Over 1 million tech questions and answers.

my hp window8 want let me get pass the welcome and it start ...

Q: my hp window8 want let me get pass the welcome and it start ...

My HP laptop window 8 want let me get pass welcome page go on internet because the screen is flashing

Read other answers
Preferred Solution: my hp window8 want let me get pass the welcome and it start ...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


i have windows 8 single language(oem) asus laptop. a few days i got blue screen error but i couldnt read what writing bucause it turned quickly repair screen. 3 or 4 hours wait it but nothing changed.
now, computer wait in acer logo when i started and cant pass it just work
tried: with w8 single langage dvd (not me, my friends created it his laptop,)
f12 key, chosed drive inserted, booted but it wait a few minutes windows logo and turn blue screen: your pc ran into problem error, restart again, tried same error, same error...
is there any opinion help for solve this problem?
sorry my english.

A:Win 8 start but dont pass logo screen

If I had to make a guess, Id say you are looking at a hardware issue. By the way it sounds probably a failed hard drive.

If you have another computer that is functional or know someone that does, ask them to download and burn Falcon Four Ultimate Boot CD to a CD/DVD for you. This has a handful of hard drive testing utilities on it which will help you identify it as a failed hard drive.

Otherwise I would say RAM issue. That same boot CD contains MemTest86. If the hard drive scans come up clean, run MemTest86 for at least 8 passes for conclusive results.

Read other 2 answers

Hello, all. Hope someone can help me out:

My main problem is that whenever I turn my computer on (dell dimension 520) it suddenly freezes on the screen that proceeds the "Hit F2 / HIT F12" screen. The blinking cursor at the bottom of the screen will pulse but the computer won't load from there.

Here's some history on the computer:

I accidentally infected my computer with a virus after clicking a link a friend sent me. I removed it using Windows Live One Care. Once I removed the virus I would see two error messages appear whenever I started up my computer. I can't remember what they were named -- they were 'could not locate file' messages. I just assumed they were remnants from the viruses I removed.

A few days ago my computer began to run slowly. I noticed this coincided with a automatic update from Windows. I couldn't start my computer normally from then on, I could only access in safe mode. I used a restore point to go back to before the automatic update and things seemed fine. However, I forgot to stop the automatic update from occuring again and the same situation occured.

The problem seemed fixed until accidentally removed Windows Live One Care while trying to uninstall a different program. I shut down my computer since it began to run really slowly before I could re-install One Care and from then on, again, I could only start in safe mode.

Finally my computer stopped loading at all and now freezes on the screen I mentioned above. I tried u... Read more

Read other answers

I have an acer aspire 7551-2560 laptop. Everytime we turn it on, it doesnt go pass the acer screen. I pressed th f2 button to go to the setup screen and it does take a while fo it to respond. When i got to the setup menu, the laptop froze and it takes a while for it to respond and when it did, I exit the setup screen and my laptop turn black and it said operating system not found.
can somebody please help me figure out whats wrong with my laptop? I have lots of files(baby pics of my daughter) that are precious and I wondernif they could still be saved., please help

A:laptop wont go pass the acer start up screen

"Operating system not found" would indicate a HDD fault. The slowness is likely the result of the BIOS waiting for the drive to respond. So most likely it will need a new HDD and the OS/software reloaded.

Read other 2 answers

I had terrifying moments. The Keyboard did NOT appear automatically on my ASUS ViVo Tab Smart tablet with Win10 when I tapped the PASS box to enter my Pass and to start the tablet. The same story - after switching the tablet OFF and ON many times.

With my dummy knowledge of computer matters there was now no way for using the tablet better than as a $500 paper weight. Luckily I recollected that a year ago I played with a Bluetooth keyboard with this tablet (never since) and luckily this connection still worked and I entered the Pass via Bluetooth and immediately activated in the tablet the Windows Tablet mode which fixed the problem.

My tablet got into the computer mode, where the screen keyboard did not appear automatically, as a result of downloading and installing a Norton virus protection application. It was done by a Norton associate but apparently the Norton is just set toward the computer mode.

