Over 1 million tech questions and answers.

Wifi Card, Router, or Settings issue?

Q: Wifi Card, Router, or Settings issue?

I have a toshiba Satellite L500D that seems to have issues connecting and reconnecting to wifi signals.

At my house it only connects once in a blue moon and when it does connect it cuts off and disconnects after a couple minutes of use. When I reboot it, it doesn't connect automatically and I have to search for my ssid and connect that way.

I brought it to my fiends house to test, and it seems to run smoother. No random disconetions but It still wont automatically reconnects after a reboot. (actually it does on a restart or a reboot within a couple of minutes, but anything longer and it doesn't remember and reconnect automatically)
I have the auto reconnect box checked off, Not sure why it wont automatically do it.
Im not sure If I should get a new router at home or a new wireless card or both?

edit; I have installed and reinstalled the wireless adapter drivers fr Toshiba site over and over w/ no change.

RELEVANCY SCORE 200
Preferred Solution: Wifi Card, Router, or Settings issue?

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Wifi Card, Router, or Settings issue?

kymira, Have you look at updating your wifi adapters driver? Is this a new laptop or did you install 7 on it? more info would help to resolve your problem. Good luck to you with this.
are you using this version # driver?
http://www.csd.toshiba.com/cgi-bin/t...ily=1073768663

Read other 4 answers
RELEVANCY SCORE 62.8

My HP ZBook does not connect to my D-Link  Model DSL-2750U rooter even though my phone and other laptops can connect to internet.

Read other answers
RELEVANCY SCORE 58

Hello, i have a very strange situation at the moment and I'm hoping someone can help.

I have a standard home wifi router from my isp downstairs (arris) and I use a Tp-link range extender/hot-spot upstairs, my laptop has started playing up and I can't figure out why.
When I connect my laptop (acer swift 1) to the tplink extender upstairs it works as it should, wifi is full signal and 50+ mbps. However when I connect it to the router downstairs, even if I am sat next to the router, the signal bar is full however speeds are 1-5mbps and drop to nothing every 30 seconds or so, Web pages won't load saying there is no connection.

I thought it may be the wifi card (Intel AC 7265), but I ruled it out as it works perfectly on the repeater and other people's routers.

I don't know if it's the main router either as all other devices (phones tablets etc.) work perfect with the downstairs router. It only happens with my laptop.

I have updated all drivers and done the usual rebooting of routers and laptop etc. And still no better.

Hope someone can help.
 

Read other answers
RELEVANCY SCORE 58

So I'm having some networking issues and I believe they are probably related.

(note: Win 8.1 Pro x64 - brand new format & fresh install from disc, system updates have run their course)

A Wifi printer (Canon MG7120)- even though I have definitely connected it through the on-screen display on the printer, is not found by a computer running the driver setup using the detect printer function (I have done this before just fine, note: different os install, different router).

Additionally - a wifi Camera (Motorola FOCUS66)even though connected to the router (Verizon Fios Quantum Gateway), and visible from remote connections, cannot be connected to locally.

It seems like these 2 problems probably stem from the same cause, probably either a firewall or router setting. I'm guessing router? Or else Windows Networking settings? Any ideas?

I have tried turning the firewall completely off and that does no good. Also, the computer is not directly involved in the Camera b/c I am accessing it from my ipad.

A:Router settings? Firewall issue?

bump..

Read other 1 answers
RELEVANCY SCORE 57.6

Hello,

I am an owner of the Lenovo y510p laptop. It is notorious for having a internet connectivity problems with its intel n 2230 wireless card. In my case the internet connection would drop every minute at its worst and every 6 hours at its best. I have looked for solutions to this issue and as possible result I am in the current predicament. Here are the most likely culprits:

1) I have installed Wireless_17.0.5_De164 from https://downloadcenter.intel.com/Det...?DwnldID=23994
2) I have uninstalled Intel Management Engine Interface from the Device Manager as suggested in this forum https://communities.intel.com/thread...t=225&tstart=0

At this point I have received BSOD, driver_corrupted_expool. I rebooted the computer and it was working fine and and then when I tried further changing options in my wifi card I would get BSOD, but then the system would not boot without getting BSOD. I panicked, and have re-installed windows while keeping all the files. Following the re-installation of windows the BSOD problem still occurs and is consistently occurring when I try changing Advanced settings of my wifi card from the Device Manager window. Furthermore, I have got BSOD on other occasions 1) Freshly after rebooting when I opened Firefox. 2) While making a call on skype. I have received several errors including bad_pool_header.

Hope that helps, I have attached my diagnostics.

Thanks so much in advance,
dobryjr

A:BSOD after changing settings in Wifi card

Hi Dobryjr & Welcome to the forums ^_^,

I have analyzed your dump files and below has been provided an analysis of that :-

Code:
**************************Tue Jul 29 10:03:21.614 2014 (UTC + 5:30)**************************
Probably caused by : nwifi.sys ( nwifi!ExtSTAShutdown+55 )

BugCheck 19, {21, fffffa800e042000, 1090, 119}
BugCheck Info: BAD_POOL_HEADER (19)

BUGCHECK_STR: 0x19_21

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x19_21_nwifi!ExtSTAShutdown

MaxSpeed: 2400

CurrentSpeed: 2394

BIOS Version 74CN44WW(V3.05)

