Over 1 million tech questions and answers.

Terminal Server license server(s)? RDP client for Windows2K?

Q: Terminal Server license server(s)? RDP client for Windows2K?

I'm looking at setting up windows 2003 terminal servers all over the place to replace the awful thing people are currently doing here - vncing servers with one small shared password among everyone <holding my hands over my ears for the backlash>. Don't blame me, it's another awful legacy I have to get rid of...

1. I've got to set up a Terminal Server Licensing server and was thinking about putting this on my second domain controller. I was wondering what would happen in this server dies, though. Is there some way of having resilience in this scenario? Perhaps a second Licensing server or something, the way you have 2 or more Domain Controllers?

2. Also, I know that Windows XP has an RDP client, I've used before on many occasions, but what about all the Windows 2000 clients that I still have out there. What should I do for them to access the new Terminal Servers?

RELEVANCY SCORE 200
Preferred Solution: Terminal Server license server(s)? RDP client for Windows2K?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Terminal Server license server(s)? RDP client for Windows2K?

I'm not 100% sure on #1, but I believe that the TS licensing becomes integrated into the AD, so if one DC goes down, the other one will be able to check licensing. On another note, if you are using the TS for administration only, I don't believe you needs the TS Licensing to be installed.

For #2, you can download the latest version of the RDP client from MS's website. It should also be available through Windows Updates, although I think Win2K isn't supported any longer, other than Critical Updates.

Read other 1 answers
RELEVANCY SCORE 111.6

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 103.2

Does anybody know how can I remove a license from a Terminal Server?
I don't want to remove a license server I just want to remove a specific license from the license server to use that license for another computer. when I go to Terminal Services licensing Tool in Windows I only get the option to diactivate a licensing server.
I'm using Win 2003.

thanks,

Steve
 

Read other answers
RELEVANCY SCORE 101.2

I'm trying to use a VPN connection with a remote server. I need to extract data from a server that needs this connection for security purposes. The only way to run the software on this server is to use a terminal server client connection. I'm using WIN XP, but the server is running NT 4.0 Terminal Server edition. Once I open up the terminal server connection, the VPN connection will not connect. Now, reverse logic, if I open the VPN connection first, the terminal server client connection will not work. Is there a way to have both open at the same time with the OS's I have currently? Or is there something I need to change to get this to work?
 

Read other answers
RELEVANCY SCORE 100.8

Hello my name is Adam. I am a desktop/lan admin for a warehouse supply company in New York. We run a strictly Windows 2000 domain with about 70 computers and maybe 3 or 4 Windows XP machines. I recently enabled a Terminal Services Server to allow 3 or 4 of my users to run database intensive Apps on the server. The reason for this is when they use specific functions in our "in house application" the app freezes up until it has finished its process (allocation of goods for large orders, takes about an hour tops). The app freezes up to do its job and the user is left with nothing to do because they cant touch the app until its done. So by enabling terminal services for them, they can run there allocations on the Terminal server, minimize it and keep doing there work on there computers.

Now, along with the Terminal Service Server, I am aware I need a Terminal service license server enabled on the network within 90 days. I have yet to enable a license server because I am somewhat unclear on its neccesity. I have read in the microsoft documentation

http://www.microsoft.com/technet/pro...s/default.mspx

that machines with Windows 2000 on them already have built in licenses and therefore you do not need to purchase additional licenses. The documentation also states that if you do not enable a license server, anyone without a pre issued license will not be able to connect. My question is this, if I am only connecting to the terminal services server via Windows 2000 Machin... Read more

A:Windows 2000 Terminal Services License Server

Read other 7 answers
RELEVANCY SCORE 100.8

Hello my name is Adam. I am a desktop/lan admin for a warehouse supply company in New York. We run a strictly Windows 2000 domain with about 70 computers and maybe 3 or 4 Windows XP machines. I recently enabled a Terminal Services Server to allow 3 or 4 of my users to run database intensive Apps on the server. The reason for this is when they use specific functions in our "in house application" the app freezes up until it has finished its process (allocation of goods for large orders, takes about an hour tops). The app freezes up to do its job and the user is left with nothing to do because they cant touch the app until its done. So by enabling terminal services for them, they can run there allocations on the Terminal server, minimize it and keep doing there work on there computers.

