Over 1 million tech questions and answers.

broadband device not detected

Q: broadband device not detected

i have a home computer. windows xp. i have a virgin mobile broadband chip that i have always been able to plug n to the usb slot on bck of computer and it pulls up the internet with no problems. i tried to get on the internet and it keeps telling me that the device isnt detected. i troubleshot,lol. and windows tells me to go to control panel, network connections, LAN or high-speed internet, the problem is i only see 3 g and local internet connection, please help me!

RELEVANCY SCORE 200
Preferred Solution: broadband device not detected

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: broadband device not detected

Read other 14 answers
RELEVANCY SCORE 50

System Information:
Windows 7 Home Premium
Processor: Intel(R) Core(TM)2 Quad Cpu Q8200 @2.33 GHz 2.4 GHz
Installed Memory (RAM): 8.00GB:
System Type: 64-bit Operating System
Dell StudioPC

I get the following error a large number of different times in the Administrative Event log. How do I track down what is causing the problem? The problem device is an external WD My Book 1 TB IEEE 1394 SBP2. I don't understand why there should be a paging operation on this device as it is used only as an external backup for the C: drive. It has been set up with no paging file.

NEW Info: I setup WD My Book drive to have a virtual paging file and guess what - The error messages stopped! Go figure!
If you need more information just point me in the right direction and I will post it.

Error Report follows:
Warning 12/5/2010 7:04:40 PM Disk 51 None
Log Name: System
Source: Disk
Date: 12/5/2010 7:04:40 PM
Event ID: 51
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: DaleDesktop-PC
Description:
An error was detected on device \Device\Harddisk1\DR1 during a paging operation.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Disk" />
<EventID Qualifiers="32772">51</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-12-06T00:04:40.216575500Z" />... Read more

A:Solved: An error was detected on device \Device\Harddisk1\DR1 during a paging operati

The indicated solution of creating a virtual paging file for the WD MyBook drive did not correct the problem. The problem resides in the IEEE 1394 (firewire) driver. Do the following (quoted from http://social.answers.microsoft.com...e/thread/42085c5a-4f15-4dcd-8a76-9a7860b526c2) to correct the problem stated above:

"Update to my previous post. I updated my IEEE 1394 (Firewire) controller driver from "LSI 1394 OHCI Compliant Host Controller" (1934ohci.sys ver 6.1.7600.16385 stock driver from Windows 7 64-bit) to "1394 OHCI Compliant Host Controller (Legacy)" (ochi1394.sys and 1394 bus.sys ver 6.1.7600.16385 also stock from Windows 7 64-bit).
This change seems to have resolved this issues described in my previous post in this thread. My external Firewire disk works normally now (no longer slow during large transfers) and the Warning ID=51 has not recurred (after two days).

To accomplish this driver change, here are instructions:
Control Panel > in control panel search box (upper right) type "device manager", run Device Manager (requires Admin authorization)
View > view by type, then expand IEEE 1394 Bus Controllers (by clicking the arrow)
Double click your 1394 OHCI Host controller (exact name may vary) to bring up "properties", and write down current driver name on Driver tab in case you want to go back later.
Driver tab > "Update Driver" > "Browse my computer for driver software" > "Let me... Read more

Read other 1 answers
RELEVANCY SCORE 49.6

I have a new X240. It has a sim card slot on the right side. I am running Windows 7 Enterprise 64 bit. it seems that the x240 does not recognize wwan hardware. I can't find it in the device manager. It doesn't connect to any network when I insert a SIM card. Also, no unknown devices show up in the device manager. I installed the following drivers in an attempt to fix the issue:-Ericsson N5321gw wireless WAN-Sierra Wireless 7355 - Gobi 5000 ... but no success. I also tried running commands in cmd window to check the status of the wwan:-netsh mbn sh int-netsh mbn sh cap int=* ... but I always get the same message:"Mobile Broadband Service (wwansvc) is not running" I am starting to think that having a sim card slot does not neccessarily mean that the x240 is Mobile Broadband capable. Any suggestion?  













Solved!

Go to Solution.

A:[SOLVED] Mobile Broadband hardware not detected in X240

@trinitxu wrote:
 
I am starting to think that having a sim card slot does not neccessarily mean that the x240 is Mobile Broadband capable.
 
Any suggestion?
 

It is only WWAN operable if it has a WWAN car installed.  Does your X240 have a WWAN card installed?

Read other 5 answers
RELEVANCY SCORE 49.6

Hi people.
So heres my problem, i was playing this game called Grand Chase, And i was trying to find a driver to play it, and i found this one called Intel® Graphics Media Accelerator Driver, and after i installed it , i started the game and i could play it, but it made my pcs icons,words and another stuff big, the size of the icons aumented, so i tried to install this other one called Nvidia, but when i tried to start the game it said "This game doesnt support your 3d", i deleted the Nvidia one and tried to install the old one but when i tried to install it, this message appeared :

Non-Intel device detected. Please contact the device manufacturer for possible updates.

