Over 1 million tech questions and answers.

Win 7 x64 BSOD - I know it's software but which part?

Q: Win 7 x64 BSOD - I know it's software but which part?

Hello, please help.. getting a 0x000000d1 error on win 7 pro x64.

This is a clients laptop, only one month old with factory installed win 7 pro. Only updates, office 2013, outlook 2010, Avast AV and some company bespoke non-invasive software installed.

Been getting these BSODs for the whole time since active usage.

I've tried lots of google threads without success, I think it's a driver issue??

I'm really stuck here, although I'm an 'IT Guy' with 15 years in the business I've never looked into diagnosing dump files etc.

I appeal for your help, please find attached the collected sys info/dumps.

Jamie

RELEVANCY SCORE 200
Preferred Solution: Win 7 x64 BSOD - I know it's software but which part?

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Win 7 x64 BSOD - I know it's software but which part?

Lets take a look.


Code:
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000006f77320, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880058d9b3d, address which referenced memory
So we tried to read invalid/pageable memory at an IRQL of two which is an illegal operation that will always result in a bugcheck.
Whether the memory was pageable or invalid is still unknown as the dump file hasn't saved that information.


Code:
fffff880`06bd9968 fffff800`0307d169 : 00000000`0000000a 00000000`06f77320 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`06bd9970 fffff800`0307bde0 : fffff880`06bd9c48 00000000`9041f000 00000000`00000001 00000000`10500000 : nt!KiBugCheckDispatch+0x69
fffff880`06bd9ab0 fffff880`058d9b3d : fffffa80`b31e2001 fffff880`00000000 fffffa80`08176000 fffff880`1f064a50 : nt!KiPageFault+0x260
fffff880`06bd9c40 fffffa80`b31e2001 : fffff880`00000000 fffffa80`08176000 fffff880`1f064a50 00000001`00000001 : igdkmd64+0x94b3d
fffff880`06bd9c48 fffff880`00000000 : fffffa80`08176000 fffff880`1f064a50 00000001`00000001 00000000`10011878 : 0xfffffa80`b31e2001
fffff880`06bd9c50 fffffa80`08176000 : fffff880`1f064a50 00000001`00000001 00000000`10011878 b21c4001`c92a3001 : 0xfffff880`00000000
fffff880`06bd9c58 fffff880`1f064a50 : 00000001`00000001 00000000`10011878 b21c4001`c92a3001 00000000`00000000 : 0xfffffa80`08176000
fffff880`06bd9c60 00000001`00000001 : 00000000`10011878 b21c4001`c92a3001 00000000`00000000 00000000`00000000 : 0xfffff880`1f064a50
fffff880`06bd9c68 00000000`10011878 : b21c4001`c92a3001 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00000001`00000001
fffff880`06bd9c70 b21c4001`c92a3001 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x10011878
fffff880`06bd9c78 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0xb21c4001`c92a3001
Our Intel display driver is calling into a page fault directly, therefore it was the cause of the crash as a page fault occurs when pageable/invalid memory is referenced and it's being brought back from disk to memory. When the IRQL is at 2 or above it isn't allowed ot reference pageable memory so we can't bring it back to memory from disk, we then get an infinite loop so we have no choice but to bugcheck.
I'll not go into detail about it as I'm here to solve the problem and it's late where I live at the moment.


Code:
2: kd> lmvm igdkmd64
start end module name
fffff880`05845000 fffff880`05cf3000 igdkmd64 T (no symbols)
Loaded symbol image file: igdkmd64.sys
Image path: \SystemRoot\system32\DRIVERS\igdkmd64.sys
Image name: igdkmd64.sys
Timestamp: Tue Aug 05 16:47:18 2014 (53E0FC86)
CheckSum: 00491E83
ImageSize: 004AE000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Our driver is actually up to date which is surprising for an issue like this.
I would suggest either seeing if there was a newer driver released in September, if not then try rolling back a version.

Read other 3 answers
RELEVANCY SCORE 47.2

Okay, this is the second time I've posted this, but it seems that the first message has disappeared.

I have Vista Home Premium on a Dell Inspiron E1705 (if that helps)...I CAN'T download or access any vital features because when Windows goes to ask my permission to continue, no window comes up! The screen darkens, but there is nothing there, and I have to go into task manager to regain access. I can't even do a system restore, or run things as an administrator (as suggested in previous postings) because they all seek permission for me to continue and I end up right back at the same dilemma...

Any ideas? I'm just stumped.
 

A:Can't install software on Vista, Part II

Read other 16 answers
RELEVANCY SCORE 47.2

I had a desktop with WinXP that my Lexmark X1270 all-in-one printer was hooked up to. I have since got rid of that pc and got a laptop with Vista (I know nobody likes it, but it appeared that that's the only choice now.) that I hooked my printer up to. While it does print, a part of it is missing. It just so happens to be a crucial part to me. The All-In-One center isn't on my pc (I've tried reinstalling a couple times and updating driver/software at Lexmark's site), that being the part where you can copy and scan things. Anyone able to help?
 

A:Part of printer's software missing?

Hi,

I like Vista for a start - I haven't had to do a fresh install once yet!

This may sound a cop out but have you asked Lexmark if this is a common issue? - you never know they may even help.

Another shot is, are you installing it as an administrator? i.e right-click on the setup.exe and Run as Administrator.
 

Read other 2 answers
RELEVANCY SCORE 47.2

I have BidDefender 2010 and MalwareBytes installed.

Both clean scans.

Do they search for bot activity, though?

If not, could someone recommend software specifically for this? Windows 7, 64-bit.

I tried R U Botted from TrendMicro, but that doesn't work on 64-bit.

A:Software to detect whether I am part of botnet...

You can use BotHunter : http://www.bothunter.net/Though I think BitDefender can effectively protect you from bots of all kinds.

Read other 1 answers
RELEVANCY SCORE 47.2

Hello Everyone,

If you are not familiar with my previous post, please see 'Problems while installing software (XP)' I really don't want to waste space by repeating all of that.