Now, along with the Terminal Service Server, I am aware I need a Terminal service license server enabled on the network within 90 days. I have yet to enable a license server because I am somewhat unclear on its neccesity. I have read in the microsoft documentation

http://www.microsoft.com/technet/prodtechnol/win2kts/default.mspx

that machines with Windows 2000 on them already have built in licenses and therefore you do not need to purchase additional licenses. The documentation also states that if you do not enable a license server, anyone without a pre issued license will not be able to connect. My question is this, if I am only connecting to the terminal services server via Windows... Read more

A:Windows 2000 Terminal Services License Server

IM moving my post to the Windows forum. Sorry bout that
 

Read other 1 answers
RELEVANCY SCORE 100

I have a NT Terminal Server 4.0 set-up with Microsoft client, as well as, Novell client. I can logon to the Administrators account just fine. When I log-on using someone else, I get an error stating that the logon script didn't take effect.
-An application error has occurredand a log file is being generated "nwlscrpt.exe"
-Then it looks for DrWatson log file directory and doesn't find it
-"Cannot open DrWatson log file
-"Windows NT error code=0

What do yo think this might be??
 

A:NT Terminal Server w/ Novell client

I think you should reinstall the client... Or isntall the ms novell client. That works for me.
--Adam
 

Read other 1 answers
RELEVANCY SCORE 98.8

I have the following:

Terminal Server 4.0 running an application called CLASS

100 seperate users are located at a remote sites, connecting via a WAN Router.
Users running Terminal client. Connects to Terminal Server, and runs
class. Each wants to print to a local printer from Class.

How to configure Terminal Server so that I can print from the terminal
server to my clients' printer, without mapping the printer at the Terminal
Server. In other words, I want to print to my clients local printer.
 

Read other answers
RELEVANCY SCORE 97.6

Some WIN 7 users (me for one) seem to have this issue after latest windows updates installed on 09-06-2016 (latest KB installed: KB3156017) when trying to open a terminal server connection: the current user and "use another account" option is displayed
twice. This is a company domain setup and updates are installed via WSUS.
Is this some kind of registry setting?

Read other answers
RELEVANCY SCORE 97.6

This problem has been bothering me for months, every so often client session hangs for about 10 seconds. If you using the mouse it just freezes and if your typing it will stop and continue after the pause. I've tried changing some settings like maximum throughput for network apps and changing application performance to none. But that didn't affect it. Has anyone else run into this problem?
 

A:{Resolved} - NT Terminal Server client session pausing

They just posted a knowledge base article to reference this problem.

The Knowledge Base Article for Microsoft is Q250042 Performance Issue and Delay in Keyboard Input. My experience throughout the TS world is a lot of TS administrators have run into this problem. Microsoft has a hotfix for this problem which will be run tonight. And is supposed to be fixed with the release of SP 6 for TS, which will not be released soon. I hope this helps alot of you out there.

[Message from Reuel: Just making the Knowledge base article a hyperlink to the article. Thanks for telling us about it]

[This message has been edited by Reuel Miller (edited 03-02-2000).]
 

Read other 1 answers
RELEVANCY SCORE 90.8

i have the server with windows 2003 SP1 and i executed replication active directory, domain controller on the new server, as i have two servers. all expect one client computer work ok.onthe problematically computer is with the windows me.
problem is:
when i shut down old server,the computer with win me drop out from domain and he don't see new server.when i power on old server the client computer work ok.i deinstalled the win me on this computer and i installed to him win xp pro but problem is same. this computer don't see new server and he don't see others client computers in network.
what i do?
i tryed to make new user account but nothing i can't because of this computer don't see new server.
on client computer light green indicator on network adapter (Realtek 8139d) all the time.
i use commands: ping with the ip address of server, with the name of server nothing, ipconfig /release, ipconfig /renew, ipconfig /flushdns, ipconfig /registerdns.

