Over 1 million tech questions and answers.

Updating BIOS for Z50 gives a 0x45 error-code

Q: Updating BIOS for Z50 gives a 0x45 error-code

Hello Lenovo support, I just tried to update my BIOS on my Lenovo Z50, which has Windows 10. I chose the file this site said I just use, 9bcn91ww.exe, but when trying to install it I get the message:ErrorIHISI: Get support mode error in SMI!SMI Return Code: 0x45 Am I trying to install a wrong version or is it something else?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Updating BIOS for Z50 gives a 0x45 error-code

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 86.4

Trying to restore Emachine E28 laptop.
After last install disk runs I receive the following message:
Restore failed. Error code = 045 (WIM ApplyImage cannot apply image. the request could not be performed because of an I/O device error.)
Have tried almost everything I can think of but no results.
Would someone be able to help?

A:Restore failed Error code = 0x45

Please clarify what you mean by "restore", system restore? Repair? Restore to factory condition using the built in recovery console? Using restore disks? Did you create/purchase/download & burn the restore disc set?

What symptoms/behavior/ problems...etc led you attempting to restore? Any recent hardware/software/changes/problems that may or may not contribute to these problems? Potential helpers need more to go on.

Just my .02

Read other 5 answers
RELEVANCY SCORE 59.6

 Product Name: HP ENVY 15-j059nr Quad Edition Notebook PCOperating System: Microsoft Windows 10 (64-bit)Excused me!I have forgotten my ENVY 15's BIOS administrator password.This is the code it shows after 3 times of typing the wrong password:18874377 Could you give me the reset code for this, please?Thanks in advanced.

Read other answers
RELEVANCY SCORE 59.6

Hello.

First of i wanna tell you that this sistem isn't genuine, i had a serial, but a week or two ago it got blocked after two-three years of using it. o.O Second, I've got a new version of windows from one of this forum users and when i try inplace upgrade it said i have to update my version of windows to sp1. I went to Windows Update and started downloading it(that is the only update left, all others I've downloaded and installed before). I've successful downloaded(it was around 13MB) it and started installing it, but the install failed and show me that an error was found, the code of the error is 800736CC. I tryed downloading the whole sp1 pack from microsoft directly, but the install failed again. Can someone help?

A:Error while updating to SP1, code 800736CC

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

Read other 1 answers
RELEVANCY SCORE 59.6

Hi, the following update reports installation error:

kb2880987
error code 537
July 8, 2014 update for Office 2013 (KB2880987)

I tried downloading the file from the link above and no success, install reports error. I disabled firewall, antivirus and no luck, I also tried booting in safe mode, no luck either. Any hint? Thanks

A:Error Code 537 when updating Windows

This should be done through Windows Update

Read other 9 answers
RELEVANCY SCORE 59.6

Windows will not update this one item....

error found: code 80070643

I even went to windows and tried to update manually and it says some updates were not installed: update for windows (KB950125)

Is there a way I can get it to stop asking me to update this update? It is driving me crazy.
 

A:error code when updating windows

Yes if it is just that update you want to disregard - let it come down through Automatic Updates -- then right click on it and check the option to "Hide" the update.
 

Read other 1 answers
RELEVANCY SCORE 59.6

Hello, as I was trying to download the Sp1 update (kb976932) for my windows 7 professional I encountered an error.

I ran Windows update diagnostics but my download still stops at 29% and then gives the error.
I have Attached my cbs and my sfc detail file to my post.
I am currently downloading SURT, due to my internet it could take a few hours.
Any help is appreciated. thank you

A:Updating to Sp1 Error Code 0x80070002

Hello and welcome to the sevens forum.

Some times this error code means you have some sort of malware in your system.

First run a full scan using your security software and if you don't have malwarebytes on your computer please download the free version and run a full scan as well.

Malwarebytes Anti-Malware Free

Read other 3 answers
RELEVANCY SCORE 59.6

It's error code 8024801C. When I tried to update, that's what came up.

Can someone identify this code?

A:error code when updating windows

  
Quote: Originally Posted by skillboy


It's error code 8024801C. When I tried to update, that's what came up.

Can someone identify this code?


Seems like this is an old error code for a virus or malware. You should thoroughly scan your computer for such. Then run your updates.

Read other 6 answers
RELEVANCY SCORE 59.6

I get an error code upgrading to Windows 10...

Please help me with this error code: "WindowsUpdate_C1900101" "WindowsUpdate_dt000"
Thank you so much! Forum seems great :D

Read other answers
RELEVANCY SCORE 58.8

Hi all,

I want to update IE10 because i need it for Games for live,



I get that error when updating it and when I download it via IE10 website it gives me an error saying that it need to update via windows update.




Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-C7393-R6G2X-P8D42
Windows Product Key Hash: OOCxy3A6J6Co3DGNATk/g7Skszc=
Windows Product ID: 00371-OEM-9045055-26117
Windows Product ID Type: 3
Windows License Type: OEM System Builder
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {52DBF96C-B01E-45CA-8D99-6170DFF0603A}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130801-1533
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002 ... Read more

A:IE10 not updating error code: 9C57

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

Read other 1 answers
RELEVANCY SCORE 58.8

Hi,
I am and have had the problems with updating IE9 to IE10 and now IE9 to IE11.
Upon failure to upgrade I get the error code 9c59.
Any thoughts?

Thanks.
W7x64 sp1

A:Error code 9c59 when updating from IE9 to IE11

Kayoo mate osme system specs would be really helpful but take a look at this answer from bassfisher Can not update to Internet Explorer 10 and 11, Error Code 9C59 in Windows Update - Sysnative Forums

For system specs System Info - See Your System Specs - please

Read other 9 answers
RELEVANCY SCORE 58.8

There are 2 updates that fail, kb2943357 & kb2973112. Beside code 800B0100, I have also seen error code 80246007. I have run SFC, the dotnet fixit tool, & others; nothing has worked. SUR says it can't fix 800B0100 & a cryptographic error!? I tried placing some files in the \windows\checksur folder, but that didn't change anything. The log files are attached.

Thanks for your help.

A:error code 800B0100 when updating dot net kb2943357

CheckSUR shows the following problems...

Code:
Unavailable repair files:
winsxs\manifests\amd64_microsoft.transactions.bridge.dtc_b03f5f7f11d50a3a_6.1.7601.22733_none_65085bdd54b4a629.manifest
winsxs\manifests\amd64_wcf-m_sm_ins_rc_dll_31bf3856ad364e35_6.1.7601.22733_none_2795328d79930284.manifest
winsxs\manifests\amd64_wcf-system.runtime.serialization.ref_b03f5f7f11d50a3a_6.1.7601.22733_none_424d323c8e896dad.manifest
winsxs\manifests\amd64_wcf-icardres_dll_vista_31bf3856ad364e35_6.1.7601.18523_none_6f276a738180cba8.manifest
winsxs\manifests\amd64_wcf-system.servicemodel.ref_b03f5f7f11d50a3a_6.1.7601.22733_none_5ebf2b63339ef82d.manifest
winsxs\manifests\amd64_wcf-smdiagnostics_b03f5f7f11d50a3a_6.1.7601.18523_none_f5ee0756c06c09cd.manifest
winsxs\manifests\msil_system.runtime.serialization.resources_b77a5c561934e089_6.1.7601.22733_en-us_787b5545d9776103.manifest
winsxs\manifests\msil_smdiagnostics.resources_b77a5c561934e089_6.1.7601.18523_en-us_496526973f1e68f2.manifest
winsxs\manifests\amd64_wcf-m_sm_ins_rc_dll_31bf3856ad364e35_6.1.7601.18523_none_271663c8606d49a2.manifest
winsxs\manifests\amd64_microsoft-windows-wcfcorecomp.resources_31bf3856ad364e35_6.1.7601.22733_en-us_ff634b2369479517.manifest
winsxs\manifests\amd64_wcf-infocard_api_dll_31bf3856ad364e35_6.1.7601.18523_none_02011939c648dcfe.manifest
winsxs\manifests\amd64_wcf-system.servicemodel.washosting_b03f5f7f11d50a3a_6.1.7601.18523_none_0242455f46f9765d.manifest
winsxs\manifests\amd64_wcf-icardagt_e... Read more