I'm grasping at straws right now, I have not been able to find anything even remotely like this, and there are no response to me earlier post, the one mentioned above.

Is it possible that there is an install that is still trying to work, in the background? I have kill the process on some of the installations that appear to hang. Could the installer be hung in the middle of some other installation?

If so, any ideas how I would kill it?

Thanks,

Jim

A:Problems while installing software (XP) Part 2

Just an FYI

I think (the jury is still out on this) I may have fixed the problem.

I was having a problem where I could not get the properties of a folder, not the file(s) but folder, would not display. Searching the web I found a solution (if you are interested in the solution look in this forum, for one of my posts, it was a problem with file folder properties. In a nutshell I had to get a service World Wide Web Publishing to start. Since fixing this, every one of my installs have completed as one would thin they should.

Read other 5 answers
RELEVANCY SCORE 47.2

TCP, FTP, UDP, SSL, HTTP,Telnet etc are all different protols.

Are all these protocols, part of browser software or OS ?

If more than one browser are installed on windows 7, does it mean that these protocols are installed more than once or they are part of Windows 7 and no matter how many browser softwares are installed, each browser uses protocol provided by the OS (windows 7, in this case) ?

thanks

A:Are protocols part of browser software ?

Hi, erm OK, think of it in terms of these are part of the OS not the browser.

Read other 2 answers
RELEVANCY SCORE 46.8

Windows Vista. I am trying to load a software application from a CD. When I click on the auto run I get the following error:

The program or feature
"\??\C:\USERS\............\DISK1\SETUP.EXE"
cannot start or run due to incompatibility with 64-bit versions of Windows. Please contact the software vendor to ask if a 64-bit Windows compatible version is available.

Do I really need to contact the vendor???? Is there any way around this?????
 

A:Software application download part deaux

when I wanted to buy a new laptop, I was told, I would have to buy all new software since Vista won't run most of the older programs, especially 64-bit need apparently different drivers.
I bought a used laptop with XP therefore. I like the programs I bought and can't afford to update constantly when Windows changes/

I guess you will have to contact the software vendor.
 

Read other 3 answers
RELEVANCY SCORE 46.8

What computer part is responsible for top speed so that a software program can be used at it's top speed?
use windows 8.1
 

Read other answers
RELEVANCY SCORE 46.8

My lexmark wifi printer wasnt working so I uninstalled the software thinking re-installing would solve the problem. Now, whenever I try to re-install the Lexmark software, as soon as it installs the uninstall option (part way through loading the application and I know this as it updates as installing) it starts to uninstall itself. I have tried countless driver sites but they all have the same issue. Is this a Windows 7 issue?

Read other answers
RELEVANCY SCORE 45.6

As the title says!
CRC errors at extraction.
Thanks in advance
 

A:Urgently need software which fixes multi-part RAR files (eg: .part01.rar)

whats the issue with it, give us more info or we cant help you
 

Read other 6 answers
RELEVANCY SCORE 45.6

good day.
I'm looking for a program or software that's pref. free that can grab or save parts of a movie or clip.. something simple and easy to use.

i'm planning on making a presentation and just wanted to join parts of tv clips and movie (dvd and avi format) i've purchased from the store.

thanks!
 

A:free software to grab or save part of a clip or movie

I'm sure there would be copyright issues involved here so I have to close this thread as we don't provide this type of assistance. Please refer to the forum rules.

http://www.techguy.org/rules.html
 

Read other 1 answers
RELEVANCY SCORE 43.2

Hi,
this is the second part of calvary I've been going through. The quick story is in link belove:
BSOD on restarting W7 64 bit and surfing in IE

But I will write it here in short, HP ProBook 4440s (altho it was 4540s before motherboard gone), now just when I've thought that I've passed BSOD's appeared while I was trying to use USB 3.0. Then few days after I gave up and went again installing everything from start, Windows 7 64 bit, step by step drivers and when it came to USB 3.0 and just after finish BSOD struck. I've thought that it is cause drivers from HP page are old, then I've tried uninstall them and install again, but same thing happened, same bug check, parameter.

Dump file:

A:BSOD USB 3.0 second part...

This time BSODs are indicating to USB3 drivers.

Code:
BugCheck 1000007E, {ffffffffc0000005, 0, fffff880031088e8, fffff88003108140}

Probably caused by : iusb3hub.sys ( iusb3hub+3bca1 )

Followup: MachineOwner
---------
And the driver is somehow old.

Code:
fffff880`0601e000 fffff880`0607d000 iusb3hub T (no symbols)
Loaded symbol image file: iusb3hub.sys
Image path: \SystemRoot\system32\DRIVERS\iusb3hub.sys
Image name: iusb3hub.sys
Timestamp: Fri Dec 21 20:10:46 2012 (50D474EE)
CheckSum: 00062CFB
ImageSize: 0005F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Search in HP for any possible updates. Search in Intel too.

For any further issue, post it following the Blue Screen of Death (BSOD) Posting Instructions and upload the list of all the third party drivers Using NirSoft DriverView :
Download and execute Driverview
View > Hide Microsoft Drivers
Edit > Select all
File > Save Selected Items
In the Save dialog, Set the path to desktop, Put "Driverview" in the name field, and save.
Zip the .txt file and upload it.

Read other 6 answers
RELEVANCY SCORE 43.2

Howdy,
System specs are in profile, jgriff dump plus perfmon attached. Various
BSOD happening once or twice a day, not the end of the world but until I learn to read the dump files I'd appreciate some help. Thanks to all, this is a wonderfully supportive forum.

A:BSOD part 3

Hi

STOP 0x000000DE: POOL_CORRUPTION_IN_FILE_AREA
Usual causes: Device driver, ?Memory

Your latest dump file blames ntkrnlmp.exe which is a Windows System file and is highly unlikely to be the cause.
All four dump files indicate device drivers as the first option, but your drivers look good.

