Over 1 million tech questions and answers.

pin assignment for keyboard cable

Q: pin assignment for keyboard cable

i have 3 t410 laptops one with no screen and the power button went bad on the keyboard that is currently on it. i had gotten it to boot up a time or 2 by touching the 2 end contacts-one on each side- together but now there is no response from that. my plan for this pc is to sit on a docking station connected to a 50" flat screen to use netflix and the kodi app. will be running mint on a ssd so basically i want to use it as a firestick with 8gb of ram. i have wireless key boards, ect. so my plan was to just solder a wire to each pin and just touch them together to boot up as this will stay on 24/7. eventually i will replace the keyboard when i find another deal on ebay for another t410 for parts. i have not been able to find anything designating which pins connect to what. any help will be much appreciated!

Read other answers
RELEVANCY SCORE 200
Preferred Solution: pin assignment for keyboard cable

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 58

i've just bought a microsoft wireless desktop 1000 mouse and keyboard package, and while the mouse works perfectly well, i can't seem to get the keyboard in order. for a start, i get the 'no keyboard detected' error message during the boot sequence; then, when i boot up having plugged in my old PS/2 keyboard instead (then unplugged it obviously), i find that only the 'start', 'alt' and one or two other keys work on the new wireless keyboard....why would that be?!

naturally i want the new keyboard to occupy the IRQ1 slot, but xp (sp3) doesn't allow you to manually reassign....even if i try reinstalling the new keyboard, no luck. it's not even as if i have a lot of peripherals installed to take up all my IRQ addresses. is there some way i can tell my bios to accept a wireless usb input device as the default keyboard, and hence give it the IRQ1 slot?

of course the keyboard manual and microsoft online help are no use - i can't even find any descriptions of the same problem on this and other forums. does anyone have any advice how i can get the new keyboard working? or just any suggestion to keep me occupied rather than tearing my hair out? infinity thankyou's in advance!

Read other answers
RELEVANCY SCORE 58

So I bought a new keyboard but it is the same, the solution that I found for the l, 'T is another plug in to usb by usb!
Not very convenient for a laptop ..

Tell me where it comes from and if there is a solution. Thank you

Read other answers
RELEVANCY SCORE 56

Sorry for my English, this is an automatic translation.Can you change the assignment of the keys of my keyboard by other letters or signs present on the virtual keyboard (example: Euros) ? My X1 Yoga has a touch screen.The Sharpkey software does not succeed and believes that my keyboard is Querty type while my keyboard is Azerty type.I thank you while waiting for an answer.

Read other answers
RELEVANCY SCORE 43.2

i have an btc 5201 keyboard and i have a stray cable that i don't know where to connect please help https://photos.app.goo.gl/6dlDFKbgmgxojsX03
 

Read other answers
RELEVANCY SCORE 42.8

The cord on my keyboard is to short so I'm looking for an extension.

I have a Microsoft keyboard, does this mean I need to buy a special extension cable for this keyboard or can I just go to ebay or where ever and buy any old kind?

Thanks in advance.
 

A:Question: Keyboard Extension Cable

Any extension cable will do as long as it fits. Your local computer store would have one or most electronics stores that have computer parts and accessories. Radio Shack also has them.
 

Read other 2 answers
RELEVANCY SCORE 42.8

Hello to everyone

As i'm new to this forum, as welcome note i have problem to present.

Before few months i bought 2 USB extension cables for my mouse and keyboard.
They are about meter and half long, and in that time i did not have any problems with them, until last night.
In one moment i unplugged keyboard from USB extension cable and after that after i plugged it again, the keyboard did not work, not any kind of message or sound after you plug in something to usb port. So i tried plugging in mouse in same extension cable and mouse worked, but after switching keyboard to another ext.cable it did not work again.
Only way for keyboard to work is to plug it in directly to PC.
I tried uninstalling USB drivers so let windows install them automatically, but same nothing happen, only mouse is working ... :S its weird, don't know what to do as booth extension cables are obviously working. Tested with mouse. Keyboard is working as i said before i tested it plugging in directly. Never seen this kind of problem.


Help appreciated

A:Extension cable / keyboard problem !

When you unplugged the usb cable (key board), was the PC powered on? Sometimes doing so can cause such issues as you are experiencing. Generally a reboot will set things wright.

What does it look like in the device manager, are there any yellow triangles?

Have you tried using different usb ports with the extension cable?

