Over 1 million tech questions and answers.

How to configure wifi modem having router with DSL modem ?

Q: How to configure wifi modem having router with DSL modem ?

Hello,
I have a BSNL wireless modem having inbuilt router.The modem has some DSL problem and cannot use the ethernet port to connect to my desktop.So I bought a new Baton DSL modem without wifi facility.

I now need the WIFI connectivity to connect with my phone for browsing net.

For that I connected the Ethernet port of new DSL modem with the old BSNL wifi modem and applied the following configuration.

I changed the IP address of router from 192.168.1.1 to 192.168.1.2

But I get only WIFI connection to connect to phone and not correctly getting the connection on desktop through the ethernet.Sometimes i get the connection and sometimes the connection lost.

I attached some images here.

pls help me to fix the problem.

Thanks & Regards

RAKESH BOSE

RELEVANCY SCORE 200
Preferred Solution: How to configure wifi modem having router with DSL modem ?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: How to configure wifi modem having router with DSL modem ?

Hi there,

On the second router, DHCP needs to be disabled and assign a fixed IP within the router's IP scope (with Wi-Fi capability) i.e. 192.168.1.3 (make sure that 192.168.1.1 to 192.168.1.3 will be in the IP exclusion list).

Read other 7 answers
RELEVANCY SCORE 102.4

Just moved in and brought my ADSL wifi modem Belkin F1PI241EGau with me, but over here there is cable and the provider supplied me with their modem motorola Surfboard SB5101E. I would like to connect these two to use the wifi. Would that be possible?

Thank you
 

A:Can i connect my adsl2/2+ wifi modem/router to cable modem?

Not really. The ADSL router doesn't have the correct WAN interface. You need a standard router with an Ethernet WAN connection.
 

Read other 3 answers
RELEVANCY SCORE 96.8

I am having a BSNL(India) broadband connection with modem ZTE ZXDSL 831 AII. I am using a dail up for connecting to net.

Because of this i cannot connect it to my Wifi router Dlink DI 524 .

Previously i had a modem which need to be connected using dail up connection it was always connected i only had to enable or disable it , and could be easily be connected to WiFi.

but eventually using it with WiFi it became kaput ( i dont know y, but the modem started to behave weirdly and could not be connect later ) hence it was replaced by a BSNL technician . and he told that now there is no other solution than to connect the modem using dial up. because of which i cannot use my wifi .

Can nebody please explain me ,what all setting need to be change to use my Wifi with the modem, because i believe if it cud be done before y not now.

please let me know as soon as possible.
 

A:please help to configure modem and Wifi

I don't know about the "AII" part, but the ZTE ZXDSL 831 is an ADSL modem/router. It may be acting as both, or it may be "bridged" to act as a modem only.

I also don't really know what you mean by "dail up." Since you apparently have (A)DSL service I assume you probably mean PPPoE and your account/password. If so, then ...

If the modem/router is acting as a modem only you would specify that configuration type in the D-Link's WAN section.

If the modem/router is acting as both then you have a choice of ways to use the D-Link. To simply daisy-chain it the WAN is configured for (the default) dynamic connection and you need to make sure that it is not using the same LAN subnet as the modem/router (I think that the defaults are different).
 

Read other 1 answers
RELEVANCY SCORE 95.2

I am trying to connect my DSL modem to a DLINK router with no success. I am able to get into the DSL modem but not the router. I have tried 2 different routers and get the same results. My computer shows it is connected but it is not.

The DSL modem is an ActionTech M1000 and supposedly is a modem/router. It works fine directly connected to the computer.

The routers are DIR-615 and a DI-604. I have used the DI-604 in the past with no problems.

For both of them, I connected from the modem to port 1 on the router. Then from the router's WAN to the computer.

I turned off DHCP in the modem and got the same results. It is PPPOE and according to them it is dynamic, not static.

I powered everything off and on and still no connection.

Any help would be appreciated.
 

A:How to configure a DSL modem and Dlink router

Read other 7 answers
RELEVANCY SCORE 87.6

Hi,

I recently bought dlink D2750U WIFI ADSL modem/router, for my ADSL internet connection.

But I have now changed my ISP, who provide internet via cable(not telephone line). The ISP guy provides a cable modem(old modem) along with it.

I have connected my PC this way:
Cable modem -> Router -> PC through RJ45. I am able to access internet from my PC, but I am not able to get wifi working on the router. And I am logging onto internet through a dial up connection.
Questions:
1) Please help in configuring the router to get wifi working.
2) Also, my default gateway seems to be either 0.0.0.0 or blank. So, I am not able to login to the modem unless I remove the modem connection. Please let me know if I am doing anything wrong here.

