Over 1 million tech questions and answers.

yoga 700 restart problem

Q: yoga 700 restart problem

Hi I just bought the new yoga 700 but its having trouble restarting. When I click restart the screen turns off but the keyboard stays lit up and so does the light beside the power button. It says like this until I hard reset it by holding in the power button. This only happens with restart shut off is fine. Does anyone know how to fix this or is it a hardware problem? ps. All drivers and bios are up to date

RELEVANCY SCORE 200
Preferred Solution: yoga 700 restart problem

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: yoga 700 restart problem

It could be stil completing Windows update in the background, which may take time to complete, therefore, leaving only the keyboard on. Can you check this?

Read other 3 answers
RELEVANCY SCORE 44

I've got a problem. This laptop starts over after reboot, within 2 minutes. Gets the error: Windows has encountered a critical problem and will restart in one minute.

MS Security Essentials thinks it has SIREFIR. But wont clean. I cant get MALWAREBYTES to run.

Would hate to reinstall... Attached is FRST log.

What's my next step?

Scan result of Farbar Recovery Scan Tool (FRST written by Farbar) Version: 25-07-2012 01
Ran by SYSTEM at 25-07-2012 11:22:11
Running from F:\
Windows 7 Enterprise (X86) OS Language: English(US)
The current controlset is ControlSet003

========================== Registry (Whitelisted) =============

HKLM\...\Run: [GrooveMonitor] "C:\Program Files\Microsoft Office\Office12\GrooveMonitor.exe" [30040 2009-02-26] (Microsoft Corporation)
HKLM\...\Run: [IgfxTray] C:\Windows\system32\igfxtray.exe [141848 2009-09-23] (Intel Corporation)
HKLM\...\Run: [HotKeysCmds] C:\Windows\system32\hkcmd.exe [173592 2009-09-23] (Intel Corporation)
HKLM\...\Run: [Persistence] C:\Windows\system32\igfxpers.exe [150552 2009-09-23] (Intel Corporation)
HKLM\...\Run: [Adobe ARM] "C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe" [843712 2012-01-02] (Adobe Systems Incorporated)
HKLM\...\Run: [AppleSyncNotifier] C:\Program Files\Common Files\Apple\Mobile Device... Read more

A:Restart loop: Windows has encountered a critical problem and will restart in one minute

Please do the following:Open notepad (Start =>All Programs => Accessories => Notepad). Please copy the entire contents of the code box below. (To do this highlight the contents of the box, right click on it and select copy. Right-click in the open notepad and select Paste). Save it on the flashdrive as fixlist.txt start
HKLM\...\Run: [] [x]
C:\Windows\Installer\{afa9be9c-6e25-844d-0d21-e6f80b2448ce}
C:\Users\Project 9\AppData\Local\{afa9be9c-6e25-844d-0d21-e6f80b2448ce}
endNOTICE: This script was written specifically for this user, for use on this particular machine. Running this on another machine may cause damage to your operating systemNow please enter System Recovery Options then select Command PromptRun FRST (or FRST64 if you have the 64bit version) and press the Fix button just once and wait.The tool will make a log on the flashdrive (Fixlog.txt) please post it to your reply.While you are still booted into System Recovery Options run FRST.

Type the following in the edit box after "Search:" so it looks like this:

Search: services.exe
Click Search button and post the log it makes to your reply.Reboot Normally.

Read other 2 answers
RELEVANCY SCORE 43.6

Hello, We just purchased a Yoga 12 for one of our administrators in our district.  It has a core i7 proc, 256SSD, 8GB RAM, Windows 10 x64.  While it works fine most of the time, when the system restarts, it starts to load windows but the screen goes black.  None of the keys on the keyboards work.  The computer itself is powered on, but there is nothing on the display until you touch the screen.  The lock screen then comes up, but you still can't use the keyboard until you swipe up the lock screen.  I thought maybe some driver issue but the event logs aren't showing anything.  The laptop isn't in tablet mode. Any ideas about this? thanks, Michael

A:Yoga 12 Black Screen on restart

In response to customer reports of black screens after restart on Yoga 12 laptops running Windows 10, Lenovo has released a Service TIP.
 
It can be found here: https://support.lenovo.com/us/en/documents/HT116649
 
Please note the tip lists the screen swipe as a work around, pending a permanent fix.
 
Thank you,

Read other 2 answers
RELEVANCY SCORE 43.6

Turned on my laptop this morning. Worked fine. Went to try and use my printer to scan something to my laptop. Turned on printer and came back to my laptop not working. It is just turning on and off again. The power button and keyboard backlight just flash on and off repetitively.  Tried searching forums for a solution. Heres what I've tried so far:Laptop not connected to power sourceUnplugged batteryUnplugged CMOS (CR2016) batteryPlugged laptop in and still getting same restart issue Ive tried holding down power button and small button above it to no avail. I also tried hooking it to power source with main battery disconnected and CMOS battery connected. Always same issue: repetitive restart with no boot. Printer has been turned off throughout the whole troubleshooting process but worked fine with the wifes laptop after mine pooped the bed.  Anyone got a solution or idea?  