What I try to understand and what I am asking to explain - Is it possible to activate a TABLET in the situation as I described (the tablet is in a mode with NO auto keyboard and a Pass must be entered to start it) IF NO BLUETOOTH keyboard is available? This could happen with many of us.

Thank you for attention

Read other answers

PLEASE HELP!!!!! Tried Safe Mode, Tried System recovery nothing will put me pass blue start up screen

A:My HP laptop with windows 7 with not go pass start up blue screen.

Use a hard reset to resolve hardware and software issues which works for all computers, not just HP Pavilions (minus the HP driver update step). That often helps with laptops having problems similar to yours. Post back how the system responds.

Read other 1 answers

Hi My Laptop was working fine. But yesterday I shutdown my Laptop generally and at evening, it doesn't start up. After pressing power button, it appear DEL Logo screen and suddenly goes to BIOS setup. It happens again and again every time I press power button, even I exit BIOS Setup, it start to loading OS but again goes to DEL Logo screen and then BIOS Setup screen. I cant do anything here.

I have captured a video with my mobile device and upload it on youtube for clear understanding what happening here, Please see it here: www.youtube.com/watch;feature=youtu.be 

I have also checked with pressing fn key + Pwoer Button to check system.  It show that every thing is okay. 

Please someone help me.......

A:My DEL Laptop don't start, it dont pass Del logo screen

Hi ,
Thank you for writing to us!
If the system comes up to the Dell Logo at the same time tap the F12 key and run complete Diagnostics on the system make a note of the error that comes up.
Kindly private message the service tag to the system.

Read other 3 answers

A̶̲̥̅♏ having issues updating my window8 64bit actually I want to install net framework3.5

A:window8 update

Are you starting a new thread on the same issue?

Microsoft net framework 3.5
How to enable .NET Framework 3.5 on Windows 8 in Offline Mode

Read other 1 answers

Hi All,
I tested the following attacks in Microsoft Advanced Threat Analytics and found them
not to be working.

Bruteforce Attack Pass-The-Ticket Pass-The-Hash Sensitive account exposed Using Plain-Text Authentication
I have tested other attacks like Reconnaissance
using DNS, Broken Trust, Honey Token account suspicious activities but they are working perfectly fine. I don't know
what's the issue with the above 4.
1. Bruteforce Attack:
I used thc-hydra-windows and triggered a dictionary attack using a list of passwords.

2. Pass-The-Ticket:
I used mimikatz to steal the kerberos ticket from a PC on which Admin is logged on. Impersonating an attacker, I copied the .kirbi file and Injected that file(using mimikatz again) to another PC on which a domain user is logged in.

3. Pass-The-Hash:
(Same as above)
4. Sensitive account exposed in plain text authentication:
I used mimikatz command 'sekurlsa :: logonpasswords' and was able to get passwords of all the users who logged on to that PC. But this was also not detected by MATA.

Please help me with the above issues. If possible, provide the tools using which I can trigger and detect those attacks.

Read other answers

My Win 7 start up has changed. Now the BIOS/Boot option  info page which normally stays for 1 second so unable to read it now stays on and I must press F1 to proceed. Then it displays the Choose OS page which has nothing but Win7 on it. How this change happened is a mystery.
I have no password to get to the desktop straight away which I want.  How to stop the BIOS page displaying until I press F1 and to bypass the Choose OS instruction?
Any help please.

A:Start up goes thru stationary Bios info page and 'Choose OS ' How to pass up?

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 

Read other 6 answers

Just reset to factory settings. Will not start up right. Sometimes hangs on different screens. Loose mouse pointer, restarts itself. I did a hard reset numerous times, did system BIOS recovery. Did a start up test and it said start up failed. please help!

A:My laptop didn't pass the startup test. Won't start up prop...

Can you test the hard disk and the memory? Is the notebook about four or five years old?  That is just a guess, but expect it is somewhere in the ballpark. Hard disks do fail and operating system installations also. 