Read other 9 answers
RELEVANCY SCORE 58.8

it showed up that error code, and this showed up in the setupper.log


Code:
2015-06-19 01:20:43, Error MOUPG SetupMgr: Error reading Store SQM registry data. Data = [StoreSetupDownloadCancel], HRESULT = [0x80070002]2015-06-19 01:20:43, Error MOUPG SetupMgr: Error reading Store SQM registry data. Data = [StoreSetupDownloadPause], HRESULT = [0x80070002]
2015-06-19 01:21:37, Error MOUPG CSetupManager::Execute(365): Result = 0x800705BB
2015-06-19 01:21:37, Error MOUPG CSetupHost::Execute(209): Result = 0x800705BB
2015-06-19 01:21:41, Error MOUPG SetupMgr: Error reading Store SQM registry data. Data = [StoreSetupDownloadCancel], HRESULT = [0x80070002]
2015-06-19 01:21:41, Error MOUPG SetupMgr: Error reading Store SQM registry data. Data = [StoreSetupDownloadPause], HRESULT = [0x80070002]
2015-06-19 01:22:30, Error CONX Failed to get image properties for \??\c:\program files (x86)\batterycare\winring0x64.sys: 0x80070003
2015-06-19 01:32:26, Error [0x08039d] MIG Cannot add mapping for user profile C:\Users\smsun_000. Error: 1009: Win32Exception: The configuration registry database is corrupt. [0x000003F1] __cdecl Mig::CIndirectKeyMapper::CIndirectKeyMapper(class UnBCL::String *,struct HKEY__ *,class UnBCL::String *,class UnBCL::String *,int,int,const Mig::HiveLoadRetryOptions *)[gle=0x000000cb]
2015-06-19 01:32:26, Error [0x080801] MIG User p... Read more

A:Trouble updating to 8.1 Error Code 0x80070004

bump

Read other 2 answers
RELEVANCY SCORE 58.8

Hi,

I have a problem with updating SP1 on Windows 7 computer.

I tried blow so far but no luck yet.

1. System Update Readiness tool runs to completion.
2. SFC scan did not detect any errors
3. The SP1 update (KB976932) has failed several times
4. Tried to install with offline version file downloaded from Microsoft but it failed too.

I attached screenshot of error code I am getting.
Thanks.

Read other answers
RELEVANCY SCORE 58.8
A:Error Code 9C59 when updating IE10

Your problem appears to be manifold...
Line 325485: 2013-11-09 11:26:56, Error CSI [email protected]/11/9:16:26:56.289 (F) d:\win7sp1_gdr\base\wcp\componentstore\csd_winners.cpp(1302): Error 80092004 [Warning,Facility=FACILITY_NTSSPI,Code=8196 (0x2004)] originated in function CCSDirectTransaction::AddImplicationsToCatalogsAndVerifyComponentHashes expression: (null)
Line 325487: 2013-11-09 11:26:56, Error CSI 00000289 (F) 80092004 [Warning,Facility=FACILITY_NTSSPI,Code=8196 (0x2004)] #1716892# from CCSDirectTransaction::PrepareForCommit(...)[gle=0x90092004]
Line 325488: 2013-11-09 11:26:56, Error CSI 0000028a (F) 80092004 [Warning,Facility=FACILITY_NTSSPI,Code=8196 (0x2004)] #1716891# from CCSDirectTransaction::ExamineTransaction(...)[gle=0x90092004]
Line 325489: 2013-11-09 11:26:56, Error CSI 0000028b (F) 80092004 [Warning,Facility=FACILITY_NTSSPI,Code=8196 (0x2004)] #1716890# from CCSDirectTransaction_IRtlTransaction::ExamineTransaction(...)[gle=0x90092004]
Line 325490: 2013-11-09 11:26:56, Error CSI 0000028c (F) CRYPT_E_NOT_FOUND #1716642# from Windows::COM::CPendingTransaction::IStorePendingTransaction_Analyze(...)[gle=0x80092004]
Line 325491: 2013-11-09 11:26:56, Error CSI 0000028d (F) CRYPT_E_NOT_FOUND #1716119# from Windows::ServicingAPI::CCSITransaction::ICSITransaction_Commit(Flags = 38 (0x00000026), pSink = NULL, disp = 0, coldpatching = FALSE)[gle=0x... Read more

Read other 9 answers
RELEVANCY SCORE 58.8

 How do I solve it ?   It is 0xc1900107.

Read other answers
RELEVANCY SCORE 58.8

Hello All,

I having an issue with updating my Window SP1 with IE11 and some other updates. I have tried all possible combinations mentioned on the forum threads, but with no success.

As requested,I have installed the SURT tool and the log files are attached for your reference.

Would appreciate any help in resolving this issue.

Thanks,

iglobal

A:Error code 9C57 when updating with IE11

Your CheckSUR persist log shows the following...





Quote:
Summary:
Seconds executed: 620
Found 18799 errors
Fixed 4 errors
CBS MUM Corrupt Total count: 4
Fixed: CBS MUM Corrupt. Total count: 4
CBS Watchlist Package Missing Total count: 14996
CBS Watchlist Component Missing Total count: 3799
Fixed: CBS Paired File. Total count: 4


I don't think there's any option here except a repair install - or a clean install if either you don't have the appropriate media, or the repair fails.