Here are a few more details:
Output of ipconfig: http://pastebin.com/Zr9Eb7L7
 

A:Using dlink D2750U Wifi Modem/Router As a Wifi Router

Hey Narain. The D-Link unit you have appears to be a combo unit (modem and wireless router) since it connects straight to the RJ-11 phone line. This unit won't work with an ISP that provides service by way of coax cable. The D-Link will work if you want to use DSL, but you need a cable service compatible modem or combo modem/router if you use cable service.

ftp://support.dlink.co.in/broadband/DSL-2750U/manual/DSL-2750U_C1_Manual_IN_1.00.pdf
 

Read other 6 answers
RELEVANCY SCORE 87.2

I'm switching from AT&T U-verse to Comcast since comcast can offer speeds up to 5x faster.

As you might know At&T uses ethernet as incoming signal vs. Comcast that uses 75 ohm cable.

I need to buy a new modem and router to install the new Comcast service.

I have two questions:

1) What is better? the combo modem/router units (i.e. Motorola SBG6580) or buying a separate stand-alone modem Motorola 6141 modem + Netgear N750 wireless router)?

2) I do have one issue to overcome. I have one TV in my house that is wired for cable only. That is, it has a cable run going to it. It's too difficult for me to install an ethernet run to it, so I'm stuck having to use the cable run. Are there modem/routers that have a cable OUT so that i can feed this TV its hard-wired signal?

Thanks,
bob
 

A:Solved: Modem/Router combo units vs. stand-alone modem + router?

see attachment
 

Read other 2 answers
RELEVANCY SCORE 86.4

my HP 15 116 laptop wifi cannot connect to wifi router modem AND it keeep on saying "cant connect to this network" whereas it  can work perfectly fine on smartphone wifi hotspot . please fix it ......... DONT MAKE ME REGRET ON BUYING HP LAPTOP ....

Read other answers
RELEVANCY SCORE 86.4

HI! i'm just curious to know if there was a way of connecting my USB modem in such a way that i can use it to have wireless access in my house (more specific room).

Currently i have a Cisco Wireless-N Home ADSL2+ Modem Router. it has a DSL port and 4 ethernet ports. i can alreadly pick up the wi-fi signal when i just switch the router on but obviously theres no internet connection yet.

am i over complicating issues or is this not possible? please help urgently
 

A:Usb modem with wifi router possible?

If you are currently using DSL for your Internet connection, is there a problem with replacing the USB modem with the Cisco Modem router?
 

Read other 1 answers
RELEVANCY SCORE 85.2

I'm a bit of a rookie when it comes to Networking but here goes.

I've got a D-Link DSL-604+ 22Mbps Wireless router with built-in ADSL modem and a D-Link DI-624 108Mbps Wireless Broadband router.

Obviously the DI-624 that I recently purchased doesn't feature an in-built modem so instead of blowing $50 on a D-Link ADSL modem with Ethernet connectivity I was hoping to use the ADSL modem feature in my old Wireless router (604+) as my modem for the DI-624.

I called D-Link support but unfortunately after an hour of following live instructions from their support staff, I ended up nowhere.

They instructed me to disable DHCP and NAT features on the 604+ and plug an ethernet cable into it's LAN PORT 1 and plug the other end into the WAN PORT on the 624.

I plugged an ethernet cable into the DI-624 LAN PORT 1 and into my computer's Ethernet port in order to configure the DI-624.

After configuring the DI-624 via its web configuration web page, I could get the 108Mbps network up and running but without the access to DSL.

If anyone any of the above mentioned products and can provide a tip or a link to a guide or something, that would be great.

Thanks
 

A:Using a D-Link DSL WiFi Router as a Modem

Read other 6 answers
RELEVANCY SCORE 85.2

I currently have two cables. One cable is a yellow ethernet cable that is plugged into my motorola cable modem in the Ethernet slot. The opposite end is plugged into the Slot 1 slot in my Linksys wireless router. My second cable is a grey ethernet cable. One end is plugged into the back of my computer and the opposite is plugged into Slot 2 slot in my Linksys wireless router. All of the lights are on both my modem and my router as if everything is working okay. The internet works as well.
However, when I try to access my Linksys wireless settings by typing in http://192.168.1.1/ in my address bar, it says the connection has timed out. It says this each time.
Now, when I move my yellow ethernet cable, that is plugged into Slot 1, into the Internet slot in my Linksys router, and I slide my grey ethernet cable to Slot one, I restart my router and I am now about to access http://192.168.1.1/. However, though I can access these settings, I cannot browse the internet. When I go to google or any other website, it says page cannot be displayed. Therefore, I cannot easily toggle between the Linksys settings and my internet, without moving around wires and restarting my router.
I'm doing this because I'm trying to configure my router with WiFi so I can use my Nintendo DS. Can anybody tell me why I'm having such difficulty with being able to view the Linksys settings and keep my internet connection at the same time? By the way, my Linksys Wireless Router is a WRT54G. My O... Read more

A:Router and Modem WiFi Issue

Well, the modem has to connect to the WAN/Internet connection or you won't have any success here. What's happening now is the computer is connecting directly to the modem and using the router as a simple switch.