What am i supposed to do?

i was playing that game with that driver the Intel one, but when i try to re-install it again that message appears.
 

A:Non-Intel device detected. Please contact the device manufacturer for possible update

The obvious answer is to use the correct driver.

But since you didn't tell us anything about your hardware thats going to make it impossible for us to tell you what you need to download.
 

Read other 1 answers
RELEVANCY SCORE 49.6

An error was detected on device\Device\harddisk1\D during a paging operation. This is logged frequently in my event viewer. Somtimes it is with "harddisk 2" . Is this my harddrive beginning to fail or is it an error with the external harddrive attached to my PC?

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz, x86 Family 15 Model 4 Stepping 3
Processor Count: 2
RAM: 2047 Mb
Graphics Card: NVIDIA GeForce FX 5500, 256 Mb
Hard Drives: C: Total - 476937 MB, Free - 300667 MB; H: Total - 1907726 MB, Free - 1764265 MB;
Motherboard: Gigabyte Technology Co., Ltd., GA-8S661FXM-775
Antivirus: CA Anti-Virus Plus, Updated: Yes, On-Demand Scanner: Enabled
 

Read other answers
RELEVANCY SCORE 49.6

I added a new 500 gig external drive to a server several months ago to use as a secondary backup device. We use a DAT drive as our primary.

I backup 3 boxes to this external drive, starting at 8:00 p.m., and allow 2 hours for each backup. I haven't gone back in the event viewer to see exactly when this started, but I get this message now at the times those backup routines start.

An error was detected on device \Device\Harddisk2\DR4 during a paging operation

There is only 1 internal drive in the server and it is HardDisk1. Number 2 is this Seagate FreeAgent USB drive.

Anyone have any ideas as to what that message really means? I can manually copy data to it and erase data from it.

I have noticed however; that some of my backups aren't executing at times on those 3 other boxes for what ever reason.

I'm wondering if this drive is going into a hibernation routine or something like that....

Thoughts?

TIA
 

Read other answers
RELEVANCY SCORE 49.2

What should be happening: I plug in my headset to my controller on my windows 7 x64 PC (wired controller)
and sound comes out of the headset and not the computer

What is happening: No new device shows in device manager underneath sound video and game controllers audio

Problem: not able to use headphones on my controller

How do i solve this problem? When I restart my computer or "scan for new hardware devices" nothing happens and i dont get a headset audio device showing up

And it also doesnt appear in volume control icon > right click > playback devices
so i cant enable it there even when (show hidden/disabled devices) is enabled.

A:Xbox One Headset Device not detected in device manager

Hi realflow100,

what USB port are you plugging in the Headset in? I've noticed that sometimes depending on if you plug the headset in a USB2 or 3 port matters for some devices.

What is the audio driver you have for the moment, if you haven't got the latest here is the Acer support download page for your PC:
Download Drivers and Manuals | Acer Official Site

Cheers
Boris

Read other 4 answers
RELEVANCY SCORE 48.8

Please pardon my naivete, but I really have very vague ideas about these sticks in terms of after purchase cost(activation? monthly?) and amount of internet time and usage(how much surfing it allows? can I watch hour/s long videos? Several times a day? Everyday?

T Mobile ZTE MF691 Rocket 3G 4G Webconnect USB Laptop Stick Modem AirCard HSDPA | eBay

Above link is an example(of several)e-bay listings of device.(stick).

NetZero is for a short time offering a year-long cost-free 4GB stick for a cost of the device. That's it.

PS: I am fully aware this topic has nothing to do with W7...but I really do not know where to go for this.

A:Mobile Broadband device

With those Adaptors it all depends on the tarriff/carrier as to what you get.

Normally a top up of say $10 will give you about 1-2gb of usage. Thats not a great deal of data when it comes to streaming videos, but will five you hours and hours of surfing.

I use my phone as a hotspot when im out the house, and id say i watch about 1-2 hours of youtube and netflixs a day, in a month that adds up to about 20-30gb of usage as an idea of heavy video streaming. But luckily for me i get unlimited usage on my phone with a fair usage policy of 1000GB a month.

Read other 3 answers
RELEVANCY SCORE 48.8

Yesterday, I did a scan of my network with WireShark 3.2.6  Scan was done on my hardwired Ethernet connection. I am somewhat new to advanced wireshark and I do not know everything there is to know but I am in the process of learning.
While looking at the results of a short scan I saw some unsettling IP Addresses that were appearing on my network. I do a lot of schoolwork online and I need to setup Windows 10 Professional's Firewall to block this IP Address or possibly even a range of
IP Addresses. 
Problem is: When I do searches with keywords such as "Blocking an IP Address with Windows 10 firewall" I end up receiving results that are intended for businesses or results that are meant for a Windows Server.
I need an understandable solution to this potential security problem. One that I can use Microsoft tools to fix and not some 3rd party app if possible.
My system:
Windows 10 Professional build 18363.1016
MS Office 365 Enterprise Edition subscription through my school
Dell Optiplex 790 with the latest BIOS update
16GB RAM
Dual drives  SSD system drive and Mechanical ATA drive for data storage.
WireShark 3.2.6 results
Source: 52.109.12.55    Destination: My private IP Address for my PC. 
Protocol used: TCP   Note: 3 instances.
Below is my PC sending out an 89 byte message to 52.109.2.55   4 different times.
Source: My Private IP,     Dest:
52.109.12.55,  Src Prt: vpad 1516,&nb... Read more

