Over 1 million tech questions and answers.

Lenovo Y50 - 70 Not booting up

Q: Lenovo Y50 - 70 Not booting up

Hello, my Lenovo Y50 - 70 is not booting up easily, i have to try several times to finally boot up, when i press the power button, the screen doesnt turn on, the leds just blink like in the following video: https://goo.gl/photos/1ZYvgxZAhsKSBttN8 and the HDD led blinks at the same as the sound that can be hear from the 20 second of the video (It sounds harder on the left speaker), any idea of what could it be? when i suspend the laptop it wakes up fine, the problem is just when i restart o shut down the computer.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Lenovo Y50 - 70 Not booting up

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 48.4

My Y50-70 Touch has been sitting in my drawer for over a month now since i only use it for school. I start school tomorrow so i decided to start it up and charge it but it gets stuck on the loading screen with the spinning circle after the lenovo logo pops up. Its been on the booting screen for over 3 hours and wont turn on. Help please!

A:Lenovo Y50-70 Touch stuck on lenovo booting screen

Ive tried resetting the pc, start up repair, system restore and none of them are working. i get errors

Read other 1 answers
RELEVANCY SCORE 43.2

Hi there'This is the first time this has ever happened since owning my laptop.i have pressed the novo button on the side'it then brings up the NOVO BUTTON MENU ( with options )Normal StartupBIOS SetupBoot MenuSystem Recovery Please help' which one do I choose and what do I do once I select that option!Thanks!  

A:Lenovo g50 not booting

I have since tried system recovery and it came back with a msg that system recovery failed.

Read other 2 answers
RELEVANCY SCORE 43.2

My Lenovo Laptop recently has stopped working.It turns on and everything, it just cannot boot up.The loading screen pops up and everything, but it won't go to the login screen.When I power the laptop on, it goes on the loading screen, and stays like that for a good 5-8 minutes, then gets an error message that says"Process1_Initialization_Failed"Then it tries to go into System Recovery, but after "Loading Files" it goes into the loading screen, then transitions into a black screen. There are no options, just a black screen.I wait for an hour, and absolutely nothing happens.I made sure nothing else is plugged in except for the Charger.The laptop is a Lenovo Y51.If you need anymore information, please ask. I really need this fixed soon.

Read other answers
RELEVANCY SCORE 43.2

My dad purched me a Lenovo G50 for my graduation gift. Im pretty sure my warenty has expired and i need help.  So i was on today for a few hours, i shut it down like i normally would with the shut down button. I try to get back on a few hours later to try and check my emails. It dosnt work and cant start up my Windows 10. Now ive tried doing start up settings restart to get it to do save mode. It dosnt let me it juat goes back into "automatic repair" i dont know what else to do and wanting to throw it out. I need serious help. Like soon

Read other answers
RELEVANCY SCORE 43.2

 I used the system yesterday and I shut it down only to switch it on this morning and discover that its getting stuck at lenovo logo.

A:My Lenovo G40 not booting to OS

[Moderator Note:  Moved to G series section.  AG]

Read other 1 answers
RELEVANCY SCORE 42.4

My Computer data:Lenovo G50- 45Win 8 already being installedMy problem:Hey dudes,I wanted to start my PC as always but instead of starting my GUI, windows just showed me the message that "Automatically reperation is being prepared". I used to wait but after hours the computer stayed the same. I decided to use the "onekey recovery" but instead of recovering, the computer just showed me the lenovo sign and used to load. The same procedure, I used to wait hours, but nothing changed. After that I prepared an USB device and set win 10 (64) on it and wanted to let him boot from my device. After having a lot of problems, I found a page on the internet telling me to change to "legacy" mode and to disable secure boot. Well, done that and enter with "Fn and F12" the boot menu. Selected my USB device and he is really showing me a Win 10 logo. But, and thats my problem he isnt doing anything else. He is just showing me a loading circle with a big blue Win 10 logo. I dont know what I should do next. Any Ideas around here? I've heard that a Hardware issue could be possible, isn't it? While booting, I pushed different Keys and heard one single, loud Beeping. Any ideas what I could do guys?Would be really glad to hear from you  - Greetings

Read other answers
RELEVANCY SCORE 42.4

Hello,I recently bought (used) a Lenovo H520 that will not boot. When I press the power button, the fans spin up and the power button stays solid on. The disk read/write light quickly flashes about every three seconds. Absolutely nothing happens on screen so I cannot access the BIOS. I got it cheap due to a bad hard drive and used an old Windows 7 drive instead. I upgraded it to Windows 10 (x64, wiping the 32-bit 7) and it worked fine. I do not know what changed between then and now but now it will not boot. I have already attempted booting without the hard drive to the same effect.Thank you.