ip address of old server is 192.168.0.100 and new server 192.168.0.101.
maybe problem is when i type ipconfig in dosprompt on new server
i receive: DNS server 192.168.0.100 and DHCP 192.168.0.100

plz help me thanks
 

Read other answers
RELEVANCY SCORE 89.2

Hiya

By adding an additional server to your Microsoft® Windows® Small Business Server 2003 network, you can enable Terminal Server. Using Terminal Server, you can host your users' desktops. This can save your organization money by allowing you to extend the life of your desktop hardware.
After you have installed Windows Small Business Server 2003 and have completed the To Do List, you can join an additional server to your network and configure it as a terminal server.

System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Word or Word Viewer
http://www.microsoft.com/downloads/...45-57ef-43eb-802f-f274fd937400&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 89.2

I don't know if this is help for our server or Excel I am looking for. Here is the issue...

Whenever one lady is logged into a session on our server, she opens a word document that has an Excel worksheet embedded in it. The second she tries to click on the Excel worksheet, Dr. Watson makes a call and hits me with the following message...

Error in Excel.exe
Access Violation (0xC0000005), Address: 0x304632a3



When she tries to just open the Excel program, she gets this error:

Compile Error in Hidden Module: ThisWorkBook

This only happens to her, should I make a new profile on the server for her? Is there something in Excel I can do? I am so lost and MS Knowledge base has been of no help to me.
 

A:Excel Shutting Down on Windows NT Server (Terminal Server, Citrix Metaframe)

Try this, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q169718

And this, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q172211

Or look here for more, http://search.support.microsoft.com...Type=ALL&maxResults=150&Titles=false&numDays=
 

Read other 2 answers
RELEVANCY SCORE 88.8

Cannot access windows updates, any admin tools, av websites., cannot run spybot, internet explorer giving security settings warning, cannot change any of the settings.

HJT log file:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:08:50 PM, on 6/15/2011
Platform: Windows 2003 SP2 (WinNT 5.02.3790)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\Documents and Settings\administrator.#domain#\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Trend Micro\AMSP\coreServiceShell.exe
C:\Program Files\Trend Micro\UniClient\UiFrmWrk\uiWatchDog.exe
C:\Program Files\Trend Micro\AMSP\coreFrameworkHost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Trend Micro\Client Server Security Agent\tmlisten.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\rdpclip.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Broadc... Read more

A:Server 2003 Terminal Server cannot access admin tools

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you... Read more

Read other 2 answers
RELEVANCY SCORE 88.8

Hiya

Microsoft Windows Terminal Server lets users run Windows®-based applications on a remote computer running one of the Windows Server 2003 family of operating systems. This white paper contains testing methodologies, results, analysis, and sizing guidelines for Windows Server 2003 Terminal Server. Hewlett Packard working in cooperation with Microsoft to perform the initial sizing tests and data collection in HP labs. Microsoft performed the final round of testing and analysis collection using Hewlett Packard equipment. The tests were performed using Windows Server 2003, Enterprise Edition, build 3790.
System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Word
http://www.microsoft.com/downloads/...63-7c42-4372-ab37-d8c8987a71da&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 88.4

i need to run microsoft messageing on a maching i have that is the server for some ipaQs that we have. it is running windows 2k professional. do i need to upgrade to the win2k server in order to install this? and do i only need to purchase an upgrade if there is one?
 

A:upgrade windows2k pro to server?

If you are refering to Exchange as Microsoft messaging, then yes you need a server version and you can not upgrade 2k pro to 2k server.
 

Read other 3 answers
RELEVANCY SCORE 88

I've been having a lot of trouble with this and I hope someone here can shed some light on this for me...It's driving me crazy! Thanks in advance for any suggestions!

We're using Windows 2000 Server in Terminal Server/Application Server mode. the Clients are Win98 boxes. Every so often, (once or so every 2 to 3 months) all of a sudden, All the Printers will disappear and a reboot seems to be the only way to get them back. I've tried restarting the Spooler with no effect. I've gone to Microsoft's site and been unable to find anything on the topic.

