Over 1 million tech questions and answers.

HP Omni 27-1002er

Q: HP Omni 27-1002er

Hello world!The problem is I have the HP Omni 27-1002er and have no idea how to add a second monitor to it.Where can I find video out port?Thank you!

RELEVANCY SCORE 200
Preferred Solution: HP Omni 27-1002er

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: HP Omni 27-1002er

Hi, It does not have out port for an external monitor: http://support.hp.com/in-en/product/hp-omni-27-1000-desktop-pc-series/5186974/document/c03262527/ If you wish, please use USB to HDMI or USB to DVI adapter such as: http://www.officeworks.com.au/shop/officeworks/p/comsol-usb-to-dvi-hdmi-vga-adaptor-cou2dhvad Regards.

Read other 1 answers
RELEVANCY SCORE 40

I have a all in one HP OMNI 200 pc. The computer came with windows 7 but was upgraded to windows 10 about 6 months ago.   Was trying to do a recovery/reset and it froze up with the following message:RecoveryYour PC /device needs to be repaired.  The operating system couldn't be loaded because the kernal is missing or contains errors.File:/windows/system32/ntoskrnl.exeerror code 0xc0000221

Read other answers
RELEVANCY SCORE 40

Not sure if this is the correct catogory to post my question in, but here goes. I have a HP Omni 100, about 6 yrs old. About a month ago, I went to the restore function & my computer crashed. Now, all I keep getting on my screen, after the initial start up is select keyboard function, or something of that nature. I hope I have not lost everything I have in that computer, since I have pics I cannot replace. Two or three months ago, it started to act funny. The page I was on would turn into a smaller square in the middle of the screen, and that square would be full of multi colored lines.(Like snow on a tv screen) Now I cannot get it to do anything but show the keyboard page????? Please advise as to what I could or should do. THANK YOU Roger
 

Read other answers
RELEVANCY SCORE 40

Hi,My pc monitor suddenly just stop working. But there isnt any port available to connect to another monitor. All my work is this pc and i need to extract them, is there anyways to do it? Also is it advisable to get it repair?

Read other answers
RELEVANCY SCORE 39.6

Can I add an SSD drive to an Omni 27 (1200ev)  or do I have to replace the original drive? Ideally I'd like to retain the 2TB hard drive and have at least the OS on the SSD. Kind Regards, Brad

A:Can I add an SSD drive to an Omni 27?

Brad, Here are the specs for your HP Omni 27-1200ev Desktop Computer and its IPISB-NK (Lavaca3-SB) motherboard. Based on the specs, this model only supports two SATA drives. One SATA data cable for the hard drive and one SATA data cable for the optical drive. Please send KUDOs

Read other 8 answers
RELEVANCY SCORE 39.6

I just recently started having this problem, I would go away from the comp leaving it on sleep for about an hour come back and it would not let me open any programs, security options and even after several restore's and virus checks it still is giving me the problem, sometime it fixed itself but this time it has not. Any solution to do it other than a full wipe, The programs work in safe mode but other than that no other mode works
 

A:Problems with my Hp omni all in one pc

You can try a System Restore. If you aren't familiar with that process, you need to indicate which version of Windows you are using (XP, Vista, Windows 7) so we can direct you.
 

Read other 3 answers
RELEVANCY SCORE 39.6

I'd like to upgrade the RAM in my all in one and I'm finding conflicting answers on whether this can be done.  I currently have  8GB (2x 4GB DDR3 1333 SODIMM- 10600)I've got Windows 7 Home Premium 64 bit as my OS.Most of the specs for my computer list 8GB as the maximum amount of RAM possible, but another source on the HP website advises that it depends on the OS, and that with Windows 7 premium 64 bit, 16GB is the max.I don't want to purchase memory that won't work.  Can someone confirm which is the correct maximum amount of RAM for this model? Thank you!

Read other answers
RELEVANCY SCORE 39.6

I have some issues when I OCR with this software, specifically with PDFs, I get black outed boxes on the images, Any ideas? I can post examples if needed,
 

Read other answers
RELEVANCY SCORE 39.6

I have an All in one desktop Omni 27 1001ed. Now I want to use my external HD 3TB but it only reconize 2TB. Can someone explain what to do to get the other 1TB also. I have already changed the disk to GPT and formatted it again. Still no result. 

