Over 1 million tech questions and answers.

seperated harddisk

Q: seperated harddisk

ı seperated my harddisk 4 pieces. but ı dont entire the harddisk pieces with double clicking expect from including windows xp. the error name is
"resycled\boot.com is not a valid application on win32".
if you reply quickly, ı will be

Read other answers
RELEVANCY SCORE 200
Preferred Solution: seperated harddisk

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 48.4

Hello all,

I need some advice.

I recently replaced my old harddisk to a new harddisk. The old harddisk has windows xp home and other programs installed.

I did not format the old harddisk, I only took out the old harddisk and replaced it with a new harddisk. I then installed windows xp home to the new harddisk.

While I am installing programs on the new harddisk, I discovered that one of the programs do not allow me to activate the program license because I have previously activated the program on my old windows. I need to do a proper uninstallation to release the license, then I can activate the license of the program in the new harddisk.

My question is, can I take out my current new harddisk, replace it with the old harddisk, boot up as normal into the old harddisk windows, uninstall the program inside the old harddisk, then replace the old hardisk with my new harddisk again.

Will I be able to access the old windows on the old harddisk?
Will it mess up my current windows/programs settings?
Will my current new harddisk windows be able to work as normal after accessing the old harddisk windows?
I thought of accessing the old harddisk as a slave, but I do not know if it is possible to access the old harddisk and do a proper uninstall of the program?
Is there any better way of uninstalling the program on my old harddisk?

Thanks in advance.

A:Accessing Win XP on old harddisk to uninstall programs after installing new harddisk

you have to swap out the drive completely. at no time should you have both hdd plugged in.

repeat, do not run them as master and slave. run each hdd individually at each time only.........

Read other 5 answers
RELEVANCY SCORE 48.4

I have 40GB harddisk and now I am moving to 120GB SATA hardisk. But i want all the data with softwares, plugins and all the windows settings to be transferred in the 120 GB harddisk.

There is any way so that all files and setttings will transferred and I dont have to install everything again.

In my system Windows XP Pro SP1 is installed.
 

A:Transfer data/settings from small harddisk to big harddisk

Read other 6 answers
RELEVANCY SCORE 47.2

I have a wd my passport ultra and its broke down into 3 different volumes with different amount of gb i want to add all of them together so I can have just one with all the gb on it
 

Read other answers
RELEVANCY SCORE 46.8

Hi everyone... I have a new dilemma. I'm grabbed the data with this link and entering it into Excel. I did text to columns because I need to find specific cells (snowfall totals and departures). So I used a formula as arrow points to, to find these cells. I set all this up this morning..

When I just refreshed the new data this afternoon I realized it went back to one merged column.

3 questions:

1. Is there an easier way to grab that specific snow data from either the web itself and enter it into excel OR refreshed each time in excel without staying as one column?

2. Do I simply have to do text to columns each time? (twice a day and 30 different tabs!) 30 NWS Offices.

3. Why when I hit refresh all the program froze?

Thanks so much!


 

A:Refreshing Web Data Seperated in cells

Read other 9 answers
RELEVANCY SCORE 46.8

Need 2 seperate wireless routers, each with its own cable modem, to run in the same house off the same homes internet cable but in different rooms. Is this possible or would they interfer with each other? The first router is already setup and working fine. I simply want to setup my own router from a different room. My PC is running XP and the others are running XP, Windows 7 and Vista.
 

A:2 seperated wireless routers in same home?

Read other 12 answers
RELEVANCY SCORE 46.8

Not sure if anyone might know but:

I have come across 2 different software programs where the numerals in the Version number are seperated by comma's, instead of periods.

Wondered if the comma's could cause problems with functions like updates etc OR if something on my computer could have caused this to occur.