BIOS Release Date 09/18/2013

Manufacturer LENOVO

Product Name 20217

??????????????????????????????????????????????????????????????????????????????????????``
**************************Tue Jul 29 10:01:17.986 2014 (UTC + 5:30)**************************
Probably caused by : nwifi.sys ( nwifi!ExtSTAShutdown+55 )

BugCheck 19, {21, fffffa800c896000, 1090, 16d5}
BugCheck Info: BAD_POOL_HEADER (19)

BUGCHECK_STR: 0x19_21

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x19_21_nwifi!ExtSTAShutdown

MaxSpeed: 2400

CurrentSpeed: 2394

BIOS Version 74CN44WW(V3.05)

BIOS Release Date 09/18/2013

Manufacturer LENOVO

Product Name 20217

??????????????????????????????????????????????????????????????????????????????????????``
**************************Tue Jul 29 09:28:29.662 2014 (UTC + 5:30... Read more

Read other 5 answers
RELEVANCY SCORE 57.6

Hi,
i just bought a new laptop lenovo z510 with windows 8, it has issues connecting with wifi. it gives the following error
"the settings saved on this computer do not match the requirements of the network".

i tried looking for it over the net still all the solutions are for windows 7 or vista, i go to control panel>network and Internet> network and sharing centre>

i am trying everything possible to sort out this issue, kindly help me in this, do consider it is windows 8 and it does not have manage wireless networks option.

when i switch off my wifi router for 10-15 sec and switch it on then for some time the net connects but after sometime same issue.

also i have tried forget the network and again select it still nothing works.

Kindly help, Thanks you.

A:Windows 8 Wifi connection issue : the settings saved on...

Originally Posted by k12


Hi,
i just bought a new laptop lenovo z510 with windows 8, it has issues connecting with wifi. it gives the following error
"the settings saved on this computer do not match the requirements of the network".

i tried looking for it over the net still all the solutions are for windows 7 or vista, i go to control panel>network and Internet> network and sharing centre>

i am trying everything possible to sort out this issue, kindly help me in this, do consider it is windows 8 and it does not have manage wireless networks option.

when i switch off my wifi router for 10-15 sec and switch it on then for some time the net connects but after sometime same issue.

also i have tried forget the network and again select it still nothing works.

Kindly help, Thanks you.



Have you tried to update "Windows Updates" this system using a wired connection?

Which make/model router are you using for this connection?

Read other 5 answers
RELEVANCY SCORE 57.2

I am using NetGear wifi rooter.Regularly my laptop is unable to detect my router even though router is brodcasting.At the same time my mobile is detecting same wifi router and I am able to use internet through router.One more thing is my laptop is detecting other wifi routers except my router when this issue happens.

Read other answers
RELEVANCY SCORE 57.2

I currently have two cables. One cable is a yellow ethernet cable that is plugged into my motorola cable modem in the Ethernet slot. The opposite end is plugged into the Slot 1 slot in my Linksys wireless router. My second cable is a grey ethernet cable. One end is plugged into the back of my computer and the opposite is plugged into Slot 2 slot in my Linksys wireless router. All of the lights are on both my modem and my router as if everything is working okay. The internet works as well.
However, when I try to access my Linksys wireless settings by typing in http://192.168.1.1/ in my address bar, it says the connection has timed out. It says this each time.
Now, when I move my yellow ethernet cable, that is plugged into Slot 1, into the Internet slot in my Linksys router, and I slide my grey ethernet cable to Slot one, I restart my router and I am now about to access http://192.168.1.1/. However, though I can access these settings, I cannot browse the internet. When I go to google or any other website, it says page cannot be displayed. Therefore, I cannot easily toggle between the Linksys settings and my internet, without moving around wires and restarting my router.
I'm doing this because I'm trying to configure my router with WiFi so I can use my Nintendo DS. Can anybody tell me why I'm having such difficulty with being able to view the Linksys settings and keep my internet connection at the same time? By the way, my Linksys Wireless Router is a WRT54G. My O... Read more

A:Router and Modem WiFi Issue

Well, the modem has to connect to the WAN/Internet connection or you won't have any success here. What's happening now is the computer is connecting directly to the modem and using the router as a simple switch.

Do NOT try to configure the router using the wireless connection! Connect it with a cable for configuration, then you can disconnect it once you get it all configured.
Reset the router to factory defaults by holding the reset button down for 15 seconds with power on.
Turn off everything, the modem, router, computer.
Connect the modem to the router's WAN/Internet port.
Connect the computer to one of the router's LAN/Network ports.
Turn on the modem, wait for a steady connect light.
Turn on the router, wait for two minutes.
Boot the computer.

When the computer is completely booted, let's see this.

Start, Run, CMD to open a command prompt:

Type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

Read other 3 answers
RELEVANCY SCORE 56.4

I have an old D-Link router (DI-624), can I use it as a wireless card? I am short on money and don't want to buy a PCI one.
I have Windows XP Pro SP2, and the CD that the router came with.

A:Can I Use My Old D-link Wireless Router As A Wifi Card?

Could you give some more information please? Do you have a NIC card in your computer? Or are you asking if you can use a router in place of a wireless adapter? Your computer must have a wireless adapter or a wired NIC card.

Read other 5 answers
RELEVANCY SCORE 55.6

Hello all
I just bought a leguang N-120 usb wifi wlan card out door antenna for my windows 7 dell laptop. It works great getting 4 bars from 2000 feet away.I need to know where I can find a wireless router for it so I can use it on other computers in house. I tried using mhotspot but cannot get it to work.