Read other answers
RELEVANCY SCORE 39.6

Omni 100 all in one pc will not boot/power up.When I push the power button, I can hear the fan engage and spin but nothing comes up on the screen. The first time I tried to turn the computer on this morning,the little blue light on the lower right corner DID light up but nothng else happened. After watching/waiting for 10 minutes, i held my finger on the power button to turn the machine off, waited a few minutes, hit the button again. The second time, the fan started going but the blue light did NOT come on this time. I waited 5 minutes and nothing happened. This time, I just pulled the plugg out of the wall and waited 10 minutes, plugged it back in, hit the button, same thing,,,fan engaged, no blue light,,,fan just spinning/whirring but nothing comes up on the screen. I have another one of these computers and i switched power supplies and the power supply is fine.

Read other answers
RELEVANCY SCORE 39.2

Posted in the notebook section as this all in one uses mainly notebook parts. I am looking for the part number / availability of the option video card upgrade. I will also the proper hp heatsink. Other than knowing this a MXM type, I have been unable to find part numbers. Wish I had the option at time of purchase, but FRY's did not stock the unit with upgrades. Thanks

Read other answers
RELEVANCY SCORE 39.2

I finally got my printer to work with windows 7 but it won't print shipping labels with stamps.com, ebay & paypal. They all say they are unable to communicate with the printer. I get a message to enable bi-directional communication with the printer and I can't figure out how to do that. I would appreciate some help. Thanks.
 

A:Solved: omni directional

You've marked this thread solved.
If this was intentional and is correct, could you please post the solution that you found so that others can benefit.
If not, I suggest that you click "Mark Unsolved" at the top of this thread. That makes other helpers more likely to step in with suggestions. Hopefully you'd be in a position shortly thereafter to click "Mark Solved" for real.
 

Read other 1 answers
RELEVANCY SCORE 39.2

I am not sure if I should ask here or in the laptop section since it is classified as a desktop, but the innards are more along the lines of laptop components. I have an Omni 100-5155 and looking for any upgrade options I may have (I do realize those options are extremely limited). I've already maxed the RAM to 8Gb, but am looking for CPU, hard drive and wireless possibilities. So my questions -What is the max capacity hard drive the motherboard will accept? I am hoping to also replace the optical drive with a hard drive caddy. Are SSD's and/or SSD/HDD hybrids supported? Can the PCI Express x1 802.11 b/g/n card be replaced by this? (to match my router's ability)Intel 3160 Dual Band Wireless AC + Bluetooth Mini PCIe card Supports 2.4 and 5.8Ghz B/G/N/AC BandsOr would I be better off getting a wireless USB dongle (if that would even work)? Any CPU suggestions or same form factor motherboard upgrade replacement possibility? I know my USB 3, better graphics and Gb WLAN dreams will have to wait until I've finished saving for a moderate gaming rig build, but I thought since I'm likely to be upgrading to Win 10 soon I should try to get the most I can out of this system... which will be eventually handed down to the nephews, hopefully within the year.  Any and all helpful suggestions will be appreciated. Thanks. For easier reference -Omni 100-5155 specsMotherboard specs   

Read other answers
RELEVANCY SCORE 39.2

Hi all!I have an all in one Hp Omni 27-1001es and i have a really big problem!!! Yesterday i was working on pc and needed to leave it for some minute.When i got back the screen was blank and the pc looked freezed; i tried to reboot and nothing changed!!!!At start up the power button led works, the fan starts to work and the led of hard drive too but the screen continues without signal of life. Unplugged everything, opened the case to clean from dust, checked the Ram and nothing appears to be burned or disconnected. Thanx for any helpLeo











Solved!
View Solution.

A:All in one Hp Omni 27 blank screen

Hello Leo3680,

 

 I understand your computer powers on but doesn?t show a display on the monitor, is that correct? I will be happy to help you.

 

If you haven?t tried already start with a hard reset.

 

1.       Remove all  cables from the computer including the power cord

2.       Press and hold the power button for 30 seconds

3.       Once done only insert the mouse, keyboard, and power cable

4.       Try and turn the computer on to see what happens.

 

 

Please respond back at your earliest convenience.