Read other 7 answers
RELEVANCY SCORE 42.4

Hello, all.Have strange problem with keyboard and power sorce cable.Problem exists only when power cable is pluged in to loptop.Problem:When holding any button for longer time ~5s or more. after releasing it, it shows that button is still pushed.For example:While playing Counter Strike GO, and useing WASD buttons to move. I hold W to go forward. after moment when i want to stop. i release W button, but may character still goes forward. Same thing happens with other buttons. A,S,D,K,V,Shift,Ctrl... any...Problem disapiears when i plug OUT the power cable... But you cant use loptop without cable all the time. So maybe someone have ideas what is happening with my loptop and have any solutions? 

Read other answers
RELEVANCY SCORE 42

i tried to rewire my backlit keyboard by splicing the cord and connecting a regular usb cable. the color coded wires were different. the keyboard had 1 yellow, 1 red, one green and one white, while the usb cable has 1 black, 1 red, 1 green and 1 white. i connected all of the colorcoded to its color and was left with a yellow from the keyboard, and 1 black from the usb cord. Can anyone tell me how to splice these cords together? I know it is possible, because I know someone who did it. I just cannot get ahold of them. thank you for any help!
 

A:was trying to rewire backlit keyboard to usb cable new puppy chewed up!

Hello and welcome to TSG!!

If you have the old USB end, and a meter, you can trace the wires to the connector pins. Alternatively, you can do some surgery on the old connector to trace the wire color to pin, but that doesn't help with the new cable. Try to find someone with a meter or some sort of continuity checker.
 

Read other 3 answers
RELEVANCY SCORE 42

Hi All,
I have a Lenovo Twist laptop. I spilled coffee all over the keyboard ruining it. I took the keyboard out to replace it and broke the thin black clips that hold the ribbon cables to the motherboard. Everyone I spoke with winced when I told them what I was looking for and I cannot find them anywhere on the internet. Does anyone have any suggestions? Its the longer of the 2 clips. Maybe a quarter inch by one and a quarter inch black clip, really thin and small.

Thanks
 

A:Lenovo Twist Keyboard Ribbon Cable Connectors

It might be hard to find the exact clips for the Lenovo. Have you considered just taping or hot gluing the cable in place?
 

Read other 2 answers
RELEVANCY SCORE 41.2

This is not the first time this has happened, where having opened the laptop to tablet mode, a cable appears to have come loose. This means that the laptop no longer recognises that the laptop is back to laptop mode, so it doesn't reactivate the keyboard. Lenovo last time fixed this saying it was a fault with the assembly, but it has happened again, this time out of the 12 month warranty, and 3 months since it last happened. I really expected better quality of manufacture and the repair seems to have been very poor. This is my work laptop and the only computer I got, and any time spent without it is crippling to my work. I am currently using an external keyboard, which means working on the move is very inconvenient. I have a YOGA 51014ISK Is there a way for me to ask Lenovo to fix their repair mistake? I seem unable to find a proper way to contact/complain regarding this. I am not happy that I have to pay for repairs again for the exact same issue so quickly after the last "fix".  Otherwise, is there a repair guide I can follow to fix this myself? I didn't see one, and I'll need to reconnect the keyboard wire inside. Thanks for your time.

A:YOGA 51014ISK - Keyboard internal cable coming loose

Your description sounds more like an operating system problem, not recognizing a sensor.  Obviously, I cannot see the machine so I cannot be sure.
 
manual:
https://download.lenovo.com/consumer/mobiles_pub/yoga_510-14ast_510-14isk_510-15isk_510-14ikb_510-15...
 

Read other 1 answers
RELEVANCY SCORE 41.2

Is there any available information about the pinout  of ribbon-cable-connector for Precision M4600 keyboard? it is 10 pin connector, but have no idea what is power, what is ground and what are the signal pins. Is it using USB connection? or else?
I know this keyboard is compatible with other laptops  - Latitude E5520 E5520m E5530 E6520 E6530 E6540 Precision M4600 M4700 M6600 M6700.
I'm trying to fix the keyboard connector.

A:Precision M4600 keyboard ribbon cable connector pinout

That level of detail isn't going to be available -- if the keyboard has failed, it needs to be replaced.

