Over 1 million tech questions and answers.

Lenovo 3000 N100 random automatically power off (complete shut down)

Q: Lenovo 3000 N100 random automatically power off (complete shut down)

I have this 3000 N100 laptop for over a year now with no problems (except the lousy battery which died in 6 months and I'm running on A/C since then). Last week I started laptop and this shutdown problem started appearing. System would start normally and then would suddenly power itself in 2/3 minutes (most of the times, but sometimes in runs for 2-4 hours before shutting itself down)I checked the fan and processor. Nothing is heating up.I changed processor. Even then it'd go down.I have made the fan DIRECT (always ON) but the system still shuts down.I tried hmonitor but it only reads HDD temprature which is 36-40C - I guess very normal. Now I wonder where the problem may lie. Is it motherboard? What part of board might be getting heat? Or is it actually heat? Or do I need to get certain parts (capacitor, I/C or something) on Motherboard replaced? Any help? Comments? Suggestions?













Solved!

Go to Solution.

RELEVANCY SCORE 200
Preferred Solution: Lenovo 3000 N100 random automatically power off (complete shut down)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Lenovo 3000 N100 random automatically power off (complete shut down)

I have been having this same issue the past couple days. I power my Lenovo laptop up.. it will boot into Windows XP.. then after 2-3 minutes - it will shut down. If I try to boot up again, the same process repeats. It is running on A/C now and still does this ... could it be a battery issue still? This would be the third battery that I purchase for the laptop since I bought it new. Thanks...

Read other 9 answers
RELEVANCY SCORE 95.2

Hello.I have a ( now ) ancient Lenovo 3000 N100.I don't like throwing things away and if I can get it restarted I would be pleased. Basically, it won't boot up.   I get a message: STOP: 0x000000ED (0x89B16858,0xC0000006,0x00000000,0x0000000000 ) Is there any SIMPLE way to just go to a factory reset ? .   I see posts saying 'press the Lenovo care button'  but where is that ?  what does it look like ?Others say stick a pin in a hole   ~but I cannot see any pin stickable hole anywhere ...... So what to do ?  I doubt if it is worth spending money on. 

A:Factory Reset for Lenovo 3000 N100 ? How ? Cannot see 'Lenovo Care Button' or pinhole anywhere

Hi jonblane1,1. May I know what Windows are you using? 2. You may try to access Lenovo System Recovery by pressing F11.3. If Step 2 does not work, you may refer to this link.
 
Peter
ThinkPad X40 | ThinkPad W520 | ThinkPad T560 | ThinkCentre E73 SFF | Yoga 11s | Yoga 3 Pro | Yoga 900 | Yoga Home 900 | Yoga Tablet 2 Pro | Miix 2 10" | IdeaPad Y460p | IdeaPad K1 | 3000 Y300 | Vibe K5 Plus
Give kudos to reward people for their assistance | Mark thread solved if the solution works | I am an active volunteer, not an Lenovo employee
=====================================
List of Sound Enhancement Thread
T520 | W520 ; Dolby ; IdeaPad Slate Tablet ; Yoga 3 Pro ; X100e ; Vibe Shot ; Yoga 900 ; P50 ; P40 Yoga | Yoga 14 | Yoga 460 ; T560 | P50s ; Vibe K5 | K5 Plus ; M0620 Speaker Mod

Read other 1 answers
RELEVANCY SCORE 93.6

I recently had to restore my laptop to factory default settings because of a virus that i had caught on my computer. With doing that i installed all of lenovo software for my computer such as sound drivers, built in webcam etc..my computer works fine but the only thing im having problems with is the usb ports. They are not reading any external devices such as my microphone and usb external devices..

Ive been researching and i think its the bios but not sure i downgraded to the previous bios but with doin that the sound didnt work and the wireless internet wasnt read either..then i updated to the bios and everything works fine except the usb ports still.i also tried to update the ports and uninstalling and reinstalling but it still didnt work

if anybody has any ideas on how to get this problem please reply to this post please its very appreciated
 

A:USB problem with lenovo 3000 n100

See How to Reinstall Your USB Controllers and Motherboard Chipset Drivers
See USB Device Problems? Check for Windows Updates as well
 

Read other 2 answers
RELEVANCY SCORE 93.6

I have the 0768-a49 model which came with vista business. I downgraded to XP pro sp2 ever since then i've been having alot of problems. I even try going back to vista, but didn't help, so i just kept it at xp........1-finger print reader doesn't work. installed driver, installed software,nothing. 2-same thing with bluetooth. the wifi and bluetooth switch is the same. wifi works, bluetooth doesn't come on at all. 3-usb connect disconnect when i press any button on the keyboard-tried different bios like stated in the other thread, but didnt work. 4-sound works,but when i plug a headphone i get sound on from both headphones and laptop speakers. Can someone help me solve these problems, especially the usb. I been using alot of flash cards and i can't connect them to transfer files.....
 

A:Nothing but problems with Lenovo n100 3000

You should go to the Lenovo Driver Matrix, to download and install all drivers listed, using the text explanations exactly.
When done properly, your Lenovo 0768-A49 will work just fine.
As a shortcut, you can install the Systems update 3.14 by your model:
ˇ H100
ˇ J100
ˇ J105
ˇ J110
ˇ J115
ˇ J200
ˇ J200p
ˇ J205
ˇ K100
ˇ Q100
ˇ S200
ˇ S205
. C200
ˇ N100
ˇ N200
ˇ V100
ˇ V200
ˇ Y100
Or you can connect to the Lenovo site and let their system tell you what you need and install it for you.
Basically, you need the Chipset most importantly, being sure your BIOS is up to date.
The Matrix will show you exactly what you need... it can be as many as 35 download installs, depending on your exact model.
Or you can buy the Lenovo WXP Professional disk set by telephone for less than $50 including shipping.
 