Thanks

Read other 7 answers
RELEVANCY SCORE 39.2

I was reading these posts on the Hp all in one.  The same thing has happen to mine. Just get a Blank screen.  Did this end up being the Mother Board???  Mine is only 3 years old. Any information on how to preceed would be wonderful Thanks 

A:Re: All in one Hp Omni 27 blank screen

Hi @esleman,Thanks for becoming a member of the HP Support Forums. I understand you are having an issue with blank screen. I will be glad to help you.Please post the full product number and operating system in use on your computer. See the following, if you need help with that information.How Do I Find My Model Number or Product Number?Is the Windows Version on My Computer 32-bit or 64-bit?Please get back to me with above information, so I can help you better.

Read other 1 answers
RELEVANCY SCORE 39.2

Hi guys,

Please anyone has info on the linksys omni-directional antenna HGA9N? To what devices can it be connected? Its outdoor range/bitrate? Is it reliable? Can it support large number of users/traffic? If anyone has configured or installed one before please i would welcome his comments on the product. Info on other types of omni-directional antennas would be really helpful.

Thanks
 

A:omni-directional antenna

Any antenna will have the full bandwidth of the wireless connection, it's only purpose is to more efficiently use the power available, as well as provide more signal strength for incoming signals. It can be connected to any router or wireless card that has a reverse SMA connector, which is the standard for removable antennas. A hi-gain antenna should be very reliable, since there are no active components. As long as you don't abuse the cable, it'll probably work forever.
 

Read other 1 answers
RELEVANCY SCORE 39.2

Hello Friends....!!! Just want to share the feedback , experience of TAB OMNI10 from HP. It is third class product with major issues in touch and Motherbaord, infact i approach them to provide me extended warranty then there team denied for the same as they know there product is very poor in performance. So Pls dont go with this product . 

Read other answers
RELEVANCY SCORE 39.2

I was in the middle of playing a game (agar.io) when my pc started flashing colors. First, a [red,green,blue,and white] screen, then alternating black and white. Then a combination of half black and half white, until it settles to an all black screen. After going all black, if I press a key on my keyboard it repeats everything. It does not allow me to go into safe or do anything at all. I can faintly see my homepage in the background. Even when I unplugged it and turned it on again, it's the same.

Read other answers
RELEVANCY SCORE 39.2

Posted in the notebook section as this all in one uses mainly notebook parts. I am looking for the part number / availability of the option video card upgrade. I will also the proper hp heatsink. Other than knowing this a MXM type, I have been unable to find part numbers. Wish I had the option at time of purchase, but FRY's did not stock the unit with upgrades. Thanks

Read other answers
RELEVANCY SCORE 39.2

This is to inform you that i have purchased HP Omni 10 last year and unable to use it for a single day with satisfaction. Touch and motherboard has been changed during warranty period but still the issue comes with new touch.   This product is like a garbage for me and i will not recomend this product to anybody. I want complete replacement of my product or return my money. Otherwise i will esclate this to the consumer court. Thanks Gurpreet Singh

Read other answers
RELEVANCY SCORE 39.2

I currently own an All-In-One HP Omni 27 PC. For about 6 months now, the monitor has gone dark. The light at the top turns on and the fans will run, but the monitor will not come on or show the HP loading screen. I have tried the BIOS fix, but once completed, my computer does not reset like the instructions say it should. Has anyone else had this problem or know of a solution?Thanks,Noah

Read other answers
RELEVANCY SCORE 39.2

hey guys i have had a hp omni 100 all in one pc and it was working fine its 6GB RAM IS only thing ive customized on it since i bought it. and it randomly stopped loading or doing anything past the POST screen it will literally do nothing I have tried reinstalling the ram multiple times I tried using the CMOS jumper but it hasn't done anything please help
 

A:HP Omni 100 All In One Freezes At Boot

Have you tried swapping the CMOS battery in case it needs replacing?
 

Read other 1 answers
RELEVANCY SCORE 39.2

Hi Folks,

i am using omnipage 16 version for OCR purpose,i want to run the .exe in my application but the condition is it should run in the background meaning (NO GUI)..if i give parameters to it should take and processes it and giveback the output..the whole thing should be done in the background because the client shouldnot know about this Omnipage.

this is my urgent requirement.
 

