Over 1 million tech questions and answers.

Printing over a terminal server.

Q: Printing over a terminal server.

Can any1 maybe help me to get this right.

I work for a company that has branches all over the show and the outside branches connect to a terminal server to work on an access application. how would i be able to get them to print to their local machine, and to make it worse some of the printers are network and some are just connected to a local machine of the branch.

Ive searched all over the web but to no prevail. and its realy starting to become a bother.

PLEAS help if any1 can.

OH! and have a good 1

RELEVANCY SCORE 200
Preferred Solution: Printing over a terminal server.

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Printing over a terminal server.

you'll need to install all the individual print drivers:

Printers and Faxes --> File --> Server Properties --> Drivers

If you want to avoid installing a hundred print drivers, you can install something like PrimoPDF (can get it from download.com for free) on the client machine and on the terminal server. If they print to PrimoPDF when in terminal services, it will bring it up in a PDF file on their end, and they can then print to whatever printers are attached to their machine.

You will also need to follow the article at the following address to make sure your printers can map to the terminal server:
http://support.microsoft.com/kb/302361

Read other 2 answers
RELEVANCY SCORE 78.4

Problem : I am running W2k Terminal Server, User logs in and automatically starts program they are using. When they go to print I get an access violation, and refuses to print. Printer is a HP 4050 that is networked to client side NT4 server. Client is using Win98, and terminal server client.

When I run these same clients in a Terminal server windowed enviroment, and start my program from the desktop, and try and print, I have no problem printing = no Acces Violation.

any suggestions would be welcome.
 

A:Terminal server printing

Read other 7 answers
RELEVANCY SCORE 77.6

I work from home using remote desktop to log in to my terminal server at the office. at home i have a local printer. Hp Laserjet 3055 all in one connected with USB cable. This works fine locally. I have added the printer to the terminal server. I rebooted my local computer then logged on to the terminal server using remote desktop and cannot print to my local printer. There is another remote user who prints fine. I checked that my local resources for printer is checked off.
 

Read other answers
RELEVANCY SCORE 77.6

Hi All!

I searched for anything similar to the problem I am having, to no avail. Please excuse the noob if this is posted in the wrong area..

I am experiencing issues printing in Terminal Server and locally for that fact. Whenever I try to print a job, I have to select my default printer all over again. I have set the default, outside of TS, to no avail. It seems that TS is randomly selecting a different printer whenever I try to print. If you need more info, I'll be here awhile.. (Hey, that's 311!!)

Thanks in advance to all!

Read other answers
RELEVANCY SCORE 77.6

I have been setting up printers on a network to print watermarks in terminal server. I have successfully set up multiple win XP systems but there is one that is giving me fits. It has the watermark tab enabled locally but in TS it is dimmed. All of the PCs and the Terminal Server have the same drivers. Does anyone have any ideas as to why this one system is reacting differently?
 

Read other answers
RELEVANCY SCORE 76.8

I am running NT Version 4.0 Terminal Server and am having difficulty getting the client set up to allow for printing at their location. Here's what I've done so far.

- The printer I'm trying to get to is set up as a shared device on a PC in a remote location. It's an HP 895C and I've installed the printer on the Server. I have no problem printing from there.

- When I start up the Client, as either Administrator or a Client, the printer just spools the document. The document appears in the printer dialogue box on the client's local machine, but never finishes spooling.

- Per the help on Terminal Server, I used "net use lpt2 \\computername\sharename" to capture the printer. After I did this, I was able to do a standard "dir > lpt2" from the DOS prompt, but haven't been able to get a Windows application to print to the printer.

- I've tried various combinations of spool settings, print processing, drivers, etc.

Any help you're able to provide will be appreciated.

Connie
 

A:{Solved} - NT Terminal Server Edition & Printing

Read other 10 answers
RELEVANCY SCORE 76.8

Hello all and thank you for reading my post. I have a user at home who access' our terminal server and wants to print to her home printer. I was able to find the drivers, add it as a local printer, and assign it the correct TS Port. This works great until she logs off the TS and back on. When this happens, the TS Port for her printer changes. I do not want to give her admin rights so that she can go in and change the port everytime, and this would also be an inconvinience to the user. So I'm hoping there is a way to set the printer TS Port to static, so it remains the same everytime. Or any other workarounds would be helpful!