Last time this happened my System Log was full (could this cause that?). The last entry was:

Event Type: Warning
Event Source: Print
Event Category: None
Event ID: 2
Date: 5/27/2004
Time: 1:41:35 PM
User: NT AUTHORITY\SYSTEM
Computer: NICO2
Description:
Printer hp LaserJet 1300 PCL6/DEB/Session 2 was created.

In addition to this error message in the Sys Log, I also receive the following two errors frequently and they were also the first two entries in the Sys log after rebooting:

Event Type: Error
Event Source: Print
Event Category: None
Event ID: 31
Date: 5/27/2004
Time: 1:41:57 PM
User: NT AUTHORITY\SYSTEM
Computer: NICO2
Description:
PrintQueue CN=NICO2-Generic / Text Only could not be created under Container LDAP://NICO1.nico.local/CN=NICO2,CN=Computers,DC=nico,DC=local because Mandatory properties could not be set. Error: 80070005

&

Event Type: Error
Event Source: Print
Event Category:... Read more

Read other answers
RELEVANCY SCORE 85.2

I usually can get in to the Bios setup during the Windows 2000 pro boot up process.

However, when I boot up Windows 2000 server on my other computer, I'm unable to get in to the Bios settings. I've try the DEL and F1 button during bootup and nothing seems to work.

Any ideas?? Thanks in advance.
 

A:{Advice Offered} - Bios setup in Windows2k Server

Greetings

That is a function of the computer's BIOS, not the operating system. You need to go to the hardware vendor's web site, and find out there how to get into the BIOS.

Cheers

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Website: www.xperts.co.za/multiboot

Every morning is the dawn of a new error...
 

Read other 1 answers
RELEVANCY SCORE 83.2

Hi,

I am having an issue with offline files created offline syncing back to the server. I have set up a network share to be available offline on a client computer. All files are available offline without issue. Here is the issue however. If I set the folder to work offline any file I create in the folder when it is offline just disappears when the folder comes back online, there are no conflicts or sync failures reported in sync center. If I create a new folder offline the folder does sync back to the server. Any changes made to an existing file are also replicated back to the server once the share is back online. So the issue is only with newly created files when the share is offline. I have not been able to replicate this error on any other file server in our environment, However I have recreated the issue with multiple shares with multiple Win 7 clients on this file server.

Steps taken so far.

Checked and reset permission levels on the share.
Recreated new shares from scratch for testing.
Disabled and enabled offline files on the client computer and cleared the offline cache.
Check various registry entry settings.
Disabled cashing on the File server.
Tested with XP the issue does not exist with XP.

I have spent hours researching this error online to no avail.

The clients are running Windows 7 Enterprise 64 bit
The File server is Server 2003 Standard 32 bit with SP2

Any help or ideas would be most welcome.

A:Offline Folder sync issue, Win 7 Client Server 2003 Flie Server.

I've seen the complaints about this problem but with no clear resolution. There are some hot fixes listed that may help, updating to Windows 7 SP1 is supposed to help in some cases but nothing seems for certain.

No way for me to recreate this problem but apparently others have the same problem.

Offline created files disappear after re-connect

Browse by Tags - The troubleshooters and problem solvers... - Site Home - TechNet Blogs

Administratively assigned offline files on Win7 client disappear from server (Network Steve Forum)

The Group Policy settings in the next link may have an effect on this problem.

http://mcpmag.com/articles/2003/11/0...ine-files.aspx

Read other 3 answers
RELEVANCY SCORE 83.2

There is a process running on my computer called csrss.exe
 
I went to http://www.processlibrary.com and looked it up and came up with 2 different things. One says it is a Trojan and needs to be removed. The same exact process name also says it is Microsoft client server runtime server and SHOULD NOT be removed.
 
How I am supposed to tell the difference so I do not make a mistake by either leaving it alone or removing it???

A:Process: csrss.exe (trojan or Microsoft Client Server Runtime Server?)