Read other 1 answers
RELEVANCY SCORE 58.8

Ok so I use to be able to download and install some updates, but few would actually install. But now Windows Update can't even search for updates to install. I have tried manual installations from the Windows update site and that doesn't work either.

This is very frustrating to me because I can never install important updates on this computer, even when I freshly reinstall Windows, and I have done so sevreal times.

A:Problem Updating Error Code 80073712

What MS say about this error:The "Windows Features" dialog box is empty in Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0x80073712"

Nothing to lose if also try this:The "Windows Features" dialog box is empty in Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0x80073712"
and this Fix for Vista SP1 install error 80073712 through windows update | Windows Reference

I found also sometimes help run checkdisk on startup -here you have tutorial how to do that Check Disk - chkdsk
You have to apply for all partitions
If nothing help and If you don't perform system restore try this:

Run cmd.exe with administrative previlliges and type

sfc /scannow

when it will done create report

Run cmd.exe with administrative previlliges and type

findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >%userprofile%\Desktop\sfcdetails.txt

on your desktop appear file sfcdetails.txt

next run CheckSur Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, for Windows Server 2008 R2 Release Candidate, and for Windows 7 Release Candidate
even if this tool won't resolve problem automatically it create logs:

C:\Windows\Logs\CBS\CheckSUR.log

System also create logs -there is log C:\Windows\WindowsUpdate.log but this log is most... Read more

Read other 1 answers
RELEVANCY SCORE 58.8

Hello! 

I keep getting error code 0x80070714 while updating Windows 10. I am running Windows 10 Pro version 1511 (64 bit)

 What does this error mean and how do I resolve it?

Please help if you know.

Thank you

Read other answers
RELEVANCY SCORE 58.8

I am getting constant messages to upgrade from my Windows8 to 8.1.  Yet whenever I do this I get the error code Ox80070005. I have tried the fix recommended but still unable to upgrade. I notice that many others have had the same problem. Why do Windows
ask us to upgrade and then make it impossible to do so?!!
thanks for any advice

Read other answers
RELEVANCY SCORE 58.8

recently I have been unable to install vista updates and have consistently received the error code 800700C1 over several attempts

I read through this thread http://www.techsupportforum.com/f217...p1-251666.html and have run teh sfc/scannow to find that there are some damaged files.

I have an installation disk but did not see the option to repair files before it would install all of vista so I was afraid to go any further.

I've attached the CBS.log which appears to be longer than what I've done as the dates from when i scanned are 11/1/2009 at the bottom and the date starts a week ago. If anyone could guide me what to do from here it would be much appreciated.

-Ryno

A:error code 800700C1 when updating vista

Some suggestions at my blog: http://usasma.vox.com/library/post/w...d-26feb09.html

I'd suggest first:
- go to Start and type in "cmd.exe" (without the quotes)
- then, at the top of the search box - right click on cmd.exe and select "Run as administrator"
- then, go back to Start and type in "windows explorer" (without the quotes)
- then, at the top of the search box - right click on Windows Explorer and select "Run as administrator"

Then, go to the black Cmd.exe window and type:

net stop wuauserv

And press Enter
(you should get a message that the service has successfully stopped)

Then, go to the Windows Explorer window
and navigate to C:\Windows\SoftwareDistribution
And delete the contents of the folder.

Then, go back to the black cmd.exe window and type

net start wuauserv

And press Enter
(you should get a message that the service has successfully started)

Then try to update again (make sure all Windows Update stuff is closed before re-opening it.

Read other 4 answers
RELEVANCY SCORE 58.8

I cannot update Windows at all and it keeps coming up with this error "code 80072EFD".  I have tried all the solutions that I have found on Microsoft and on other support sites (checking that the update sites are allowed, stopping my antivirus and trying to update, stopping my firewall and trying etc etc) and nothing is working.  Any help with this will be much appreciated. Thanks PS - I am on an Acer Aspire notebook with Windows Vista Home Premium.

Read other answers
RELEVANCY SCORE 58

I have Windows 8.0 and I keep getting this message while trying to update the video app from the Windows Store.
Is there any way to solve this problem and download the update to this app?...or
Is there another app I can use to replace the video app?

A:Error Code 0x80070005 Updating App From Windows Store?

Error code 0x80070005 is also known as "ACCESS DENIED".

View this site for possible fix:

Error 0x80070005 While Updating Windows Store Apps

Read other 1 answers
RELEVANCY SCORE 58

Hi, I have been trying to update my Windows OS for a few days now via the control panel and keep getting this same error and not exactly sure what it or how to resolve this. If any of you could help I'd be very grateful.
 