Read other 14 answers
RELEVANCY SCORE 93.6

Hi.I've got some problems with my computer. 1. Due to some unexplainable reason, whenever I type something on the keyboard, all my USB ports stop working for the time I'm typing. When I stop typing it takes a few seconds to recognize the USB device currently attached and it starts working again.  2. Another problem is with my sound driver. It's kind of messed up. I can't hear any sounds from the speakers unless I've plugged in headphones. And while they're plugged in I can hear sound from both, the speakers and the headphones. At the moment I've disabled front panel jack detection and I can hear sound from the speakers without having to plug anything in, although when I do, I don't hear sound from the headphones, but still from the speakers. 3. I haven't been able to find any working drivers for my SD card reader. 4. The driver for the fingerprint reader does not work. The device manager shows that I have AuthenTec AES2501A installed but when going to Biometric devices in the control panel, it says that Windows didn't find any biometric devices. 5. I've been unable to get my bluetooth device to work. I've tried adding a new device and it can't find any, even when I have several working near the comupter. Also, trying to see all the devices I have connected to via Bluetooth, the window pops up and never stops loading. Without showing any devices. I'm using Windows 7 Ultimate 32-bit. Lenovo 3000 N100 0689. I would appreciate some hel... Read more

A:Lenovo 3000 N100 trouble.

did you try to perform clean windows installation by pressing one key recover button?

Read other 9 answers
RELEVANCY SCORE 93.6

I have a Lenovo 3000 N100 (0768-2CU) and I can't seem to find the drivers here... My model doesn't show in the dropdown slection under drivers & downloads.  If did find the drivers for the N200 but I have the N100.   Anybody know where I might find them?










Solved!
Go to Solution.

A:Lenovo 3000 N100 Drivers?

Good day and welcome to the community.
 
Please visit the EOL driver site: http://download.lenovo.com/eol/index.html
Once you make your selections in the three dropdown menus, you should be presented with your driver listing.
 
Hope this helps.
Regards.

Read other 5 answers
RELEVANCY SCORE 92.4

I have an Lenovo 3000 N100 Notebook, TYPE: 0768-04U which came loaded with Vista operating system. The battery that came with it was DOA so I ordered a new battery from Lenovo which is working fine.

The issue I'm experiencing is as follows:

After using the notebook where everything is working just fine. No devices with any issues, I go through a normal shutdown and leave the notebook off for a day or two with the new battery in (fully charged) and the power cable plugged in.

Upon trying to boot up, the Rescue & Recovery process kicks off automatically and Vista will not boot. However, if I take the battery out and unplug the power chord and leave it sitting for a day or so and then put the battery back in and plug the power chord in, it boots up with Vista with no problems.

Anyone have any ideas on what might be causing this or what to do to remedy this situation?

Thanks!
 

Read other answers
RELEVANCY SCORE 92.4

Hi everyone,

I have recently acquired a Lenovo 3000 N100 768-BXG and like many people with the N100 have massive USB problems.

Now I have read up and discovered that this is a problem with the BIOS which seems to affect all the available BIOS except the 1.08 version for machines preloaded with Vista - well I have the 2.06 BIOS for machines preloaded for XP.

I have read that I can flash the BIOS to an earlier version designed for the C200 (specifically that contained in the 63af02us.exe update, DL20102A.WPH) which is I think the 1.02 BIOS - then I can reboot and it will then allow me to flash to the fixed (ie: USB working properly!) 1.08 BIOS.

Now for the meat of the question: I have installed Win7 on the laptop as it came with no HDD thus no recovery partition etc. Do I have to wipe this install and install WinXP Pro in order to perform the BIOS flash? Can it be done from Win7 safely or at all?

I have never flashed any BIOS except my router although I am fairly confident that I have read and understood everything required. My problem is that I don't really understand the detail of BIOS and am only able to post this due to scouring other people's posts on this and other forums.

Can anyone out there confirm that I have the process correct, and answer my questions?

Thanks in advance to anyone who can help me

Stokey

EDIT: The laptop has no battery at all - I know it is recommended to have a charged battery before BIOS flashing but is it essen... Read more

A:Help resolving USB problem with Lenovo 3000 N100?

If there is a downloadable Windows based bios flashing utility from Lenovo for your model laptop you should be able to use it to flash the bios without much trouble, regardless of the Windows version installed. Don't worry about having no battery installed. Bios flashing should never be done on battery power alone. If the laptop can boot from the CD/DVD you could flash the bios using a CD/DVD image. You will also have an option to back up the current bios to a file. If the bios flashing fails, the laptop may be rendered useless, so no recovery can be attempted
 

Read other 4 answers
RELEVANCY SCORE 92.4

Greetings, This isa free laptop, Lenovo 3000 N100. I bought a power supply for it. It was running a Non-Genuine version of Windows 7 so I formatted and installed Puppy Linux. Problem: The fan runs for a couple of seconds during bootup, then no more. The laptop will shutdown randomly, I assume from overheating but I don't know that. The battery is dead so I pulled it out and am running straight off the power supply. I pulled the fan out and taped (3) 1.5V batteries together, hooked some leads to them and found that the fan runs fine and continuously. I cleaned out all dust found in the air vent. This has not fixed the problem. Something is telling the fan to shut off. Don't know if this is a motherboard problem or what? It is so far a free computer aside from the power supply. Any ideas? Thanks,Doug 










Solved!
Go to Solution.

A:Lenovo 3000 N100 Fan Runs 2 seconds

Welcome to the Lenovo Community !
 
The fan problem maybe why the computer was free especially if you dumpster dived it.
 
With the fan wired to the batteries does the computer still shut down randomly?  You could also see if Linux has any apps or software for temperature monitoring to confirm overheating.  If overheating is an issue you should probably renew the thermal paste and see that the heat sink is securely mounted.  Either of those can lead to high temperatures.  If overheating is not an issue it just might be that the computer isn't getting hot enough for the fan to kick in for additional cooling.