Do NOT try to configure the router using the wireless connection! Connect it with a cable for configuration, then you can disconnect it once you get it all configured.
Reset the router to factory defaults by holding the reset button down for 15 seconds with power on.
Turn off everything, the modem, router, computer.
Connect the modem to the router's WAN/Internet port.
Connect the computer to one of the router's LAN/Network ports.
Turn on the modem, wait for a steady connect light.
Turn on the router, wait for two minutes.
Boot the computer.

When the computer is completely booted, let's see this.

Start, Run, CMD to open a command prompt:

Type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

Read other 3 answers
RELEVANCY SCORE 85.2

So Comcast wants me to use their high speed router/modem but the Linksys router I have (plus their modem) has been working quite well for many years.

They promise my speeds will be higher. Right now I'm at 54 Mbps. No problem here, if it ain't broke...

Should I just install it?
 

A:Should I use Comcast's wifi router/modem over my own?

Read other 8 answers
RELEVANCY SCORE 84.4

Hello,

I currently have the NBN with optus using the the Sagemcomm modem router, it is located at one end of house and front of house has a few wifi weak spots. I am looking to make wifi signal stronger. The sagemcomm is 802.11n, are you able to connect a 802.11ac modem router to this?

What would be best to go, buy a second wireless modem router to connect to Sagemcomm by Ethernet cable or a wifi extender?

For the wireless router modem I have been looking at the TP Link archer D9 and for wifi extender the Netgear Ex7000.

Look forward to your reply, think I am getting myself confused with it all.
 

Read other answers
RELEVANCY SCORE 84.4

HEY Guys,i am new to this community.
Now,I have been dealing here with a problem.I am buying a WIFI ROUTER+MODEM under INR 2500.Now the problem is that.....
First see the picture of the router i am thinking of buying.

Now will this support DSL connection or not because in the amazon questions menu somebody answered to it as to being a DSL router.
This is its NAME:
TP-LINK TL-WR940N Wireless N450 Home Router
Now,if the above is not the one i am wanting then please suggest me some under INR 2500($37.50 as on 23/07/2016).
Also please tell me what can i do if i have bought the modem but want to use DSL conection.If DSL doesn't work then other options are also invited.
 

A:Wifi Router+ADSL Modem.CONFUSED!

Read other 16 answers
RELEVANCY SCORE 84.4

Hello, my internet connection has recently stop working through my wifi router ( DLINK DIR 835). However when i connect my computer to the modem through an ethernet cable it works perfectly. I have already tried a full reset several times through the setup server provided by DLINK (192.168.0.1), still nothing works through the router i just get an orange light flashing. Please help, i have already contacted my ISP and they cant figure out whats the problem either.

Thanks for reading any advice would be appreciated!!
 

Read other answers
RELEVANCY SCORE 84.4

hello, I have a problem connecting wifi router(airlive wt-2000r) to my ADSL modem(webstar epc2203ed2.0) using utp patch cable. When my PC is connected straight to the ADSL modem everything works like charm. But when I connect modem with wan port on the router and router with my PC I get no internet access. The network shows as unidentified network and win7 troubleshooter says: Default gateway not available.

Connecting them two devices seems pretty simple and I donīt think I am doing anything wrong so what could be the problem?

Any help would be very appreciated. Thank you. This is my ipconfig /all
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Milan>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Milan-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce 10/100 Mbps Ethernet
Physical Address. . . . . . . . . : BC-5F-F4-17-54-DF
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::2171:2f34:e005:45d8%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.186(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 22. listopadu 2012 16:35... Read more

A:connecting wifi router to adsl modem

can we see an ipconfig /all when connected to the webstar epc2203ed2.0 only
its possibly showing as a router
 

Read other 1 answers
RELEVANCY SCORE 84.4

I have a 3com Switch 4400 and a netgear BT internet router / modem (4 port)

BT router > 3com switch > PC's

I have around 10 Pc on my network, 7 of them are connected to the 3com and the rest via wifi.

i need the 3 com router to issue the ipaddrsses and give access the the internet via the BT modem / router / AP.

I have tried looking on many forums but no help, i can get the 3com to issue the ip addresses, but then i have no internet. Or set the d.gateway to the bt router but then i am unable to have the 3com to issue the ipaddress.

please if anyone can help
 

A:Bt wifi router/modem & 3 com Switch 4400

Read other 6 answers
RELEVANCY SCORE 84.4

Hi,
I'm using windows 8 OS, and using Reliance DSL broadband. When I connect to internet directly through modem, Internet is accessed, but when I use D-Link DIR-524 router, It shows you are offline and shows limited connectivity.