What happened in Parts 1 & 2?

Did you run Memtest86+ at all?
Are your RAM settings correct?
If those check out I think Driver Verifier needs to be run until it crashes. Or have you done that?

Bugcheck Analysis
Code:
Loading Dump File [C:\DUMPS\badkarma11\020211-18891-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`03a1d000 PsLoadedModuleList = 0xfffff800`03c5ae50
Debug session time: Thu Feb 3 01:17:55.810 2011 (UTC + 0:00)
System Uptime: 0 days 2:07:50.792
Loading Kernel Symbols
...............................................................
................................................................
....................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* ... Read more

Read other 9 answers
RELEVANCY SCORE 43.2

I thought I was out of the woods and then the darned 'puter started spitting out BSODs again. Dump attached.

Did I mention that after 23 years of PC problems, I'm finally getting really, um, upset?

Phooey

A:BSOD, part 2

bump

Read other 9 answers
RELEVANCY SCORE 42.8

Built a new pc two days ago. Part list is Pick Parts, Build Your PC, Compare and Share - PCPartPicker
Getting error WHEA_Uncorrectable_Error. I've updated everything according to device manager. GPU driver and BIOS I installed and are up to date. Log says crash is caused by hal.dll. It happens randomly some time after I turn on the computer. It can happen in games or not in games but games seem to cause it to happen quickly. I am at default and have not overclocked anything yet. One thing I did notice is if i change the cpu voltage from it's auto of about 1.07 to a fixed 1.2 i get the BSOD just on windows startup and don't even have a chance to log in. I think this is the cpu but I want to be sure before I RMA it.

Speccy http://speccy.piriform.com/results/S...NZUGxMnYtbce0U

A:BSOD I think I've narrowed it down to the part

Hi

Please post a "Speccy" snapshot of your system which will give us in depth details of your system configuration.

Publish a Snapshot using Speccy - Internet Applications Mini-Guides

Make sure to post the web link "Speccy" displays.


Also please update your post according to Blue Screen of Death (BSOD) Posting Instructions

Read other 3 answers
RELEVANCY SCORE 42.8

OS - Windows 7
? x64
? What was original installed OS on system? Windows 7
? full retail version
? Age of system (hardware) - 2 1/2 years
? Age of OS installation - 1 year
? CPU - Q6600 G0
? Video Card - Sapphire 4870 1gb
? MotherBoard - Gigabyte P35-DS3L
? Power Supply - PC Power and Cooling 610 watt PS

PC had been running fine since following your instructions since the last thread I made:

http://www.techsupportforum.com/f217...od-473277.html

Ever since I started playing Starcraft 2 beta heavily, I started getting BSOD's. Any ideas what it could be? Thanks!

A:[SOLVED] BSOD: Part II

Hey.

If there is an update to your Kaspersky, I'd do so:


Code:
klif klif.sys Wed Nov 11 08:32:16
kl1 kl1.sys Tue Sep 01 07:29:21 2009
Your video card driver could use an update:


Code:
atikmpag atikmpag.sys Fri Dec 11 14:51:08 2009
http://game.amd.com/us-en/drivers_catalyst.aspx

Your Realtek network driver could use an update:

http://download.gigabyte.us/FileList...ek_8111_w7.exe

Please post a new crash dump if bsods persist after making these updates.

Read other 19 answers
RELEVANCY SCORE 42.8

Greetings, everyone:

The story so far:

Back in August I built a PC. O, la, la. It was working great, except for one small problem. If I ever shut the PC down for a few hours (or over night), it would never let me have a clean boot. It will load me to Windows, give me about 5 minutes, then the BSoD pops up. I resolve to send in various RMA requests.

On February, I decided to start the process again with the new RMA parts. I noticed the problem still existed. A work around this issue was simple; never shut down the PC. I just put the PC in sleep mode until I was ready to deal with it again. And yes, if I hit restart, the PC boots up normally.

Last night, I foolishly shut down my PC and lo and behold, the issue was back. This time around, I recall if my PC was running on 4 GIGs of memory and not it's original 6 GIGs. Boom. PC booted up just fine. I also tested each and every stick and they all booted up normally, so long as there was only 4 GIGS of memory (and not 6).

I don't know what could be the problem. The only thing I didn't replace was the ram, so I put in a RMA for it. Here are all the .dmp from today. Maybe I need to do something in BIOS?

System specs:

Windows 7 (x64). OEM installation. Hardware was purchased in 8/10. OS was reinstalled on 2/11. Intel core i5.

My motherboard is the GA-55-something-something.

A:BSoD Part 2: The Return

Bumpage.

Read other 1 answers
RELEVANCY SCORE 42.8

Hi

I have some strange issues with my computer

I have my computer since 20months, since I build it I have some BSODs while gaming or watching video.

Yesterday I bought new RAM which is official supported from the mainboard.
After I replaced my old RAM with it I had MORE Bluescreens (3 times while playing sc2, 1 time after some seconds of prime95)

The BSOD

Code:
BugCheck 124, {0, fffffa800686b028, fa000000, 400405}


Code:
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800686b028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000fa000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000400405, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------

BUGCHECK_STR: 0x124_GenuineIntel
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FA... Read more

A:[BSOD] Which Hardware part is it?

The STOP 0x124 error is primarily a hardware error, but it can also be a compatibility issue, a Windows issue, or a corrupted driver issues (not everyone agrees on the last possibility).

The Linux kernel message below is most appropriate:





Quote:
Nov 6 01:37:58 localhost kernel: [Hardware Error]: No human readable MCE decoding support on this CPU type.


So, we have to try different troubleshooting steps.

Run MemTest 86+ v4.10 overnight (at least 3 passes, more is better).
Run a hard drive diagnostic: HD Diagnostic (read the details at the link)

I wonder about the 550 watt PSU. In general most PSU's aren't up to what they say that they are rated for. And, you have a lot of extra equipment running (2 video cards and 8 hard drives). To test, remove 1 video card, and unplug most of the hard drives - then see if you still get the BSOD's.