Thank you for your time,

UncleDJ
 

Read other answers
RELEVANCY SCORE 46.4

Here is my system breakdown:
- Laptop Computer with 1 Harddisk (3 Partitions: C, D, E)
- Running Windows XP SP3
- Virus/Malware Scan: Deemed CLEANby Avast

HISTORY:
- Was installed with Windows Vista on C: partition
- Was installed with OSX (via osx86) on D: partition
- E partition is a FAT32 partition to swap files from Vista to OSX

- I got sick of Vista, and bought myself an iMac so I decided to convert the whole laptop back to XP.

- I formatted D drive while in Windows Vista to FAT32 as it wouldn't let me format to NTFS. I assume it has something to do with the fact that OSX was installed on it.

- After backing-up everything, I reinstalled Windows XP (SP2) via the installation disk I got when I first bought the Laptop.

- In the setup, I deleted the C partition, and selected to install XP to the unlocated space. I selected to fully format (not Quick) the new partition in NTFS.

- After install, everything is working fine so I reinstall all my drivers/programs, and have been working on it with no problems.

- That was 4 months ago.


PROBLEMS:

- Few days ago, I remembered that my D and E partitions are both FAT32 and that they should be formatted to NTFS since I'm not installing OSX on it again.

- I move all my files in D drive out to other partitions and try to format it. And i get the error "Windows was unable to complete the format".

- I go into Disk Management and try to delete the partition but the option is greyed out. Also... Read more

A:HELP! XP installed into seperated Boot & System Partitions

Quote:





Originally Posted by Numerals


Here is my system breakdown:
- Laptop Computer with 1 Harddisk (3 Partitions: C, D, E)
- Running Windows XP SP3
- Virus/Malware Scan: Deemed CLEANby Avast

HISTORY:
- Was installed with Windows Vista on C: partition
- Was installed with OSX (via osx86) on D: partition
- E partition is a FAT32 partition to swap files from Vista to OSX

- I got sick of Vista, and bought myself an iMac so I decided to convert the whole laptop back to XP.

- I formatted D drive while in Windows Vista to FAT32 as it wouldn't let me format to NTFS. I assume it has something to do with the fact that OSX was installed on it.

- After backing-up everything, I reinstalled Windows XP (SP2) via the installation disk I got when I first bought the Laptop.

- In the setup, I deleted the C partition, and selected to install XP to the unlocated space. I selected to fully format (not Quick) the new partition in NTFS.

- After install, everything is working fine so I reinstall all my drivers/programs, and have been working on it with no problems.

- That was 4 months ago.


PROBLEMS:

- Few days ago, I remembered that my D and E partitions are both FAT32 and that they should be formatted to NTFS since I'm not installing OSX on it again.

- I move all my files in D drive out to other partitions and try to format it. And i get the error "Windows was unable to complete the format".

- I go into ... Read more

Read other 1 answers
RELEVANCY SCORE 46.4

I need to shrink one partition, partition D, and extend partition C with the newly unallocated space. I can shrink D without any problems, however, for some reason the two partitions are seperated by a small recovery drive that i can not delete. Any advice about getting the two partitions next to each other or how to extend the drive otherwise?

A:Repartioning when the drives are seperated by a recovery drive

The Microsoft rule is that a drive or partition to the right of the C: drive, or whatever drive you want to extend, must be Unallocated Space to extend that drive.
The recovery partition, to the right of the C: drive, is used to restore your computer to Factory Defaults if there is disaster.
There are 3rd party utilities like Easeus Partition Master, or Minitool Partition Wizard that may allow you to do this, but it may make the Recovery Partition unusable.
If you have Windows install media, and do not care about using the Recovery Partition, then you can right click the Recovery Partition in Disk Management and Delete Volume. Making it Unallocated Space, then you can Right click the C: drive and choose to Extend Volume into the Unallocated Space. Be sure to backup in case this goes wrong.
The other alternative is to get another HDD that is larger,(ie) 2TB drive. And Clone the old HDD to the new, replace the old with the new and be back in business with a much larger drive. You then can keep the old drive as a backup, or you can format it and use it for storage.