Thanks,

-Dlaw

Edit:
Kodak Easy Share 5500
Windows Server 2003 R2 SP2
 

A:Troubles printing local from terminal server

Anyone?
 

Read other 2 answers
RELEVANCY SCORE 76.8

I have the following:

Terminal Server 4.0 running an application called CLASS

100 seperate users are located at a remote sites, connecting via a WAN Router.
Users running Terminal client. Connects to Terminal Server, and runs
class. Each wants to print to a local printer from Class.

How to configure Terminal Server so that I can print from the terminal
server to my clients' printer, without mapping the printer at the Terminal
Server. In other words, I want to print to my clients local printer.
 

Read other answers
RELEVANCY SCORE 76

I'm dumbfounded...

My client computer is a Win 98 SE system with an Epson C40UX USB printer. The server is a Windows 2000 Server with SP2 installed. I have a connection established between the client and the server using Terminal Services. The Win98 machine is successfully communicating with the Windows server. But, I am unable to print a document to the Epson printer while inside Terminal Server. I am beginning to think it has something to do with the USB connection. Is there a way to fix this? Do you have any thoughts on this matter?
John
 

A:Printing to a local printer inside Terminal Server

The printer driver will have to be installed on the server.

Here is a link to a document you can download that tells more about it.

http://www.microsoft.com/windows2000/technologies/fileandprint/print/terminalsrvcs.asp
 

Read other 1 answers
RELEVANCY SCORE 76

Hi,



Did anyone else have issues with terminal server printing after the critical fix KB 4534309 was applied?   Applications would freeze when opening (Word and Outlook), with Word saying
"connecting to printer", but if we change to another default printer it'll open okay.  After logging off and back on, the same issue recurs.



Removing KB4534309 fixed the issue we were having.



Could someone confirm the same problem?  It could be our customer's server, as they were using an old version of Office (2010) on 2012R2 terminal servers.

Read other answers
RELEVANCY SCORE 59.2

Hiya

By adding an additional server to your Microsoft® Windows® Small Business Server 2003 network, you can enable Terminal Server. Using Terminal Server, you can host your users' desktops. This can save your organization money by allowing you to extend the life of your desktop hardware.
After you have installed Windows Small Business Server 2003 and have completed the To Do List, you can join an additional server to your network and configure it as a terminal server.

System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Word or Word Viewer
http://www.microsoft.com/downloads/...45-57ef-43eb-802f-f274fd937400&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 59.2

I don't know if this is help for our server or Excel I am looking for. Here is the issue...

Whenever one lady is logged into a session on our server, she opens a word document that has an Excel worksheet embedded in it. The second she tries to click on the Excel worksheet, Dr. Watson makes a call and hits me with the following message...

Error in Excel.exe
Access Violation (0xC0000005), Address: 0x304632a3



When she tries to just open the Excel program, she gets this error:

Compile Error in Hidden Module: ThisWorkBook

This only happens to her, should I make a new profile on the server for her? Is there something in Excel I can do? I am so lost and MS Knowledge base has been of no help to me.
 

A:Excel Shutting Down on Windows NT Server (Terminal Server, Citrix Metaframe)

Try this, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q169718

And this, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q172211

Or look here for more, http://search.support.microsoft.com...Type=ALL&maxResults=150&Titles=false&numDays=
 

Read other 2 answers
RELEVANCY SCORE 59.2

Cannot access windows updates, any admin tools, av websites., cannot run spybot, internet explorer giving security settings warning, cannot change any of the settings.