Read other answers
RELEVANCY SCORE 46.8

Hi, 
I have dell latitude E7470 with windows 10. I have problem when I want to install dell dw5811e driver. I download latest software driver from dell support, run it and wait them to finish. Afterward software driver is configuring mobile broadband device, it always freezes at 37% with message "Fail error 82". I try with older version of software driver. It is still the same. Could anyone suggest how to resolve the problem.
regards,
Pat 

Read other answers
RELEVANCY SCORE 46.8

HY Everyone! I have a problems some driver on my Elitebook and the biometric login with fingeprint not working Please help me!!! PCI\VEN_197B&DEV_2392&SUBSYS_161C103C&REV_30 (System tool) USB\VID_03F0&PID_3A1D&REV_0000 (HP hs2340 HSPA+ MobileBroadband) ACPI\VEN_HPQ&DEV_0004 (Unknow device) Thanks! 

A:Elitebook 8460p GPS, mobile broadband and unknow device driv...

Hello You can run Software Download Manager to get the Drivers Updated please check the below link http://www8.hp.com/us/en/ads/clientmanagement/drivers-bios.html?jumpid=va_r11260_go_clientmanagement... Regards, NAV.




Thanks & Regards,Naveed

Read other 2 answers
RELEVANCY SCORE 46.8

I purchased a mobile broadband module per factory spec for my laptop so I got the lt2522 Novatell broadband module. I did not have a sim yet but wanted to make sure the install and drivers were present and working before I ordered the sim. I installed the module without issue using factory antenna wires already present in the slot marked WWAN, I installed the drivers listed for my laptop on hp website (sp60048 Novatel Mobile Broadband 3.18.30.1) Driver installed without any issues and broadband module showed in device manager as "Enabled and working correctly" under each line of "Modems, Network Adapters, and Ports. I opened HP connection manager and the Module was powered on and it just said "No Sim" So I assumed that the Module install and driver install was completed and functional. I called Verizon and paid to have a Pre-activated Sim mailed to me.  2 days later I got the Sim, inserted it, opened HP connection manager and ever since all I can do is turn the power on and off to the module, but whenever the power is turned on it reads "disabled in device manager" which I know is not true, I have rechecked device manager a dozen times, removed and installed module and driver package multiple times. Even reinstalled module and drivers without Sim and it still says "disabled in device manager". I searched the net and here at HP for solutions/updates/information, and haven't really found anything helpful, just a couple noteworth... Read more

Read other answers
RELEVANCY SCORE 46.4

I have recently installed Windows98se. Now in Device Manager listing, Under Other device, it showed an Unknown device listed with a yellow exclamation on it. So, I remove that device and restarted my pc. After that on startup, it showed that this wizard will search for drivers for this Unknown device. But I could not find the drivers for this device. So I selected : Display list of devices.

In that I selected Other devices. On clicking next, it showed an Unknown device in the left and Unsupported device in the right box.

I clicked on the Cancel button. Please help...

Apoorva.
 

A:other device detected in device manager

Read other 9 answers
RELEVANCY SCORE 46

I have a desktop pc with XP SP2 which is connected to a Qwest Actiontec 701WG wireless modem. I have a laptop connected to the internet wirelessly. However, I used to be able to have the home networking operating correctly to where on my MSHOME network under WORKGROUPS both computers were listed and file sharing worked fine. I have image files of my C drive on the laptop and when I restore the basic windows image file and then put in my usual programs everything works fine for a few weeks and then I can only get the internet connection to work. If I reinstall the basic image file again then everything works for a while.
With all my regular files installed when I try to set up the MSHOMEnetwork on the laptop using netsetup and ICS, my laptop shows the modem as "unrecognized device". When I reimage the C drive to the basic setup & use the netsetup it shows the name of the modem (Actiontec 701 WG) in ICS and, as I mentioned it will work.
Both computers are running XP sp2. I also have the same laptop as a client pc at my office where I have ethernet cable connections to a desktop pc, and that also runs fine.
I am jsut wasting my time be oinstalling the basic xp installation on the laptop as after I have finished installing my regular files and runing it for a few weeks I'm going to have the same problem again.
I have also tried netstup wizard after having paused protection on Kaspersky security suite, and turned off Windows Firewall and that made no differen... Read more

A:Solved: client pc not recognizing (broadband connection) device in netsetup wizard

Read other 7 answers
RELEVANCY SCORE 45.6

I've been trying to fix a problem with my Lenovo T460S for months now, with hours spent on it and no success. The thing pops up with "Configuring mobile broadband device" every time from a fresh start, which takes about 30 seconds to complete. I've read this is to do with the SierraEM7455 onboard, but there is only one driver available for this on the website, and this does not fix the problem.  Does anyone know how to fix this? I'm getting very frustrated with it.