Read other answers
RELEVANCY SCORE 45.6

Hi,
If I drag and drop an ASP.NET calendar control onto a web form without a master page the header is on the calendar control. If I drag and drop it onto a web form with a master page the calendar header is separated from the days. I have spent a lot of time
looking on the internet for a solution and did not find one. Does anyone know how to drag and drop a calendar control onto a web form with a master page so the calendar control header does not separate from the days?
Thanks.

Read other answers
RELEVANCY SCORE 45.6

Is there a way in Access to have a report with data like BB900, 10/1/2006 behind a barcode? Then have a form with two columns. The user would scan barcode. The first column would hold the information to the left of the comma, and the second column would hold information to the right of the comma.
 

A:Access Database Text Field Seperated By A Comma

Read other 6 answers
RELEVANCY SCORE 45.2

Hello,

In VB Express, what is the easiest way to read data from a text file, when the data is seperated by either a couple spaces or commas. So far i have been using:

Using sw As StreamReader = New streamReader("C:\test.txt")
dim line as string = sr.readLine()
while not (line is nothing)
...
line = sr.readLine()
end while
End using

to read in lines from files but what do you do when you want multiple pieces of data from the same line seperated by commas or large spaces such as:

Data like this: [Name, Age, Country]
Jim, 23, Canada
Mike, 27, Canada

Or data like this: [Episode Title Air Date]
100 This is ep one Jan 1
101 episode two Jan2
102 the third episode Jan5

Thanks in advance.
 

A:Solved: VB express: items in a file seperated by large spaces

it would be awesome if it was a way without having to use indexOfs and substrings. I am doing that currently and it takes way too long.
 

Read other 3 answers
RELEVANCY SCORE 40.8

Hey guys,

I have another ravishing question for you. I have many (and I mean many) files where the words within the filename are separated not by spaces but rather by periods.

Example:
My.Summer.Vacation.mkv

This is because my family uploads movies and other content on sites like Rapidshare and Hotfile, in which the filename cannot contain spaces. Therefore people use periods to separate the words of a given file.

My question is the following, is there a way to index my hard drives using either Windows 7 search or even Google Desktop in order to return a search result for the word "vacation" in my above example. At the moment it does not return a result since the word vacation is not separated by spaces.

As per my usual etiquette, if anyone helps me figure this out, I will post images of how to do so in the replies section of this posts.

Thanks for any input,
Missionman

A:How to index/find files seperated by a period "."

Everything Search picks it right up:

Everything Search Engine

Read other 8 answers
RELEVANCY SCORE 34

I have an 80GB IDE Hitachi HD which was formatted NTFS on my computer running Win 7 Ultimate. My problem is that when connected to my computer via external Sharkoon Drive link USB adapter, it is not shown in Windows Explorer but is shown in Device Manager as USB Device and in Computer Management it is shown as ?Disk 1 ? Not initialized? and when clicking on to initialize, an error shows as ?This device not ready?. Same occurred on another PC running Vista Ultimate. Strangely, when connected to IDE inside PC it works perfectly. Can anyone help please?

ASUS P5GC-MX/1333 MB
500GB sata Hitachi HDD
2GB Ram
3.2GB CPU
Windows 7 Ultimate

A:USB Harddisk

Does the USB adaptor work correctly with any other drive?

Read other 4 answers
RELEVANCY SCORE 34

My computer came with a 10gig hardrive with Windows Me preinstalled. I upgraded to Windows XP Home Edition and have been very impressed it was well worth the 90 I payed for the upgrade pack! I purchased 64MB of RAM to bring my memory from 64MB to 128MB and my computer hasn't crashed ONCE since I got XP! But having two operating systems on one 10 gig hardrive and lots of preinstalled programs such as office has taken its toll and I was warned the other day that my harddisk was nearly full! I deleted all my unnessesary files and managed to get back 1 gig of space but I'm still not happy and would like to get a new 20gig hardrive. It makes more sense to use my recovery disk to return my computer to the way it was when it left the factory and reinstall windows XP on the new harddrive leaving my old operating system on the old C:\ and installing all my programs into the new harddrive. I have two questions about this:

1) Will my computer become dual-boot which i DONT want to happen I want the same setup as I have know but with XP installed on the new harddrive?