A:Solved: Omni Page

I am not sure omnipage was intended for this purpose. I.e. the developers of omnipage want people to know that they are using their programme.
 

Read other 1 answers
RELEVANCY SCORE 39.2

I recently replaced my desktop with a new HP desktop. I installed my scanner software (not new). I am now getting a message to register my scanner software at every startup. I find no way to disable this popup from the window that comes up, I cannot register through OMNI because it is likely no longer supported. Is there anything I can do from my desktop, short of uninstalling software, to eliminate this popup on startup?

thanks
marcelo
 

Read other answers
RELEVANCY SCORE 39.2

Hi Folks,

i am using omnipage 16 version for OCR purpose,i want to run the .exe in my application but the condition is it should run in the background meaning (NO GUI)..if i give parameters to it should take and processes it and giveback the output..the whole thing should be done in the background because the client shouldnot know about this Omnipage.

this is my urgent requirement.
 

A:Omni Page .exe should run internally

This is a duplicate post!
 

Read other 1 answers
RELEVANCY SCORE 39.2

I need to add more memory to my Omni. It can hold up to 8GB. It currently has 4. The installed momory is an 4.0GB Samsung PC3-10600 DDR3 1333MHz SO-DIMM 200 Pin SO-DIMMI can only find this in a 204 pin.I tried going through Crucial and bought the memory they recomended but when I install it, it crashes the system. Remove it and all is well. I really want to get aother Samsung memory so I have EXACTLY what is already in it but can only find a 204 Pin.  this image is what is currently in my computer. Any help will be appreciated.  

Read other answers
RELEVANCY SCORE 39.2

hey all. I was wondering if anyone could suggest to me a freeware wireframe and navigation design app.
similiar to omni graffle for the Mac and Microsoft visio for the PC.
I don't need anything that's fancy as long as it makes my job easy and cuts to the chase in my layout and planning for a couple of websites that I will be doing.
 

A:freeware like omni graffle

You could use Open Office Draw or DIA.
http://www.openoffice.org/product/draw.html
http://live.gnome.org/Dia
 

Read other 2 answers
RELEVANCY SCORE 39.2

I got a HP Omni 27-1210xt into my shop last week and it had a bad hard drive, so i replaced the drive with the exact model and blew out the dust while i had it apart and after i put it all back together the video never displays, it did once but the unit shut off like 10 seconds after it came up, the other times you can hear the fans and the system running but just never shows a video, I have removed the memory and turned it on and it beeps so i would only say it rules out the motherboard or processor, so I'm looking for it to be video. Now I have located the processor but I do not see where the video is on this unit, doesn't appear to tbe onboard, maybe under some of the other covers? I'm about to strip it down some more. Any trouble shooting tips or ideas guys?

A:HP Omni 27-1210xt No Video

Still no comments or tips, anyone able to assist with this problem?Thanks

Read other 1 answers
RELEVANCY SCORE 39.2

Got and hp 120 omni all in one that came in a pallet of mixed ALL IN ONE DESKTOPS this one in particular has a POWER ON PASSWORD i figured out how to bypass some of these passwords by getting an error code. the problem is that this one does not give me an error code but a (*) character any help sugestions? i already tried removing the jumpers and putting them back in place with no success. ANY HELP WILL BE REALLY APPRECIATED  











Solved!
View Solution.

A:hp 120 omni ALL IN ONE power on passworde

Hello, For you to be able to remove the Power On password, you need to remove the rear cover, then remove the metal cover that protects the motherboard and remove the jumper located close to the memory modules. Then try to power on the system and see if that resolved your problem. Thanks,

Read other 10 answers
RELEVANCY SCORE 39.2

Hello:
Please I really need your help. I don't know what happened with my desktop HP Omni 100Pc. I can turn it on but when it is about using it it completely crash and freezes.
It has windows 7 home basic 64 bits sp1 . It is an old computer but it was working great.