Read other answers
RELEVANCY SCORE 43.6

Recently on two occasions my Yoga 920 has shut down after I got up and was no longer using it.    I was not on line and and the laptop should have entered sleep mode.     Windows 10 pro.   When I returned to the laptop, I could not restart it and on both occasions, the bottom felt extremely hot.  Not so hot that I couldn't touch it but much hotter than I've ever felt it before.  Certainly uncomfortablly hot if was sitting on your lap. After about 20 minutes it restarted and ran normally.    It appears that some action is causing it to run and overheat.   During the period when i could not restart it, I unplugged it from power and noticed that the small led on the power button was blinking.    I called Lenovo support after the second incident and have scheduled  to send it in for service.   I ran Lenovo Companion software and checked for updates but it says everything is current. Just reporting in case anyone else has seen this. Thanks.  

Read other answers
RELEVANCY SCORE 43.6

Hi, my fingerprint reader is not working after some time without restart. After restart I can use it without any problem for some time, when the computer wakes up. But suddenly when I want to sign in after wake up the reader is not working. The led is not blinking and it doesnt react for my touch. I have to sign in with password. Then I have to restart Windows 10 and it start working for some time again. Thx for help. 

Read other answers
RELEVANCY SCORE 43.6

Hello, I had to restart my whole lenovo yoga 3 with intel core 15. When I did this all of the applications on my device ended up being uninstalled. I have a list of all the uninstalled apps and I was wondering which ones I should reinstall? I do not have any of the lenovo apps anymore, another problem is that my laptop no longer changes in to tablet mode and the keys do not lock when I manually put it into tablet mode. Anyone know how to fix this?   Thank you. 

Read other answers
RELEVANCY SCORE 43.2

I have a Dlink 890L router and it works perfectly with my Yoga 3 Pro and every other wifi device - except my Yoga 2 Pro. The Yoga Pro 2 will connect and work fine, but when I close the laptop or power down and then open or power up again, the the Yoga 2 Pro will not connect. If I restart (power off) the Dlink, then the Yoga 2 Pro will connect again without any problem. As soon as the Yoga 2 Pro is closed, powered down or goes to sleep, and opened again it will not connect. I have updated every thinkable driver on the Yoga 2 Pro, so what to do ....

Read other answers
RELEVANCY SCORE 43.2

I like to keep my C930 in sleep mode. But sometimes after wake up, the laptop cannot connect to wifi (it cannot find surrounding wifi, and I cannot turn the wifi off). I will need to restart the computer to make the wifi work again. But when I restart the laptop in this condition, It cannot restart normally, it keeps restarting several times and until entering into repairing mode. I need to turn off the computer and open it again. It happens several times. It is hardware or system problem? And once I waked the laptop and screen didn't work. But it never happens again. Do I need to reinstall the computer or send it to repair?I just bought it for a month.

Read other answers
RELEVANCY SCORE 42

I was coding on Excel VBA, I ran a Range("cell").End(xlDown) line on 1 row (mistake) and it hang my laptop for 30 seconds.After that I closed the excel file and my laptop started acting weird. My battery was low with 20% battery at that time, so I plugged my USB C charger BUT it didn't charge (first time happening). Then I decided to restart the laptop, but it became stuck on the "Restarting" orange screen for around 1 hour. I hold on to the power button for 3minute and it doesn't do anything. Now, the screen is turned off, then 15min laters, the keyboard backlights turned off, now only F1 mute button is lit up. I suspect my laptop's process is still running... and my power button still doesn't work to turn on/off the laptop. What should I do?

Read other answers
RELEVANCY SCORE 42

After updating brand new Yoga 910 with WIndows updates, AND firmware 1.39.00.00 Windows asks to restart this one every time. Even it installed several other times the same update, it keeps on telling me it has to restart to finish.Then once it restarts, says during the boot below the Lenovo image - system updating, but it never updates it. And then again in Windows asks for restart, ,... just a vicious loop!How can I remove this firmware update for good?

Read other answers
RELEVANCY SCORE 41.6

My Yoga works fine with Thunderbolt 3 eGPU when i put it on when Notebook is running.If I try to restart or turn Notebook on with eGPU Dock I get no signal for screen. Not on Notebook Display and not on external Display.  There is no way to get a signal on any Port or to change output. The only Way then is a Hard Reset. After that everything works finde, even the eGPU.I tried this with Razer Core X and HP Omen Accelerator and Razer support said its a Problem with the Thunderbolt3 Driver.Anybody had this Problem too?I tried Drivers from Lenovo and from Manufactures.   