2) Will I be able to call my new harddrive B:\ as I don't have a 5 1/2 floppy drive installed and would prefer to have things organised and call it that, if not what will my drive call itself as default as I already have A,C,D,Q,R drive letters already taken?
 

A:Harddisk!

Read other 12 answers
RELEVANCY SCORE 34

Hello,
a week ago i transferred a list of archived files to my mp4, then the light went off ,when it came back, i can't find the archives on the partition , nor the mp4

also some sound files disappered from the mp4, also files are occupying space whether on the hard disk or the mp4

i tried to show hidden files, but i still can't find the files

so what's wrong ?? , how can i get the files again ??? because the computer shows that they are still occupying space

thanks in advance

Best regards,

A:HardDisk & MP4

  
Quote: Originally Posted by Mitooo


Hello,
a week ago i transferred a list of archived files to my mp4, then the light went off


Hi.

Does that mean you lost power to your computer or drive?







  
Quote: Originally Posted by Mitooo


because the computer shows that they are still occupying space


If you lost power whilst transferring, there is a good chance some of the files will have become corrupt.

Read other 5 answers
RELEVANCY SCORE 34

hi

i have a western digital 160gb caviar blue hd now i want to buy a new one but some questions are bothering me

first is seagate any better than western digital i ask this because 1tb seagate is just slightly expensive than 500gb western digital so should i go for seagate?

second is that if i buy seagate, will it cause any problem to the system having one wd hd and one seagate?

please answer in details would love to hear anything to increase the knowledge

A:help about a new harddisk?

1. you can mix any makes of disks. They are all 'compatibel'.

2. the make does not matter. They are all the same since they all come from the same factories in Thailand. I have a dozen different makes and do not notice any difference.

3. except Seagate - one of those just died on me. The first and only disk that died in my installations.

Read other 6 answers
RELEVANCY SCORE 34

Hello,

Re: Win98SE - Intel 465 Mhz

The harddisk in my PC is 8 GB of which only 2,56 GB is still available now.
From I similar PC (done away in the meantime) I still have a 8 GB IDE harddisk.
and want to place it in my PC.
Please mind that I have never opened a PC sofar.

a) I don't know to what electronic circuit-cable it must be connected (wondering about serial and parallel)

b) then this second harddisk must somehow be connected to and made visisable to the system (by cables I think; however what cables, new ones or
already present)

When I tried to google this subject I only found items on partitioning etc, not
about how to get and connect a second harddisk inside a PC.
Furthermore I have no idea whether there are special well-known problems
related to having a seond harddisk installed (e.g. very slow system)

Advises will be highly aprreciated.

Best regards,
a.ruiter
 

A:add a second harddisk

This may help http://www.perfectdrivers.com/howto/seconddrive.html
 

Read other 3 answers
RELEVANCY SCORE 34

My computer came with a 10gig hardrive with Windows Me preinstalled. I upgraded to Windows XP Home Edition and have been very impressed it was well worth the 90 I payed for the upgrade pack! I purchased 64MB of RAM to bring my memory from 64MB to 128MB and my computer hasn't crashed ONCE since I got XP! But having two operating systems on one 10 gig hardrive and lots of preinstalled programs such as office has taken its toll and I was warned the other day that my harddisk was nearly full! I deleted all my unnessesary files and managed to get back 1 gig of space but I'm still not happy and would like to get a new 20gig hardrive. It makes more sense to use my recovery disk to return my computer to the way it was when it left the factory and reinstall windows XP on the new harddrive leaving my old operating system on the old C:\ and installing all my programs into the new harddrive. I have two questions about this:

1) Will my computer become dual-boot which i DONT want to happen I want the same setup as I have know but with XP installed on the new harddrive?

2) Will I be able to call my new harddrive B:\ as I don't have a 5 1/2 floppy drive installed and would prefer to have things organised and call it that, if not what will my drive call itself as default as I already have A,C,D,Q,R drive letters already taken?
 