HJT log file:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:08:50 PM, on 6/15/2011
Platform: Windows 2003 SP2 (WinNT 5.02.3790)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\Documents and Settings\administrator.#domain#\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Trend Micro\AMSP\coreServiceShell.exe
C:\Program Files\Trend Micro\UniClient\UiFrmWrk\uiWatchDog.exe
C:\Program Files\Trend Micro\AMSP\coreFrameworkHost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Trend Micro\Client Server Security Agent\tmlisten.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\rdpclip.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Broadc... Read more

A:Server 2003 Terminal Server cannot access admin tools

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you... Read more

Read other 2 answers
RELEVANCY SCORE 59.2

Hiya

Microsoft Windows Terminal Server lets users run Windows®-based applications on a remote computer running one of the Windows Server 2003 family of operating systems. This white paper contains testing methodologies, results, analysis, and sizing guidelines for Windows Server 2003 Terminal Server. Hewlett Packard working in cooperation with Microsoft to perform the initial sizing tests and data collection in HP labs. Microsoft performed the final round of testing and analysis collection using Hewlett Packard equipment. The tests were performed using Windows Server 2003, Enterprise Edition, build 3790.
System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Word
http://www.microsoft.com/downloads/...63-7c42-4372-ab37-d8c8987a71da&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 58.4

I'm looking at setting up windows 2003 terminal servers all over the place to replace the awful thing people are currently doing here - vncing servers with one small shared password among everyone <holding my hands over my ears for the backlash>. Don't blame me, it's another awful legacy I have to get rid of...

1. I've got to set up a Terminal Server Licensing server and was thinking about putting this on my second domain controller. I was wondering what would happen in this server dies, though. Is there some way of having resilience in this scenario? Perhaps a second Licensing server or something, the way you have 2 or more Domain Controllers?

2. Also, I know that Windows XP has an RDP client, I've used before on many occasions, but what about all the Windows 2000 clients that I still have out there. What should I do for them to access the new Terminal Servers?
 

A:Terminal Server license server(s)? RDP client for Windows2K?

I'm not 100% sure on #1, but I believe that the TS licensing becomes integrated into the AD, so if one DC goes down, the other one will be able to check licensing. On another note, if you are using the TS for administration only, I don't believe you needs the TS Licensing to be installed.

For #2, you can download the latest version of the RDP client from MS's website. It should also be available through Windows Updates, although I think Win2K isn't supported any longer, other than Critical Updates.
 

Read other 1 answers
RELEVANCY SCORE 58.4

I've been having a lot of trouble with this and I hope someone here can shed some light on this for me...It's driving me crazy! Thanks in advance for any suggestions!

We're using Windows 2000 Server in Terminal Server/Application Server mode. the Clients are Win98 boxes. Every so often, (once or so every 2 to 3 months) all of a sudden, All the Printers will disappear and a reboot seems to be the only way to get them back. I've tried restarting the Spooler with no effect. I've gone to Microsoft's site and been unable to find anything on the topic.

Last time this happened my System Log was full (could this cause that?). The last entry was:

Event Type: Warning
Event Source: Print
Event Category: None
Event ID: 2
Date: 5/27/2004
Time: 1:41:35 PM
User: NT AUTHORITY\SYSTEM
Computer: NICO2
Description:
Printer hp LaserJet 1300 PCL6/DEB/Session 2 was created.

In addition to this error message in the Sys Log, I also receive the following two errors frequently and they were also the first two entries in the Sys log after rebooting:

Event Type: Error
Event Source: Print
Event Category: None
Event ID: 31
Date: 5/27/2004
Time: 1:41:57 PM
User: NT AUTHORITY\SYSTEM
Computer: NICO2
Description:
PrintQueue CN=NICO2-Generic / Text Only could not be created under Container LDAP://NICO1.nico.local/CN=NICO2,CN=Computers,DC=nico,DC=local because Mandatory properties could not be set. Error: 80070005

&

Event Type: Error
Event Source: Print
Event Category:... Read more

Read other answers
RELEVANCY SCORE 58

I am using Windows server 2000. It runs as our terminal server. One of our users connects to our ts and attempts to print to her local printer. The user is using xp. The users printer will not map and does not show up in the event logs. I have tried using another xp pc from another remote location using exactly the same drivers. It works from there and several other places I have tried. I've also tried to map the drives and this also fails. Can anyone give me any ideas as I have ran out. Thanks in advance.
 

Read other answers
RELEVANCY SCORE 58

I have a Thin Client that has a local HP Deskjet 3820 printer attached to it via LPT1 parrell port.
The ThinClient specs as follows: Neoware 5.3//Windows CE 3.0//RDP Client 5.0 build 179.