Read other 6 answers

Ok so i am furious with Micro$oft now! the other day i was FORCED to change my microsoft account after much nagging i did so and i dont like changing logins too much. (this was a week ago)
now for some random reason on earth without my permission my windows login also changed login passwords to the microsoft account. I DONT WANT THAT! that password is too long and complicated for someone who locks his computer every 5 minutes or so. why did this just kick in now? i changed M$ account pass over a week ago and today it decides to change windows login?! can i change JUST my local windows login separate from microsoft login?
if i try to change pass from settings it it goes online and says you cant use password that has been used before.

A:Can i change windows login pass without changing microsoft pass too?

Originally Posted by xdarkmario

Ok so i am furious with Micro$oft now! the other day i was FORCED to change my microsoft account after much nagging i did so and i dont like changing logins too much. (this was a week ago)
now for some random reason on earth without my permission my windows login also changed login passwords to the microsoft account. I DONT WANT THAT! that password is too long and complicated for someone who locks his computer every 5 minutes or so. why did this just kick in now? i changed M$ account pass over a week ago and today it decides to change windows login?! can i change JUST my local windows login separate from microsoft login?
if i try to change pass from settings it it goes online and says you cant use password that has been used before.

Don't go for a password. Use the PIN option That's just what you need and it's really a great thing as well.

Read other 4 answers

I'm getting the famous enter admin pass on boot (no BIOS update, laptop been off for a year (no OS atm) and I just started trying to fix it.  The error code I get is: [ 54549743 ] I hope that helps get my mobo unlocked!

View Solution.

A:HP-2000 Enter Admin Pass/Power on Pass at Boot

@PoetheProgrammr? Enter    41421385 Regards, DP-K

Read other 2 answers

I have recently installed ATA (1.8.6645.28499). It is now in to the second week of its learning phase and it is raising a considerable number of false pass-the-hash alerts when users initiate Citrix sessions from their usual PC using pass-thru authentication,
eg a typical alert would be:
Bloggs,Fred's hash was stolen from one of the computers previously logged into by Bloggs,Fred and used from xx1234
Clearly this is spurious - in each case the user is initiating a Citrix session from their
own PC and the xx1234 represents a Citrix server in the farm in every case.
1) Why am I only receiving a handful of related PTH alerts each day when I have many thousands of Citrix users, all authenticating in the same manner?
2) How can I supress these alerts?
What I effectively want to say is 'IF the suspected PTH is being triggered BY the user on their OWN PC and the target server is in our Citrix farm' then ignore it. I can't see a way of setting an exclusion range like this for PTH events though?

Read other answers

please help.me

View Solution.

A:I can't open my hp window8.1 from sleep mode

Please help me

Read other 2 answers

Hi,Apologies if this has been answered already, but I couldn't find anything on the boards. My ideapad is showing error saying PC needs to be repaired. error code 0xc0000098. I thought I could use my Windows 8 disc to recover/repair, but when using the Repair facility (Repair > Troubleshoot > Refresh your PC) I get the message "drive is locked". Microsoft tell me this is something only Lenovo can help with... Does anyone have an idea what I might need to do? I can't pull the drive out or send the pc away - it's my Mum's; she's visiting and lives on another continent... Many thanks for your help!!Marc

A:Trying to repair Window8 but "drive is locked"

Is it possible you have bitlocker turned on?

Read other 1 answers

After updating from window 8 to window 10 my sleekbook WiFi not working. Provide solutions please

Read other answers

Using Window 8.1, today I get updates and than it say update not complete undoing changes....... but it stuck here. I does system restore but I get error on this
Which is unspecified error accured during system restore (0*80070017). And I don`t have sysm image to do system image recovery.. please help me it ruined my whole day..

Read other answers

Dear Tech guyz,
I've got this Dell laptop with Windows8 pre-installed.
I don't like this windows8 would therefore want to downgrade to windows7 without having to run clean install.

Is there a way out?

A:Downgrading window8 to windows7 without Clean Install

Read other 8 answers

i have a hp touchsmart 610-1000 i forgot my power on password i need some help to get on my computer

A:i have a touchsmart 610-1000 cant get pass the power on pass...

 Hi, Attach the completed model number, for example 610-1031f How Do I Find My Model Number or Product Number?