Ip configuration through wired connection is as below

C:\Users\Hiren's>ipconfig

Windows IP Configuration
Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Wireless LAN adapter Local Area Connection* 11:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Wireless LAN adapter Wi-Fi:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : local

Ethernet adapter Ethernet:

Connection-specific DNS Suffix . : reliancebroadband.co.in
Link-local IPv6 Address . . . . . : fe80::7c31:1e6b:a3eb:12aa%3
IPv4 Address. . . . . . . . . . . : 123.237.231.77
Subnet Mask . . . . . . . . . . . : 255.255.240.0
Default Gateway . . . . . . . . . : 123.237.224.1

Tunnel adapter isatap.reliancebroadband.co.in:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : reliancebroadband.co.in

Tunnel adapter 6TO4 Adapter:

Connection-specific DNS Suffix . : reliancebroadband.co.in
IPv6 Address. . . . . . . . . . . : 2002:7bed:e74d::7bed:e74d
Default Gateway . . . . . . . . . :

Tunnel adapter Local Area Connecti... Read more

A:Internet connected through DSL modem but not through Wifi Router

I also tried friend's TP-Link router, with my Cable, Then it connects perfectly.
 

Read other 2 answers
RELEVANCY SCORE 84.4

I am usually pretty savvy with networking but this one really has got me. I have searched all over teh Intarwebs with no success solving it.

Basically, here's the issue. I'm in Mexico, and I want to set up a VPN (specifically HideMyAss, HMA) so that I can use my Roku and generally stream things from the United States.

TELMEX has given me a Alcatel-Lucent I-240w-q router which connects to the fiber line they have run to my house.

Separately, I bought a ASUS RT-N16 wifi router because that is the one that HMA says can be programmed to be the central "tunnel" into their VPN. I upgraded the RT-N16 firmware to DD-WRT's most recent build.

I have access to the config sections of both routers so I can modify their settings at will.

So what I need to do is connect the Alcatel router to the Asus router in such a way as I can use the Asus router as the primary access to the Internet (I wanted to set this up BEFORE I get the HMA subscription so that I could confirm it worked before I shell out for HMA).

I would deeply appreciate any assistance at all in setting things up so it goes through.
 

A:Connecting fiber modem to wifi router

You'll need to check with Roku as to whether this is a violation of the terms of service. Based on what I'm seeing, Roku has specific appliances for different countries. I can easily see that what you're doing by accessing US programming from Mexico is a violation of the terms of service; more specifically the programming owners will probably have issues with streaming to foreign countries.
 

Read other 3 answers
RELEVANCY SCORE 84.4

My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.

In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there any way to do this? Is there a way to disable the modem in the SBG901?

Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection. I am using Windows 7.

Thanks!
 

A:(Comcast) Connect Modem To Wireless Router/Modem Combo!

Is there any way to do this? Is there a way to disable the modem in the SBG901?Click to expand...

Perhaps a really skilled electronics engineer or technician could take it apart, separate the modem from the router portion and add an ethernet WAN port.
 

Read other 2 answers
RELEVANCY SCORE 84

Hello Guys,

I wanna Know That I hab a nokia siemens SL2_141 modem which is not in use...beacause I dont have anymore BSNL connection. Now I am using A Wireless Modem of MTS. Recently I have Buyed New Phone I wanna Use wifi...
So ,Wanna Know From You Guys...

HOw Can I connect Internet of my Wireless Modem to The Wifi of nokia siemens SL2_141 Modem.I have Attached A photo So that U ppl Understand properly..

Pls, Help me out with this Problem
OS-Window 7 (32bit)

Uploaded with ImageShack.us
 

A:Connect a Wireless Modem to ADSL modem for Wifi

The "nokia siemens SL2_141" is a modem/wireless router combo; I assume that "A Wireless Modem of MTS" is also a modem/wireless router combo.

If my assumption is correct you can use the Nokia as an ethernet switch and wireless access point ...

JohnWill's procedure (Aug. 30, 2008) for configuring a secondary router as a switch and, optionally, wireless access point follows.

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If ther... Read more

Read other 3 answers
RELEVANCY SCORE 83.6

My DSL modem/wireless router wont broadcast the wifi signal i need to know if it is just defective or a setting that can be turned off, It was working just fine and just recently stopped broadcasting, it works just fine for a direct connection. (It is a regular windstream wireless modem/router.
 

A:Windstream DSL modem/router wont broadcast wifi

you can enable/disable wireless in most router , from the configuration pages

log into the router and see if enabled

also there is often a light on the front panel showing if WLAN is on/off

whats the make and exact model of the router
 

Read other 2 answers
RELEVANCY SCORE 83.6

Just hooked up to att uverse ,they installed a att200 modem/router ,I have 12 mbps internet. I cant seem to make it hook up to the router
I have tried to enter the info on the printer keypad and throught the computer. computer is pent. 4 ,xp,

I was able to connect my laptop and kindle to the router.
I am not sure if the printer is recognizing the router or vice versa.
in general I dont know what is happening

I just found out it will print from my laptop,so I think my printer is connecting to the router,correct?
just tried to print from laptop again and did not work.
the wifi light on the printer is off.
it used to work great with the other router before att upgraded me

Printer is a epson workforce 520

It is a motorola router
 

A:AT&T installed new router/modem now my printer will not connect wifi

It worked, then didn't work? What? :S

Maybe check the wifi encryption. Make surei t's WPA2 and not anything else.
 