Please provide the info in this post. It may show clues to other problems: http://www.sevenforums.com/crashes-d...tructions.html

More info on troubleshooting STOP 0x124 here: Stop 0x124 - what it means and what to try

Read other 9 answers
RELEVANCY SCORE 42.4

Does anyone know if a U530 motherboard (part DA0LZ9MB8G0) compatible with a U430P (part DA0LZ9MB8F0)? These look identical apart from 1 connector which appears to be in a different position. Many thanks in advance to anyone that can help! 

Read other answers
RELEVANCY SCORE 42.4

So I have a 1.5 terabite external hard drive and I want to be able to have it work with my Playstation 3. I also want it to work with my Toshiba Laptop which has Vista. Can anyone tell my how to format the partition so that it is Fat32 and the other is NTFS? on a side note if I instal UBuntu onto my PS3 do I need to use the fat32 for that also or will NTFS work with it? Thanks alot.

Read other answers
RELEVANCY SCORE 42.4

Hi,
I would like to be able to add a media card reader to my 3010MT Optiplex Dell PC system. I noticed some machines were equipped with one 5.25" bay sharing a slim optical drive and media card reader in one bay.

What options do I have, do I have to change out my current optical drive or can I buy a media card reader that will fit with correct caddy etc in my current available 5.25" space below my optical drive.?

Basically wanted part numbers for 19 in 1 mcr for my 3010MT. Also, would a generic 5.25 device work?

Thanks

Read other answers
RELEVANCY SCORE 42.4

Hello all

I re installed windows 7 home premium 64 bit and, it has been running for 4 days now without any issues (as opposed to BSOD every morning for thirty odd days on first booting up followed by no problems throughout the day.

I have now had two BSOD in quick succession, they appear to be random now and not at boot up

I have installed Microsoft Security essentials as recommended by the GURU's in here

Please help
The Components are as follows;
Mother Board: GIGABYTE S-Series H55M-S2H
CPU: Intel i5-750
Graphics Card: GIGABYTE HD 4350 (Radeon) 512MB DDR2 (I initially had a GeForce version of same card but after 1 week of BSOD, the retailer exchanged the Graphics Card
HDD: Western Digital 320Gig blue
2Gig of generic RAM

I am using my old NETGEAR DG834G v3 modem

attached is a zip containing the two mini dumps that have just occurred, I am hoping given that the system has now had a clean install and pretty much no other installs, the error/s may be obvious...




thankyou in advance

A:Homebuilt computer BSOD - Part 2

I suggest a memory test. Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder. Boot from the CD, and run at least 5 passes.

Also, please follow these instructions for enabling Driver Verifier: Using Driver Verifier to identify issues with Drivers


BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Sat May 15 19:23:04.271 2010 (GMT-4)
System Uptime: 0 days 0:02:52.723
BugCheck 50, {fffff82002513d40, 1, fffff8800130072f, 5}
Probably caused by : Ntfs.sys ( Ntfs!NtfsCommonClose+26f )
BUGCHECK_STR: 0x50
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Sat May 15 19:19:42.037 2010 (GMT-4)
System Uptime: 0 days 0:07:18.488
BugCheck 1A, {41790, fffffa80001e6ed0, ffff, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+33946 )
BUGCHECK_STR: 0x1a_41790
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????

Read other 1 answers
RELEVANCY SCORE 42.4

Tech Support Guy System Info Utility version1.0.0.2

OS Version: Microsoft Windows 7 Ultimate,Service Pack 1, 32 bit

Processor: Intel(R) Celeron(R) CPU 550 @2.00GHz, x64 Family 6 Model 22 Stepping 1

Processor Count: 1

RAM: 2038 Mb

Graphics Card: Mobile Intel(R) 965 ExpressChipset Family, 384 Mb

Hard Drives: C: Total - 59899 MB, Free - 8661MB; D: Total - 54469 MB, Free - 32758 MB;

Motherboard: FUJITSU SIEMENS, ESPRIMO MobileV5505

Antivirus: avast! Antivirus, Updated andEnabled


Greetings Techies!

Of late, I have been plagued with aplethora of problems with Windows 7 Ultimate.
First I was BSODed so many timesthat I was fit to be institutionaised (it said something like "KERNELINTERNAL PAGE ERROR").
I tried Safe Mode (with Networkingtoo) but to no avail ("Cannot load the remote access connection manager service/ Error 711..." and nosound).
Then succour came in the form ofchkdsk c:/r/f (or is it f/r?).
By this alone, I was able toeliminate 80% of the problems and I was happy...
But boy, was I living in cloudcuckoo land?
The next jolt is Windows Update. Itwon't.
Did I hear KB947821 (System UpdateReadiness Tool)?
Been there, done that. NADA.
Now the love missive is: Error800B0100 (while trying to instal update KB2763523).
Now, after the chkdsk scan, Ihaven't had a single BSOD but this has created serious problems on my system: Windows doesn't update(KB2763523 failed 22 times); access to Youtube is intermittent on IE 9 (but no problem... Read more

A:Solved: Till BSOD Do Us Part

Read other 7 answers
RELEVANCY SCORE 42

I have a wireless modem connected to my main desktop in a downstairs room of my house (where my Comcast internet connection is located). The wireless connectivity is fine throughout the house for the most part.

However, if I want to connect to a slingbox to my tv upstairs which requires a hard wired ethernet connection, what are my options?

I will have no permanent computer upstairs.

Can I configure an access point for this or will I have to look at one of Cicso Power type options for this type of needed connection?
 

A:Wireless router in part of house, but need a hardwired connection in another part

Read other 6 answers
RELEVANCY SCORE 42

Im creating a normal document in Microsoft Word and I need to have one section of information automatically copied and pasted to another section of the document... and like update when any info is changed. Basically its a notes section on each page of the document that I want copied to a summary section without deleting the original notes. Ive tried understanding forms and macros but Imnot even sure thats what I should be trying. Can anyone help?
 