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/561994 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

Read other 2 answers
RELEVANCY SCORE 82

was trying to network my computer to the server but keep getting the message 'server not responding from client computer' can anyone help please.
 

Read other answers
RELEVANCY SCORE 82

Hi I'm working on a client/server with the Java programming language and trying to figure out how to protect my server. With my current Virus/Firewall protection suite theres nothing I can do to keep out unwanted Java applications on the port I choose to allow the Java SE Binary through for clients accessing the server application. ESET Smart Security 4 is what I am using. Does anybody know of a security suite that would allow only a specific Java application to get through the firewall? I'm not to sure on this subject because my firewall is identifying any Java application as only the "Java SE Binary" and not I'm sure if you can even really name your Java application like you would something you would write in C++. Any information would be appreciated, thank you.
 

A:Java Server/Client + Server Firewall Safety

Read other 6 answers
RELEVANCY SCORE 82

I have 6 computers in a workgroup that need to be synchronized to a workgroup server.  The server is a virtual Win 7 running on a Windows 10 host.  Neither the server or client computers have internet access.  I started the process by configuring
the host to use its CMOS clock as its time source, which seems to have worked. The client computers are not virtual and can communicate with the Win 10 host as I am able to RDP to the host from the clients.  I made the following registry key changes to
get that accomplished.
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\Config]
"AnnounceFlags"=dword:00000005

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\Parameters]
"Type"="NoSync"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpClient]
"Enabled"=dword:00000000

"SpecialPollTimeRemaining"=hex(7):00,00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpServer]
"Enabled"=dword:00000001

<-------End of REG file------->

After applying these changes, I ran the following 'w32tm /config /update /syncfromflags: NO 
I get a message that the command is successful.
These changes are based on the following post:
https://social.technet.microsoft.com/Forums/office/en-US/04865e36-d43d-4167-a07d-9f28fd4f22fa/how-do-you-configure-windows-time-synchronizati... Read more

Read other answers
RELEVANCY SCORE 82

A friend is moving his business, and the new business park that he's setting up shop in does not have anyway to get any wired internet to his building, excluding a T1 line, which he can't justify the cost of.

One windows 7 machine acts as the server, primarily for Quickbooks database, and there are two other windows 7 machines that are clients, reading off said database.

He's getting one of those usb dongles for wireless internet service, for the server only (the other two computers will be tethered to a smartphone for internet for QB and windows updates periodically).

They do NOT want to share the servers wireless connection to the other machines.

My only concern was if the server will continue to try to check the LAN for internet connectivity, or will it check both network connections when one fails, or is there a setting I can tell them to change to ensure it knows to go to the wireless dongle for internet all the time, without interfering with the workstations talking to the server over the LAN to get to the database?

The setup at the old office was business class DSL, they are using a relatively new Linksys router, which had the DSL authentication information.

Thank you!

A:LAN network for server/client only, USB hotspot for server internet.

I managed to find a solution this morning, for anyone that's interested, the whole article is here: Multiple Network Connections at the Same Time on Windows | Ivan Zlatev

But the short answer is, under the advanced properties of TCP/IP v4, uncheck automatic metric, set your internet to a value of 1, and the LAN to a value of 9999.

Read other 1 answers
RELEVANCY SCORE 78.8

Hi folks,
I am working with a company (that I have actually worked with for over 10 years on a consulting basis) and we are auditing our Microsoft Windows Server and server product licenses and preparing to upgrade Windows Server products.  We have ran into a snag, where the former System Administrator left the company a few years ago, however it was understood that the information regarding the VLSC was transferred to another partner in the company.  A new Systems Administrator has taken over, and we have determined that we do not have this information, including a Microsoft account username and password to access the VLSC and our Windows Server 2008R2 product keys, license agreements, SKUs, and downloads.  Unfortunately, the situation became took a turn for the worse about three months ago when the partner that had this information passed away.  No one at the company has access to this login information.  I currently administer most of their licensing, and have access to their much of their licensing information, download, product keys, etc., but I am clearly missing some very important ones.  I called Microsoft and they were of no assistance.  Since I am an administrator on the network, I can create a mailbox that the VLSC was probably originally registered under, however the VLSC says that Microsoft account is not even valid, not even prompting for the password.
I have a mailbox on their Exchange Server for their domain to prove I am ass... Read more

Read other answers
RELEVANCY SCORE 76.8

Hi,
I would like to know how to configure a Windows Server that will host a windows Diskless Client, I've read a lot of forums and blogs regarding this subject and I even tried to applied those summarized guide but until now I'm still stuck, and I hope someone
in this forum can help me or give me a detailed guide to this particular subject. I would really appreciate whatever suggestion or support that may give to me. 