Read other 1 answers
RELEVANCY SCORE 40.8

XPS M1730 internittant problem - machine crashes and will not reboot. Diagnostic error code 2000-0411.
After a couple ot tries it restarts.
Keyboard backlight has not worked for a long time - Fn rt arrow does nothing.
Any ideas? Could be a cable is not seated properly but I'm not anxious to pull the machine appart.
Thanks

A:Error code 2000-0411 Keyboard backlight cable not detected

MS72
Sorry to hear about the troubles.  The following link gives details on the basic diagnostics.
The code 2000-0411 means a possible failed hard drive.
http://support.dell.com/support/topics/global.aspx/support/kcs/document?&docid=DSN_300428&isLegacy=true#HDD
I suggest reseating the hard drive.  Disconnecting the drive and reconnecting it. Here is a link from the service manual on removing hard drives.
<ADMIN NOTE: Broken link has been removed from this post by Dell>
Once reseated and try diagnostics again.  If it gives the same error you will need to replace the drive.
 
TB

Read other 9 answers
RELEVANCY SCORE 39.2

I am currently studying C# and received a practice assignment for this:

Write a program for a teacher.The program should have an array that can hold the
test scores for 30 students.The program can randomly assign grades from 1 to 100 .
Determine the average score for the class.

This is what I came up with:

using System;
class Aprog{
public static void Main(){
int[] grade= new int[31];
int ctr;
System.Random rnd=new System.Random();
for(ctr=0;ctr<31;ctr++){
grade[ctr]=rnd.Next(0,101);
Console.WriteLine("Student{0}, Grade:{1}",ctr,grade[ctr]);
if(grade[ctr]>0 && grade[ctr]<50){
Console.WriteLine("F");
}
else if(grade[ctr]>50 && grade[ctr]<60){
Console.WriteLine("D");
}
else if(grade[ctr]>60 && grade[ctr]<70){
Console.WriteLine("C");
}
else if(grade[ctr]>70 && grade[ctr]<80){
Console.WriteLine("B");
}
else{
Console.WriteLine("A");
}
}
}
}

It works but some how it does not feel right or kind off sloppy. Does anyone know of a better way to create this application?
 

A:C# Assignment

Hi gfxrelay,

Never refrain from using methods to make the coding more readable :

Code:
[SIZE=2]using System;
class Aprog{
public static void Main(){
int[] grade= new int[31];
int ctr;
System.Random rnd=new System.Random();
for(ctr=0;ctr<31;ctr++){
grade[ctr]=rnd.Next(0,101);
Console.WriteLine("Student{0}, Grade:{1}",ctr,grade[ctr]);
Console.WriteLine(getLevel(grade[ctr]));
}
}

private static string getLevel(int grade) {
if (grade >= 80) return "A";
if (grade >= 70) return "B";
if (grade >= 60) return "C";
if (grade >= 50) return "D";
return "F";
}
}[/SIZE]

 

Read other 1 answers
RELEVANCY SCORE 39.2

well the assignment is to develop an abstract type for handling characters. Only handling 26 capital letters. I have this need help with CharSet.cc

//CharSet.h

class CharSet
{
private:
bool Contents [26];

public:
CharSet(); //constructor initializes set to be empty

void Add(char Value); //add character to set corresponding bool set to
true
void Remove(char Value); //Removes char corresponding set to true

void Union(CharSet ASet); //Union the set passed a parameter into set

void Intersect(CharSet ASet); //Intersects set passed a parameter
contains results of intersection
bool Member(char Value) const;
}//end class CharSet

Also have testSet.h which is my test

#include "Charset.h"
#include <iostream>
using namespace std;
void printSet(CharSet ASet)
{
for (char c = 'A' ; c <= 'Z' ; c++)
{
if (ASet.Member (c))
{
cout << c;
}; //end if
}; //end for
cout << endl;
}; //end printSet
int main()
{
CharSet Set1;
CharSet Set2;
CharSet Set3;

Set1.Add('A');
Set1.Add('B');
Set1.Add('C');
Set2.Add('B');
Set2.Add('C');
Set2.Add('D');
Set3.Add('A');
Set3.Add('B');
Set3.Add('C');

Set1.Intersect(Set2);
Set3.Union(Set2);
Set2.Remove('C');
cout << "Expect BC" << endl;
printSet(Set1);
cout << "Expect ABCD" << endl;
printSet(Set3);
cout << "Expect BD" << endl;
printSet(Set2);... Read more

Read other answers
RELEVANCY SCORE 39.2

I have W7 RC1 64 bit installed successfully on my new build. Its SLI and RAID. How come IRQ 16 has over a dozen assignments? From the graphics cards to the SATA/RAID controllers. Why is this IRQ so heavially loaded by windows?
TY