A:T460S "Configuring Mobile Broadband Device" every time on power up (Sierra EM7455)

HiThere is a solution in another thread where you've posted short question about issue with em7455 - disable Selective Suspend Mode drivers.Navigate to the folder where em7455 drivers package from Lenovo site is extracted (usually c:\drivers...). There should be Lenovo7455DriverSetup installer and Configuration.ini file. Open the latter in the text editor like Notepad. Add the following string in the 1st section [Default Values]:SS=0It'll disable SS mode drivers installation. Save the file, reinstall the drivers. I'd advice to remove existing modem drivers firstly.

Read other 2 answers
RELEVANCY SCORE 43.6

When trying to use Media Player to copy music to a recordable cd, I get the message "No device detected." And yet when I went through the troubleshooter, it said the burner was working properly.

I imagine this would also prevent me from saving some of my digital pictures to disk.

Any ideas???

Thanks in advance. You guys have helped me immensely in the past.
 

A:No device detected

Read other 6 answers
RELEVANCY SCORE 43.6

Before, my USB device was detected normally. However, after a few weeks, it was no longer detected normally.

Normal:
Plug and play.

Problem:
Plug and cannot detect the device not even by device manager.

Solution made:
Reinstalled Drivers (Did not work)
Restart/Boot the computer while the USB Device is plugged (Worked)

Somehow, I have to restart the computer everytime I need to plug this device and I tried using other USB devices and they all worked however, this device alone is not working well enough even though its working fine on other computers.
 

A:USB Device not detected

what type of divices is it
 

Read other 2 answers
RELEVANCY SCORE 43.6

whenever i connect external hard drive or pen drives to my laptop ,at first it detects and installs the software correctly,but after i remove it and reenter it it does not shows any usb device.
on opening the device manager the usb device with name "usb root access" shows yellow icon with some sort of error.
 
after uninstaliing the driver an restarting the laptop it again works nicely but again the same problem.
 
pls tell me how to solve this.
 
my laptop is http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&docname=c03587885

A:usb device not detected

Possible that your USB chipset is bad, and you need to send the unit off to HP for Motherboard replacement.  What is showing up in Administrative tools > Event Viewer?  If you want to spend $50, you can get the Passmark USB loopback tester and software, but really not worth it in my view.

Read other 2 answers
RELEVANCY SCORE 43.6

Have tried a few places with this one before, hoping it tuns up trumps here. Have installed a Logitech USB Quickcam, Win98, USB on a 2 port PCI card, so no BIOS problems(hopefully). Everything seems to go in perfectly, except when the software tries to access the cam, it can't find it, and gives up saying it is attached to another application. USB diagnostics say all is OK and Device Manager is all clean and tidy. Logitech try to be helpful, but don't seem to know much. Any suggestions?
 

A:USB device (almost) not detected

Read other 8 answers
RELEVANCY SCORE 43.6

Hello everyone,

So, two days ago I was rendering a video on an editing program, and a notice came up saying I was out of memory. My external HD was in the computer at the time, because I put clips from there into the videos that I render.

Since then, USB devices that previously worked are working anymore (external HD; printer), besides my mouse. Whenever I plug one into the USB port, it comes up with a yellow triangle with an exclamation mark on the bottom right of my screen saying, "One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."

Does anyone know how I should go about fixing this?

I have a Dell Inspiron E1705 laptop.
Thanks,
Matt
 

Read other answers
RELEVANCY SCORE 43.6

Every time i connect my new Zune to my computer, i cannot get WMP 10 to detect the device so i can sync. I checked the usb status and it said it could not be used because it was in safe removal mode. It told me to disconnect the reconnect the device. I did but i still did not get response from WMP

Please if you have any advice, i would greatly appreciate it

My comp. is a W XP 2002 eMachine
 

Read other answers
RELEVANCY SCORE 43.6

Hello everyone,
No USB device seems to be getting detected on my machine when I plug in a flash drive or an external hdd I get the distinctive sound from my speakers that an USB device is plugged in but nothing is showing up in "My Computer". I went through the event logs and found that Windows is failing to load the USB device (check image in attachment logs.jpeg). What is causing this problem ? I am stuck right now. Recently I installed iTunes, so I though it might be causing this problem but I uninstalled it even then the problem persists. I don't want to format my machine just because of this small problem. Is this a driver conflict ? How do I find out why windows is all of a sudden failing to load the USB devices ? I have uploaded a copy of the saved logs detailing this failure(logs.zip). Thanks.

A:No USB device is getting detected

Go into device Manager and uninstall all the USB controllers! Reboot the computer and see if this helps.

Read other 6 answers
RELEVANCY SCORE 43.6

why oh why will my computer not recognise my dv camcorder. windows movie maker wont, roxio refuses. i'm at a loss.

thank
jeff
 

A:no dv device detected

Are you using usb or firewire?
 