The thin clients access the Corporate Server (W2000) via a terminal services connection and were able to print documents off the server to the local printer. Recentley the Thin Clients were having issues with printing and the HP printer was deleted off the server.

I have made a TS connection to the server to see if the printer would re-install with no luck.

This set-up was working at one point -- How can I fix?

Thanks
 

A:Terminal Services Printing

You have to have the exact same printer driver loaded on both systems so I would check the clients driver version and the server then has to load the SAME version.

When its done right you should see the icon show up in the server print que as somethign like XXXX printer on your computername
 

Read other 3 answers
RELEVANCY SCORE 58

Does anyone know of a reliable way to get a Terminal Services client to print to a print server locally? I had wanted to hook up a group of users at a remote location to the Terminal Server but according to MS the only useable printers are the ones connected directly to the client itself. Is something like Citrix Metaframe my only option?
 

A:Terminal Services Printing

Read other 9 answers
RELEVANCY SCORE 58

Hi -

I have two terminals which connect to a state owned and operated main-frame type system. We are a local government. I honestly have no idea what the state system is running. Anyway, currently the terminals print to local dot matrix printers connected to their LPT ports, by using the print key.

We bought two new LaserJet 1200 printers. They don't work. We connected one to a PC and it works fine, but it will not take a print command from the terminal.

We hooked up a deskjet to the terminal and it prints. I called HP and they steered me towards networking these printers, but that's gets hairy since it's a State server. When I told HP that the deskjet worked they were puzzled. The thinking was that if the deskjet worked the 1200 should work but they could not help me figure out how or why.

Does anyone have any ideas?

Thanks
 

A:Printing from a dumb terminal

Read other 9 answers
RELEVANCY SCORE 57.6

I connect from home to my server at work through remote desktop. How complicated is it to set it up so I can print from an application open in remote desktop to the printer connected to my computer at home? Does the OS matter? I am connected at home from a machine running XP Home to my server running Server 2003 Enterprise. Ed.
 

A:Solved: Terminal Services Printing

Read other 9 answers
RELEVANCY SCORE 57.6

i'm connecting an external PC to a PC within my company to use a specific application and need to setup printing so that when connected to the company PC application i will be able to print reports from it onto the local PC?

can someone please explain to me how best this can be done?

thanks a lot

Read other answers
RELEVANCY SCORE 57.6

I am running Win 2000 Server and 2000 Pro on my workstations. I have two employees that work from home - both of them have brand new machines running 2000 Pro as well. They access my server using terminal services. The first employee that I hooked up using an Epson CX5200 MultiFunction Ink Jet worked fine. No problems printing at all.

When I set up the second employee with a new computer running Win 2000 Pro the problems began. These problems have not effected the original employee with the Epson at all. My new employee, Tammy, is using a Dell A960 MultiFunction Ink Jet. Nice printer but she can not print to it while logged on to the server using terminal services. Yes, I have the setting turned on to take local devices to the session. If both employees are logged on at the same time I can print from Tammy's computer to the other employees Epson if I select her printer in the print window. So I can print remotely from terminal services from to the Epson located at another house but I can not print to the printer that is right next to Tammy's machine. Very frustrating. This is the second printer that I have had hooked up. I tried an HP Multi Function first and it did not work either.

Any thoughts??
 

Read other answers
RELEVANCY SCORE 56.8

I put this here because it has to do with Terminal Services which in by nature is Networking...

Okay I have an issue. We have a server that has a few print drivers installed to it. Each driver is associated to a TS port in order to print locally at their desk I.E. TS001, TS002, TS003 and so fourth. The problem is the ports are active depending on how many people are logged in it looks like. So if 3 people are logged in all 3 ports are active and they can print to all 3 devices mapped. But lets say I was set up on TS003 but I was the only one logged on I would only be able to print to TS001

How do you statically make a 1 for one correlation between the TS00X port and the user who is logging on?

Could it be because we have this setup as W2K3 Terminal Services for Administration and its not application like our other server is?
 

A:Terminal Services W2k3 - Printing port changes?

Never mind I figured it out - Terminal Services printing only works if its a local printer AND if it is the exact same printer driver. I was loading PCL 5e on the server and the client had a PCL 6 driver. I have since changed the drievers to be all XP drivers and PCL versions and they can connect and print just fine.