A:leguang n-120 wifi usb wlan card need wireless router

From website, it seems pretty straight forward to set up.

Maybe you need to disable the on-board wireless, in case you haven't done that yet.

Read other 2 answers
RELEVANCY SCORE 55.6

One of the laptops at work is having issues, and I think someone with monkey hands screwed something up. As "the computer guy", it's on me to get it fixed.

His Windows 7 computer will not connect to a wifi network. It can detect them (so I know the radio is on), but after half a beat, I get that "windows was unable to connect" message".

Thinking it was the internal card, I connected my external antenna, and got the same error. So I think I can rule out hardware. I tried using an identical laptop from work, and that one connected with no problem. So I think I can rule out any issues with my router.

I've updated all the possible drivers on the computer, Windows is up to date, and i've disabled IPV6.

Here's where it gets weird. He can get an intermittent connection when he uses his phone's hotspot.

A:Windows 7 wont connect to wifi (not a hardware / router issue)

can we see an ipconfig /all and an xirrus
also
What firewall / security suite or anti-virus do you currently have on the PC - or you have ever had on the PC in the past - any trial ware - like Norton, Mcafee , AVG etc

have you tried a restore to a working date ?

usually company PCs are configured in such a way - that we are unable to provide assistance - as we may suggest doing something which is outside the companies process/rules

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

We would like to see the results from an ipconfig /all - post back the results in a reply here.

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results into notepad and then automatically open the notepad and display on your screen.

No... Read more

Read other 19 answers
RELEVANCY SCORE 55.6

I used to have AT&T Uverse internet service. When using their service they gave me a D-Link DWA-140 range booster. I recently got a Nighthawk AC1900 smart wifi router model R7000 and now am using Charter internet. I have been using the D-Link range booster and was curious if it was compatible with my Nighthawk AC1900 router as far as capable speeds so I asked the question in a yahoo answers forum and I received the following response. "You CAN use the device BUT it is a Draft 802.11n Wireless USB Adapter thus it can not and will not deliver 802.11AC speeds that your AC1900 uses! The 1900 will simply revert to "N" speeds and those are much slower than 1900mbs!" If that is the case then obviously I don't want to use it if it will slow speeds down. When I unplug the D-Link range booster and restart my computer I can't locate any options for WiFi on my windows computer running windows 7 premium. Do I have to reset my Netgear Nighthawk router in order to see wifi options again? Thanks in advance for any assistance anybody can offer me.

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit
Processor: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2038 Mb
Graphics Card: Intel(R) 82945G Express Chipset Family, 256 Mb
Hard Drives: C: 289 GB (251 GB Free); D: 8 GB (1 GB Free);
Motherboard: ASUSTek Computer INC., Leonite2
Antivirus: ... Read more

Read other answers
RELEVANCY SCORE 54.8

Hey guys,

First post here so hello everyone.

I'm having a odd issue with my WiFi card, I'm not sure if it is driver related or hardware, I have a "Belkin F5D7001" there are no Vista 64bit drivers for it, but Windows auto finds drivers for it and it works, kinda. Windows sees it as a Broadcom 802.11g Network Adapter.

My problem is it only runs at 11Mbps - I can set it to 54Mbps but the results are below;

Download Speed: 663 kbps (82.9 KB/sec ) Upload Speed: 263 kbps (32.9 KB/sec ) 54 setting

Download Speed: 3769 kbps (471.1 KB/sec ) Upload Speed: 1115 kbps (139.4 KB/sec ) 11 setting

I have tried this at different times same result, I have the power settings to max but still no good. It use to work fine on my old Netgear but they don't support 64bit, I can't seem to find any 64bit drivers that work with this one apart from the Windows one.

My net can do at least 8000 kbps as I have tested it with a hardwired PC.

Anyone have any ideas? Thanks in advance.

A:Odd WiFi card issue

Its auto compensating for a weak wireless signal?

Read other 3 answers
RELEVANCY SCORE 54

I recently tryed installing a Pci Wireless Lan Card in my compaq desktop computer with windows xp and have too many issues lol i put the card in and the computer detected a new device, But but wont install it. i tryed to install using the software disk with the Card but that wont work aswell keeps telling me USB multi-connestion Audio device needed????? when i go to my network connections it shows the Lan Card but says "Network Cable Unplugged" im trying to use WIFI confused
any help would be appreciated........
Thanks,Matt

btw its a
54M IEEE802.11 B/G
Wireless Lan Card
 

A:Wifi/Lan card install issue????

Read other 11 answers
RELEVANCY SCORE 52.8

Hi,

I recently bought dlink D2750U WIFI ADSL modem/router, for my ADSL internet connection.

But I have now changed my ISP, who provide internet via cable(not telephone line). The ISP guy provides a cable modem(old modem) along with it.

I have connected my PC this way:
Cable modem -> Router -> PC through RJ45. I am able to access internet from my PC, but I am not able to get wifi working on the router. And I am logging onto internet through a dial up connection.
Questions:
1) Please help in configuring the router to get wifi working.
2) Also, my default gateway seems to be either 0.0.0.0 or blank. So, I am not able to login to the modem unless I remove the modem connection. Please let me know if I am doing anything wrong here.