Read other answers
RELEVANCY SCORE 41.2

Hello, One of our ThinkPad Yoga goes into an endless loop when attempting to reboot. The O/S was upgraded from Windows 8.x (as shipped) to Windows 10 (MS free upgrade) a long time ago and there have been no previous issues restarting. I believe the version of Windows is 10 Home Edition. The HDD is almost fully utilised (1 gig free). Irrespective of the options taken, on boot up the screen flickers what looks like a CMD window in the top left of the display twice very quickly, then after the Lenovo splash screen is displayed:Preparing automatic repairThen Diagnosing your PCAutomatic RepairYour PC did not start correctly Restart just continues in the loop irrespective when continue or repair is selected. I?ve taken Advanced options:Continue ? Just continues in the loopUse a device ? I?ve tried creating another rescue boot disk from another yoga without a CD Rom ? attempting to create it on a USB stick but the create repair disk in Windows 10 Pro doesn?t allow USB stick as an optionSystem restore point shows me 4 states however when selecting any I get the message the backup drive cannot be foundI can access a CMD promptStartup repair - couldn?t repair your PC  see log file c:\Windows\System32\Logfiles\SrtTrail.txt.  I?ve attached this file that I copied to USB via the CMD Prompt.  I have renamed the file from txt to doc. The error message in the log file states The operating system version is incompatible with Startup RepairHow... Read more

Read other answers
RELEVANCY SCORE 40.4

Two ThinkPad X1 Yoga Gen2 TabletPCs will successfully boot into Windows 10 just fine from a hard poweroff.  But once in windows, if i choose Restart, it will hang at the "LENOVO" BIOS  level boot up logo with "To interrupt normal startup, press Enter".   Stuck at Lenovo BOOT BIOS initialization screen, right before handoff to the Operating System. "To interrupt normal startup, press Enter" At this point, pressing ENTER does not work.CTRL-ALT+DEL causes the screen to change shade for a moment, but effectively does nothing.Changing the UEFI settings to diagnostics results in black screen.Holding the power switch to force a poweroff, waiting a few moments, and then powering on results in a successful windows startup.  DevMGMT.msc does NOT see bluetooth and there is "Unknown USB Device (Device Descriptor Request Failed)" entry under "Universal Serial Bus controllers".  I have run all automatic updates via "Lenovo Vantage" and the manual TPM update.   I can boot into the firmware setup and have had it revert to factory defaults and reverted to factory defaults for all security settings.   I even tried the Win10 repair startup problems, but it says it cannot fix this.   

A:ThinkPad X1 Yoga Gen2 does not Restart, requires hard power off. Stuck at Lenovo boot logo.

It looks to me like you have a faulty hardware issue or a serious driver issue. Try the Lenovo recovery to put the device back to the factory windows install. If that fails, I would think you have a hardware issue.

Read other 2 answers
RELEVANCY SCORE 37.6

Hello everyone,

Insert any USB device to this computer, Computer keeps restarting and it wont stop doing that until I remove the usb device. I tried with all the usb ports on this computer and problem is the same. Even by hooking up a usb keyboard or mouse, computer wont get to the login screen. it keeps on restarting. It wont even go into 'safe mode'.
Anyone have any clue whats going on and the solution to fix it?

My appreciations in advance!.
 

A:Insert a USB device to this computer, It is going to restart and restart and restart

scroll down to 400, might help.

http://www.kellys-korner-xp.com/xp_tweaks.htm
 

Read other 2 answers
RELEVANCY SCORE 35.2

Lenovo - 2-in-1 15.6" 4K Ultra HD Touch-Screen Laptop - Intel Core i7 - 16GB Memory - NVIDIA GeForce GTX 940MX - 256GB SSD - Pearl black (Model: 80V50009US) purchased 10/28/2016. Brand new straight from the box is unable to connect to the home Wi-Fi. It sees the Wi-Fi and knows the pw is correct, but it fails to connect and says try again. What am I missing? I've talked to Lenovo support 2x and Verizon/Fios support 2x and neither has the answer. I am about to return the machine to Best Buy. Any suggestions?
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

A:Yoga 710 - Wi-Fi problem with new Yoga - Please he...

The laptop is a YOGA 710-15IKB and the wi-fi adapter is Qualcomm Atheros QCA61x4.

Read other 1 answers
RELEVANCY SCORE 34.8

Your PC ran into a problem and needs to restar

A:Your PC ran into a problem and needs to restart

sus3 wrote:Your PC ran into a problem and needs to restarHi, The best resolution for that is by performing a REFRESH. Note: By performing reset you will loose all of your files in the process. Recovery Manager asks you if you want to reboot and enter the recovery environment. Click OK.Figure : Confirm System Recovery (HP Recovery Manager Summer 2014 and earlier)Figure : Confirm System Recovery (HP Recovery Manager Fall 2014 and later)The computer restarts. If the recovery partition on the hard disk drive is functioning correctly, the Choose an Option screen displays. Click Troubleshoot.Figure : Choose an optionOn the Troubleshoot screen, click Recovery Manager.Figure : Troubleshoot screenOn the operating system selection screen, click Windows 8.1.Recovery Manager opens.Figure : Operating system selection screenOpen Minimized Recovery.HP Recovery Manager Summer 2014 and earlierUnder I need immediate help, click Minimized Image Recovery.Figure : HP Recovery Manager main screenHP Recovery Manager Fall 2014 and laterUnder Help, click Minimized Image Recovery.Figure : HP Recovery Manager main screen Follow the on-screen instructions to perform a recovery. For more information, see the HP support document Performing a System Recovery (Windows 8). note:If the recovery partition on the hard disk drive is not functioning correctly, you need to run a system recovery. http://support.hp.com/us-en/document/c03483233#AbT0




"Education costs mo... Read more

Read other 1 answers
RELEVANCY SCORE 34.8

I am having a problem when I select the restart button at shutdown. The computer will restart and go to the normal password window. At this point, the system locks. You have to push the reset button on the case or completely shut the system down via the power button. The HJT forum suggested I run this command: sfc /scannow. It requests for me to insert the Windows XP installation disk. The PC was purchased for me in another state. The Windows XP software was not given to me at this time.