Read other answers
RELEVANCY SCORE 42.4

So, I have a Lenovo Thinkpad Z61T 9660CTO which I bought in 2007. It has served me well. Yesterday, it was working perfectly, albeit with some exxtra high heating at the bottom, close to 60-70 degrees Celcius. Then , I wanted to put in a new SSD into it. So, I took out the old HDD and then connected it, and the other SSD via USB casing to another computer running a disk cloning software. Tried it did not work. Now, I put back the old HDD into the Thinkpad, it does not start up again at all. Even the first screen which says "Thinkpad" press Blue button for recovery" does not come up now. Hard drive is not it, since the screen does not switch on at ALL. If it was HDD failure, it would say something like HDD not detected. But in this case, it does not even show the initial Thinkpad screen. So, this may be a loose connection somewhere (even though I did not remove the casing at all while removing the HDD) Both times, I removed and reattached the HDD, with the power cable removed from the Thinkpad, but, the battery was still inside the chassis. Short circuit? Bad! Someone help.

A:Lenovo Z61T not booting

In case its not clear, when I press the power button, I do not arrive at the press Del to enter BIOS screen at all. No THINKPAD screen. Just black screen and no HDD activity

Read other 3 answers
RELEVANCY SCORE 42.4

 I bought this system just 3 days ago though not brand new but it was working very perfectly,   the system is running windows 8 pro n, I connected the system to the Internet and I was asked to update windows which I accepted and after the update,  (some failed while some were successful)  the system began misbehaving,  the screen goes black while the system is on,  I had to switch off the system and power it on again,  the screen comes up but after some time goes black again,  I tried some tricks I read online which seemed to work but later, the problem continued and the tricks stopped working, somehow,  I managed to get the system running normally again n I thought maybe the failed updates is the problem,  I selected the windows updates that failed n try to update again,  the screen went black again,   I turned the system off and tried to turn it on again but this time, it refuse to power on,  when I hit the power on button,  the power on light comes up and the fan tries to run and goes silent,  the power on light goes off immediately,  tried n tried n the same thing keep happening,  hitting the power on button, the power on light comes up and after some seconds,  goes off again,  I took the system to an engineer, he said the system has board problem,  I don't know how true is this Cus the system was running very  well,  all this problems started right after the wind... Read more

Read other answers
RELEVANCY SCORE 42.4

I had G580 with Win10 updated from Win8. After disk replace to Samsung EVO 850 computer do not boot. Only LCD was turn on and it has silver color (background light only). When I put on it stock disk everythink run ok, but I can not access bios. Then I was remove BIOS battery to check if it will possible to access BIOS. From that moment is G580 black-screen, does not boot with stock HDD, do not install WIN10 from recovery DVD, restore button does not work, battery remove and turning on for resset does not working.. Nothig. Laptop turn ON but screen is black. Never happend this before with any laptop. I google and try almost every hint.

Read other answers
RELEVANCY SCORE 42.4

My Lenovo B590 was working fine yesterday, today suddenly I can't make it boot up. I have recorded a video that demonstrates the behaviour of the Laptop on Power On:https://youtu.be/T9IcxsIgRcE It remains in an endless loop of powering up for a sec, making some click-sound and turning off immediately. Longpress power button ends the loop. AC cable is connected, battery is inserted. Things I tried that didn't solve the issue:Power On only with AC cable (normally and with 20 sec long Power press)Power On only with battery (normally and with 20 sec long Power press)Removing both RAM and trying it with one each in each of both RAM slotsProbably an issue with the motherboard? Anything else I could try?

