get a chat request there's a sound and somehow my computer stopped with the sounds. I restarted the computer and there was a mute symbol in the audio, and I got really surprised when I tried to unmute it and got a message like "there is no audio installed" . I went to the system settings and saw that 2 icons - Intel High Definition DSP and Intel High definition display audio had a yellow mark. I went to Lenovo's website and downloaded the driver and it didn't work. Then I found some instructions on microsoft's website. It worked but then I had to use the site again and... Not working! I made it work again but now there's a delay. Sometimes there's no delay on the sound and sometimes there's about 5 sec. Please, help!!!!!!!!!!!!!!

Read other answers
RELEVANCY SCORE 28

Obligatory system specs

Dell Inspiron 1545

OS:Windows 7 Home Premium 64bit

Cpu: Pentium Dual Core T4400-2.20 GHz

Ram: 3 GB DDR2

Graphics: Intel 4 series express chipset- Integrated

Audio: IDT High Definition Audio CODEC
Microphones do not work. Any microphones.

Occasionally, after a restart, if I open dell webcam central it will make my built in microphone work for a little while but, it then later, randomly seeming, stops working.

I've tested several external microphones and they do not work either. Before you ask, yes I did make sure they were enabled and un-muted, I have also updated the drivers on my sound card. I ran a windows diagnostic test and it said there was nothing wrong with my mic. I have absolutely no idea what the hell is happening.
Here's my DX Diagnostic

------------------
System Information
------------------
Time of this report: 2/10/2014, 11:52:37
Machine name: NEWPC-PC
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120830-0333)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Inspiron 1545
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A13
Processor: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz (2 CPUs), ~2.2GHz
Memory: 3072MB RAM
Available OS Memory: 3032MB RAM
Page File: 2578MB used, 4952MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DP... Read more

A:Input audio doesn't work, output audio does.no obvious solution

bump
 

Read other 1 answers
RELEVANCY SCORE 28

Lenovo Yoga 3 11 - model 80J8:  out of warrantyI have done several searches and it seems there is a fairly common problem with some Yoga machines and audio.  All of a sudden a few months ago, the internal speakers went silent.  I did not notice it because I don't use it much for streaming audio, but when I do, I connect it to external speakers.  Audio to an external source functions fine, but internal speakers are silent.  Control panel and Device Manager show speakers functioning properly.I have read previous postings back to 2015 and it seems there is no real Lenovo reply or fix for this problem.  I have already tried to update the Realtek driver and that had no effect.  I am not willing to restore to factory default, since this machine shipped with Windows 8 and I upgraded to Windows 10 a few years ago.  The audio worked fine after the Windows 10 upgrade.  Respectfully, please only respond if you have factual data, rather than speculation.  This problem is well documented in the forums and elsewhere, but I have yet to find something concrete.I thought it may help to add a thread on the subject, as I expect others with the problem are frustrated, especially since there does not seem to be a formal response from Lenovo (that I can find)..  Thank you in advance!

Read other answers
RELEVANCY SCORE 27.6

I noticed this morning that the amber audio mute light stays on all the time and the audio quality is not as good as it was.

A:The amber audio mute light stays on all the time. The audio ...

Hi,Have you tried installing the IDT High definition audio driver for your system? http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_151294_1 Let me know,David

Read other 1 answers
RELEVANCY SCORE 27.6

When I live steam video in Windows 8/Chrome, using Adobe Flash, the audio portion is silenced each time I receive an audio prompt from my system. When I say "audio prompt" I mean a beep that I believe provides some sort of notification. The video continues, but all sound disappears for a few minutes when it then reappears. I have a dual boot system. The problem only exists in Windows 8. In Windows 7 I do not have this problem. My Chrome is fully updated, which means, I believe, that my Adobe Flash is also current. I disabled (or at least attempted to disable) audio alerts in Windows 8 and in Outlook 2007 and GMail (my email clients), but the audio alerts persist as do the disruptions of Java Live streaming audio. Any ideas or suggestions for fixing this problem - either by disabling all audio prompts or solving the problem of sound disruption in Java Live Streaming.

A:Audio Alerts Disrupt Java Audio While Live Streaming

hi,on your desktop ,using your mouse highlight the start icon lower left corner ,and right click on and go to control panel/sound/ click the sound tab and check off no sounds,and click for no sounds in sound scheme

Read other 3 answers
RELEVANCY SCORE 27.6

I've been having trouble getting clear audio consistently with my new headset on my laptop which is currently running Windows 7. I have tried reinstalling the driver, restarting my laptop, combinations of restarting and reinstalling driver, replacing the headset (before I realised it was a computer problem), even flashed the BIOS to see if that would help, also tried using different USB ports, nothing has fixed it and if it does it lasts 5 minutes before it starts to crackle and sound quality degrades again. I cannot think of anything else that I can do to fix this. I have looked for a fix on Logitech's website which directed me to Microsoft but none of the solutions posted has fixed the problem. Headset works perfect on boyfriends computer, also running Windows 7, and my boyfriends headset (same as mine) has the same problem when plugged in to my laptop. Any help would be appreciated.
 

A:Having trouble with audio on my Logitech ClearChat™ Pro USB Headset, distorted audio

Read other 8 answers
RELEVANCY SCORE 27.6

Motherboard :asus p5kpl-am se (no sound card)
vendor id :1106
device id :0397
problem: digital audio (S/PDIF) no sound
OS : Windows 7 ultimate 32bit

i've download numerous latest driver on the official website of VIA and installed it, yet no different..
i wonder if anybody can help me with the link or another solution..

A:VIA High Definition Audio ,no sound digital audio (S/PDIF)

Answered on your other duplicate post. To get speaker or headphone audio you need to set the "Speakers" as the default audio playback device.

Read other 1 answers
RELEVANCY SCORE 27.6

Hi Friends.
Which audio driver is suitable for 82801 G (ICH Family) High definition audio Multi media?

I have installed realtek audio driver. Its in C: drive program files. But not showing in

My computer -> properties -> hardware -> device manager -> sound, video and game controllers.
ain't getting system default sounds too.

How can i install Realtek audio driver software under sound, video and game controllers?
Or is there any other suitable driver? and How can i install it?
Please help ...
P.S - PC Configuration : Core 2 Duo processor, 512 MB DDR2 RAM, 160 GB HDD.
 

Read other answers
RELEVANCY SCORE 27.6

Hello
I have XPS 9560.
I am not happy with how Maxx Audio amplifies my speakers - it seems to overamplify them and then they resonate with the chasis, producing an annoying distortion every time I watch a movie or a tv show. I turned off Maxx Audio profile and it didn't help.
I then disabled Maxx Audio service and service application in startup, and the sound is now good, however, now when I plug in my speakers into the headphone jack, the audio is no longer routed, and the laptop always outputs  audio through internal speakers. Also, that annoying audio switching popup no longer shows up.
So - how to disable Maxx Audio, while keeping audio routing functional?
PS. I would appreciate not to be asked questions like is my Windows updated, are my drivers up to date etc. Support engineers should already be aware of this problem given how well documented it is.

Read other answers