A:IRQ Assignment

  
Quote: Originally Posted by spyknee


I have W7 RC1 64 bit installed successfully on my new build. Its SLI and RAID. How come IRQ 16 has over a dozen assignments? From the graphics cards to the SATA/RAID controllers. Why is this IRQ so heavially loaded by windows?
TY



Could you tell us all about ypou coputer networking, raid contoller, etc

Ken

Read other 2 answers
RELEVANCY SCORE 39.2

i am a student, i have to give a presntation in 3 days titled
"modren transport protocols and their applicibilty"

i have been searching for it and found a few things on wikipedia, which are not good enough, so can any one help me please
thanks
 

A:assignment help plz

You are not going to find what you need here. Do the research. The fact that you can't even spell it means you have a lot to do.
 

Read other 2 answers
RELEVANCY SCORE 39.2

Hi guys! I am trying to find out how to assign hot keys to a specific action. Currently, I am having to copy and paste the BB code for font and color to every post I make on forums. [color=red][font=arial]this is what I type[/color][/font]

I would like to assign one of my hot keys to copy and paste this code so I don't have to do it manually every time. Anyone know how to do this? thanks in advance!
 

A:Hot key assignment

You can use the buttons that are along the top in the editing mode to make those codes automatically. Or you can use something like the free version of PhraseExpress to type any phrases you like with key combos.
 

Read other 1 answers
RELEVANCY SCORE 39.2

Anybody have any suggestions on where to start? thanks

You are part of a software development team. I am your project leader. Our assignment is to develop a virtual calculator for the University. We have decided to develop the calculator using C++. I have given you the task to develop another math library called (arrays.h). In this library you are to develop the following functions:

add, subtract, multiply
These functions will take an array of numbers, the array size and two integer numbers as their parameters. The two integer numbers represent locations in the array. It will add, substract, or multiply the numbers at the two specified locations in the array return the result.
It should be able to handle arrays that are doubles, ints, and longs.
Return values should be of the same type as the array.
divide
This functions will take an array of numbers, the array size and two integer numbers as its parameters. The two integer numbers represent locations in the array. It will divide the first number located at the position designated by the first integer by the second number located at the position designated by the second integer parameter. It will return the result.
It should be able to handle arrays that are doubles, ints, and longs.
If the value of the second number is zero, this function will display an error message to the screen and return -999 .
Return values should be of the same type as the array.
negate
This function will take an array as its first para... Read more

A:next assignment :-)

Read other 6 answers
RELEVANCY SCORE 38.4

I have not been able to find which port is assigned to which device in window7.in the device manager there is no reference to show to which port a device is assigned.could any one help me to be able to find a port assigned to a particular device.Thanks.

A:port assignment

Hi arif1, hope this helps. How to get a list of all open ports on Windows 7, Vista and XP? ? FAQforge

Read other 3 answers
RELEVANCY SCORE 38.4

I 've got a problem with macro assignments in vb6.
I 'd like to write the varible name to text1.box and assign the value of the same variable to text2.text , next to it on the form.
This way, I could debug the change of variables at the run time. But how ? Any help is appreciated.

 

Read other answers
RELEVANCY SCORE 38.4

I click on a google bookmark and it sends me to the Yahoo home page and not the bookmarked page. Don't understand why, it just started doing it. Can anyone help me out so my bookmarks work??? Thanks in advance.
 

A:Bookmark assignment

Sounds like you may have downloaded something that messed with your search preferences. Try making Google your default search engine.

You might also remove the Yahoo toolbar if it is installed. Disable the Yahoo add-in in your browser
 

Read other 3 answers
RELEVANCY SCORE 38.4

I'm having a problem with an assignment. I'm new to c++, so this shouldn't be too hard. Here's the instructions:

Revise the preceding assignment to distinguish resident and nonresident students. Input a residency status code followed by the number of hours enrolled. The status code is "R" for a resident, "Q" for the end-of-data-signal, and any other character for a non-resident. When a "Q" is entered, do not require the user to enter the number of hours enrolled. The letters may be either upper or lower case. The tuition rate is $52.00 per hour for residents and $110.00 per hour for nonresidents. Revise the final statistics to output (1) the average tuition paid, (2) the highest tuition paid, (3) the lowest tuition paid, and (4) the percentage of students who are residents. Use the format shown below.

My Problem: after typing in q, I still have to type in a number for "Hours" before hitting enter. Can anyone help me?