Read other 6 answers
RELEVANCY SCORE 92.4

I have a IBM Lenovo N100 3000 laptop that keeps shutting down at random, it doesnt matter what you do it shuts off when it feels like, what i notice is if it is off for a while it will stay on longer before the first shutdown but once the first shutdown occurs it just keep on doing so as soon as around 5 minutes after bootup.
I thought it was having a heat issue so I opened the section where the fan and processor heatsink is and cooled it manually with an external fan, i actually had my hand on the processor heatsink one of the time when it shut down and it was extremely cool.
I reformatted my hard drive and installed a fresh copy of windows...same problem
I went into BIOS and left it there to see what happen...it shut right off just the same!!!
(I also noticed in the BIOS there is no power management nor temperature readings even though I have ruled out overheating previously I would have loved to see these settings)
so now i'm down to definitely a hardware issue!!
I replaced my memory to see if that was the culprit.....it shuts down just the same!

oops my battery is no good so I wondered if that was the influence so I removed the battery completely and booted it on just AC power...it shuts down just the same!
Could you experts please kindly advice me of what other possible hardware could be causing this problem?
I have tried my best, I really dont know what else to do.
 

A:IBM Lenovo N100 3000 laptop that keeps shutting down

Sounds like overheating. If the thermal paste has worn and/or is not making proper contact with the CPU heat sink and fan, your computer will overheat and shut down quickly, to prevent damage.

Also, the heatsink WILL appear cold in that case, because proper heat transfer isn't taking place, so the heat doesn't really transfer to the heat sink accordingly thus seeming "cold." If you can, re-apply the thermal paste or have a technician do it for you.

Another thing to do is make sure the fan and heatsink aren't full of lint/dust, etc. That can prevent heat dissipation and cause overheating.

If none of those work, you are looking at a different type of hardware problem, such as a faulty motherboard or CPU.
 

Read other 1 answers
RELEVANCY SCORE 92.4

Dear all I have troubles with my battery on my old LENOVO 3000 N100 0768 I would like to reset battery , but power manager can not detect my battery, there is text" battery is not installed" Could you tell me correct version of power manager and HOTKEYS for that  model, which is working. Or is there any other possibility how to reset battery? Thank you very much Steve

Read other answers
RELEVANCY SCORE 92.4

Hello community. I am owner of this old laptop. As I am a student i've gained access to free Microsoft software - including Windows 10. I've always used Xp on this laptop before but now i wanted to try out this new OS. The problem is, that everything works fine besides that i have no sound. In audio device tab i only have S/PDIF audio device which generates no sound from speakers(obviously). I have already tried drivers installed from EOL in compatibility mode but with no luck. Any ideas how to fix that?

Read other answers
RELEVANCY SCORE 91.6

Hello Everyone !

I have a Lenovo 3000 N100 0768FGG model. I'm facing a problem when I press any key on the keyboard any device connected to USB port disconnects and reconnects. This is really frustrating I've been searching for the solution on the internet for quite some time and I came across this board. So please can anyone help me with this problem? It will be a great help if anyone can advise a solution..... Thanks

Kind Regards

Faisal
 

A:USB disconnects when any key is pressed on the keyboard : Lenovo 3000 N100

Yes Faisal,
a bios upgrade will fix this issue. Check for a bios update from Lenovo support
 

Read other 20 answers
RELEVANCY SCORE 91.6

My Lenovo 3000 N100 laptop, running Windows XP Professional keeps getting a message on the bottom right corner of the screen from the information message spot that says:

Windows - Corrupt File
C:\System Volume
Information\Restore
(A8393674-085C-4723-B63E-39928C5F4C89) -\RP1206 is
corrupt and unreadable. Please run Chkdsk utility.

I ran the Chkdsk utility and it ran 1 of 3, 2 of 3, and 3 of 3.
It stated:
File type is NTFS
Warning: F parameter not specified.
Correcting error $ 130 for file 11593

then went on to repair many errors. But it didn't change the Window -Corrupt File note/warning. The computer runs for a while, then craps on me and freezes up. Any help appreciated. Bill

A:Lenovo 3000 N100 laptop has corrupt file

Try running system file checker

http://ask-leo.com/what_is_the_syste..._i_run_it.html

Read other 3 answers
RELEVANCY SCORE 90.4

Hi there,
Can anyone help me? I'm quite desperate here.
I'm having problem with my keyboard/USB.
When I press any key on the keyboard, that instant all USB devices are disconnected. And soon after I unpress it, the system will detect all USB devices like they were just plugged in. I say all USB devices, cause it doesn't matter USB mouse or USB drive, they all get disconnected.
It's frustrating me cause I can't use a USB mouse.
Please help

I'm using a Lenovo 3000 N100 0689GRA.
 

A:Solved: Pressing key disconnects USB Lenovo 3000 N100 0689GRA

How many USB ports does that have? and what are connecting them. If you could also please look in your event viewer (Start>control panel>administrative tools>eventviewer, and check the "SYSTEM" area. double click any item in that list for a detailed description. You should see some errors.
 

Read other 29 answers
RELEVANCY SCORE 90.4

Hi,
 
I am using Lenovo 3000 N100 laptop. I can't able to open the windows as it shown the "Blue Screen Error Message". Whatever I do to try to fix the issue but its still does not work.
 
What should I do? Thank you
 
 
Mod's Edit: Additional information added to Subject line for clarity of issue.
                     Moved posting to it own thread

Read other answers
RELEVANCY SCORE 90.4

My laptop was working fine last summer until the Windows Genuine Advantage kept popping up telling me it wanted to verify if my OS was valid. I tried to shut it down or disable it and windows started to behave strangely to the point that it would not load at all. I purchased the laptop in December 2008 from Micro Center in Houston brand new. I have the sticker on the laptop that tells me the OS is valid.

Lenovo did not ship with the rescue and recovery disks, instead it has a rescue partition. The rescue partition would not restore the laptop. So I tried the rescue and recovery DVD I created. Somehow it did not create the product recovery CDs. When I called Lenovo about this problem, they belittled me and then charged me $50 for the set of Product CDs. I thought my troubles were over, wrong!

After installing the CDs windows almost loaded and then it went to the blue screen of death. This happened a few times. I tried reinstalling the disks and everytime I would receive a different error message, it is missing drivers, it can't locate a file, etc.