Read other 7 answers
RELEVANCY SCORE 83.6

Hi

I am trying to install a new ethernet modem/router to replace my speedtouch usb modem given to me by Orange.

However when I power down unplug the old usb modem and plug in the new ethernet modem/router nothing happens. I have gone to network connections and clicked on LAN and clicked obtain an IP address automatically. Within network connections I also have the Orange connection which I have also tried doing it on.

Am I being completely stupid here? Can I not use the new modem/router that doesn't belong to Orange?

The modem/router I have is a D-Link G624T.

If someone could give me some advice I would appreciate it.

Thanks!

PS I have also tried using the IP gateway thing and it just says the page cannot be displayed...
 

A:How do I change modems?? USB modem to an ethernet modem/router??

Do you have a user name/password for that account? You normally have to program the WAN section of the modem/router with that information to get a connection.
 

Read other 3 answers
RELEVANCY SCORE 83.6

When I try connecting my PC to my cable modem via Ethernet cable there is no internet access, but it does say its connected ( windows xp and 7...2 different PCs). But when I plug in my wireless router directly to the cable modem, I get internet access, what gives? I did reset everything and this problem still occurs. I'm not a total noob when it comes to networking, but this is baffling! I did troubleshooting over the internet, no help at all

(btw for folks who know about ps3...When my ps3 is directly connected to the cable modem I get NAT type 1, and online play works flawless. yet why wouldn't doesn't the internet work on my pc?)
 

A:cable modem to pc, no good...modem to router to pc works..help

Brand and model of the cable modem?

For "my PC" connected to the modem please show ...

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 3 answers
RELEVANCY SCORE 83.6

I have a Netgear DGN2200 (N300 Wireless ASDL + Modem Router) that I got from Goodwill. There is no WAN port behind the router... only LAN ports I see. How do I setup my Arris Cable modem to this Netgear Modem Router? I need help PLEASE!

Link to Netgear DGN2200: http://www.netgear.com/home/products/wirelessrouters/work-and-play/DGN2200.aspx

Link to Arris Cable Modem (PDF): http://www.arrisi.com/product_catalog/_docs/_specsheet/060510_Touchstone_Telephony_Modem_TM502G.pdf
 

A:Netgear Modem Router & Arris Cable Modem

if its ADSL you cannot use it as a router on a cable modem, its designed to connect to the telephone line and has a modem within the device
 

Read other 1 answers
RELEVANCY SCORE 82.8

Hi,

I have a Fiber Optic connection at home, where the Fiber Optic modem is connected to my WiFi router. The problem is that in order to connect to the Internet, I have to first connect to the WiFi (WPA2) and then dial-in via PPPoE into the Internet. I provide the ISP username and password in the second step.

I am using Windows 7, and have created the PPPoE connection as shown in the attached screenshots.

I have to connect to this PPPoE every time I need to connect to the Internet. I have had to configure this on all my laptops, and have to connect using each individual machine where I need an Internet connection. This is a big pain, as you can imagine. Further, I want to connect my Nexus One to the home WiFi Internet connection, but since it doesn't have PPPoE support, I can't do this.

I went to my router settings (3Com 3CRWDR200A-75), and found something that seemed promising. In the Internet Settings section, I saw a place to provide the PPPoE username and password.

However, this hasn't helped. I still have to connect using the PPPoE connection in Windows

Does anybody have any ideas/tips? Any help would be appreciated, as this is getting frustrating.

Cheers,
Wild Thing
 

A:Configuring PPPoE on my WiFi router instead of my Fiber Optic modem

Since you're connecting from the router you can probably delete the PPOE connection from Windows.

Curtis
 

Read other 2 answers
RELEVANCY SCORE 82.8

i have wimax usb modem and tenda wifi router with rj45 ports. how do i connect them, please im not so good at computer so i will request step by step procedure. i dont want to buy a new modem.
 

A:Want to connect Wimax USB modem to tenda wifi router w311r+ on XP

Read other 7 answers
RELEVANCY SCORE 82.8

Just bought this belkin router. Linked one computer through LAN and 4 devices through WIFI

For some reason my WIFI devices are not able to read or detect connections to the LAN network..


Can someone help me with this ?i found a similar thread but not sure how to work this problem out

http://forums.whirlpool.net.au/archive/1427502

A:Belkin Share Wireless Modem Router WiFi and LAN not linked

Welcome to Windows Seven Forums.

Check these links for more information.

Belkin : Support : Setup Assistant for Routers

Belkin : Support : Configuring Wireless Security

Read other 1 answers
RELEVANCY SCORE 82.8

Hey everyone,
I'd really appreciate any help you guys can give on the issue...I'm at my wits end at this point...