Thanks.

A:Problem Updating Windows - Error Code 80072EE2

This may work if updating is the only issue,if not youl need to troubleshoot further.
 
http://www.thewindowsclub.com/windows-updates-fail-to-install
 
Scrole down to item 6 and run the Fixwu tool.
 
Also have a look at
 
http://windows.microsoft.com/en-gb/windows/windows-update-error-80072ee2#1TC=windows-7
 
http://social.technet.microsoft.com/Forums/windows/en-US/11f7f7e5-a826-4e94-af6a-8f5db3206d22/windows-update-error-code-80072ee2?forum=w7itprosecurity

Read other 26 answers
RELEVANCY SCORE 57.6

see the title, what can i do to fix it?

A:Error code 57E when updating microsoft office 2007-pack 3 (sp3)

bump

Read other 3 answers
RELEVANCY SCORE 57.6

Hello, I was referred here from another forum topic.... Please follow this thread to review all my posthttp://www.bleepingcomputer.com/forums/t/257239/possible-memory-modules-infected/I can't get Windows to updating.... Error Code 80070490 with 11 failed updatesThank you for everyones help

Read other answers
RELEVANCY SCORE 57.6

Dim SQL As String, pdb As Object, EmailAddress As String, Flname As String, Subject As String, Body As String, tels As Integer
Dim e1 As Integer, agecr As Integer, totcr As Integer

'loads of if buts an elses (have taken out; so as not to BORE you
'AT end
pdb.Edit
pdb!QLead = totcr
pdb.Update
pdb.MoveNext 'Get the next record from the SQL
Loop
pdb.Close

End Sub

What I would like to know is HOW and what code do I use to error check that the pdb.Update has been successful?
 

A:Error or return code coding in VB after updating a Access Database

Read other 6 answers
RELEVANCY SCORE 57.2

Hi All,
I downloaded the latest BIOS update driver from dell.com for my old Inspiron 5100 laptop. My laptop has A 06 version and the newest version is A 32. When I try to run it I get the message NOTICE-"Running on a unsupported system".
I have both XP home edition (which was the original OS when I bought the laptop )and XP professional. XP home doesnt allow me to boot my computer now.SO I run it on XP professional only.
I am doing this to reformat my computer with an external CD drive connected via the USB. My BIOS log doesnt recognize the USB connection.
Please help....
Thanks in advance
 

A:updating BIOS error please help

Running on an unsupported system.
 

Read other 3 answers
RELEVANCY SCORE 57.2

I'm trying to update my computer to Windows 7, but was told that my version of BIOS is incompatible. I went to the Dell website to try to download the newer version, but it keeps downloading the Dell Driver Download Manager instead of the actual file that I need to download... Anybody know how I could update this WITHOUT running into this problem? It's becoming seriously annoying...

A:Error updating BIOS

Hi and welcome to TSF what is the model of the computer,did you enter your serial to find the correct page,the simplest way is just to find the model from the select model option in the centre http://support.dell.com/support/downloads/

Read other 1 answers
RELEVANCY SCORE 56.8

So this all first started happening a few months ago when I was updating my audio drivers. The update was doing its thing then it crashed for some reason, and I haven't been able to update it at all since then. Oddly enough though, my audio has always worked fine. That is until today, for no reason that I can see, my audio has stopped working all of a sudden. But even though I can't hear anything either through my headphones or monitor speakers, I can see the little audio fader thing moving when I have some audio playing.

What can I do to try and fix this problem? Oh, and I should also note, the image that I posted, I get that pop-up everytime I start my computer. And the following is what it shows when you click the Details button.


HTML Code:
Error Code: -5006 : 0x8000ffff
Error Information:
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\ObjectHolder.cpp (442)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)... Read more

A:Error Code: -5006 : 0x8000ffff when installing/updating audio driver.

Hi HS5964,

If the 'Audio' has been working fine lately, you may try performing a 'System Restore' to roll back 'corrupt software changes': System Restore
Note: Please create a 'Restore Point' before attempting the 'Restore': System Restore Point - Create

If the issue persists, you may remove 'Audio drivers' from 'Device Manager' and try installing fresh set of drivers.
- Click 'Start' > Type 'devmgmt.msc' (without quotations) in 'Search box > Tap 'Enter' > Locate and Expand 'Sound, Video & Game Controllers' category > Right click and uninstall the 'Realtek related' driver > Follow through with the uninstall > Allow 'Windows' to restart > 'Windows' will install updates for the 'Realtek Audio' (You may also install drivers from the manufacturer website: Realtek) > Recheck the results.