A:Can Microsoft Word auto copy one part of a doc & paste it to another part of same doc

Read other 16 answers
RELEVANCY SCORE 42

Hi, i looked this over on google and did not find the info i want.

I have a desktop PC.
For windows 7; after a bsod, is there a 3rd party tool allowing to bring the OS to the exact same state with the same files open etc before the crash happened?
Like when using hibernate.

I'm getting bsod's followed by a memory dump quite often or when invoking certain SW. Its very annoying when involuntarily i loose my unsaved files and tasks i was doing.
Pls shed your knowledge on this.

A:Bringing desktop to same mem state after bsod. 3rd part SW?

Hi JohnAtanasoff,

It is important to find out the root cause behind the 'Blue screen'; once treated, you may be able to prevent errors in the system. Not sure if a 'standalone software' is a potential remedy for various 'Blue screen errors'.

Please follow the steps in the following tutorial to capture and share the 'crash dump' details: Blue Screen of Death (BSOD) Posting Instructions

As mentioned in the tutorial, please select 'Grab All' to capture all pertinent information (as in the reference image below)



These details are vitally important to understand the reason of 'errors/crashes' in the system.
Do reply with the information; would be glad to assist.

Read other 7 answers
RELEVANCY SCORE 42

boopme says -  <<OK, yes start a new topic in the other forum again. Mention we feel it's clean here and run a new Minitoolbox and post that log.>>
 
I am not sure if this pc is fixed or if I am going to have more intermittent problems. I saw that there were some app errors listed.
Thanks for any advice you can give.
 
MiniToolBox by Farbar  Version: 30-11-2014
Ran by . (administrator) on 10-03-2015 at 22:16:22
Running from "D:\Users .\Users ."
Microsoft Windows 7 Home Premium  Service Pack 1 (X64)
Boot Mode: Normal
***************************************************************************
========================= Event log errors: ===============================
Application errors:
==================
Error: (03/09/2015 05:05:11 PM) (Source: SideBySide) (User: )
Description: Activation context generation failed for "C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest1".Error in manifest or policy file "C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest2" on line C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest3.
A component version required by the application conflicts with another component version already active.
Conflicting components are:.
Component 1: C:\Windows\WinSxS\manifests\amd64_microsoft.w... Read more

A:BSOD 64bit style! - Part 2 - Cleaned

Please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis
 

Read other 8 answers
RELEVANCY SCORE 42

BSOD randomly appears in different programs

alright here is the part 1 of my problem before i used driver verifier,i used and it appeared few BSOD's with different addresses so here is the BSOD log

Read other answers
RELEVANCY SCORE 41.6

My HP Notebook - 15-r264dx TouchSmart (ENERGY STAR) - Will not power on. After dissasembling it, I found that the connection between the small board containing the power button and the 4 wire ribbon cable that leads back to the motherboard was broken. I tried to fix it by pressing the four wires onto their contacts, and pressing the power button then. That did not work, probably indicating that once the connection is broken, it cannot be put back. So I either need to find a fix for that, or purchase a replacement part. The part is: TMT YA-4A1  54V-0  E114139 (It would need to be both the power button chip and the ribbon cable, connected.) ps. The computer works aside from the power button malfunction, as I touched two of the contact wires in the ribbon cable together and it turned on. Also, I do not know whether it is a 64 bit or 32 bit, but I doubt that will have any weight on the solution.

A:Where can I purchase a replacement part/repair existing part...

Hi, Vendors now only sell the whole part. Please check the following list which shows all availabe parts for your machine:     http://partsurfer.hp.com/Search.aspx?SearchText=L0T71UA If you only needed a small piece, you may have to buy whole part or working out part for that piece and search on eBay. Regards.

Read other 1 answers
RELEVANCY SCORE 41.6

This is my first time posting here although I am a frequent "lurker". This forum has tons and tons of valuable information and it really helps me a lot without actually having to post or ask questions.

Now to the real reason I am posting. I have receiving frequent BSOD's. It will go 2-3 days without them and then BSOD 4-5 times in the middle of the night or even while I simply browsing the website. I have been battling with this issue for months and over the passed couple of months I have replaced nearly EVERY part in my computer.

The BSOD that I am recieving are a variety of errors. 0x000000A, 0x00000109.

I am also receiving an error in my logs:
The IOCBIOS service failed to start due to the following error:
The system cannot find the path specified.

I researched this and found some people think its a virus. This is a fresh brand new install of windows with close to nothing installed. After I formated and did a clean install it didnt BSOD for days and then one night it BSOD 4-5 times in the middle of the night.

Parts replaced:
Motherboard
Ram (was 4GB now 8GB switch from PNY to Corsair)
PSU
HDD
Video card

I have not replaced the actual CPU itself..

I have gone out to Intel's support site and downloaded the latest drivers for the Chipset and LAN thinking this may have been the issue but yet I am still receiving BSOD.

Computer Spec's as follows:

Intel DP45SG Extreme Motherboard
Q9300 Quad Core
8GB memory (CMX8GX3M4B1333C9)
160GB WD 10,000RPM drive... Read more

A:Misc BSOD, replaced every part in my computer - Need some assistance!

Quote:
The IOCBIOS service failed to start due to the following error:
The system cannot find the path specified.


That's Intel(R) Extreme Tuning Utility Performance Tuning service that can't start. Path not found, strange. In combination with Stop 0x109.

You have upgraded hardware and you're getting crashes after system reinstall.


Set all hardware clocks as recommended by the manufacturer. Attach:

- CPU-Z MEMORY and CPU tabs snips
- RAMMON HTML report
- Drivers List by Nirsot DriverView
- Uninstall Intel(R) Extreme Tuning Utility Performance Tuning

Read other 6 answers
RELEVANCY SCORE 41.6

im also having the same issue and followed the instructions here: http://www.bleepingcomputer.com/forums/topic395047.html

I ran a scan and the output is below. I'd be really grateful if you could let me know what to do next!

thanks a million!!