A:Lenovo B590 not Booting at all

Welcome to the Lenovo Community !
 
Sorry to hear of the problem you are experiencing.  I would try removing the optical drive and then try powering the laptop up.  If that doesn't work then remove the hard drive and power up.  Since the click sounds mechanical in nature, that would lead me to suspect either one of those devices.  If the laptop powers up with a drive removed then suspect that drive as being faulty.
 
Your model's User Guide will explain how to remove those drives.  Here is a link to that manual for your reference.....
 
https://download.lenovo.com/pccbbs/mobiles_pdf/b490_b590_ug_en.pdf

Read other 1 answers
RELEVANCY SCORE 42.4

My Computer data:Lenovo G50- 45Win 8 already being installedMy problem:Hey dudes,I wanted to start my PC as always but instead of starting my GUI, windows just showed me the message that "Automatically reperation is being prepared". I used to wait but after hours the computer stayed the same. I decided to use the "onekey recovery" but instead of recovering, the computer just showed me the lenovo sign and used to load. The same procedure, I used to wait hours, but nothing changed. After that I prepared an USB device and set win 10 (64) on it and wanted to let him boot from my device. After having a lot of problems, I found a page on the internet telling me to change to "legacy" mode and to disable secure boot. Well, done that and enter with "Fn and F12" the boot menu. Selected my USB device and he is really showing me a Win 10 logo. But, and thats my problem he isnt doing anything else. He is just showing me a loading circle with a big blue Win 10 logo. I dont know what I should do next. Any Ideas around here? I've heard that a Hardware issue could be possible, isn't it? While booting, I pushed different Keys and heard one single, loud Beeping. Any ideas what I could do guys?Would be really glad to hear from you  - Greetings

Read other answers
RELEVANCY SCORE 42.4

Hi guys,I fresh reinstalled windows yesterday and allowed it to collect updates overnight, including drivers.This morning I wake up and powering on the machine, I am greeted with a recovery screen. Selecting exit and continue brings me back to the recovery screen.I tried refreshing it from that screen, though it asks for recovery media, of which there appears to be none, even when I have a properly configured and bootable recovery media USB key inserted.As a recovery bootable device I use a lexar 8 gb USB drive. The machine has no optical drive.The only thing I can gather is that USB and or legacy boot mode are not enabeled.As I am totally blind, I have very little knowledge of the bios of this particular device, and any decent explanations are scarce.I know how to get to them (press f2 for bios and f12 for boot menu I believe) though anything else is beyond me.Could somebody tell me what to press at the keyboard to enable USB mode, and or legacy mode, if that particular option is needed?And by the way, for those curious about how I gathered information about the recovery screens, I use an app called seeing AI, which takes screenshots of anything you tell it to, and tries to tel you what it sees.Even with good lighting, the seeing AI app isn't of much use to help navigating the bios menu. Most problematic, I can't tell exactly what order the app sees the options, as compared to what order they are actually in.I would be most greatful if anyone could help, as this is the only ... Read more

Read other answers
RELEVANCY SCORE 42.4

Hidy ho all,

I have a Lenovo G505s I bought in august. Up to this point, its been a great machine. This morning (11/20/2014) I installed some updates from windows update. around 4:30 PM today, I rebooted the machine, because I had an hour break in between classes. During that reboot it tried to install those updates, and it said it failed. After the failure it said it was reverting back to the prior state before the updates were installed.

It then rebooted again. It got to the Lenovo splash screen, and some little white text on the bottom of the screen has said for the past half hour "Updating your system (5%)" with the windows 8 little circle thing spinning around just above it.

I did try restarting it by holding down the power button, but it came right back to this screen.

Google has turned up nothing yet. Has anyone else had this issue? If so, have they (you) been able to fix it?
 