Hope this helps. Do reply with the findings.

Read other 2 answers
RELEVANCY SCORE 56.8

I have tried for many months to fix this issue of installing SP1 for Windows 7 64 Bit version and I have continued to have issues. I found this forum and I need help on fixing it.

I get this error:
Window Update failing error code 800736B3

Attaching documents.

Thank you for any help you can provide
Greg

A:Windows 7 not updating to SP1 Window Update failing error code 800736B

Hello and welcome Greg now I am assuming you have 7 onboard and have been using it - or is it a new install and you are trying to get SP1 installed?.

If it is the latter then it is easily fixed using this tutorial
Clean Reinstall - Factory OEM Windows 7
If you have data on the install then if it isn't too much just back it up and do the tutorial.

Just one thing make sure you only pick the version you have an activation code for as trying to get a higher version installed will end in grief.

Read other 6 answers
RELEVANCY SCORE 56.8

Hello!I am trying to update BIOS on my laptop T460p and am getting an error.Here is a part of Winuptp file: [2016/7/1 19:38:47] version 29.03OS = Windows 10 64bitDriver Loading....DoneSystem BIOS Version -> R07ET20WApplying BIOS Version -> R07ET67WSystem EC Version -> R07HT08WApplying EC Version -> R07HT14WAC adapter/Battery check....OK.BIOS Flashing....The number of retries of BIOS update = 1The number of retries of BIOS update = 2The number of retries of BIOS update = 3Failed.Error : Failed to verify Secure Flash image.Error code = 234 Thank You in advance!

Read other answers
RELEVANCY SCORE 56.8

I just downloaded sp59218, a BIOS update  and the update failed.  The error I get is:The system BIOS update file (C:User\(name)\Download\ROM.CAB) is missing or corrupt.  The system BIOS will not be updated. Anyone else had this issue?  Anyone here from HP with recommendations or how to fix this problem and proceed the BIOS update? NOTE: I'm not familiar with F10 way update....i prefer from Windows directly.Thank you in advance for help!

Read other answers
RELEVANCY SCORE 56.4

Hi there,
I have recently purchased the HP Asus EEbook X205 which has windows 10.
When I log in to my Hotmail account, the emails in the inbox are more than a month old.  When I click on "fix this" an error code comes up:  0x80070426.  I have checked the email server settings and tried changing them but it makes
no difference.  I have also checked the Sign-in Assistant in the Local Service settings.
This is becoming very frustrating.  Please can you help?
Kind Regards, Lee

Read other answers
RELEVANCY SCORE 56

I'm attempting to update my bios while troubleshooting a 'plugged in, not charging' condition.  I went through the support pages, entered the service tag, and it recognized the computer as an Inspiron 3558. 
It listed one bios driver, which I downloaded, but when I run the exe it gives me this message:
Cannot update a Inspiron 5559 with a BIOS for Latitude E6530
Confusing.  Anyone have ideas?
Thanks

A:Error updating bios on Inspiron 15 3558

Check your system setup page (F2 at powerup).  If you have a 5559, the BIOS file is here:
www.dell.com/.../drivers

Read other 1 answers
RELEVANCY SCORE 55.2

It keeps failing every time it updates and I have no clue why!! Please help me solve this problem.


**Here are the details of the update**
Update for Windows 7 for x64-based Systems (KB2952664)

Installation date: ?8/?21/?2015 1:09 AM

Installation status: Failed

Error details: Code 8004402F

Update type: Recommended

Read other answers
RELEVANCY SCORE 53.6

My P1 has been running nearly flawlessly so of course when BIOS 1.18 came out with no possible value to me whatsoever, I decided to update. Process took MUCH LONGER than ever before (I've maybe updated the BIOS 3-4 other times) but it completed eventually, the system restarted, and then I saw the dreaded message: Configuration changed - restart the system I literally said "oh s---" out loud, watched it restart itself and cycle through the process three times, then the system started normally. Running W10, have never made any changes to the BIOS whatsoever. FWIW. I love my P1, it's the best & fastest laptop I've ever owned, but, c'mon Lenovo - get this BIOS crap sorted, willya? Geez... -kj-





P1: 8850H, FHD, 16gb, 512gb, P2000, IR Camera, Windows 10 ProT450s & X201t & M93p, too