Today it returned:
The application or DLL X:minint\system32\umpnpmgr.dll is not a valid Windows image, Please check this against your installation diskette.

Product Recovery could not find file Z:\UBREC.CMD

I called Lenovo and again, no help. I am at a loss. My laptop was fine until the Microsoft Genuine Advantage pop-up kept showing up. And Lenovo is not providing any support for the faulty CDs they sold me.
... Read more

A:Problems restoring Lenovo 3000 N100 laptop XP Professional

I don't think XP is sold any longer, but if you can find an XP install disc, you can use it to delete the old partition(s) and freshly format the hard drive and install XP correctly
 

Read other 1 answers
RELEVANCY SCORE 88.8

Hi. I was just given a Lenovo 3000 n100 (prod. i.d.# - 97684JU) laptop that had crashed. If I can fix it, it's mine. Yay!

Problem: Keyboard does not work. It has a fresh install of XP with Service pack 2 - which I believe was taken off a disk labelled XP Pro Svc pk 2, w/sata drivers for gateway - key preloaded - which was in dvd drive.

In device manager under other devices there is a list of devices marked as uninstalled drivers -
3 base system devices,
fingerprint sensor,
foxconn bluetooth 2.0 plus EDR,
Network Controller
PCI Device
SM Bus Controller
Video Controller
Video Controller (VGA Compatible)

The registered to in properties of My Computer has all the symbols for two lines. I have figured by trial and error that the keyboard is not working. USB keyboard and mouse do work.

I have a XP Pro cd, version 2002, unopened that I can use to reinstall the operating system - however this one I believe is for a compaq/hp pc.

My question: should I download all Lenovo drivers to a flash drive, and do I need anything special during install?

will computer recognize usb keyboard and mouse if i am formatting and reinstalling opsys?

I am thinking that maybe with the disk they used that may be the reason why the keyboard does not work.

Or can I just install the drivers needed from the lenovo site, and then fix the "registered to" and "users" in the registry?

what would be my best bet here?

thanks for the help here.

A:lenovo 3000 n100 bad xp install - keyboard not working, 9 device drivers missing

the model number you listed appears to be wrong

put the correct model number in here

Lenovo Support - Download Drivers and Software (US)

Read other 2 answers
RELEVANCY SCORE 74.8

Right, the problem as it stands:

I have a Lenovo 3000 v200 0764-32G Laptop, which came preloaded with Vista.
"Downgrading" to XP, I discover it needs a 3rd party AHCI driver, which of course I require a floppy drive to install. Acquired an external floppy drive, downloaded the AHCI driver, got a floppy and everything was going smoothly... And then I got to the point where setup actually starts installing things (just past formatting), when it refuses to recognise the external floppy drive (which up until that point it has no problems with).

Anyone got any suggestions for possible ways around this?
 

A:Solved: Lenovo 3000 v200 0764-32G - Can't complete XP installation

See "Common Problems" in this Wiki article: http://en.wikipedia.org/wiki/Advanced_Host_Controller_Interface

If possible set the BIOS to use IDE mode for the hard drive, and then try the installation again. AHCI should only be needed for RAID which you do not have.
 

Read other 2 answers
RELEVANCY SCORE 72

Hello folks, I recently picked up some second hand laptops as projects for spare time and to learn a bit more. One of these is a Lenovo 3000 N100. I'm not sure of the exact model as the COA sticker is worn away. The laptop came without RAM, Hard drive, or battery! I'm aware this may be more effort than its worth, but wanted to give it a go..... With RAM installed, the white Lenovo splash screen displays (sometimes quickly, sometimes takes ages) - if i press Esc then the following info is displayed: Unknown Project ID!!! BIOS Version ??? 61ET32WWCPU = Intel (R) Celeron (R) M CPU 410 @ 1.46GHz1023M System RAM Passed1024K Cache SRAM PassesSystem BIOS ShadowedVideo BIOS shadowedCD ROM.....Mouse Initialized Pressing F1 or F12 does not do anything. The following errors are then displayed, which from Google I can see is a common problem. However, I cant find a fix that applies to me. PXE-E61: Media test failure, check cablePXE:MOF:exiting PXE ROMOperating System not found. From what I can see online, the laptop is trying to boot from a network/LAN. I tried an XP boot CD with no joy.I can't access BIOS to change boot priorities.The RAM appears to be functioning judging by the above messages?I tried putting in a blank HDD and removing it (tested HDD using novatech USB SATA adapter, appears to be working fine). Is my next option to reset the CMOS battery? I should add that on the first screen I initially received error codes 0271 and 0251 regardi... Read more

A:3000 N100 PXE Error, won't boot to BIOS

Welcome to the Lenovo Community !
 
I'm not an owner of your model, but in reviewing the Hardware Maintenance Manual for the N100 it notes that you must press the Lenovo Care Button when the computer is powered up.  You will then be presented with a menu from which you can access the BIOS Setup.  Page #104 of the manual will show you the location of the Care Button.  Here is a link to that manual for your reference......
 
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/42x3553_03.pdf
 
As for clearing the CMOS, it is probably not needed.  If the time and date were cleared and you received a CMOS checksum error then all the information stored in the CMOS was likely cleared  when the battery lost power from sitting unused.
 
Once you are able to get into the BIOS you should be able to correct the boot order so that you can use the XP boot disc.
 

Read other 9 answers
RELEVANCY SCORE 66.4

I think it may have somethign to do with my video card but I am not sure. I have to xfx 8800 gt's running in sli, with an xfx 680i lt mother board. I have had it set up for a bout a week, and the system is crashing more and more as time goes on. Its not even a blue screen per say, just my screen goes black and then it holds in place for a bit then shut down. I think it is creating a log however
 

A:New build, random black screen, then complete system shut down..

Read other 7 answers
RELEVANCY SCORE 65.2

Hi,
I have inspiron-15 N5010 model laptop. these days I have observed that after charging the battery, when I remove the power cord the laptop gets shut down on its own. can anyone help me with the issue please.