Here are a few more details:
Output of ipconfig: http://pastebin.com/Zr9Eb7L7
 

A:Using dlink D2750U Wifi Modem/Router As a Wifi Router

Hey Narain. The D-Link unit you have appears to be a combo unit (modem and wireless router) since it connects straight to the RJ-11 phone line. This unit won't work with an ISP that provides service by way of coax cable. The D-Link will work if you want to use DSL, but you need a cable service compatible modem or combo modem/router if you use cable service.

ftp://support.dlink.co.in/broadband/DSL-2750U/manual/DSL-2750U_C1_Manual_IN_1.00.pdf
 

Read other 6 answers
RELEVANCY SCORE 50

I have a laptop INSPIRON E1705 with a WLAN card (p/n DW 1390) installed. I would like to replace it with a WiFi/Bluetooth combo card so I can have Bluetooth capability. What is the recommended card to buy that is compatible with Windows 10? 

A:Replace WiFi PCIe card with WiFi/Bluetooth combo card.

Given that there will be no antenna inside the system for bluetooth, you're better off with one of these:
www.newegg.com/.../Product.aspx

Read other 1 answers
RELEVANCY SCORE 48

I have a desktop that is able to have wifi it's a adapter dell 1450 UBS Wireless 802.11a/b/g it works so does the router which is a Cisco Linsky E 1000 it shows um that it works I'm getting packet but I just can't seem to connect I don't understand it says that I am connected but I cannot get on the internet what am I doing wrong please help my desktop is compaq hp with wireless capability help!
 

Read other answers
RELEVANCY SCORE 48

I was attempting to port foreward for my PS3, but was having no luck. Long story short, I tried changing the router's IP to see if it would work. Here's where the problem began. I changed it from 192.168.2.1 to 192.168.1.1, which I believe may have made it conflict with my modem. Now I'm stuck not being able to access the internet through the router at all or access the router's configuration to change it back. When I try to access it, I just get a "Page not Found". The computer connected directly to the router is running Windows XP. The Router is a Linksys WRT54GS v. 4.

I've tried disconnecting the internet from the Router to see if it would stop the conflicting problem (if that is indeed the problem), but it didn't work. I've tried setting up many different static IP adresses for the computer connected to the router directly, but it didn't work. I've tried nearly everything, but I just can't get it working.

I'm posting this through a computer connected through a switch to my modem.

Thanks in advance.
 

A:Solved: Unable to access internet or router settings after changing router's IP.

Read other 8 answers
RELEVANCY SCORE 48

I am currently stationed in Germany, and live in a village that has horrible internet. I cannot stream netflix, hulu, and downloads take several hours.

Is there a way to combine the internet that my cell phone receives and the wifi router I have at home to increase speed?

I have the ability to create a wifi hotspot from my cell phone if this helps.

Just something I thought up in my head, and wanted to find out if it is possible. Thanks in advance.
 

A:Combining Wifi Hotspot and Router Wifi for faster internet

You can, try this http://www.octopusplus.com/download.jsp or http://www.connectify.me/
 

Read other 1 answers
RELEVANCY SCORE 48

I am looking to replace my tired Linksys WRT54G router that is about 10 years old. I love the router, and its even better with DD-WRT on it, but I'm starting to have troubles with the wifi dropping all the connects for a couple seconds when running all my wireless devices. I have 3 smart phones, 2 tablets, 1 Chromecast, a smart TV, and Roku + a laptop or 3 in my house right now, and it seems like its getting to be a bit much for it.
I have had to completely re-flash the firmware twice this year to get the wifi working again, so I'm thinking its time for replacement.
I have been thinking about just getting the new WRT54GL for $50, but I'm also thinking it might be a good idea to upgrade the wifi technology past wireless G .
I'm wondering if my Tablet (Nexu 9), and our smartphones (Razr HD Max) along with the Chromecast will take advantage of the new wireless standards and higher speeds or not? If they will can someone recomend a decent wireless router that takes DD-WRT nicely in the sub-$100 range? Thanks!
 

A:Looking for new Wifi Router - Will Tablet/Smartphone take advantage of new wifi Standards?

I been programming in Android/Linux since 2010 and there is code that supports VHT is Very High Throughput. Right now the standards are HT is High Throughput .

As for DD-WRT firmware is like your overclocking your router pushing it beyond the OEM limits. I use to use DD-WRT but had quit many years ago since the routers that used that firmware would fail too much.

So best to buy a better business type enterprise router wired then you can use WiFi router as AP or just get WiFi AP(access point). To me WiFi Router is also Wired Router, but to use just a wired router and use WiFi AP through a switch is better. If one or the other goes you can easy replace them. Where as if the WiFi Router fails you would need to replace it.

If you really want to use DD-WRT then Look at Buffalo WiFi Routers some come pre-installed with DD-WRT on them. Frankly you really don't need DD-WRT today because newer routers or WiFi routers are much better built and offer much more power NPU = network processor units and 128, 256, 512, 1GB of RAM some have Dual Cores.
 

Read other 9 answers
RELEVANCY SCORE 47.6

I have been trying for some time to accomplish the title result. I'm not techie enough to do it.

What I want is to be able to use a Tablet to read in the rear of my home (which is out of range for incoming wifi signal.)

If I can set up the computer to do this, I will cable connect to a router in that area.
I have two computers and could use either.

1.a PC running XP (should update to windows 8.1, but have never bothered to do that, since XP works just fine. (I had this computer sharing to the router, when I had DSL internet connection, using Windows wizard to set it up) Couldn't get it to work when I switched to WIFI internet access) I could switch to win 7 or 8.1 if that would help.

2. a Lap Top running WIN 8.1,

Any help is appreciated.