A:Lenovo G505s not booting

I think the quickest way around this issue is to let the OS try to install the updates it might take a while to do so(which is a pain) but I would wait because you don't want to mess up your system you might loose more than the time you will wait
 

Read other 3 answers
RELEVANCY SCORE 42.4

I am having issues with booting my laptop. The other day I tried turned on my laptop and it came up with a message which disappeared before I could check what it said. It then put me in a loop with restarting my laptop with options and now it isn't booting at all. Each time I try and power on the machine the screen goes black and the lights on the front to show power and charge light up. Then after about 20 or so seconds, it shuts down. I also tried pressing the OneKey Recovery button on the left side of the device however this did the same as the power button. I stripped down the laptop to check the CMOS battery to see if that was the issue but the battery was healthy and showing 3.19 volts. What else could this issue be?  Thanks, James W.

Read other answers
RELEVANCY SCORE 42.4

Every time I try to turn on my lenovo n22 windows notebook, the 'Lenovo' boot screens appears, sits for a moment, goes black, then comes on again. This has been happening on loop for hours. I have tried rebooting it, to no avail. Any thoughts?

Read other answers
RELEVANCY SCORE 42

I turned my Lenovo laptop on Friday to see the usual splash Lenovo on start up and then nothing else happened it kept continually doing that and going no further. Just so you know my laptop has no warranty left as I got it last Christmas second hand. I have been looking at demonstration videos on you tube and what I have tried so far is. I plugged in an external usb keyboard and got into bios and checked it was detecting my hard drive and it was. The next step I did was disconnect internal power/ battery and did the hold of the power button for 30 seconds to 1 minute  with the power cord connected only. And it was still doing the same. I then got advised to remove the cmos battery turn on laptop and then back off and put the battery back in. This has also failed to work so now I am looking for help here as I don't know what to do next and am hoping someone here has a different suggestion for me to try and hopefully get my laptop back up and running. Thank you in advance for any help given.

Read other answers
RELEVANCY SCORE 42

I cleaned the keyboard and packed the laptop, since then it's not booting. What are the possible reasons
 

A:Lenovo G450 laptop not booting

You need to give us a lot more details. What did you clean it with, when how.

and what do you mean "Packed up" the laptop.
 

Read other 1 answers
RELEVANCY SCORE 42

Good day everyone.I encountered a problem with my laptop yesterday. When I restarted my laptop, it showed me this:   Running startup repair always says "Startup Repair couldn't repair your PC". I have no idea what to do with this. My important files are in here, so it would be great if anyone could help me. 

Read other answers
RELEVANCY SCORE 42

when i turn on the system it wont load,it just stays on 'lenovo screen' and it will start loadingwhen alt+ctrl+del is pressed then only it will boot 1. Scan for virus, etc.-------No virus found2. Run in command prompt with admin rights "sfc scannow". Do not include the quotation mark.----windows resource protection did not find any integrity violations.  

Read other answers
RELEVANCY SCORE 42

Typing this on mobile device so have to be succinct.  Upon pressing power button: No backlight on monitor appears (monitor remains black) Fan remains running at normal speed Little lights indicating battery/power status of unit work normally removing/alternating ram has no effect on occasion when the laptop works, the slightest nudge will crash/power off system i know it sounds bad (motherboard damage maybe?) but any thoughts would be appreciated

A:Lenovo G500 fan running, no booting

The nudge & crash symptom is concerning.       Did the laptop get dropped or have anything happen to it that might lead you to believe the motherboard would be damaged, or result i the screen failing?     Do you have the ability to try connecting and external monitor to see if the system is actually booting?Does the position of the screen have any effect?    (I ask because there is a cable between the screen and base that can become damaged overtime, and perhaps could be shorting. Best of luck, Lenovo G400/G500/G405/ G505/G410/G510 Hardware Maintenance Manualhttps://download.lenovo.com/consumer/mobiles_pub/lenovo_g400g500g405g505g410g510_hmm.pdf  

Read other 1 answers
RELEVANCY SCORE 42

My Lenovo v570 just started to shut down while in use and now during the later stages of reboot.   It is a pc about 5 yrs old  I have removed battery and reinstalled with no changet in results  Any ideas  