If anyone can tell me of a way to get it to print from the terminal server service to a machine that has a network printer attached (NOT attached or accessible to the Server) I would love it.

TIA.
 

Read other 2 answers
RELEVANCY SCORE 56.4

Hi Folks - I need a mobile printer that is supported by WTS. I tried using a HP 450 - great little printer to print from the local, but not able to print from terminal services without emailing it my myself as a pdf file first. Does anyone know of a printer that will print direct, and is also mobile for use on the road with a laptop?

Thanks for any suggestions!
 

Read other answers
RELEVANCY SCORE 54.8

This morning i am having issues with my company's remote site connecting to our server. I have a facility here and everything is fine. The Remote site there are three machines. They have been connecting for years and this morning nothing. They get online but can not connect via RDP. Just errors out, can not connect. I can connect from home just fine. Oh and heres a weird part. The vista machine can connect but two xp machines cant. HELP!
Thanks
Steve
 

Read other answers
RELEVANCY SCORE 54.8

Can I add terminal server role to my domain controller? The domain contoller only holds the files of the folks in the active directory. No databases run on this computer.
As of now the DC will only allow just the two administrative log ins and I have setup the terminal services licenses for 150 users on another computer in the domain.

Thanks.
 

A:Terminal server

Read other 10 answers
RELEVANCY SCORE 54.8

Think I probably know the answer to this, but worth a shot.

I've got a bit of software that I've loaded onto our server and would like to be able to be accessed by people logging in.

When I run the application, it comes up saying that it can't be run on Windows Terminal Server.

Is there any options that I can adjust to enable this or will it simply not run?
 

A:Terminal Server

Probably not.... it usually helps to mention the software name though.

If it expressly says it won't run on terminal server then I highly doubt it will.
 

Read other 2 answers
RELEVANCY SCORE 54.8

Hi all,
My task is to allow my accountant access to my MYOB files. He tells me his clients usually do it through Windows Terminal Services (which I guess is the Terminal Server software). A few questions to start: How do I find out if its been installed; how do I enable it? and how do I get into the configuration of it? I'm new to this one but Ive got Logmein and XPUnlimited to work in the (distant) past ....
The other totally newbie question I have is .... Once its setup, what does the person that wants to connect to my machine do to connect?
Thanks
T.
 

A:XP and Terminal Server

XP does not have Terminal Services; TS is available on Windows Server versions only. Instead, XP has a part of it called Remote Desktop. Certain versions of XP can act as a Remote Desktop server.

What are MYOB files, and what type of access does he need? (Meaning, what is he doing with them?)

BTW, which version of XP do you have?
 

Read other 1 answers
RELEVANCY SCORE 54.8

I am setting up terminal services using windows 2000 server. Does anybody know of any good texts or documentation is on how to do this. I have some bits and pieces form all over the place but I thought somebody here might be able to better direct me.

Thankyou in advance
Shukran
 

A:Terminal Server

Here's a pretty good site: http://windows.about.com/cs/terminalservices/
 

Read other 1 answers
RELEVANCY SCORE 54.8

Hi all hope someone has an idea because I am clueless.
helping out a Real estate office, they have Windows 2000 server which shares files and has a few apps, and runs terminal server for about 25 on and off users. The server is bogging a bit at the terminal database program, so i figured adding a second 2000 server to ease the terminal services load made sense. Also thought why not make it a bdc as well, good backup, but use the bdc for terminal services, double duty. My 30 or so accounts with settings already created so makes sense.

I installed the second machine, added it and promoted it to 'seconday server'. Within 10 minutes my users are populated from the pdc in user manager, beautiful. Except I can't log in to the bdc at all with anything but 'administrator". Whether through terminal services, or right at the console, any account other that administrator fails. "The system could not log you on, be sure username and password are correct" etc.

Am I missing something? Can I do what I'm trying to do?

Any help or clues would be appreciated!

Thanks all
 

Read other answers
RELEVANCY SCORE 54.8

now that i have all my users logging in remotely to the terminal server, they are filling up the c drive and it is having problems. how do i get the users info not to be housed on this drive? I want all the users to use the f partician.
All info has been greatly appreciated!
 