I'm unable to restore it to previous point because all my restore points where deleting. I was scanning my computer yesterday with norton antivirus and my hp turned off by itself.
If want to check my documents or even open a photograph, my computer crashes.
I used to use auslogic software but as it expired I opted to delete it.
Sometimes when I wanted to download something and the norton block I would turned off the antivirus for a while and turn it off. I rarely use my computer because mostly I do everything on my mobile device but since I started studying I really need and now it is not working. Please help me I don't know what to do and I don't have money to fix it or buy a new one


Sent from my iPhone using Tapatalk
 

A:My desktop all in one HP Omni 100Pc

Read other 7 answers
RELEVANCY SCORE 39.2

I have a HP Omni 27. The computer is out of warranty. I had to have the hard drive replaced about 5 or 6 months ago. This morning my computer was working fine. Now I got home from work and my computer is at a black screen. I have done the reset that was mentioned by unhooking everything and holding the power button for 30 seconds. Still black screen. Please HELP!

A:All in one Hp Omni 27 blank screen

Hi @tanya21001, May the Forums be with you! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that your Omni 27 is no longer  starting properly. I am happy to help with this. Please post the full product number and operating system on your Omni 27. See the following, if you need help with that information. How Do I Find My Model Number or Product Number?  Is the Windows Version on My Computer 32-bit or 64-bit? For now I will assume you are using either Windows 8.x or 10 so give this a try: HP Desktop PCs - Computer Does Not Start (Windows 10,8). Please let me know whether that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

Read other 1 answers
RELEVANCY SCORE 38.8

Hello,
 
I thought it was impossible to install a discrete graphics card inside a HP omni 27 because the fan pipes get in the way! Please can you shed some light onto this?

A:replace graphic card in HP omni 27

Hi, Please let us know what is your HP omni 27 ? It must be HP omni 27-xxxx . Regards.

Read other 2 answers
RELEVANCY SCORE 38.8

I need to know where is the video located on this unit, is it onboard or seperate?  Thanks

A:HP Omni 27-1210xt Video Location

PlunksComputers wrote:I need to know where is the video located on this unit, is it onboard or seperate?  ThanksThe graphics are integrated into the motherboard and not upgradeable.

Read other 4 answers
RELEVANCY SCORE 38.8

A couple days ago I received a message that stated usb unable to be read. when I click on computer w/ red "x" it tells me there are no connections available. I have wireless in my home and every other laptop, tablet, kindle connects and run. What do I need to do to get my connection back. I have already reset factory settings to no avail.  Thank you.

A:hp omni 100 pc will not connect to my WIRELESS NETWORK

Hi, I don't know omni100 but there should be a switch for open/close the wireless of notebook computer.the switch is at keyboard near Fn key or it is looks like a button locate at edge of the chassis. you can identify the switch as there is a mark like a radio emission.

Read other 4 answers
RELEVANCY SCORE 38.8

I have an HP Omni 10 running MS Windows 8.1.  I can log onto my system using a PIN, but I can't remember the original password, so I am unable to change the PIN or change the password.  How can I set up a new password?

A:How to reset a password on Omni 10 when you can't remember t...

If you are using a PIN then it is coupled to your Microsoft email account.  Log into your PC and then go to settings --> Accounts. Click on the Manage my Microsoft account link. Your Microsoft account will be identified and your will be able to change your password.

Read other 1 answers
RELEVANCY SCORE 38.8

I have Omni 200-5310 and NVIDIA GeForce G210 VGA adapter. When upgrading faced with the problem of replacing the video card on the NVIDIA Quadro K1100M according to the standard which should be suitable, is there any solutions? When enabled, NVIDIA Quadro K1100M screen is not responding, and the device emits 2 short and 1 long signal. Tried to find a new BIOS, but to no avail. Can tell me how to fix it or a suitable alternative graphics card performance, as all the other modules have improved. Intel Core i5-760 2.8GHz, Samsung 840 EVO SSD, 6 gb ddr3.Thank you.











Solved!
View Solution.

A:Help me! HP Omni 200-5310ru graphics update...

Hi there @victor282, May the Forums be with you!  It is a great place to find the help you need, from other users, HP experts, and other support personnel.  I understand that you are looking for some help related to a graphics card upgrade.  I am happy to help with this. When I searched your model, I found it is incomplete. That model has many regional versions; can you please post the 2 letter postscript to the model number, so I can be sure I am looking at the right one?  Sometimes, that can make a difference as to what is installed in the unit, although a common variation is going to be the wireless adapter, due to differeneces in the laws for wireless communications in different countries. Please let me know when you can.