Read other 3 answers
RELEVANCY SCORE 43.6

recently my hp dv9812us crashed and won't seem to workwhen i turn it on and it loads up and no operating system would appeari used the bios hard drive test and it just says no ide device detectedi took it out and connected using a usb to my other pc and i can access the drivei put it in the secondary slot and it would show up in the bios so i'm wondering wat could be wrong with it here?someone help plzz and thank you

A:no ide device detected

Have you tried reinstalling it in the laptop? Sometimes a loose connection can cause the problem. It could also be bad, not bad enough that it won't show up as a secondary drive but too bad to boot an OS from. If that is the case, you will have to replace it and boot from your Recovery Disk set to reinstall Windows.
 

Read other 9 answers
RELEVANCY SCORE 43.2

Windows is now saying that I have no audio device. I have onboard sound, and another sound card installed. What I usually do is just disable my onboard sound, and enable my creative sound card. That was working fine for months. But now, windows acts like I have no sound at all. I tried disabling the creative sound card, and enabling my onboard sound but no luck either. The drivers are all installed properly and nothing has changed, but it won't recognize any audio device or some reason. Any suggestions?
 

A:No audio device detected?

prOwler, You might try removeing both drivers from the device manager and rebooting.
 

Read other 1 answers
RELEVANCY SCORE 43.2

drivers r fine as far as i can see, but no sound from speakers or anything else is heard. says "no audio device detected"
here is my hijackthis log.

Old Yesterday, 08:39 AM #1 (permalink)
gingergib
Registered User

Join Date: Apr 2007
Posts: 1
OS: xp

no audio device hijackthis log
no sound being output at all on my pc for few weeks now. tried drivers but im useless when it comes to sound.. heres the hijackthis log

Logfile of HijackThis v1.99.1
Scan saved at 16:35:18, on 09/04/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\CTsvcCDA.exe
C:\Program Files\ewido anti-malware\ewidoctrl.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\UAService7.exe
C:\WINDOWS\System32\dmadmin.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\GSICON.EXE
C:\WINDOWS\system32\dslagent.exe
C:\Program Files\TrojanHunter 4.6\THGuard.exe
C:\Program Files\Dell Photo AIO Printer 922\dlbtbmgr.exe
C:\Program Files\Dell Photo AIO Printer 922\dlbtbmon.exe
C:\Program Files\Java\jre1.5.0_09\bin\jusched.exe
C:\Program Files\PowerISO\PWRISOVM.EXE
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Creative\MediaSource\Detector\CTDetect.exe
C:\Pro... Read more

A:no audio device detected

Hi, gingergib!

My name is Nick and I will try to assist you with your problem entitled "no audio device detected ".

I stress to inform you, that at this stage, your Hijack This log will not be reviewed quickly because it is in the wrong section for Hijack This Logs. I cant review it for you either.

If you would like to get your log reviewed, then you will need to post this topic in the Security Section. I will provide some information below on your issue, though. If the procedure is found to not work, then you may need to Personal Message a moderator to move this topic for you, or post your Hijack This Log in the Security Section.

First, here is my procedure:

--------------------------------------------------------------------------------------------------
Device Manager
Here, we will be checking to see if there is any errors with the audio devices you have installed.

1. Right click My Computer (should be on desktop, or Start Menu).
2. Select Properties >> Hardware tab.
3. Click the button that says Device Manager.
4. When Device Manager is open complete the following steps:

Expand the category Sound, video and game controllers
Please specify what is listed there.
Also note for any (!), or (?) next to those items.
--------------------------------------------------------------------------------------------------

Best Regards,
Nick Tompson - Microsoft MCSA
 

Read other 3 answers
RELEVANCY SCORE 43.2

when i go onto the xbox one app and enter a party it tells me that there is no mic being detected

Read other answers
RELEVANCY SCORE 43.2

What the heck does USB device over current detected and how do I solve this problem in 16 seconds???
 

A:What is USB device over current detected mean?

It means that device is drawing to much power
from the USB bus.
Does the Connected USB device have it's own
power supply?
If so,make sure it is connected and working.
 

Read other 3 answers
RELEVANCY SCORE 43.2

My audio device is not being detected all hardware and drivers are there and are functioning but still no dice. What can I do? I a running xp and the hardware is realtec97 audio

A:audio device not detected

Are there any yellow question marks or exclamation points in Device Manager?

Read other 1 answers
RELEVANCY SCORE 43.2

Sorry if there is already a thread about this but the ones i read were for laptops mostly and mine is for a desktop.