A:Internet access via WIFI and share WIFI via second router

Due to the age of XP this is not the best option for what you want to do

Either windows 7 or 8.1 have access to Internet connection sharing (ICS) built in

To use ICS you need at least two connections to the local LAN, these can be any mix of wifi or Ethernet.

As you have a laptop you likely already have a system to use for this

There is a tutorial explaining the basics ... and more on this site

Check it out and post back if you have any issues

Internet Connection Sharing - Create WiFi HotSpot

Read other 2 answers
RELEVANCY SCORE 47.6

Wifi doesn't connect when i move away from wifi router. I have a wifi router installed in my drawing room where i get good browsing speed on phones and laptops. But the problem starts when i take my laptop from drawing room to my bedroom which is not more than 5 mtrs from router. Wifi signal drops to zero on laptop whereas it remains decent on phones. Earlier my laptop used to connect in bedroom as well..This is happening lately. Is there any solution?

Read other answers
RELEVANCY SCORE 47.6

my HP 15 116 laptop wifi cannot connect to wifi router modem AND it keeep on saying "cant connect to this network" whereas it  can work perfectly fine on smartphone wifi hotspot . please fix it ......... DONT MAKE ME REGRET ON BUYING HP LAPTOP ....

Read other answers
RELEVANCY SCORE 47.6

So I got a new router yesterday to replace the old one, and I've been working on it for a long time. But I can't seem to figure out why there isn't any internet connection. The new WiFi Router (D-Link DR-842) Shows it is connected to the internet (green light) but in the setup page, it says disconnected. Could the PPPoE details be causing this? As far as I know everything is correctly set up except for the internet part.
 

Read other answers
RELEVANCY SCORE 47.6

Hi Could you please tell me if this is possible:
My computer is connected to a wireless network. Can I hook up my D-link (DIR-412) to my computer and use the internet from the computer to output another wireless area?

Thanks sounds complicated.
 

A:Connected to WIFI and want to extend wifi with another wireless router

Where you live is your setup like this?

#1
Internet
Modem
WiFi Router

or

#2
Internet
Modem with built-in WiFi Router

If you want extend the WiFi you would get WiFi Access Point. Or you can take a WiFi Router and disable NAT, SPI, DCHP, then you create a static IP address. 192.168.x.50
 

Read other 2 answers
RELEVANCY SCORE 47.2

I want devices connected to the router to be able to connect to the modem.

My ISP modem says:
Local IP address 192.168.1.1
Subnet mask 255.255.255.0
DHCP Server: Enabled
Connection mode: DHCP
Starting IP address: 192.168.1.10
Ending IP address: 192.168.1.128
Connected devices: Eth-Switch LAN (2) 192.168.1.12 Netgear WNDR4000 Router

My Router says:
Router Information
IP address 10.0.0.1
DHCP: On

Internet Port
IP address: 192.168.1.12
connection DHCP
IP subnet mask: 255.255.255.0
Gateway IP address: 192.168.1.1
RIP Direction: Both
RIP Version: Diabled
Attached devices: 10.0.0.4 HP computer
Use Router as a DHCP Server:yes
Starting IP address: 10.0.0.2
Ending IP address: 10.0.0.254

So how would I modify the settings so the HP computer (10.0.0.4) could see the modem (192.168.1.1)?

Answer for dummies please!
 

A:What are the correct settings for a Router connected to an ISP Router/Modem box.

Let's be clear: you have

Code:

isp==modem at (192.168.1.1)
|
+--- (192.168.1.12) router (10.0.0.1) - - - hp pc (10.0.0.4)

what happens if the HP does ping 192.168.1.1 ?
 

Read other 1 answers
RELEVANCY SCORE 47.2

i have posted this but no one has even viewed it as the title wasn't very good.

Anyway, i have 2 wifi routers, one in the lounge that is on internet, one in my room that is not.

i want them both to be able to supply internet.

the one in my room will just be used to ethernet internet into my PS3.

alternative is that i use the wifi on my laptop then ethernet my laptop to PS3, is this possible?
 

A:Wifi router to wifi router? so i can use PS3 via ethernet

Read other 16 answers
RELEVANCY SCORE 46.8

Hello, I am a bit of a hard time with 2 routers on one network and unfortunately as things stand now they both have to be there. So I just got ADSL and the only modem option available to me was one with a 4-port wired router, I hooked that up into my existing network of about 9 computers (5 laptops and 4 desktops) which is connected by another 4-port WiFi router.

I started out with my only goal of hooking 3 of these computers to the internet after I got the DSL by some MAC filtering configured in the WiFi router. But, having the DSL modem/router has created another issue. I am using 2 separate IP gateways for both the routers which are in the same subset, I can connect to both of them from all my machines. The problem is I don't have any control over which computer connects to what router. I am trying to avoid setting each PC up with a static IP that needs internet access.