Read other 5 answers
RELEVANCY SCORE 38.8

Hi folks,

I am looking at a high gain antenna to boost signal so it can reach thru a couple of walls down the hall. I was looking at an omnidirectional antenna (an outdoor whip style) which has 15db and a horizontal range of 360 degrees, but only 6 degrees vertical. Is the 6 degrees vertical a big problem if the computers i am trying to reach are all on the same floor? Is it ok to use the higher powered outdoor antennas for indoor use? (The indoor ones seem to have much lower db strength).

I am also planning to pick up a 6db desktop omni antenna to place on the back of the wireless pci card to further help my signal.

I could go for antennas with 80 horiz and 80 vertical but they are only 8db..... and i figured the higher db and 360 horiz would prove better. Am i wrong?
 

A:Question about Omni vs Directional Antennas

If you need to get more vertical out of the antenna, just angle it, though that could raise the swr of the antenna, which will lower the signal a bit.

Indoor antennas have a lower gain because they are just meant to boost the signal to give you better signal through the whole house, or to reach one end to the other, if its a big house), the outdoor antenna is usually used when people are trying to use their wireless in the backyard, or in an outbuilding, maybe sharing with a neighbor.

Want more antenna info? here:
http://flakey.info/antenna/omni/quarter/
http://www.wlan.org.uk/antenna-page.html
http://www.turnpoint.net/wireless/cantennahowto.html
http://www.netscum.com/~clapp/wireless.html
http://www.cruftbox.com/cruft/docs/cantenna.html
http://www.nodomainname.co.uk/parabolic/parabolic.htm
http://www.csgnetwork.com/antennawncalc.html
http://bcwireless.net/moin.cgi/AntennaOverview
 

Read other 4 answers
RELEVANCY SCORE 38.8

My omni 10 5600 el won?t turn on. I feel vibrate it but it remains black. I tried several times also pushing the power bottom fo many secs or stop the plug in and wait before plug in again.  Thanks in advance       

Read other answers
RELEVANCY SCORE 38.8

Hello, I was trying to install Android Marshmellow on HP Omni 10. It was my fault actually that I deleted the partition. Therefore, no OS is there on the disk. The question comes to my brain - How can I fresh install windows 8.1 x32 using usb. I need to inform well wishers that I don't have any recovery media or backup drive etc. Is it possible or I need to go to the Service Centre? I hope, I will be guided by some very intelligent people. Thank you in advance

Read other answers
RELEVANCY SCORE 38.8

I have an Omni 200 all in one. It shutsdown periodically. It seems to be when watching video, but not all video. Any suggestions? Could this be a java issue? 

A:omni 200 shutdown watching video

Tomcat1015, welcome to the forum. This is normally a symptom of over-heating.  It would be good to find a diagnostic software that has a temperature reading.  Here is a Speedfan.  As soon as it shuts down you should boot and check the temps. Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.  

Read other 2 answers
RELEVANCY SCORE 38.8

hi i have an issue with the audio.there is no sound after windows 8.1 upgrade.when im in game mode- the sound works perfectly. but when im trying yo hear music from my computer or just go into Youtube- there is no sound. i tried to check for driver update but the system is telling me that i have the updated version. thanks!Mor

Read other answers
RELEVANCY SCORE 38.8

I'm wondering if anyone is able to help me with obtaining a driver for my sister's webcam. It is an Omni DWC130. I've found a supplier who sells them but I can't find any sites that have drivers for it. Is anyone able to help please? She is running Windows XP SP2.

Thanks for any help you may be able to offer

Stephie
 

A:Driver for Webcam - Omni DWC130

I couldn't find anything specifically for that camera but I would go here, download all of the reference drivers, unzip them and then point windows to each folder one at a time during the install and see if it finds one it likes/will work. Got nothing to lose at this point. you could also contact omni and see if they will email you a download link.
 