What do I need to do to fix this issue?

Sonya

A:XP Restart Problem

is there a recovery partition on the computer,what brand is it
you cannot do much without the disk if there is'nt

Read other 1 answers
RELEVANCY SCORE 34.8

Win 7 build 7260
Acer Aspire X3200
Athlon dual core 4050e
NVIDIA GeForce 8200

This problem occurred with RC too (which is why I 'upgraded' and reinstalled):

If the PC does a 'Restart', it gets stuck on the 'Starting Windows' screen (i.e. the animated Windows logo fails to appear). I then have to hold down the power button to shut down. When I restart manually, the 'Starting Windows' screen and animated Windows logo appear fine, but then I get the choice to either 'Launch Startup Repair (Recommended)' or 'Start Windows Normally'. I choose 'Start Windows Normally' and all is well.

Any ideas on why I can't do a 'Restart'? (Shut Downs are fine btw)

Phil

A:Restart problem

  
Quote: Originally Posted by PhilSE1


Win 7 build 7260
Acer Aspire X3200
Athlon dual core 4050e
NVIDIA GeForce 8200

This problem occurred with RC too (which is why I 'upgraded' and reinstalled):

If the PC does a 'Restart', it gets stuck on the 'Starting Windows' screen (i.e. the animated Windows logo fails to appear). I then have to hold down the power button to shut down. When I restart manually, the 'Starting Windows' screen and animated Windows logo appear fine, but then I get the choice to either 'Launch Startup Repair (Recommended)' or 'Start Windows Normally'. I choose 'Start Windows Normally' and all is well.

Any ideas on why I can't do a 'Restart'? (Shut Downs are fine btw)

Phil


first welcome to SF
did you do a clean install or upgrade?
At some point you might want to consider doing a repair. It might get rid of the restart problem
If you want to try and diagnose it. go to start type event in search and click on the event viewer. see if there are any errors there relating to this problem, and if so using the snipping tool upload a snip of a couple.

Hope this helps

Ken

Read other 2 answers
RELEVANCY SCORE 34.8

Greetings,

I have a problem, I'm new here I hope this is the right board to post it.

Pc loses power and restarts, this happens mostly while I'm watching stuff on VLC player, sometimes while doing nothing.

never happened while playing games.

I did a stability test for a few minutes and I'm posting the results. Maybe someone can spot something out of the ordinary.
http://i.imgur.com/X29m3HB.jpg

The way the pc restarts makes me think its a voltage problem. But I'm no expert so I'm not sure.

my spec:

http://i.imgur.com/dlZl64K.jpg

any help is appreciated

Regards.
 

Read other answers
RELEVANCY SCORE 34.8

Whenever i open a folder containing video files the computer freezes the cursor will not move. then the computer restarts its self and there is not way i can stop it doing this. Any one have any ideas what might be wrong?
 

A:Restart problem

Read other 12 answers
RELEVANCY SCORE 34.8

Recently I've been having a problem with my PC: it restarts for no apparent reason, especially when I initiate some task such as opening a new webpage or program. It started a few weeks ago and I thought nothing of it, as my PC has a tendency to miraculously find its way into--and then back out of--the weirdest situations. But it got to the point on Friday at which I couldn't use it at all. So, thinking it may have been a virus of some sort, I went ahead and formatted my hard drive. I was running only one hard drive with an OS, so if there was a virus it would be on there, and a format would solve my problem. I soon found that the problems were persisting, and soon it got so problematic that I couldn't even boot the computer up at all. The first time I would start it it would tell me that my CPU frequencies were badly adjusted before and ask me to reset them. Then I would do that and when I saved and exited, the computer would leave me with a blank screen. Fiddling with the BIOS, I eventually figured out thtat setting the CPU-RAM frequency ratio to 1:1 instead of "auto" let me get farther. Once I had got past the initial boot screen, I was presented with this message:

TRAP 00000006 ==================== EXCEPTION ====================

tr=0028 cr0=00000011 cr2=00000000 cr3=00000000
gdt limit=03FF base=00017400

cs:eip-0008:00404964 ss:esp=0010:00060E8C errcode=0000
flags=00010086 NoCy NoZr IntDis Down TrapDis
eax=00000081 ebx=00000005 ecx=0000A500 edx=... Read more