A:Lenovo v570 shuts down while booting

Well since the hard drive is the only real wear item, that would surely be suspect.    Does the hard drive make any strange sounds?    If you can get into Window and open a command prompt, you can check the S.M.A.R.T. status of the hard drive by typing the command below and pressing enter.     You can also run that command from Safe Mode (command prompt)   wmic diskdrive get status It will return a status of each drive of OK, Bad, Caution or Unknown.    If is returns anything other than OK, then your drive may be bad. You might also try removing and re-seating the RAM modules by following the steps outlined on page 45 of the user manual linked below. Lenovo V470/V570/ B470/B570/B570e User Guide V2.0https://download.lenovo.com/UserFiles/UserGuide/en/User's%20guides%20and%20manuals/B570e/Lenovo%20V4... Note:   If you cannot get Windows to boot at all, and you have not backed up your data, you may want to have it looked at by a computer shop right away, because they can remove the drive, attempt to backup your data, and replace the hard drive if needed.   If the drive is failing, the more you use (or try to repair the system) the greater the chance the drive will fail completely. Best of luck,

Read other 1 answers
RELEVANCY SCORE 42

Hey I have recently gotten my sisters computer which has a broken screen. I have been having having WiFi connectivity issues so I went to the Lenovo page to check for updates on my drivers. Turns out there were quite a few updates including a bios one. So I clicked em all and began updating. Then I had to restart my pc so I clicked restart and update. Ever since the restart the PC will not boot anymore. Since the screen is broken (I've been using HDMI and a tv) I can't see what's going on either. I have tried running it without the battery but that doesn't change anything. Here is a video of the booting https://youtu.be/SCtI0HZXRcsThanks for your help 

Read other answers
RELEVANCY SCORE 42

I did do an update from the lenovo update Tool.  Since that it doesn't boot anymore.  It is stopping in some BIOS window showing the ssd but Nothing else. How can I recover again? Thanks jimbeam

Read other answers
RELEVANCY SCORE 42

hi my name is.recently i buy lenovo laptop.. after few month of use.. i am facing a issue regarding booting. the laptop is slow at startup. also my laptop is heating up continuously... i searched for lenovo support in the net but i cant find the proper solution what is the process to contact lenovo helpline number.
 

Read other answers
RELEVANCY SCORE 42

I have a new laptop T60 from Lenovo.. When I boot the XP CD it blooads fine.. When I choose etither Repair or Install the OS, I got a message that there is no disks found in the computer...

I have being used fine and I am just trying to install a new XP in a new Primary partition cretaed with PQ/MAGIC..

Any suggestion? any changes on the BIOS?

Reginaldo
 

A:Booting the CD... Do not recognize Lenovo T60 HD drive?

rbarosa said:

I have a new laptop T60 from Lenovo.. When I boot the XP CD it blooads fine.. When I choose etither Repair or Install the OS, I got a message that there is no disks found in the computer...

I have being used fine and I am just trying to install a new XP in a new Primary partition cretaed with PQ/MAGIC..

Any suggestion? any changes on the BIOS?

Reginaldo Click to expand...

I solved the issue....
The S-ATA hard disk must be placed in “compatibility mode” using a BIOS function before
SuSE can be installed or used.

Otherwise the XP disk boor does not recognize the HD..
Reginaldo
 

Read other 1 answers
RELEVANCY SCORE 42

Hi i have a Lenovo g50 that I purchased last year. It was working perfectly fine until today. As always, I turned on my laptop and waited for it to load. I went to get something and when I came back, it was still on the booting screen and the loading circle thing was still turning. I have Windows 10 running on this laptop. I restarted my laptop and the booting  screen came up again but it said Preparing Automatic Repair. I even tried to fix my bios thing as well but it didn't help. PLEASE HELP 

Read other answers
RELEVANCY SCORE 42

I adjusted the partitions of my lenovo g480 and accidentally deleted the hidden partitions. I restarted and the laptop just boots up with a blank screen. I tried pressing the novo button and the selection menu shows up. Whatever I select on the popup (normal startup, bios setup, boot menu, system recovery), nothing happens; and all I'm left is a blank screen. I tried connecting the laptop into an external display and still nothing shows up in the external display. I tried removing the battery and the 30s power button pressing, and it didn't work. Need this laptop for work. Hard disk when used in another computer the files are still there.