Scan result of Farbars's Recovery Tool (FRST written by farbar) Version 2.0.8
Ran by SYSTEM at 2011-05-28 07:11:37
Running from G:\
Windows 7 Home Premium (X64) OS Language: English(US)
The current controlset is ControlSet001

========================== Registry ==========================

HKLM\...\Run: [IAAnotif] C:\Program Files (x86)\Intel\Intel Matrix Storage Manager\iaanotif.exe (Intel Corporation)[186904 2009-10-13]
HKLM\...\Run: [RtHDVCpl] C:\Program Files\Realtek\Audio\HDA\RAVCpl64.exe -s (Realtek Semiconductor)[11106408 2011-01-07]
HKLM\...\Run: [SynTPEnh] %ProgramFiles%\Synaptics\SynTP\SynTPEnh.exe (Synaptics Incorporated)[1825064 2009-11-11]
HKLM\...\Run: [SunJavaUpdateSched] "C:\Program Files\Java\jre6\bin\jusched.exe" (Sun Microsystems, Inc.)[171520 2010-03-06]
HKLM\...\Run: [CanonMyPrinter] C:\Program Files\Canon\MyPrinter\BJMyPrt.exe /logon (CANON INC.)[2184520 2009-07-27]
HKLM\...\Run: [CanonSolutionMenu] C:\Program Files (x86)\Canon\SolutionMenu\CNSLMAIN.exe /logon (CANON INC.)[767312 2009... Read more

A:(part 3)-Windows 7 x64 Will Not Start - Startup Repair - ci.dll - BSOD

sorry i seem to be having trouble posting more of the output thread???

Read other 5 answers
RELEVANCY SCORE 41.6

I'm having the same issue and followed the instructions here: http://www.bleepingcomputer.com/forums/topic395047.html

I ran a scan and the output is below. I'm not sure if I need to run something specific to my computer or not in order to fix this issue. I tried just hitting the fix button after the scan, but it didn't resolve anything.
Scan result of Farbars's Recovery Tool (FRST written by farbar) Version 2.0.8
Ran by SYSTEM at 2011-05-27 22:14:49
Running from F:\
Windows 7 Ultimate (X64) OS Language: English(US)
The current controlset is ControlSet001

========================== Registry ==========================

HKLM\...\Run: [SoundMax] "C:\Program Files (x86)\Analog Devices\SoundMAX\SoundMAX.exe" /tray (Analog Devices, Inc.)[3866624 2009-05-18]
HKLM\...\Run: [itype] "C:\Program Files\Microsoft IntelliType Pro\itype.exe" (Microsoft Corporation)[2306448 2010-07-21]
HKLM\...\Run: [BCSSync] "C:\Program Files\Microsoft Office\Office14\BCSSync.exe" /DelayServices (Microsoft Corporation)[112512 2010-01-21]
HKLM-x32\...\Run: [AdobeCS4ServiceManager] "C:\Program Files (x86)\Common Files\Adobe\CS4ServiceManager\CS4ServiceManager.exe" -launchedbylogin (Adobe Systems Incorporated)[611712 2008-08-14]
HKLM-x32\...\Run: [Adobe_ID0ENQBO] C:\PROGRA~2\COMMON~1\Adobe\AD... Read more

A:(part 2) - Windows 7 x64 Will Not Start - Startup Repair - ci.dll - BSOD

Hi 3sixty,Welcome to Bleeping computer. I will assist you with your issue.Open notepad. Please copy the contents of the code box below. To do this highlight the contents of the box and right click on it. Paste this into the open notepad. Save it on the flashdrive as fixlist.txt
cmd: bootrec /FixMbr
cmd: bcdedit /set {default} winpe no
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating systemNow please enter System Recovery Options.Run FRST and press the Fix button just once and wait.The tool will make a log on the flashdrive (Fixlog.txt) please post it to your reply.Also reboot the computer and tell me how it went. after booting normally please use no programs and don't run anything until we check the computer.

Read other 7 answers
RELEVANCY SCORE 41.2

I am using Excel 2010. In cell B26, I want it to read "The total is ..", followed by a variable picked up from cell F4. The variable has to be included in cell B26.

It's annoying, because 10 or 15 years ago I knew how to do this, but now I can't remember. I tried searching office.com help, but without obvious search terms, it's frustrating. Can someone help?
 

A:Part text, part variable in a cell

Read other 7 answers
RELEVANCY SCORE 41.2

A Dell machine I have is having power issues, I came across this thread: http://forums.techguy.org/hardware/818967-dell-xps-410-shutdown-startup.html#post6637614

Further down in that thread, I saw this post which explains I need to replace a piece: http://forums.techguy.org/6637614-post10.html

I Google'd around for that part # but could not find it to buy. Any ideas?
 

A:Dell sold defective part, where can I buy the part?

Read other 7 answers
RELEVANCY SCORE 41.2

Hello folks,
At the risk of sounding thick.
I have a LaCie 500gb formatted with Fat32, this was for use with my PC AND PS3. I have about 150gb used. I now want to back up my pc to make some hardware changes but i cant back this up to my EHD because its formated to fat32. I don't have enough room on my HD to save the data from my EHD, format the EHD to ntfs and save it back.
Is it possible to format an EHD to part fat32 and part ntfs?
Or is my only alternative another EHD?
Thanks for any help
Paul
 

Read other answers
RELEVANCY SCORE 41.2

Hi there, I've been searching and searching, and couldn't find any information on this. What is the 512 GB Samsung part that I receive, when I order the Lenovo part number "4XB0N10300" for my P50? Is it PM961? If not, what would be the correct Lenovo part number to go by in order to obtain the PM961? Thank you in advance!