A:restart problem

Read other 16 answers
RELEVANCY SCORE 34.8

The problem started when I reformatted my computer. All went smoothly up until I tried to install WoW(World of Warcraft), where it kept getting an error on the third disc. After doing some reading on WoW forums about installation problems, I found a common error was a RAM problem and that I should copy all the install files to the HD, and install from there. I do this, but now the computer restarts about halfway through the installation. (The computer also restarted while browsing the internet trying to install with cd's). The computer did have some problems with restarting when I first got the computer, but then it stopped and never restarted spontaniously again until after the reformation. So far (from advice I found on other similar posts on this website) I've tried changing the RAM frequency to 166mhz, down from 200. I've also tried moving the two sticks of ram around (2x256), from their original position (1 & 3) to slots 1 and 2. This didn't work. Then I tried switching the two sticks, which didn't work either. The next step I'm going to take is to try and put one stick in at a time, in each of the three slots. If that doesn't work, I'm going to grab a stick of ram from my other computer, and try it in the problem computer to see if its a problem with the actual Ram sticks. Anyone have any idea why my computer is randomly restarting (only during the installation of WoW, and while browsing the internet).

The computer has an AMD... Read more

A:Restart problem

Read other 16 answers
RELEVANCY SCORE 34.8

Dear sir
i am saud alam working as an IT assist eng. I have a problem in a client machine whenever i try to restart xp machine it gets shutdown by itself. unable to restart the system. will u plz help me.
with thanks
saud alam

A:restart problem

Hello saud alam

1. At which point of the bootup process does it shut down?
Is it after the manufacturer`s splashscreen, or after the XP logo, or where?

2. Have you tried booting into Safe Mode?

3. Has anything just been installed or updated?

4. Have any changes at all just been made?

5. Are there any error messages?

.

Read other 3 answers
RELEVANCY SCORE 34.8

Hello,

I've AMD Athlon 3600+ on Asus A8N-E Motherboard with 1GB RAM.
I've installed Win7 a couple of weeks ago and it worked just fine until yesterday, when the restart problem appeared: when I try to restart the machine, it shuts down all programs and windows, but it won't restart the hardware - it hangs on the black screen, when the monitor displays "no signal", but there's no actual restart. On the first time when I push the restart button on the PC nothing happens, and only on the second push the system restarts.

I don't even know if it's a software problem, or my motherboard tricks me...

Thanks in advance!

A:Restart problem

Hi rainbringer, welcome to the forums.

Firstly what software have you recently installed? More importantly, AntiVirus, some have been known to halt the Shutdown/Restart process. Also, what build of Windows 7 are you using?

This info could be invaluable when it comes to helping solve your issue




Jeff

Read other 6 answers
RELEVANCY SCORE 34.8

My computer occasioanlly restars itself, i would be using the cumputer and then it jsut retarts without warning or anything, after i relogin i send an error message to microsoft and they say it because im missing some update and they tell me to update it but there isnt that update for my computerit says 10/100 Ethernet Adapter (an983.sys)

can anyone help me?
 

A:Self Restart Problem

Read other 6 answers
RELEVANCY SCORE 34.8

I have recently been having a problem with restarting my computer. It no longer restarts whenever I click Restart or when a program wants to automatically restart it, it only shuts down completely. I have Windows XP and first noticed this happening after installing Wintasks, and a new downloaded program called TuneUp Utility. I removed both these programs but it made no difference. Has anyone got any idea what could be causing this?

A:Restart Problem

Use the Windows System Restore utility to restore your system state to its previous working condition.

To access System Restore

click start/programs/accessories/system tools/system restore

Choose a restore date from before the problem began.

Read other 2 answers
RELEVANCY SCORE 34.8

Whenever i attempt to use my video driver in more then a standard way (viewing a video, playing a game like warcraft 3) the computer flickers and restarts. I turned off restart at system failure, and the error message was stop 0x00000050 or PAGE_FAULT_IN_NONPAGED_AREA. The associated dll file causing the corruption is sisgrv.dll, which i believe is my video driver. I tried to reinstall the video driver of mobo manufacturer website, but it did not help at all. The processor is an amd athlon xp 2800+, 1 gig of ram, asrock k7s41. I bought the computer several months ago and it had been working find up until now. I ran a pc doctor thing (pc mighty max, the demo version) and it gave me some errors, the only severe one is that theres a corrupt start up file in the system32 folder (dumprep 0 or something to that effect). You have to pay to have it repair the problem, so i havent done that yet. Any help would be greatly appreciated. Thanks.
 

A:Restart Problem

If the problem is limited to a dll file in the system32 folder, you can enter your windows disk, boot from it and go into the recovery console.
Do a copy of the file from the disk and write over ther corrupt file, this should fix that much of the problem.
 