So anyway, about a month ago my old 2wire modem pretty much kicked the bucket for good (after about 4 years of more or less dedicated service with the occasional hiccup here and there, I was kind of saddened yet relieved) and I was left without internet for a few days. I contacted my ISP with the issue, and after a bunch of failed restart attempts on their end (I told them the damn thing was dead already, but they were insistent on making sure I wasn't bs'ing them) they finally relented and decided to send me their new Pace 4111n router/modem.

A few days later, low and behold, I had a new Pace and guess what? IT HAD WIFI!!

The reason why this came as such an interesting surprise was because my old 2Wire that my ISP had originally provided us with was simply a modem with no router/wifi capabilities on it. In order to bypass the lack of Wifi, I had to purchase a Netgear N300 router and had it hooked up to the 2Wire for years with no connectivity issues.
Anyway, with the new Pace in hand, I put my old Netgear away and plugged the new baby in....and here is where things kinda went downhill....
Now...my old set up was kinda strange...I used to have the 2Wire modem hooked up to the Netgear router and in between had a Grandstream HT502 Voip phone adapter plugged in (we have the need in my household for long distance phone service, and in order to ... Read more

A:WiFi Connectivity Issues with Pace 4111n Modem/Router

Read other 16 answers
RELEVANCY SCORE 82.8

I have an internet connection that I have extended to my Brother in law's house, next door. At the moment, I basically have two LAN cables coming out of my modem/router, one going to my computer and another, extended cable, going to his computer.
However, he wants to use his spare modem/router, which has wifi capability, to allow his son to use his own computer downstair with only wifi.
Therefore, will there be any conflicts if I simply splice in a Lan cable or add a lan socket for the second modem/router (wifi location.) at the appropriate point along Lan cable 2? See diagram below.
If there is a possibility of conflict what would be an alternate wiring method?

Thanks,
Tom.
 

A:Adding extra wifi (modem/router) to my already extended network

Good drawing and this will work just fine. In fact, that's what I use to get access at the far end of the house. Here's the trick;

router#1(lan slot) ---- (lan slot) router#2 with wifi​
Notice that #2 WAN slot is left empty! This places all systems on the same subnet of the router#1 {what you are doing is making router#2 act like a switch which has wifi support (y) }

* Give router# a unique LAN address (If #1 is 192.168.1.1, then make #2 192.168.1.1) This will allow each to be manage via a browser connection
* in router#2 disable DHCP. This forces #1 to be the manager of the entire network and it will handout all IP addresses
Personally, I use the MAC addresses of my devices to enable router#1 to use Address Reservation of IP address for all devices attached to #1 (ie I map the devices to the range 1.2-> 1.10)

Then set the DHCP range in #1 to 1.100-1.50
These will be used for all devices attached (wired or wifi) to #2

Optional:
All systems can then use the firewall to allow or deny access for one or both halves of the network. EG: I permit access for 1-10 and 255 while denying 100-254​ALL system must allow the top-end address 255 as that is the broadcast address that is used to hand out the DHCP data.
 

Read other 1 answers
RELEVANCY SCORE 82

First of all let me start off by saying that my modem is defective and overheats so i lose my dsl sync every hour. Found out it was defective by numerous hours of scouring the forums. Anyways i recently found a router/modem combo and was wondering if i could just use it solely as a modem seeing as that i already have a wireless router.
 

A:Router/modem combo used solely as modem.

Read other 16 answers
RELEVANCY SCORE 82

So I am updating my churches network and came to a setup I have never seen before. No one at my church knows anything about the setup except when they built the addition (about 5 years ago) they ran "a bunch of Cat5". They ran 3-8 jacks in every room. I have a closet full of about 50 cat5 cables of which only 16 actually have RJ45s on them and only 5 of which actually go to a computer. That stuff I was able to figure out. What perplexes me is the hardware setup.... I have seen modem to router to switch.

This install has a Comcast Modem with a built in 4 port router. 2 lines go to separate magic jack pro jacks. One is a straight cable to a wireless linksys router. The last is a straight cable to a 16 port switch. There is then a crossover cable from the wireless router to the switch as well. So on the switch port 15 goes direct to the modem and port 16 is a crossover to the router and back to the same modem..... I can figure out for the life of me why there is a loop going on here.

In either case the setup worked. So the duplicate line did not have an issue. I am so lost.
 

A:Modem to Router to Switch back to Modem, what....?

I would disconnect the cable going from the switch back to the modem/router combo. You're right. This loop is not proper. Loops should never exist on a switched network. I'm curious as to whether traffic is being forwarded around the network properly or if the switch being used has spanning tree support and might have shut down one of the ports wired up to the upstream network device.
 