Read other answers
RELEVANCY SCORE 41.2

i have a windows xp home o/s on a dell dimension 8200
last week i casually deleted my video driver instead of a similarly named program which i did not want. for several days i could not see anything on my monitor. while i was out getting the startup discs from my brother in law who has the same computer (system and all) because my house ate my set, my sister was trying to "help" fix it by putting in the emergency boot and repair disks i made for a different computer... a dell 4300 with ME o/s... and when i got back... well, lets just say i was unhappy.

the computer refused to acknowledge that i had a hard drive so i popped in the o/s cd from dell and added another partition so now i can see and use my computer.

now, is there any way i can get my other information back? when i open computer management, and click on disk management i see two partitions on Disk 0 :

( )
37.27 GB FAT
Healthy (EISA Configuration)

(C: )
37.25 GB NTFS
Healthy (System)

if i make the ( ) the active partition it goes back to being unable to load (but still there)

any thoughts on this situation (besides what i can do to my sister) would be very much appreciated.
 

A:cannot access part of my harddrive (the part with all my files)

try Partition magic or Disk magic. You may be able to re-activate your partition with those. Otherwise you'll need a program to recover your files. I just used File Scavanger ($40) to recover files from a hard drive that got trashed from a major system failure. I regained 80% of my files, fortunately about 95% of my most important ones. Most of the other programs are $90 & up. Good luck and make your sister pay for these programs
 

Read other 1 answers
RELEVANCY SCORE 40.8

This netbook has just run out of 12 month warranty (by 2 weeks) and has failed on Windows 7 with a blue screen error shortly after logging in.

It won't reinstall from the recovery partition (it blue screens when installing the OS) and using the test facility from the recovery partition to do a memory test doesn't indicate an error with the netbook's memory.

It has always run fairly hot, and I have only just seen the service announcement about upgrading the BIOS to provide a warning about overheating.

I am wondering whether the overheating has damaged the netbook and now the only use it has is as a paperweight, or whether I should spend money to replace the hard-disk and try to reinstall the OS.

I must admit that I would expect a better service life from a Toshiba product than just 380-odd days of use and I am considering what action is open to me under consumer law.

Anyone else had a similar problem?

A:Satellite T130 (Part PST3AE) blue screen BSOD

Hi

I?ve got two Toshiba notebooks and never had any problems.
Of course notebook can start always to malfunction? this is nothing unusual because hardware can damage suddenly.
Therefore the notebook is covered by warranty.
Standard warranty is valid for 12 month but if you register the notebook on the Toshiba page you would get additional one year.
Nevertheless in my country the retailer warranty covers the products (no matter what products it is) always 24 month long.

Back to your issue; BSOD is a result of serious software or hardware issue.
Higher temperature can affect the notebook?s parts like RAM modules for example and this might cause BSOD.
This happened with my first non-Toshiba notebook which I bought 10 years ago.

I assume you are not sure if it?s related to software or hardware? therefore I recommend recovering the notebook using the HDD recovery or the recovery disk.
If the BSOD would still happen even if the notebook has been recovered, then you should check the cooling modules. Clean it using compressed air spray. The clogged fans might cause higher temperature which leads to BSOD.
If this does not help, then the notebook technician should check the hardware.

Read other 2 answers
RELEVANCY SCORE 39.6

I recently reformatted my main (of 2) partition (holding Windows XP home and program files, the C drive) due to a virus. All my files were on a 2nd partition (D) that wasn't formatted in order to save my files. After reinstalling WinXP, I then moved my files to the OS partition, and formatted the 2nd partition as well, trying to give my whole drive a good clean. Unfortunately, when rebooting, my machine wouldn't start up because "NTLDR file is missing".

I realized it was looking for NTLDR on the D: drive (Files drive) and thus solved the problem by using my XP setup CD to copy NTLDR, ntdetect.com, and Boot.ini on to the D: drive. Then I ran Bootcfg from the XP setup CD recovery consol to set Boot.ini to point to my windows XP installation on the C: drive. So, now it starts up fine, but clearly my computer is recognizing the D: partition as the "Active" partition, when the C: partition really should be it!

So, I would like to get things back to normal but I can't figure out how to reset which partition is considered "Active". When I use PartitionMagic, the option to "Set as Active..." my C: partition is unavailable, in part, I suspect, because for some reason my OS partition (with WinXP on it, C is set up as a "Logical" partition, and not a "Primary" partition. Furthermore, there is this unexplained "Extended" partition w/ no drive letter that is exactly the same size the C: drive. I read th... Read more

A:Solved: Complicated Partition Q's: Setting "Active" part.; Boot not same as System part.; etc

Read other 14 answers
RELEVANCY SCORE 39.6

Is this the correct picture?  Google is showing me a simpler adapter without the USB portion (i.e. passive adapter).  I wish to be able to use this to connect my dual-link DVI only monitor that is 2560x1440 to my laptop (radeon 8750m) which only has VGA or display port.  Is this the correct adapter?  The description does mention 2560x1600, but I'm a little skeptical due to the differring picture results from my Google search.

Read other answers
RELEVANCY SCORE 39.6

About 6 days ago my Ethernet cable and some of my USB ports stopped working so i called ASUS (my motherboard manufacturer) and the technition told me that the problem may be my powersupply. Sure enough when i bought a new one it worked. But what I also have noticed is that now other things on my computer are dieing. My DVD drive can not read most disks, the only one i was able to get it to read was Minority Report, and just yesterday windows explorer stopped working on my computer even after a restart. i looked online and found that this could be because windows cant find hardware that should be there. i dont know what to do. im getting the vista disk from a friend today to reinstall but i have a feeling that thats not the problem.

powersupply i got:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817159040
 

A:HELP! my computer is dieing part by part.

well..the new install will sort out one route of problems...wen diagnosing a problem you need to cover all possible routes that a problem could stem from...so..the software is one of those routes...get it fresh installed and patched all up to date..then give it a try...
 

Read other 1 answers
RELEVANCY SCORE 38.4

Alright here is my issue as best as I can explain it. I have two drives, one with a system partition one with my boot. The one with the boot is the drive I want to use as my primary. I want to format the drive with the system partition.