My code:
#include <iostream>
#include <iomanip>
#include <limits>
using namespace std;

//===========================================

int main()
{
const double RTUITION_RATE = 52, NTUITION_RATE = 110;
double Hours,Tuition, SCount,Highest,Lowest,AverageTuition,
PercentResidents,AllTuition,RCount;
char RCode;

SCount = 0;
RCount = 0;
AllTuition = 0;
Highest = 0;
Lowest = INT_MAX;
//===================================================================================

do
{

cout <&... Read more

A:C++ assignment problem

Read other 14 answers
RELEVANCY SCORE 38.4

I really have to finish my computer assignment and I am confused at few questions.

1) Say Computer A has a 1GHz processor and 16-but word size. Computer B has a 2GHz processor and 32-bit word size. Compare the processing speeds of these computers quantitatively. Show calculations.

2) Conversion from true-color graphic to black and white. Explain what the conversion did in terms of pixel bytes or bits.

3) If you run the CPU simulator program, you will find that it uses the system bus 12 times. Explain how this number comes about. (You must explain why based on how cpu operates. This will involve a little arithmetic. Show all).

The last questions I believe uses the concept of

1) Fetch
2) Decode
3) Execute
4) Store.

A:Assignment help on Binary

Asking us todo your homework eh? Review your textbooks on the subject matter.

Read other 1 answers
RELEVANCY SCORE 38.4

my whole class is so stuck with this, can someone please do it, its quit basic for most of the programmers on here

***Note

*We use Kawa 5.0 to run our programs
*please use methods and call each method as its needed
* Please use JOptionPane for message boxes

Heres the assignment

http://usera.imagecave.com/killswitch/jjjjjjjj.gif

i would be so greatful ... thanks in advance
 

A:Java Assignment ... Please Help

Read other 6 answers
RELEVANCY SCORE 38.4

I'd like for you give me an adobe photoshop assignment. Can you make it as simple as possible? I just want to learn how to use it.

Spent $620 at the USM bookstore and I don't know how to use it and I can't find a buyer. Might as well try to make it work.
 

A:gimme an assignment

Well....just a thought, but, you're nearing your 100th post, so why don't you try working on a custom avatar for yourself when you get to "senior member" status?

Like I said....just a thought! You may also want to hit random with this...those guys are great for coming up with "assignments"!

TT
 

Read other 2 answers
RELEVANCY SCORE 38.4

I 've got a problem with macro assignments in vb6.
I 'd like to write the varible name to text1.box and assign the value of the same variable to text2.text , next to it on the form.
This way, I could debug the change of variables at the run time. But how ? Any help is appreciated.
 

Read other answers
RELEVANCY SCORE 38.4

Replaced Geforce2 MX (32MB) with Geforce2 Ultra (64MB DDR). Card is made by VisonTek. Manual advises IRQ 11 as preferable. BIOS set to automatically select. Card was assigned IRQ 10, not shared. IRQ 11 is Ethernet card. Question: Is assignment of IRQ 11 to video card important enough to reconfigure BIOS manually? Does it make a difference in performance, or is it fine as long as it is not sharing the IRQ? Also, in Control Panel, under System>Performance, System Resources is only around 75-80 percent. After restart, will go up to only about 86 percent. I would have thought that a new video card, with more (and more efficient) onboard memory would have used less resources, not more. Any ideas?
 

A:GeForce IRQ Assignment

Read other 7 answers
RELEVANCY SCORE 38.4

I am a student studying MCITP in school, i really needed your help and my tutor/teacher gave this assignment:

3 Servers, 6 Switches and 200 Client Computers.

Question: "Plan how to set this up"
Thank you in advance
 

A:Urgent assignment

That description is a little vague.

We don't assist with doing peoples homework for them either.
 

Read other 2 answers
RELEVANCY SCORE 38.4

Is it possible for me to use my OEM copy of windows on my second hdd for a day to install my copy of windows for a class assignment?? I dont want to have to uninstall my copy of windows on this system I built for class to reinstall it in front of the instructor, I spent hours tweaking it. So i was wondering if I could just take my win 7 disk and my second hdd to class, install windows on that for the class and then uninstall it when I get done with the class?? Please help, it would be greatly appreciated.

A:using second hdd for class assignment....

I'm not sure if your plan would work. You have an OEM disk and they activate a bit differently than a retail disk. Maybe activation can be ignored temporarily as with a retail disk.

But you can certainly download an ISO of Win 7 from mydigitallife.info, burn it to a disc, install from it, and run it for 30 days without activation.