A:My laptop gets shut down automatically when the power cord is removed

hi,
I have inspiron-15 N5010 model laptop. These days I have observed that the laptop gets shut down automatically when the power cord is removed from the laptop. The battery works fine but after charging it and removing the power cord the laptop gets shutdown. I tried removing the battery and checking for the bent connections etc. Everything is fine. Can anyone help me with the issue please. 

Read other 8 answers
RELEVANCY SCORE 65.2

I have brought one Dell 15 7579 laptops just 4 months back. I have started facing one issue now with the performance of the laptop. Even though I have the battery fully charged then also it is getting shut down when not connected to AC power. I am really worried about this problem as this is just 4 months old laptop. PLease suggest me what should I do for this.

A:Dell 15 7579 is getting shut down automatically when not connected to AC power

Yes,it is really a problem,and i search that there is no Dell 15 7579 battery to sell.even though there are all kinds batteries in the store http://www.parts-dell.cc/

Read other 1 answers
RELEVANCY SCORE 63.2

Or does it stay on until it is drained?
I could not find any information about this in the manual.

Cheers.

A:Does the PW7015MC Power Companion automatically shut off when the target device is fully charged?

abalaba,The PW7015MC will not shut the devices off.

Read other 1 answers
RELEVANCY SCORE 63.2

I've had my computer for years and years. It will randomly crash in an instant at any given time - be it while playing a game or just surfing the web. I can find no rhyme or reason why it crashes or how to cause it to crash.

Sometimes it will run fine without crashing for months at a time. Then it slowly starts crashing more and more. First once every few days, then work its way up to crashing numerous times in a day.

The only thing I've found, through experimentation, to sort of remedy the problem is to turn off the PC, physically remove the graphics card, boot on the pc, wait ~2 mins, turn off PC, re-install GPU, turn on PC.

This usually will stave off the crashing, putting me at least back to the one or less crashes a day phase.

The issue seems to be OS independent, as I get the same behavior when running Ubuntu.

A:Random crashes - complete power shutdown

Here are my attached dump files

Read other 6 answers
RELEVANCY SCORE 63.2

Older HP Touchsmart (600-1000T) has developed a power supply issue. Random, complete power shutdowns that do not seem to align with temperature, cord, or OS status. Un/re-plugging it one or multiple times works, but only until the next outage (moments, hours, days or weeks later).  Our Touchsmart has been prone to random-seeming power outages. It?s a complete outage, as if someone knocked the cord out. I don?t think it?s related to temperature. It?s wall-mounted in a clean household environment with plenty of ventilation. There is no dust clogging the vents. It can run for days or weeks without an issue, then fail repeatedly within a short time-frame, only to finally stabilize and stay on for long stretches. It sometimes fails once or twice and then runs fine for a long time. I don?t think it?s a problem with the cord or the outlet. The cord rests on a shelf (and has done so for years), so it seems unlikely it be a break in the wire that?s causing the problem. Further, restarting can be done by either un/re-plugging it directly from the wall (leaving the ?brick? alone) or from where the main wall-cable enters the brick. That is, in either case, either the wall plug or the brick side of things are completely stationary when un/re-plugging. I don?t think it?s an OS issue. Though by nature the outages mostly happen when it?s up and running (Win7), it often blinks out during POST, well before the OS starts to load. I?m not s... Read more

Read other answers
RELEVANCY SCORE 62.8

Hi,
I have lenovo 3000 n100 0768HCQ laptop.I update my bios and after updating my system is not working well. When i press any key of keyboard ,all usb connected devices disconnects and after releasing key they get connected as they just have been plugged in.I tried with my old bios version to recover but it is not working . When flashing bios a blue screen appears and system restart.
What to do.. Please help me.......
 

Read other answers
RELEVANCY SCORE 62

I have a lenovo Y560p and sometimes while playing league of legends my computer randomly shuts down. i believe it may be because my Gpu is running too hot. It runs at around 57-59c idle and about 85-87c while playing. is this a possible reason or these unexpected shut downs?
 

A:Lenovo Y560p random shut downs

Overheating is indeed the likely cause of the shutdowns. Buy a can of compressed air and blow out all the vents and fans. If that doesn't help you may have to invest in a cooling pad for the laptop.
 

Read other 1 answers
RELEVANCY SCORE 61.6

I'm running a lenovo T500 thinkpad, and it's relatively new - that is, I bought it last winter - but recently, I've been having what seems to be a hardware problem. Or, at least, that's what the guys over in the Virus and Malware removal section are telling me:

Because from time to time, my laptop has decided it's just going to go ahead and shut itself down. Completely. No lights, no nothing - pressing the power button doesn't do anything. I almost always have it plugged into a socket, and that light won't show either - I've found that taking the battery out of the laptop and letting it sit for a little before putting the battery back in usually gets the laptop to work again.

It's only happened recently, but it's happened twice in the past week - which is a little more than bothersome, since the antivirus I have runs a full scan when it happens.

I've noticed that my laptop gets a little hot - not too hot that I can't touch it - but as far as I know, I've never had a problem with overheating or anything similar, which leaves me in the dark about this entire thing.

I'm really hoping that this doesn't turn out to be a hardware problem; I should still be on warranty, but I'm a little - okay, that's a lie, I'm pretty damn - scared to try and open up my laptop and fiddle with anything.

Hope this is enough information for someone out there to give me some sort've idea of wha... Read more

A:Lenovo T500 Thinkpad: Random shut downs?

Hi

Under warranty = dont mess with it

send it back under the warranty and report the issue.
 