Read other answers
RELEVANCY SCORE 34

I have an ultraDMA harddisk from compaq. I hope to know what is the ATA and RPM value of my 20GB drive. Is there some software that I can use to check it?
 

A:Harddisk

The only 20 GB HDD I could find on the Compaq site is 20GB Ultra ATA 100 Hard Drive (7200rpm)
251974-B21

This was at http://www.compaq.com/products/desktops/options/options_storage1.html
That doesn't mean that there aren't more. The way to know, for certai8n, is to open your system up, and get the part number, or full specs from off the HDD case itself.
 

Read other 2 answers
RELEVANCY SCORE 34

Hi!Where can i buy sata cabel to my ideapad y700 because i have ssd but i cant connect hdd harddisk because i dont know where to buy the cabel. I only have ssd m.2 .  Please help me !

Read other answers
RELEVANCY SCORE 34

I am trying to setup the 3rd Hard Disk in my CPU. It doesn't seems to able detect my already formated hard disk. Is it possible to have 3 Hard Disk in 1 CPU? If so, how do should I go about it? Do I need to do anything with the Jumper on the Hard Disk?
 

A:3 HardDisk in 1 CPU

Read other 7 answers
RELEVANCY SCORE 34

Hi which would be the best free hardrive checking tool that would tell me if something is failing or is dead

A:harddisk

http://www.seagate.com/support/downloads/item/seatools-win-master/
http://www.seagate.com/support/downloads/item/seatools-dos-master/

Read other 7 answers
RELEVANCY SCORE 34

i have an old hdisk on an old pc.
the disk label shows that is 4+ Gigs
when i try to fdisk and format, only half is available
at fdisk options appears to be only 2+Gigs
wtf?
 

A:only 1/2 of harddisk is there!

Read other 6 answers
RELEVANCY SCORE 34

Hey can anybody tell me which is the best harddisk drive for which i should go??????????I need atleast 250 gb or more of diskspace so suggest me the best HDD with their latest price ????????Thankyou.
 

A:Best HARDDISK

Get Seagate 500GB SATA-II

125bucks.
 

Read other 23 answers
RELEVANCY SCORE 33.6

Getting Error. 2215-EIT Failure. VA boot record read failure.Ensure drive with VA image is installed correctly. how to solve the issue and its urgent Regards, Yogesh Parate - IT Engineer.

Read other answers
RELEVANCY SCORE 33.6

Is it possible that a hard disk can be damaged by virus?A computer of a friend of mine has been complaining about her sluggish PC even if had been formatted.The technician said the harddisk was virus infected?The hard disk should be replaced?what do I need to check out first to know the cause of sluggishness?Thanks.

A:Harddisk Is Infected!?

Since the virus is stored at the hard disk when placed,yes
examples are:
-It deletes files needed to run a system
-Tracks down your activity and private information
-It also slows down pcs
and many more......

Did she download any AntiVirus program?
several of these at the same time may be the cause of the sluggishness
especially when they are scanning at the same time

Also,did she got recently infected with a particular virus?
After reformatt of her PC?

Read other 10 answers
RELEVANCY SCORE 33.6

Hi guys, I want to add a second harddrive to my new Elitebook 840 G4 but I'm missing the correct caddy. There is no caddy built in! Where I can find the correct caddy for the harddrive? best regards,Jet Ren Gen

Read other answers
RELEVANCY SCORE 33.6

Guys, today I install the 200 GB Serial ATA drive in my system, But after formatting it shows total 189 GB, where 11 GB gone. Anyone can tell me, I am also attaching the partition magic screenshot.
 

A:Where the space gone from harddisk

Read other 7 answers
RELEVANCY SCORE 33.6

Anyone knows how to make the usb harddisk bootable?

As for the bios side, I already set first boot device to usb-hd.

Thanks.
 

A:Booting from usb harddisk.