Read other 3 answers

Hello guys
Yesterday I updated Winndows 8.1 Preview to Windows 8.1 Final version,but when I reboot, this appeared.And I cant activate Windows.What I have to do .

A:Windows 8.1 Preview after updating final version Window8.1

Are they asking for a product key ?

Read other 13 answers

this could be somewhat complicated and should be either in driver section, or installation section or could be on both windows 7 and 8 forum.

here goes.. recently im into SSDs and usb 3.0 so i got myself a usb 3.0 flash drive, made it bootable with window 7 files on it and then install window 7 from flashdrive to my ssd which takes about 3 mins, very fast.

since window 7 natively does not support usb 3.0, i had to install usb3 drivers during installation screen which is a hassle because i have 4 laptops, which all have usb 3.0 ports, but each laptop uses different usb 3.0 drivers and thats where my problem is.

i could slipstream usb 3 driver into win7 install disc, then copy the disc files onto my flashdrive but then i would need 4 seperate flashdrives, or 4 times amount of files. then i thought about windows 8 which ive tried, it automatically detects usb 3.0 during installation screen just fine and of course theres no way it would know what drivers i am using, so obviously microsoft has a *general* usb3.0 driver they use themselves for windows 8.

if i can find that usb 3.0 drivers for windows 8, i should be able to slipstream into the window7 install cd, then of course copy it onto my flashdrive so i no longer have to install different usb 3.0 drivers everytime, correct?

plz help me out.. lol

A:slip stream MS window8 usb 3.0 driver into window 7 install CD

Chances are Win8 has most of the USB 3.0 drivers so that yours is able to be installed. Absent this I would simply get the driver from optional Windows Updates which is how the installer drivers are updated and missing drivers supplied shortly after Win7 install.

Short of that keep the USB 3. driver on stick to install in Device Manager.

If you want to try to slipstream the Win8 USB 3 driver into your 7 installer using 7Lite to see if it will work, then that might be a fun project but hardly necessary.

Read other 6 answers

High Pitched Chipmonk Audio on Window8 with Realtek HD

Recently my laptop started sounding like the Chipmonks, with a higher pitch, set to all of the sounds coming out my computer. After reading dozens of useless posts, I came to the conclusion that this 'must be a settings' issue, and started looking around. The culprit, in my case, was a setting for Realtek HD sound card. This is what I did to correct it:

1. Put on some music or sound for monitoring.
2. Right-click on the (little red speaker) icon, for the Realtek HD sound card on the toolbar (or find in programs).
3. Click on 'Sound Manager'
4. Click on 'Sound Effects'
5. Find the 'Karaoke' setting.
6. Set it to '+0'
7. IMPORTANT: Click 'ok' on the bottom right corner.

That should do it.
Setting that Karaoke tab up will increase the sound pitch for all audio on the computer. Setting it down, will lower the pitch for all of the audio. I hope this helps someone out there.

Read other answers

Sigh, I guess I will start from downloading IOBIT advanced system care and then it asked me to update my driver and now I have this driver failure thing where I'm unable to login to window, I've googled so much and now I'm in need of the rescue disc file for rebooting so I can perform system restoration, but I'm unable to download it from the window official website because I don't have the registration key... it was installed for me at the shop so I never had a disc.

I've actually downloaded the disc else where and installed it onto a USB but it didn't seem to detect the USB at all, I did perform F2 , boot mode and put all my USB drives to the top as my priority, I don't know if the files were corrupted at the beginning so now I'm hoping if someone can help....