A:Lenovo laptop not booting up (G480)

hi RZPogi,
 
After removing the AC adapter, battery, and HDD, can you try to hold the power button for 20secs to remove residual power again on the machine. When finished, plug the AC adapter only then power up the machine and try accessing the BIOS via the F2 key or Novo button..
 
If successful, hit F9 to load defaults and hit F10 to save and exit. On another machine, connect the HDD and  backup your files then format it. When finished, put back the HDD on the G480 and boot from a Win7 installer via the F12 key to reinstall Windows 7.
 
Guide:
How to Create a Bootable Windows 7 Installation USB Flash Drive
How to Create a Windows 7 Universal Installation Disc
 
Note:
if the G480 came preloaded with Win7 Home Premium 64bit, reinstalling this same OS will automatically find the product key that's embedded in the motherboard and will activate your copy of Windows.
 
If the above steps doesn't help then there's likely a problem with the BIOS and needs to be reflashed. I would recommend you check these authorized service centers and report the issue:
 
Service Provider List (Philippines)
 
edit:
added links
 
 
Regards

Read other 3 answers
RELEVANCY SCORE 42

Hi everyone!I'm trying to boot for the first time in my Lenovo G500. It starts with the logo of lenovo and then it goes to a black screen and it is saying that is loading FreeDOS and is asking to enter a new date, new time and then it says C:/> and nothing happens. I put in the cd with Windows 8 drivers but i can't make it boot from the cd/dvd. Anyone can help?Thanks!

A:Booting for the first time in my Lenovo G500

Hi Stathesp,
 
Welcome to Lenovo Community Forums!
 
I?m sorry to hear that your G500 Laptop is booting to Black screen, I suggest you to change the Boot priority of CD/DVD drive 1st and HDD (Hard Disc Drive) to 2nd, below are the steps to access BIOS:
 

Turn OFF the computer and then click on NOVO button which is located at the left side of the computer.
Then under Boot tab change the CD/DVD as 1st boot and HDD to 2nd device.
Now press ?F10? Key to save the changes, the computer will automatically restart.
Then check inserting the Disc and check the issue.

Do post us back if the issue still persists.
 
Best Regards

Shiva Kumar






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 7 answers
RELEVANCY SCORE 42

Hello, I am running windows 8 on a lenovo yoga 2 pro, and suddenly, it won't boot. The power light will turn on, and the capslock and backlight work, but the screen doesn't work. It doesn't even show the Lenovo boot screen
 

A:Lenovo yoga 2 pro windows 8 not booting

Try and boot with charger plugged in. If this works try installing the latest updates you may have restart and install more than once so be patient. If this doesn't work check with your device maker.
 

Read other 1 answers
RELEVANCY SCORE 42

I have searched all forums including this one and have been unable to find a resolution to my issue.I have had my laptop (Thinkpad T460s) for just over a year now and use it for work daily. I was using it with no issue at lunch, but when I opened the lid around 3 hours later - the screen was black and the laptop seemed to be stuck in sleep mode. I tried a hard reset and now I can not even get the Lenovo post menu to show.If I press the power button, the keyboard momentarily turns on the backlighting and the power button stays illuminated, after about a minute the power button turns off. This entire time the laptop screen is completely black, I don't see the Lenovo post menu and therefore have no acces to the BIOS or OS.I have tried using the hardware reset button on the bottom of the laptop, removing the 2 discreet batteries, removing the CMOS battery, removing all batteries and resetting the RAM. None of this has gotten me any headway on resolving this issue. I am going to try contacting technical support but am hoping someone may help me find a quick and simple resolution to this issue. 

Read other answers
RELEVANCY SCORE 42

We use a variety of model of laptop and workstation and build them using Microsoft ConfigMgr (SCCM), using PXE boot to get into Windows PE, where SCCM then applies the image and software.We are finding the Lenovo units take a long time (between 7 and 15 minutes) to proceed from when we start the PXE boot and when the unit loads into Windows PE.  It sits there saying "Loading files..." and thats where it sits for that time. Lower spec'd models, such as DELL 7xxx series, proceed much quicker.  We are using Secure Boot, with UEFI when we PXE boot.  We use same settings on DELLs when we PXE boot. If anyone is also experiencing this issue, we would love to know a fix, as it is adding build time to what is otherwise a fantastic unit.