Read other 4 answers
RELEVANCY SCORE 38.4

I am trying to reassign an irq for a sony ieee1394 card. I added some com ports in 4 and 5, and it is in 10 I think. It has to have an isolated irq. How do I move it over?

qg
 

A:ieee1394 irq assignment

Read other 11 answers
RELEVANCY SCORE 38.4

Any one assist me with this please:
ATZ Publishing Company occupies three buildings - buildings A, B, and C. Building A has one room containing 16 computers and one printer. Building B has two rooms one containing 8 computers, the other containing 9 computers and one printer. Building C has three rooms two rooms containing 10 computers and one printer each and the other room contains 4 computers. The distances between the buildings are shown in the diagram (please see diagram). The owner of the company is keen to improve the efficiency of the business and is considering installing a client/server Local Area Network (LAN) based on Windows NT 4. All users need access to two centralised file and printer servers. The LAN infrastructure should be based on Ethernet technology and all design consideration should include 50% growth. The management is concerned about security and would like a networking solution that is fast, scaleable, reliable, and offers easy troubleshooting.
 

A:Networking Assignment

What have you come up with so far? Your ideas? Thoughts? Do you not understand how something would work? etc?

We decided here awhile ago that we don't just do other people's homework without you first giving it a go and you didn't give any indication that you've tried. You don't learn anything that way and it's cheating. Give us what you've come up with so far and we can answer any questions/probs you have along the way.
 

Read other 1 answers
RELEVANCY SCORE 38.4

Given an IP address range, select the correct subnet mask for the scenario. IP address: 200.4.82.0/24 You need to create 6 networks with a minimum of 28 hosts per network. What is the correct subnet mask and the 3rd subnet range?

This is the answer I came up with. I just need to know if I'm on the right track...

225.225.225.0 - 255.255.255.224
200.4.82.64 - 200.4.82.95

Thank you in advance,
Denise
 

A:Help with subnetting assignment.

Welcome

You are correct with the subnet mask. The netmask of 255.255.255.224 will give you 30 hosts minus 2 for network and broadcasting address. So your networks would be 200.4.82.0, 200.4.82.32, and 200.4.82.64.

How did you come up with the subnet mask?
 

Read other 3 answers
RELEVANCY SCORE 38.4

Hello. Does anyone know how to force Windows XP to assign a USB device to a different/specific COM port? Thanks.
 

Read other answers
RELEVANCY SCORE 38.4

New clients on my network always try to assign themselves a new IP instead of using 192.168.0.1 as their internet gateway. There is one client that functions correctly on the network and DHCP is enabled on it. I've tried manually setting the other clients as well as using DHCP and no dice. My home network was find once upon a time and poof, just stopped working one day. Thanks in advance for any help provided.
 

A:ICS IP assignment issues

Read other 11 answers
RELEVANCY SCORE 38.4

Hi All,
I am new in this forest and wish well to all. Im looking for a person who can guide me through to make DVI or VGA to Mac Adapter DB15/HDDB15 converter. Attached is the snap of Mac Adapter. I would be grateful for your kind help.
Thanks,
 

A:Need pin assignment for Mac Adapter

Looking for this?
http://www.si87.com/www_store/merch...re_Code=1&Product_Code=7031&Category_Code=ADP

or are you actually after the pin out
http://margo.student.utwente.nl/el/componen/fpinout1.html#PINOUTS_009
 

Read other 1 answers
RELEVANCY SCORE 38.4

hey everyone!

I need help working out a few more bugs in this code for my most recent assignment. this program's purpose is to input an integer and return it reversed.

the code i got so far is:

import java.util.Scanner; // Imports the java utility so we can use the Scanner class to receive input.
public class ReverseStringProject
{
/**
* Get string, run reverse method, output reversed string
* @param args
*/
public static void main(String[] args)
{
Scanner in = new Scanner(System.in); // Declares the new Scanner which looks for input (System.in)
String theString = new String(); // Creates a blank String, which the user's input will go into.

System.out.println("Enter a string: "); // Prompts user for input
theString = in.nextLine(); // Sets the user's input (in.nextLine()) to the string theString.

theString = reverseString(theString); // Function to be made that will reverse the string given.
System.out.println("The reversed string is: "+theString);

}

/**
* Will take any given string, and return the reversed of the string.
* @param theString The string variable sent to it to reverse
* @return the reversed string
*/
public static String reverseString(String theString)
{
//CODE START
String charString = new String();
int stringLength = 0; //variable to store length of the string
int stringLength1 = theString.length();

for(int i = stringLength-1; i >= 0; i--)
{
charString += theString.charAt(i);
}
//CODE END
return charString;
}
}
... Read more

A:more n00b assignment help

Read other 9 answers
RELEVANCY SCORE 38

Hi folks,

Trying to sort out a weird one here. Have a new motherboard in an old pc, with a clean os re-install on a new hdd (effectively a brand new pc), that for some unknown reason is picking up a foreign ip address for the integrated ethernet port every time the system boots.