Read other answers
RELEVANCY SCORE 53.6

As the title says. 3 year old laptop that otherwise is still great, now useless due to Lenovo not updating the bios and preventing me from updating windows which made adobe illustrator and photoshop stop working, can't download codecs, etc. Windows support said until lenovo updates the bios I'm out of luck and have a useless machine. I can browse the internet and use apps that haven't tried to update... Lenovo was a great machine. I was a big fan. Due to lack of support for older machines and this ridiculous issue I would never recommend any business professional like me to purchase one. To have it literally just stop working one day due to lack of software upkeep on lenovo is just silly. Is this how you make people buy new computers? It worked, except I'm going to go to best buy and ask them to sell me a machine that won't stop suddenly due to the manufacturer not keeping it up to date. For the record this is the second time this has happened and lenovo updated a few weeks later. I use this for work and can not deal with my apps not working for weeks while I wait for lenovo to roll out updates... SO, dear Lenovo, update the bios of the y50-70, serial: CB36361936

A:My y50-70 is now useless due to lenovo not updating bios preventing me from updating windows.

What version of Windows are you running right now, what version are you trying to update to, and what error are you getting? Per Lenovo (see link below), that model is compatible with Windows 10 1809, but has not yet been certified for Microsoft's just released May 1903 update. Lenovo devices tested for Windows 10 version 1809https://support.lenovo.com/us/en/solutions/ht507291 When Microsoft makes major OS updates, the manufactures of hardware devices in your system such as like Intel, Synaptics and Realteck etc. may need to provide updated drivers to computer manufacturers such as Lenovo etc. so their hardware will work properly.  Windows 10 version 1903 is just now rolling out, so I cannot believe that Adobe is requiring version 1903 for codec updates etc.    I also find it hard to believe that it is a BIOS issue, and would guess that most likely Microsoft is blowing you off with that excuse, because there are many Y50-70 systems running Windows 10 already using the old BIOS. Windows 10 Drivers page for Lenovo Y50-70https://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-y-series-laptops/y50-70-note...    Cheers,

Read other 2 answers
RELEVANCY SCORE 53.2

Alright. I have been building a new PC after a recent lightning strike burned the other one. This is the 5th PC I've built and have never had any problems.

When starting the PC it goes through the motions and recognizes the boot disks; however, shortly after a blank screen come up with the POST error code "EB_". According to Intel this is a "Initialize PCI and DMA" error. What is that? And how can it be fixed?

Any help is greatly appreciated.
 

A:BIOS Error Code

I'm not all that experienced in this kind of stuff, but you could try flashing your BIOS to the newest version and making everything is plugged in properly and tight.
 

Read other 1 answers
RELEVANCY SCORE 53.2

I have downloaded the bois from the lenovo official site. But when I am updating its show the error message not for this notebook . I have lenovo g500s laptop .other people also facing same issue for the same laptop .please help ...Thanks in advance...











Solved!
Go to Solution.

A:Lenovo g500s bios updating problem. While updating...

Pan761,
 
The correct version of BIOS update has been just released - BIOS Update for Windows 8.1 (32-bit, 64-bit)
 
Now there should be no problems with it's  installation.
 
Regards,

Read other 1 answers
RELEVANCY SCORE 52.8

New X250 notebook shipped with BIOS version 1.13, and I'd like to update it to 1.17, becouse it has Windows 10 support, and I'm having power management issues with that OS. (cannot wake up from sleep, system freeze when closing lid, even with sleep turned off in that case.) I can successfully downgrade my BIOS to 1.12, 1.11, but I cannot upgrade it to 1.16 or 1.17 (cannot download 1.13, it's revoked). The update starts in Windows, restarts, but then an error message stops the update: Finished PUP flashing, Error Code: Unknown error code (0xC),ADDITIONAL_DATA:0x7Error reported from PFAT: Unknown ErrorStatus of TdkBiosRomWrite: 1ERROR 102 : Failed to perform flash After rebooting, I can comfirm that the update failed. It's strange, as I mentioned, 1.12, 1.11 can be flashed without problems.BIOS rollback protection is off, secure boot is off, BIOS user flash is enabled.I've run out of options, any advice?

A:BIOS cannot update, ERROR CODE 102

Good day and welcome to the community.
 
Sorry you're having difficulty.
If you have access to a USB CD/DVD drive, you could try using the bootable disk method:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x25...
but you might want to speak with Support (info below) about this first. A failed BIOS upgrade can be very difficult to recover from.
 
Regards.
 