Thank you,

Read other answers
RELEVANCY SCORE 75.2

now that i have all my users logging in remotely to the terminal server, they are filling up the c drive and it is having problems. how do i get the users info not to be housed on this drive? I want all the users to use the f partician.
All info has been greatly appreciated!
 

A:Terminal server

Read other 10 answers
RELEVANCY SCORE 75.2

Hi all hope someone has an idea because I am clueless.
helping out a Real estate office, they have Windows 2000 server which shares files and has a few apps, and runs terminal server for about 25 on and off users. The server is bogging a bit at the terminal database program, so i figured adding a second 2000 server to ease the terminal services load made sense. Also thought why not make it a bdc as well, good backup, but use the bdc for terminal services, double duty. My 30 or so accounts with settings already created so makes sense.

I installed the second machine, added it and promoted it to 'seconday server'. Within 10 minutes my users are populated from the pdc in user manager, beautiful. Except I can't log in to the bdc at all with anything but 'administrator". Whether through terminal services, or right at the console, any account other that administrator fails. "The system could not log you on, be sure username and password are correct" etc.

Am I missing something? Can I do what I'm trying to do?

Any help or clues would be appreciated!

Thanks all
 

Read other answers
RELEVANCY SCORE 75.2

Location One :--- Head Office

I have one Terminal Server which have local IP Address as what I am using the IP range in company. IP Address of the server is configured in my SGS Firewall and is linked with Global IP Address.

Location Two :--- Ware House

I have one computer in warehouse which is using Dialup connection to connect with the Head office to access one folder.

Please Help :---

How can I connect warehouse computer with this terminal server through Dialup.
 

A:Please Help Terminal Server

start with this ms article
 

Read other 5 answers
RELEVANCY SCORE 75.2

This morning i am having issues with my company's remote site connecting to our server. I have a facility here and everything is fine. The Remote site there are three machines. They have been connecting for years and this morning nothing. They get online but can not connect via RDP. Just errors out, can not connect. I can connect from home just fine. Oh and heres a weird part. The vista machine can connect but two xp machines cant. HELP!
Thanks
Steve
 

Read other answers
RELEVANCY SCORE 75.2

Think I probably know the answer to this, but worth a shot.

I've got a bit of software that I've loaded onto our server and would like to be able to be accessed by people logging in.

When I run the application, it comes up saying that it can't be run on Windows Terminal Server.

Is there any options that I can adjust to enable this or will it simply not run?
 

A:Terminal Server

Probably not.... it usually helps to mention the software name though.

If it expressly says it won't run on terminal server then I highly doubt it will.
 

Read other 2 answers
RELEVANCY SCORE 75.2

Can I add terminal server role to my domain controller? The domain contoller only holds the files of the folks in the active directory. No databases run on this computer.
As of now the DC will only allow just the two administrative log ins and I have setup the terminal services licenses for 150 users on another computer in the domain.

Thanks.
 

A:Terminal server

Read other 10 answers
RELEVANCY SCORE 75.2

Hi all,
My task is to allow my accountant access to my MYOB files. He tells me his clients usually do it through Windows Terminal Services (which I guess is the Terminal Server software). A few questions to start: How do I find out if its been installed; how do I enable it? and how do I get into the configuration of it? I'm new to this one but Ive got Logmein and XPUnlimited to work in the (distant) past ....
The other totally newbie question I have is .... Once its setup, what does the person that wants to connect to my machine do to connect?
Thanks
T.
 