Here is my setup in more detail. My ADSL router is 192.168.1.254 and my WiFi router is 192.168.1.111 and both have the subnet 255.255.255.0. My ADSL connection has dynamic IP and the modem/router is connected into a LAN port on the WiFi router. I have tried disabling DHCP on the modem/router and changed my WiFi router IP to that of the modem (which was counter productive) to no avail. Someone mentioned MAC address cloning but I am not sure if it will work in this setup. Since I configured this I am seeing quite a few IP conflicts, which are probably my fault as I didn't check when I was setting... Read more

A:Wifi Router + ADSL Router = Issues with dynamic IP

Read other 6 answers
RELEVANCY SCORE 46.8

Hello guys, I'm new here, and I know that this sounds like a duplicate thread, but I couldn't find anything similar to this one.  I have said laptop with the Intel wireless card (7260) running Windows 10 and Ubuntu 16.04. I'm on the go quite often so I have connected to several wifi routers with no issues.  And there is my home. I am rarely here, but when I get here I can connect to my wifi router (2.4 GHz), but often experiencing unusually high pings (above 1000 ms). This happens on both OS-esI have the latest wireless driversIn Windows Device Manager I set everything I could to max the wifi performanceNo other device has this issue (two laptops, two smartphones, an USB wifi stick on my home network (not simultaneously of course))The environment should not be an issue. The router is 6-7 meters away, with two walls between the router and the laptop. I have an older Lenovo laptop next to this one (G580) and it has no issues at all. The laptop does not have this issue with other devicesThe issue is with the connection between the laptop and the router (I tried reaching the router's config site, same slowness)The network properties say that my connection link's speed is 27/27 MBPS, sometimes less, sometimes more, but I always have a strong signal There is only one other wifi router nearby and that's on a different channel.It is starting to get really annoying, so any help would be greatly appreciated.

Read other answers
RELEVANCY SCORE 46.8

I have a Netgear WGR614v9 router and was wondering if its possible to use this as a wireless adapter for my computer?? I think it might support the DDWRT open source firmware??? I am wanting to do this STRICTLY as a learning purpose.
 

A:Solved: use my wifi router as wifi adapteR??

Read other 8 answers
RELEVANCY SCORE 46.8

Actually my wifi adapter can catch all other wifi signal except my wifi router.

A:my notebook wifi adapter don't get my wifi router

There are several resons.1. The wifi signal might be too weak at the point where the computer is.2. Other device radiation/signals might be blocking it.3. Your router signal might be hodden (check EWS of router).4. Signal broadcasting might have been turned off on router. Since other signals are found on the computer, there shouldnt be a issue with your couputer.

Read other 1 answers
RELEVANCY SCORE 46.8

I just want to know if its possible to connect your wifi broadband to wifi router? and if it is, How?
 

A:HOw to Connect wifi broadband to Wifi Router

I may be misunderstanding you but if you're getting WiFi out of your broadband appliance already, you don't need a router. If you do want to use a WiFi router, you're not going to be using the WiFi signal from the broadband appliance.
Sent from my iPhone using Tapatalk
 

Read other 2 answers
RELEVANCY SCORE 46

Hello one and all,
I am sincerely hoping someone can assist with my little networking problem as i'm tearing my hair out now..

Here at work we have a Vigor Modem/Router hosting our connection to the world. It was originally on DHCP & the 4 computers & 2 printers found their own IP addresses without problem.

We added a Linksys router via ethernet (to a lan port not the wan) in another area of the yard. This was fine also on DHCP and connecting wirelessly from a laptop or mobile phone was a doddle.

Then our oh so wonderful IT geek decided to put the Vigor on a Static IP along with all the computers connected to it. This has some how cut off the wifi capability of the Linksys router now.

It is basically acting as a hub for two laptops and nothing else.

In simplistic terms with some detail what settings need changing on the Linksys if any?

The Vigors internal IP is 192.168.1.1
Linksys is 192.168.1.4
both on subnet 255.255.255.0

I have been advised to set the Linksys to a static IP on the Internet Connection option but what set of figures do i need for that??

Fingers crossed...

Stonkin
 

A:Adding a wifi router to router on static IP

Read other 9 answers
RELEVANCY SCORE 45.6

When i was using windows 8 the wifi was good and would never get disrupted.But i updated to windows 8.1 and now when am downloading something the wifi gets disconnected and wont show the network even if the router is on and my phone is still connected to it.I have to toggle the wifi on and off for some 6-7 times and then toggle airplane mode on and off for 3-4 times to get it to discover the network.Is this because of the adapter or driver and my laptop has a ralink wifi adapter.What should i do?Thanks

A:Windows 8.1 wifi issue ralink wifi adapter and envy 15t j001...

Goutham, Welcome to the HP Forum. You might try the following Ralink driver for Windows 8.1 :sp63945 Mediatek - alink 802.11 WiFi Adapter V5.0.34.0 - Win 8.1 [Devices] (Hardware Ids)PCI\VEN_1814&DEV_5390="Ralink RT5390 802.11b/g/n WiFi Adapter"PCI\VEN_1814&DEV_539F="Ralink RT5390 802.11b/g/n WiFi Adapter"PCI\VEN_1814&DEV_3592="Ralink RT3592 802.11a/b/g/n WiFi Adapter"PCI\VEN_1814&DEV_3090="Ralink RT3090 802.11b/g/n WiFi Adapter"PCI\VEN_1814&DEV_539A="Ralink RT5390R 802.11b/g/n WiFi Adapter"PCI\VEN_1814&DEV_539B="Ralink RT5390R 802.11b/g/n WiFi Adapter"PCI\VEN_1814&DEV_3290="Ralink RT3290 802.11b/g/n Wi-Fi Adapter"PCI\VEN_14C3&DEV_7630="Mediatek MT7630E 802.11bgn Wi-Fi Adapter "Your computer's webpage does show a few drivers for Windows 8.1:HP ENVY TouchSmart 15-j001tx Notebook PC Drivers  Hope this helps. Click the Kudos Star!It is a great ?Thank You? to the HP Experts who are here to help!