How can I move the sys partition to the boot drive so that I can format the other since right now disk management will not let me format the drive with the sys partition.

Picture for more info
Disk 3/Vol6 is what I want to save and align sys/boot too. Disk 4/Vol7 is what I want to format.
Thanks a lot!

A:System Part and Boot Part Diff Drives. Want to Align SYS and BOOT

On second thought- use easybcd - it has a very easy change boot drive option.

Read other 7 answers
RELEVANCY SCORE 37.2

Friend/client's laptop.
Dell Inspiron 1525.
Windows 7 Home basic.
x64 (I believe - unconfirmed).
From what my mate explains he got fooled by a spoof website claiming he needed to "defragment" his drive. He obviously followed a few too many prompts and got infected.

The problem I now have is ever time we turn the lappy on it goes through the initial booting of windows then gets to the "Welcome" screen (right before it would usually load the desktop). It then pops up a BSOD, does it's dump then reboots. If left alone it will do this indefinitely.

Loading in safe mode has the same result.

The BSOD error code is:
Code:
STOP: 0x0000008E (0xC0000005, 0x820836B3, 0xAE19FB24, 0x00000000)
and can be seen here:
http://i1030.photobucket.com/albums/y363/jamienprice/2011-01-03_19-04-43_956_Beechboro.jpg

I don't care to repair the Windows partition particularly. I just want to recover some important files before formatting.

I tried Hiren's Boot CD and an XP MiniPE live CD to try copying the files to an external HDD but the C:\ drive didn't even show up in either application.

From my research the error code points to a corrupt MBR. So I got into repair mode with my Win7 CD and tried:
Code:
X:\Sources bootsext.exe /fixmbr

as well as

Bootrec.exe /FixMbr
and Bootrec.exe /FixBoot
Neither helped.

Any suggestions?

Thanks heaps guys.
 

A:Get's to the "Welcome" part of the boot then BSOD. No safe mode either

Read other 12 answers
RELEVANCY SCORE 37.2

Friend/client's laptop.
Dell Inspiron 1525.
Windows 7 Home basic.
x64 (I believe - unconfirmed).
From what my mate explains he got fooled by a spoof website claiming he needed to "defragment" his drive. He obviously followed a few too many prompts and got infected.

The problem I now have is ever time we turn the lappy on it goes through the initial booting of windows then gets to the "Welcome" screen (right before it would usually load the desktop). It then pops up a BSOD, does it's dump then reboots. If left alone it will do this indefinitely.

Loading in safe mode has the same result.

The BSOD error code is:


Code:
STOP: 0x0000008E (0xC0000005, 0x820836B3, 0xAE19FB24, 0x00000000)
and can be seen here:
http://i1030.photobucket.com/albums/..._Beechboro.jpg

I don't care to repair the Windows partition particularly. I just want to recover some important files before formatting.

I tried Hiren's Boot CD and an XP MiniPE live CD to try copying the files to an external HDD but the C:\ drive didn't even show up in either application.

From my research the error code points to a corrupt MBR. So I got into repair mode with my Win7 CD and tried:


Code:
X:\Sources bootsext.exe /fixmbr

as well as

Bootrec.exe /FixMbr
and Bootrec.exe /FixBoot
Neither helped.

Any suggestions?

Thanks heaps guys.

A:Get's to the "Welcome" part of the boot then BSOD. No safe mode either

What I don't understand is if the boot record on the HDD is that corrupt that the HDD isn't recognizable in a live CD environment how come it can find enough of the crucial Windows files to boot the OS to the point where it's about to load the desktop?

Read other 2 answers
RELEVANCY SCORE 33.6

Hello I would like to replace a keyboard of lenovo 20j1 -004UMZ. The Problem is the replacement keyboard (same FRU) got a longer cable (the other one is correct). That's why I can't close the keyboard. There is no space for the longer cable. (Picutre)Any Ideas? Thank you very much, regards Lukas

Read other answers
RELEVANCY SCORE 33.2

I'm having a BSOD after about 10-30 seconds after login on normal mode.
Code:
0x0000008E (0xC0000005, 0xB94E8C7C, 0xAC81E7E8, 0x00000000)
So when I boot I go to task manager quickly and end 'MOM.exe' which has something to do with ATI I believe. So now my PC works fine and does not fail.

So basically I think the system failure has something to do with ATI Software.

Also when I go and convert my Minidump file into a debug text file 'CCC.exe' shows up, which also has something to do with ATI Catalyst Control Centre.

Part of Minidump:
Code:
CUSTOMER_CRASH_COUNT: 10

DEFAULT_BUCKET_ID: COMMON_SYSTEM_FAULT

BUGCHECK_STR: 0x8E

PROCESS_NAME: CCC.exe

LAST_CONTROL_TRANSFER: from 805c5dce to ba2d9c7c

STACK_TEXT:
WARNING: Frame IP not in any known module. Following frames may be wrong.
ac951be0 805c5dce 8a209208 00000fe4 ac951c20 0xba2d9c7c
ac951c00 805a64e3 8a209208 00000fe4 ac951c20 nt!PsCallImageNotifyRoutines+0x36
ac951c48 805a6fd0 8aa06968 53a00000 ac951d18 nt!MiMapViewOfImageSection+0x4c1
ac951ca4 805a7395 00000018 8b5b2110 ac951d18 nt!MmMapViewOfSection+0x13c
ac951d34 8053d428 000007d0 ffffffff 0429a720 nt!NtMapViewOfSection+0x2bd
ac951d34 7c90eb94 000007d0 ffffffff 0429a720 nt!KiFastCallEntry+0xf8
0429a70c 00000000 00000000 00000000 00000000 0x7c90eb94


STACK_COMMAND: kb

FOLLOWUP_IP:
nt!PsCallImageNotifyRoutines+36
805c5dce 56 push esi

SYMBOL_STACK_INDEX: 1

SYMBOL_NAME: nt!PsCallImageN... Read more

Read other answers