A:XP and Terminal Server

XP does not have Terminal Services; TS is available on Windows Server versions only. Instead, XP has a part of it called Remote Desktop. Certain versions of XP can act as a Remote Desktop server.

What are MYOB files, and what type of access does he need? (Meaning, what is he doing with them?)

BTW, which version of XP do you have?
 

Read other 1 answers
RELEVANCY SCORE 75.2

I am setting up terminal services using windows 2000 server. Does anybody know of any good texts or documentation is on how to do this. I have some bits and pieces form all over the place but I thought somebody here might be able to better direct me.

Thankyou in advance
Shukran
 

A:Terminal Server

Here's a pretty good site: http://windows.about.com/cs/terminalservices/
 

Read other 1 answers
RELEVANCY SCORE 74.4

I just loaded up Windows 2000 Professional (Installed, same thing) how do I run/configure Microsoft Terminal server/
 

A:2000 Terminal Server

Do you mean the Terminal Services Client? You need a W2K server running Terminal services to connect to. the client is on the w2k server disk. Install that and configure to the server.
 

Read other 1 answers
RELEVANCY SCORE 74.4

On a shared printer from a NT Server I keep receiving an Event error 8775 Out of Disk space. I can print from NT server with any user I give permission to print with this printer. But when I install it on terminal server I can only print from administrator account even though the users have permission. This printer is a Deskjet 895C and connected to a Dlink printserver. I have a NT member server managing the que and is shared. I can't understand why it is not working! I just got done connecting a LJ4 with the exact print server and also connecting to terminal server and that is working fine.
 

A:{Resolved} - Terminal Server

I will answer my own question. I read on a website about the incompatability between HP printer drivers and NT Terminal Server. I used a Deskjet 660 driver in the place of the Deskjet 895 driver and worked and is currently printer for users on TS. Just wanted to share that in case anybody else runs into it.
 

Read other 3 answers
RELEVANCY SCORE 74.4

I cannot get any Terminal server clients to connect to our Exchange Server.
We run Terminal Server on a Windows 2000 server and are using Exchange 5.5 and Outlook 2000.
When I log into terminal server and try to setup a user profile I get an error "The name could not be resolved. The microsoft exchange address book was unable to log on to the Microsoft Exchange Server computer. Contact your system administrator if the problem persists.
I am able to ping the Exchange Server by the IP address.

Any idea?

Thanks

Jill
 

A:Terminal Server and Exchange

I have a feeling that its going to be something to do with Active Directory, and Users and Groups. Does the user whose profile you are trying to set up already have a user account in both the W2K domain and on the Exchange server?

This article offers a fix for a very similar problem, without really explaining why the fix is necessary.
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q255843

If you can't get Terminal Server to work, have you considered setting up Outlook Web Access, as this is really easy to configure and demonstrate to your users?
 

Read other 2 answers
RELEVANCY SCORE 74.4

I have my terminal service liscences set up as per device. Can I change it to per user? Can I buy individual terminal server liscences?
 

A:Terminal Server liscence

anyone?
 

Read other 1 answers
RELEVANCY SCORE 74.4

I am trying to get Office XP Pro to work using terminal services. The problem is when my users log in and try to access an office application they get an error:

"Only Administrators have permissions to add, remove, or configure server software during a terminal services remote session. If you want to install software on the server, contact your administrator."

I also get two errors in my event log. I have attached screen shots of the errors. The only thing I know for sure is that it is some sort of permissions issue. If I add the users in question to the local admin group on the server the errors stop.

I have been online and researched this until my eyeballs have fallen out but have had no luck. Any help would be greatly appreciated!

Thanks,
schony
 

Read other answers
RELEVANCY SCORE 74.4

I have netmeeting on the terminal server (nt4.0 SP5) connected straight to the internet. Works great if I'm at the console. If I try to connect via terminal server client or citrix client it still hosts meetings but sharing and collaboration buttons are grayed out??? Please help!!!
 

Read other answers
RELEVANCY SCORE 74.4

Can any1 maybe help me to get this right.