Recently i did a update for windows media player codecs and i had to restart my computer for it to complete as it was booting back up it went to a black screen with the message "BOOTMGR is compressed press Ctrl+Alt+Delete to restart" and i did for about 30 mins. but nothing happened then a friend told me i had to use the Windows Vista Recovery disk but my computer has no disks what so ever it came with vista pre-installed on it already so i had to use my dads old windows xp sp1 to find info and a lot of my answers kept pointing to a website called neosmart with a vista recovery torrent so i downloaded it and burned it onto a cd with imgburner but before i inserted the disk they said change the BIOS to cd rom drive first i did that but no luck then i accidentally did a huge mistake and disabled everything: hard drive, optical drive, usb, floppy,cd rom, then i saved it now a new message pops up saying "A bootable device has not been detected please refer to product guide" ect. and i asked for help one last time and kept seeing "press F2 or F10 before start up" i keep doing that but nothing happens i can't do anything with it, it just keeps going to the same screen like i said before i am using a separate computer so is there a way to help my computer comeback or is it doom forever? also if it helps my spec is: eMachines W3611 Wind... Read more

A:No bootable device not detected help

go back to the BIOS and reset it, if you are unable to get to the BIOS you will need to reset it:
http://www.wikihow.com/Reset-Your-BIOS

Just be careful, also if you don't understand what the article is saying the just Google "reset BIOS"

Read other 1 answers
RELEVANCY SCORE 43.2

Hi I have tried everything and have gotten no where if anyone can help you would be a hero in my house. I recently installed a fresh copy of XP sp3 on a new hard drive for a computer I just built. Everything works fine but my on board audio is not being recognized. I have installed the drivers from my motherboard disc. I have looked at the device manager and under sound, video and game controllers my on board sound is not listed. There is a yellow exclaimation by other devices PCI device. I have tried installing the sound driver to that and it will take it but does not restore sound. I have even reinstalled XP and I still have this problem. If anyone has any ideas please help!!! =(

MSI MS-7302 Motherboard
AMD X2 6000+ 3.1
onboard audio
ATI 4850 HD Sapphire
4 gigs ram
XP PRO SP3
 

A:No Audio Device detected

First, it's not clear to me from your description whether you have BOTH an onboard device AND an installed PCI sound card. If you have an installed PCI sound card -- the onboard device should be disabled in the BIOS -- then reinstall your drivers for the PCI sound card.

Be sure you are getting UPDATED drivers from the sound or motherboard site -- not those that originally came with the mobo since it is pre SP3. In any case the device should be detected in the Device Manager -- whether the drivers work or not. If no detection -- this is either a hardware or BIOS corruption issue.
As a first shot at this I would go through the standard procedure of shutting down, opening the case, all power removed -- and reset the CMOS.

You can do this either by removing the battery for a couple of minutes -- or with the jumpers if you can find them.

If the battery is more than 4 years old -- it might be well to replace it. You will need to reset the time in the BIOS after doing this.

The second option would be to risk a BIOS flash for the motherboard model.

If both those fail to resolve the problem you can safely assume the onboard hardware is buggered -- and you should buy a cheap PCI sound card and install it

In fact I would probably do that to avoid a risky BIOS flash If I were unsure of the outcome -- which can be fatal if it fails.
 

Read other 1 answers
RELEVANCY SCORE 43.2

i have compaq presario c550em notebook.I downloaded the driver for audio device but when i tried to install it message appeared"NO DEVICE DETECTED FOR THIS DRIVER".I am using XP.Whereas sound device works properly on windows VISTA.What should I do?Any help....!!!!!

Read other answers
RELEVANCY SCORE 43.2

Hi I'm having problems with my laptop...for some really strange reason since I installed Itunes almost every time I turn it on it says that no audio device is detected? I've stopped using Itunes on my laptop but it still keeps happening.

I go through the troubleshooting...the device manager says there are no problems that everything is working correctly. It has been suggested that I install the codec drivers again so I followed the instructions I was given and then rebooted. Most of the time it works and the sound comes back but this last time it hasn't happened. It's still saying no audio device detected.

I haven't got any external speakers or anything installed it's just the sound system that came with the laptop.

Any help would be really appreciated.

Thank you )
 

A:No Audio Device Detected

Hi,

Reinstall your chipset driver...reboot and then reinstall your audio driver
 

Read other 3 answers
RELEVANCY SCORE 43.2

I'm trying to replace the hard drive in my old XP PC but I'm thinking I'm in over my head. The initial bios pages say "Master: no device" and when I try to set up Windows from CD using the fastbuild facility it says it cannot complete set up because no hard drive is detected. But another bios page scanning the IDE shows the new hard drive as functional, so it can't be that I haven't connected it properly. Any ideas how I can configure it?
 

A:No master device detected

Read other 8 answers
RELEVANCY SCORE 43.2

I recently moved into a new case, the NZXT Tempest, upgraded to a new video card (Palit GTS 450) and a new PSU (Corsair TX 650watt). After all of this, the mute symbol is always displayed and i cant change it. WHen scrolled over it says "No AUdio Output Device is Installed"

I am planning on clean wiping Windows 7 tomorrow, but does anyone know anything else I can do to fix it?

I was just going to buy a new sound card, but I want the headphone/microphone jacks on the front of my case to still work.
 

A:No audio device detected

Did you check the BIOS to make sure that the onboard audio is connected?
 