Read other 9 answers
RELEVANCY SCORE 45.6

I upgraded my friends HP laptop to Windows 10. The issue now is I can't enable Wifi. The card is recognized correctly in Device manager and no issues is found with it. It looks like it is fine. However in the Network Settings WLAN is set to "Off" and when I try to turn it on it always jumps right back to off. eg. I can't enable it.

HP is now help as they clearly state any laptop bought prior to specific date in 2013 will not get any driver updates from their side for windows 10. (Guys, never buy HP again please...). And updating through device manager only tells me it's the newest driver available.

The Wifi card i Broadcom 4313GN card. I searched for win 10 drivers but did not find anything.They only offer linux drivers on their homepage...

So can anyone either provide a solution to the issue or link to a win 1' driver for this wifi card?

A:Dreaded Win10 WiFi Issue: Can't enable WiFi after Upgrade

I had a similar issue were I was stuck in Aeroplane mode on a cleanly installed W10. Turned out I had to uninstall it from the HID's in Device manager. It's worth checking that he's not stuck in it too. Search for drivers in Windows 7, from the HP website and you'll most likely resolve the issue.

Read other 0 answers
RELEVANCY SCORE 45.2

Hello,

I have recently bought a new pci wifi lan card (Ralink rt61 turbo) and have plugged in and installed drivers. Initially the drivers the company I bought it from told me to install didn't work, but after some googling found the correct drivers and downloaded from Ralinks website. However these didn't work either.

When using the Ralink wireless utility it says that the card is disconnected, however in device manage it is both connect and the correct drivers installed and everything is perfectly fine.

I ignored the wireless utility and hoped that windows 7 would still be able to use the wireless card as past experiences have shown to be true. This case however I get nothing. Windows 7 says that the wireless card is experiencing problems, it doesn't show any of the routers that should be shown.

I have been looking around a lot and there have been several drivers that should have worked and they haven't.

I would have thought that the antenna is broken or the card doesn't work however when I use it with ubuntu instead of windows 7 it works perfectly fine without any hassle, so the card is definitely working.

Any advice that anyone can give on how to resolve this would be very welcome.

Thanks

Aieden

A:Ralink RT61 WiFi Lan card, windows 7 not receiving any wifi signals

Have a look at this thread.

Ralink RT61 Turbo Wireless Driver

Read other 3 answers
RELEVANCY SCORE 45.2

HI, I am having G400s Touch laptop which is out of warranty. It has Qualcomm Atheros AR9485WB Wireless Netowork Adapter (Wifi Card) installed but now a days I am getting problem in connecting to Wifi. Router doesnt has any issue as mobile and other laptop is able to connect to same wifi without any issue.   Sometime G400s Touch laptop connects to wifi and then dropped and then didnt connect again for hours. So I decided to change the Network Adapter I want to change to new Wifi card which is Dual Band. Please let me know which all Dual Band Wifi Cards / Network Adapter supported by G400s Touch. Is there any link on web where i can see the compatibility. I dont want to end up in the situation where I will buy dual band netowrk adapter but then it wont support my laptop. Please help!!! Thanks...

Read other answers
RELEVANCY SCORE 45.2

Hey guys,

So, what i'm trying to do is create a wifi hotspot using my computer. In other words, turning my computer into a router. I'm wanting to do this so i can use my ipod at home instead of only when i'm around other wifi hotspots.

My computer is running off of a wired router, so that i can play online on my PS3 as well. I was told wifi doesn't work well with Ps3's normally so i just bought a wired router. So, the mainline internet cord is plugged into a wired router and then another line runs into my computer.

For some reason, after i make an adhoc connection, the computer is not sending the required information to the iPod so that it connects to the internet.

I've tried entering in the information into the Static tab in my ipod as well, and still only get Local Connection instead of Local and Internet.

This is what my connection looks like through the router using ipconfig /all:


Code:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\Kyle>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Crommy
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : twinvalley.net

Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
... Read more

A:Creating Wifi hotspot with built-in computer wifi card.

Hi Cromsy,

Welcome to Vista Forums!

Unfortunately, it isn't as simple as that. You are connected to the router fine with your computer, but that tells us nothing about the ipod because wireless is off (but that's not the whole story either - you need something extra to do what you want). The following article should tell you what you need and how to do it: How to Connect iPod Touch to Windows 7 Ad-hoc Wireless Network. Although it says Windows 7, there are procedures for Vista as well (and the software will work with Vista).

I hope this helps.

Good luck!

Read other 3 answers
RELEVANCY SCORE 45.2

B570 Laptop (Lenovo)Serial Number: WB03xxxxxxxMachine Type Model: 1068AGUWindows 7 Home Premium 64-bitAtheros ar9285 AR5B95 (replacement from third party, sold as new)Physical wifi switch is "on".Adaptor is correctly identified in Device Manager and driver loads okay. Driver shows best driver when update attempted.Adapter appears in Network Connections, but shows the big red X and "Not connected".Wifi network icon appears on system notification area, again with a big red X.Attempted to connect shows "No connections are available" and there is no list of available SSID's. I am sitting less than 6 feet from my Buffalo Air Station and there are multiple devices connected to the wifi on that router.  I have restarted the router and checked configuration to make sure it's not totally locked down.Fn-F5 appears to do nothing. Power Management is installed and configured.The wifi light (lower left corner of the case, light farthest to the right) lights briefly during startup (POST?) then never lights up again.I installed this card myself and have checked the hardware multiple times. Wires are connected, card is fully seated in socket.Checked the knowledge base and found this:   https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Z470-cannot-connect-to-WiFi/ta-p/681711  Did not help. Does anybody have any ideas about this? Any help appreciated. Mark

A:B570 - no wifi connections available on replacement AR9285 wifi card

Failed to mention: The driver is updated automatically. I also tried rolling it back to version 8.0.0.238 (10/5/2009). Did not resolve. Currently on driver version 9.2.0.115 (11/24/2010).