Many thanks


Read other answers

Currently I have a pc with Windows 7 32bit installed on it. I have a disk with Windows 8.1 Pro 64 bit which I would like to dual boot with the current Windows 7 32bit . i have 2gb ram ,500gb hd 4 parttion Once I restarted my pc with the dvd in it, it asked me if I wanted to boot from Cd/DVD which I did. It then started the normal Windows setup screen. after saveral min this error show i/q error occure 0xc00000e9 what i do plz help

A:dual boot window7 bit and window8.1 64bit pro installation problem

it happened to me as well when i was trying to install Windows XP as dual boot with windows 7 home premium
i always get the blue screen due to the SATA driver that xp doe snot recognize my HD,,
but the people in the forum really do good help by pointing me to virtualize xp INSIDE W7..
IT works using VMware , why do not you use the same thing
or do you have another purpose of installing w8 as dual boot with w7

Read other 3 answers

I was installing Windows 8.1 from 8 on a Toshiba laptop. Lost Internet connection at the very last part of the download and couldn't reconnect. So I cut the computer off and when I cut it back on to reconnect so I could start over I was trying to reinstall Windows 8 as it suggested and it then went to a Choose an Option blue screen with 5 different options to choose from. I chose Continue Exit and Continue to Windows 8. It started loading but every time it goes back to the blue Choose an Option screen. I would just like to get back in to reconnect to the Internet so I can start the 8.1 update over. Thanks for any feedback.

A:After Failed 8.1 Update from Windows 8 Can't choose Exit and Continue to Window8

Have you tried to revert the pending update through Command Prompt that might hopefully solve the problem for you. But I'm afraid the update has already been applied then only a refresh can fix this problem, lets try the reverting first:
Open Troubleshoot
Choose Advanced Options
Choose Command Prompt
Then type DISM /image:C\ /cleanup-image /revertpendingactions and hit enter
Then type move C:\Windows\WinSxS\pending.xml C:\Windows\WinSxS\pending.old then hit enter
Reboot the device afterwards, if you get a FILE not found then replace C: with X: that might help ;) (See step by step video and guide here)

Read other 2 answers

Hello everyone and thank you in advance for reading this thread,

I have BSOD situation for a while. When I hibernate or put my computer asleep and leave this mode my computer freeze for a while before showing of a BSOD with driver power state faillure. I have windows 8 sometime it start freezing rightaway or sometime It happens like 10 sec later (after logging with my password). It bug also when I restart my computer the clean way. I first decided to solved this issue by doing a refresh of the system (I don't if it's the proper word as I and my window8 are French). It implies that all the softwares I have installed were erased but my files were saved. It might not have been my smartest move as it didn't change anything ....

I have run a whocrashed and it tells me that the issue come from a kernel &system :

On Sat 31/05/2014 15:18:22 GMT your computer crashed
crash dump file: C:\WINDOWS\Minidump\053114-281984-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7B440)
Bugcheck code: 0x9F (0x3, 0xFFFFFA8004629060, 0xFFFFF8012DDF47E0, 0xFFFFFA80045E8010)
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System


On Sat 31/05/2014 15:18:22 GMT your computer crashed
crash dump file: C:\WINDOWS\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bug... Read more

A:driver power state faillure -sleeping mode-ntoskrnl.exe-window8

Hi there,

Try updating your Intel rapid storage technology driver,

start end module name
fffff880`016e5000 fffff880`019af000 iaStorA (deferred)
Image path: \SystemRoot\System32\drivers\iaStorA.sys
Image name: iaStorA.sys
Timestamp: Mon Jul 09 13:42:33 2012 (4FFB4239)
CheckSum: 000AB20A
ImageSize: 002CA000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
There is a newer version here,

ASUSTeK Computer Inc. -Support- Drivers and Download K56CM

Under the others tab.

Have you tried updating your OS?

Microsoft Windows 8
Version du syst?me: 6.2.9200 N/A version 9200
Fabricant du syst?me d'exploitation: Microsoft Corporation
Configuration du syst?me d'exploitation: Station de travail autonome
Type de version du syst?me d'exploitation: Multiprocessor Free
Propri?taire enregistr?: Windows User
I only see a few updates installed. Have you tried updating to 8.1?

Read other 7 answers

Hello everyone! Can you help me with a (hopefully) simple problem?
I have a Access 2003 SQL Pass-thru query that I need to prompt the user for Begin Date and End date, then put these values in the query. I read the Help, but I still don't understand HOW!
Questions: (BTW, this query is being generated from the Switchboard)
1. How do I prompt the user for the dates in Access? I can't use parameters and I don't understand how to use a prompt otyher than that.
2. How do I get those user responses into the query below
3. How do I write the querydef?