The network connection is set to auto assignment via dhcp, the dhcp server is working just fine, as is everything else on the lan. If one "repairs" the connection, it picks up a correct ip address from dhcp and works fine. If one just leaves it alone, it eventually will get the right information and start working - but up to 20 minutes after the pc has been booted. Every boot, I am getting errors that network shares can't be mounted, and update servers can't be found etc. etc. It's just a complete pain to have to repair the connection, and re-establish all the network related linkages every time.

The address being chosen is always 169.254.91.143 with netmask 255.255.0.0 This address, and even the ip range it's in, has never existed on the local lan, even if there were some way for it to have been copied from somewhere.

I've not been able to find any reference to that ip address anywhere on the system, other than ipconfig when the system is faltering.

Any clues more than welcome....

Configuration is: MSI K9N6PGM2 motherboard (using integrated lan port, and XP drivers from MSI), AMD Phenom Quad core 9550+ processor, Win XP Home SP2 os
 

A:Weird IP assignment issue...

That is the default Automatic IP address that Windows assigns to an adapter that is not getting an IP address from the DHCP server. Try updating the drivers for the adapter.
 

Read other 2 answers
RELEVANCY SCORE 38

Working with a mainboard (BEK-5731) to build a PC, and having trouble with video card. (Have tried several video cards in PCI Slot 1, but they either do not work at all, present garbled info, or the monitor screen freezes up after a while forcing a reset to get things going again.)

When PC boots, under PCI Device Listing, Device Class: Display Controller shows IRQ=NA.

Under System Tools>System Info>Hardware Resources>IRQs, IRQ 11 was assigned to:IRQ Holder for PCI Steering, AND, Intel 82371SB PCI to USB Universal Host Controller. Not interested in USB, so, disabled this option in the BIOS. Now, the info that shows up is that IRQ 11 is Free!!

Appreciate some assistance on how to assign IRQ 11 to the Video card.

 

A:IRQ Assignment for a Video Card

Read other 8 answers
RELEVANCY SCORE 38

OK, i just reinstall windows, and it made my, what is normally C:\, now is F:\, and when i try to change it, it says it can't change it on a "boot device", so how can i change it?

A:Change HDD letter Assignment...

have you tried Partition Magic

Read other 1 answers
RELEVANCY SCORE 38

I installed a new disk into a machine and left the old disk as back up. I set the new disk to master and the old disk to slave. I then used ghost and took an image of the old disk and put it directly onto the new disk. Here is the problem.

The old disk maintained the C and D drive letter and the new drive with the system partition is G. I can play with the registry to change the system drive to C, but this will create several problems.

If I take an image of the new disk and then reapply it without the old disk in the machine which is using the C letter assignment used by windows, will the disk get the correct letter assignments? If this works correctly, it should also update the shortcuts and everything.

A:Drive letter assignment

Hi,

Here is the problem. You can't change the disk you are booting from, so you have to do a work around.

For example, if you can boot (don't know if you can) from the D drive and have the old disk in as slave, then you can probably change the old drive to maybe F or some unused letter. Then put that drive that you changed to the boot drive position (boot from the F drive) (assuming it keeps that letter you assigned it) With the new drive (now D) in as a slave, you can assign it an unused letter like C:, then when you put it back in as boot drive, you have accomplished what you want. Long process, but it works most of the time. I assume you know the process of changing the letter assignments, but if you don't let me know.

Don't forget, you have to deal with the boot drive in BIOS setup also so it selects the correct one to boot from.

Read other 4 answers
RELEVANCY SCORE 38

I've got an issue that I wouldn't think is as unique as it seems to be, due to my lack of being able to find information on it.

When I am at home, I have access to the control of my router (Linksys WRT54G) which I use the wifi on to connect my laptop to the internet. When I am not at home, I often do not have access to the router at which I am connecting, and I do use my laptop away from home quite frequently (work, friends' houses, etc).

The question I am looking to find is a way to automatically have my computer set up for DMZ while at home, either as a setting through the router, as a script to be run on my computer, or as a setting in windows. However, the difficult part is that when I am connected to any network other than my home network, I would like to revent to a Dynamic IP address assigned by the DHCP server in the router.