Although some manufactureres claim USB "bootablity" right ut the box that not usually the case. I searched for answers to your question and it might involve a little more from your side.

For starters make sure you have the latest version of your BIOS.

You might want to then format and partition the drive and make it a bootable drive in that sense. Either through DOS or Windows.

Also, you might want to copy the same bootable files located in a floppy boot disk (make sure the boot files are the same as the OS your using) to your USB hard drive.

If you still need more "oomph" to this answer check out this site. https://www.codidirect.com/shop/thefactsbehindbootability.htm . Keep in mind that although they are mentioning USB Flash devices, the same technically applies to a USB HDD since it is also classified as a "storage device".

Hope this helps!!
 

Read other 3 answers
RELEVANCY SCORE 33.6

my laptop is working fine.But i heard only a sparking type of sound.when i contact the technical person he says that it is a hard disk sound ,and it is normal.so my question is ,is it correct that some noise will be there in laptop hdd.

A:harddisk sound

Dear Customer, Without hearing the sound it is hard to judge but it does not sound like a hard drive from your description. Hard drive noise is usually a rhythmic "click" not a sustained "whirr". That kind of noise comes from a cooling fan. We can test the hard drive in the BIOS. Here is a link to  test the harddrive  HP Notebook PCs - Testing for Hardware Failures (Windows 10, 8)  If  issue remains. and if this is a recent purchase, please contact HP Support again for further assistance. Contact HP Support.You can also Check your warranty Here to verify the warranty status  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

Read other 1 answers
RELEVANCY SCORE 33.6

my harddisk size is 20 GB.i m using only 3 GB of it.BUt it still shows 16.65 GB used whereas I m using only 3 GB. I checked all the contents of my hard drive.It is only 3 GB. I restarted my computer also but still it doesnt show any change.Cleared all the history and deleted all the temporary files but still cudnt get out of this.
 

A:Showing more used harddisk than actually used

Read other 9 answers
RELEVANCY SCORE 33.6

Hi all,

I have some harddisk space problems, where i need your help.

I have allocated 100GB for my system drives, and 50GB is the actual space used for the system, while the balance is free space. This morning, i notice that about 32GB has been "used", and the balance free space shown is 18GB. I have look through all the folder, in cluding hidden file in the system drive...but...is fantastic, i sum up with total 50GB.

Where my 32GB gone????

Thank you,

Best regards,

Puah

A:Harddisk Space

that happen to me too harddisk space gone so fast.

i think it is because of a harddisk virus that eat your harddisk space .

so maybe do a defrag and scan your computer for virus and spyware.

Read other 7 answers
RELEVANCY SCORE 33.6

Sir, i've 80 gb harddisk, but unfortunately while i'm formatting it, it shows me only 37.7 gb instead of 80 gb. So, sir please help me urgently to solve this problem.
 

A:problem in harddisk

First, please confirm that the hard disk contains only one partition and that it uses all the space on the hard drive. If that is the case then I would guess that chkdsk has over the years identified (and marked unusable) about half the sectors on the disk. That is unlikely; more likely you are talking about a partition that is only about half the hard disk.
 

Read other 1 answers
RELEVANCY SCORE 33.6

hi
At present I am using a hitachi 80 GB SATA hard disk.It is so insufficient so I am planning to buy Samsung 500GB SATA.Now if I add the new HD what would happen to the previous one?(80 GB hitachi).Will it remain or replaced by the new one?Let it is possible to add the new one with old one(80+500=580) then reinstalling the operating system(xp sp3) is reqired?
 

A:New harddisk question

Read other 12 answers
RELEVANCY SCORE 33.6

Hey,
Does anyone known where I can find an up-to-date database of all existing harddisks sorted by manufacturer or type.
Thanks
Frank
 

Read other answers
RELEVANCY SCORE 33.6

Hello! can anyone help me to solve this problem please?
i want to resize drive C: because it too small. is there any software to deal with this problem? right now i'm using window 7 with system type: 64 bit.