Read other 1 answers
RELEVANCY SCORE 60.8

I bought my laptop in 2015 and unwarranted, I'd like some help to get full functionality back into my laptop. While the subject states my problem, I do have some ways of getting use out of the computer:It can turn on if the battery is fully drained and after the computer is plugged in; it takes 8 days to drain. [Pressing and holding the power button only results in the PC flashing its backlit keyboard.] The battery can recharge and the PC can run on battery just as long the PC does not shut down, go to sleep, or the lid closes.Battery removal with the PC plugged in: the PC can always turn on, but when closing the lid or shutting it off, the power cord has to be unplugged and plugged back in.Additional computer information:-Windows 8.1 with updates-Installed BIOS update and Windows hotfix update from Lenovo.com

Read other answers
RELEVANCY SCORE 59.6

Upgrading to better Power Supply and now my computer randomly shuts off shortly after running World of Warcraft. Went from a 600 watt OCZ to an 850 Thermaltake Black Widow.

Edit: Nothing's shorting outside of the pc
 

A:Solved: Upgrading to better Power Supply and random shut off

What are you system specs, what make and model is the machine assuming its a big brand name like HP or Dell? If its a self / custom build what is the make and model of the CPU, Graphics, motherboard, RAM, hard drives, DVD/CD drive, etc.

Any particular reason you upgraded the PSU?

Check that all cables a securely connected, unplug each and reseat it to make sure.
 

Read other 1 answers
RELEVANCY SCORE 58.8

The past 2 days my laptop has been shutting down whenever it feels like it. Out of nowhere it just turns off, no Blue screen or anything. All eventvwr gives me is "kernel-power error". Minidump folder is not created. When I tried running a chkdsk my laptop would freeze during the 10 second countdown. I could not exit the countdown. I tried going through bios but my laptop shut off while in bios. It also shut off randomly while I ran the rescue disk. HDD Re generator found no errors on the hard drive and no memory errors were found. I turned off RACtask and that didn't work. I have no idea what is going on or what any of this means:

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2009-10-17T20:15:38.343617300Z" />
<EventRecordID>22894</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Kelami</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Dat... Read more

A:Error 41 Kernel-power random shut downs no Minidump

Quote:
I tried going through bios but my laptop shut off while in bios


Your machine has a hardware problem. Further software troubleshooting is unfortunately pointless until the underlying hardware-level defect is resolved. It may be an outright broken bit of componentry, or it could be insufficient cooling due to dust buildup or the fan being blocked by placement.

The event you posted is only a side-effect of the unexpected power down event. In other words, it's not the cause, it's just Windows noticing that something "bad" happened just then to knock out the machine without a clean shutdown.

Since it's only two months old, the computer is presumably still under warranty. If that's the case, once you've ruled out insufficient cooling I'd strongly advise you to contact HP and to seek a replacement. My suggestion would be to stay away from stories of what happens while in Windows, and to focus their tech's attention on the fact that the machine has powered itself down unexpectedly while in the BIOS. That is entirely indicative of a hardware problem and it cannot be solved by anything they may ask you to change in Windows.

Read other 4 answers
RELEVANCY SCORE 58.4

Dell Latitude 3450
Windows pro 7
Brand new HDD Solid state
A little over a year old (HDD died 9 days out of warranty....of course!)
 
Began acting strange again (maybe tied to prior to the HDD crash - not sure) a few days ago - it would reboot out of the blue or upon boot-up would get the login screen and then it would go black instead of loading the desktop.  Got error messages of corrupt file and disk read error yesterday.  Went through ePSA and was able to get it up and running - but something is seriously going on with this!  This is my husband's but I can remote into it - did last night and wandered around in the event viewer - but not knowing what I was doing in there - just saw many "critical" errors listed with Kernel 41....
 
Any suggestions on how to figure out what's going on?  
 
Pam
 

A:Dell Latitude 3450 Kernal-power 41 - random shut downs

Event ID 41 errors are simply Windows way of saying it doesn't know why it shut down.  Here's a link with more info:  http://support.microsoft.com/kb/2028504 As this is an SSD, there's not much in the way of tests.  There is a suggested tool for SSD's a bit down this page:  http://www.carrona.org/hddiag.htmlBUT, I'd suggest that the first thing to do is to backup all the critical data.  If this is a failing drive, you may not have much time to recover the data before it completely dies. Then, try another hard drive and see how that works.  They're fairly cheap these days - and you can even find stores that will let you return them if they're not needed (for your money back).If the new hard drive works well, then you can presume it's the SSD that's failing.If it doesn't work well, then you'll have to start checking cables and connections. We can help a bit if you can generate these 2 sets of reports:1)  Please run this report collecting tool (even though you may not be reporting BSOD's) so we can provide a complete analysis:  http://omgdebugging.com/bsod-inspector/When done a Notepad document will open with the name of the file and it's location.By default it'll be a .zip file located on your DesktopSimply upload the .zip file with your next post and we'll move on from there.If it doesn't work for you, then please try this:  http://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions... Read more

Read other 0 answers
RELEVANCY SCORE 58.4

Hi, this is my first time posting here in this forum because I am in desperate need of help on my computer. My computer gets at least ONCE BSOD every time I turn it on after a long period of shutdown. It also sometimes randomly just shuts off or give me additional BSODs. It has got to the point that I can't even load to windows recently, which lead me to reformat my computer. I know the drivers here are not the latest ones, I am trying to use only the drivers from the CDs that came with the hardwares because the last time I used all the latest ones it still caused BSODs. I am not sure what other information I need to post up. Please help with any advices possible, very much appreciated.

Windows 7 Ultimate x64 - fresh reformat
ASUS M4A77TD Pro
AMD Athlon II X4 635 2.9Ghz Socket AM3 95W
Crucial 4GB DDR3-1333 (PC 10600) MT16JTF51264AZ-1G4H1 (It's a 2x 4GB set, but I'm just using once at the moment to filter out problems)
SAPPHIRE Vapor-X Radeon HD 4850 1GB 156-bit GDDR3
Western Digital Caviar Black 640GB 7200RPM SATA
Antec Trupower 650W

A:BSOD after long period of shutdown on startup, random power shut off

Download and install the new version ofDriver Sweeper
Download the most recent software\driver for your ati AMD Graphics Drivers & Software
Uninstall ati software\driver,restart in safe mode,run driver sweeper,choose only AMD-Display andclean,restart in normal mode.
Install the new ati software\driver,restart.