 
Hungary


THINK-branded products
English, Hungarian +36-13-825-716
9:00 - 18:00 Monday - Friday

Read other 5 answers
RELEVANCY SCORE 52.8

Item A) Upgraded BIOS to 1.19 & error code '10' showing in Device Manager. Upgraded to 1.21 & same thing happens again. All tests show normal results on hardware. Tried removal & roll-back on the drivers, re-installed them, yet same error code. Machine runs perfectly. Just this one little glitch problem. Anyone know what to do? Would be grateful for any suggestions! Item B) Link for download yields 'The document you have requested is not available. You may have entered an incorrect URL or login with authorized credentials (for Lenovo Field Servicers and/or Call Center Agents only) to view the page' ; regarding ME hardware:https://pcsupport.lenovo.com/ddownloads/DS506357Not 100% certain that this issue is resolved; anyone know what happened? 

Read other answers
RELEVANCY SCORE 52.8

Please help me on how to fix my bios error code 81FB, i cannot log-in to windows xp

A:How To Fix Bios Error Code =81fb

frozenfire03,

Need more info. Is this error code appearing when you turn on your PC or when you're trying to install Windows. BIOS error code indicates a problem with the PC's CMOS BIOS, not with Windows. Please reply with the make/model of your PC and/or Motherboard and exactly when you're seeing this error.

- John

Read other 1 answers
RELEVANCY SCORE 52.8

Hello,please could you give me advice - I made a BIOS update (Version: 01.42Ap1). This update was strongly recommended in program HP support assistant. Immediately after update the error 601 occurred (for the first time...). The notebook was bought in 6-2015 and it is used only occasionally. The Battery Test in HP Support Assistant shows 0%. The program BatteryInfoView (BIV) shows Battery Level Wear 100% (which means that the battery is 100% ok). On my old (working) notebook EliteBook 8540p the BIV shows 35% level. I think that the battery is ok but something in BIOS is incorrect.Thank you for your advice.Tomas BIV - http://www.nirsoft.net/utils/battery_information_view.html

A:Error code 601 after BIOS update

Hi,  Please try updating the BIOS from HP Software Driver Download Page instead of HPSA.  You can visit the link below to update the BIOS, by entering your product details http://support.hp.com/in-en/drivers  Hope this helps ***If my post helped, click the White thumbs-up symbol to say thanks******Please mark Accept As Solution if my post solved your problem******Although I am an HP Employee, I am speaking for myself and not for HP***





I work for HP

Read other 1 answers
RELEVANCY SCORE 52

Motherboard:
PCCHIPS Model M810DLU (ver 5.2a)
BIOS:
AMI 62-1111-001131-00101111-040201-SiS740- M810D

I pulled this MB off my shelf of "projects". When I tried to make this work in the past, it always failed to boot. However, I discovered yesterday that 2 of my 3 Socket 462 "project" CPUs didn't work at all. #3 project chip - Athlon 2100+ does work.

So I put that project MB and project chip together, and the combo worked. I was able to boot from a live linux CD and from a Bart PE CD. That's the good news.

The bad news is that this combo - loaded with memory, video, drives, and any of 3 brand new 450W power supplies - occasionally fails to boot.
When it dies,

it's on one of the first 10 instructions
fails on POST Code 'dF'
resets the DRAM and CPU rates from 133 to 100 - changing my CPU from a 2100+ to a 1500+ -- PS: I know that an Athlon XP 2100+ actually operates at 1733Mhz

The Power Supply stays on and other MB accessories (CPU fan, drives as examples) continue to function. The video does not light up because it's too soon in the POST to display.

Normally that would be no big deal: look up the POST code and see where it failed. The problem is that I can't find any reference to a code 'dF' in any AMI or Award documentation or in the documentation available from PCCHIPS.

I've Googled terms like
+ pcchips + motherboard + m810d + "boot" + df
I've always gotten lots of hits, but nothi... Read more

A:Solved: Odd BIOS (POST) Error Code

Good Evening snorkytheweasel, I was just reading your post and the M810 looked familiar, quite coincidentally I have one in front of me right now. It is a M810LM slightly different but close.

It doesn't even post!

It did have an odd fail problem before it died. It originally had an Athlon in it.

I tried a Duron 1900 in it and it failed to work also.

I don't think this board is worth playing with further.

That hanging boot symptom is typical of a low 5 volt rail from the PSU.
One last effort may be tried by using a digital meter set to read a DC voltage higher than 10 volts and measuring one of the PSU drive power plugs between the red and black wires in a powered mode. That 5v is critical.

I have no idea what a df code is.

qldit.
 

Read other 3 answers
RELEVANCY SCORE 52

bios pasword error code CNU9333301V please....Spoiler (Highlight to read)  













Solved!

View Solution.

A:bios pasword error code CNU9333301V ,please

Hi, Enter  e9lofff136    ( 3rd character is a lower case L ) Regards, DP-K

Read other 4 answers