Read other 2 answers
RELEVANCY SCORE 81.6

I have some issues with my newly bought laptop. Once i try to connect to the wifi, if keeps (instantly or after a couple of minutes) shutting it off. It is only the home network, i can connect to my phone's hotspot and it works well. I have all the drivers and they are the most up-to-date. What can cause the issue and how should i try to fix it? I am not an expert in the topic so please write in details Smiley Happy Thank you,

Read other answers
RELEVANCY SCORE 81.6

 WHEN I CONNCET WIFI IT KILLS MY ROUTER .. SOLVE PLEASE THANKS 

Read other answers
RELEVANCY SCORE 81.6

I am trying to get my parents Kindle Fire to work. They recently purchased a Motorola Modem/Router which is hooked into the desktop and works fine. I want to get their new kindle to work and can not seem to figure it out. Their operating system is Vista which I can upgrade to Windows 7 if that would make it easier. When I click on setup the WiFi part of the installation wizard cd that came with the Motorola it says there is not a network adapter. I know what that is however I do not know why I would need it when the desktop is hooked directly into modem/router and I just need the WiFi for Kindle. Is there a simpler way to get this working? I figured I would try you as you are the expert in this field. Any help would be greatly appreciated. thank you
 

A:Motorola Modem/Router for Desktop to setup WiFi for Kindle Fire

Read other 14 answers
RELEVANCY SCORE 81.6

I have tried many things to get a new Yoga 910 laptop on my RT-AC5300 wireless. The router is rock solid until the Yoga 910 connects via wireless and BAM: both the Cable Modem and Router become unusable. The Router Admin UI is not reachable, and a simple reboot will not clear the problem. I have had to do a factory reset 3 times now on the router.I have turned off Wifi Sense and Hotspot 2.0 options as well.I have reset the network adapter, flushed DNS, flushed ARP, etc. etc.I have updated drivers, searched for similar problems and get nothing.The WIRED connection on the new Yoga works fine.Any ideas??jim

Read other answers
RELEVANCY SCORE 81.6

hi,

I need help on bridging Belkin N150 F9J1001V1 modem router (primary, connected to internet using ADSL) and Linksys WAG54GS modem router (which needs to be bridged). I would appreciate if detailed step by step procedure is provided.

A:bridging ADSL modem router and another modem router

can you explain exactly what you want to do ?
and give IP address, of each router

Read other 7 answers
RELEVANCY SCORE 81.6

Hey Guys. what i need is some help turning my modem/router combo into just a modem so i can use a different wireless router.
My problems with my current combo are that for gaming (pc xbox and ps3 primarily) i have huge connection problems that would all probably be solved with some simple port forwarding. the problem with that, is that my ISP disabled port forwarding and DMZs on the model modem/router thing we have. Networking is not my strong suit so this hasn't gone so well for me in attempts prior to this.

We have an Ambit cable modem/wireless router combo. there is no model number on the modem itself however in the setup page it lists "Cable Modem : DOCSIS 1.0/1.1/2.0 Compliant" which is looking like it may be a model U10C019.

also. inb4 wrong login: user/user. ISP changed admin pass and will not give it to me. i already spoke to them about this garbage.

new router i want to use is a Linksys wireless router. i already know how to do all the major setup on those. its just this ambit one is trash.

thanks for any help you can give me.
 

A:modem/router combo to just modem for use with new wireless router

Not much, if anything, we can do. To configure the modem/router into bridge (modem only) mode you have to login. If you don't have the login/password the only thing to do is reset it to factory default settings.

Two potential problems with doing that ...

a. They may have disabled that function also.

b. You have to know the settings needed to connect. (Usually not a problem with cable service.)
 

Read other 2 answers
RELEVANCY SCORE 81.6

Info about my computer (should it be relevant) is below.

Short Story: I desired a new router/modem just to see if it would improve internet consistency. However, I ended up buying just a router. I have a modem and can link them up. Should I keep this setup, or switch back to my old Router/Modem combo, while looking for another Router/Modem?

Long Story:
My internet, for the most part, is fine. However, I still experience the occasional disconnect. My internet will go off for less than a minute about 5x a week. This is fine for browsing, but sucks for gaming. My ISP is AT&T, and I have 3 Mb max DSL. Years ago, it started having a bunch of disconnects after I tried an upgrade (6 Mb max) for a year. The techs came out about 6 times. As a result, I downgraded my service back and got an AT&T 2Wire Router/Modem combo out of the deal. I know people say this device sucks a lot, but it's been at least doing its job. General browsing is fine, gaming has the disconnect problem only sometimes, and there's only one device to think about.

However, I've recently started wondering if the quality of the modem was in fact affecting the consistency of the connection. The techs tried different modems when troubleshooting everything, but none were high quality.

So, I got my eye on this:

http://www.amazon.com/NETGEAR-Wirel...=UTF8&qid=1374145157&sr=8-1&keywords=wndr4500

I ended up buying it at Best Buy (they had it for sale). However, me being a complete dum... Read more

A:Separate router and modem vs Router/Modem combo...

i would not see any advantage

but why not try it for a week and see if it disconnects - that is what you are trying to fix

also you wont get a faster speed if the download is set to 3Mbps and all wireless modes B,G,N will be faster than 3Mbps anyway

How many devices do you have connected to the router and when you get the disconnect is it for all of them

it maybe a dns issue - but you would need to see if the new modem/router setup has resolved the issue anyway
 

Read other 2 answers
RELEVANCY SCORE 78.8

Hi, I have a strange question that im hoping can work (for a fortnight at the most lol)

I have just joined Virgin Media on 20meg connection. They sent me out an Ambit E08C013.00 modem but forgot to send out the router. Then the engineer installs the wallbracket lobsided! But anyway, im getting away from my question.