Read other 5 answers
RELEVANCY SCORE 43.2

i switched my computer on the other day to find that my speakers weren't detected on my computer. im not sure what to do to make them work. i checked the device manager and no sound device was there, i have also tried my device cd and that wont work on the computer. Please Help!!!
 

A:Audio Device Not Detected

Reinstall the driver for the sound card.
 

Read other 1 answers
RELEVANCY SCORE 43.2

Let me say, I've found a lot of interesting facts on this website, and am glad I am a member of it. Also Thanks in advance to any help.

I have Windows XP SP3. My audio works and then doesn't work. Now my audio flat out doesn't work at all. I went to the control panel, then to audio and it said no audio device detected. I have an internal sound card. There is a yellow sign with an exclamation point in it next to the Windows Wave Audio Mixer. I tried to update it, but I don't have my Windows disk, or my motherboard disk, or even know what company made my mother board for that matter. I'm not the most computer savy person. With that said, what can I do correct this problem? Thank you
 

A:No Audio Device Detected help

We will have to know what model your motherboard is. Is your computer store bought? If so, what is the make and model of it. Can you open the case and give us all the numbers/ letters you see printed on the motherboard?
 

Read other 9 answers
RELEVANCY SCORE 43.2

OK. I guess I posted in the wrong forum. If I understand my instructions , I am suposed to create a new topichere with Highjackthis logs. OK , so I have now & I hope someone can help me on this because it's driving me nuts with my Windows XP with SP3. An yes I followed the Windows trouble shooter and scanned my computer for viruses, but the problem persits.My previous post & Highjackthis log can be found here http://www.bleepingcomputer.com/forums/ind...p;#entry1237143 Ok here is my problem with my Realtek Audio Driver.***************************************************************************Under Device Manager / Sound, Video and game controllers-------------------------------------------------------------------------------------------------------Under Audio Codecs When I right-click properties , I get only 3 options Disable & Uninstal Options do not show.Update Driver : When I try this option it says can not find a better driver than what I have.Scan for hardware change : Nothing happens with this option.Properties : On General tab it says Audio CodecsDevice Type : Sound,Video and game controllersMaufacturer : (Standard System Devices)Location : UnknownThis devise is working properlyDevise usage is blank & I can not access it.----------------------------------------------------------------------------------Legacy Audio Driverssame problem----------------------------------------------------------------------------------Legacy Video Capture Devicessame pr... Read more

A:Need Help ! Audio Device Not Detected

Sure would be nice if someone would help me out.

Anyway I was able to find all of this garbage on my computer on my own.

****************************************************************

Stop-Sign Threat Scanner found

Win32.Backdoor/Keylogger (Type_Backdoor)

d:\i386\cmnclim.dl_._eac_qt_:cmnclim.dll
c:\windows\i386\cmnclim.dl_._eac_qt_:cmnclim.dll

WebtrendsLive Spyware Cookie

C:\Documemts and Settings\Owner\Cookies\[email protected]

Trojan.WinREG.AutoRun.d: Virus
c:\windows\system32\tmp.reg._eac_qt_

**********************************************************

Malwarebytes found

Registry Data Items Infected:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Security Center\AntiVirusDisableNotify (Disabled.SecurityCenter) -> Bad: (1) Good: (0)
-> Quarantined and deleted successfully.

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Security Center\FirewallDisableNotify (Disabled.SecurityCenter) -> Bad: (1) Good: (0)
-> Quarantined and deleted successfully.

**************************************************************

Avira Antivir found

Virus or unwanted program

'ADSPY/BaRedir.A [adware]'
detected in file 'C:\WINDOWS\system32\bae.dll.
***************************************************************

SuperAntiSpyware found

Adware.Tracking Cookie
C:\Documents and Settings\Owner\Cookies\[email protected][1].txt

Adware.Jraun/WinEssential
... Read more

Read other 3 answers
RELEVANCY SCORE 43.2

Hello, I'm trying to troubleshoot someone's computer, and I've run into a wall. Windows seems to not detect the sound card when I go to Sound Properties, but shows up all fine and dandy in Device Manager. I've looked all over the internet for solutions, and I think I may have narrowed it a bit. The "Windows Audio" service is marked as Automatic, but doesn't start unless started manually. Further info; computer tends to get hit with virus/spyware relatively often (new user at the controls).
 

A:No Audio Device Detected

Read other 16 answers
RELEVANCY SCORE 43.2

The sound device on my laptop is not being detected since I installed Windows XP. It was working perfectly fine before. I downloaded all the drivers that were applicable for the laptop from this website: http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK
Most of the other drivers work except the sound driver that is recommended for the machine, it installs perfectly fine and asks to restart the machine but when it restarts there is still no sign of the sound device being detected.
 

A:Sound Device Not Detected

Read other 16 answers
RELEVANCY SCORE 43.2

Hello Since a recent update of windows 10 my audio has stopped working.  I have re-installed conexant audion and this is running.  However it says no audio devices are detected.  I'm not sure what to do now? Thanks for the help Kathryn

Read other answers
RELEVANCY SCORE 43.2

Hi all,

So, the story goes like this.