Update DirectX

Read carefully the instructions and run http://www.sevenforums.com/tutorials/160729-
nvidia-amd-video-card-test-occt.html post here the results.

Read other 2 answers
RELEVANCY SCORE 57.6

Hi Got a Y5070 about a month ago, 11 months left on the warranty. When I received it, I replaced the HDD with an SSD, and upgraded RAM to 16Gb, and installed Windows 10. Ever since I've had it, when on battery I would get random power losses. Exactly as described here: https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Lenovo-Y50-70-Sudden-Crash/m-p/2093711#M124398 The solution to that poster's question was to "reinstall OS because of NTFS error". Since there are multiple users complaining about the exact same circumstance, I can't believe that an OS reinstall will fix it. When it happens again, I'll get the dump file and event log entries and post them here.

Read other answers
RELEVANCY SCORE 56.8

I have a two week old Lenovo X1 Carbon 20A7 and from the beginning after simply got Windows7 initial setup with nothing else on, I noted that if I left it to go in sleep or Hibernate, when the lid was closed, upon opening it again, the notebook screen was black although the adaptive keyboard was active and the machine was pingable from the network. No matter what I did I could not get the unit to come back to life so I always had to press the power button until it power cycled to get it back. I noted that I was not alone out there and some reported the issue on earlier X1's Support suggested to send it back and were not helping much. They decided it is either hardware or configuration issue, and in both cases it required a return.  Because the issue was reported in the forums on earlier X1's I decided that it was probably software and I started by disabling all sleep modes only to find out it would still go to sleep. This is how I found out that if the sleep mode was disabled in Power Manager, it would automatically enable in Windows version of the power manager. Disable it in Windows and it would enable in Power manager... yeah - exactly; I had the same reaction.. Same thing with other power functions. So I de-installed Power Manager 6 and bingo, no more issues. But now I get non critical warnings  in Lenovo tools that I have no power manager software installed. Plus I don't get the extra features that are useful in PM6. ... Read more

A:X1 Carbon and Lenovo Power Manager 6. Random Sleep...

petren
 
Can you please tell me exactly the steps to reproduce this?
 
Is it:
1.  Leave system idle with lid open  (is AC attached or not?)
2.  System automatically enters sleep mode after XXX minutes
3.  Close the lid
4.  Open the lid
5.  Screen stays black?
 
Or is it something else?

Read other 9 answers
RELEVANCY SCORE 56.4

Hi everyone - I have 2 issues with my y510p (it's a little less than a year old, so with the warranty coming up I figured I may want to get some second opinions).The first is that recently, say within the last month or so, it has developed the habit of rebooting for no discernible reason and with no warning.  It will just snap to a black screen instantly.I've done a full refrresh of my Windows 8. I've run all the validation tools I could think of (hard drive/mem/OS files/etc.) There's nothing particular evident in my event viewer except for this in my system errors:'The description for Event ID 0 from source GeneStor cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.If the event originated on another computer, the display information had to be saved with the event.The following information was included with the event:GeneStor driver startedGeneStor driver started (2)'I believe they are connected because before the crashes started to occur the Onekey Recovery application would start randomly opening multiple instances of itself.' As an addendum, it also appear that I am getting kernal-power event 41The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.---- The other issue which may or may not be related is with... Read more

A:Lenovo y510P - Random Reboot and Power Button Issu...

So as a heads up for anyone else that might be encountering either of these issues - I called support just now and I'm sending it off for repair.  Bit of a bummer since this is my work machine (thankfully I have my t500 from college still kicking around to use in the meantime). Tech support was really nice and quick. Didn't make me walk through the diagnostics/troubleshooting I'd already done which is refreshing. Hopefully this is just a fluke because apart from these issues I really like this machine (and as I said, my thinkpad is rock solid.)

Read other 4 answers
RELEVANCY SCORE 55.6

Good morning, SF and BSOD teams:

I've been suffering from random BSODs on my Lenovo V570 laptop running Win 7 Home Premium 64-bit on numerous occasions. This issue currently springs up at seemingly-random times, although there might be some correlation with me trying music-related activities (e.g. opening WinAmp, Google Play Music, etc.). The on-screen BSOD information consistently mentions power management driver, hence the reference in this post's title.

Some history with this laptop: I purchased it new in Sept 2011 - no issues
Shortly thereafter, I installed Ubuntu with a full disk wipe, re-format, and re-partition
After frustrations with Linux, I reinstalled Win 7 with a freshly-purchased retail full license (e.g. not the OEM recovery disk)
Note: it was after this event that the BSODs started to occur
I've since reinstalled Linux and Win 7 at least one or two times, each time with a full disk wipe/format/re-partition and seemingly successful installation.

One additional note: during each of the Win 7 installs, it seems as though virtually none of the expected drivers are available. I have to manually install ethernet, wi-fi, graphics, etc. before the thing starts behaving as expected. Again, this was all using the legitimate retail full Win 7 install disk and drivers directly from Lenovo's support site.

In any event, I would greatly appreciate any help on this issue.

Thanks!
-Danny

A:Random BSOD - Lenovo V570 laptop - power mgmt driver

Welcome aboard.

Code:
kd> !irp fffffa8005af41c0
Irp is active with 10 stacks 9 is current (= 0xfffffa8005af44d0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8007c87060 00000000 fffff800034bab40-fffffa8005f74a10 Success Error Cancel pending
\Driver\usbhub nt!IopUnloadSafeCompletion
Args: 00051100 00000001 00000001 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8005dcf770

Args: 00000000 00000000 00000000 00000000
Is there any USB devices... Read more

Read other 1 answers
RELEVANCY SCORE 55.6

My pc open file automatically, then automatically shut down
when I running my pc, it create pop up sound then open file automatically
then pc get shut down.
watching any video file, this create more problem.
when i scan all of my hard drives but any virus or virus activity didnt appear.
My antivirus up to date besides i tried many type of antivirus as well.
please give me some suggestion as soon as possible.
what should i do?