Read other answers
RELEVANCY SCORE 42

Yesterday night 10 o Clock I have worked. then I close the my laptop again I open the same Laptop today morning 9 o clock it is showing blank screen what I do please help me thanks lot.
 

A:lenovo R61 LAPTOP not booting O/S WINXP

Do a system recovery or restore with the discs that came with PC make
And of course you had all your personal files backed up right?
if not pull the drive out and put it in another PC get them and then do the recovery.
 

Read other 1 answers
RELEVANCY SCORE 42

Hi, I bought my laptop with windows 7 pro , later i requested for windows 10 pro recovery and lenovo sent to me a 16GB USB recovery drive containing windows 10 pro version. Problem i am facing it i can not boot my laptop from this USB. As i checked there are window 10 pro files in USB but i can not see an iso image in the USB , and when i go to my system bios option make usb as first bootable device then boot the system it do not recognize that a bootable usb exits or boots from it. Kindly supportSnapshot of files in USB is attached

























snapshot.JPG ?80 KB

A:Lenovo X1 Carbon 3rd gen not booting from the Wind...

Boot into the BIOS.  Hit F9 to reset defaults.  Then, under startup, change to UEFI only.  Reboot.  Hit enter when you see tha splash screen, then F12.  Boot foom USB.

Read other 1 answers
RELEVANCY SCORE 41.6

Hi all,I have several USB sticks that contain a bootable version of Ghost.  It should be noted that these all work fine with other lenovo laptops (e.g. L450, T450) when booting/imaging from USB 3 ports- but although the T560 boots into ghost, when selecting the USB drive in the dropdown options from within ghost there are no files listed - even though I know for sure that the USB stick does contain files. Wondering if the newer chipset on the T560's is having an effect here with the USB 3 ports. Anyone else having issues booting from the T560 USB ports ? Cheers V

Read other answers
RELEVANCY SCORE 41.6

Hi Team, I am getting an issue with PXE booting my X1 Carbon 20FB. I have plugged in the default 'PCI LAN' adapter that came with it. the option is called 'PCI LAN: IBA CL Slot 00FE v0106'. I have other options, but they're windows boot manager and the HDD.  I have turned off secure boot, and have legacy and UEFI boot enabled. i have also tried with either one on and off.  When booting from here, I get the DHCP request, and when i try to hit F12 to start building from network, it seems to not register me hitting F12 or it skips passed it? Please help.  Thanks,

Read other answers
RELEVANCY SCORE 41.6

First thing I did was download a Windows 10 boot file onto a USB. I go through Repair Your Computer and all that until I get to trouble shooting. When I go to command prompt, right after i type in "Bootrec /rebuildbcd" and I type A (for all), it tells me "The requested system device cannot be found."
I've tried looking up help but I can't find any answers that help me. :/ What am I doing wrong?
 

Read other answers
RELEVANCY SCORE 41.6

Hello. I have Lenovo G580 for 3th. year (so far i just added 4GB of ram (total 8GB.)) and i have  this problem with my notebook for like secon d week . I have  this problem second time , first time i was not trying to solve it, it just went away and notebook worked fine . But 2 days ago problem started again , so i try to type about it here in hope to get help  . The problem is : everytime I start the PC the screen is black (not turned on even),power and battery LED are ON , the CDROM checks itself (it makes that sound of spin) , the fan turns ON but right after it turns OFF and WEBcam light is ON . And the notebook stays in this state for solid 4 to 8 minutes then the screen comes to live and shows Lenovo logo fan starts spining (realy fast becouse the CPU was heating all the time and fan was not spinning at all) , and windows 10 starts booting fine and evrything works fine . But sometimes notebook turns itself off while it is in this state of booting or what becouse CPU gets so hot that it turns off .  I tryed to find what may cause this long booting or turning on :i have updateed all drivers that i could . i tryed to turn on notebbok without RAM in it to at least get a error messege but no response .  I took out the HDD but no help (but with RAM in it).then without CDROOM no help.then without battery and with battery but same resoults.And thats kinda all what i can say about my problem .I would be very glad for eny help.Have a n... Read more

Read other answers
RELEVANCY SCORE 41.6

Hey guys, windows 7 unit which the owner says he suspects has virus but he also told me that his company checked for viruses but did not locate any, I ran a few virus scans but those did not produce anything. Symptoms are when I boot, it sometimes goes to windows but takes a long time and just doesn't get to the desktop, it is hanging after the logon screen. In safe mode it goes to desktop in normal time and laptop functions as normal, any ideas why it works as normal only in safe mode but can't reach the desktop in normal mode please?.