The SQL query is attached


A:Prompt&Pass value to pass-thru query

Read other 16 answers

I removed Simple pass and validity software, and I am still required to enter the master password that simplepass asked me to set up, I uninstalled all drivers, and software, and removed all remnants from registry, and I am still required to enter the password at login, i have done the netplwiz thing,  and bios says password is clear, so how do i remove this password requirement that i didnt have before i installed simplepass.

Read other answers


im working on a Dell Latitude E6400 laptop and i need to do some work from home.
however, my new modem is not allowing my jobsite's vpn to pass thru so I can connect to it. How do i connect??

A:allow vpn to pass thru

msTHELP said:


im working on a Dell Latitude E6400 laptop and i need to do some work from home.
however, my new modem is not allowing my jobsite's vpn to pass thru so I can connect to it. How do i connect??Click to expand...

my wireless connection is in excellent connection by the way

Read other 2 answers

I've got a problem I'm hoping someone can help me with..

I've got a Belkin F5D8231-4 v2 N1 Wireless Router and a D-Link DSL-504G 4 Port Modem which I am trying to setup a VPN Connection through.
I'm using the built in VPN server in Windows XP Professional SP2, I can connect to the VPN internally but not externally - When trying to connect externally the client freezes up on "verifying username and password" but I dont think its even getting as far as connecting to the server.
I've opened up the ports in the firewall, and have forwarded port 1723 on TCP to the servers internal static IP address. The modem itself is running in Bridge mode to the router so I'm assuming that I don't have to open any ports or anything on that for it to work. I have contacted Belkin who assure me that a VPN can be established through that router, and weren't able to offer me much assistance.

what I've got setup is this:
modem ( ---> Router ( - - - - (wireless) - -> VPN Server (

I haven't actually been able to find anything that suggests that the clients are even getting through the modem and router to the server.. Any suggestions?

A:VPN Pass-Through

Read other 6 answers

I had purchased windows 2010 and xp pro as w many other programs. PAID 4 them with my earned dollar! n my pass keys do not work! I have paid good money, alot of money, on many of their programs! Why cant I have a pass key thats allowed to work since mine doesnt??!!??
Both times ive called microsoft, all they want to do is sell me another program. My pass keys should work if I purchased them with my money!!

A:pass key

We are not agents for Microsoft...and we are not obligated nor legally capable of answering questions regarding MS policies.
If you have a computer problem which deals with Windows XP...and you want someone here to try to assist you...please post some details of the problem, rather than comments regarding items relating solely to Microsoft and conduct of Microsoft business.

Read other 4 answers

I'm not sure if this is the right place to post this but i need to install some programs for my use and the administrator has placed UAC on everything i try to install , it's not the typical UAC but the one where you have to type a password before it lets you click yes. I can't seem to do anything , like task scheduler msconfig etc.

How do i get pass this?

A:Getting Pass W7 UAC

Sorry, but you don't. You will need your network administrator.

Read other 2 answers

I am having difficulties to enable VNP pass-through on my DFL-800 router. Iím not very familiar with some of the technical terms such as IPSec, PPTP, and L2TP and what do they actually do. My previous router Linksys RV082 had no problems. There was one option to disable or enable VPN pass-thought and everything was simple. I have setup up a VPN connection on my Windows XP and Vista and off I went. I could connect to my work network by supplying host name www.mycompany.com and my login credentials.

When I replaced my routers and try to connect, Windows connection hangs on Authenticating User Name and Password. And then fails saying that could not connect to a network.
Obviously my router blocks some communications.

Could you please let me know how to set-up this D-Link router as I am running out of ideas.
There is too many settings in this box to play with and Iím not really sure what to touch, how and what not to.

I have tried to play with IpRules Ė trying to create some and enable IPSec, PPTP, and L2TP one at the time but none of those attempts was successful.

Iím a little pissed off at my self at this moment that I have to use my old Linksys because I canít figure out how this new box works.

Please help!!!