Read other 1 answers
RELEVANCY SCORE 45.2

I'm having a problem that's been on and off with my.wifi for a while. I have a Yoga 2 Pro and the WiFi card seems to disappear completely and I can't get it back without removing all the batteries and leaving it a while. It's not like it needs a driver update, it totally disappears as if it's not even installed and won't show up in any OS or even under the "rfkill list command". It appears to be completely failing. Thing is I've swapped it out and it seems to be some part of the operation that mounts it that isn't working. I notice that it installs into the power board and not the motherboard. Would swapping this fix it? Does anyone have any ideas?

Read other answers
RELEVANCY SCORE 45.2

I have issues connecting my Laptop to the Wifi router in my house, however, there are no issues connecting to other routers? You would therefore assume that the issue lies with the router at my house. However, every other device and laptop connects to the router at my house with no issues at all. So it seems to be specific to the combination of my laptop and the router at my house. I have been having these issues ever since I downloaded Windows 10. I fixed it initially by downloading an old driver for the Wifi on my laptop. This fix lasted for about 3 months but since the latest windows update, the issue has come back. The issue is intermittent wifi where it shows I am connected to the Wifi but then the internet doesn't work. It says "DNS probe cannot be found" when running troubleshooter and then it resets the wifi on my laptop. This can temporalily fix it, sometimes for 2 seconds. Sometimes for 2 hours. But then the issue comes back. Does anyone have any clue what the issue might be or how I might fix it? Sometimes, when I run the troubleshooter, it says that I have missing protocols. But then this doesn't happen every time. I have tried a variety of fixes that I have read up on in forums but none seem to work permantly. One thing I haven't tried is a clean install of windows 10 which is something I am very reluctant to do and also, have my doubts as to whether it would actually resolve the issue.
Many thanks,
Joe

A:Wifi issue specific to my laptop and home wifi

It all depends on location, location, location. Some Gateways are just garbage. If you are not getting a strong enough signal, get an Access Point. Also you need to make sure that you are not on a congested channel, which is usually Channels 6 & 11 for 2.4 Ghz units.

Read other 0 answers
RELEVANCY SCORE 44.8

Hello,

I have a wireless adsl router in preparation for broadband arriving in our area soon (long story), and have some questions:

I have a laptop with wifi card and want to setup a home network with this, and my PC (plugged-in via LAN cable to the router).. laptop is XP, PC is Win2K
I can't seem to get this to work. one minute the PC can 'see' the laptop (in network neighbourhood) and then the other way round, but I can never access shared directories on either... is there a good guide somewhere to set this up?

Also, shouldn't I be able to use the router from the PC as if it were a wifi card?
i.e. on the laptop, once the wifi card is plugged in, it displays all wifi networks in the area and their signal strength etc.... how can I do this using the router/PC??

With the laptop I can connect to our neighbours wifi router and use their bradband connection, but I want to do the same from the PC.. is that possible?

Thanks in advance all..

(P.S. router is a D-Link DSL-604+)
 

A:Wifi Router / Wifi Network help!?!?

Read other 11 answers
RELEVANCY SCORE 44.8

I have this Westell B90-327W 15-60 dsl modem/wireless router combo.

It works fine that's not the problem here\ I'm trying to get into the router settings so I can change some port forwarding settings.

The problem is I go to connect and it prompts for user name and password. Usually the default is leave username blank and 'admin' for password. Doesn't work though. I go to westell website and go to this model and it says that since its throug hverizon I have to contact them for support - but verizon website has no information on this model and is completely unhelpful.

I was wondering if anyone else has this model or has a westell modem and knows what the defulat username/password is.

thanks
 

A:westell dsl/router - how can i get to router settings?

Read other 6 answers
RELEVANCY SCORE 44.8

Ok here's my problem. I have a berklin wifi reciver on top of my house in a cantenna focusing at a satellite dish. It's pointed at my cousens house 3/4 th's a mile away. I have permission to use their internet and it's encrypted.
But since the wifi reciver card hooks up to my computer usb. what I want to know is. How can I hook up my netgear 54mbps router up to my computer so I can brodcast a wifi signal in my house.
The netgear router connects earthnet (dang spelling)
I have a earthnet card in the back of my pc should I plug it in there and will it brodcast into my router?
just wondering if this can be done. I am not relly experinced with networking.thx
I know thare's another post similer but is there any adapters or anything??
 

A:Netgear wifi networking useing another wifi card

Read other 12 answers
RELEVANCY SCORE 44.8

This is my first time posting so i hope its in the right place. Here it goes:

I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:

1. Made computer boot in safe mode with networking.

After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on. Any help is appreciated.

Hahaahahaha don't look at the other tab

A:WiFi not working after replacing WiFi card [BCM94352HMB]

Why are you booting into safe mode? I would connect a network cable to the wired network port, if possible for you. In regular windows, not safe mode, right click on the 802.11ac network controller and uninstall. Right click on the top device manager entry for the computer itself and select scan for new hardware.

Read other 12 answers