Having the router automatically assign a specific IP to my MAC address would seem to be the easiest way, but I'm not sure if mine can do that or not.

Other pertinent information:

Current system - Windows XP Professional x64 Edition (multiboot to Vista Beta 2 x64, possibly back to XP Pro 32-bit if I continue having issues with x64, mostly application compatibility)
Wifi card - Broadcom b/g WLAN card

Any suggestions would be greatly appreiated. Thanks!
 

A:Dynamic/Static IP assignment?

Read other 7 answers
RELEVANCY SCORE 38

I am trying to write a program that calculates income tax based on income. I cannot get any output from it, nor does it ask for any input (income). I do not get any errors-build is successful, what am I doing wrong?


import java.util.Scanner;

public class IncomeTaxCalcualtor {

public static void main(String[] args) {

}

public double computeIncomeTax() {

Scanner in = new Scanner(System.in);
double tax=0.0;
double income;
System.out.print("Please enter taxable income:");
income = in.nextDouble();

if (income < 50000) {
if (income < 50000) {
tax = tax + (income * .01);
} else if (income>50000) {
return tax + ((income - 50000) * .02);
} else if (income>75000) {
return tax + ((income - 75000) * .03);
} else if (income>100000) {
return tax + ((income - 75000) * .04);
} else if (income>250000) {
return tax + ((income - 100000) * .05);
} else if (income>50000) {
return tax + ((income - 500000) * .06);
}

System.out.print("Your tax liability is :" +tax);

}
return tax;
}

}
 

A:Income Tax Calculator Assignment

What happens when you import java.* instead of just scanner?
 

Read other 3 answers
RELEVANCY SCORE 38

I have 3 hard drives and one cdrom. They do not seem to be in an order of IDE1 master slave IDE2 master slave. it actually comes up IDE1 master partition 1 IDE1 slave IDE1 master second partition. I would have thought they went in a more routine order. What gives. I have not another HDD and a card which ends up myself having 4 ribbons IDE1, IDE2, IDE1(pci card), IDE3 (pci card). Just for simplicity I set them all to master/ or single. What determins their letter assignment? They definatly aren't being assigned in a manner that makes any sense to me.
 

A:What determines Device Assignment?

oK IM A DOPE i SHould have searched. I found my answer, though I still would like to know what determines the hdd letter ordering, though I learned how to change it.
 

Read other 3 answers
RELEVANCY SCORE 38

Hello all. I am a (nearly) straight 'A' university student, who despite having followed my curriculum exactly as intended and meeting all prerequisites, have found myself forced into a class with fairly moderate C++, without the school having yet given me any proper C++ training.. (I only know the basics currently, from my own experience.)

I currently have a very frustrating assignment, for which there is virtually no help for in any of my course materials, and the instructor does not even seem to know what he is talking about and gives me annoyingly vague, confusing answers whenever I email him questions (and now he doesn't even respond at all !)..

Please, I could really use some help as I am stuck and need to have this assignment done by Sunday, 11:59 MST, though I may be able to get it extended if necessary (but am not sure that would be allowed)..
I have ATTACHED the ASSIGNMENT INSTRUCTIONS (" Data Structures and Artificial Intelligience with Lab FALA07 - Sec B.pdf "), as well as the current state of MY CODE (" main.cpp ") in the .zip file. If for some reason the attachment doesn't work, I have also uploaded it to the following URL:

http://www.megaupload.com/?d=GG5YBANP

This is a Win32 console project done in Microsoft Visual Studio, as I am sure you would see from my assignment instructions.
Basically, I am stuck on the the Union and Intersection portions, as my course materials have no reference for how to do this whatsoe... Read more

A:NEED HELP FAST for unfair C++ assignment

Your problem is not stricking to your specs:

// insert a new value only if it is unique (not already in the set)
void Insert(int newValue) {

Your Insert function does not check whether the new value is unique. If it did, your Union function would probably work. Furthermore, you simply rewrote InsertFront! You might as well just call InsertFront from within Insert.

In fact, I think that's what they expect you to do - FIRST call search to check if the value is already there or not, and if not, use InsertFront to add it.

Personally, I would store the list in numerical order as this is significantly faster; however the above method will work without errors, and as I said, is probably what they expect you to do.

Intersection is a simple matter of adding everything in the first set that's a member of the second set.

Good luck!
 

Read other 3 answers