Read other answers

home pc is password protected and I cannot remember it, tried every combo, no luck HELP!

A:by pass password

Please see the TSG Rules.

Passwords - Please do not ask for assistance with forgotten passwords and/or bypassing them. As there is no way to verify the actual situation and/or intentions, no assistance will be provided and any such threads will be closed., we no longer provide any help with lost passwords or getting around password protection. Obviously, we can't determine the real intent here, so our policy is to abstain from any assistance in these matters.Click to expand...


Read other 1 answers

How can I pass a value to a text box in php from an html submit form?

A:[php] How can I pass a value to a text box?

Just use, <? echo $variablename?> as the value for the textbox.

Read other 3 answers

I get a password pop up about every 20 minutes. The pop up requests user name and pass word. The areas for the information is filled in and when I click on OK or Cancel or the X to close the box the box goes away.
Not a major problem but would like to make it go away. This just started after SBC re-set my e-mail accounts. Several attempts to get a fix from them has not worked.

A:Pass word pop up

Read other 6 answers

Dear Team,

                     I am Forgot My Administrator Login Password,How to recover it

A:Win 8.1 Pass Recovery


This article may help you.

What to do if you forget your Windows password:

Best Regards,
mark the reply as an answer if you find it is helpful.
If you have feedback for TechNet Support, contact
[email protected]

Read other 2 answers

please I have forgotten my pass word

A:pass word

@dka2016? Power-on password or Windows login password??? REO

Read other 1 answers

On my H.P. Envy 15 j100 select,  non touch,  the simple pass kicks back a message saying, a referral was returned from the server. What does that mean and how do I do I fix it?  I already tried to reinstall the drivers, but the message still pops up.

A:H.P. Simple Pass

Far0ne wrote:On my H.P. Envy 15 j100 select,  non touch,  the simple pass kicks back a message saying, a referral was returned from the server. What does that mean and how do I do I fix it?  I already tried to reinstall the drivers, but the message still pops up.Hi, Whats the operating system you are using? Windows 7 or Windows 10?When did the problem started?What are the things youve tried so far to fix it? Regards

"Education costs money; so does Ignorance"If my post has helped you, click the Kudos Thumbs up!If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Read other 1 answers

On my H.P. Envy 15 j100 select non touch the simple pass kicks back a message saying, a referral was returned from the server. What does that mean and how do I do I fix it. I already tried to reinstall the drivers, but the message still pops up.

Read other answers

My husband and I are getting a divorce  he left our computer  on the only page that comes up is the one for him to put his pass word in to get on. I do not know his pass word and cand not get to the place to change users nor do I know how to by pass his pass word  HELP PLEASE

Read other answers

Hello everyone! After fresh instalation of Windows 7 there is no logon screen with password field and i'm sure i had it before with no password set. I've tried everything: netplwiz, tried to create another account, turn on Guest and there is only screen with users account but there is no password field after i click on my account. I repet, i'm sure i had it before. Does anyone have any idea what is going on?

A:No pass field

A fresh install will not have a logon screen unless you setup your account with a password.

Read other 9 answers

hello, everytime i restart my pc all my pass, gmail, hotmail changes! And i must do forgot pass function! I scanned with norton antivirus and didnt detected anything. HELP!

A:When i restart my pass changes

Since those are online services, your password for those sites can't be affected by restarting your machine.

Read other 1 answers

I have acer travelmate 420 series, it won't pass the windows xp logo. It kept on rebooting. I have tried to reboot from all the modes available still nnothing. tried to do recovery from cd it wont allow either. What else can be done to fix the problem.

A:Can't pass XP welcome logo

The hard drive is corrupt or bad...

Read other 5 answers

Hello, i would like to ask, recently i got email from an app that 2 ppl tryed to log into my acc from different locations, did not remember clicking or using something suspicious..my question is.. if my pc was hijacked why would you try to login to some 3rd party app using for communication instead of sth else? The app says the password was a valid one and it was a 12digit pass, is it possible just for that one pass to be leaked or if i click on sth all are leaked or any hints
Besr regards

A:Pass leaked

What is this "App" called?

Read other 1 answers