A:Lenovo B570 laptop booting problem

Some program or startup is causing the slowdown. You can do a clean boot and from there add services until you find the one causing the problem. It would be a good idea to disable your startup items also.

Read other 13 answers
RELEVANCY SCORE 41.6

I don't know which OS in on this unit, if it's 8 or 10 but when I power on the only screen I am seeing is the Boot Menu screen with 2 options showing exactly as below:
 
1; Windows Boot Manager
2. eMMC Card0: Sandisk iNAND 64gb
 
Any option I choose between those two then ENTER brings it back to that same screen, pressing ESC does the same thing. I tried F111 and F12 at power on to see if there is a recovery or reset option but only that boot screen shows up, help please?

A:Lenovo ideapad 100s-141BR not booting

It's ok, the HDD is shot

Read other 1 answers
RELEVANCY SCORE 41.6

Hello,

Im new here. So yesterday instead shutting down my laptop what I did is sleep mode it. When I got home I tried turning on it but it didn't so I plugged my charger but my laptop didn't light up (showing that the charger is plugged in the laptop). Please help?

Thanks in advance

A:Lenovo ideapad z410 w8.1 not booting up after sleep

this is happening to me too.
Currently I disable bluetooth device,then renable it and it works till next time computer sleeps.
Last update did something to bluetooth.

Read other 3 answers
RELEVANCY SCORE 41.6

Hi there, i just received my T470, i already have an ssd so i decided to replace the original hard drive with it. I have purchased a windows 10 education version. (free with the school) I have made with the window7 tool a bootable usb stick. After disabling the SecureBoot and passing the bootmode from "UEFI" to "BOTH" in the BIOS i installed windows 10 from the usb stick.  Here is the issue : After installation the computer restart but restart on the installer at the beginning. When i press F12 at launch there are 3 options : - Windows Boot Manager- USB generic storage- My SSD  When i remove the usb stick and start the screen pass from "Lenovo" to the boot menu with 2 options :- Windows Boot Manager- My SSD  But trying to start from them is doing nothing.And the boot menu come back each time i press enter. It seems that the computer is not able to boot with the new SSD but i don't understand why. when i enable secureboot again it does not change anything. Can you help me with this ?     

Read other answers
RELEVANCY SCORE 41.6

Hi there, i just received my T470, i already have an ssd so i decided to replace the original hard drive with it. I have purchased a windows 10 education version. (free with the school) I have made with the window7 tool a bootable usb stick. After disabling the SecureBoot and passing the bootmode from "UEFI" to "BOTH" in the BIOS i installed windows 10 from the usb stick.  Here is the issue : After installation the computer restart but restart on the installer at the beginning. When i press F12 at launch there are 3 options : - Windows Boot Manager- USB generic storage- My SSD  When i remove the usb stick and start the screen pass from "Lenovo" to the boot menu with 2 options :- Windows Boot Manager- My SSD  But trying to start from them is doing nothing.And the boot menu come back each time i press enter. It seems that the computer is not able to boot with the new SSD but i don't understand why. when i enable secureboot again it does not change anything. Can you help me with this ?     

Read other answers
RELEVANCY SCORE 41.6

i installed windows 8.1 using pendrive after shuting down that laptop is not starting. During boot it is not showing anything.Nothing is happening even after i press f2 or f10 or f12.my laptop is lenovo g570 please help me.

A:lenovo g570 not booting after installing windows 8.1

Hello sagarap and welcome to the forum! How did you create the pendrive, from an ISO and where from? Any errors during installation? What OS was on it before? After install did you make sure the BIOS was set to boot from the hard drive?

Some more info would help.

Read other 5 answers