I have the HP touchsmart tm2, and I purchased an SSD a few months ago. I did a clean install on the SSD, and installed all the drivers (including the bluetooth drivers). Since I didn't need to use bluetooth before, I didn't bother checking to see whether it worked or not. All I know is that before I did the clean install, bluetooth worked on the old installation.

I recently purchased a bluetooth device and wanted to connect it to my computer. However, when I tried looking for the bluetooth module under device manager, I could not find it. I tried looking under the "adapter settings" in the network and sharing centre but to no avail.

I thought I installed the incorrect drivers, so I tried installing them again. When I tried that, an error message popped up saying that I need to turn on my bluetooth device first before attempting to install the driver.

The bluetooth module itself is not broken, nor is it disconnected from the computer. I tried looking under the BIOS, and the bluetooth FCC ID field had a value for it.

I even tried opening up my laptop and replugging the module itself. When I unplugged the module, the bluetooth FCC ID field in the BIOS would disappear, only to reappear when I replugged the module.

I tried looking in the BIOS for any options pertaining to the bluetooth module, but could not find any.

Does anybody have any idea what is wrong?

(P.S. the bluetooth module is made by Broadcom)
 

A:Bluetooth Device Not Detected

Do you have a bluetooth on/off program, on some of the laptops I have used there is often an option to turn on the bluetooth - when OFF its does not show up in the device manager

there maybe a HP wireless assistant that also manages the bluetooth

service manual
http://h10032.www1.hp.com/ctg/Manual/c02262878.pdf

shows the bluetooth controlled by the wireless switch - but on my older HP Laptop - the HP wireless assistant controlled the bluetooth and the wireless separately
 

Read other 1 answers
RELEVANCY SCORE 43.2

Hi,
I have a Dell Dimension 3100 Pentium(R)4 524 computer with windows xp home edition. Just purchased a Canon MD 120 camcorder and was advised at the camera shop that I would need to get a fire wire card installed so that I can copy the digital video to my PC. The computer store sold me Ulead computer PCI card and installed it for me, leaving me to run the install disc when I got home. I did this and tried to connect my camera to the computer with the cable supplied but all I get is an error message telling me that "No capture device detected". I cant find any mention of either the PCI card or the camera in device manager. Reading through the specs for my computer it says . No floppy drive and media card reader but i do not know if this means anything. Can anyone help me sort out the problem area?
Thanks
 

A:No Capture device detected

I know this sounds like a stupid suggestion but is the camera in the correct mode. I know my camera has to be the correct mode to work and the manual says very little about it.
 

Read other 3 answers
RELEVANCY SCORE 43.2

My PC this morning has suddenly and without any warning, gone wrong and cannot be started up.

I am getting the American Megatrends (AMI) warning " USB Device Over Current Detected, system will shut down in 15 seconds"

Even after unplugging everything, including even the monitor, the PC is shutting down after 15 seconds.

What is the cause? Has the motherboard failed? If so can this be replaced without loosing data ( I know this is on the HD so should be ok).

Any advice please?
 

A:USB Device Over Current Detected??

Have a look in the motherboard manual for USB jumpers. Most of the threads I found about this problem were caused by a loose jumper on the mobo or one that had fallen off.

It can also be caused by a damaged USB socket. Check that none of the PC's USB sockets are damaged.
 

Read other 3 answers
RELEVANCY SCORE 43.2

Hello,

Recently, I had to reinstall windows on a new hard drive. After installing all of my drivers, (and I've done this a hundred times, I know how to get the drivers for my motherboard), windows updates (I can't count how many times something bad happened to my computer because of windows updates), etc. and I discovered the computer will not detect a sound device.

I've reinstalled the usual drivers from my motherboard's cd and their website, I've tried updating the BIOS, I even reset the battery. But in no way will my onboard audio device be detected.

I do not have any exclamation points or any signs of missing or corrupt drivers, however I did notice a lot of my drivers have (2) instances and some of them say Unknown location. Even though I keep installing the correct drivers, they don't seem to show up in the device manager (even hidden devices.)

Maybe the onboard sound card died? I don't know but there are two of them on the board and neither of them work.

The windows audio service is started, I've restarted it many times. The device is enabled in the BIOS. The drivers won't update any further and if I wanted to install ones such as "Audio Codecs", or "Legacy Drivers", I can't because there is no Uninstall option. The devices in the list:
Audio Codecs
Audio Codecs }these two are unknown location and do not have an uninstall option.
Legacy Audio Drivers
Legacy Audio Drivers }these two are unknown l... Read more

Read other answers
RELEVANCY SCORE 43.2

hello everyone, well I know this is not new problem but I tried already evreything I saw in the previous Q/A, well I have a probook 450 G3 HP laptop with Win 7 pro 64, all the drivers works fine now expect for the audio driver I still not able to get it through. the bios is updated to 01.06 V, 

Read other answers