A:need help for resizing harddisk

Paragon Partition Manager v10 works well with Windows 7 x64

Read other 3 answers
RELEVANCY SCORE 33.6

Hello everyone! Just got a little question.

I'm trying to upgrade my harddrive I currently have 4G and i just purchased a new 15G HD. I used the program HDCOPY to migrate my data and OS to the new HD. Then i noticed that my new HD also copied the size of the old one and i believe that i formatted it first and i believe it was 15GB before i copied the old HD.

What do i need to do? Do i have to use another program? Do you know any? or there's just one thing that I need to do to get my original size back?

Thanks
 

A:Copy Harddisk

Hi NavigatorX
I have never used hd copy but from this site it looks like there are two different modes of copying. One uses a sector by sector exact disk image (which is what you have done.) The other mode does a logical file copy and leaves the partition table alone. I think this is their

site.http://212.223.28.218/default.htm

I use a program called file copy which I run from windows. I think it came from ontract with an IBM drive. You may also want to consider using a program like partition magic. This will get your partition restored back to it's original size and keep the data as is.
 

Read other 1 answers
RELEVANCY SCORE 33.6

Hi,
 
i have a Problem with a System that i don't know how to fix. Every time I start a programm the Harddisk runs with 100%. CPU and Ram are normaly.
The space is half fulled (500GB). It's an Acer Notebook with Windows 8.1 and now it is upgradet to Windows 10. I call Acer and they told me that the
Problem is a Microsoft Update that possibly comes in when Windows 8.1 was aktiv.
Does anyone know thomething about this update?
 
Thanks for help,
 
Aitora
 

A:Harddisk runs by 100%

Please download and install Speccy to provide us with information about your computer.  Clicking on this link will automatically initiate the download. 
 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.
 
 

Please download MiniToolBox to your desktop.
 
Right-click on MiniToolBox.exe and select Run as Administrator.
 
You will see an image like the one below.
 

 
Click on the following checkboxes only:
 
• List last 10 Event Viewer log
• List Installed Programs
• List Users, Partitions and Memory size.
• List Minidump Files
 
Click on Go to start the scan.  Once it is finished highlight the text, then copy it and paste it in your topic.

Read other 1 answers
RELEVANCY SCORE 33.6

Hi,
 
Toshiba L750, core i5 - win-7 64bit installed. 4gb ram, 600gb HDD,
50gb os, 250gb, 250gb partitions. 8gb Virtual memory on 3rd partition.
 
Used sparingly and working fine until a few days ago. I heard some faint whirling sound (probably the HDD) and in some time the OS crashed.
It went into an infinite loop of shutting down and rebooting trying to recover the system.
 
At some time, I chose command prompt and ran chkdsk on all the partitions chkdsk /f /r
 
It seemed to work, although the computer was only half as fast.
 
After a couple of boots, I only get a blank screen and a cursor at left hand top, post the bios screen.
 
Has my harddisk crashed? If so, how do I get it working back, either with the same HDD or another one
The data is not really important to me ( I have a back up on my desktop)
 
Thanks in advance for your help

A:Has my harddisk crashed ?

Yes it sounds like it.  Here is a video showing you how to replace it.

https://www.youtube.com/watch?v=svTUrXrAa1U

Read other 15 answers
RELEVANCY SCORE 33.6

Hallo,
 
my laptop, Compaq presario, crashed 2 days ago.
 
I took of the harddisk and i put another one.
 
I installed the windows home premium again , everything is working perfectly, only the sound.
 
The icon is there down in the toolbare and when i play music or something with sound, i see that there is  little bit of movement , but i hear nothing.
 
No sound comes out, i tried almost everything and still nothing.
 
who can help me please?? you are my last resource.
 
Regards
tanya

A:harddisk crashed

When you say 'everything' what did you try?
Did you try updating the drivers?
Did you make sure the volume is full from the speaker icon in the taskbar?
Did you make sure no sounds are muted when you click on mixer?
Are you using external speakers/headphones?