A:My pc open file automatically, then automatically shut down

Boot into System Recovery Options to System Restore to a point before the problem began.

Establish a Clean Boot first and then work through the other Troubleshooting Steps for Windows 7, working in Safe Mode if necessary.

Keep us posted on your progress.

Read other 1 answers
RELEVANCY SCORE 52.8

Hey folks! Thanks for checking out my post, I've looked online, but couldn't find a solution, so I thought I'd make my own post. Some details: This laptop is an HP DV6-3064 ca. It was purchased refurbished about a year ago, and has had almost no problems to this point. I was at a friend's house using my laptop, and everything was working fine. Shut down, packed it up, took it home, pulled it out, pushed the power button, and nothing. I didn't leave it in the sun, or bump it on anything. Just brought it home and it wouldn't turn on, with no warning signs or anything. Now I looked into power issues and I can guarantee my battery as well as the AC adapter are perfectly fine. I also tried the hard reset but still get nothing. The light by the DC jack does not turn on when I plug it in. Now, I'm relatively tech-savvy, and since my laptop was no longer under warrantee I figured I'd check it out for myself. (Don't really have the resources to take it to a repair shop). The DC jack looked like it might have had some wear on it, so I ordered a new one from a reputable seller on eBay, replaced the old one, and nothing changed. I'm completely at a loss here. Weird thing is, when I have the laptop opened, and plugged in, I can feel the motherboard heat up a bit. Not sure if it's supposed to do that, but I know there is power going to it, even though the DC jack light still does not light up. If anybody has any insight, PLEASE let me know, and if you need any more info... Read more

A:HP DV6-3000 Getting NO power. No response from power button ...

Bannor,  The LED on the DC jack usually is an indicator of whether the AC adapter is working properly.  That light is on a different circuit and does not require a good system board.  If the light does not come on usually the adapter is bad. If you've already tested or replaced the adapter then the dc jack is the next step however when HP replaces this part in the repair depot they usually replace the entire board (with jack soldered on) at once.  You might consider replacing the entire board. Wes

Read other 5 answers
RELEVANCY SCORE 52.4

Hi everyone,
I have a Dell Inspiron 15 3000 series laptop, and while I was using it tonight it suddenly turned off.
I know it wasn't because of overheating, because the computer was cool to the touch right after it shut off.
All I had open was Skype, and I was watching a video in Windows Media Player.
The specs: 4th-gen i7 CPU, 8gb ram, 1TB HDD
Devices plugged in: Samsung 21.5" monitor via HDMI, Logitech G430 via USB, Logitech G302 via USB, Acer keyboard via USB, Blue Snowball via USB.
The laptop was on AC power and was fully charged when this occurred.

What could've happened?

A:Dell Inspiron 15 3000 series sudden shut down?

Could have still been an overheating problem. The CPU has autosense heat protection and will shut it down and may do that even if the case is not hot to the touch.

I see a lot of USB ports being used, is this your usual setup? If you are watching a video, the USB mic did not need plugged in.

Read other 2 answers
RELEVANCY SCORE 51.6

Before the problem occured my laptap working good. When I used the next day I power my laptap and it display black
no cursor and no text. Hardrive led blink one time and no more. No beeping heard. Cannot access bios setup.
What is the problem and how to fix it. Tried remove the battery and drain the power. Tried the ram testing and still have problem.
 

A:Lenovo 3000 G430

It could be a lot of things. but im guessing either a bad motherboard or a power supply problem.have it looked at so you will know what the exact problem is and then go from there.
 

Read other 1 answers
RELEVANCY SCORE 51.6

Hi, my GF's Lenovo 3000 V100 needs a new LCD and I have searched high and low for OEM info on the following FRU# LCD panel, 12.1-in. WXGA AG, Samsung 13N7184LCD panel, 12.1-in. WXGA AG, AUO 13N7182LCD panel, 12.1-in. WXGA AG, CMO 13N7180 I have been offered a Samsung LTN121W1-L01 LCD but can't determine if its compatible with her model. Can someone help here? If it were a thinkpad I would have no problem since there is actaully a whole wiki page dedicated to TFT LCD's found in thinkpad - would be nice to have the same for other models. With kind regards JBJ



Posts made by insomniac1971 is also mine.Thinkpads: T61, R61, R500

A:Lenovo 3000 V100 - Please help - new LCD

Welcome to the Forums JBJ! 
 
Please provide the Machine Type Model number.
Note: Please do not share system serial number here.
 
Let us know how you get on.
Regards,
Shashi
 
Tap that ?Star? button below to award a Kudo if I helped. If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

Read other 1 answers
RELEVANCY SCORE 51.6

I bought an all-in-one computer of Lenovo 3000 C3 series. I can´t find anything about bluetooth. Does that mean that this computer doesn´t have a bluetooth adapter embedded?  Or do I have to doenload aditional software? Or buy an usb bluetooth adapter?

A:Lenovo 3000 C3 and Bluetooth

did you check user manual?

Read other 6 answers
RELEVANCY SCORE 51.6

Having a problem with Laptop running XP, Lenovo 3000 C200-8922. I did a fresh install yesterday & updated to SP3. Under Device Mgr - Other Devices there is a ? mark on these items:

Audio Device on High Def Audio Bus
Base Sys Device
Base Sys Device
Base Sys Device
Network Controller
Video Controller
Video Controller (VGA Compatible)

Also, when I flip the switch for Wireless, no light & no wireless connection. I am hard wired right now & no Wireless Option. There is no sound at all. I've tried the Intel Chip set bios utility and even the Legacy Drivers. I am now locked out of the BIOS, not sure what the password is!

Thanks.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:16:06 PM, on 5/10/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Avast4\aswUpdSv.exe
C:\Program Files\Avast4\ashServ.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Java\jre6\bin\jusched.exe
C:\PROGRA~1\Avast4\ashDisp.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\system32\ctfmon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\agrsmsvc.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Progra... Read more

A:Lenovo 3000 C200

Read other 15 answers