A:Terminal server

Read other 10 answers
RELEVANCY SCORE 54.8

Location One :--- Head Office

I have one Terminal Server which have local IP Address as what I am using the IP range in company. IP Address of the server is configured in my SGS Firewall and is linked with Global IP Address.

Location Two :--- Ware House

I have one computer in warehouse which is using Dialup connection to connect with the Head office to access one folder.

Please Help :---

How can I connect warehouse computer with this terminal server through Dialup.
 

A:Please Help Terminal Server

start with this ms article
 

Read other 5 answers
RELEVANCY SCORE 54

This has been happening for a while now, several times per week. I notice activity on my Terminal Services Manager, and when I look at it I see that someone/something is trying every second to log onto it. It trys, gets bumped, and then immediately trys again.. until I disable my WAN to terminal server. Then he goes away when he can't hit it anymore. Now, there are only 4 users in this terminal server, so I know its an outside source. I am running Windows Server 2003. My question is, what can I do??? Is there a way to trick him? Let him on my server, but in a digital sandbox environment? I used to be able to see an ip, for a split second, but now it appears its masked. I am using default port of 3389 to listen for my clients, so I am about to change that.. But still feels to passive. I am mad about seeing someone trying to break into my house (analogy). Is there software that will let an attacker know that I am not going to stand for this? Thanks to techguy forums. I have been here a lot, just never asked a networking question. Have a great day folks.
 

A:Bot trying to hack my Terminal Server..

bump.
 

Read other 3 answers
RELEVANCY SCORE 54

Hi guys,

We have recently upgraded all of our clients machines from XP to Win7 pro. and left all our servers on Win2003 st. edition. While on XP, users were able to connect and print on our terminal server which is running Win2003 but we have been having problems after the clients were upgraded to win7. User's printers are not being redirected now. Im not too sure if this is windows7 with win2003 issue or just HP drivers issue because all the printers are HP. I did try and find most of the HP win7 drivers to isolate the problem and I even downloaded HP univ. drivers but still the printer were not being redirected. What could be the issue here, I'm really confused.

Please help. Thanks

A:Win 7 and Win 2003 terminal server

Hi msizim - Welcome to SF,

Do you have a Print Server Role configured in one of your Windows Server?

Read other 4 answers
RELEVANCY SCORE 54

I have a NT 4.0 terminal server with the citrix server installed as well. The problem I am having is that when youre logged in and idle after a certain time you gett disconnected. Your processes still run on the server. When you log back in you're supposed to be right where you left off, however Word 2000 is coming back screwy where pages out of a document get scrambled. I want to bame this on word and temp files but not sure. Anyone else have any ideas? It only shows up in word so far adn only after a disconnect and reconnect.
 

Read other answers
RELEVANCY SCORE 54

I have a user who is conneccting to our VPN server via
the internet remote connection. He stays connected for
anywhere from 15 minutes to an hour and a half. Then he
is kicked off with a VBscript remote desktop disconnected
internal error has occured error. When he tries to log
back in again he cannot find the server. I need to
reboot so that he can log in again. Had him ping the IP
and it timed out. Anyone know what is going on with
this??

 

Read other answers
RELEVANCY SCORE 54

hey does anyone know where i can get a list of terminal server compatable printers just need to know what will work so can make recommendations would appreciate any suggestions
 

A:Terminal server and printers

the vendor site of the terminal server?
 

Read other 1 answers
RELEVANCY SCORE 54

I have a NT 4.0 terminal server with the citrix server installed as well. The problem I am having is that when youre logged in and idle after a certain time you gett disconnected. Your processes still run on the server. When you log back in you're supposed to be right where you left off, however Word 2000 is coming back screwy where pages out of a document get scrambled. I want to bame this on word and temp files but not sure. Anyone else have any ideas? It only shows up in word so far adn only after a disconnect and reconnect.
 

Read other answers
RELEVANCY SCORE 54

I'm new to the forum and not too tech savvy, so please be patient.