Read other 1 answers
RELEVANCY SCORE 38.8

                                                                                                                                                                                                                                                          ... Read more

Read other answers
RELEVANCY SCORE 38.8

Hi People of the tech world. I have just brought an omni DMP 101 media player which I had hoped would allow me to take my Photos music and videos on holiday with me to show to family members who don't have a pc .
Problem: I attached media to pc via USB 2 pc recognised Samsung hard disk and installed hardware. I copied the files to the new HD then checked on the computer to make sure they were really there . Then I attached Av cable to TV and external power to player . Message on screen to say initialising then a ping sound then a screen with the word root highlighted. Pressed the photo button on the provided remote and a message came up no file in this mode. the same for the music and video buttons.
The player can also read memory cards .It played the video files from my memory stick and the photos but when I tried to copy them to the hard disk a message came up to say it was copying to hd and to press stop to abort. I had one thirty second video file and three photos when nothing had happened for fifteen minutes I pressed the stop to abort but nothing happened and i had to turn off the player to stop it.
The manual that came with this product is useless.

Specs;

power adapter; 5VCD/2A
Hard Disk ; 1.8`/2.5`
CF?SD?MMC?
MS ;4mg to1gb
interface :USB2.0
USB R/W
Speed ;480Mb/s
File Type ;FAT32/16
File Format ;mpeg-1,mpeg-2,mpeg-4,MP3,JPEG,WMA
Support OS
(USB2.0) ; windows 2000,XP (no driver)
Video out
System ;Pal/NTSC
Out Interface ;VGA. AV, Stereo
Dimension ;154mm x90mm x2... Read more

Read other answers
RELEVANCY SCORE 38.8

I am considering removing the 1tb Hitachi hard drive inside my Hp Omni allinone computer and replacing it with a solid state drive, but there's a few things I'm uncertain about. First off, I don't know if the Hitachi hard drive inside my system is the standard 3.5 size. Here are the models in my price range that I am considering...   Mushkin MKNSSDRE1TB Reactor 1TB 6Gb SATA III 2.5inch SSDSanDisk Ultra II 960GB SATA III 2.5-Inch 7mm Height Solid State Drive (SSD) with Read Up To 550MB/s-...Samsung 850 EVO 1TB 2.5-Inch SATA III Internal SSD (MZ-75E1T0B/AM)Crucial MX300 1TB SATA 2.5 Inch Internal Solid State Drive - CT1050MX300SSD1    So, they all appear to be similiar, which brings me to my next question. I'm thinking the hard drive in my all in one may be mounted inside there differently than what is standard, then if so, are there mounting brackets that will fasten down, hold the new drive in place properly, and still enough space for the back panel to snap down? Then my last concern before I purchase anything is the resulting performance of installing the ssd. Since I still have the AMD E-450 processor that runs at a measly 1.6 Ghz. From my understanding, because the way these allinones are built, there isn't any options for processor/motherboard, or at least none I know of that would be considered an upgrade. So, with the same processor/motherboard in there, would there be enough performance improvement to justify the time, cost and ... Read more

Read other answers
RELEVANCY SCORE 38.8

Hi there,

I have 2 machines, a Sony Vaio VGC-LS1 & a Dell XPS1730 laptop.....not on a network....using zoom adsl X6 modem for both.

Needed help to unintsall 2 softwares: Sonic encoders & Image Station....I get an error using Revo......need this file C:\abu\software603703.SND\ but I cannot find its location.

Contacted Sony neither they could help depite taking remote acess of the machine. Ran a PC health & gave me this report.

1. "The computer's video card is unsatisfactory "

Your computer's video card has been checked and is found to be not as per recommendations
The video card application demands a lot of space and resources from your computer. Thus it is essential to assess the requirements of this application to determine the condition of your computer.
I am using there own bultin Intel 945 GM graphic acelerator??

2. "The Internet Connection Sharing Service needs to be disabled "

The Internet Connection Sharing Service has been enabled.
The Internet Connection Sharing (ICS) service is applicable to provide network address translation, addressing, name resolution and/or intrusion prevention services to a home computer or small office network. This service helps multiple users on your network to browse through a single account. You need to enable this service if your computer is in a network but can be disabled otherwise.

3. "Non optimal internet configuration settings "

Your current internet configuration settings... Read more

Read other answers