Read other 17 answers
RELEVANCY SCORE 33.6

Hello Support, i wanted to know how i could replace the harddisk in my laptop. but i cant find the manual. Help is appreciated thanksPeter

A:Replace harddisk

As we have properly understood your issue you want to replace your hard disk in  your laptop for this please follow these steps: Turn the computer off and remove the back panel. Look for any screws securing your drive to the laptop. Lift the old drive up about 30 or 45 degrees and pull it out.In its place, install the SSD and put the back panel on.Nitin singh guleria

Read other 2 answers
RELEVANCY SCORE 33.6

Hey there

I'm having a weird issue with booting up my computer and I'm hoping to find a solution that does not involve reinstalling windows completely. Might come to that, but first I'm looking for other issues.

To give some context:
A few months ago my primary harddisk started failing. I acquired a new harddisk, installed windows on it and it has been working fine.

When I boot up the computer, I can select between the old and the new windows installation and I've simply been using the new one. I've left the old harddisk plugged in as I had some data on it I wanted to salavage and then I just left it there. I've gotten the data of it and have had no reason to unplug it.

Recently, however, I wanted to unplug the old harddisk as there has been some issues with hangups and I had a suspicioun they were caused by windows (for some reason) reading from the old harddisk.

When I unplugged it I got a "Bootmgr is missing" error and could not boot up. Thus I need to have the old harddisk plugged in in order to boot up windows.

WHich is annoying, as I think the old harddisk is the cause of the performance issues I've been having.

Obviously the new harddisk has not been made bootable by installing windows on it. The old harddisk was plugged in when I installed windows, so that's likely the cause of it (for some reason...?).

Is there any way for me to fix this without unplugging the old harddisk and installing windows again? I'd rather ... Read more

A:Cannot Boot from Harddisk

The Windows installer will put its boot-up code (the bootmgr) on the primary hard drive regardless of the drive that Windows proper is installed on. You can repair this by booting your Windows 7 DVD and running the Startup Repair tool. See Microsoft's how-to article here. Make sure that the original disk is unplugged before attempting this repair.

Read other 7 answers
RELEVANCY SCORE 33.6

Hello, My laptop's hard disk and I dont even have a recovery disk.I was wondering how can I activate the windows if I do a clean install using a Win 8 image?There no key label on the back of the laptop either.PLease help guys. Thanks.

Read other answers
RELEVANCY SCORE 33.6

I was thinking about partitioning the hard drive on one of my computers running XP SP3 and installing other Operating systems on them, but I have no clue how to do it Also, I know there's a way to do it with an OS disk, but I have a SP2 one, would using that make a difference partitioning the harddisk?

A:Partitioning a harddisk

I would recommend wiping the entire disk, and starting from scratch using the Windows installer to partition your drive out. What size of drive is it, and what OS do you plan on installing on the other partition?

Read other 4 answers
RELEVANCY SCORE 33.6

Hi,

I have hitachi 320 Gb Hardisk and it got bad sectors i tried windows chkdsk but its not worked so i am trying to do low level or zero level format .
So i have certain queries please help it to solve them
1.I laptop cd drive is not working so can i use it through usb & how.
2.Does it really solves my bad sectors problem..I have heard that if it stuck in between hadrdisk become useless is it right..???
3.Currently its showing 397 bad sectors on disk surface according to software Hard Disk Sentinel

Operating System Win 7

A:Bad Sectors on Harddisk

Currently its showing 397 bad sectors on disk surface according to software Hard Disk SentinelHi -This program is not one that I am familiar with, but it sounds like many Registry Fixers that show 200 problems, and say" for $50 we can fix these" I would be very careful about believing all that this program is telling you about your system !!The Hungarian or German company behind this program seems to offer very little support to their program, and also seem to want your money -Run chkdsk /r first and see if the report is the same as this HDS program reports to you, as your inbuilt diagnostics are usually better than some 3rd party programs -Method 1: Run As Administrator from shortcutUse this method and type chkdsk /r at the command -Thank You -

Read other 6 answers