Read other 1 answers
RELEVANCY SCORE 34.8

DESPERATE NEED FOR HELPReceived an HP 15 Notebook Pc in February of 2016.Was researching birthday gifts for the husband last night, and when I come back to do further research, I keep getting a screen that states," Your PC ran into a problem and needs to restart. We'll restart for you.If you'd like to know more, you can search: ntsf_file_system" (or fat_file_system)"I'very done some research and hear that this is similar to the blue screen of death...My windows disc that I keep reading that I need was pre-installed on the computer when I got it, AND I have a lot of important files on this computer (ie. Family photos including my sons birth, important work files, etc)I've never been so stressed out over a computer, before...I have a project for work on this thing that is due on tuesay and I cannot even make it passet this stupid screenAnd when I attempt to call into HP support, they are closed due to the time and the holidyIs there ANYONE who might be able to help me or provide me with advice?I can't take it in to a repair shop either because due to holiday... theyre closed. And I hardly have enough money to get by until pay day!PLEEAAASE help?

Read other answers
RELEVANCY SCORE 34.8

My HP PC has been having an odd issue these past few days. The computer will start and load then quickly flash a blue screen telling my that my PC ran into a problem and needs to restart, then it will go to a screen where it says it is preparing automatic repairs and then finally it will go black shortly after, with the computer still running. I thought it was a hard drive issue, and I purchased a used one from the local technical store and installed it, but this time I got a screen saying there was no boot disk has been detected. Where is this issue coming from??

A:PC ran into a problem and needs to restart

On the old hard drive, mash F8 as soon as the computer starts booting. A prompt will come up, select "Safe Mode".

Read other 2 answers
RELEVANCY SCORE 34.8

Every time i start a game or 2 and more programs at once my pc restarts,i've tried many things and they haven't worked...Pls Help
1st file is before debugging and 2nd is after debugging minidump, i hope it helps..
Cheers

A:PC restart problem

Run --> DRIVER VERIFIER - Windows 7 & Vista

System information needed --> BSOD Posting Instructions


jcgriff2

.

Read other 3 answers
RELEVANCY SCORE 34.8

Hey all,

Whenever I install a program that reboots (offers to and I select yes) the computer, or whenever I use the start menu to restart the computer, it restarts, but when I get to the login screen, it's locked up, can't move the mouse or anything. I hit the restart button on the front panel and everything is fine. Any ideas as to what it might be?
Thanks,

Vince
 

A:Restart problem

Read other 6 answers
RELEVANCY SCORE 34.8

Hi Everybody
I Am Using Hp Envy Dv6 7273ca with Windows 8 That Came Pre-Installed In My Laptop And It's been 5-6 Months and Everything Is Working Flawlessly..
Today Something Very Strange Happened when I Tried Restarting My Laptop It Went On To the Screen Where it Says "RESTARTING" But It Never Restarted it stuck on to it like 4-5 minutes Then i had to Manually Shut It Down..
The Second Time It Happened When I Was Shutting Down My Computer And same Happened It Stayed On "Shutting Down" Screen for 4-5 minutes Then Went On To a Black Screen for 2 minutes and it restarted even though I Chose Shut down Option..
One more thing when it restarted it showed an error YOU PC RAN INTO A RESTART PROBLEM
Any Help Would be Really Appreciated

A:Restart Problem

Hi there,

Is your F8 function enabled, if not please follow this Tutorial?

Then, logon to Safe Mode and see if you're able to log on without any issues.

Read other 7 answers
RELEVANCY SCORE 34.8

Hi,For about 3 months now my laptop keeps restarting at random, sometimes several times in a span of few minutes, sometimes it?s ?restart free? for several hours, but then it happens again and is accompanied by a loud pop. I?ve tried everything that I could think of (reinstalling system, drivers etc), but nothing seems to help. The problems seem to escalate when I run games, even those that do not require powerful specs such as old rpgs. One thing that I can think of that could have caused this is that I used to have a lot of tabs opened in chrome and that could put a strain on the laptop. I understand that this is probably not enough to come up with a solution so please tell me what kind of data should I supply.  Thank You

Read other answers
RELEVANCY SCORE 34.8

Hello My computer spontaniously restarts when i do a disk clean up, virus scan or any type of scan as well as when i play games... if i uncheck the restart option availaible a blue screen comes up.. but i've read many of this restart problems and all sums up to be the ram my DDR is 512mg but in my computer specs it only reads 384mg is this normal.. can this be causing the problem?
Mircosoft Windows XP Home Edition
Version 2002
Service Pack 2

AMD Athlon 64 Proccesor
3300+
2.41 GHz, 384MB of RAM(my actual RAM SUPPOSE TO BE 512)
 

A:Restart WIth a (might be) problem HELP please

Read other 7 answers
RELEVANCY SCORE 34.8

What a Problem !?

I Dont Know Reason. How-to Slove It ? I Dont Like This Blue Screen : (

A:Your PC Run into a Problem And Needs to Restart

we need more info about you computer ,make ,model ,processor .ram ,ect ect ,and how old it is ,anything you think might help with solving you issue

Read other 4 answers
RELEVANCY SCORE 34.8

I am experiencing random restarting with my pc, it is not the sasser.exe or w/e other ppl get cause i dont get any warning when it does it, juss bam black screen then reboot. I origionally thought it was b/c my power supply wasnt big enuf for my video card, but i juss recently purchased a new power supply 300w which meets the specs of my vid card. The pc has been reformatted 3 times and the problem hasnt changed each time everything is secured tight inside the system i have checked multiple times, so i dont think it is shorting out, any ideas or things i can try would be awesome. :)

A:pc restart problem

what spec is your card?
your 300watt probably pumps out 200 - if that.