I have to wait up to 2 weeks for my router and in the meantime, my computer is upstairs and my connection is downstairs! I dont want to buy a router that will last me 2 weeks, so I decided to dig out my old BT Voyager 2091 router. I connected it to my Netgear FS208 v2 ethernet network switch and now I am trying to get it to broadcast my BB signal from my Ambit modem (which is also connected to my Netgear switch)

I can now connect to my wireless router, but it will not broadcast my broadband.

Is there a way to fix this? Or do I have to wait till my new router arrives?
 

A:BT router/modem with Cable Modem

Read other 7 answers
RELEVANCY SCORE 78.8

I have a ZyXel Q1000Z DSL Modem/Router combo and it's only connecting me at 130 mbps so I'd like to use my own router, a DIR-655 to connect me at 300 mbps. There isn't a WAN port coming out of the Q1000Z, USB port and 4 LAN ports.

How can I do this?
 

A:DSL modem/router combo as modem only?

Cazca said:





I have a ZyXel Q1000Z DSL Modem/Router combo and it's only connecting me at 130 mbps so I'd like to use my own router, a DIR-655 to connect me at 300 mbps. There isn't a WAN port coming out of the Q1000Z, USB port and 4 LAN ports.

How can I do this?Click to expand...

Can't the DSL is the input and ALL connections to the device will (internally) use the router portion. The bandwidth you see is NOT restricted by the internal router however - - it's the DSL itself.
 

Read other 2 answers
RELEVANCY SCORE 78.4

Hi everyone, this is my first post here. I've trawled the net for ages but have found nothing. I believe I have a unique situation here and would love some help from some net savvy people. I have strong computing skills, but keep away from networks if possible. Hope someone here can help, would really appreciate it.

Here's my current setup:
- HP Pavillion Laptop with Windows 7
- Receiving internet from a USB connected wireless modem (Huawei model E160E)
It all works well, internet is fine, I'm happy.

Why I want to share this network connection:
I have a couple of iphones and a Nintendo Wii and we would like to connect them to the the laptops internet connection.

Other things I've tried first:
I DO understand "Connectify" is out there and have tried it but it just fails every time I've tried it, the devices that try to connect all just sit there trying to connect and time out.

My possible solution found:
So what I found deep in my cupboards is a Belkin N Wireless Modem Router (Model F5D8633-4). It's a relic from my days of having an ADSL connection. This was back in the days when I used to have a physical phone line. Ahh they were the days, a physical connection to my house. Imagine that!

What I intend to do with the the Belkin relic:
I want to still receive the connection to my windows 7 laptop as I currently do, but have that connection shared over the belkin wireless modem router so that the nintendo wii and iphones can then co... Read more

A:Unique Q: USB Huawei Wireless Modem to feed house via Belkin Wireless N Modem Router

You enable Internet Connection Sharing on the internet connection and configure the Belkin as follows.

JohnWill's procedure (Aug. 30, 2008) for configuring a secondary router as a switch and, optionally, wireless access point follows.

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. [You will not need a cross-over cable if one of the "routers... Read more

Read other 1 answers
RELEVANCY SCORE 77.2

... and I see something on the web that says XP doesn't support ISA! Is that true? There are still a lot of good motherboards around which include ISA support ... my latest one is the first I've had that doesn't.

But if I put an old ISA ISA AWE 64 in a system and built it with XP does this mean it wouldn't see it?
 

Read other answers
RELEVANCY SCORE 76

i use my android smartphone as my modem and i need help to configure it to make it more secure from hackers.I wanna know how to reach my modem configuration page since "192.168.1.1" is not working for me.Need help on how i should find my default gateway and configure my modem!!!
 

Read other answers
RELEVANCY SCORE 76

Hi guys,

I have an ADSL TP-Link modem model TD-8817 version 6. I want to configure it in bridge mode. The only thing I know about that is my VPI is 0 and the VCI is 35. Does anyone know how to do that step-by-step please?

Thanks.

A:How to configure ADSL modem

Step by Step instructions hope it works out for you http://whirlpool.net.au/wiki/adsl_mo...er_bridge_mode

Read other 2 answers
RELEVANCY SCORE 76

Hi I have a SpeedStream 4200, right now the way I connect to the internet is I have to doble click on the icon on the desktop and hit connect, that it says a bunch of things like " Connecting to WAN min port" then I am connected.

I know there is a way to configure your modem so you are always connected to the internet and you dont need to connect each time. It is like you have to configure your modem as a router or something, can someone help me? or atleast explain?
 

A:How to configure modem, so its always connected to the net?

Read other 11 answers