I work for a company that has branches all over the show and the outside branches connect to a terminal server to work on an access application. how would i be able to get them to print to their local machine, and to make it worse some of the printers are network and some are just connected to a local machine of the branch.

Ive searched all over the web but to no prevail. and its realy starting to become a bother.

PLEAS help if any1 can.

OH! and have a good 1
 

A:Printing over a terminal server.

you'll need to install all the individual print drivers:

Printers and Faxes --> File --> Server Properties --> Drivers

If you want to avoid installing a hundred print drivers, you can install something like PrimoPDF (can get it from download.com for free) on the client machine and on the terminal server. If they print to PrimoPDF when in terminal services, it will bring it up in a PDF file on their end, and they can then print to whatever printers are attached to their machine.

You will also need to follow the article at the following address to make sure your printers can map to the terminal server:
http://support.microsoft.com/kb/302361
 

Read other 2 answers
RELEVANCY SCORE 74.4

hey does anyone know where i can get a list of terminal server compatable printers just need to know what will work so can make recommendations would appreciate any suggestions
 

A:Terminal server and printers

the vendor site of the terminal server?
 

Read other 1 answers
RELEVANCY SCORE 74.4

Hi guys,

We have recently upgraded all of our clients machines from XP to Win7 pro. and left all our servers on Win2003 st. edition. While on XP, users were able to connect and print on our terminal server which is running Win2003 but we have been having problems after the clients were upgraded to win7. User's printers are not being redirected now. Im not too sure if this is windows7 with win2003 issue or just HP drivers issue because all the printers are HP. I did try and find most of the HP win7 drivers to isolate the problem and I even downloaded HP univ. drivers but still the printer were not being redirected. What could be the issue here, I'm really confused.

Please help. Thanks

A:Win 7 and Win 2003 terminal server

Hi msizim - Welcome to SF,

Do you have a Print Server Role configured in one of your Windows Server?

Read other 4 answers
RELEVANCY SCORE 74.4

I'm new to the forum and not too tech savvy, so please be patient.

OS: Windows 7 64 bit

Laptop: ASUS Notebook K60IJ Series

I work from home a lot by remoting in to my PC at work. Last week I was able to remote in just fine, but today could not using my laptop. I could remote in using my wife's laptop just fine, but could not using mine. I get the following error:

Could not connect to terminal server

I can log into the network just fine. I have a random passkey that I enter etc. But, when I put in my workstation ID and try to connect, I get the above error.

Again, I was able to log in just fine using my wife's laptop today, but not mine

I have not made any changes recently (that I know of)

Any help would be greatly appreciated. If you give me something to try, please provide step by step instructions on how to complete the steps. Thank you

Update:

This seems to be an Internet Explorer issue. I downloaded and tried to remote in using Firefox and it worked just fine. Any ideas why IE is now giving me issues? Is there a setting that changed? I was gonna try to uninstall and reinstall IE, but it does not come up in my list of programs to uninstall...

A:Cannot connect to terminal Server

Go into System Restore and restore your PC to a date before you started having trouble. If you are not familiar with the process, look at this tutorial System Restore Let us know how it goes. This will not erase any of your data.

Read other 1 answers
RELEVANCY SCORE 74.4

I'm trying to set-up s terminal server and connect via RDP. It's running on Windows Server 2003, port 3389 is listening, but when I find the server on RDP, it says, "the client could not connect to the computer. Remote connections might not be running..." All remote and terminal services are running. Please help.
 

A:HELP. RDP terminal server issues!

The client is on the same LAN?

You made sure port 3389 is open on any firewall running on the server?
 

Read other 2 answers
RELEVANCY SCORE 74.4

I have a NT 4.0 terminal server with the citrix server installed as well. The problem I am having is that when youre logged in and idle after a certain time you gett disconnected. Your processes still run on the server. When you log back in you're supposed to be right where you left off, however Word 2000 is coming back screwy where pages out of a document get scrambled. I want to bame this on word and temp files but not sure. Anyone else have any ideas? It only shows up in word so far adn only after a disconnect and reconnect.
 

Read other answers