Read other 2 answers
RELEVANCY SCORE 34.8

Hi. hope this is in the correct place.

Whenever I install software and it says in order to complete the install you must restart your computer, the system will not restart untill I press the shutdown button in order to turn it off and back on again.


A shutdown occurs and a screen comes up with the option to press F2 to goto set up. This screen then goes away and re-appears without the option visible. the proccess then just hangs until I press the off button then turn the pc on again when it re boots normally and all is ok.

The same thing happens when clicking on "restart" from the start button.

The system will boot up ok from cold and everything else on the pc is "normal" The problem occurs whether Hibernate is on or off (I normally switch this off) and whether sleep is activated or not.

windows 7 64bit service pack 1 installed fully updated.

Any ideas appreciated

A:restart problem

Run SFC -SCANNOW Command and if necessary a Repair Install if you can locate an installer with SP1 (not slipstreamed), otherwise you'd have to uninstall Windows 7 Service Pack 1 (SP1)

Read other 6 answers
RELEVANCY SCORE 34.8

I have a AMD Phenom II X2 550 3.10ghz, for some reason it is not allowing my pc to restart, when i choose and click on restart my pc closes down and it turns back on but the monitor stays off and i have to turn it off by holding the power button. I was in the bios settings overclocking it to 3.4ghz and i saved the settings and closed bios and the pc restarted ok, i then tested it by restarting a few times and it was successful, so i went back into bios and put the settings back to normal and closed bios and guess what the same problem.

To fix this, all i done was go back into bios and changed the multiplier and voltage option from auto to x15.5 3.10ghz (which is the default multiplier and speed etc) and closed bios and restarted happily without any more hassle. When i have multiplier and voltage set to auto the default is x15.5 3.10ghz.

Any ideas ppl?????/

A:My restart problem.

I now understand why this happened.

Read other 1 answers
RELEVANCY SCORE 34.8

Hello i previously posted a restart problem in the following link, http://www.techsupportforum.com//mic...-restarts.html
and i found something new info, so i was wondering if any1 can help me?

"i ran sfc /scannow, but no problems were found and i have my computer connected to the internet via an ethernet, i unplugged it and run several programs that made my pc restart and they worked fine. so i assume is the ethernet card, can this be solve by switching place, or do i need a new one?"

A:Hello, Please help, Restart Problem...

First I would try to reload the NIC drivers. Go into the Device Manager, find the entry for the NIC, right-click it and select uninstall. Reboot and see if this helps. If not, go the the NIC manufacturer's website and download the newest drives and use them.

If those don't work, buy a new NIC ... they are cheap.

Read other 1 answers
RELEVANCY SCORE 34.8

Hi,  I purchase this Acer Aspire E 15, model E5,573G-76NF,  in Singapore June 2015. This laptop come with a Windows 8 and I subsequently upgrade it into Windows 10 when it launched.  This works well for a few months until 2 months ago it started showing this blue screen of 'Your PC ran into a problem and needs to restart'. Yesterday, I faced this issue again and NO LONGER can get into the desktop screen. Here are the situation, once startup, the screen with ACER logo came alive, after running, next screen appear is this blue screen. After it restarted, under the acer logo, a "Preparing Automatic Repair" will appear, next screen appear again to the deadly bluescreen "Your PC ran into a problem and needs to restart. We'll restart for you.". Under the message, here are the list of issue which appear randomly on the blue screen after numerous restart: SYSTEM_SERVICE_EXCEPTIONKERNEL_AUTO_BOOST_INVALID_LOCK_RELEASEMEMORY_MANAGEMENTKMODE_EXCEPTION_NOT_HANDLEDDRIVER_IRQL_NOT_LESS_OR_EQUAL (rdyboost.sys)DRIVER_OVERRAN_STACK_BUFFERIRQL_NOT_LESS_OR_EQUAL  Since purchase, there was no CD provided, I have prepare a USB flash drive, using MediaCreationTool.exe from Microsoft website to create installation media, enabling me to boot. However, this does not worked. Next, I use a windows 10 CD rom to boot the laptop, same issue, it doesnt work.Next, I try press Alt+F10 when boot, under the Acer logo, it appears "P... Read more

A:Your PC ran into a problem and needs to restart. (...

you press Alt+F10 at boot, are you able to enter windows recovery? to be able to boot from USB or DVD, enable F12 boot menu on BIOS, then at next boot press F12 and choose your bootable media. http://community.acer.com/t5/Knowledge-Base/Windows-10-Installation-Recovery-Media-Creation-and-Use/...

Read other 5 answers
RELEVANCY SCORE 34.8

Hi..I m confusing with my XP pro due to restart, in diffrent time intervals..My board is Asus P5ld2 SE and grafix Geforce 7300 LE ..All my drivers are up to date..I m using StopZilla 5.0 and it catchs the above trojan.win32.Mal!gen and removes (i.e. it says ) ..but while rescanning it founds the same malware..how can I solve the problem..thanks..the error code is given below..