OS: Windows 7 64 bit

Laptop: ASUS Notebook K60IJ Series

I work from home a lot by remoting in to my PC at work. Last week I was able to remote in just fine, but today could not using my laptop. I could remote in using my wife's laptop just fine, but could not using mine. I get the following error:

Could not connect to terminal server

I can log into the network just fine. I have a random passkey that I enter etc. But, when I put in my workstation ID and try to connect, I get the above error.

Again, I was able to log in just fine using my wife's laptop today, but not mine

I have not made any changes recently (that I know of)

Any help would be greatly appreciated. If you give me something to try, please provide step by step instructions on how to complete the steps. Thank you

Update:

This seems to be an Internet Explorer issue. I downloaded and tried to remote in using Firefox and it worked just fine. Any ideas why IE is now giving me issues? Is there a setting that changed? I was gonna try to uninstall and reinstall IE, but it does not come up in my list of programs to uninstall...

A:Cannot connect to terminal Server

Go into System Restore and restore your PC to a date before you started having trouble. If you are not familiar with the process, look at this tutorial System Restore Let us know how it goes. This will not erase any of your data.

Read other 1 answers
RELEVANCY SCORE 54

I have netmeeting on the terminal server (nt4.0 SP5) connected straight to the internet. Works great if I'm at the console. If I try to connect via terminal server client or citrix client it still hosts meetings but sharing and collaboration buttons are grayed out??? Please help!!!
 

Read other answers
RELEVANCY SCORE 54

How do I clear the name of the previous use from the user name box when logging into a terminal server?
I want the login box to be blank when the login screen displays.
John
 

Read other answers
RELEVANCY SCORE 54

I just loaded up Windows 2000 Professional (Installed, same thing) how do I run/configure Microsoft Terminal server/
 

A:2000 Terminal Server

Do you mean the Terminal Services Client? You need a W2K server running Terminal services to connect to. the client is on the w2k server disk. Install that and configure to the server.
 

Read other 1 answers
RELEVANCY SCORE 54

Hi,

Apologies if this is not the correct forum but I figured it was closest.

When I log onto one of our new Windows 2003 terminal servers I get the error message:

"Your terminal services temporary client license will expire in 6 days. Please contact your system administrator to get a permanent license"

I looked for part of the message on the net and got the following ...

The function of Terminal Server CALs in Windows Server 2003
http://support.microsoft.com/kb/822134

... which told me that the solution was:

1. Click Start, point to Administrative Tools, and then click Terminal Services Configuration.
2. Click Server Settings, and then double-click Licensing Mode.
3. Change the Licensing Mode to Per User, and then click OK.

The problem I have is that if I do that I cannot change the licensing mode as the box is greyed out (no drop down).

This problem will cause the collapse of a major system within a few days so I am asking for help as I do not know what the solution is.

Kyu
 

A:Terminal Server Licensing

The TS needs to be licensed and it doesn't think it is. Are you using this just for the admin connections (2max) or for users to logon? If its for users you need to register that box with your license server for the TS cals.

edit: this may help http://support.microsoft.com/kb/325869
 

Read other 2 answers
RELEVANCY SCORE 54

Hello all,

Hope someone can help me out with this. We have a Terminal Server 2008 R2 running inside of Hyper-V. Once a week or so we are getting Bluescreens and the server reboots. I ran the SF Diagnostic Tool and upload to this post Appreciate if someone can help me out here.

Thanks

A:BSOD on Terminal Server

You have to much user mode application craches (information from MSINFO32.nfo). And in 2 dmp files we have:
CRITICAL_OBJECT_TERMINATION (f4) Probably caused by : csrss.exe EXCEPTION_CODE: (NTSTATUS) 0xc0000005
CRITICAL_OBJECT_TERMINATION (f4) Probably caused by : csrss.exe EXCEPTION_CODE: (NTSTATUS) 0xc0000005
It can be system files corrupted (try sfc /scannow ) or problems with security patches.

Read other 3 answers
RELEVANCY SCORE 54

I am trying to install Quickbooks Enterprise so that it runs as a Termnial Server session. Since Intuit is no longer supporting Canadian versions of this software I have no luck getting the proper procedures from them to complete the install. Does anyone know what is required to get the install done? Should be the same as the US version.
 

Read other answers