BCCode : 1000008e BCP1 : C0000005 BCP2 : BF812673 BCP3 : B149D620
BCP4 : 00000000 OSVer : 5_1_2600 SP : 3_0 Product : 256_1

A:XP pro restart problem..

Welcome aboard Download Security Check from HERE, and save it to your Desktop. * Double-click SecurityCheck.exe * Follow the onscreen instructions inside of the black box. * A Notepad document should open automatically called checkup.txt; please post the contents of that document.=============================================================================Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory sizeClick Go and post the result.=============================================================================Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop. * Double-click mbam-setup.exe and follow the prompts to install the program. * At the end, be sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish. * If an update is found, it will download and install the latest version. * Once the program has loaded, select Perform quick scan, then click Scan. * When the scan is complete, click OK, then Show Results to view the results. * Be sure that everything is checked, and click Remove Selected. * When completed, a log will open in Notepad. * Post the log back here.Be sure to restart th... Read more

Read other 4 answers
RELEVANCY SCORE 34.8

Hello. I have an Asus A8n SLI deluxe mobo. with an AMD athlon 64 3700 2.20 ghz cpu. I just built this computer but am having troubles. The computer starts up fine. However, the computer will not restart, when i attempt to restart from windows, the monitor and keyboard turn off and i can hear the computer still running. THen i have to turn the entire computer off manually. It will turn back on, but no response from monitor and keyboard. I then have to turn it off again. And the only way to turn it back on with the monitor and keyboard working, is to take out the mobo battery. It does not turn back on without taking out the mobo battery. When I turn off the computer from windows, it shuts down fine. But i have to keep the mobo battery out for it to all start backup again. Also, when I attempt to go into the BIOS setup andmake changes, when I press Exit and Save changes the monitor and keyboard shut off but the computer is still on. If I press exist and discard changes then it continues to start up perfectly. Does anyone have any idea what could be wrong? Any help would be GREATLY appreciated!!!!! Thank you
 

A:restart problem please help!!

Hello and welcome to techspot

I think most probably is your BIOS settings problem arise because when you restart the computer, the computer are entering BIOS settings and probably the settings were screwed so u need to reset it (by removing the battery).

Have you checked your BIOS settings? Any weird values or options there?
It might be a gpu settings error in the bios.
 

Read other 6 answers
RELEVANCY SCORE 34.8

Hi guys ,

My pc seem have restart problem ! I dont have shutdown problem . Just when i click restart or after install solfware i need restart it just dont restart itself .

I have SuperAntiSpyware installed only .

Im Vista user .

Lg

Read other answers
RELEVANCY SCORE 34.8

hello everyone here is my problem: i am setting the display to turn off after 10 min so every time i wake up the display i see the massage ( your pc run into a problem and need to restart ) anyway for now i am setting it to never turns off until i fix this problem the problem started after i updated my drivers using driver reviver i guess

A:pc run into a problem and need to restart

I'm the same message, and I've also noticed a couple things out of place...
First is that I'm getting lousy internet speed, and I know it's not just the browser. I like playing games on Steam, and this was where I noticed the laggy internet.
Normally, I get somewhere around 1.8-1.9 Mb/s. Last time a few of my games updated, they got up to around 300+ Kb/s and dwindled down to literally nothing. I'm going to run a virus scan, but just in case it doesn't turn anything up, I find it wise to share.
Next, is that I was looking through the problem reports, and found a report for a driver that seems to be otherwise non-existent on my laptop. (Mine's an ASUS K55A, by-the-by.) The driver was Intel Rapid Storage Technology Driver. I looked through programs and settings, Device Manager, and even through my entire C drive! (With the hidden files and folders showing, of course.)
I looked it up, and apparently, it's getting problems everywhere. Maybe I'm looking at the wrong sources, but my laptop runs without it, so I'm not entirely convinced that I need to install it.
Anywho, I'm wondering if that's anything to do with it in my case, or not.
Also, I figure I should share that it's usually when I leave my laptop open with any more than two items running. It doesn't seem to matter what Items, although Chrome is usually in the mix.

Read other 1 answers
RELEVANCY SCORE 34.8

Hi iam hope some body can help me

Ive just finished building a new computer and everything went fine but about 3 days after it was up and runing i recived my internal card reader.

I installed it and every think semt fine but after in stall of the card reader every time i do a restart the computer switchs off when it comes back on it is not booting from the hard drive it is trying to boot from the dvd drive.

I have unpluged the dvd drive and tryed again but it will still not try and boot from the hard drive but if i switch the computer off all togeather and then restart it it boot from the hard drive.

I have even tryed a system restore and that has not helped.

So any help or suggestions would be greatful

by the way i have removed the card reader

thank you in advance

A:restart problem

did you check your bios and make sure the harddrive is set for your first boot drive?
are thay ide drives ? if so you have to set them up as (master and slave) the harddrive being the master drive..

scrooge

Read other 3 answers